# Airbus Mandatory Service Bulletin A340-55-4038

Copy: No revision named ("U.S. DOT/FAA - Service Bulletin - A340-55-4038"), 76 pages: PDF https://openairdocs.org/files/sha256/c1/51/c1513313b35f8c16272ef0647f56de8a330255ce25999af8a0db11a9475eca13; text https://openairdocs.org/service-documents/airbus/a340-55-4038/file/c1513313b35f.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2011-0387; AD 2011-18-22 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Mandatory Service Bulletin)
- Number: A340-55-4038
- Page: https://openairdocs.org/service-documents/airbus/a340-55-4038

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2011-18-22](https://openairdocs.org/ad/2011-18-22.md), effective Oct 18, 2011: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/a340-55-4038/proposed.md).

## Text (76 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2011-0387; AD 2011-18-22 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

©A340
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
Tel: (33) 5 61 93 33 33
Telex : AIRBU 530526F
Fax : (33) 5 61 93 42 51
This summary is for information only and is not approved for modification of the aircraft.
MANDATORY MANDATORY MANDATORY
ATA SYSTEM: 55
TITLE: STABILIZER - RUDDER - A340 RUDDER DEBOND INSPECTION
**CONF ALL
MODIFICATIONS
None
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
On AIRBUS Single Aisle and Long Range family aircraft, the rudder side shell is a sandwich structure
made of Carbon Fiber Reinforced Plastic (CFRP) and Glass Fiber Reinforced Plastic (GFRP) with a
honeycomb core. A debonding in a rudder shell was found on the rudder of an A319 and an A321
aircraft. A large rudder debond, resulting from an undetected damage growth, could affect the handling
quality of the aircraft. Under specific conditions, a large debond could lead to aircraft in-flight instability.
A review of the production records revealed that the debonding reported on both rudders correspond to
This Service Bulletin details the inspection procedure to inspect the reworked areas on affected rudders
fitted on A340 aircraft for potential debonding.
Due to the different areas on the rudder to be inspected, different inspection procedures are necessary:
- Vacuum loss inspection
- Elasticity Laminate Checker (ELCH) inspection
- Tap test inspection
- Thermography inspection
- Ultrasound (US) inspection.
The accomplishment of this Service Bulletin will ensure the detection of potential debonding in the
reworked areas.
DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 1
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 2 (OCR)

DA340
SERVICE BULLETIN
SUMMARY
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE  MANDATORY  CANCELS INSPECTION SB  ¡NO
POTENTIAL AD  YES  A/C OPERATION AFFECTED
RELIABILITY AFFECTED  NO  PAX COMFORT AFFECTED  NO
COST SAVING  NO  LROPS AFFECTED  NO
STRUCTURAL LIFE EXTN  NO  VENDOR SB INVOLVED  NO
MATERIAL PRICE INFORMATION
**CONF 001
No Material
**CONF 002
No Material
EFFECTIVITY
**CONF ALL
This Service Bulletin is applicable to this (these) operator(s) :
44W  47W  56W  AAW AFR ALK  ARG  AWW B3R  CAL  CCA  CES  CPA
DGA DLH FIN  GFA HFY IBE  KAC  LAN  LHT  M3R  MAU  MSR  NMB
OAL  PAL  QAF  R3L  RJA S3R  I SAA  SAS  SFW  SLM  SVW  SWR  TAP
THT THY UAE VCV VIR XAX
CONCURRENT REQUIREMENTS
None
REFERENCES / REPERCUSSIONS
TFU  55.41.13.001
OEB  None
AOT  55-A4036
SIL  None
LINE MAINTENANCE AFFECTED  No
LIFE LIMIT  None
OTHER  SBIT 914.0808/09
NATURE OF THE WORK
AIRCRAFT  YES
EQUIPMENT  NO
HARD  NO
SOFT  NO
OBRM  NO
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 2
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 3 (OCR)

©A340
SERVICE BULLETIN
SUMMARY
MANPOWER
**CONF 001
Task 554038-832-848-001: Inspection
TOTAL MANHOURS  2.00
**CONF 002
Task 554038-832-848-001: Inspection
TOTAL MANHOURS  2.00
APPENDICES
**CONF ALL
None
6 DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 3
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 4 (OCR)

... ..  ©A340
SERVICE BULLETIN
SUMMARY
This Page Intentionally Left Blank
6 DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 4
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved

### Page 5 (OCR)

©A340
SERVICE BULLETIN
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
Tel: (33) 5 61 93 33 33
Telex : AIRBU 530526F
Fax : (33) 5 61 93 42 51
MANDATORY MANDATORY MANDATORY
ATA SYSTEM: 55
TITLE: STABILIZER - RUDDER - A340 RUDDER DEBOND INSPECTION
MODIFICATION No.:  None
This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the
property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with
any information contained in it. It is delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall not be used for any purpose other than
that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall
not be duplicated in any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the conditions herein), without
AIRBUS prior written consent.
1.  PLANNING INFORMATION
**CONF ALL
A. EFFECTIVITY
(1) Models
340-211 340-212 340-213 340-311 340-312 340-313
(2) Effectivity by MSN
0002-0009 0011 0013-0015 0018-0029 0031-0035 0038 0041 0043-0044 0046-0049
0051-0053 0056-0058 0061 0063 0074-0076 0078-0081 0084-0085 0088-0091
0093-0094 0101 0104 0114-0115 0117 0123 0125-0126 0128-0129 0131 0133-0137
0139 0141-0142 0145-0147 0149-0152 0154 0156-0161 0163
0173-0176 0178-0180 0182 0185-0187 0190 0192-0194 0196  197 0199 0201-0202
0204 0207-0208 0210 0212-0218 0220-0221 0225 0227-0228 0233 0235-0237 0239
0242-0243 0245-0246 0252 0257 0260 0263-0264 0268 0270 0273-0274 0278 0280
0282 0292 0297 0302 0304 0307 0310 0318-0319 0321 0325 0327 0329 0331-0332
0335 0347 0352 0354-0355 0359 0363 0367 0373-0374 0377-0379 0381 0385 0387
0390 0395 0399 0402 0406 0411 0413-0415 0424 0429-0430 0433-0435 0438 0442
0446-0447 0450 0459 0467 0470 0474 0483 0528 0538 0541 0544-0546 0554 0556
0559 0561-0562 0582 0585 0590 0598 0643 0646 0651 0668 0793 0800 0835 0844
0921 0938 0955
DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 1
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved

### Page 6 (OCR)

GA340
SERVICE BULLETIN
(3) Effectivity by Operator
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting trom transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
OPERATOR  MSN
44W  0007
47W  0009
56W  0013
AAW  0151
AFR  0029 0078 0084 0168 0174 0186 0207 0210 0237 0245 0246 0260
0307 0310 0319 0373 0377 0399
ALK  0032 0033 0034 0367 0374
JARG  0048 0063 0074 0080 0085 0093
AWW  0094
B3R  0046
CAL  0402 0406 0411 0415 0433 0541
CCA  0192 0199 0201 0242 0243 0264
CES  0129 0131 0141 0161 0182
CPA  0123 0126 0128 0136 0137 0142 0147 0157 0160 0208 0218 0220
0227 0228 0381
DIGA  0075 0081
DLH  0020 0024 0027 0028 0035 0052 0053 0056 0135 0158 0213 0233
0252 0297 0304 0321 0325 0327 0335 0347 0352 0354 0355 0379
0390 0434 0447
FIN  0058 0835 0844 0921 0938
GFA  0133 0212 0215 0282 0554
0117
IBE  0005 0088 0125 0134 0145 0146 0170 0193 0197 0217 0221 0302
0318 0329 0332 0378 0387 0414 0459 0474 0483
KAC  0089 0090 0101 0104
LAN  0167 0359 0363 0429 0442
LHT  0274
M3R  0061
MAU  0076 0152 0194 0268 0793 0800
•MSR  0156 0159 0178
NMB  0047 0051
OAL  0235 0239 0280 0292
PAL  0173 0176 0187 0196
QAF  0026 0528
R3L  0004
RJA  0014 0022 0038 0043
S3R  0204
SAA  0006 0008 0011 0018 0019 0021 0544 0582 0590 0643 0646 0651
SAS  0413 0424 0430 0435 0450 0467 0470
SEW  0015
DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 2
Printed in FRANCE  © AIRBUS S.A.S. 2007. All rights reserved

### Page 7 (OCR)

GA340
SERVICE BULLETIN
OPERATOR  MSN
SLM  0049
SVW  0955
SWR  0150 0154 0169 0175 0179 0263 0538 0545 0546 0556 0559 0561
0562 0585 0598
TAP  0041 0044 0079 0091
THT  0385 0395 0438 0446 0668
THY  0023 0025 0057 0115 0180 0216 0257 0270 0331
UAE  0139 0149 0163 0166 0185 0190 0202 0236
VCV  0031
VIR  0002 0003 0114 0164 0214 0225
XAX  0273 0278
(4) Configuration by MSN
MSN  CONFIGURATION
0002 0003 0004 0005 0006 0007 0008 0009 0011 0013 0014  001
0015 0018 0019 0020 0021 0022 0023 0024 0025 0026 0027
0028 0029 0031 0032 0033 0034 0035 0038 0041 0043 0044
0046 0047 0048 0049 0051 0052 0053 0056 0057 0058 0061
0063 0074 0075 0076 0078 0079 0080  0081  0084 0085 0088
0089 0090 0091 0093 0094 0101 0104 0114  0115 0117 0123
0125 0126 0128 0129 0131  0133  • 0134  0135  0136 0137 0139
0141 0142 0145 0146  0147 0149  0150  0152 0154 0156
0157 0158 0159 0160 0161 0163 0164  0166  0167 0168 0169
0170 0173 0174 0175 0176 0178 0180  0182  0185 0187 0190
0192 0193 0194 0196 0197 0199 0201  0202 0204 0207 0208
0210 0212 0213 0214 0215 0216 0217  0218 0220 0221 0225
0227 0228 0233 0235 0236 0237 0239 0242 0243 0245 0246
0252 0257 0260 0263 0264 0268 0270  0273 0278 0280 0282
0292 0297 0302 0304 0307 0310 0318 0319 0321 0325 0327
0329 0331 0332 0335 0347 0352 0354 0355 0359 0363 0367
0373 0374 0377 0378 0379 0381 0385  0387 0390 0395 0399
0402 0406 0411 0413 0414 0415 0424 0429 0430 0433 0434
0435 0438 0442 0446 0447 0450 0459 0467 0470 0474 0483
0528 0538 0541 0544 0545 0546 0554 0556 0559 0561 0562
0582 0585 0590 0598 0643 0646 0651 0668 0793 0800 0835
0844 0921 0938 0955
0179 0186 0274  002
(5) Configuration definition
**CONF 001
is valid for aircrait with rudders which might have reworked areas to be inspected.
**CONF 002
is valid for aircraft with rudders which were already inspected one time during the
sampling.
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 3
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 8 (OCR)

