# Airbus Service Bulletin A350-25-P138

Copy: No revision named ("SB A350-25-P138"), 41 pages: PDF https://openairdocs.org/files/sha256/01/17/0117084d0e0c578fef58ea21f4ba029fa40463acf73e98ddf3f6f0ed398874d3; text https://openairdocs.org/service-documents/airbus/a350-25-p138/file/0117084d0e0c.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2019-0672, the docket of AD 2019-17-04. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A350-25-P138
- Page: https://openairdocs.org/service-documents/airbus/a350-25-p138

## Text (41 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2019-0672, the docket of AD 2019-17-04. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

A350
SERVICE BULLETIN
REV 00 Jan 25/19 A350-25-P138
Page 1
CONF ALL
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
 
The content of this document is the property of Airbus.
It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may information
contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of the
copyright. Requests for reproduction of any data in this document and the media authorized for it must
be addressed to Airbus.
MANDATORY MANDATORY MANDATORY
ATA SYSTEM: 25
TITLE: EQUIPMENT/FURNISHINGS - ANCILLARY EQUIPMENT - INSPECTION -
BABY BASSINET INSERTS LOOSE ON PARTITIONS
MODIFICATION No.:
None

### Page 2

A350
SERVICE BULLETIN
SUMMARY
REV 00 Jan 25/19 A350-25-P138
Page 2
ATA SYSTEM: 25
TITLE: EQUIPMENT/FURNISHINGS - ANCILLARY EQUIPMENT - INSPECTION -
BABY BASSINET INSERTS LOOSE ON PARTITIONS
SUMMARY
This summary is for information only and is not approved for modification of the aircraft.
A. MODIFICATIONS
CONF 001
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 002
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 003
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 004
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF ALL
B. REASON

### Page 3

A350
SERVICE BULLETIN
SUMMARY
REV 00 Jan 25/19 A350-25-P138
Page 3
(1) History
It has been reported by operators that baby bassinet inserts installed on partitions
may get loose. Further investigation identified self securing fixation device not applied
on baby bassinet inserts on partitions. This condition, if not detected and corrected,
could lead to baby bassinet detachment in case of a used bassinet.
(2) Objective/Action
This Service Bulletin is published to inspect the affected partitions for any missing
inserts for the baby bassinet installation. The correct tightness of all baby bassinet
inserts will also be inspected with this Service Bulletin.
(3) Advantages
The accomplishment of this Service Bulletin will detect any missing or loose baby
bassinet inserts and will avoid any possible bassinet detachment from the partition.
(4) Operational/Maintenance Consequences
None
C. GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE MANDATORY COST SAVING NO
A/C OPERATION
AFFECTED
NO VENDOR SB NO
CANCELS INSPECTION SB NO ETOPS AFFECTED NO
PAX COMFORT AFFECTED NO POTENTIAL AD YES
RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO
LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO
NOTE: Service Bulletin must be accomplished.
D. MAINTENANCE CONFIGURATION
CONF 001
No specific aircraft maintenance configuration required.
CONF 002
No specific aircraft maintenance configuration required.
CONF 003
No specific aircraft maintenance configuration required.
CONF 004
No specific aircraft maintenance configuration required.
CONF ALL
E. MATERIAL PRICE INFORMATION
CONF 001
(1) Inspection of Baby Bassinet Inserts on Partitions
(a) T ask set A350-A-25-XX-P138-01000-93BA-A Inspection of Baby Bassinet Inserts
on Partitions
No material
CONF 002

### Page 4

A350
SERVICE BULLETIN
SUMMARY
REV 00 Jan 25/19 A350-25-P138
Page 4
(1) Inspection of Baby Bassinet Inserts on Partitions
(a) T ask set A350-A-25-XX-P138-01000-93BA-A Inspection of Baby Bassinet Inserts
on Partitions
No material
CONF 003
(1) Inspection of Baby Bassinet Inserts on Partitions
(a) T ask set A350-A-25-XX-P138-01000-93BA-A Inspection of Baby Bassinet Inserts
on Partitions
No material
CONF 004
(1) Inspection of Baby Bassinet Inserts on Partitions
(a) T ask set A350-A-25-XX-P138-01000-93BA-A Inspection of Baby Bassinet Inserts
on Partitions
No material
CONF ALL
F. APPLICABILITY
This Service Bulletin is applicable to this (these) operator(s):
CAL DLH FWI HVN
G. CONCURRENT REQUIREMENTS
None
H. NATURE OF THE WORK
CONF 001
(1) Inspection of Baby Bassinet Inserts on Partitions
(a) T ask set A350-A-25-XX-P138-01000-93BA-A Inspection of Baby Bassinet Inserts
on Partitions
AIRCRAFT NO
EQUIPMENT YES
CONF 002
(1) Inspection of Baby Bassinet Inserts on Partitions
(a) T ask set A350-A-25-XX-P138-01000-93BA-A Inspection of Baby Bassinet Inserts
on Partitions
AIRCRAFT NO
EQUIPMENT YES
CONF 003
(1) Inspection of Baby Bassinet Inserts on Partitions
(a) T ask set A350-A-25-XX-P138-01000-93BA-A Inspection of Baby Bassinet Inserts
on Partitions
AIRCRAFT NO
EQUIPMENT YES
CONF 004

