# Airbus Service Bulletin A350-25-P208

Copy: No revision named ("Airbus SB A350-25-P208"), 22 pages: PDF https://openairdocs.org/files/sha256/6d/98/6d98de997e9838903f6533e62ee852488d946701b4febc05b143ffd9033a13eb; text https://openairdocs.org/service-documents/airbus/a350-25-p208/file/6d98de997e98.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2023-2141, the docket of AD 2024-03-03. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A350-25-P208
- Page: https://openairdocs.org/service-documents/airbus/a350-25-p208

## Text (22 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2023-2141, the docket of AD 2024-03-03. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

A350
SERVICE BULLETIN
REV 00 Jan 31/23 A350-25-P208
Page 1
CONF ALL
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
 
The content of this document is the property of Airbus. All rights including copyrights are reserved.
It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may information
contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of the
copyright. Requests for reproduction of any data in this document and the media authorized for it must
be addressed to Airbus.
MANDATORY MANDATORY MANDATORY
ATA SYSTEM: 25
TITLE: EQUIPMENT/FURNISHINGS - LAVATORIES - INSPECTION - LAVATORY
FLOOR FITTINGS CORROSION
MODIFICATION No.:
None

### Page 2

A350
SERVICE BULLETIN
SUMMARY
REV 00 Jan 31/23 A350-25-P208
Page 2
ATA SYSTEM: 25
TITLE: EQUIPMENT/FURNISHINGS - LAVATORIES - INSPECTION - LAVATORY
FLOOR FITTINGS CORROSION
SUMMARY
This summary is for information only and is not approved for modification of the aircraft.
A. MODIFICATIONS
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
B. REASON
(1) History
Several findings have been reported at the 72 month checks of lavatory floor fittings
impacted with corrosion.
(2) Objective/Action
This Service Bulletin is published to describe the inspection of lavatory floor fittings for
corrosion.
(3) Advantages
The accomplishment of this Service Bulletin will maintain the A350 impacted fleet
airworthiness.
(4) Operational/Maintenance Consequences
None
C. GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE MANDATORY COST SAVING NO
A/C OPERATION
AFFECTED
NO VENDOR SB NO
CANCELS INSPECTION SB NO ETOPS AFFECTED NO
PAX COMFORT AFFECTED NO POTENTIAL AD YES
RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO
LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO
NOTE: Service Bulletin must be accomplished.
D. MAINTENANCE CONFIGURATION
No specific aircraft maintenance configuration required.
E. MATERIAL PRICE INFORMATION

### Page 3

A350
SERVICE BULLETIN
SUMMARY
REV 00 Jan 31/23 A350-25-P208
Page 3
(1) Inspection
(a) T ask set A350-A-25-XX-P208-05000-93BA-A Inspection
No material
F. APPLICABILITY
This Service Bulletin is applicable to this (these) operator(s):
36V 82W 87Z 96U AAR AFL AFR AIC AZU BAW CAL CCA CES CHH CPA CRK CSC CSN DAL DLH
ETD ETH EVE FBU FIN FJI FWI GAF HVN IBE ITY JAL KAY MAS MAU PAL QTR SAS SIA SJX THA
THY VIR WFL
G. CONCURRENT REQUIREMENTS
None
H. NATURE OF THE WORK
(1) Inspection
(a) T ask set A350-A-25-XX-P208-05000-93BA-A Inspection
AIRCRAFT YES
EQUIPMENT NO
I. MANPOWER
(1) Inspection
(a) T ask set A350-A-25-XX-P208-05000-93BA-A Inspection
MANPOWER
TOTAL MAN-HOURS 4.25 h
ELAPSED TIME (HOURS) 2.25 h

### Page 4

A350
SERVICE BULLETIN
SUMMARY
Figure ICN-A350-A-25XXP208-A-FAPE3-06SLJ-A-002-01 Fig.SA Sol.AA SHEET 1/1
REV 00 Jan 31/23 A350-25-P208General Overview
Page 4
J. GENERAL OVERVIEW
CONF ALL
A
FR11
FR18
FR21
FR32
FR46
BFR90
FR84
C
Z250
Z270
A
B C
Z260
Z220
NOTE:
LOCATION OF LAVATORIES DEPEND ON THE AIRCRAFT CONFIGURATION.
INSPECTION OF THE LAVATORY FLOOR FITTINGS
INSPECTION OF THE LAVATORY FLOOR FITTINGS
INSPECTION OF THE LAVATORY FLOOR FITTINGS
INSPECTION OF THE LAVATORY FLOOR FITTINGS
INSPECTION OF THE LAVATORY FLOOR FITTINGS
INSPECTION OF THE LAVATORY FLOOR FITTINGS
ICN-A350-A-25XXP208-A-FAPE3-06SLJ-A-002-01