A340
SERVICE BULLETIN
(6) Material Effectivity
MATERIAL  QTY PER A/C  SEE NOTES
Consumable CMLD01  1
B.  CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
On AIRBUS Single Aisle and Long Range family aircraft, the rudder side shell is a
sandwich structure made of Carbon Fiber Reinforced Plastic (CFP) and Glass Fiber
Reinforced Plastic (GFRP) with a honeycomb core. A debonding in a rudder shell was
found on the rudder of an A319 and an A321 aircraft. A large rudder debond, resulting
from an undetected damage growth, could affect the handling quality of the aircraft.
Under specific conditions, a large debond could lead to aircraft in-flight instability. A
review of the production records revealed that the debonding reported on both rudders
(2) Objective/Action
This Service Bulletin details the inspection procedure to inspect the reworked areas on
affected rudders fitted on A340 aircraft for potential debonding.
Due to the different areas on the rudder to be inspected, different inspection procedures
are necessary:
- Vacuum loss inspection
- Elasticity Laminate Checker (ELCH) inspection
- Tap test inspection
- Thermography inspection
- Ultrasound (US) inspection.
(3) Advantages
The accomplishment of this Service Bulletin will ensure the detection of potential
debonding in the reworked areas.
(4) Operational/Maintenance Consequences
None
D.  DESCRIPTION
To accomplish this Service Bulletin it is necessary to :
DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 4
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 9 (OCR)

GA340
SERVICE BULLETIN
**CONF 001
Task 554038-832-848-001: Inspection
ood the our eat monies her no san finess.
(2) Do the rudder special detailed inspection on aircraft with rudders which have
exceeded or will exceed 13000 FC within 21 months after the issue of this Service
Bulletin
**CONF 002
Task 554038-832-848-001: Inspection
(1) Do 2 additional repetitive special detailed inspections (ELCH)
**CONF ALL
E. COMPLIANCE
(1) Classification
MANDATORY
(2) Accomplishment Timescale
**CONF 001
Table 1. Config. 001 - Rudder special detailed inspection on aircraft with rudders which
will not exceed 13000 Flight Cycle (FC) within 21 months after the issue of this Service
Bulletin.
Area to be  Condition  Action  Compliance time  Repetitive interval
inspected
N/A  N/A  Identify the Serial  Within 21 months  N/A
Number of the  after the issue of
installed rudder  this SB
Area 1  NA  Vacuum loss  Within 21 months  IN/A
inspection in  after the issue of
accordance with  this SB
Subtask
554038-832-201
-002
Area 1  Damage  Report to AIRBUS  Before next flight  IN/A
indications found
during vacuum loss
inspection
Area 1  No damage  Report to AIRBUS  Within 10 days  N/A
indications found  after the vacuum
during vacuum loss  loss inspection
inspection
DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 5
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved

### Page 10 (OCR)

GA340
SERVICE BULLETIN
Area to be  Condition  Action  Compliance time  Repetitive interval
inspected
Area 1  No damage  Temporary option  Before next flight, if N/A
indications found  1: Close the  the temporary
during vacuum loss  inspection holes  option 2 or the
inspection  with adhesive tape  permanent
restoration have
not been
accomplished
Area 1  No damage  Temporary option  N/A  At intervals not
indications found  1: Do a detailed  exceeding 900 FH
during vacuum loss  inspection of the
inspection  restored area for
loose or lost
adhesive tape
Area 1  Loose or lost tape  Temporary option  Before next flight, if N/A
found  1: Close the  the temporary
inspection holes  option 2 or the
again with  permanent
adhesive tape  restoration have
not been
accomplished
Area 1  No damage  Temporary option  Within 21 months  N/A
indications found  1: Do the  after the vacuum
during vacuum loss  permanent  loss inspection
inspection  restoration. Do a
thermography or
ultrasound
inspection before
the resin injection
Area 1  No damage  Temporary option  Before next flight, if N/A
indications found  2: Close the  the temporary
during vacuum loss inspection holes  option 1 or the
inspection  with resin and  permanent
adhesive tape. Do  restoration have
a thermography or  not been
ultrasound  accomplished
inspection before
the resin injection
Area 1  Damage  Temporary option  Before next flight  N/A
indications found  2: Report to
during  AIRBUS
thermograpny or
ultrasound
Inspection
DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 11 (OCR)

GA340
SERVICE BULLETIN
Area to be  Condition  Action  Compliance time  Repetitive interval
inspected
Area 1  No damage  Temporary option  Within 21 months
indications found  2: Restore the  after the vacuum
during  surface protection  loss inspection
thermography or
ultrasound
inspection
Area 1  No damage  Permanent  Before next flight  N/A
indications found  restoration: Do a  after the vacuum
during vacuum loss  thermography or  loss inspection or
inspection  ultrasound  within 21 months
inspection before  after the vacuum
the resin injection  loss inspection if
the temporary
option 1 or the
temporary option 2
has been
accomplished
Area 1  Damage  Permanent  Before next flight  N/A
indications found  restoration: Report
during  to AIRBUS
thermography or
ultrasound
inspection
Area 1  No damage  No further action  N/A  N/A
indications found  after
during  accomplishment of
thermography or  the permanent
ultrasound  restoration
inspection
Area 2  ELCH inspection in  Within 21 months  N/A
accordance with  after the issue of
Subtask  this SB
554038-832-201
-002
Area 2  Damage  Re-examine the  Before next flight  N/A
indications found  damage indications
during ELCH  as per tap test
inspection  inspection and
report to AIRBUS
Area 2  No damage  Report to AIRBUS  Report within 10  ELCH inspection
indications found  and do 2 additional  days after the 1.  within intervals
during ELCH  repetitive ELCH  ELCH inspection  between 4000 and
inspection  inspections  4500 FC
Area 2  Damage  Re-examine the  Before next flight  N/A
indications found  damage indications
during the 1. or 2.  as per tap test
additional repetitive inspection and
ELCH inspection  report to AIRBUS
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 12 (OCR)

©A340
SERVICE BULLETIN
Area to be  Condition  Action  Compliance time  Repetitive interval
inspected
Area 2  No damage  Report to AIRBUS  Report within 10  N/A
indications found  No further action  days after the
during the 2  ELCH inspection
additional repetitive
ELCH inspections
Table 2. Config. 001 - Rudder special detailed inspection on aircraft with rudders which
have already exceeded 13000 FC or will exceed 13000 FC within 21 months after the
issue of this Service Bulletin.
Area to be  Condition  Action  Compliance time  Repetitive interval
inspected
N/A  N/A  Identify the Serial  Within 1800 Flight  ¡ N/A
Number of the  Hours (FH) after
installed rudder  the issue of this
SB
Area 1  N/A  Vacuum loss  Within 1800 FH  N/A
inspection in  after the issue of
accordance with  this SB
Subtask
554038-832-202
-002
Area 1  Damage  Report to AIRBUS  Before next flight  N/A
indications found
during vacuum loss
inspection
Area 1  No damage  Temporary option  Before next flight, if N/A
indications found  1: Close the  the temporary
during vacuum loss  inspection holes  option 2 or the
inspection  with adhesive tape  permanent
restoration have
not been
accomplished
Area 1  No damage  Temporary option  At intervals not
indications found  1: Do a detailed  exceeding 900 FH
during vacuum loss  inspection of the
inspection  restored area for
loose or lost
adhesive tape
Area 1  Loose or lost tape  Temporary option  Before next flight, if N/A
found  1: Close the  the temporary
inspection holes  option 2 or the
again with  permanent
adhesive tape  restoration have
not been
accomplished
DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 8
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 13 (OCR)

©A340
SERVICE BULLETIN
Area to be  Condition  Action  Compliance time  Repetitive interval
inspected
Area 1  No damage  Temporary option  Within 21 months  NA
indications found  1: Do the  after the vacuum
during vacuum loss  permanent  loss inspection
inspection  restoration. Do a
thermography or
ultrasound
inspection before
the resin injection
Area 1  No damage  Temporary option  Before next flight, if N/A
indications found  2: Close the  the temporary
during vacuum loss  inspection holes  option 1 or the
inspection  with resin and  permanent
adhesive tape. Do  restoration have
a thermography or  not been
ultrasound  accomplished
inspection before
the resin injection
Area 1  Damage  Temporary option  Before next flight  N/A
indications found  2: Report to
during  AIRBUS
thermography or
ultrasound
Inspection
Area 1  No damage  Temporary option  Within 21 months  N/A
indications found  2: Restore the  after the vacuum
during  surface protection  loss inspection
thermography or
ultrasound
inspection
Area 1  No damage  Permanent  Before next flight  N/A
indications found  restoration: Do a  after the vacuum
during vacuum loss  thermography  loss inspection or
inspection  inspection before  within 21 months
the resin injection  after the vacuum
loss inspection if
the temporary
option 1 or the
temporary option 2
has been
accomplished
Area 1  Damage  Permanent  Before next flight  N/A
indications found  restoration: Report
during  to AIRBUS
thermography or
ultrasound
inspection
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 9
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 14 (OCR)

GA340
SERVICE BULLETIN
Area to be  Condition  Action  Compliance time  Repetitive interval
inspected
Area 1  No damage  No further action  N/A  N/A
indications found  after
during  accomplishment of
thermography or  the permanent
ultrasound  restoration
inspection
Area 2  N/A  ELCH inspection in  Within 21 months  N/A
accordance with  after the issue of
Subtask  this SB
554038-832-202
-002
Area 2  Damage  Re-examine the  Before next flight  IN/A
indications found  damage indications
during ELCH  as per tap test
inspection  inspection and
report to AIRBUS
Area 2  No damage  Report to AIRBUS  Report within 10  ELCH inspection
indications found  and do 2 additional  days after the 1.  within intervals
during ELCH  repetitive ELCH  ELCH inspection  between 4000 and
inspection  inspections  4500 FC
Area 2  Damage  Re-examine the  Before next flight  IN/A
indications found  damage indications
during the 1. or 2.  as per tap test
additional repetitive  inspection and
ELCH inspection  report to AIRBUS
Area 2  No damage  Report to AIRBUS  Report within 10  N/A
indications found  No further action  days after the
during the 2  ELCH inspection
additional repetitive
ELCH inspections
Accomplishment of this Service Bulletin is expected to be rendered mandatory by the
issue of an Airworthiness Directive (AD) published by the European Aviation Safety
Agency (EASA). It is anticipated that the AD will confirm the (thresholds and/or intervals
and/or date) given above but reference should be made to the AD for confirmation of the
mandated accomplishment timescale.
**CONF 002
Table 1. Config. 002 - Special detailed inspection (ELCH) on aircraft with rudders which
have already been inspected during the sampling
Area to be  Condition  Action  Compliance time  Repetitive interval
Inspected
N/A  N/A  Identify the Serial  Within 4000 FC  NA
Number of the  after the 1.
installed rudder  sampling
inspection
DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 10
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 15 (OCR)

GA340
SERVICE BULLETIN
Area 2  No damage  2 additional  N/A  Within intervals
indications found  repetitive ELCH  between 4000 and
during sampling (1. inspections in  4500 FC
ELCH inspection)  accordance with
subtask
554038-832-203-002
Area 2  Damage  Re-examine the  Before next flight  N/Ạ
indications found  damage indications
during the 1. or 2.  as per tap test
additional repetitive  inspection and
ELCH inspection  report to AIRBUS
Area 2  No damage  Report to AIRBUS  Report within 10  N/A
indications found  No further action  days after the
during the 2  ELCH inspection
additional repetitive
ELCH inspections
Accomplishment of this Service Bulletin is expected to be rendered mandatory by the
issue of an Airworthiness Directive (AD) published by the European Aviation Safety
Agency (EASA). It is anticipated that the AD will confirm the (thresholds and/or intervals
and/or date) given above but reference should be made to the AD for confirmation of the
mandated accomplishment timescale.
**CONF ALL
F. APPROVAL
Approved under EASA Design Organization Approval No. EASA 21J.031.
If an aircraft listed in the effectivity has a modification or repair embodied that is not of
AIRBUS origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator's circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also not
**CONF 001
Task 554038-832-848-001: Inspection
Get Access  1.00
On Aircraft
Do the rudder special detailed inspection on aircraft
with rudders which will not exceed 13000 FC within 21
months after the issue of this Service Bulletin
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 11
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 16 (OCR)