### Page 5

A350
SERVICE BULLETIN
SUMMARY
REV 00 Jan 25/19 A350-25-P138
Page 5
(1) Inspection of Baby Bassinet Inserts on Partitions
(a) T ask set A350-A-25-XX-P138-01000-93BA-A Inspection of Baby Bassinet Inserts
on Partitions
AIRCRAFT NO
EQUIPMENT YES
CONF ALL
I. MANPOWER
CONF 001
(1) Inspection of Baby Bassinet Inserts on Partitions
(a) T ask set A350-A-25-XX-P138-01000-93BA-A Inspection of Baby Bassinet Inserts
on Partitions
MANPOWER
TOTAL MAN-HOURS 1.50 h
ELAPSED TIME (HOURS) 1.50 h
CONF 002
(1) Inspection of Baby Bassinet Inserts on Partitions
(a) T ask set A350-A-25-XX-P138-01000-93BA-A Inspection of Baby Bassinet Inserts
on Partitions
MANPOWER
TOTAL MAN-HOURS 2.50 h
ELAPSED TIME (HOURS) 2.50 h
CONF 003
(1) Inspection of Baby Bassinet Inserts on Partitions
(a) T ask set A350-A-25-XX-P138-01000-93BA-A Inspection of Baby Bassinet Inserts
on Partitions
MANPOWER
TOTAL MAN-HOURS 2.50 h
ELAPSED TIME (HOURS) 2.50 h
CONF 004
(1) Inspection of Baby Bassinet Inserts on Partitions
(a) T ask set A350-A-25-XX-P138-01000-93BA-A Inspection of Baby Bassinet Inserts
on Partitions
MANPOWER
TOTAL MAN-HOURS 1.00 h
ELAPSED TIME (HOURS) 1.00 h

### Page 6

A350
SERVICE BULLETIN
SUMMARY
Figure ICN-A350-A-25XXP138-A-FAPE3-04GEN-A-001-01 SHEET 1/1
REV 00 Jan 25/19 A350-25-P138General overview - HVN
Page 6
CONF ALL
J. GENERAL OVERVIEW
CONF 001
FR47
FR34
PAX DOOR 2
FR46
Z250
A
A
5050ME165
NOTE:
PARTITION TO BE INSPECTED01
01
ICN-A350-A-25XXP138-A-FAPE3-04GEN-A-001-01

### Page 7

A350
SERVICE BULLETIN
SUMMARY
Figure ICN-A350-A-25XXP138-A-FAPE3-04GEP-A-001-01 SHEET 1/1
REV 00 Jan 25/19 A350-25-P138General overview - CAL
Page 7
CONF 002
FR47
FR34
PAX DOOR 2
FR46
Z250
A
A
5050ME165
5050ME161
5050ME162
01
01
01
NOTE:
PARTITIONS TO BE INSPECTED01 ICN-A350-A-25XXP138-A-FAPE3-04GEP-A-001-01

### Page 8

A350
SERVICE BULLETIN
SUMMARY
Figure ICN-A350-A-25XXP138-A-FAPE3-04GEO-A-001-01 SHEET 1/1
REV 00 Jan 25/19 A350-25-P138General overview - DLH
Page 8
CONF 003
FR47
FR34
PAX DOOR 2
FR45
5050ME165
A
B
Z260
Z250
PAX DOOR 3
FR63
FR65
FR66
FR67
5040ME136
A
B
NOTE:
PARTITIONS TO BE INSPECTED01
01
01
01
ICN-A350-A-25XXP138-A-FAPE3-04GEO-A-001-01

### Page 9

A350
SERVICE BULLETIN
SUMMARY
Figure ICN-A350-A-25XXP138-A-FAPE3-04GEQ-A-001-01 SHEET 1/1
REV 00 Jan 25/19 A350-25-P138General overview - FWI
Page 9
CONF 004
A
Z230
A
5057ME155
FR27
FR26
FR38
PAX DOOR 2
01
NOTE:
PARTITION TO BE INSPECTED01 ICN-A350-A-25XXP138-A-FAPE3-04GEQ-A-001-01

### Page 10

A350
SERVICE BULLETIN
REV 00 Jan 25/19 A350-25-P138
Page 10
ATA SYSTEM: 25
TITLE: EQUIPMENT/FURNISHINGS - ANCILLARY EQUIPMENT - INSPECTION -
BABY BASSINET INSERTS LOOSE ON PARTITIONS
CONF ALL
1. PLANNING INFORMATION
A. APPLICABILITY
(1) Models
ON A/C 0049, 0056, 0057, 0066, 0067, 0073, 0074, 0080, 0082, 0086, 0087, 0092
350-941
CONF ALL
(2) Applicability by MSN
0049 0056 0057 0066 0067 0073 0074 0080 0082 0086 0087 0092
(3) MSN by configuration
CONF 001
MSN CONFIGURATION
0056 0067 0086 001
CONF 002
MSN CONFIGURATION
0049 0057 0066 0073 0092 002
CONF 003
MSN CONFIGURATION
0074 0080 0087 003
CONF 004
MSN CONFIGURATION
0082 004
CONF ALL
(4) Configuration definition
CONF 001
Configuration 001
CONF 001 is applicable for all HVN aircraft affected by this Service Bulletin
CONF 002
Configuration 002
CONF 002 is applicable for all CAL aircraft affected by this Service Bulletin
CONF 003
Configuration 003
CONF 003 is applicable for all DLH aircraft affected by this Service Bulletin
CONF 004

### Page 11

A350
SERVICE BULLETIN
REV 00 Jan 25/19 A350-25-P138
Page 11
Configuration 004
CONF 004 is applicable for all FWI aircraft affected by this Service Bulletin
CONF ALL
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
It has been reported by operators that baby bassinet inserts installed on partitions
may get loose. Further investigation identified self securing fixation device not applied
on baby bassinet inserts on partitions. This condition, if not detected and corrected,
could lead to baby bassinet detachment in case of a used bassinet.
(2) Objective/Action
This Service Bulletin is published to inspect the affected partitions for any missing
inserts for the baby bassinet installation. The correct tightness of all baby bassinet
inserts will also be inspected with this Service Bulletin.
(3) Advantages
The accomplishment of this Service Bulletin will detect any missing or loose baby
bassinet inserts and will avoid any possible bassinet detachment from the partition.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
T o accomplish this Service Bulletin it is necessary to:
(1) Inspection of Baby Bassinet Inserts on Partitions
(a) T ask set A350-A-25-XX-P138-01000-93BA-A Inspection of Baby Bassinet Inserts
on Partitions
CONF 001
1 Inspect the Baby Bassinet Inserts on Partitions
CONF 002
1 Inspect the Baby Bassinet Inserts on Partitions
CONF 003
1 Inspect the Baby Bassinet Inserts on Partitions
CONF 004
1 Inspect the Baby Bassinet Inserts on Partitions
CONF ALL
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
Accomplishment of this Service Bulletin must be done within 3 Months after the initial
issue date of the Service Bulletin. A grace period of 1 month is allowed.
This Service Bulletin has been classified Mandatory. It is expected that an
Airworthiness Directive (AD) published by the European Aviation Safety Agency (EASA)

