# Airbus Service Bulletin A340-57-5047

Copy: No revision named ("A340-57-5047 R00"), 88 pages: PDF https://openairdocs.org/files/sha256/ce/a5/cea5cc813f56127651556130f17e8f76a26198b3b94067189a3202afd5db7d8b; text https://openairdocs.org/service-documents/airbus/a340-57-5047/file/cea5cc813f56.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2019-0320, the docket of AD 2019-17-05. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A340-57-5047
- Page: https://openairdocs.org/service-documents/airbus/a340-57-5047

## Text (88 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2019-0320, the docket of AD 2019-17-05. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

@A340-500/600
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
This summary is for information only and is not approved for modification of the aircraft.
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 57
TITLE: WINGS-LEADING EDGE AND LEADING EDGE DEVICES-INSPECTION
OF SLAT TRACKS NUMBER 10 REFERENCES
**CONF ALL
MODIFICATIONS
None
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
Some slat track references were implemented as spares in Illustrated Parts Catalog (IPC) in June 2010
when in fact those references for slat tracks No. 10 are not able to sustain ultimate load for some
weight variants.
IPC documents review and correction is still ongoing. AIRBUS is aiming to finalize the correction in
October 2018. Even investigation is demonstrating that impacted references were never delivered as
spare part, possible slat track swap between aircraft cannot be excluded due to wrong IPC data.
The aim of this inspection is to identify if affected part numbers have been installed.
In case of wrong part installed, the slat track will have to be replaced according to the accomplishment
timescale. If no affected part number is installed, no further action is requested.
Accomplishment of this Service Bulletin will contribute to make sure that the slat tracks installed can
sustain the ultimate loads corresponding to the weight variant of the aircraft.
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE
 MANDATORY (1)
 CANCELS INSPECTION SB
 NO
POTENTIAL AD
 YES
 A/C OPERATION AFFECTED
 NO
RELIABILITY AFFECTED
 NO
 PAX COMFORT AFFECTED
 NO
COST SAVING
 NO
 LROPS AFFECTED
 NO
STRUCTURAL LIFE EXTN
 NO
 VENDOR SB INVOLVED
 NO
NOTE
 (1)
: Service Bulletin must be accomplished.
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 2

@A340-500/600
SERVICE BULLETIN
SUMMARY
MATERIAL PRICE INFORMATION
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Component COMPB01
 2
 See SB
 Nuts, cotter pins, bearing
Component COMPB02
 2
 See SB
 Nuts, cotter pins
Component COMPB03
 2
 See SB
 Track assy-No 10
EFFECTIVITY
This Service Bulletin is applicable to this (these) operator(s) :
06U 32P 39N 41N 65W 72W 81Q 83V AHY AIB ARA DLH ETD
F2I G4I GBB HFY I2L IBE IRM LHT QAF QTR R1T SAA SOU
TAM THA THY VIR
CONCURRENT REQUIREMENTS
None
REFERENCES / REPERCUSSIONS
TFU
 57.40.00.022
OEB
 None
AOT
 None
SIL
 None
ISI
 00.00.00285
00.05.00003
11.00.00002
LINE MAINTENANCE AFFECTED
 No
LIFE LIMIT
 None
OTHER
 Operator Information Transmission (OIT) No. 999-0058/16
OTHER
 OIT No. 999-0066/17
NATURE OF THE WORK
AIRCRAFT
 YES
EQUIPMENT
 NO
MANPOWER
Task 575047-832-895-001: Special Detailed Inspection of the Slat Tracks No. 10 References
TOTAL MANHOURS
 6.50
ELAPSED TIME (HOURS)
 1.25
Task 575047-833-895-001: Replacement of the Slat Track(s) No. 10
TOTAL MANHOURS
 8.00
ELAPSED TIME (HOURS)
 4.00
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 3

@A340-500/600
SERVICE BULLETIN
SUMMARY
APPENDICES
Appendix 01 - Inspection Report
Appendix 02 - Manpower Gantt Chart
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 4

@A340-500/600
SERVICE BULLETIN
SUMMARY
**CONF ALL
SLAT 4
SLAT TRACK No 9
A
LH SHOWN
RH SYMMETRICAL
SLAT TRACK No 10
TO BE INSPECTED
Z622
Z522
A
A
F_SB_575047_7_SAAA_01_00
Figure A-USAAA - Sheet 01
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 5

@A340-500/600
SERVICE BULLETIN
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 57
TITLE: WINGS-LEADING EDGE AND LEADING EDGE DEVICES-INSPECTION
OF SLAT TRACKS NUMBER 10 REFERENCES
MODIFICATION No.: None
This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the
property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with
any information contained in it. It is delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall not be used for any purpose other than
that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall
not be duplicated in any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the conditions herein), without
AIRBUS prior written consent.
1. PLANNING INFORMATION
**CONF ALL
A. EFFECTIVITY
(1) Models
340-541 340-542 340-642
(2) Effectivity by MSN
0371 0376 0383 0391 0410 0416-0417 0426 0431 0440 0445 0449 0457 0460 0464
0468 0471 0478 0482 0485 0488 0492 0495 0499 0514 0517 0520 0523 0531 0534
0537 0540 0543 0547 0557 0560 0563 0566 0569 0572 0575 0577 0580 0583 0586
0601 0604 0606 0608 0611 0615 0617 0619 0622 0624 0626 0628 0630 0639 0672
0677 0681 0685 0689 0694 0698 0702 0706 0710 0715 0719 0723 0727 0736 0740
0744 0748 0753 0757 0761-0768 0771 0775 0779 0783 0787 0790 0794 0798 0804
0812 0829 0837 0846 0848 0870 0886 0894 0897 0902 0910 0912 0917 0924 0929
0933 0953 0960 0972 0981 0987 0993 1005 1017 1030 1040 1079 1091 1102 1122
(3) Effectivity by Operator
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting from transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 6

@A340-500/600
SERVICE BULLETIN
OPERATOR
 MSN
06U
 1091 1102
32P
 0560
39N
 0736
41N
 0924
65W
 0464 0577 0783 0837 0870 0929 0933 1030 1040
72W
 0917
81Q
 0563
83V
 0572
AHY
 0779 0886 0894
AIB
 0457 0471 0478 0485 0492 0499 0520 0608 0685
ARA
 0910
DLH
 0482 0517 0523 0537 0540 0543 0566 0569 0580 0583 0762 0763
0767 0771 0790 0794 0812 0846 0848 0897 0972 0981 0987 1005
ETD
 0757 0761 0829
F2I
 0575 0706 0723
G4I
 0748
GBB
 0611 0694
HFY
 0912
I2L
 0639
IBE
 0431 0440 0460 0601 0604 0606 0617 0619 0672 0702 0727 0744
0960 0993 1017 1079 1122
IRM
 0371 0376 0383 0391 0416 0449 0615
LHT
 0468 0488 0514 0586
QAF
 0495
QTR
 0715 0740 0766 0798
R1T
 0698
SAA
 0410 0417 0426 0531 0534 0547 0557 0626 0630
SOU
 0764
TAM
 0445
THA
 0624 0628 0677 0681 0689 0710 0719 0775 0953
THY
 0902
VIR
 0622 0753 0765 0768 0787 0804
(4) Configuration by MSN
MSN
 CONFIGURATION
0371 0376 0383 0391 0410 0416 0417 0426 0431 0440 0445
0449 0457 0460 0464 0468 0471 0478 0482 0485 0488 0492
0495 0499 0514 0517 0520 0523 0531 0534 0537 0540 0543
0547 0557 0560 0563 0566 0569 0572 0575 0577 0580 0583
0586 0601 0604 0606 0608 0611 0615 0617 0619 0622 0624
0626 0628 0630 0639 0672 0677 0681 0685 0689 0694 0698
0702 0706 0710 0715 0719 0723 0727 0736 0740 0744 0748
0753 0757 0761 0762 0763 0764 0765 0766 0767 0768 0771
0775 0779 0783 0787 0790 0794 0798 0804 0812 0829 0837
0846 0848 0870 0886 0894 0897 0902 0910 0912 0917 0924
0929 0933 0953 0960 0972 0981 0987 0993 1005 1017 1030
1040 1079 1091 1102 1122
001
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 7

@A340-500/600
SERVICE BULLETIN
(5) Configuration definition
**CONF 001
Config. 001 is valid for all the aircraft given in the effectivity of this Service Bulletin as a
standard configuration.
(6) Material Effectivity
MATERIAL
 QTY PER A/C
 SEE NOTES
Component COMPB01
 2
Component COMPB02
 2
Component COMPB03
 2
Consumable CMLB01
 1
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
Some slat track references were implemented as spares in Illustrated Parts Catalog
(IPC) in June 2010 when in fact those references for slat tracks No. 10 are not able to
sustain ultimate load for some weight variants.
IPC documents review and correction is still ongoing. AIRBUS is aiming to finalize the
correction in October 2018. Even investigation is demonstrating that impacted references
were never delivered as spare part, possible slat track swap between aircraft cannot be
excluded due to wrong IPC data.
(2) Objective/Action
The aim of this inspection is to identify if affected part numbers have been installed.
In case of wrong part installed, the slat track will have to be replaced according to the
accomplishment timescale. If no affected part number is installed, no further action is
requested.
(3) Advantages
Accomplishment of this Service Bulletin will contribute to make sure that the slat tracks
installed can sustain the ultimate loads corresponding to the weight variant of the
aircraft.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to :
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 8