© A340
SERVICE BULLETIN
Task 554038-832-848-001: Inspection
Do the rudder special detailed inspection on aircraft
with rudders which have exceeded or will exceed
13000 FC within 21 months after the issue of this
Service Bulletin
Close-Up  1.00
TOTAL MANHOURS  2.00
NOTE:  Manhours and elapsed time depend on the size of the area to be inspected.
Find below a table with the information for the manhours, elapsed time and
number of persons per 1 m (39.37 in.) for the different inspection procedures:
Steps  Manhours  Elapsed time  Number of
persons
Get access  1.00  0.75  2
Rudder SN  0.25  0.25
identification
Vacuum inspection  2.00  1.50
Thermography  0.25  0.25  2
inspection
Ultrasound  0.25  0.25
Inspection
ELCH inspection  0.75  0.75
Tap inspection  0.25  0.25
Close-up  1.00  0.75  2
**CONF 002
Task 554038-832-848-001: Inspection
Get Access  1.00
On Aircraft
Do 2 additional repetitive special detailed inspections
(ELCH)
Close-Up  1.00
TOTAL MANHOURS  2.00
NOTE:  Manhours and elapsed time depend on the size of the area to be inspected.
Find below a table with the information for the manhours, elapsed time and
number of persons per 1 m (39.37 in.) for the different inspection procedures:
Steps  Manhours  Elapsed time  Number of
persons
Get access  1.00  0.75  2
ELCH inspection  0.75  0.75
Tap test inspection  0.25  0.25
Glose-up  1.00  0.75  2
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 12
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 17 (OCR)

©A340
SERVICE BULLETIN
**CONF ALL
H. WEIGHT AND BALANCE
Not Changed
L  ELECTRICAL LOAD DATA
Not Changed
J. REFERENCES
**CONF 001
Aircraft Maintenance Manual (AMM)  99-17-90  +Z-78-21  00-01-62
8-8-9  55-40-00
Consumable Material List (CML)
Non Destructive Test Manual (NTM)  51-10-03  51-10-19  51-10-24
51-10-25  51-10-26  51-10-28
Structural Repair Manual (SRM)  51-75-12  51-77-10  51-77-11
**CONF 002
Aircraft Maintenance Manual (AMM)  06-41-55  12-34-24  29-10-00
2-88-9  55-40-00
Consumable Material List (CML)
Non Destructive Test Manual (NTM)  51-10-03  51-10-19 51-10-26
**CONF ALL
K. PUBLICATION AFFECTED
None
L. INTERCHANGEABILITY/MIXABILITY
Not Applicable
M. SPARES
None
6 DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 13
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 18 (OCR)

©A340
SERVICE BULLETIN
This Page Intentionally Left Blank
6 DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 14
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 19 (OCR)

©A340
SERVICE BULLETIN
2. MATERIAL INFORMATION
**CONF ALL
A. MATERIAL - PRICE AND AVAILABILITY
(1) Procurement Addresses
This Service Bulletin is the subject of an AIRBUS monitored retrofit campaign.
(2) Price and Availability
None
B. INDUSTRY SUPPORT INFORMATION
AIRBUS will credit the manhours indicated in this Service Bulletin for inspections that are
performed on aircraft in warranty at the time of such inspection. Credit will be at the
operator's agreed in-house warranty labor rate. Claims for labor allowance should be received
This Service Bulletin is subject of specitic support provided by AIRBUS. For details please
contact your Customer Support Director.
For the organisation of this retrofit, operators are kindly requested to contact AIRBUS retrofit
management department. AIRBUS CUSTOMER SERVICES DIRECTORATE 1 Rond Point
Maurice Bellonte 31707 BLAGNAC CEDEX France Tel : (33) 5 67 19 06 22 E-mail
monitored.retrofit@airbus.com Fax : (33) 5 61 93 27 45
C.  LIST OF COMPONENTS
No Kit
D.  LIST OF MATERIALS - OPERATOR SUPPLIED
(1) Consumable Materials
Consumable CMLD01
ITEM DESCRIPTION  REFERENCE TO CML  QTY PER A/C  SEE
MAT. No.  NOTES
Self-Adhes. Disks  05-052  As required
Self Adhesive Aluminium Tape  08-052  As required
Solvent General Purpose  11-026  As required
Lint-Free Cotton Cloth  19-003  As required
Wet Lay Up Resin  20-022  As required
(2) Components
None
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 15
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 20 (OCR)

©A340
SERVICE BULLETIN
(3) Equipment
None
E.  PARTS TO BE RE-IDENTIFIED BY OPERATOR
None
F. TOOLING
(1) Tooling - Price and Availability
None
(2) Tools
To find the correct tool-PN for the different inspection tools, refer to the subsequent
table:
Inspection  TOO!  PN  NTM reference
ELCH  Elasticity Laminate  MBBBT100  51-10-26
Checker Kit
Vacuum loss  Vacuum cup  TL3AMB1420T28L  51-10-28
Thermography  Thermography kits  99A55407320000  51-10-25
(Camera and monitor)
and
99A55407321000
(complementary tooling
including hot air blower)
Ultrasound  US-equipment  EPOCH4PLUS  51-10-24
and
search unit K1SM
and
reference block
MBBGCFRPHC200
and
cable PKLL2
Tap test  tap test inspection tool  98A57103013000  51-10-03
or
99A55209001000
Tap test  Function test block  99A55407291000  51-10-19
and  and
Woodpecker  WP632
or
WP632AM
For more detailed information, refer to the related NTM chapter.
(3) Special Tools
None
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 16
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 21 (OCR)

GA340
SERVICE BULLETIN
3.  ACCOMPLISHMENT INSTRUCTIONS
Task 554038-832-848-001 - Inspection
WARNING:  MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
WARNING  PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION
BEFORE YOU START A TASK ON OR NEAR
THE FLIGHT CONTROLS
THE FLIGHT CONTROL SURFACES
- THE LANDING GEAR AND THE RELATED DOORS
COMPONENTS THAT MOVE.
WARNING  MAKE SURE THAT THE FLIGHT CONTROL SAFETY-LOCKS AND THE
WARNING NOTICES ARE IN POSITION.
CAUTION:  DO NOT CAUSE DAMAGE TO THE SURFACES. THE COMPONENTS ARE
MADE OF CARBONFIBER REINFORCED PLASTIC.
Task Associated Data
**CONF 001
Manpower
TOTAL MANHOURS  2.00
**CONF 002
Manpower
TOTAL MANHOURS  2.00
**CONF ALL
A. GENERAL
**CONF 001
(1) Subtask 554038-910-201-001 - Standard Practices
Manpower Resources
Skills  NON SPECIFIC
DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 17
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 22 (OCR)

DA340
SERVICE BULLETIN
Material necessary to do the job
Consumable CMLD01
ITEM DESCRIPTION  REFERENCE TO QTY PER A/C  I SEE
CML MAT. No.  NOTES
Solvent General Purpose  11-026  As required
Lint-Free Cotton Cloth  19-003  As required
References
Aircraft Maintenance Manual (AMM)  06-41-55, Page Block 001
Consumable Material List (CML)
(a) For location of the access panels, (Refer to AMM 06-41-55, Page Block 001).
(b)  For the specification of consumable materials (Mat. No.) that you must use in this
Service Bulletin, (Refer to Consumable Material List (CML)).
(c)  Clean the areas to be inspected with
Solvent General  11-026  As required
Purpose
and
Lint-Free Cotton  19-003  As required
Cloth
(2) Subtask 554038-839-201-001 - Documentation
Manpower Resources
Skills  NON SPECIFIC
(a)  Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 002
(1) Subtask 554038-910-201-001 - Standard Practices
Manpower Resources
Skills  NON SPECIFIC
Material necessary to do the job
Consumable CMLD01
ITEM DESCRIPTION  REFERENCE TO  QTY PER A/C  SEE
CML MAT. No.  NOTES
Solvent General Purpose  11-026  As required
Lint-Free Cotton Cloth  19-003  As required
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 18
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 23 (OCR)

GA340
SERVICE BULLETIN
References
Aircraft Maintenance Manual (AMM)  06-41-55, Page Block 001
Consumable Material List (CML)
(a) For location of the access panels, (Refer to AMM 06-41-55, Page Block 001).
(b) For the specification of consumable materials (Mat. No.) that you must use in this
Service Bulletin, (Refer to Consumable Material List (CML)).
(c) Clean the areas to be inspected with
Solvent General  11-026  As required
Purpose
and
Lint-Free Cotton  19-003  As required
Cloth
(2) Subtask 554038-839-201-001 - Documentation
Manpower Resources
Skills  NON SPEGIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF ALL
B. PREPARATION
**CONF 001
(1) Subtask 554038-941-201-001 - Job Set-up
Manpower Resources
Skills  NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)  Task 12-34-24-860-801
Task 29-10-00-864-001
Task 29-10-00-864-002
Task 29-10-00-864-003
55-33-13, Page Block 201
Task 55-40-00-210-001
(a) Make sure that the aircraft is electrically grounded (Refer to AMM Task
12-34-24-860-801).
Check the documentation of the related aircraft for further repairs on the rudder
during service. If you find documents about further repairs, contact AIRBUS for
further instructions.
DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 19
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 24 (OCR)

GA340
SERVICE BULLETIN
(c) In the cockpit, put warning notices in position to tell persons not to operate the flight
controls.
(d) Open, safety and tag the circuit breakers as given in the rudder inspection/check
Job Set-up procedure (Refer to AMM Task 55-40-00-210-001).
(e) Depressurize the Green Hydraulic System (Refer to AMM Task 29-10-00-864-001).
(f) Depressurize the Yellow Hydraulic System (Refer to AMM Task 29-10-00-864-002).
(g) Depressurize the Blue Hydraulic System (Refer to AMM Task 29-10-00-864-003).
(h) Put a warning notice in the cockpit to tell persons not to pressurize the hydraulic
systems.
(i) Put access platform(s) in position at the rudder.
To open the access panels, (Refer to AMM 55-33-13, Page Block 201).
**CONF 002
(1) Subtask 554038-941-201-001 - Job Set-up
Manpower Resources
Skills  NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)  Task 12-34-24-860-801
Task 29-10-00-864-001
Task 29-10-00-864-002
Task 29-10-00-864-003
55-33-13, Page Block 201
Task 55-40-00-210-001
(a) Make sure that the aircraft is electrically grounded (Refer to AMM Task
12-34-24-860-801).
(b) Check the documentation of the related aircraft for further repairs on the rudder
during service. If you find documents about further repairs, contact AIRBUS for
further instructions.
(c) In the cockpit, put warning notices in position to tell persons not to operate the flight
controls.
(d) Open, safety and tag the circuit breakers as given in the rudder inspection/check
Job Set-up procedure (Refer to AMM Task 55-40-00-210-001).
(e) Depressurize the Green Hydraulic System (Refer to AMM Task 29-10-00-864-001).
(f) Depressurize the Yellow Hydraulic System (Refer to AMM Task 29-10-00-864-002).
(g) Depressurize the Blue Hydraulic System (Refer to AMM Task 29-10-00-864-003).
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 20
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 25 (OCR)

©A340
SERVICE BULLETIN
(h) Put a warning notice in the cockpit to tell persons not to pressurize the hydraulic
systems.
=  Put access platform(s) in position at the rudder.
(j) To open the access panels, (Refer to AMM 55-33-13, Page Block 201).
**CONF ALL
C. PROCEDURE
**CONF 001
(1) Subtask 554038-832-201-002 - Do the rudder special detailed inspection on aircraft
with rudders which will not exceed 13000 FC within 21 months after the issue of
this Service Bulletin
Manpower Resources
Manhours
Minimum number of person
Subtask elapsed time
Skills  NON DESTRUCTIVE
TESTING
Material necessary to do the job
Consumable CMLD01
ITEM DESCRIPTION  REFERENCE TO  QTY PER A/C  SEE
CML MAT. No.  NOTES
Self-Adhes. Disks  05-052  As required
Self Adhesive Aluminium  08-052  As required
Tape
Solvent General Purpose  11-026  As required
Wet Lay Up Resin  20-022  As required
Heferences
Non Destructive Test Manual (NTM)  Task 51-10-03-280-801
Task 51-10-19-280-801
Task 51-10-24-270-801
Task 51-10-25-290-801
Task 51-10-25-290-802
Task 51-10-26-220-801
Task 51-10-28-220-801
Structural Repair Manual (SRM)  51-75-12
51-77-10
51-77-11 Para 4.M. (2)
51-77-11 Para 4.A. (3)
51-77-11 Para 5.
51-77-11 Para 4.E
DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 21
Printed in FRANCE  © AIRBUS S.A.S. 2007. All rights reserved.