### Page 12

A350
SERVICE BULLETIN
REV 00 Jan 25/19 A350-25-P138
Page 12
will be issued to confirm this classification. It is anticipated that the AD will confirm
the thresholds given but reference should be made to the AD for confirmation of the
mandated accomplishment timescale.
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organisation Approval No. EASA.21J.031.
If an aircraft listed in the applicability has a modification or repair embodied that is not
of AIRBUS origin, and which affects the content of this Service Bulletin, the operator
is responsible for obtaining approval by its airworthiness authority for any adaptation
necessary before incorporation of the Service Bulletin.
G. MANPOWER
CONF 001
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Inspection of Baby Bassinet Inserts on Partitions
(a) T ask set A350-A-25-XX-P138-01000-93BA-A Inspection of Baby Bassinet Inserts
on Partitions
PREPARATION
Job Set-up 0.25 h
PROCEDURE
Inspect the Baby Bassinet Inserts on Partitions 1.00 h
PREPARATION FOR TEST
None
TEST
None
CLOSE-UP
Close Up 0.25 h
TOTAL MAN-HOURS 1.50 h
ELAPSED TIME (HOURS) 1.50 h
CONF 002
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Inspection of Baby Bassinet Inserts on Partitions
(a) T ask set A350-A-25-XX-P138-01000-93BA-A Inspection of Baby Bassinet Inserts
on Partitions
PREPARATION
Job Set-up 0.25 h
PROCEDURE

### Page 13

A350
SERVICE BULLETIN
REV 00 Jan 25/19 A350-25-P138
Page 13
Inspect the Baby Bassinet Inserts on Partitions 2.00 h
PREPARATION FOR TEST
None
TEST
None
CLOSE-UP
Close Up 0.25 h
TOTAL MAN-HOURS 2.50 h
ELAPSED TIME (HOURS) 2.50 h
CONF 003
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Inspection of Baby Bassinet Inserts on Partitions
(a) T ask set A350-A-25-XX-P138-01000-93BA-A Inspection of Baby Bassinet Inserts
on Partitions
PREPARATION
Job Set-up 0.25 h
PROCEDURE
Inspect the Baby Bassinet Inserts on Partitions 2.00 h
PREPARATION FOR TEST
None
TEST
None
CLOSE-UP
Close Up 0.25 h
TOTAL MAN-HOURS 2.50 h
ELAPSED TIME (HOURS) 2.50 h
CONF 004
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Inspection of Baby Bassinet Inserts on Partitions
(a) T ask set A350-A-25-XX-P138-01000-93BA-A Inspection of Baby Bassinet Inserts
on Partitions
PREPARATION
Job Set-up 0.25 h
PROCEDURE

### Page 14

A350
SERVICE BULLETIN
REV 00 Jan 25/19 A350-25-P138
Page 14
Inspect the Baby Bassinet Inserts on Partitions 0.50 h
PREPARATION FOR TEST
None
TEST
None
CLOSE-UP
Close Up 0.25 h
TOTAL MAN-HOURS 1.00 h
ELAPSED TIME (HOURS) 1.00 h
CONF ALL
H. WEIGHT AND BALANCE
Not changed
I. ELECTRICAL LOAD DATA
Not changed
J. REFERENCES
CONF 001
(1) Inspection of Baby Bassinet Inserts on Partitions
(a) T ask set A350-A-25-XX-P138-01000-93BA-A Inspection of Baby Bassinet Inserts
on Partitions
ALL OPERATORS TRANSMISSION (AOT)
A25P011-17-01
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
IN SERVICE INFORMATION (ISI)
00.00.00179
MAINTENANCE PROCEDURE (MP)
A350-A-24-41-XX-00ZZZ-170Z-A
PROCESS AND MATERIAL SPECIFICATION (PMS)
01-05-72
CONF 002
(1) Inspection of Baby Bassinet Inserts on Partitions
(a) T ask set A350-A-25-XX-P138-01000-93BA-A Inspection of Baby Bassinet Inserts
on Partitions
ALL OPERATORS TRANSMISSION (AOT)
A25P011-17-01

### Page 15

A350
SERVICE BULLETIN
REV 00 Jan 25/19 A350-25-P138
Page 15
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
IN SERVICE INFORMATION (ISI)
00.00.00179
MAINTENANCE PROCEDURE (MP)
A350-A-24-41-XX-00ZZZ-170Z-A
PROCESS AND MATERIAL SPECIFICATION (PMS)
01-05-72
CONF 003
(1) Inspection of Baby Bassinet Inserts on Partitions
(a) T ask set A350-A-25-XX-P138-01000-93BA-A Inspection of Baby Bassinet Inserts
on Partitions
ALL OPERATORS TRANSMISSION (AOT)
A25P011-17-01
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
IN SERVICE INFORMATION (ISI)
00.00.00179
MAINTENANCE PROCEDURE (MP)
A350-A-24-41-XX-00ZZZ-170Z-A
PROCESS AND MATERIAL SPECIFICATION (PMS)
01-05-72
CONF 004
(1) Inspection of Baby Bassinet Inserts on Partitions
(a) T ask set A350-A-25-XX-P138-01000-93BA-A Inspection of Baby Bassinet Inserts
on Partitions
ALL OPERATORS TRANSMISSION (AOT)
A25P011-17-01
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A