@A340-500/600
SERVICE BULLETIN
Task 575047-832-895-001: Special Detailed Inspection of the Slat Tracks No. 10 References
(1) Inspect the Slat Track No. 10 Identification Plate on the LH Side
(2) Inspect the Slat Track No. 10 Identification Plate on the RH Side
(3) Depending on the Inspection Results, Remove the Link Parts between the Slat 4 and
the Slat Track No. 10 on the LH Side
(4) Depending on the Inspection Results, Remove the Link Parts between the Slat 4 and
the Slat Track No. 10 on the RH Side
(5) Depending on the Inspection Results, Do a Detailed Inspection in the Upper Area of
the Aft Lug of the Slat Track No. 10 on the LH Side
(6) Depending on the Inspection Results, Do a Detailed Inspection in the Upper Area of
the Aft Lug of the Slat Track No. 10 on the RH Side
(7) Depending on the Inspection Results, Do an HFEC Inspection in the Upper Area of
the Aft Lug of the Slat Track No. 10 on the LH Side
(8) Depending on the Inspection Results, Do an HFEC Inspection in the Upper Area of
the Aft Lug of the Slat Track No. 10 on the RH Side
(9) Depending on the Inspection Results, Install the Link Parts between the Slat 4 and
the Slat Track No. 10 on the LH Side
(10) Depending on the Inspection Results, Install the Link Parts between the Slat 4 and
the Slat Track No. 10 on the RH Side
(11) Depending on the Inspection Results, Identify the Slat Track No. 10 on the LH Side
(12) Depending on the Inspection Results, Identify the Slat Track No. 10 on the RH Side
Task 575047-833-895-001: Replacement of the Slat Track(s) No. 10
(1) Depending on the Inspection Results, Replace the Slat Track No. 10 on the LH Side
(2) Depending on the Inspection Results, Replace the Slat Track No. 10 on the RH Side
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
This Service Bulletin has been classified Mandatory. It is expected that an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA) will be issued
to confirm this classification. It is anticipated that the AD will confirm the thresholds
given but reference should be made to the AD for confirmation of the mandated
accomplishment timescale.
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 9

@A340-500/600
SERVICE BULLETIN
Table 1, Config 001 - Special Detailed Inspection of the Slat Track No. 10 Reference on the LH Side
Condition
 Action
 Compliance time
 Repetitive
interval
All aircraft
 Inspect the slat track No. 10
identification plate in accordance
with TASK 575047-832-895-001
Within 24 months from the
issuance date of this Service
Bulletin
None
Remove the link parts between the
slat 4 and the slat track No. 10 in
accordance with SUBTASK
575047-020-401-001
And
Before next flight
 None
If the
identification
plate is missing
or is not
readable
Measure the aft lug upper
thickness of the slat track No. 10 in
accordance with SUBTASK
575047-210-401-001
Before next flight
 None
Do a detailed inspection in the
upper area of the aft lug of the slat
track No. 10 in accordance with
SUBTASK 575047-220-401-001
And
Before next flight
 None
If the dimension
measured is
equal to 10.80
mm (0.425 in.)
Do an HFEC inspection in the
upper area of the aft lug of the slat
track No. 10 in accordance with
SUBTASK 575047-250-401-001
Before next flight
 None
Upload the inspection report
And
Before next flight
 None
Contact AIRBUS for slat track
spare preparation
And
Before next flight
 None
If the dimension
measured is
equal to 10.80
mm (0.425 in.)
and crack is
found
 Replace the affected slat track No.
10 by a new part number
F5746412700200 in accordance
with TASK 575047-833-895-001
Before next flight
 None
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 5
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 10

@A340-500/600
SERVICE BULLETIN
Table 1, Config 001 - Special Detailed Inspection of the Slat Track No. 10 Reference on the LH Side
Condition
 Action
 Compliance time
 Repetitive
interval
Install the link parts between the
slat 4 and the slat track No. 10 in
accordance with SUBTASK
575047-420-401-001
And
Before next flight
 None
Identify the slat track No. 10 in
accordance with SUBTASK
575047-831-401-001
And
Before next flight
 None
Upload the inspection report
And
Before next flight
 None
Contact AIRBUS for slat track
spare preparation
And
Before next flight
 None
If the dimension
measured is
equal to 10.80
mm (0.425 in.)
and no crack is
found
Replace the affected slat track No.
10 by a new part number
F5746412700200 in accordance
with TASK 575047-833-895-001
Within 3 months from the
inspection date
None
Install the link parts between the
slat 4 and the slat track No. 10 in
accordance with SUBTASK
575047-420-401-001
And
Before next flight
 None
Identify the slat track No. 10 in
accordance with SUBTASK
575047-831-401-001
And
Before next flight
 None
If the dimension
measured is not
equal to 10.80
mm (0.425 in.)
No further action
 None
 None
If the
identification
plate is not
missing and is
readable
Inspect the slat track No. 10 part
number in accordance with
SUBTASK 575047-210-401-001
Before next flight
 None
Remove the link parts between the
slat 4 and the slat track No. 10 in
accordance with SUBTASK
575047-020-401-001
And
Before next flight
 None
Do a detailed inspection in the
upper area of the aft lug of the slat
track No. 10 in accordance with
SUBTASK 575047-220-401-001
And
Before next flight
 None
If aircraft is
equipped with
part number
F5746411000000
or
F5746411000200
Do an HFEC inspection in the
upper area of the aft lug of the slat
track No. 10 in accordance with
SUBTASK 575047-250-401-001
Before next flight
 None
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 6
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 11

@A340-500/600
SERVICE BULLETIN
Table 1, Config 001 - Special Detailed Inspection of the Slat Track No. 10 Reference on the LH Side
Condition
 Action
 Compliance time
 Repetitive
interval
Upload the inspection report
And
Before next flight
 None
Contact AIRBUS for slat track
spare preparation
And
Before next flight
 None
If aircraft is
equipped with
part number
F5746411000000
or
F5746411000200,
and crack is
found
Replace the affected slat track No.
10 by a new part number
F5746412700200 in accordance
with TASK 575047-833-895-001
Before next flight
 None
Install the link parts between the
slat 4 and the slat track No. 10 in
accordance with SUBTASK
575047-420-401-001
And
Before next flight
 None
Upload the inspection report
And
Before next flight
 None
Contact AIRBUS for slat track
spare preparation
And
Before next flight
 None
If aircraft is
equipped with
part number
F5746411000000
or
F5746411000200,
and no crack is
found
Replace the affected slat track No.
10 by a new part number
F5746412700200 in accordance
with TASK 575047-833-895-001
Within 3 months from the
inspection date
None
If aircraft is not
equipped with
part number
F5746411000000
or
F5746411000200
No further action
 None
 None
Table 2, Config 001 - Special Detailed Inspection of the Slat Track No. 10 Reference on the RH Side
Condition
 Action
 Compliance time
 Repetitive
interval
All aircraft
 Inspect the slat track No. 10
identification plate in accordance with
TASK 575047-832-895-001
Within 24 months from the
issuance date of this Service
Bulletin
None
Remove the link parts between the
slat 4 and the slat track No. 10 in
accordance with SUBTASK
575047-832-895-001
And
Before next flight
 None
If the identification
plate is missing or
is not readable
Measure the aft lug upper thickness of
the slat track No. 10 in accordance
with SUBTASK 575047-210-402-001
Before next flight
 None
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 7
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 12

@A340-500/600
SERVICE BULLETIN
Table 2, Config 001 - Special Detailed Inspection of the Slat Track No. 10 Reference on the RH Side
Condition
 Action
 Compliance time
 Repetitive
interval
Do a detailed inspection in the upper
area of the aft lug of the slat track No.
10 in accordance with SUBTASK
575047-220-402-001
And
Before next flight
 None
If the dimension
measured is equal
to 10.80 mm
(0.425 in.)
Do an HFEC inspection in the upper
area of the aft lug of the slat track No.
10 in accordance with SUBTASK
575047-250-402-001
Before next flight
 None
Upload the inspection report
And
Before next flight
 None
Contact AIRBUS for slat track spare
preparation
And
Before next flight
 None
If the dimension
measured is equal
to 10.80 mm
(0.425 in.) and
crack is found
Replace the affected slat track No. 10
by a new part number
F5746412700200 in accordance with
TASK 575047-833-895-001
Before next flight
 None
Install the link parts between the slat
4 and the slat track No. 10 in
accordance with SUBTASK
575047-420-402-001
And
Before next flight
 None
Identify the slat track No. 10 in
accordance with SUBTASK
575047-831-402-001
And
Before next flight
 None
Upload the inspection report
And
Before next flight
 None
Contact AIRBUS for slat track spare
preparation
And
Before next flight
 None
If the dimension
measured is equal
to 10.80 mm
(0.425 in.) and no
crack is found
Replace the affected slat track No. 10
by a new part number
F5746412700200 in accordance with
TASK 575047-833-895-001
Within 3 months from the
inspection date
None
Install the link parts between the slat
4 and the slat track No. 10 in
accordance with SUBTASK
575047-420-402-001
And
Before next flight
 None
Identify the slat track No. 10 in
accordance with SUBTASK
575047-831-402-001
And
Before next flight
 None
If the dimension
measured is not
equal to 10.80
mm (0.425 in.)
No further action
 None
 None
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 8
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 13