### Page 26 (OCR)

©A340
SERVICE BULLETIN
References
Fig. A-GAAAA  Sheet 01 - Flow Chart 1, vacuum loss
Rudder inspection  inspection area 1
Sheet 02 - Vacuum loss inspection -
damage assessment
Sheet 03 - Flow Chart 2, ELCH inspection
area 2
Sheet 05 - Reporting sheet
Sheet 06 - Rudder SN identification
Sheet 07 - Inspection areas
Sheet 08 - Typical ELCH procedure
Sheet 09 - Rudder skin thickness LH
Sheet 10 - Rudder skin thickness RH
Sheet 11 - Rudder skin thickness LH
Sheet 12 - Rudder skin thickness RH
Sheet 13 - Rudder skin thickness LH
Sheet 14 - Rudder skin thickness RH
Sheet 15 - Rudder skin thickness LH
Sheet 16 - Rudder skin thickness RH
Sheet 17 - Rudder skin thickness LH
Sheet 18 - Rudder skin thickness RH
Fig. A-GACAA  Sheet 01
Rudder SN - MSN reference List  Sheet 02
Sneet 03
(a) Identify the Serial Number (SN) of the rudder as shown on Fig. A-GAAAA Sheet
(b) If you do not find an SN placard on the rudder, contact AIRBUS for further
instructions.
(c)  Compare the rudder SN with the rudder SNS in the rudder SN - MSN reference list
Fig. A-GACAA Sheet 01 thru Fig. A-GACAA Sheet 03.
If you find a different SN against the MSN as detailed in the rudder SN - MSN
reference list, contact AIRBUS for further instructions.
2 If the rudder SN is not part of the rudder SN - MSN reference list, refer to the
Close-up para 3.E. No further action is necessary.
If the rudder SN is part of the rudder SN - MSN reference list with the same
indicated MSN, continue with the below instructions.
The Technical Disposition (TD) details the location of the reworked area to be
inspected and includes information about the vacuum loss inspection holes, if
necessary.
1  For the definition of the areas to be inspected, refer to the reference list Fig.
A-GACAA Sheet 01 thru Fig. A-GACAA Sheet 03 to find the MSN related
Technical Disposition (TD) No.
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 22
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 27 (OCR)

GA340
SERVICE BULLETIN
2  To get the TD, refer to the SB BOOKLET-link on the index page of this
Service Bulletin on the Air@Nav Engineering page in AIRBUS WORLD and
For additional information, refer to SBIT SEMB 914.0808/09
Inspection method for reworked areas:
For reworked area astride AREA 1 and AREA 2, if TD provides vacuum
loss hole location then rework must be treated as if in AREA 1 only.
For reworked area astride AREA 1 and AREA 2, if TD does not provide
vacuum loss hole location then rework must be treated as if in AREA 2
only.
(e) If there are only areas on the trailing edge, shown as 'area 2' on the Fig. A-GAAAA
Sheet 07, to be inspected, refer to Para (g).
(T)  If there is the non-ventilated area, shown as 'area 1' on the Fig. A-GAAAA Sheet
Chart Fig. A-GAAAA Sheet 01 and Fig. A-GAAAA Sheet 02:
Do the vacuum loss inspection within 21 months after the issue of this Service
Bulletin (Refer to NTM Task 51-10-28-220-801).
Temporarily install adhesive foil on the areas to be inspected.
Mark the grid of holes on the adhesive foil.
CAUTION:  DRILL  PENETRATION INTO  THE SANDWICH
STRUCTURE HAS TO BE LIMITED TO 20mm (0.8 in.)
TO PREVENT INNER SKIN DAMAGE.
Drill the inspection holes with DIA 1.5 mm (0.06 in.) through the outer
skin only.
d Do the Vacuum loss inspection (Refer to NTM Task 51-10-28-220-801).
In case of damage indications, contact AIRBUS on the basis of a detailed
referenced damage report for further instructions before next flight.
in case of no damage indications, close the inspection holes as detailed
in the subsequent instructions and report the result to AIRBUS within 10
days.
2  Temporary restoration of the inspection holes option 1:
Close the holes with
Self Adhesive  08-052  As required
Aluminium Tape
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 23
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 28 (OCR)

©A340
SERVICE BULLETIN
or
Self-Adhes. Disks 05-052  As required
Do a detailed inspection of the restored area at intervals not exceeding
900 FH. Inspect the restored area for loose or lost adhesive disks or
tape.
In case of loose or lost tape or disks, close the holes again with
Self Adhesive  08-052  As required
Aluminium Tape
or
Self-Adhes. Disks 05-052  As required
This temporary restoration must be replaced by the permanent
restoration within 21 months after the vacuum loss inspection. For the
permanent restoration, refer to Para (1)4.
WARNING:  OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN
YOU USE CLEANING AGENTS, ADHESIVES, SEALANTS
AND PAINTS: THESE MATERIALS ARE DANGEROUS.
WARNING:  WEAR THE CORRECT PROTECTIVE GLOVES, GOGGLES
AND FILTER MASKS WHEN YOU USE CLEANING AGENTS,
ADHESIVES, SEALANTS AND PAINTS: THESE MATERIALS
ARE DANGEROUS.
Temporary restoration of the inspection holes option 2:
a  Before the resin injection:
<1> Identify the skin thickness of the areas to be inspected, refer to the
subsequent table:
Rudder SN  Refer to Figure
TS-1014, TS-1042  Fig. A-GAAAA Sheet 09 and Fig. A-GAAAA Sheet
10
TS-2004, TS-2005  Fig. A-GAAAA Sheet 11 and Fig. A-GAAAA Sheet
TS-2008 thru TS2010  12
TS-2022, TS-2023
TS-2028 thru TS-2030
TS-2032 thru TS-2034
TS-2041
TS-2044 thru TS-2046
TS-2048 thru TS-2050
TS-2057
TS-2067, TS-2068
TS-2071
DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 24
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 29 (OCR)

©A340
SERVICE BULLETIN
TS-3001  Fig. A-GAAAA Sheet 13 and Fig. A-GAAAA Sheet
14
TS-3012 thru TS-3014
TS-3017 thru TS-3032
Ts-3034 thru TS-3042
TS-3046, TS-3047, TS-3049, TS-3054, TS-3055
TS-3058,. TS-3060, TS-3062, TS-3063, TS-3065
TS-3067 thru TS-3070
TS-3077, TS-3078, TS-3080, TS-3081
TS-3086, TS-3089
TS-3092, TS-3093, TS-3095, TS-3096
TS-3098, TS-3099
TS-3101 thru TS-3105
TS-3108 thru TS-3112
TS-3114, TS-3116, TS-3117
TS-3120, TS-3128, TS-3131, TS-3132
TS-3212, TS-3323, TS-3330
TS-4009 thru TS-4018  Fig. A-GAAAA Sheet 15 and Fig. A-GAAAA Sheet
TS-4020, TS-4022, TS-4023  16
TS-4025 thru TS-4027
TS-4029 thru TS-4031
TS-4038, TS-4047, TS-4049, TS-4066
TS-4083  Fig. A-GAAAA Sheet 17 and Fig. A-GAAAA Sheet
18
<2> If the skin thickness of the affected areas, defined by the
TD, does not exceed 1.5 mm (0.06 in.), do a thermography
inspection as detailed in NTM Task 51-10-25-290-801 or NTM Task
51-10-25-290-802,
AND/OR
If the skin of the affected areas, defined by the TD, is thicker than
1.5 mm (0.06 in.), do an ultrasound inspection as detailed in NTM
Task 51-10-24-270-801.
NOTE:  During the ultrasound inspection, the  vacuum
inspection holes must be closed with thin adhesive
tape (Material No 08-052 - basic) to prevent couplant
ingress into the holes.
In case of damage indications contact AIRBUS for further instructions
before next flight.
C Prepare and dry the restoration area (Refer to SRM 51-77-11 Para
4.M. (2)).
d Prepare
Wet Lay Up Resin 20-022  As required
(Refer to SRM 51-77-11 Para 4.A. (3)).
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 25
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved

### Page 30 (OCR)

9A340
SERVICE BULLETIN
NOTE:  The data sheets for each adhesive, resin or low density
compound states the maximum quantity that can be
safely mixed at one time without causing an exotherm
reaction. Always refer to the appropriate data sheet
before mixing the chosen material.
Warm up the mixed resin to a maximum temperature of 45°C (113 F).
Put the resin in a syringe volume 10 ml with a needle DIA 1.0 mm (0.04
in.) and inject the resin through the hole into the cells of the honeycomb
core. Start the injection at the cell bottom and finish when the resin is
leaking out of the inspection hole.
g Close the filled holes with
Self Adhesive  08-052  As required
Aluminium Tape
or
Self-Adhes. Disks  05-052  As required
Let the resin cure for a minimum of 6 hours at room temperature. If
the room temperature is below 18°C (64F), extend the curing time in
accordance with the resin manufacturer recommendations and perform a
gelation test outside the restoration area. After resin gelation plus 2h, the
aircraft can be released to operations again.
Within 21 months after the vacuum loss inspection, do the final surface
restoration:
<1> Remove the self adhesive tape from the restoration areas.
<2> Inspect the restoration (Refer to SRM 51-77-11 Para 5.).
<3> Remove any surplus resin from the border area of the restoration.
Use abrasive cloth. Start with 280 grade and finish with 400 grade.
<4> Clean the restoration areas with
Solvent General 11-026  As required
Purpose
(Refer to SRM 51-77-11 Para 4.E).
<5> Restore the surface protection (Refer to SRM 51-75-12).
6 DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 26
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 31 (OCR)