### Page 16

A350
SERVICE BULLETIN
REV 00 Jan 25/19 A350-25-P138
Page 16
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
IN SERVICE INFORMATION (ISI)
00.00.00179
MAINTENANCE PROCEDURE (MP)
A350-A-24-41-XX-00ZZZ-170Z-A
PROCESS AND MATERIAL SPECIFICATION (PMS)
01-05-72
CONF ALL
K. PUBLICATION AFFECTED
None
L. INDUSTRY SUPPORT INFORMATION
This inspection will be monitored by AIRBUS.
For aircraft under warranty at Jan 01/19, AIRBUS will credit the man-hours indicated in this
Service Bulletin at the agreed in-house warranty labor rate for claims received no later than
90 days after completion of the last affected aircraft of your fleet, for the accomplishment of
this Service Bulletin before May 01/19 or within three months after the initial issue date of
the Service Bulletin.
For those aircraft in warranty at the time of such inspection with findings further to
inspection as per this Service Bulletin, AIRBUS will credit the man-hours indicated in this
Service Bulletin for corrections that are performed on aircraft in warranty at the time of
such correction. Credit will be at the agreed in-house warranty labor rate. Claims for labor
allowance should be received not later than 90 days after completion of the last affected
warranted aircraft.
Refer to DIEHL Aircabin GmbH at the address given below for the industry support terms of
the Vendor parts.
Diehl Aircabin GmbH
Am Flugplatz
D-88471 Laupheim
Germany
E-mail: support.technical-dac@diehl.com
Internet: http://www.diehl-aerospace.com

### Page 17

A350
SERVICE BULLETIN
REV 00 Jan 25/19 A350-25-P138
Page 17
2. MATERIAL INFORMATION
A. MATERIAL APPLICABILITY
CONF 001
Material for task set A350-A-25-XX-P138-01000-93BA-A Inspection of Baby
Bassinet Inserts on Partitions
MATERIAL QTY SEE NOTES
Referenced parts See SB
CONF 002
Material for task set A350-A-25-XX-P138-01000-93BA-A Inspection of Baby
Bassinet Inserts on Partitions
MATERIAL QTY SEE NOTES
Referenced parts See SB
CONF 003
Material for task set A350-A-25-XX-P138-01000-93BA-A Inspection of Baby
Bassinet Inserts on Partitions
MATERIAL QTY SEE NOTES
Referenced parts See SB
CONF 004
Material for task set A350-A-25-XX-P138-01000-93BA-A Inspection of Baby
Bassinet Inserts on Partitions
MATERIAL QTY SEE NOTES
Referenced parts See SB
CONF ALL
B. TOOLING
No tools
C. CONSUMABLES
No consumables
D. LIST OF NEW PARTS
CONF 001
Referenced parts for task set A350-A-25-XX-P138-01000-93BA-A Inspection of
Baby Bassinet Inserts on Partitions
NOTE: T o accomplish this Service Bulletin it is necessary to use the expendable parts and
consumable materials listed in the DIEHL Service Information Letter DAc/SIL-2017–001.
CONF 002
Referenced parts for task set A350-A-25-XX-P138-01000-93BA-A Inspection of
Baby Bassinet Inserts on Partitions
NOTE: T o accomplish this Service Bulletin it is necessary to use the expendable parts and
consumable materials listed in the DIEHL Service Information Letter DAc/SIL-2017–001.
CONF 003
Referenced parts for task set A350-A-25-XX-P138-01000-93BA-A Inspection of
Baby Bassinet Inserts on Partitions

### Page 18

A350
SERVICE BULLETIN
REV 00 Jan 25/19 A350-25-P138
Page 18
NOTE: T o accomplish this Service Bulletin it is necessary to use the expendable parts and
consumable materials listed in the DIEHL Service Information Letter DAc/SIL-2017–001.
CONF 004
Referenced parts for task set A350-A-25-XX-P138-01000-93BA-A Inspection of
Baby Bassinet Inserts on Partitions
NOTE: T o accomplish this Service Bulletin it is necessary to use the expendable parts and
consumable materials listed in the DIEHL Service Information Letter DAc/SIL-2017–001.
CONF ALL
E. LIST OF EXISTING PARTS
No parts

### Page 19

A350
SERVICE BULLETIN
REV 00 Jan 25/19 A350-25-P138
Page 19
3. ACCOMPLISHMENT INSTRUCTIONS
Task set A350-A-25-XX-P138-01000-93BA-A
Inspection of Baby Bassinet Inserts on Partitions
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL
WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND MECHANICALLY
SERVICEABLE). WHEN YOU DO A MAINTENANCE WORK, REPAIRS OR
MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND
THE WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND
DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO Ref. ESP A350-A-20-55-
XX-01ZZZ-042Z-A.
NOTE: The accomplishment instructions of this Service Bulletin include procedures given in
other documents or in other sections of the Service Bulletin. When the words “refer to”
are used and the operator has a procedure accepted by the local authority he belongs to,
the accepted alternative procedure can be used. When the words “in accordance with”
are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service Bulletin.
Operators can therefore, as deemed necessary, omit or add access and/or close-up steps
to add flexibility to their maintenance operations as long as the technical intent of the
Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms. Refer
to paragraph 1.J., References, for the definition of acronyms.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance necessary
to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, including RC paragraph contained herein, contact
AIRBUS for further instructions and approval.
NOTE: This Service Bulletin is classified mandatory or expected to be classified mandatory by
an Airworthiness Directive (AD). The paragraphs 3.C. and 3.E. in these accomplishment
instructions are Required for Compliance (RC) and must be done to comply with the AD.
T o allow more flexibility, the rule "refer to" and "in accordance with" will apply to these
paragraphs 3.C. and 3.E. Other paragraphs are recommended and may be deviated from,
done as part of other actions or done with accepted methods different from those given
in the Service Bulletin, as long as the RC paragraphs can be done and the aircraft can be
put back into a serviceable condition.
NOTE: The purpose of flowcharts is to supplement the information given in the Procedure and
Compliance paragraphs and not to serve as the primary source for tasks or compliance
times given in this Service Bulletin.
A. TASK SET ASSOCIATED INFORMATION
Task Manpower