@A340-500/600
SERVICE BULLETIN
Table 2, Config 001 - Special Detailed Inspection of the Slat Track No. 10 Reference on the RH Side
Condition
 Action
 Compliance time
 Repetitive
interval
If the identification
plate is not
missing and is
readable
Inspect the slat track No. 10 part
number in accordance with SUBTASK
575047-210-402-001
Before next flight
 None
Remove the link parts between the
slat 4 and the slat track No. 10 in
accordance with SUBTASK
575047-020-402-001
And
Before next flight
 None
Do a detailed inspection in the upper
area of the aft lug of the slat track No.
10 in accordance with SUBTASK
575047-220-402-001
And
Before next flight
 None
If aircraft is
equipped with part
number
F5746411000000
or
F5746411000200
Do an HFEC inspection in the upper
area of the aft lug of the slat track No.
10 in accordance with SUBTASK
575047-250-402-001
Before next flight
 None
Upload the inspection report
And
Before next flight
 None
Contact AIRBUS for slat track spare
preparation
And
Before next flight
 None
If aircraft is
equipped with part
number
F5746411000000
or
F5746411000200,
and crack is found
Replace the affected slat track No. 10
by a new part number
F5746412700200 in accordance with
TASK 575047-833-895-001
Before next flight
 None
Install the link parts between the slat
4 and the slat track No. 10 in
accordance with SUBTASK
575047-420-402-001
And
Before next flight
 None
Upload the inspection report
And
Before next flight
 None
Contact AIRBUS for slat track spare
preparation
And
Before next flight
 None
If aircraft is
equipped with part
number
F5746411000000
or
F5746411000200,
and no crack is
found
Replace the affected slat track No. 10
by a new part number
F5746412700200 in accordance with
TASK 575047-833-895-001
Within 3 months from the
inspection date
None
If aircraft is not
equipped with part
number
F5746411000000
or
F5746411000200
No further action
 None
 None
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 9
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 14

@A340-500/600
SERVICE BULLETIN
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organisation Approval No. EASA.21J.031.
If an aircraft listed in the effectivity has a modification or repair embodied that is not of
AIRBUS origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also not
included.
NOTE
: The minimum man-hours necessary to accomplish this Service Bulletin are
those for the Inspection. Depending on the inspection result, additional man-
hours can apply.
Task 575047-832-895-001: Special Detailed Inspection of the Slat Tracks No. 10 References
Get Access
 0.50
On Aircraft
Inspect the Slat Track No. 10 Identification Plate on the
LH Side
0.25
Inspect the Slat Track No. 10 Identification Plate on the
RH Side
0.25
Depending on the Inspection Results, Remove the Link
Parts between the Slat 4 and the Slat Track No. 10 on
the LH Side
0.50
Depending on the Inspection Results, Remove the Link
Parts between the Slat 4 and the Slat Track No. 10 on
the RH Side
0.50
Depending on the Inspection Results, Do a Detailed
Inspection in the Upper Area of the Aft Lug of the Slat
Track No. 10 on the LH Side
0.50
Depending on the Inspection Results, Do a Detailed
Inspection in the Upper Area of the Aft Lug of the Slat
Track No. 10 on the RH Side
0.50
Depending on the Inspection Results, Do an HFEC
Inspection in the Upper Area of the Aft Lug of the Slat
Track No. 10 on the LH Side
0.50
Depending on the Inspection Results, Do an HFEC
Inspection in the Upper Area of the Aft Lug of the Slat
Track No. 10 on the RH Side
0.50
Depending on the Inspection Results, Install the Link
Parts between the Slat 4 and the Slat Track No. 10 on
the LH Side
0.50
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 10
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 15

@A340-500/600
SERVICE BULLETIN
Task 575047-832-895-001: Special Detailed Inspection of the Slat Tracks No. 10 References
Depending on the Inspection Results, Install the Link
Parts between the Slat 4 and the Slat Track No. 10 on
the RH Side
0.50
Depending on the Inspection Results, Identify the Slat
Track No. 10 on the LH Side
0.50
Depending on the Inspection Results, Identify the Slat
Track No. 10 on the RH Side
0.50
Close-Up
 0.50
TOTAL MANHOURS
 6.50
ELAPSED TIME (HOURS)
 1.25
NOTE
: For an explanation of the man-hours and elapsed time, refer to the Gantt
Chart, Fig. A-UABAA
 given in Appendix 02.
Task 575047-833-895-001: Replacement of the Slat Track(s) No. 10
Get Access
 1.00
On Aircraft
Depending on the Inspection Results, Replace the Slat
Track No. 10 on the LH Side
3.00
Depending on the Inspection Results, Replace the Slat
Track No. 10 on the RH Side
3.00
Close-Up
 1.00
TOTAL MANHOURS
 8.00
ELAPSED TIME (HOURS)
 4.00
H. WEIGHT AND BALANCE
Not Changed
I. ELECTRICAL LOAD DATA
Not Changed
J. REFERENCES
Aircraft Maintenance Manual (AMM)
 06-20-00 12-34-24 20-21-11
27-80-00 27-84-69
Consumable Material List (CML)
Elec. Std. Practices Manual (ESPM)
 20-55-00
In Service Information (ISI)
 00.00.00285
00.05.00003
11.00.00002
Non Destructive Test Manual (NTM)
 51-10-08 51-90-00
Process and Material Specification (PMS)
 Process and Material Specification
(PMS) 01-06-13
Standards Manual (SM)
Structural Repair Manual (SRM)
 51-24-00 51-40-00 51-42-00
51-43-00 51-75-12
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 11
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 16

@A340-500/600
SERVICE BULLETIN
K. PUBLICATION AFFECTED
None
L. INTERCHANGEABILITY/MIXABILITY
Not Applicable
M. SPARES
None
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 12
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 17

@A340-500/600
SERVICE BULLETIN
2. MATERIAL INFORMATION
**CONF ALL
A. MATERIAL - PRICE AND AVAILABILITY
(1) Procurement Addresses
For standard hardware the purchase order shall be addressed to AIRBUS. Quote the
number of this Service Bulletin, the MSN and, if applicable the Retrofit Information Letter
(RIL) reference. Please send your request to:
Component COMPB01
Component COMPB02
AIRBUS Material, Logistics and Suppliers
Standard Parts
For ordering by internet:
http://spares.airbus.com or vi a SPEC2000
For ordering by E-mail:
ifd.spares@airbus.com
Phone: +49 (0) 40 50 76 40 03
Customers with aircraft shown in the effectivity of this Service Bulletin should send a
purchase order to AIRBUS. Quote the number of this Service Bulletin. The address is:
Component COMPB03
 AIRBUS Material, Logistics and Suppliers
IFD - In Flight Desk
Weg beim Jaeger 150
D-22335 HAMBURG
GERMANY
For ordering by internet:
http://spares.airbus.com
For ordering by fax: +49 40 50 76 4012
For ordering by E-mail:
ifd.spares@airbus.com
(2) Price and Availability
Operator supplied AIRBUS parts required to accomplish this Service Bulletin are to be
purchased by a spares purchase order.
Operator supplied standard hardware parts, required to accomplish this Service Bulletin,
are to be supplied from the operator’s stock.
B. INDUSTRY SUPPORT INFORMATION
In case of findings, AIRBUS will share the costs of accomplishment of this Service Bulletin by
crediting the operator supplied AIRBUS parts for orders placed within 24 months after the
initial issue date of the Service Bulletin.
AIRBUS will not credit the man-hours indicated in this Service Bulletin. They remain at
operator’s charge.
This Service Bulletin is the subject of an AIRBUS monitored retrofit campaign.
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 13
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 18

@A340-500/600
SERVICE BULLETIN
For the organization of this retrofit, you are kindly requested to contact AIRBUS retrofit
management department: monitored.retrofit@airbus.com.
C. LIST OF COMPONENTS
No Kit
D. LIST OF MATERIALS - OPERATOR SUPPLIED
(1) Consumable Materials
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO CML
MAT. No.
QTY PER A/C
 SEE
NOTES
Mineral Base Lubricating Oil -
General and Water-Disp
03BDB9
 As required
Synthetic Oil Base Grease -
General Purpose Clay Th
03GBB1
 As required
Coating - Flexible Structure
 04QAB2
 As required
Polysulfide Sealant - General
Purpose Brushable
06AAA1
 As required
Polysulfide Sealant - General
Purpose Fillet
06AAB1
 As required
Polysulfide Sealant - Fuel Tank
Brushable
06ABA1
 As required
Non Aqueous Cleaner - General
 08BAA9
 As required
Paste Adhesive-Epoxy Potting
Structure
13FBB2
 As required
Textile - Lint Free Cotton
 14SBA1
 As required
(2) Components
NOTE
: To accomplish this Service Bulletin it is necessary to use the expendable
parts listed in the subs equent referenced tasks:
- AMM Task 27-84-69-400-801.
Component COMPB01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 ITEM
 OLD PART N˚
 INT
 SEE
NOTES
11
 NSA5059C12
 1
 NUT
12
 NSA5059C10
 1
 NUT
13
 ABS0571-14W
 1
 BEARING
16
 MS24665-376
 2
 PIN
18
 NSA9117-22B
 1
 PLATE
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 14
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 19

@A340-500/600
SERVICE BULLETIN
NOTE
: If you find part numbers of hardware components in the related kit(s)
which you cannot identify in the LIST OF COMPONENTS of this Service
Bulletin, refer to Standards Manual (SM). The SM will give you the
correct part number to part number relationship.
NOTE
: The components listed above are only necessary if the identification
plate is missing or is not readable, and no crack is found. The quantity of
these items are to be ordered as required.
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
Component COMPB02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 ITEM
 OLD PART N˚
 INT
 SEE
NOTES
11
 NSA5059C12
 1
 NUT
12
 NSA5059C10
 2
 NUT
16
 MS24665-376
 3
 PIN
NOTE
: If you find part numbers of hardware components in the related kit(s)
which you cannot identify in the LIST OF COMPONENTS of this Service
Bulletin, refer to Standards Manual (SM). The SM will give you the
correct part number to part number relationship.
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
NOTE
: The components listed above are only necessary if the slat track No. 10
is replaced. The quantity of these items are to be ordered as required.
Component COMPB03
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 ITEM
 OLD PART N˚
 INT
 SEE
NOTES
19
 F5746412700200
 1
 TRACK
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
NOTE
: The components listed above are only necessary if the slat track No. 10
is replaced. The quantity of these items are to be ordered as required.
(3) Equipment
None
E. PARTS TO BE RE-IDENTIFIED BY OPERATOR
None
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 15
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 20