©A340
SERVICE BULLETIN
4 Permanent restoration of the inspection holes:
a Before the resin injection:
<1> Identify the skin thickness of the areas to be inspected, refer to the
subsequent table:
Rudder SN  Refer to Figure
TS-1014, TS-1042  Fig. A-GAAAA Sheet 09 and Fig. A-GAAAA Sheet
10
TS-2004, TS-2005  Fig. A-GAAAA Sheet 11 and Fig. A-GAAAA Sheet
TS-2008 thru TS2010  12
TS-2022, TS-2023
TS-2028 thru TS-2030
TS-2032 thru TS-2034
TS-2044 thru TS-2046
TS-2048 thru TS-2050
TS-2057
TS-2067, TS-2068
Fig. A-GAAAA Sheet 13 and Fig. A-GAAAA Sheet
TS-3010  14
TS-3012 thru TS-3014
TS-3017 thru TS-3032
Ts-3034 thru TS-3042
TS-3046, TS-3047, TS-3049, TS-3054, TS-3055
TS-3058, TS-3060, TS-3062, TS-3063, TS-3065
TS-3067 thru TS-3070
TS-3077, TS-3078, TS-3080, TS-3081
TS-3086, TS-3089
TS-3092, TS-3093, TS-3095, TS-3096
TS-3098, TS-3099
TS-3101 thru TS-3105
TS-3108 thru TS-3112
TS-3114, TS-3116, TS-3117
TS-3120, TS-3128, TS-3131, TS-3132
TS-3212, TS-3323, TS-3330
TS-4009 thru TS-4018  Fig. A-GAAAA Sheet 15 and Fig. A-GAAAA Sheet
TS-4020, TS-4022, TS-4023  16
TS-4025 thru TS-4027
TS-4029 thru TS-4031
TS-4038, TS-4047, TS-4049, TS-4066
TS-4083  Fig. A-GAAAA Sheet 17 and Fig. A-GAAAA Sheet
18
<2> If the skin thickness of the affected areas, defined by the
TD, does not exceed 1.5 mm (0.06 in.), do a thermography
inspection as detailed in NTM Task 51-10-25-290-801 or NTM Task
51-10-25-290-802,
AND/OR
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 27
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 32 (OCR)

GA340
SERVICE BULLETIN
If the skin of the affected areas, defined by the TD, is thicker than
1.5 mm (0.06 in.), do an ultrasound inspection as detailed in NTM
Task 51-10-24-270-801.
NOTE:  During the ultrasound inspection,  the vacuum
inspection holes must be closed with thin adhesive
tape (Material No 08-052 - basic) to prevent couplant
ingress into the holes.
b  In case of damage indications contact AIRBUS for further instructions
before next flight.
WARNING:  OBEY THE MANUFACTURER'S INSTRUCTIONS
WHEN YOU USE CLEANING AGENTS, ADHESIVES,
SEALANTS AND PAINTS: THESE MATERIALS ARE
DANGEROUS.
WARNING:  WEAR  THE CORRECT PROTECTIVE GLOVES,
GOGGLES AND FILTER MASKS WHEN YOU USE
CLEANING AGENTS, ADHESIVES, SEALANTS AND
PAINTS: THESE MATERIALS ARE DANGEROUS.
Prepare and dry the restoration area (Refer to SRM 51-77-11 Para
((z) W+
Wet Lay Up Resin 20-022  As required
(Refer to SRM 51-77-11 Para 4.A.(3)).
The data sheets for each adhesive, resin or low density
compound states the maximum quantity that can be
safely mixed at one time without causing an exotherm
reaction. Always refer to the appropriate data sheet
before mixing the chosen material.
e Warm up the mixed resin to a maximum temperature of 45°C (113 F).
1 Put the resin in a syringe volume 10 ml with a needle DIA 1.0 mm (0.04
in.) and inject the resin through the hole into the cells of the honeycomb
core. Start the injection at the cell bottom and finish when the resin is
leaking out of the inspection hole.
g. Close the filled holes with a self adhesive tape.
6 DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 28
Printed in FRANCE @ AIRBUS S.A.S. 2007. All rights reserved.

### Page 33 (OCR)

GA340
SERVICE BULLETIN
Let the resin cure for a minimum of 12 hours at room temperature. If
the room temperature is below 18°C (64F), extend the curing time in
accordance with the resin manufacturer recommendations and perform a
gelation test outside the restoration area. After resin gelation plus 4h,
continue with the subsequent steps:
<1> Remove the self adhesive tape from the restoration areas.
<2> Inspect the restoration (Refer to SRM 51-77-11 Para 5.).
<3> Remove any surplus resin from the border area of the restoration.
Use abrasive cloth. Start with 280 grade and finish with 400 grade.
<4> Clean the restoration areas with
Solvent General  11-026  As required
Purpose
(Refer to SRM 51-77-11 Para 4.E).
<5> Restore the surface protection (Refer to SRM 51-75-12).
(g) If there are areas on the trailing edge, shown as 'area 2' on the Fig. A-GAAAA
Sheet 07, to be inspected, do a special detailed inspection (ELCH) in accordance
with the Flow Chart Fig. A-GAAAA Sheet 03:
Do the ELCH inspection within 21 months after the issue of this Service
Bulletin (refer to NTM Task 51-10-26-220-801).
For the ELCH inspection behind the fasteners, use one grid line with a
distance of 50 mm (1.97 in.) between the inspection points, as shown on
Fig. A-GAAAA Sheet 08, View D and View E, area 2.
<1> The assessment criteria for the ELCH inspection behind the
tasteners are:
Yellow value 0.30 mm (0.012 in.)
Red value 0.40 mm (0.016 in.)
For the  adjustment of the ELCH, refer to NTM Task
51-10-26-220-801.
If the ELCH inspection extends ahead of the fasteners, use an inspection
grid of 50 mm X 50 mm (1.97 in.) between the inspection points, as
shown on Fig. A-GAAAA Sheet 08, View D and View E, area 1.
<1> The assessment criteria for the ELCH inspection ahead of the
tasteners are:
Yellow value 0.25 mm (0.010 in.)
Red value 0.35 mm (0.014 in.)
DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 29
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 34 (OCR)

GA340
SERVICE BULLETIN
For the  adjustment of the ELCH, refer to NTM Task
51-10-26-220-801.
2  In case of damage indications, Re- examine the findings as per tap
test inspection (Refer to NTM Task 51-10-03-280-801 or NTM Task
51-10-19-280-801), and contact AIRBUS for further instructions before next
flight.
In case of no damage indications, report to AIRBUS within 10 days and do 2
additional ELCH inspections at intervals not exceeding 4500 FC and not less
than 4000 FC.
a  In case of damage indications during the additional ELCH inspection, Re-
examine the findings as per tap test inspection (Refer to NTM Task
51-10-03-280-801 or NTM Task 51-10-19-280-801), and contact AIRBUS
for further instructions before next flight.
In case of no damage indications during the additional ELCH inspection,
report to AIRBUS within 10 days.
(h) Fill in the reporting sheet, refer to Fig. A-GAAAA Sheet 05.
In case of damage indications, send the inspection report with a referenced mail to:
AIRTAC
Customer Services
AIRBUS Central Entity
1 ROND POINT MAURICE BELLONTE
31707 BLAGNAC CEDEX
FRANCE
Phone: +33(0)5 61 93 3400 (24 hour)
Fax: +33(0)5 61 93 3500
Mailto: airtac@airbus.com
and in case of damage indications or no damage indications to
Structure Engineering Support
Customer Services - SEES1
AIRBUS Central Entity
1 ROND POINT MAURICE BELLONTE
31707 BLAGNAC CEDEX
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 30
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 35 (OCR)

GA340
SERVICE BULLETIN
FRANGE
Fax: +33(0)5 61 93 36 14
(2) Subtask 554038-832-202-002 - Do the rudder special detailed inspection on aircraft
with rudders which have exceeded or will exceed 13000 FC within 21 months after
the issue of this Service Bulletin
Manpower Resources
Manhours
Minimum number of person
Subtask elapsed time
Skills  NON DESTRUCTIVE
TESTING
Material necessary to do the job
Consumable CMLD01
ITEM DESCRIPTION  REFERENCE TO QTY PER A/C  SEE
CML MAT. No.  NOTES
Self-Adhes. Disks  05-052  As required
Self Adhesive Aluminium  08-052  As required
Tape
Solvent General Purpose  11-026  As required
Wet Lay Up Resin  20-022  As required
References
Non Destructive Test Manual (NTM)  Task 51-10-03-280-801
Task 51-10-19-280-801
Task 51-10-24-270-801
Task 51-10-25-290-801
Task 51-10-25-290-802
Task 51-10-26-220-801
Task 51-10-28-220-801
Structural Repair Manual (SRM)  51-75-12
51-77-10
51-77-11 Para 4.M. (2)
51-77-11 Para 4.A. (3)
51-77-11 Para 5.
51-77-11 Para 4.E
6 DATE: Apr 22/10  SERVICE BULLETIN No.: А340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 31
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 36 (OCR)

GA340
SERVICE BULLETIN
References
Fig. A-GAAAA  Sheet 01 - Flow Chart 1, vacuum loss
Rudder inspection  inspection area 1
Sheet 02 - Vacuum loss inspection -
damage assessment
Sheet 03 - Flow Chart 2, ELCH inspection
area 2
Sheet 05 - Reporting sheet
Sheet 06 - Rudder SN identification
Sheet 07 - Inspection areas
Sheet 08 - Typical ELCH procedure
Sheet 09 - Rudder skin thickness LH
Sheet 10 - Rudder skin thickness RH
Sheet 11 - Rudder skin thickness LH
Sheet 12 - Rudder skin thickness RH
Sheet 13 - Rudder skin thickness LA
Sheet 14 - Rudder skin thickness RH
Sheet 15 - Rudder skin thickness LH
Sheet 16 - Rudder skin thickness RH
Sheet 17 - Rudder skin thickness LH
Sheet 18 - Rudder skin thickness RH
Fig. A-GACAA  Sheet 01
Rudder SN - MSN reference List  Sheet 02
Sheet 03
(a) Identify the Serial Number (SN) of the rudder as shown on Fig. A-GAAAA Sheet
06.
(b) If you do not find a SN placard on the rudder, contact AIRBUS for further
instructions.
Compare the rudder SN with the rudder SNs in the rudder SN - MSN reference list
Fig. A-GACAA Sheet 01 thruFig. A-GACAA Sheet 03.
If you find a different SN against the MSN as detailed in the rudder SN - MSN
reference list, contact AIRBUS for further instructions.
2 If the rudder SN is not part of the rudder SN - MSN reference list, refer to the
Close-up para 3.E. No further action is necessary.
If the rudder is part of the rudder SN - MSN reference list with the same
indicated MSN, continue with the below instructions.
The Technical Disposition (TD) details the location of the reworked area to be
inspected and includes information about the vacuum loss inspection holes, if
necessary.
For the definition of the areas to be inspected, refer to the reference list Fig.
A-GACAA Sheet 01 thru Fig. A-GACAA Sheet 03 to find the MSN related
Technical Disposition (TD) No.
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 32
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 37 (OCR)

GA340
SERVICE BULLETIN
To get the TD, refer to the SB BOOKLET-link on the index page of this
Service Bulletin on the Air@Nav Engineering page in AIRBUS WORLD and
use 'SB BOOKLET-TD-K45-S3-XXXXX'.
For additional information, refer to SBIT SEMB 914.0808/09
Inspection method for reworked areas:
For reworked area astride AREA 1 and AREA 2, if TD provides vacuum
loss hole location then rework must be treated as if in AREA 1 only.
For reworked area astride AREA 1 and AREA 2, if TD does not provide
vacuum loss hole location then rework must be treated as if in AREA 2
only.
(e) If there are only areas on the trailing edge shown as 'area 2' on the Fig. A-GAAAA
Sheet 07, to be inspected, refer to Para (g).
If there is the non-ventilated area, shown as 'area 1' on the Fig. A-GAAAA Sheet
0Z, to be inspected, do the subsequent inspection in accordance with the Flow
Chart Fig. A-GAAAA Sheet 01 and Fig. A-GAAAA Sheet 02:
Do the vacuum loss inspection within 1800 FH after the issue of this Service
Bulletin (Refer to NTM Task 51-10-28-220-801).
a  Temporarily install adhesive foil on the areas to be inspected.
Mark the grid of holes on the adhesive foil.
CAUTION:  DRILL  PENETRATION  INTO  THE  SANDWICH
STRUCTURE HAS TO BE LIMITED TO 20 mm (0.8 in.)
TO PREVENT INNER SKIN DAMAGE.
Drill the inspection holes with DIA 1.5 mm (0.06 in.) through the outer
skin only.
Do the Vacuum loss inspection (Refer to NTM Task 51-10-28-220-801).
e  In case of damage indications, contact AIRBUS on the basis of a detailed
referenced damage report for further instructions before next flight.
In case of no damage indications, close the inspection holes as detailed
in the subsequent instructions and report the result to AIRBUS within 10
days.
Temporary restoration of the inspection holes option 1:
Close the holes with
Self Adhesive  08-052  As required
Aluminium Tape
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 33
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 38 (OCR)