### Page 20

A350
SERVICE BULLETIN
REV 00 Jan 25/19 A350-25-P138
Page 20
CONF 001
TOTAL MAN-HOURS 1.50 h
CONF 002
TOTAL MAN-HOURS 2.50 h
CONF 003
TOTAL MAN-HOURS 2.50 h
CONF 004
TOTAL MAN-HOURS 1.00 h
CONF 001
ELAPSED TIME (HOURS) 1.50 h
CONF 002
ELAPSED TIME (HOURS) 2.50 h
CONF 003
ELAPSED TIME (HOURS) 2.50 h
CONF 004
ELAPSED TIME (HOURS) 1.00 h
CONF ALL
B. PREPARATION
(1) Task A350-A-25-XX-P138-01001-540A-A - Job Set-up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 0.25 h
Minimum Number of person 1
Elapsed Time 0.25 h
Skills Utility
Referenced Information
Manuals/Drawings References/Sheets
INTRO A350-A-00-61-04-11ZZZ-018Z-D
MP A350-A-24-41-XX-00ZZZ-170Z-A
Procedure
NOTE: For the basic Aircraft configuration, refer to Ref. INTRO A350-
A-00-61-04-11ZZZ-018Z-D “Introduction” .
(a) Make sure that the aircraft is electrically grounded, refer to Ref. MP A350-
A-24-41-XX-00ZZZ-170Z-A.
C. PROCEDURE
CONF 001
(1) Task A350-A-25-XX-P138-01001-346A-A - Inspect the Baby Bassinet Inserts
on Partitions
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
250 Work location From Frame 46 to Frame 47
Manpower/Resources/Skills
Man-hours 1.00 h

### Page 21

A350
SERVICE BULLETIN
REV 00 Jan 25/19 A350-25-P138
Page 21
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Cabin
Referenced Information
Manuals/Drawings References/Sheets
ISI 00.00.00179
PMS 01-05-72
Procedure
Ref. Fig. Flow Chart
Ref. Fig. Location
(a) Standard Practices
1 For the general installation of inserts, refer to Ref. PMS 01-05-72.
(b) Do a Special Detailed Inspection of the Partition for missing Inserts.
1 If there are one or more missing inserts:
a Replace the missing inserts in accordance with Step 02 thru 05 of the
DIEHL Service Information Letter DAc/SIL-2017–001.
b Accomplish the DIEHL Service Information Letter DAc/SIL-2017–001
on all other inserts.
c Report the findings to AIRBUS, refer to Ref. Fig. Inspection report.
NOTE: Send the completed Inspection Report sheet in accordance
with Ref. ISI 00.00.00179.
NOTE: Sending the Inspection Report sheet is not Required for
Compliance.
d No further action in accordance with this Service Bulletin
2 If there are no missing inserts:
a Accomplish the DIEHL Service Information Letter DAc/SIL-2017–001
on all inserts.
b No further action in accordance with this Service Bulletin

### Page 22

A350
SERVICE BULLETIN
Figure ICN-A350-A-25XXP138-A-FAPE3-04H7Q-A-002-01 SHEET 1/1
REV 00 Jan 25/19 A350-25-P138Flow Chart
Page 22
CONF 001
NO FURTHER ACTION IN
ACCORDANCE WITH THIS
SERVICE BULLETIN
NOTE:
THE PURPOSE OF FLOWCHARTS IS TO SUPPLEMENT THE
INFORMATION GIVEN IN THE PROCEDURE AND COMPLIANCE
PARAGRAPHS AND NOT TO SERVE AS THE PRIMARY SOURCE
FOR TASKS OR COMPLIANCE TIMES GIVEN IN
THIS SERVICE BULLETIN.
FOR THE COMPLIANCE TIMES, REFER TO THE
ACCOMPLISHMENT TIMESCALE PARA 1.E.(2).
NOYES
DO A SPECIAL DETAILED
INSPECTION FOR MISSING
ONE OR MORE
INSERTS MISSING?
INSERTS
ACCOMPLISH THE VENDOR SERVICE
ON ALL INSERTS
INFORMATION LETTER
STEP 01 THRU 05
REPLACE MISSING INSERTS
I.A.W. THE VENDOR SERVICE
INFORMATION LETTER
STEP 02 THRU 05
REPORT FINDINGS
TO AIRBUS
ACCOMPLISH THE VENDOR SERVICE
INFORMATION LETTER
STEP 01 THRU 05
ON ALL OTHER INSERTS
ICN-A350-A-25XXP138-A-FAPE3-04H7Q-A-002-01

### Page 23

A350
SERVICE BULLETIN
Figure ICN-A350-A-25XXP138-A-FAPE3-04H7P-A-001-01 SHEET 1/1
REV 00 Jan 25/19 A350-25-P138Location - HVN
Page 23
CONF 001
FR47
FR34
PAX DOOR 2
FR46
Z250
A
5050ME165
B
INSERT LOCATION
B
A
VW30UCF40006000
ICN-A350-A-25XXP138-A-FAPE3-04H7P-A-001-01

### Page 24

A350
SERVICE BULLETIN
Figure ICN-A350-A-25XXP138-A-FAPE3-04H2B-A-001-01 SHEET 1/1
REV 00 Jan 25/19 A350-25-P138Inspection report
Page 24
CONF 001
INSPECTION REPORT
SERVICE BULLETIN No. :
A/C MSN :
FLIGHT CYCLES :
FLIGHT HOURS :
A350-25-P138
DATE OF INSPECTION :
INSPECTION METHOD : SPECIAL DETAILED
INSPECTION
PARTITION
PART NUMBER
UPLOAD THIS INSPECTION REPORT
IN ACCORDANCE WITH ISI-00-00-00179
USING THE ONLINE REPORTING APPLICATION
IN AIRBUSWORLD
FIN
NUMBER
No. OF MISSING
INSERTS REPLACED
NOTE:
NONE, ONE, TWO, THREE OR FOUR01
01
ICN-A350-A-25XXP138-A-FAPE3-04H2B-A-001-01