@A340-500/600
SERVICE BULLETIN
F. TOOLING
(1) Tooling - Price and Availability
None
(2) Tools
NOTE
: To accomplish this Service Bulletin it is necessary to use the tools listed
in the subsequent re ferenced tasks:
- AMM Task 27-80-00-866-801
- AMM Task 27-84-69-000-801
- NTM 51-10-08
- NTM 51-90-00.
(3) Special Tools
None
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 16
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 21

@A340-500/600
SERVICE BULLETIN
3. ACCOMPLISHMENT INSTRUCTIONS
Task 575047-832-895-001 - Special Detailed Insp ection of the Slat Tracks No. 10 References
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.
NOTE
: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
’refer to’ are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words ’in
accordance with’ are used then the given procedure must be followed.
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE
: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE
: This Service Bulletin contains the instructions for the on-aircraft maintenance
necessary to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, including RC paragraph contained herein,
contact AIRBUS for further instructions and approval.
NOTE
: The purpose of flowcharts is to supplement the information given in the Procedure
and Compliance paragraphs and not to serve as the primary source for tasks or
compliance times given in this Service Bulletin.
NOTE
: This Service Bulletin is classified mandatory or expected to be classified mandatory
by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.D. in these
accomplishment instructions are Required for Compliance (RC) and must be done
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 17
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 22

@A340-500/600
SERVICE BULLETIN
to comply with the AD. To allow more flexibility, the rule "refer to" and "in
accordance with" will apply to these paragraphs 3.C. and 3.D. Other paragraphs
are recommended and may be deviated from, done as part of other actions or
done with accepted methods different from those given in the Service Bulletin, as
long as the RC paragraphs can be done and the aircraft can be put back into a
serviceable condition.
NOTE
: Discarded parts must be managed at the operator’s discretion.
Task Associated Data
Zone
522 622
Manpower
TOTAL MANHOURS
 6.50
ELAPSED TIME (HOURS)
 1.25
A. GENERAL
(1) Subtask 575047-910-401-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 06-20-00, Page Block 001
Task 20-21-11-911-801
Consumable Material List (CML)
Structural Repair Manual (SRM)
 51-24-00
51-40-00
51-42-00
51-43-00
51-75-12
(a) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(b) If alternative and substitute fasteners have to be used, you must make sure that the
associated nut/collar are compatible in accordance with SRM 51-40-00 ’Mating Part’
column.
(c) Remove and install fasteners in accordance with SRM 51-42-00.
(d) Get alternative and substitute fastener data in accordance with SRM 51-43-00.
(e) To torque tighten the standard threaded fasteners, refer to AMM Task
20-21-11-911-801.
(f) Apply sealant in accordance with SRM 51-24-00.
(g) For the specification of Material Numbers (Mat. No.) given in this Service Bulletin,
refer to the Consumable Materials List (CML).
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 18
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 23

@A340-500/600
SERVICE BULLETIN
(h) Renew the protective finish in accordance with SRM 51-75-12.
(i) Tag all the parts you must remove and retain to make the subsequent installation
easier.
(j) Put all the retained hardware in identified plastic bags and attach the bags to the
related unit.
(k) If you find process and material specifications that you do not know in the design
drawings, refer to the cross-reference list in the Process and Material Specification
(PMS).
(2) Subtask 575047-839-401-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
B. PREPARATION
(1) Subtask 575047-941-401-001 - Job Set-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 12-34-24-860-802
Task 27-80-00-866-801
NOTE
: For the basic Aircraft configuration, refer to AMM Chapter "Introduction -
Aircraft status for maintenance" in Manual Front Matter section.
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(b) Extend the slats, refer to AMM Task 27-80-00-866-801.
(c) Put an access platform in position at zones 522 and 622.
C. PROCEDURE
(1) Subtask 575047-210-401-001 - Inspect the Slat Track No. 10 Identification Plate on
the LH Side
Work Zones and Access Panels
Zone
 Access/Work location
522
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 19
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 24

@A340-500/600
SERVICE BULLETIN
Manpower Resources
Manhours
 0.25
Minimum number of person
 1
Subtask elapsed time
 0.25
Skills
 NON SPECIFIC
Material necessary to do the job
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Non Aqueous Cleaner -
General
08BAA9
 As required
Textile - Lint Free Cotton
 14SBA1
 As required
References
Fig. A-UFAAA
Flowchart
Sheet 01
Sheet 02
Sheet 03
Fig. A-UBAAA
Inspection of the Identification Plate of
the Slat Track No. 10 on the LH Side
Sheet 01
Fig. A-UBEAA
Measurement of the Aft Lug Upper
Thickness of the Slat Track No. 10 on
the LH Side
Sheet 01
(a) At the threshold given in Tabl e 1 of the PLANNING INFORMATION paragraph
E.(2):
Refer to Fig. A-UFAAA
Inspect the slat track No. 10 identification plate on the LH side:
Refer to Fig. A-UBAAA
1
 Clean the area with:
Textile - Lint Free
Cotton
14SBA1 As required
Made moist with:
Non Aqueous
Cleaner - General
08BAA9 As required
2
 Inspect the slat track No. 10 identification plate:
Refer to Fig. A-UBAAA
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 20
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 25

@A340-500/600
SERVICE BULLETIN
a
 If the identification plate is missing or is not readable:
<1> Do SUBTASK 575047-020-401 001 Depending on the Inspection
Results, Remove the Link Parts between the Slat 4 and the Slat
Track No. 10 on the LH Side .
And
<2> Measure the aft lug upper thickness of the slat track No. 10 as
shown on Fig. A-UBEAA
.
NOTE
: Aft lug upper thickness equal to 10.80 mm (0.425 in)
or 14.80 mm (0.583 in).
<a> If the dimension measured is equal to 10.80 mm (0.425 in.):
[1] Do SUBTASK 575047-220-401 001 Depending on the
Inspection Results, Do a Detailed Inspection in the Upper
Area of the Aft Lug of the Slat Track No. 10 on the LH
Side .
And
[2] Do SUBTASK 575047-250-401 001 Depending on the
Inspection Results, Do an HFEC Inspection in the Upper
Area of the Aft Lug of the Slat Track No. 10 on the LH
Side .
[a] If crack is found:
- Upload the completed Inspection Report sheet
given in Appendix 01 in accordance with ISI
00.00.00179.
And
- Contact AIRBUS for slat track spare preparation.
And
- Replace the affected slat track No. 10 by
a new part number F5746412700200 at the
threshold given in the Table 1 of the PLANNING
INFORMATION paragraph E.(2), in accordance
with TASK 575047-833-895 001 Replacement of
the Slat Track(s) No. 10 .
[b] If no crack is found:
- Do SUBTASK 575047-420-401 001 Depending
on the Inspection Results, Install the Link Parts
between the Slat 4 and the Slat Track No. 10 on
t h eL HS i d e.
And
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 21
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 26

@A340-500/600
SERVICE BULLETIN
- Do SUBTASK 575047-831-401 001 Depending
on the Inspection Results, Identify the Slat Track
No. 10 on the LH Side .
And
- Upload the completed Inspection Report sheet
given in Appendix 01 in accordance with ISI
00.00.00179.
And
- Contact AIRBUS for slat track spare preparation.
And
- Replace the affected slat track No. 10 by
a new part number F5746412700200 at the
threshold given in the Table 1 of the PLANNING
INFORMATION paragraph E.(2), in accordance
with TASK 575047-833-895 001 Replacement of
the Slat Track(s) No. 10 .
<b> If the dimension measured is not equal to 10.80 mm (0.425
in.):
[1] Do SUBTASK 575047-420-401 001 Depending on the
Inspection Results, Install the Link Parts between the Slat
4 and the Slat Track No. 10 on the LH Side .
And
[2] Do SUBTASK 575047-831-401 001 Depending on the
Inspection Results, Identify the Slat Track No. 10 on the
LH Side .
And
[3] No further action.
b
 If the identification plate is not missing and is readable:
<1> Inspect the slat track No. 10 part number.
<a> If aircraft is equipped with part number F5746411000000 or
F5746411000200:
[1] Do SUBTASK 575047-020-401 001 Depending on the
Inspection Results, Remove the Link Parts between the
Slat 4 and the Slat Track No. 10 on the LH Side .
And
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 22
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 27

@A340-500/600
SERVICE BULLETIN
[2] Do SUBTASK 575047-220-401 001 Depending on the
Inspection Results, Do a Detailed Inspection in the Upper
Area of the Aft Lug of the Slat Track No. 10 on the LH
Side .
And
[3] Do SUBTASK 575047-250-401 001 Depending on the
Inspection Results, Do an HFEC Inspection in the Upper
Area of the Aft Lug of the Slat Track No. 10 on the LH
Side .
[a] If crack is found:
- Upload the completed Inspection Report sheet
given in Appendix 01 in accordance with ISI
00.00.00179.
And
- Contact AIRBUS for slat track spare preparation.
And
- Replace the affected slat track No. 10 by
a new part number F5746412700200 at the
threshold given in the Table 1 of the PLANNING
INFORMATION paragraph E.(2), in accordance
with TASK 575047-833-895 001 Replacement of
the Slat Track(s) No. 10 .
[b] If no crack is found:
- Do SUBTASK 575047-420-401 001 Depending
on the Inspection Results, Install the Link Parts
between the Slat 4 and the Slat Track No. 10 on
t h eL HS i d e.
And
- Upload the completed Inspection Report sheet
given in Appendix 01 in accordance with ISI
00.00.00179.
And
- Contact AIRBUS for slat track spare preparation.
And
- Replace the affected slat track No. 10 by
a new part number F5746412700200 at the
threshold given in the Table 1 of the PLANNING
INFORMATION paragraph E.(2), in accordance
with TASK 575047-833-895 001 Replacement of
the Slat Track(s) No. 10 .
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 23
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 28