GA340
SERVICE BULLETIN
or
Self-Adhes. Disks 05-052  As required
Do a detailed inspection of the restored area at intervals not exceeding
900 FH. Inspect the restored area for loose or lost adhesive disks or
tape.
In case of loose or lost tape or disks, close the holes again with
Self Adhesive  08-052  As required
Aluminium Tape
or
Self-Adhes. Disks 05-052  As required
This temporary  restoration  must be replaced by the permanent
restoration within 21 months after the vacuum loss inspection. For the
permanent restoration, refer to Para (f)4.
WARNING:  OBEY THE MANUFACTURER'S INSTRUCTIONS WHEN
YOU USE CLEANING AGENTS, ADHESIVES, SEALANTS
AND PAINTS: THESE MATERIALS ARE DANGEROUS.
WARNING:  WEAR THE CORRECT PROTECTIVE GLOVES, GOGGLES
AND FILTER MASKS WHEN YOU USE CLEANING AGENTS,
ADHESIVES, SEALANTS AND PAINTS: THESE MATERIALS
ARE DANGEROUS.
Temporary restoration of the inspection holes option 2:
a Before the resin injection:
<1> Identify the skin thickness of the areas to be inspected, refer to the
subsequent table:
Rudder SN  Refer to Figure
TS-1014, TS-1042  Fig. A-GAAAA Sheet 09 and Fig. A-GAAAA Sheet
10
TS-2004, TS-2005  Fig. A-GAAAA Sheet 11 and Fig. A-GAAAA Sheet
TS-2008 thru TS2010  12
TS-2022, TS-2023
TS-2028 thru TS-2030
TS-2032 thru TS-2034
TS-2041
TS-2044 thru TS-2046
TS-2048 thru TS-2050
TS-2057
TS-2067, TS-2068
TS-2071
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 34
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 39 (OCR)

©A340
SERVICE BULLETIN
TS-3001  Fig. A-GAAAA Sheet 13 and Fig. A-GAAAA Sheet
TS-3010  14
TS-3012 thru TS-3014
TS-3017 thru TS-3032
Ts-3034 thru TS-3042
TS-3046, TS-3047, TS-3049, TS-3054, TS-3055
TS-3058,. TS-3060, TS-3062, TS-3063, TS-3065
TS-3067 thru TS-3070
TS-3077, TS-3078, TS-3080, TS-3081
TS-3086, TS-3089
TS-3092, TS-3093, TS-3095, TS-3096
TS-3098, TS-3099
TS-3101 thru TS-3105
TS-3108 thru TS-3112
TS-3114, TS-3116, TS-3117
TS-3120, TS-3128, TS-3131, TS-3132
TS-3212, TS-3323, TS-3330
TS-4009 thru TS-4018  Fig. A-GAAAA Sheet 15 and Fig. A-GAAAA Sheet
TS-4020  TS-4022, TS-4023  16
TS-4025 thru TS-4027
TS-4029 thru TS-4031
TS-4038, TS-4047, TS-4049, TS-4066
TS-4083  Fig. A-GAAAA Sheet 17 and Fig. A-GAAAA Sheet
18
<2> If the skin thickness of the affected areas, defined by the
TD, does not exceed 1.5 mm (0.06 in.), do a thermography
inspection as detailed in NTM Task 51-10-25-290-801 or NTM Task
51-10-25-290-802,
AND/OR
If the skin of the affected areas, defined by the TD, is thicker than
1.5 mm (0.06 in.), do an ultrasound inspection as detailed in NTM
Task 51-10-24-270-801.
NOTE:  During the ultrasound inspection, the vacuum
inspection holes must be closed with thin adhesive
tape (Material No 08-052 - basic) to prevent couplant
ingress into the holes.
In case of damage indications contact AIRBUS for further instructions
before next flight.
Prepare and dry the restoration area (Refer to SRM 51-77-11 Para
4.M. (2)).
• Prepare
Wet Lay Up Resin 20-022  As required
(Refer to SRM 51-77-11 Para 4.A. (3)).
DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 35
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 40 (OCR)

GA340
SERVICE BULLETIN
NOTE:  The data sheets for each adhesive, resin or low density
compound states the maximum quantity that can be
safely mixed at one time without causing an exotherm
reaction. Always refer to the appropriate data sheet
before mixing the chosen material.
Warm up the mixed resin to a maximum temperature of 45°C (113 F).
Put the resin in a syringe volume 10 ml with a needle DIA 1.0 mm (0.04
in.) and inject the resin through the hole into the cells of the honeycomb
core. Start the injection at the cell bottom and finish when the resin is
leaking out of the inspection hole.
g Close the filled holes with
Self Adhesive  08-052  As required
Aluminium Tape
or
Self-Adhes. Disks  05-052  As required
n  Let the resin cure for a minimum of 6 hours at room temperature. If
the room temperature is below 18°C (64F), extend the curing time in
accordance with the resin manufacturer recommendations and perform a
gelation test outside the restoration area. After resin gelation plus 2h, the
aircraft can be released to operations again.
Within 21 months after the vacuum loss inspection, do the final surface
restoration:
<1> Remove the self adhesive tape from the restoration areas.
<2> Inspect the restoration (Refer to SRM 51-77-11 Para 5.).
<3> Remove any surplus resin from the border area of the restoration.
Use abrasive cloth. Start with 280 grade and finish with 400 grade.
<4> Clean the restoration areas with
Solvent General  11-026  As required
Purpose
(Refer to SRM 51-77-11 Para 4.E).
<5> Restore the surface protection (Refer to SRM 51-75-12).
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 36
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 41 (OCR)

GA340
SERVICE BULLETIN
4 Permanent restoration of the inspection holes:
a Before the resin injection:
<1> Identify the skin thickness of the areas to be inspected, refer to the
subsequent table:
Rudder SN  Refer to Figure
TS-1014, TS-1042  Fig. A-GAAAA Sheet 09 and Fig. A-GAAAA Sheet
TS-2004, TS-2005  Fig. A-GAAAA Sheet 11 and Fig. A-GAAAA Sheet
TS-2008 thru TS2010  12
TS-2022, TS-2023
TS-2028 thru TS-2030
TS-2032 thru TS-2034
TS-2041
TS-2044 thru TS-2046
TS-2048 thru TS-2050
TS-2057
TS-2067, TS-2068
TS-2071
TS-3001  Fig. A-GAAAA Sheet 13 and Fig. A-GAAAA Sheet
TS-3010
TS-3012 thru TS-3014
TS-3017 thru TS-3032
Ts-3034 thru TS-3042
TS-3046, TS-3047, TS-3049, TS-3054, TS-3055
TS-3058,.TS-3060, TS-3062, TS-3063, TS-3065
TS-3067 thru TS-3070
TS-3077, TS-3078, TS-3080, TS-3081
TS-3086, TS-3089
TS-3092, TS-3093, TS-3095, TS-3096
TS-3098, TS-3099
TS-3101 thru TS-3105
TS-3108 thru TS-3112
TS-3114, TS-3116, TS-3117
TS-3120, TS-3128, TS-3131, TS-3132
TS-3212, TS-3323, TS-3330
TS-4009 thru TS-4018  Fig. A-GAAAA Sheet 15 and Fig. A-GAAAA Sheet
TS-4020, TS-4022, TS-4023  16
TS-4025 thru TS-4027
TS-4029 thru TS-4031
TS-4038, TS-4047, TS-4049, TS-4066
TS-4083  Fig. A-GAAAA Sheet 17 and Fig. A-GAAAA Sheet
18
<2> If the skin thickness  of the affected areas, defined by the
TD, does not exceed 1.5 mm (0.06 in.), do a thermography
inspection as detailed in NTM Task 51-10-25-290-801 or NTM Task
51-10-25-290-802,
AND/OR
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 37
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 42 (OCR)

9A340
SERVICE BULLETIN
If the skin of the affected areas, defined by the TD, is thicker than
1.5 mm (0.06 in.), do an ultrasound inspection as detailed in NTM
Task 51-10-24-270-801.
NOTE:  During the ultrasound  inspection, the vacuum
inspection holes must be closed with thin adhesive
tape (Material No 08-052 - basic) to prevent couplant
ingress into the holes.
In case of damage indications contact AIRBUS for further instructions
before next flight.
WARNING:  OBEY THE MANUFACTURER'S INSTRUCTIONS
WHEN YOU USE CLEANING AGENTS, ADHESIVES;
SEALANTS AND PAINTS: THESE MATERIALS ARE
DANGEROUS.
WARNING:  WEAR  THE CORRECT PROTECTIVE GLOVES,
GOGGLES AND FILTER MASKS WHEN YOU USE
CLEANING AGENTS, ADHESIVES, SEALANTS AND
PAINTS: THESE MATERIALS ARE DANGEROUS.
Prepare and dry the restoration area (Refer to SRM 51-77-11 Para
4.M.(2)).
d Prepare
Wet Lay Up Resin 20-022  As required
(Refer to SRM 51-77-11 Para 4.A. (3)).
NOTE:  The data sheets for each adhesive, resin or low density
compound states the maximum quantity that can be
safely mixed at one time without causing an exotherm
reaction. Always refer to the appropriate data sheet
before mixing the chosen material.
e Warm up the mixed resin to a maximum temperature of 45°C (113 F).
1 Put the resin in a syringe volume 10 ml with a needle DIA 1.0 mm (0.04
in.) and inject the resin through the hole into the cells of the honeycomb
core. Start the injection at the cell bottom and finish when the resin is
leaking out of the inspection hole.
g Close the filled holes with a self adhesive tape.
6 DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 38
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 43 (OCR)

GA340
SERVICE BULLETIN
Let the resin cure for a minimum of 12 hours at room temperature. If
the room temperature is below 18°C (64F), extend the curing time in
accordance with the resin manufacturer recommendations and perform a
gelation test outside the restoration area. After resin gelation plus 4h,
continue with the subsequent steps:
<1> Remove the self adhesive tape from the restoration areas.
<2> Inspect the restoration (Refer to SRM 51-77-11 Para 5.).
<3> Remove any surplus resin from the border area of the restoration.
Use abrasive cloth. Start with 280 grade and finish with 400 grade.
<4> Clean the restoration areas with
Solvent General  11-026  As required
Purpose
(Refer to SRM 51-77-11 Para 4.E).
<5> Restore the surface protection (Refer to SRM 51-75-12).
(9)  If there are areas on the trailing edge, shown as 'area 2' on the Fig. A-GAAAA
Sheet 07, to be inspected, do a special detailed inspection (ELCH) in accordance
with the Flow Chart Fig. A-GAAAA Sheet 03:
Do the ELCH inspection within 21 months after the issue of this Service
Bulletin (refer to NTM Task 51-10-26-220-801).
For the ELCH inspection behind the fasteners, use one grid line with a
distance of 50 mm (1.97 in.) between the inspection points, as shown on
Fig. A-GAAAA Sheet 08, View D and View E, area 2.
The assessment criteria for the ELCH inspection behind the fasteners
are:
Yellow value 0.30 mm (0.012 in.)
Red value 0.40 mm (0.016 in.)
For the adjustment of the ELCH, refer to NTM Task 51-10-26-220-801.
If the ELCH inspection extends ahead of the fasteners, use an inspection
grid of 50 mm X 50 mm (1.97 in.) between the inspection points, as
shown on Fig. A-GAAAA Sheet 08, View D and View E, area 1.
<1> The assessment criteria for the ELCH inspection ahead of the
fasteners are:
Yellow value 0.25 mm (0.010 in.)
Red value 0.35 mm (0.014 in.)
DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 39
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved

### Page 44 (OCR)

©A340
SERVICE BULLETIN
For the  adjustment of the ELCH, refer to NTM Task
51-10-26-220-801.
In case of damage indications, Re- examine the findings as per tap
test inspection (Refer to NTM Task 51-10-03-280-801 or NTM Task
51-10-19-280-801), and contact AIRBUS for further instructions before next
flight.
In case of no damage indications, report to AIRBUS within 10 days and do 2
additional ELCH inspections at intervals not exceeding 4500 FC and not less
than 4000 FC.
In case of damage indications during the additional ELCH inspection, Re-
examine the findings as per tap test inspection (Refer to NTM Task
51-10-03-280-801 or NTM Task 51-10-19-280-801), and contact AIRBUS
for further instructions before next flight.
In case of no damage indications during the additional ELCH inspections,
report to AIRBUS within 10 days.
(n) Fill in the reporting sheet, refer to Fig. A-GAAAA Sheet 05.
In case of damage indications, send the inspection report with a referenced mail to:
AIRTAC
Customer Services
AIRBUS Central Entity
1 ROND POINT MAURICE BELLONTE
31707 BLAGNAC CEDEX
FRANCE
Phone: +33(0)5 61 93 3400 (24 hour)
Fax: +33(0)5 61 93 3500
Mailto: airtac@airbus.com
and in case of damage indications or no damage indications to
Structure Engineering Support
Customer Services - SEES1
AIRBUS Central Entity
1 ROND POINT MAURICE BELLONTE
31707 BLAGNAC CEDEX
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 40
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 45 (OCR)

© A340
SERVICE BULLETIN
FRANCE
Fax: +33(0)5 61 93 36 14
**CONF 002
(1) Subtask 554038-832-203-002 - Do 2 additional repetitive special detailed
inspections (ELCH)
Manpower Resources
Manhours
Minimum number of person
Subtask elapsed time
Skills  NON DESTRUCTIVE
TESTING
References
Non Destructive Test Manual (NTM)  Task 51-10-03-280-801
Task 51-10-19-280-801
Task 51-10-26-220-801
Fig. A-GACAA  Sheet 01
Rudder SN - MSN reference List  Sheet 02
Sheet 03
Fig. A-GAEAA  Sheet 01 - Inspection areas
ELCH inspection  Sheet 02 - Flow Chart
Sheet 03 - Typical ELCH procedure
Sheet 04 - Reporting sheet
Sheet 05 - Rudder SN identification
(a)  Identify the Serial Number (SN) of the rudder as shown on Fig. A-GAEAA Sheet
05.
(b) If you do not find a SN placard on the rudder, contact AIRBUS for further
instructions.
(C)  Compare the rudder SN with the rudder SNs in the rudder SN - MSN reference list
Fig. A-GACAA Sheet 01 thruFig. A-GACAA Sheet 03.
1  If you find a different SN against the MSN as detailed in the rudder SN - MSN
reference list, contact AIRBUS for further instructions.
If the rudder SN is not part of the rudder SN - MSN reference list, refer to the
Close-up para 3.E. No further action is necessary.
If the rudder is part of the rudder SN - MSN reference list with the same
indicated MSN, continue with the below instructions.
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 41
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 46 (OCR)

GA340
SERVICE BULLETIN
(a)  For the areas on the trailing edge, shown as 'area 2' on the Fig. A-GAEAA Sheet
01, which have been inspected during the sampling, 2 additional special detailed
inspections (ELCH) in accordance with the Flow Chart Fig. A-GAEAA Sheet 02 are
necessary:
1  The Technical Disposition (TD) details the location of the reworked area to be
inspected.
a  For the definition of the areas to be inspected, refer to the reference list
Fig. A-GACAA Sheet 01 thru Fig. A-GACAA Sheet 03 to find the MSN
related Technical Disposition (TD) No.
b  To get the TD, refer to the SB BOOKLET-link on the index page of this
Service Bulletin on the Air@Nav Engineering page in AIRBUS WORLD
and use 'SB BOOKLET-TD-K45-S3-XXXXX'.
For additional information, refer to SBIT SEMB 914.0808/09
2  Do the ELCH inspection at intervals not exceeding 4500 FC and not less than
4000 FC (refer to NTM Task 51-10-26-220-801).
a  For the ELCH inspection behind the fasteners, use one grid line with a
distance of 50 mm (1.97 in.) between the inspection points, as shown on
Fig. A-GAEAA Sheet 03, View A, area 2.
The assessment criteria for the ELCH inspection behind the fasteners
are:
Yellow value 0.30 mm (0.012 in.)
Red value 0.40 mm (0.016 in.)
For the adjustment of the ELCH, refer to NTM Task 51-10-26-220-801.
If the ELCH inspection extends ahead of the fasteners, use an inspection
grid of 50 mm X 50 mm (1.97 in.) between the inspection points, as
shown on Fig. A-GAEAA Sheet 03, View A, area 1.
<1> The assessment criteria for the ELCH inspection ahead of the
fasteners are:
Yellow value 0.25 mm (0.010 in.)
Red value 0.35 mm (0.014 in.)
For the  adjustment of the ELCH, refer to NTM Task
51-10-26-220-801.
In case of damage indications, Re- examine the findings as per tap
test inspection (Refer to NTM Task 51-10-03-280-801 or NTM Task
51-10-19-280-801), and contact AIRBUS for further instructions before next
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 42
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 47 (OCR)

©A340
SERVICE BULLETIN
4  In case of no damage indications during the additional ELCH inspections,
report to AIRBUS within 10 days.
(e) Fill in the reporting sheet, refer to Fig. A-GAEAA Sheet 04.
In case of damage indications, send the inspection report with a referenced mail to:
AIRTAC
Customer Services
AIRBUS Central Entity
1 ROND POINT MAURICE BELLONTE
31707 BLAGNAC CEDEX
FRANCE
Phone: +33(0)5 61 93 3400 (24 hour)
Fax: +33(0)5 61 93 3500
Mailto: airtac@airbus.com
and in case of damage indications or no damage indications to
Structure Engineering Support
Customer Services - SEES1
AIRBUS Central Entity
1 ROND POINT MAURICE BELLONTE
31707 BLAGNAC CEDEX
FRANCE
Fax: +33(0)5 61 93 36 14
**CONF ALL
D. TEST
**CONF 001
None
**CONF 002
None
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 43
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 48 (OCR)

GA340
SERVICE BULLETIN
**CONF ALL
E. CLOSE-UP
**CONF 001
(1) Subtask 554038-942-201-001 - Close-up
Manpower Resources
Skills  NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)  Task 29-10-00-863-001
Task 29-10-00-863-002
Task 29-10-00-863-003
55-33-13, Page Block 201
Task 55-40-00-210-001
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) To close the access panels, (Refer to AMM 55-33-13, Page Block 201).
(c) Remove the access platforms.
(d) Close the circuit breakers as given in the rudder inspection/check Close-up
procedure (Refer to AMM Task 55-40-00-210-001).
(e) Pressurize the Green Hydraulic System (Refer to AMM Task 29-10-00-863-001)
(f) Pressurize the Yellow Hydraulic System (Refer to AMM Task 29-10-00-863-002)
(g) Pressurize the Blue Hydraulic System (Refer to AMM Task 29-10-00-863-003)
(h) In the cockpit, remove all warning notices.
**CONF 002
(1) Subtask 554038-942-201-001 - Close-up
Manpower Resources
Skills  NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)  Task 29-10-00-863-001
Task 29-10-00-863-002
Task 29-10-00-863-003
55-33-13, Page Block 201
Task 55-40-00-210-001
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 44
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 49 (OCR)

©A340
SERVICE BULLETIN
(b) To close the access panels, (Refer to AMM 55-33-13, Page Block 201).
(c) Remove the access platforms
(d) Close the circuit breakers as given in the rudder inspection/check Close-up
procedure (Refer to AMM Task 55-40-00-210-001).
(e) Pressurize the Green Hydraulic System (Refer to AMM Task 29-10-00-863-001)
(f) Pressurize the Yellow Hydraulic System (Refer to AMM Task 29-10-00-863-002)
(g) Pressurize the Blue Hydraulic System (Refer to AMM Task 29-10-00-863-003)
(h) In the cockpit, remove all warning notices.
6 DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 45
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 50 (OCR)

F_SB_554038_6_AAAA_01_05
IDENTIFY THE RUDDER SERIAL NUMBER VIA THE PLACARD ON THE RUDDER SPAR.  NO FURTHER ACTION  REQUIRED IN  ACCORDANCE WITH  THIS INSPECTION SB  REPORT TO AIRBUS  WITHIN 10 DAYS  PERMANENT RESTORATION  THERMOGRAPHY INSPECTION  AS PER NTM 51-10-25  OR  ULTRASOUND INSPECTION  AS PER NTM 51-10-24  REQUIRED BEFORE RESIN INJECTION.  CONTACT AIRBUS  BEFORE FURTHER FLIGHT  IN CASE OF FINDINGS.  NO FURTHER ACTION  REQUIRED  IN AREA 1
IN CASE OF NO EXISTING PLACARD CONTACT AIRBUS  COMPARE YOUR RUDDER SERIAL NUMBER WITH THE  RUDDER SERIAL NUMBERS IN THE REFERENCE LIST  NO
SERIAL NUMBER  FOUND IN REFERENCE  CLOSE INSPECTION HOLES  TEMPORARY OPTION I!  THERMOGRAPHY INSPECTION  AS PER NTM 51-10-25  OR  ULTRASOUND INSPECTION  AS PER NTM 51-10-24  REQUIRED BEFORE RESIN INJECTION.  CONTACT AIRBUS  BEFORE FURTHER FLIGHT  IN CASE OF FINDINGS.  WITHIN 21 MONTHS AFTER  THE VACUUM LOSS INSPECTION,  RESTORE FINAL  PROTECTION  SERVICE BULLETIN No : A340-55-4038
Page: 46
GA340  SERVICE BULLETIN  DO THE SPECIAL DETAILED INSPECTION (VACUUM LOSS)  AS PER NTM 51-10-28  IN AREAS DEFINED IN SPECIFIC TECHNICAL DISPOSITION  FOR EACH RUDDER  INDICATION  FOUND  TEMPORARY OPTION I  FREQUENT DETAILED  INSPECTION OF RESTORED  AREA, AT INTERVALS  NOT EXCEEDING  900 FH  WITHIN 21 MONTHS AFTER  THE VACUUM LOSS INSPECTION  PERFORM PERMANENT RESTORATION  THERMOGRAPHY INSPECTION  AS PER NTM 51-10-25  ULTRASOUND INSPECTION  AS PER NTM 51-10-24  REQUIRED BEFORE RESIN INJECTION.  CONTACT AIRBUS  BEFORE FURTHER FLIGHT  IN CASE OF FINDINGS.  FOR THE ACCOMPLISHMENT TIMESCALE. REFER TO PARA 1.E.(2)  Fiaure A-GAAAA - Sheet 01  Rudder inspection - Flow Chart 1. vacuum loss inspection area 1  Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.
-YES
REPORT TO AIRBUS  TO GET FURTHER  INSTRUCTIONS  BEFORE NEXT FLIGHT  AIRBUS INSTRUCTIONS  TO BE CARRIED OUT  BEFORE NEXT FLIGHT  6 DATE: Apr 22/10  REVISION No.: 00 - Apr 22/10
**CONF 001  NOTE:

### Page 51 (OCR)

©A340
SERVICE BULLETIN
**CONF 001
DAMAGE ASSESSMENT BY VACUUM LOSS INSPECTION:
IF THE VACUUM LOSS INSPECTION REVEALS DAMAGE AN ADD-ON INSPECTION IN MIDFIELD
DIRECTION ONLY MUST BE PERFORMED TO DEFINE THE OVERALL DAMAGE SIZE.
• FOR ADD-ON INSPECTION 1, DRILL ONE ADDITIONAL ROW OF INSPECTION HOLES WITH A PITCH
OF 25.0mm (0.98in.) AND ONE EXTRA HOLE AT EACH END OF THE ROW PARALLEL TO THE DETECTED
LEAKAGE, AS PER SKETCH BELOW. DRILL INSPECTION HOLES WITH DIAMETER 1.5mm (0.06in)
WARNING: DRILL PENETRATION INTO THE SANDWICH STRUCTURE HAS TO BE LIMITED TO
20.0mm (0.79in.), TO PREVENT INNER SKIN DAMAGE
WARNING: DRILLING IN THE RESTRICTED AREA CAN DAMAGE THE INNER SKIN AND IS NOT ALLOWED.
PERFORM VACUUM LOSS INSPECTION (SAME PROCEDURE AS APPLIED FOR BASIC INSPECTION),
POSITION THE VACUUM CUP IN A WAY THAT ONLY ONE OF THE NEW HOLES IS COVERED BY
THE CUP, DURING EACH MEASUREMENT.
• IF NO EXTRA LEAKAGE IS FOUND, DOCUMENT THE DAMAGE, USING THE REPORTING SHEET.
• IF MORE LEAKAGES ARE FOUND, PROCEED WITH ADD-ON INSPECTION 2 (AND IF REQUIRED
FURTHER STEPS UNTIL THE WHOLE DAMAGE EXTEND IS DETECTED), USING THE SAME
PROCEDURE AS DETAILED ABOVE.
NOTE: THE OVERALL DAMAGE LENGTH AND WIDTH IS BOUNDED BY THOSE ROWS OF
INSPECTION HOLES, WHICH DO NOT INDICATE A VACUUM LOSS
RESULTS OF VACUUM LOSS INSPECTION  O NO LEAKAGE
• LEAKAGE DETECTED
RESTRICTED AREA  25.0mm  OVERALL LENGTH
(0.98in.)
BASIC INSPECTION RESULTS
ADD-ON INSPECTION  OVERALL  ADD-ON INSPECTION 1
DIRECTION OF  WIDTH
ADD-ON INSPECTION 2
ADD-ON INSPECTION 3
OVERALL DAMAGE SIZE
DEBONDING AREA
HOLES TO BE INSPECTED IN CASE OF FINDINGS.
F_SB_554038_6_AAAA_02_02
Figure A-GAAAA - Sheet 02
Rudder inspection - Vacuum loss inspection - damage assessment
DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 47
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 52 (OCR)

GA340
SERVICE BULLETIN
**CONF 001
IDENTIFY THE RUDDER SERIAL NUMBER VIA THE PLACARD
ON THE RUDDER SPAR
IN CASE OF NO EXISTING PLACARD CONTACT AIRBUS
NO FURTHER ACTION
SERIAL NUMBER  REQUIRED IN
FOUND IN REFERENCE  ACCORDANCE WITH
LIST  THIS INSPECTION SB
YES
DO THE REPETITIVE SPECIAL DETAILED
INSPECTION (ELCH) AS PER NTM 51-10-26
IN AREAS DEFINED IN SPECIFIC TECHNICAL DISPOSITION
FOR EACH RUDDER
INDICATION  VO
FOUND
IND
DO 2 ADDITIONAL ELCH INSPECTIONS  REPORT TO AIRBUS
AT INTERVALS NOT EXCEEDING  WITHIN 10 DAYS
4500FC AND NOT LESS THAN 4000 FC
RE-EXAMINE THE FINDINGS
AS PER TAP INSPECTION  YES  INDICATION
NTM 51-10-03 OR NTM 51-10-19  FOUND
REPORT TO AIRBUS  REPORT TO AIRBUS
TO GET FURTHER  WITHIN 10 DAYS
INSTRUCTIONS
BEFORE NEXT FLIGHT
AIRBUS INSTRUCTIONS  NO FURTHER ACTION
TO BE CARRIED OUT  REQUIRED
BEFORE NEXT FLIGHT  IN AREA 2
NOTE:
FOR THE ACCOMPLISHMENT TIMESCALE. REFER TO PARA 1.E. (2)  F_SB_554038_6_AAAA_03_04
Figure A-GAAAA - Sheet 03
Rudder inspection - Flow Chart 2, ELCH inspection area 2
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 48
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 53 (OCR)

©A340
SERVICE BULLETIN
**CONF 001
Inspection Report
Rudder Surface Inspection as per SB in area:
Aircraft type:  Inspection date:
MSN:  Operator:
Rudder S/N:  FC:
Rudder P/N:  FH:
Rudder Side
Inspection method  LH  RH
Inspection  Tap Test  No findings  Findings as detailed  by sketch* and photos
Inspection  Thermography  No findings  Findings as detailed  by sketch* and photos
ELCH Inspection  No findings  Findings as detailed  by sketch* and photos
UT Inspection  No findings  by sketch* and photos  Findings as detailed
Vacuum Loss  Inspection  No findings  Findings as detailed  by sketch* and photos
* use sketch from the TD
F_SB_554038_6_AAAA_05_02
Figure A-GAAAA - Sheet 05
Rudder inspection - Reporting sheet
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 49
Printed in FRANCE @ AIRBUS S.A.S. 2007. All rights reserved.

### Page 54 (OCR)

GA340
SERVICE BULLETIN
LOO NO**
Z326
326CL
326AL -
POSITION OF
RUDDER S/N PLACARD
SAIRBUS AC I
MER  B _ PN F5547XXXXXXXX
DESCR.
SER. N ° ITS-XXXX
CA CODE
MFG DATE
NOTE:
OPEN ACCESS PANEL AS PER AMM 55-33-13 P. BLOCK 201.
CLOSE ACCESS PANEL AS PER AMM 55-33-13 P. BLOCK 201.  F_SB_554038_6_AAAA_06_01
Figure A-GAAAA - Sheet 06
Rudder inspection - Rudder SN identification
DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 50
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 55 (OCR)

©A340
SERVICE BULLETIN
**CONF 001
BR7-
AREA 1  BR6-
NON VENTILATED
BR5-  AREA 2
TRAILING EDGE AREA
BR4-
BR3-
BR2-
50.0 mm
(1.97 in)
466.0 mm
(18.35 in)
BR1-  5
F_SB_554038_6_AAAA_07_00
Figure A-GAAAA - Sheet 07
Rudder inspection - Inspection areas
DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 51
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 56 (OCR)

GA340
SERVICE BULLETIN
**CONF 001
FASTENERS  BR7-
BR6-
AREA 1
BR5-  AREA 2
TYPICAL TRAILING EDGE  AREA 1  AREA 2
ELCH INSPECTION
50.0 mm
(1.97 in)
BR4
BR3
BR2
50.0 mm
(1.97 in) -
75.0 mm
(2.95 in)
75.0 mm
BR1-  (2.95 in)
NOTE:
MINIMUM DISTANCE FROM EDGE 75.0mm (2.95in.)
F_SB_554038_6_AAAA_08_01
Figure A-GAAAA - Sheet 08
Rudder inspection - Typical ELCH procedure
DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 52
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 57 (OCR)

©A340
SERVICE BULLETIN
**CONF 001
LH SIDE  124 mm  (4.88 in.)  (1.65 in.)
OF RUDDER  42 mm  65 :
13.82  39.0 m  38.50  (1.50
LIGHTNING
- 55 42 0.)  265.0 mm  (10.45 in.)  PROTECTION  PLATE
Tim.  342.0 mm  (13.46 i
13.78  BRE
LIGHTNING
PROTECTION
BRS  PLATE
106 mm
150.55  • in.j  BRA
BR3
BR2>
13, 8 mm
Ст.  140.43 in.  mam
BRI  1027.0  1104.0  (43.46 in.)
106 mm
LIGHTNING
PROTECTION
PLATE
T< 1.5mm (0.059in.)
VALID FOR RUDDER
NO INSPECTION
A554-71500  F_SB_554038_6_AAAA_09_02
Figure A-GAAAA - Sheet 09
Rudder inspection - Rudder skin thickness LH
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 53
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 58 (OCR)

GA340
SERVICE BULLETIN
**CONF 001
RH SIDE
OF RUDDER
BRI  53.82 іл.)
LIGHN ING
150 mm
BRE
(20.79 in.)  528.0 mm  BRS  (5.91 in.)
11. 28 inT  110.50 (n.)
1104.0 mm  1027,9 .)  (4. 84 11.)  BR 1  (5.43 in.]  1138 mm  (8.39 in.)  213 mr
107  (4.21 in.]
LIGHTNING
PROTECTION
PLATE
888 T< 1.5mm (0.059in.)
NO INSPECTION  VALID FOR RUDDER
A554-71500  F_SB_554038_6_AAAA_10_02
Figure A-GAAAA - Sheet 10
Rudder inspection - Rudder skin thickness RH
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 54
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 59 (OCR)

GA340
SERVICE BULLETIN
**CONF 001
80
LH SIDE  (3.15 in.)  mim
OF RUDDER
(6.38 in.)  162 mm
BR6  1252 mm  (49.29 in.)
BR5
BR4
BR2  504 mm
(5.63 in.)  143 mm
BRI
8828 T< 1.5mm (0.059in.)  (19.76 in.)  502 mm
T> 1.5mm (0.059in.)  VALID FOR RUDDER
NO INSPECTION  F554-70000
F_SB_554038_6_AAAA_11_00
Figure A-GAAAA - Sheet 11
Rudder inspection - Rudder skin thickness LH
6  DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 55
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 60 (OCR)

GA340
SERVICE BULLETIN
**CONF 001
$8.12 ]
BRT  RH SIDE
OF RUDDER
- BR6
BRO
(12.28 in.)  312 mm
mine in  BR3  112 20 5. T
BRZ
BRI
540 mm  (21.26 in.)
888 T< 1.5mm (0.059in.)
WA T> 1.5mm (0.059in.)  VALID FOR RUDDER
I NO INSPECTION  F554-70000
F_SB_554038_6_AAAA_12_00
Figure A-GAAAA - Sheet 12
Rudder inspection - Rudder skin thickness RH
6 DATE: Apr 22/10  SERVICE BULLETIN No.: A340-55-4038
REVISION No.: 00 - Apr 22/10  Page: 56
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

The text continues at https://openairdocs.org/service-documents/airbus/a340-55-4038/file/c1513313b35f.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