### Page 25

A350
SERVICE BULLETIN
REV 00 Jan 25/19 A350-25-P138
Page 25
CONF 002
(1) Task A350-A-25-XX-P138-01002-346A-A - Inspect the Baby Bassinet Inserts
on Partitions
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
250 Work location From Frame 46 to Frame 47
Manpower/Resources/Skills
Man-hours 2.00 h
Minimum Number of person 1
Elapsed Time 2.00 h
Skills Cabin
Referenced Information
Manuals/Drawings References/Sheets
ISI 00.00.00179
PMS 01-05-72
Procedure
Ref. Fig. Flow Chart
Ref. Fig. Location
(a) Standard Practices
1 For the general installation of inserts, refer to Ref. PMS 01-05-72.
(b) Do a Special Detailed Inspection of the Partition for missing Inserts.
1 If there are one or more missing inserts:
a Replace the missing inserts in accordance with Step 02 thru 05 of the
DIEHL Service Information Letter DAc/SIL-2017–001.
b Accomplish the DIEHL Service Information Letter DAc/SIL-2017–001
on all other inserts.
c Report the findings to AIRBUS, refer to Ref. Fig. Inspection report.
NOTE: Send the completed Inspection Report sheet in accordance
with Ref. ISI 00.00.00179.
NOTE: Sending the Inspection Report sheet is not Required for
Compliance.
d No further action in accordance with this Service Bulletin
2 If there are no missing inserts:
a Accomplish the DIEHL Service Information Letter DAc/SIL-2017–001
on all inserts.
b No further action in accordance with this Service Bulletin

### Page 26

A350
SERVICE BULLETIN
Figure ICN-A350-A-25XXP138-A-FAPE3-04H7Q-A-002-01 SHEET 1/1
REV 00 Jan 25/19 A350-25-P138Flow Chart
Page 26
CONF 002
NO FURTHER ACTION IN
ACCORDANCE WITH THIS
SERVICE BULLETIN
NOTE:
THE PURPOSE OF FLOWCHARTS IS TO SUPPLEMENT THE
INFORMATION GIVEN IN THE PROCEDURE AND COMPLIANCE
PARAGRAPHS AND NOT TO SERVE AS THE PRIMARY SOURCE
FOR TASKS OR COMPLIANCE TIMES GIVEN IN
THIS SERVICE BULLETIN.
FOR THE COMPLIANCE TIMES, REFER TO THE
ACCOMPLISHMENT TIMESCALE PARA 1.E.(2).
NOYES
DO A SPECIAL DETAILED
INSPECTION FOR MISSING
ONE OR MORE
INSERTS MISSING?
INSERTS
ACCOMPLISH THE VENDOR SERVICE
ON ALL INSERTS
INFORMATION LETTER
STEP 01 THRU 05
REPLACE MISSING INSERTS
I.A.W. THE VENDOR SERVICE
INFORMATION LETTER
STEP 02 THRU 05
REPORT FINDINGS
TO AIRBUS
ACCOMPLISH THE VENDOR SERVICE
INFORMATION LETTER
STEP 01 THRU 05
ON ALL OTHER INSERTS
ICN-A350-A-25XXP138-A-FAPE3-04H7Q-A-002-01

### Page 27

A350
SERVICE BULLETIN
Figure ICN-A350-A-25XXP138-A-FAPE3-04H7T-A-001-01 SHEET 1/2
REV 00 Jan 25/19 A350-25-P138Location - CAL
Page 27
CONF 002
FR47
FR34
PAX DOOR 2
FR46
A
B
A
5050ME162
5050ME161
B
C
D
C
INSERT LOCATION
Z250
VW30ULF20003000
VW30ULF20002000
ICN-A350-A-25XXP138-A-FAPE3-04H7T-A-001-01

### Page 28

A350
SERVICE BULLETIN
Figure ICN-A350-A-25XXP138-A-FAPE3-04H9W-A-001-01 SHEET 2/2
REV 00 Jan 25/19 A350-25-P138Location - CAL
Page 28
CONF 002
INSERT LOCATION
VW30UCF30000000
D
5050ME165
ICN-A350-A-25XXP138-A-FAPE3-04H9W-A-001-01

### Page 29

A350
SERVICE BULLETIN
Figure ICN-A350-A-25XXP138-A-FAPE3-04H2B-A-001-01 SHEET 1/1
REV 00 Jan 25/19 A350-25-P138Inspection report
Page 29
CONF 002
INSPECTION REPORT
SERVICE BULLETIN No. :
A/C MSN :
FLIGHT CYCLES :
FLIGHT HOURS :
A350-25-P138
DATE OF INSPECTION :
INSPECTION METHOD : SPECIAL DETAILED
INSPECTION
PARTITION
PART NUMBER
UPLOAD THIS INSPECTION REPORT
IN ACCORDANCE WITH ISI-00-00-00179
USING THE ONLINE REPORTING APPLICATION
IN AIRBUSWORLD
FIN
NUMBER
No. OF MISSING
INSERTS REPLACED
NOTE:
NONE, ONE, TWO, THREE OR FOUR01
01
ICN-A350-A-25XXP138-A-FAPE3-04H2B-A-001-01

### Page 30

A350
SERVICE BULLETIN
REV 00 Jan 25/19 A350-25-P138
Page 30
CONF 003
(1) Task A350-A-25-XX-P138-01003-346A-A - Inspect the Baby Bassinet Inserts
on Partitions
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
250 Work location From Frame 44 to Frame 45
260 Work location From Frame 65 to Frame 67
Manpower/Resources/Skills
Man-hours 2.00 h
Minimum Number of person 1
Elapsed Time 2.00 h
Skills Cabin
Referenced Information
Manuals/Drawings References/Sheets
ISI 00.00.00179
PMS 01-05-72
Procedure
Ref. Fig. Flow Chart
Ref. Fig. Location
(a) Standard Practices
1 For the general installation of inserts, refer to Ref. PMS 01-05-72.
(b) Do a Special Detailed Inspection of the Partition for missing Inserts.
1 If there are one or more missing inserts:
a Replace the missing inserts in accordance with Step 02 thru 05 of the
DIEHL Service Information Letter DAc/SIL-2017–001.
b Accomplish the DIEHL Service Information Letter DAc/SIL-2017–001
on all other inserts.
c Report the findings to AIRBUS, refer to Ref. Fig. Inspection report.
NOTE: Send the completed Inspection Report sheet in accordance
with Ref. ISI 00.00.00179.
NOTE: Sending the Inspection Report sheet is not Required for
Compliance.
d No further action in accordance with this Service Bulletin
2 If there are no missing inserts:
a Accomplish the DIEHL Service Information Letter DAc/SIL-2017–001
on all inserts.
b No further action in accordance with this Service Bulletin