@A340-500/600
SERVICE BULLETIN
<b> If aircraft is not equipped with part number F5746411000000 or
F5746411000200:
[1] No further action.
(2) Subtask 575047-210-402-001 - Inspect the Slat Track No. 10 Identification Plate on
the RH Side
Work Zones and Access Panels
Zone
 Access/Work location
622
Manpower Resources
Manhours
 0.25
Minimum number of person
 1
Subtask elapsed time
 0.25
Skills
 NON SPECIFIC
Material necessary to do the job
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Non Aqueous Cleaner -
General
08BAA9
 As required
Textile - Lint Free Cotton
 14SBA1
 As required
References
Fig. A-UBBAA
Inspection of the Identification Plate of
the Slat Track No. 10 on the RH Side
Sheet 01
Fig. A-UFAAA
Flowchart
Sheet 01
Sheet 02
Sheet 03
Fig. A-UBFAA
Measurement of the Aft Lug Upper
Thickness of the Slat Track No. 10 on
the RH Side
Sheet 01
(a) At the threshold given in Tabl e 2 of the PLANNING INFORMATION paragraph
E.(2):
Refer to Fig. A-UFAAA
Inspect the slat track No. 10 identification plate on the RH side:
Refer to Fig. A-UBBAA
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 24
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 29

@A340-500/600
SERVICE BULLETIN
1
 Clean the area with:
Textile - Lint Free
Cotton
14SBA1 As required
Made moist with:
Non Aqueous
Cleaner - General
08BAA9 As required
2
 Inspect the slat track No. 10 identification plate.
Refer to Fig. A-UBBAA
a
 If the identification plate is missing or is not readable:
<1> Do SUBTASK 575047-020-402 001 Depending on the Inspection
Results, Remove the Link Parts between the Slat 4 and the Slat
Track No. 10 on the RH Side .
And
<2> Measure the aft lug upper thickness of the slat track No. 10 as
shown on Fig. A-UBFAA
.
NOTE
: Aft lug upper thickness equal to 10.80 mm (0.425 in)
or 14.80 mm (0.583 in).
<a> If the dimension measured is equal to 10.80 mm (0.425 in.):
[1] Do SUBTASK 575047-220-402 001 Depending on the
Inspection Results, Do a Detailed Inspection in the Upper
Area of the Aft Lug of the Slat Track No. 10 on the RH
Side .
And
[2] Do SUBTASK 575047-250-402 001 Depending on the
Inspection Results, Do an HFEC Inspection in the Upper
Area of the Aft Lug of the Slat Track No. 10 on the RH
Side .
[a] If crack is found:
- Upload the completed Inspection Report sheet
given in Appendix 01 in accordance with ISI
00.00.00179.
And
- Contact AIRBUS for slat track spare preparation.
And
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 25
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 30

@A340-500/600
SERVICE BULLETIN
- Replace the affected slat track No. 10 by
a new part number F5746412700200 at the
threshold given in the Table 2 of the PLANNING
INFORMATION paragraph E.(2), in accordance
with TASK 575047-833-895 001 Replacement of
the Slat Track(s) No. 10 .
[b] If no crack is found:
- Do SUBTASK 575047-420-402 001 Depending
on the Inspection Results, Install the Link Parts
between the Slat 4 and the Slat Track No. 10 on
the RH Side .
And
- Do SUBTASK 575047-831-402 001 Depending
on the Inspection Results, Identify the Slat Track
No. 10 on the RH Side .
And
- Upload the completed Inspection Report sheet
given in Appendix 01 in accordance with ISI
00.00.00179.
And
- Contact AIRBUS for slat track spare preparation.
And
- Replace the affected slat track No. 10 by
a new part number F5746412700200 at the
threshold given in the Table 2 of the PLANNING
INFORMATION paragraph E.(2), in accordance
with TASK 575047-833-895 001 Replacement of
the Slat Track(s) No. 10 .
<b> If the dimension measured is not equal to 10.80 mm (0.425
in.):
[1] Do SUBTASK 575047-420-402 001 Depending on the
Inspection Results, Install the Link Parts between the Slat
4 and the Slat Track No. 10 on the RH Side .
And
[2] Do SUBTASK 575047-831-402 001 Depending on the
Inspection Results, Identify the Slat Track No. 10 on the
RH Side .
And
[3] No further action.
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 26
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 31

@A340-500/600
SERVICE BULLETIN
b
 If the identification plate is not missing and is readable:
<1> Inspect the slat track No. 10 part number.
<a> If aircraft is equipped with part number F5746411000000 or
F5746411000200:
[1] Do SUBTASK 575047-020-402 001 Depending on the
Inspection Results, Remove the Link Parts between the
Slat 4 and the Slat Track No. 10 on the RH Side .
And
[2] Do SUBTASK 575047-220-402 001 Depending on the
Inspection Results, Do a Detailed Inspection in the Upper
Area of the Aft Lug of the Slat Track No. 10 on the RH
Side .
And
[3] Do SUBTASK 575047-250-402 001 Depending on the
Inspection Results, Do an HFEC Inspection in the Upper
Area of the Aft Lug of the Slat Track No. 10 on the RH
Side .
[a] If crack is found:
- Upload the completed Inspection Report sheet
given in Appendix 01 in accordance with ISI
00.00.00179.
And
- Contact AIRBUS for slat track spare preparation.
And
- Replace the affected slat track No. 10 by
a new part number F5746412700200 at the
threshold given in the Table 2 of the PLANNING
INFORMATION paragraph E.(2), in accordance
with TASK 575047-833-895 001 Replacement of
the Slat Track(s) No. 10 .
[b] If no crack is found:
- Do SUBTASK 575047-420-402 001 Depending
on the Inspection Results, Install the Link Parts
between the Slat 4 and the Slat Track No. 10 on
the RH Side .
And
- Upload the completed Inspection Report sheet
given in Appendix 01 in accordance with ISI
00.00.00179.
And
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 27
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 32

@A340-500/600
SERVICE BULLETIN
- Contact AIRBUS for slat track spare preparation.
And
- Replace the affected slat track No. 10 by
a new part number F5746412700200 at the
threshold given in the Table 2 of the PLANNING
INFORMATION paragraph E.(2), in accordance
with TASK 575047-833-895 001 Replacement of
the Slat Track(s) No. 10 .
<b> If aircraft is not equipped with part number F5746411000000 or
F5746411000200:
[1] No further action.
(3) Subtask 575047-020-401-001 - Depending on the Inspection Results, Remove the
Link Parts between the Slat 4 and the Slat Track No. 10 on the LH Side
Work Zones and Access Panels
Zone
 Access/Work location
522
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
References
Structural Repair Manual (SRM)
 51-42-00
Fig. A-UBCAA
Removal/Installation of the Link Parts
between the Slat 4 and the Slat Track
No. 10 on the LH Side
Sheet 01
(a) Remove the link parts between the slat 4 and the slat track No. 10:
Refer to Fig. A-UBCAA
In accordance with SRM 51-42-00
1 Bolt Item (1) Retain
1 Bolt Item (2) Retain
1 Bolt Item (4) Retain
1 Bush Item (3) Retain
1 Locking Plate Item (5) Retain
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 28
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 33

@A340-500/600
SERVICE BULLETIN
1 Link Outboard Item (6) Retain
1 Link Inboard Item (8) Retain
2 Washer Item (9) Retain
1 Nut Item (7) Retain
1 Nut Item (11) Discard
1 Nut Item (12) Discard
1 Bearing Item (13) Discard
2 Pin-Cotter Item (16) Discard
(4) Subtask 575047-020-402-001 - Depending on the Inspection Results, Remove the
Link Parts between the Slat 4 and the Slat Track No. 10 on the RH Side
Work Zones and Access Panels
Zone
 Access/Work location
622
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
References
Structural Repair Manual (SRM)
 51-42-00
Fig. A-UBDAA
Removal/Installation of the Link Parts
between the Slat 4 and the Slat Track
No. 10 on the RH Side
Sheet 01
(a) Remove the link parts between the slat 4 and the slat track No. 10:
Refer to Fig. A-UBDAA
In accordance with SRM 51-42-00
1 Bolt Item (1) Retain
1 Bolt Item (2) Retain
1 Bolt Item (4) Retain
1 Bush Item (3) Retain
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 29
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 34

@A340-500/600
SERVICE BULLETIN
1 Locking Plate Item (5) Retain
1 Link Outboard Item (6) Retain
1 Link Inboard Item (8) Retain
2 Washer Item (9) Retain
1 Nut Item (7) Retain
1 Nut Item (11) Discard
1 Nut Item (12) Discard
1 Bearing Item (13) Discard
2 Pin-Cotter Item (16) Discard
(5) Subtask 575047-220-401-001 - Depending on the Inspection Results, Do a Detailed
Inspection in the Upper Area of the Aft Lug of the Slat Track No. 10 on the LH
Side
Work Zones and Access Panels
Zone
 Access/Work location
522
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
Material necessary to do the job
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Non Aqueous Cleaner -
General
08BAA9
 As required
Textile - Lint Free Cotton
 14SBA1
 As required
References
Non Destructive Test Manual (NTM)
 51-90-00
Fig. A-UBGAA
Inspection of the Slat Track No. 10 on
the LH Side
Sheet 01
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 30
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 35