### Page 31

A350
SERVICE BULLETIN
Figure ICN-A350-A-25XXP138-A-FAPE3-04H7Q-A-002-01 SHEET 1/1
REV 00 Jan 25/19 A350-25-P138Flow Chart
Page 31
CONF 003
NO FURTHER ACTION IN
ACCORDANCE WITH THIS
SERVICE BULLETIN
NOTE:
THE PURPOSE OF FLOWCHARTS IS TO SUPPLEMENT THE
INFORMATION GIVEN IN THE PROCEDURE AND COMPLIANCE
PARAGRAPHS AND NOT TO SERVE AS THE PRIMARY SOURCE
FOR TASKS OR COMPLIANCE TIMES GIVEN IN
THIS SERVICE BULLETIN.
FOR THE COMPLIANCE TIMES, REFER TO THE
ACCOMPLISHMENT TIMESCALE PARA 1.E.(2).
NOYES
DO A SPECIAL DETAILED
INSPECTION FOR MISSING
ONE OR MORE
INSERTS MISSING?
INSERTS
ACCOMPLISH THE VENDOR SERVICE
ON ALL INSERTS
INFORMATION LETTER
STEP 01 THRU 05
REPLACE MISSING INSERTS
I.A.W. THE VENDOR SERVICE
INFORMATION LETTER
STEP 02 THRU 05
REPORT FINDINGS
TO AIRBUS
ACCOMPLISH THE VENDOR SERVICE
INFORMATION LETTER
STEP 01 THRU 05
ON ALL OTHER INSERTS
ICN-A350-A-25XXP138-A-FAPE3-04H7Q-A-002-01

### Page 32

A350
SERVICE BULLETIN
Figure ICN-A350-A-25XXP138-A-FAPE3-04H7R-A-001-01 SHEET 1/2
REV 00 Jan 25/19 A350-25-P138Location - DLH
Page 32
CONF 003
FR47
FR34
PAX DOOR 2
FR45
A
C
B
INSERT LOCATION
5057ME165
B
Z260
Z250
A
VW30SCF20000000
ICN-A350-A-25XXP138-A-FAPE3-04H7R-A-001-01

### Page 33

A350
SERVICE BULLETIN
Figure ICN-A350-A-25XXP138-A-FAPE3-04H7S-A-001-01 SHEET 2/2
REV 00 Jan 25/19 A350-25-P138Location - DLH
Page 33
CONF 003
PAX DOOR 3
FR63
FR65
FR66
FR67
D
C
5040ME136
D
INSERT LOCATION
VW30FCF20004000
ICN-A350-A-25XXP138-A-FAPE3-04H7S-A-001-01

### Page 34

A350
SERVICE BULLETIN
Figure ICN-A350-A-25XXP138-A-FAPE3-04H2B-A-001-01 SHEET 1/1
REV 00 Jan 25/19 A350-25-P138Inspection report
Page 34
CONF 003
INSPECTION REPORT
SERVICE BULLETIN No. :
A/C MSN :
FLIGHT CYCLES :
FLIGHT HOURS :
A350-25-P138
DATE OF INSPECTION :
INSPECTION METHOD : SPECIAL DETAILED
INSPECTION
PARTITION
PART NUMBER
UPLOAD THIS INSPECTION REPORT
IN ACCORDANCE WITH ISI-00-00-00179
USING THE ONLINE REPORTING APPLICATION
IN AIRBUSWORLD
FIN
NUMBER
No. OF MISSING
INSERTS REPLACED
NOTE:
NONE, ONE, TWO, THREE OR FOUR01
01
ICN-A350-A-25XXP138-A-FAPE3-04H2B-A-001-01

### Page 35

A350
SERVICE BULLETIN
REV 00 Jan 25/19 A350-25-P138
Page 35
CONF 004
(1) Task A350-A-25-XX-P138-01004-346A-A - Inspect the Baby Bassinet Inserts
on Partitions
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
230 Work location From Frame 26 to Frame 27
Manpower/Resources/Skills
Man-hours 0.50 h
Minimum Number of person 1
Elapsed Time 0.50 h
Skills Cabin
Referenced Information
Manuals/Drawings References/Sheets
ISI 00.00.00179
PMS 01-05-72
Procedure
Ref. Fig. Flow Chart
Ref. Fig. Location
(a) Standard Practices
1 For the general installation of inserts, refer to Ref. PMS 01-05-72.
(b) Do a Special Detailed Inspection of the Partition for missing Inserts.
1 If there are one or more missing inserts:
a Replace the missing inserts in accordance with Step 02 thru 05 of the
DIEHL Service Information Letter DAc/SIL-2017–001.
b Accomplish the DIEHL Service Information Letter DAc/SIL-2017–001
on all other inserts.
c Report the findings to AIRBUS, refer to Ref. Fig. Inspection report.
NOTE: Send the completed Inspection Report sheet in accordance
with Ref. ISI 00.00.00179.
NOTE: Sending the Inspection Report sheet is not Required for
Compliance.
d No further action in accordance with this Service Bulletin
2 If there are no missing inserts:
a Accomplish the DIEHL Service Information Letter DAc/SIL-2017–001
on all inserts.
b No further action in accordance with this Service Bulletin