@A340-500/600
SERVICE BULLETIN
References
Fig. A-UFAAA
Flowchart
Sheet 01
Sheet 02
Sheet 03
(a) At the threshold given in Tabl e 1 of the PLANNING INFORMATION paragraph
E.(2):
Refer to Fig. A-UFAAA
Do a detailed inspection in the upper area of the aft lug of the slat track No. 10 on
the LH side:
Refer to Fig. A-UBGAA
1
 Use a non metallic spatula to remove the sealant and clean the area with:
Textile - Lint Free
Cotton
14SBA1 As required
Made moist with:
Non Aqueous
Cleaner - General
08BAA9 As required
2
 Do a detailed visual inspection, refer to NTM 51-90-00.
(6) Subtask 575047-220-402-001 - Depending on the Inspection Results, Do a Detailed
Inspection in the Upper Area of the Aft Lug of the Slat Track No. 10 on the RH
Side
Work Zones and Access Panels
Zone
 Access/Work location
622
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
Material necessary to do the job
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Non Aqueous Cleaner -
General
08BAA9
 As required
Textile - Lint Free Cotton
 14SBA1
 As required
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 31
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 36

@A340-500/600
SERVICE BULLETIN
References
Non Destructive Test Manual (NTM)
 51-90-00
Fig. A-UBHAA
Inspection of the Slat Track No. 10 on
the RH Side
Sheet 01
Fig. A-UFAAA
Flowchart
Sheet 01
Sheet 02
Sheet 03
(a) At the threshold given in Tabl e 2 of the PLANNING INFORMATION paragraph
E.(2):
Refer to Fig. A-UFAAA
Do a detailed inspection in the upper area of the aft lug of the slat track No. 10 on
the RH side:
Refer to Fig. A-UBHAA
1
 Use a non metallic spatula to remove the sealant and clean the area with:
Textile - Lint Free
Cotton
14SBA1 As required
Made moist with:
Non Aqueous
Cleaner - General
08BAA9 As required
2
 Do a detailed visual inspection, refer to NTM 51-90-00.
(7) Subtask 575047-250-401-001 - Depending on the Inspection Results, Do an HFEC
Inspection in the Upper Area of the Aft Lug of the Slat Track No. 10 on the LH
Side
Work Zones and Access Panels
Zone
 Access/Work location
522
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 NON DESTRUCTIVE
TESTING
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 32
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 37

@A340-500/600
SERVICE BULLETIN
Material necessary to do the job
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Non Aqueous Cleaner -
General
08BAA9
 As required
Textile - Lint Free Cotton
 14SBA1
 As required
References
Non Destructive Test Manual (NTM)
 51-10-08
Fig. A-UBGAA
Inspection of the Slat Track No. 10 on
the LH Side
Sheet 01
Fig. A-UFAAA
Flowchart
Sheet 01
Sheet 02
Sheet 03
(a) At the threshold given in Tabl e 1 of the PLANNING INFORMATION paragraph
E.(2):
Refer to Fig. A-UFAAA
Do a High Frequency Eddy Current (HFEC) inspection in the upper area of the aft
lug of the slat track No. 10 on the LH side:
Refer to Fig. A-UBGAA
1
 Use a non metallic spatula to remove the sealant and clean the area with:
Textile - Lint Free
Cotton
14SBA1 As required
Made moist with:
Non Aqueous
Cleaner - General
08BAA9 As required
2
 Do an HFEC inspection in the upper area of the aft lug of the slat track No. 10
on the LH side, refer to NTM 51-10-08.
(8) Subtask 575047-250-402-001 - Depending on the Inspection Results, Do an HFEC
Inspection in the Upper Area of the Aft Lug of the Slat Track No. 10 on the RH
Side
Work Zones and Access Panels
Zone
 Access/Work location
622
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 33
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 38

@A340-500/600
SERVICE BULLETIN
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 NON DESTRUCTIVE
TESTING
Material necessary to do the job
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Non Aqueous Cleaner -
General
08BAA9
 As required
Textile - Lint Free Cotton
 14SBA1
 As required
References
Non Destructive Test Manual (NTM)
 51-10-08
Fig. A-UBHAA
Inspection of the Slat Track No. 10 on
the RH Side
Sheet 01
Fig. A-UFAAA
Flowchart
Sheet 01
Sheet 02
Sheet 03
(a) At the threshold given in Tabl e 2 of the PLANNING INFORMATION paragraph
E.(2):
Refer to Fig. A-UFAAA
Do an HFEC inspection in the upper area of the aft lug of the slat track No. 10 on
the RH side:
Refer to Fig. A-UBHAA
1
 Use a non metallic spatula to remove the sealant and clean the area with:
Textile - Lint Free
Cotton
14SBA1 As required
Made moist with:
Non Aqueous
Cleaner - General
08BAA9 As required
2
 Do an HFEC inspection in the upper area of the aft lug of the slat track No. 10
on the RH side, refer to NTM 51-10-08.
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 34
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 39

@A340-500/600
SERVICE BULLETIN
(9) Subtask 575047-420-401-001 - Depending on the Inspection Results, Install the
Link Parts between the Slat 4 and the Slat Track No. 10 on the LH Side
Work Zones and Access Panels
Zone
 Access/Work location
522
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
Material necessary to do the job
Component COMPB01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
11
 NSA5059C12
 1
 NUT
12
 NSA5059C10
 1
 NUT
13
 ABS0571-14W
 1
 BEARING
16
 MS24665-376
 2
 PIN
NOTE
: The components listed above are only necessary if the identification
plate is missing or is not readable, and no crack is found. The quantity of
these items are to be ordered as required.
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Mineral Base Lubricating Oil
- General and Water-Disp
03BDB9
 As required
Synthetic Oil Base Grease -
General Purpose Clay Th
03GBB1
 As required
Coating - Flexible Structure
 04QAB2
 As required
Polysulfide Sealant -
General Purpose Brushable
06AAA1
 As required
Polysulfide Sealant -
General Purpose Fillet
06AAB1
 As required
Polysulfide Sealant - Fuel
Tank Brushable
06ABA1
 As required
References
Aircraft Maintenance Manual (AMM)
 Task 20-21-11-911-801
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 35
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 40

@A340-500/600
SERVICE BULLETIN
References
Structural Repair Manual (SRM)
 51-24-00
51-40-00
51-42-00
51-43-00
51-75-12
Fig. A-UBCAA
Removal/Installation of the Link Parts
between the Slat 4 and the Slat Track
No. 10 on the LH Side
Sheet 01
(a) Install the link parts between the slat 4 and the slat track No. 10:
1
 Protect temporarily the unpainted areas of the track with:
Refer to Fig. A-UBCAA
Mineral Base
Lubricating Oil -
General and Water-
Disp
03BDB9 As required
2
 Install the bearing:
Refer to Fig. A-UBCAA
1 Bearing ABS0571-14W Item 13
Apply interfay sealant with:
In accordance with SRM 51-24-00
Polysulfide Sealant
- General Purpose
Brushable
06AAA1 As required
Apply external fillet sealing with:
In accordance with SRM 51-24-00
Polysulfide Sealant
- General Purpose
Fillet
06AAB1 As required
3
 Install the link parts:
In accordance with SRM 51-40-00, SRM 51-42-00 and SRM 51-43-00
Refer to AMM Task 20-21-11-911-801
Refer to Fig. A-UBCAA
1 Bolt Item (1) Retained at
removal
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 36
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 41

@A340-500/600
SERVICE BULLETIN
1 Bolt Item (2) Retained at
removal
1 Bolt Item (4) Retained at
removal
1 Bush Item (3) Retained at
removal
1 Locking Plate Item (5) Retained at
removal
1 Link Outboard Item (6) Retained at
removal
1 Link Inboard Item (8) Retained at
removal
2 Washer Item (9) Retained at
removal
1 Nut Item (7) Retained at
removal
1 Nut NSA5059C12 Item 11
Tigthen the nut to a torque value comprised between 4.60 m.daN and 7.60
m.daN (407.135 lbf.in. and 672.656 lbf.in.).
1 Nut NSA5059C10 Item 12
Tigthen the nut to a torque value comprised between 3.40 m.daN and 4.80
m.daN (300.926 lbf.in. and 424.835 lbf.in.).
2 Pin-Cotter MS24665-376 Item 16
Lubricate the pins with:
Synthetic Oil Base
Grease - General
Purpose Clay Th
03GBB1 As required
Overcoat the bolts and nuts with:
In accordance with SRM 51-24-00
Polysulfide Sealant
- Fuel Tank
Brushable
06ABA1 As required
Protect the fastener heads with:
In accordance with SRM 51-75-12
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 37
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 42

@A340-500/600
SERVICE BULLETIN
Coating - Flexible
Structure
04QAB2 As required
(10) Subtask 575047-420-402-001 - Depending on the Inspection Results, Install the
Link Parts between the Slat 4 and the Slat Track No. 10 on the RH Side
Work Zones and Access Panels
Zone
 Access/Work location
622
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
Material necessary to do the job
Component COMPB01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
11
 NSA5059C12
 1
 NUT
12
 NSA5059C10
 1
 NUT
13
 ABS0571-14W
 1
 BEARING
16
 MS24665-376
 2
 PIN
NOTE
: The components listed above are only necessary if the identification
plate is missing or is not readable, and no crack is found. The quantity of
these items are to be ordered as required.
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Mineral Base Lubricating Oil
- General and Water-Disp
03BDB9
 As required
Synthetic Oil Base Grease -
General Purpose Clay Th
03GBB1
 As required
Coating - Flexible Structure
 04QAB2
 As required
Polysulfide Sealant -
General Purpose Brushable
06AAA1
 As required
Polysulfide Sealant -
General Purpose Fillet
06AAB1
 As required
Polysulfide Sealant - Fuel
Tank Brushable
06ABA1
 As required
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 38
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 43

@A340-500/600
SERVICE BULLETIN
References
Aircraft Maintenance Manual (AMM)
 Task 20-21-11-911-801
Structural Repair Manual (SRM)
 51-24-00
51-40-00
51-42-00
51-43-00
51-75-12
Fig. A-UBDAA
Removal/Installation of the Link Parts
between the Slat 4 and the Slat Track
No. 10 on the RH Side
Sheet 01
(a) Install the link parts between the slat 4 and the slat track No. 10:
1
 Protect temporarily the unpainted areas of the track with:
Refer to Fig. A-UBDAA
Mineral Base
Lubricating Oil -
General and Water-
Disp
03BDB9 As required
2
 Install the bearing:
Refer to Fig. A-UBDAA
1 Bearing ABS0571-14W Item 13
Apply interfay sealant with:
In accordance with SRM 51-24-00
Polysulfide Sealant
- General Purpose
Brushable
06AAA1 As required
Apply external fillet sealing with:
In accordance with SRM 51-24-00
Polysulfide Sealant
- General Purpose
Fillet
06AAB1 As required
3
 Install the link parts:
In accordance with SRM 51-40-00, SRM 51-42-00 and SRM 51-43-00
Refer to AMM Task 20-21-11-911-801
Refer to Fig. A-UBDAA
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 39
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 44

@A340-500/600
SERVICE BULLETIN
1 Bolt Item (1) Retained at
removal
1 Bolt Item (2) Retained at
removal
1 Bolt Item (4) Retained at
removal
1 Bush Item (3) Retained at
removal
1 Locking Plate Item (5) Retained at
removal
1 Link Outboard Item (6) Retained at
removal
1 Link Inboard Item (8) Retained at
removal
2 Washer Item (9) Retained at
removal
1 Nut Item (7) Retained at
removal
1 Nut NSA5059C12 Item 11
Tigthen the nut to a torque value comprised between 4.60 m.daN and 7.60
m.daN (407.135 lbf.in. and 672.656 lbf.in.).
1 Nut NSA5059C10 Item 12
Tigthen the nut to a torque value comprised between 3.40 m.daN and 4.80
m.daN (300.926 lbf.in. and 424.835 lbf.in.).
2 Pin-Cotter MS24665-376 Item 16
Lubricate the pins with:
Synthetic Oil Base
Grease - General
Purpose Clay Th
03GBB1 As required
Overcoat the bolts and nuts with:
In accordance with SRM 51-24-00
Polysulfide Sealant
- Fuel Tank
Brushable
06ABA1 As required
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 40
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 45

@A340-500/600
SERVICE BULLETIN
Protect the fastener heads with:
In accordance with SRM 51-75-12
Coating - Flexible
Structure
04QAB2 As required
(11) Subtask 575047-831-401-001 - Depending on th e Inspection Results, Identify the
Slat Track No. 10 on the LH Side
Work Zones and Access Panels
Zone
 Access/Work location
522
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
Material necessary to do the job
Component COMPB01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
18
 NSA9117-22B
 1
 PLATE
NOTE
: The components listed above are only necessary if the identification
plate is missing or is not readable, and no crack is found. The quantity of
these items are to be ordered as required.
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Non Aqueous Cleaner -
General
08BAA9
 As required
Paste Adhesive-Epoxy
Potting Structure
13FBB2
 As required
Textile - Lint Free Cotton
 14SBA1
 As required
References
In Service Information (ISI)
 00.00.00285
00.05.00003
11.00.00002
Process and Material Specification
(PMS)
Process and Material Specification (PMS)
01-06-13
Structural Repair Manual (SRM)
 51-24-00
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 41
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 46

@A340-500/600
SERVICE BULLETIN
References
Fig. A-UBKAA
Identification of the Slat Track No. 10 on
the LH Side
Sheet 01
(a) Identify the slat track No. 10:
Refer to Fig. A-UBKAA
1
 Remove the identification plate:
1 Identification Plate Item (18) Discard
NOTE
: If the identification plate is missing, go to the next step.
2
 Identify the part number:
Refer to Process and Material Specification (PMS) 01-06-13
NOTE
: The plate identification and exchange is described in OIT
No. 999-0058/16, OIT No 999-0066/17, ISI 00.00.00285, ISI
00.05.00003 and ISI 11.00.00002.
a
 In case of the slat track No. 10 reference number can be identified via
documentation or because no exchange of part since delivery, write the
corresponding part number on the identification plate, item 18.
b
 In case of difficulties to identify the part number of the slat track No. 10,
contact AIRBUS.
3
 Use a non metallic spatula to remove the sealant and clean the area with:
Textile - Lint Free
Cotton
14SBA1 As required
Made moist with:
Non Aqueous
Cleaner - General
08BAA9 As required
4
 Install the identification plate:
1 Plate-Identification NSA9117-22B Item 18
Install with:
In accordance with SRM 51-24-00
Paste Adhesive-
Epoxy Potting
Structure
13FBB2 As required
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 42
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 47

@A340-500/600
SERVICE BULLETIN
(12) Subtask 575047-831-402-001 - Depending on th e Inspection Results, Identify the
Slat Track No. 10 on the RH Side
Work Zones and Access Panels
Zone
 Access/Work location
622
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
Material necessary to do the job
Component COMPB01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
18
 NSA9117-22B
 1
 PLATE
NOTE
: The components listed above are only necessary if the identification
plate is missing or is not readable, and no crack is found. The quantity of
these items are to be ordered as required.
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Non Aqueous Cleaner -
General
08BAA9
 As required
Paste Adhesive-Epoxy
Potting Structure
13FBB2
 As required
Textile - Lint Free Cotton
 14SBA1
 As required
References
In Service Information (ISI)
 00.00.00285
00.05.00003
11.00.00002
Process and Material Specification
(PMS)
Process and Material Specification (PMS)
01-06-13
Structural Repair Manual (SRM)
 51-24-00
Fig. A-UBLAA
Identification of the Slat Track No. 10 on
the RH Side
Sheet 01
(a) Identify the slat track No. 10:
Refer to Fig. A-UBLAA
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 43
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 48

@A340-500/600
SERVICE BULLETIN
1
 Remove the identification plate:
1 Identification Plate Item (18) Discard
NOTE
: If the identification plate is missing, go to the next step.
2
 Identify the part number:
Refer to Process and Material Specification (PMS) 01-06-13
NOTE
: The plate identification and exchange is described in OIT
No. 999-0058/16, OIT No 999-0066/17, ISI 00.00.00285, ISI
00.05.00003 and ISI 11.00.00002.
a
 In case of the slat track No. 10 reference number can be identified via
documentation or because no exchange of part since delivery, write the
corresponding part number on the identification plate, item 18.
b
 In case of difficulties to identify the part number of the slat track No. 10,
contact AIRBUS.
3
 Use a non metallic spatula to remove the sealant and clean the area with:
Textile - Lint Free
Cotton
14SBA1 As required
Made moist with:
Non Aqueous
Cleaner - General
08BAA9 As required
4
 Install the identification plate:
1 Plate-Identification NSA9117-22B Item 18
Install with:
In accordance with SRM 51-24-00
Paste Adhesive-
Epoxy Potting
Structure
13FBB2 As required
D. TEST
None
E. CLOSE-UP
NOTE
: If you intend to accomplish an associated Repair Task during the same
layover period, the subsequent Close-up procedure is not necessary.
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 44
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 49

@A340-500/600
SERVICE BULLETIN
(1) Subtask 575047-942-401-001 - Close-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 27-80-00-866-802
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Remove the access platform(s).
(c) Retract the slats, refer to AMM Task 27-80-00-866-802.
(d) Put the aircraft back to its initial configuration.
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 45
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 50

@A340-500/600
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 46
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 51

@A340-500/600
SERVICE BULLETIN
Task 575047-833-895-001 - Replacement of the Slat Track(s) No. 10
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.
NOTE
: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
’refer to’ are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words ’in
accordance with’ are used then the given procedure must be followed.
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE
: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE
: This Service Bulletin contains the instructions for the on-aircraft maintenance
necessary to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, including RC paragraph contained herein,
contact AIRBUS for further instructions and approval.
NOTE
: This Service Bulletin is classified mandatory or expected to be classified mandatory
by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.D. in these
accomplishment instructions are Required for Compliance (RC) and must be done
to comply with the AD. To allow more flexibility, the rule "refer to" and "in
accordance with" will apply to these paragraphs 3.C. and 3.D. Other paragraphs
are recommended and may be deviated from, done as part of other actions or
done with accepted methods different from those given in the Service Bulletin, as
long as the RC paragraphs can be done and the aircraft can be put back into a
serviceable condition.
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 47
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 52

@A340-500/600
SERVICE BULLETIN
NOTE
: Discarded parts must be managed at the operator’s discretion.
Task Associated Data
Zone
522 622
Manpower
TOTAL MANHOURS
 8.00
ELAPSED TIME (HOURS)
 4.00
A. GENERAL
(1) Subtask 575047-910-402-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 06-20-00, Page Block 001
Task 20-21-11-911-801
Consumable Material List (CML)
Structural Repair Manual (SRM)
 51-24-00
51-40-00
51-42-00
51-43-00
51-75-12
(a) For the identification of zones, refer to AMM 06-20-00, Page Block 001.
(b) If alternative and substitute fasteners have to be used, you must make sure that the
associated nut/collar are compatible in accordance with SRM 51-40-00 ’Mating Part’
column.
(c) Remove and install fasteners in accordance with SRM 51-42-00.
(d) Get alternative and substitute fastener data in accordance with SRM 51-43-00.
(e) To torque tighten the standard threaded fasteners, refer to AMM Task
20-21-11-911-801.
(f) Apply sealant in accordance with SRM 51-24-00.
(g) For the specification of Material Numbers (Mat. No.) given in this Service Bulletin,
refer to the Consumable Materials List (CML).
(h) Renew the protective finish in accordance with SRM 51-75-12.
(i) Tag all the parts you must remove and retain to make the subsequent installation
easier.
(j) Put all the retained hardware in identified plastic bags and attach the bags to the
related unit.
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 48
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 53