### Page 36

A350
SERVICE BULLETIN
Figure ICN-A350-A-25XXP138-A-FAPE3-04H7Q-A-002-01 SHEET 1/1
REV 00 Jan 25/19 A350-25-P138Flow Chart
Page 36
CONF 004
NO FURTHER ACTION IN
ACCORDANCE WITH THIS
SERVICE BULLETIN
NOTE:
THE PURPOSE OF FLOWCHARTS IS TO SUPPLEMENT THE
INFORMATION GIVEN IN THE PROCEDURE AND COMPLIANCE
PARAGRAPHS AND NOT TO SERVE AS THE PRIMARY SOURCE
FOR TASKS OR COMPLIANCE TIMES GIVEN IN
THIS SERVICE BULLETIN.
FOR THE COMPLIANCE TIMES, REFER TO THE
ACCOMPLISHMENT TIMESCALE PARA 1.E.(2).
NOYES
DO A SPECIAL DETAILED
INSPECTION FOR MISSING
ONE OR MORE
INSERTS MISSING?
INSERTS
ACCOMPLISH THE VENDOR SERVICE
ON ALL INSERTS
INFORMATION LETTER
STEP 01 THRU 05
REPLACE MISSING INSERTS
I.A.W. THE VENDOR SERVICE
INFORMATION LETTER
STEP 02 THRU 05
REPORT FINDINGS
TO AIRBUS
ACCOMPLISH THE VENDOR SERVICE
INFORMATION LETTER
STEP 01 THRU 05
ON ALL OTHER INSERTS
ICN-A350-A-25XXP138-A-FAPE3-04H7Q-A-002-01

### Page 37

A350
SERVICE BULLETIN
Figure ICN-A350-A-25XXP138-A-FAPE3-04H72-A-001-01 SHEET 1/1
REV 00 Jan 25/19 A350-25-P138Location - FWI
Page 37
CONF 004
Z230
A
FR27
FR26
FR38
PAX DOOR 2
B
5057ME155
B
INSERT LOCATION
A
VW30UCF20000000
ICN-A350-A-25XXP138-A-FAPE3-04H72-A-001-01

### Page 38

A350
SERVICE BULLETIN
Figure ICN-A350-A-25XXP138-A-FAPE3-04H2B-A-001-01 SHEET 1/1
REV 00 Jan 25/19 A350-25-P138Inspection report
Page 38
CONF 004
INSPECTION REPORT
SERVICE BULLETIN No. :
A/C MSN :
FLIGHT CYCLES :
FLIGHT HOURS :
A350-25-P138
DATE OF INSPECTION :
INSPECTION METHOD : SPECIAL DETAILED
INSPECTION
PARTITION
PART NUMBER
UPLOAD THIS INSPECTION REPORT
IN ACCORDANCE WITH ISI-00-00-00179
USING THE ONLINE REPORTING APPLICATION
IN AIRBUSWORLD
FIN
NUMBER
No. OF MISSING
INSERTS REPLACED
NOTE:
NONE, ONE, TWO, THREE OR FOUR01
01
ICN-A350-A-25XXP138-A-FAPE3-04H2B-A-001-01

### Page 39

A350
SERVICE BULLETIN
REV 00 Jan 25/19 A350-25-P138
Page 39
CONF ALL
D. PREPARATION FOR TEST
None
E. TEST
None
F. CLOSE-UP
(1) Task A350-A-25-XX-P138-01001-740A-A - Close Up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 0.25 h
Minimum Number of person 1
Elapsed Time 0.25 h
Skills Utility
Procedure
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Put the aircraft back to its initial configuration.
G. ADMINISTRATIVE
(1) Task A350-A-25-XX-P138-01001-90AA-A - Administrative
Procedure
Confirm in the applicable aircraft records that you have completed all the work defined
in this Service Bulletin task set as required.

### Page 40

A350
SERVICE BULLETIN
APPENDIX
REV 00 Jan 25/19 A350-25-P138
Page 40
APPENDIX
A. REPORTING SHEET
TITLE: EQUIPMENT/FURNISHINGS - ANCILLARY EQUIPMENT - INSPECTION -
BABY BASSINET INSERTS LOOSE ON PARTITIONS
MODIFICATION No.:  
(1) SB Reporting status
This Service Bulletin will only be incorporated into affected customized Maintenance
and Flight Operations Products if it is duly reported to Airbus.
(2) GENERAL information
The SB Reporting policy is published in ISI 00.00.00135. This document provides
information regarding: the SB Reporting means and benefits, the update of
customized Maintenance Products and customized Flight Operations Products.
If this Service Bulletin has an operational impact, refer to paragraph "Flight Operations
Products" for further information on the update of affected Flight Operations Products.
(3) SB Reporting procedure
Standard practice to report SB is to use the online reporting application on
AirbusWorld.
Refer to ISI 00.00.00179:
- For complete information on reporting means to Airbus, Question 2 "What are
the standard practices for SB Reporting?"
- If this SB requires previous or simultaneous accomplishment of other SBs,
Question 3 "What about the reporting of prerequisite Service Bulletins?"
NOTE: ISI 00.00.00179 covers all the frequently asked questions about SB Reporting.
It is revised on a regular basis.

### Page 41

A350
SERVICE BULLETIN
APPENDIX
REV 00 Jan 25/19 A350-25-P138
Page 41
B. QUALITY PERCEPTION FORM
Use this form to tell us what is your perception of the quality of this Service Bulletin.
The reported data that you provide us will be used to analyse areas of difficulties and to
take corrective action to further improve the quality of our Service Bulletin.
We thank you for the time you have taken in completing this form.
Quality rating of this SB 4 3 2 1
Quality rating of the Accomplishment Instructions 4 3 2 1
Quality rating of the Illustrations 4 3 2 1
Is this SB easy to understand ? Y / N
NOTE: Please rate on a scale of 1 to 4, with 4 being the highest score
If you have difficulties in the accomplishment of this SB please quote below the area(s) and
give a short description of the issue.
Planning Material Instructions
X Applicability X T ooling X Preparation
X Reason X List of Materials
Operator Supplied
X Mod/Inspection
X Manpower X Kit content X T est
X References X Re-identification X Close-up
X Publication X Illustrations
X Industry Support
Comments :
Operator : Date :
Name/Title
Please return this form to :
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
Or via your Resident Customer Support Office.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