@A340-500/600
SERVICE BULLETIN
(2) Subtask 575047-839-402-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
B. PREPARATION
NOTE
: If you intend to accomplish this Repair Task during the same layover period
as the associated Inspection, the subsequent General Job Set-up procedure
is not necessary.
(1) Subtask 575047-941-402-001 - General Job Set-up
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 12-34-24-860-802
NOTE
: For the basic Aircraft configuration, refer to AMM Chapter "Introduction -
Aircraft status for maintenance" in Manual Front Matter section.
(a) Make sure that the aircraft is electrically grounded, refer to AMM Task
12-34-24-860-802.
(2) Subtask 575047-941-403-001 - Job Set-up on the LH Side
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 27-84-69-000-801
(a) Do the job set-up as specify in the removal of the slat tracks No. 5 thru 16, refer to
AMM Task 27-84-69-000-801.
(3) Subtask 575047-941-404-001 - Job Set-up on the RH Side
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 27-84-69-000-801
(a) Do the job set-up as specify in the removal of the slat tracks No. 5 thru 16, refer to
AMM Task 27-84-69-000-801.
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 49
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 54

@A340-500/600
SERVICE BULLETIN
C. PROCEDURE
(1) Subtask 575047-960-401-001 - Depending on the Inspection Results, Replace the
Slat Track No. 10 on the LH Side
Work Zones and Access Panels
Zone
 Access/Work location
522
Manpower Resources
Manhours
 3.00
Minimum number of person
 1
Subtask elapsed time
 3.00
Skills
 AIRFRAME
Material necessary to do the job
Component COMPB02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
11
 NSA5059C12
 1
 NUT
12
 NSA5059C10
 2
 NUT
16
 MS24665-376
 3
 PIN
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
NOTE
: The components listed above are only necessary if the slat track No. 10
is replaced. The quantity of these items are to be ordered as required.
Component COMPB03
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
19
 F5746412700200
 1
 TRACK
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
NOTE
: The components listed above are only necessary if the slat track No. 10
is replaced. The quantity of these items are to be ordered as required.
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Mineral Base Lubricating Oil
- General and Water-Disp
03BDB9
 As required
Synthetic Oil Base Grease -
General Purpose Clay Th
03GBB1
 As required
Coating - Flexible Structure
 04QAB2
 As required
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 50
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 55

@A340-500/600
SERVICE BULLETIN
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Polysulfide Sealant - Fuel
Tank Brushable
06ABA1
 As required
References
Aircraft Maintenance Manual (AMM)
 Task 20-21-11-911-801
Task 27-84-69-000-801
Task 27-84-69-400-801
Structural Repair Manual (SRM)
 51-24-00
51-40-00
51-42-00
51-43-00
51-75-12
Fig. A-UBIAA
Replacement of the Slat Track No. 10
on the LH Side
Sheet 01
(a) Replace the slat track No. 10 on the LH side:
1
 Remove the link parts between the slat 4 and the slat track No. 10:
Refer to Fig. A-UBIAA
In accordance with SRM 51-42-00
1 Bolt Item (1) Retain
1 Bolt Item (2) Retain
1 Bolt Item (4) Retain
1 Bolt Item (10) Retain
1 Bush Item (3) Retain
1 Locking Plate Item (5) Retain
1 Link Outboard Item (6) Retain
1 Link Inboard Item (8) Retain
1 Link Plate Outboard Item (14) Retain
1 Link Plate Inboard Item (15) Retain
3 Pin-Cotter Item (16) Discard
2 Washer Item (9) Retain
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 51
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 56

@A340-500/600
SERVICE BULLETIN
1 Washer Item (17) Retain
1 Nut Item (7) Retain
2 Nut Item (12) Discard
1 Nut Item (11) Discard
NOTE
: If you intend to accomplish this Repair Task during the same
layover period as the associated Inspection, some items are already
removed.
2
 Remove the slat track No. 10, refer to AMM Task 27-84-69-000-801:
Refer to Fig. A-UBIAA
1 Track Assy-No 10 Item (19) Discard
3
 Install the new slat track No. 10, refer to AMM Task 27-84-69-400-801:
Refer to Fig. A-UBIAA
1 Track Assy-No 10 F5746412700200 Item 19
4
 Install the link parts between the slat 4 and the slat track No. 10:
a
 Protect temporarily the unpainted areas of the track with:
Refer to Fig. A-UBIAA
Mineral Base
Lubricating Oil -
General and Water-
Disp
03BDB9 As required
b
 Install the link plates:
In accordance with SRM 51-40-00, SRM 51-42-00 and SRM 51-43-00
Refer to AMM Task 20-21-11-911-801
Refer to Fig. A-UBIAA
1 Link Plate Outboard Item (14) Retained at
removal
1 Link Plate Inboard Item (15) Retained at
removal
1 Bolt Item (1) Retained at
removal
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 52
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 57

@A340-500/600
SERVICE BULLETIN
1 Bolt Item (10) Retained at
removal
1 Washer Item (9) Retained at
removal
1 Washer Item (17) Retained at
removal
1 Nut NSA5059C12 Item 11
Tigthen the nut to a torque value comprised between 4.60 m.daN and
7.60 m.daN (407.135 lbf.in. and 672.656 lbf.in.).
1 Nut NSA5059C10 Item 12
Tigthen the nut to a torque value comprised between 3.40 m.daN and
4.80 m.daN (300.926 lbf.in. and 424.835 lbf.in.).
2 Pin-Cotter MS24665-376 Item 16
Lubricate the pins with:
Synthetic Oil Base
Grease - General
Purpose Clay Th
03GBB1 As required
Overcoat the bolts and nuts with:
In accordance with SRM 51-24-00
Polysulfide Sealant
- Fuel Tank
Brushable
06ABA1 As required
Protect the fastener heads with:
In accordance with SRM 51-75-12
Coating - Flexible
Structure
04QAB2 As required
c
 Install the link parts:
In accordance with SRM 51-40-00, SRM 51-42-00 and SRM 51-43-00
Refer to AMM Task 20-21-11-911-801
Refer to Fig. A-UBIAA
1 Bolt Item (2) Retained at
removal
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 53
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 58

@A340-500/600
SERVICE BULLETIN
1 Bolt Item (4) Retained at
removal
1 Bush Item (3) Retained at
removal
1 Locking Plate Item (5) Retained at
removal
1 Link Outboard Item (6) Retained at
removal
1 Link Inboard Item (8) Retained at
removal
1 Washer Item (9) Retained at
removal
1 Nut Item (7) Retained at
removal
1 Nut NSA5059C10 Item 12
Tigthen the nut to a torque value comprised between 3.40 m.daN and
4.80 m.daN (300.926 lbf.in. and 424.835 lbf.in.).
1 Pin-Cotter MS24665-376 Item 16
Lubricate the pins with:
Synthetic Oil Base
Grease - General
Purpose Clay Th
03GBB1 As required
Overcoat the bolts and nuts with:
In accordance with SRM 51-24-00
Polysulfide Sealant
- Fuel Tank
Brushable
06ABA1 As required
Protect the fastener heads with:
In accordance with SRM 51-75-12
Coating - Flexible
Structure
04QAB2 As required
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 54
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 59

@A340-500/600
SERVICE BULLETIN
(2) Subtask 575047-960-402-001 - Depending on the Inspection Results, Replace the
Slat Track No. 10 on the RH Side
Work Zones and Access Panels
Zone
 Access/Work location
622
Manpower Resources
Manhours
 3.00
Minimum number of person
 1
Subtask elapsed time
 3.00
Skills
 AIRFRAME
Material necessary to do the job
Component COMPB02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
11
 NSA5059C12
 1
 NUT
12
 NSA5059C10
 2
 NUT
16
 MS24665-376
 3
 PIN
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
NOTE
: The components listed above are only necessary if the slat track No. 10
is replaced. The quantity of these items are to be ordered as required.
Component COMPB03
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
19
 F5746412700200
 1
 TRACK
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
NOTE
: The components listed above are only necessary if the slat track No. 10
is replaced. The quantity of these items are to be ordered as required.
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Mineral Base Lubricating Oil
- General and Water-Disp
03BDB9
 As required
Synthetic Oil Base Grease -
General Purpose Clay Th
03GBB1
 As required
Coating - Flexible Structure
 04QAB2
 As required
Polysulfide Sealant - Fuel
Tank Brushable
06ABA1
 As required
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 55
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 60

@A340-500/600
SERVICE BULLETIN
References
Aircraft Maintenance Manual (AMM)
 Task 20-21-11-911-801
Task 27-84-69-000-801
Task 27-84-69-400-801
Structural Repair Manual (SRM)
 51-24-00
51-40-00
51-42-00
51-43-00
51-75-12
Fig. A-UBJAA
Replacement of the Slat Track No. 10
on the RH Side
Sheet 01
(a) Replace the slat track No. 10 on the RH side:
1
 Remove the link parts between the slat 4 and the slat track No. 10:
Refer to Fig. A-UBJAA
In accordance with SRM 51-42-00
1 Bolt Item (1) Retain
1 Bolt Item (2) Retain
1 Bolt Item (4) Retain
1 Bolt Item (10) Retain
1 Bush Item (3) Retain
1 Locking Plate Item (5) Retain
1 Link Outboard Item (6) Retain
1 Link Inboard Item (8) Retain
1 Link Plate Outboard Item (14) Retain
1 Link Plate Inboard Item (15) Retain
3 Pin-Cotter Item (16) Discard
2 Washer Item (9) Retain
1 Washer Item (17) Retain
1 Nut Item (7) Retain
DATE: Nov 12/18 SERVICE BULLETIN No.: A340-57-5047
REVISION No.: 00 - Nov 12/18 Page: 56
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

The text continues at https://openairdocs.org/service-documents/airbus/a340-57-5047/file/cea5cc813f56.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