### Page 5

A350
SERVICE BULLETIN
REV 00 Jan 31/23 A350-25-P208
Page 5
ATA SYSTEM: 25
TITLE: EQUIPMENT/FURNISHINGS - LAVATORIES - INSPECTION - LAVATORY
FLOOR FITTINGS CORROSION
1. PLANNING INFORMATION
A. APPLICABILITY
(1) Models
ON A/C 0065, 0071, 0088, 0102, 0110, 0118, 0125, 0141, 0161, 0169, 0188, 0206, 0215,
0225, 0229, 0233, 0241, 0252, 0258, 0262, 0266, 0274, 0286, 0290, 0296, 0298, 0306,
0315, 0319, 0326, 0330, 0332, 0336, 0340, 0342, 0346, 0350, 0356, 0362, 0368, 0372,
0374, 0380, 0382, 0386, 0388, 0399, 0402, 0415, 0420, 0424, 0426, 0432, 0434, 0446,
0473, 0482, 0490, 0492, 0495, 0503, 0507, 0509, 0533, 0539, 0547, 0560, 0563, 0584,
0600, 0605, 0609, 0610, 0617, 0623, 0628, 0635, 0639
350-1041
ON A/C 0005-0058, 0060-0064, 0066-0070, 0072-0087, 0089-0101, 0103-0107, 0109, 0111-
0117, 0119-0124, 0126-0130, 0132-0138, 0140, 0142-0151, 0153-0155, 0157-0160, 0162-
0165, 0167, 0168, 0170, 0172-0187, 0189-0193, 0195-0205, 0207-0214, 0216-0221, 0223,
0224, 0226-0228, 0230-0232, 0234-0240, 0243, 0245-0251, 0254-0257, 0259-0261, 0263-
0265, 0267-0273, 0276-0285, 0287, 0289, 0291-0295, 0297, 0299-0303, 0305, 0307-0314,
0316, 0318, 0320-0325, 0327-0329, 0331, 0333-0335, 0337-0339, 0341, 0343-0345, 0347-
0349, 0351, 0352, 0354, 0355, 0357-0359, 0363-0366, 0369-0371, 0373, 0375, 0376, 0378,
0379, 0381, 0383, 0385, 0387, 0389-0398, 0400, 0401, 0403-0408, 0410-0414, 0416-0419,
0421-0423, 0425, 0427-0429, 0431, 0433, 0435-0437, 0439, 0441-0443, 0445, 0447-0449,
0451-0455, 0457-0460, 0462-0466, 0468-0472, 0474-0476, 0478-0481, 0483-0485, 0487-
0489, 0491, 0493, 0494, 0496, 0497, 0499, 0500, 0502, 0504-0506, 0510, 0512, 0516, 0517,
0520, 0524, 0526, 0528, 0530, 0531, 0535-0538, 0540-0546, 0548-0552, 0554, 0556-0559,
0561, 0562, 0564, 0565, 0567-0583, 0585, 0587-0599, 0602-0604, 0607, 0611-0616, 0618,
0619, 0621, 0622, 0624-0627, 0629-0634, 0636-0638, 0640, 0641, 0643-0645, 0648
350-941
CONF ALL
(2) Applicability by MSN
0005-0058 0060-0107 0109-0130 0132-0138 0140-0151 0153-0155 0157-0165 0167-
0170 0172-0193 0195-0221 0223-0241 0243 0245-0252 0254-0274 0276-0287 0289-
0303 0305-0316 0318-0352 0354-0359 0362-0366 0368-0376 0378-0383 0385-0408
0410-0429 0431-0437 0439 0441-0443 0445-0449 0451-0455 0457-0460 0462-0466
0468-0476 0478-0485 0487-0497 0499 0500 0502-0507 0509 0510 0512 0516 0517
0520 0524 0526 0528 0530 0531 0533 0535-0552 0554 0556-0565 0567-0585 0587-
0600 0602-0605 0607 0609-0619 0621-0641 0643-0645 0648
(3) MSN by configuration
MSN CONFIGURATION
0005 0006 0007 0008 0009 0010 0011 0012 0013 0014 0015
0016 0017 0018 0019 0020 0021 0022 0023 0024 0025 0026
0027 0028 0029 0030 0031 0032 0033 0034 0035 0036 0037
0038 0039 0040 0041 0042 0043 0044 0045 0046 0047 0048
0049 0050 0051 0052 0053 0054 0055 0056 0057 0058 0060
0061 0062 0063 0064 0065 0066 0067 0068 0069 0070 0071
0072 0073 0074 0075 0076 0077 0078 0079 0080 0081 0082
0083 0084 0085 0086 0087 0088 0089 0090 0091 0092 0093
0094 0095 0096 0097 0098 0099 0100 0101 0102 0103 0104
0105 0106 0107 0109 0110 0111 0112 0113 0114 0115 0116
001

### Page 6

A350
SERVICE BULLETIN
REV 00 Jan 31/23 A350-25-P208
Page 6
MSN CONFIGURATION
0117 0118 0119 0120 0121 0122 0123 0124 0125 0126 0127
0128 0129 0130 0132 0133 0134 0135 0136 0137 0138 0140
0141 0142 0143 0144 0145 0146 0147 0148 0149 0150 0151
0153 0154 0155 0157 0158 0159 0160 0161 0162 0163 0164
0165 0167 0168 0169 0170 0172 0173 0174 0175 0176 0177
0178 0179 0180 0181 0182 0183 0184 0185 0186 0187 0188
0189 0190 0191 0192 0193 0195 0196 0197 0198 0199 0200
0201 0202 0203 0204 0205 0206 0207 0208 0209 0210 0211
0212 0213 0214 0215 0216 0217 0218 0219 0220 0221 0223
0224 0225 0226 0227 0228 0229 0230 0231 0232 0233 0234
0235 0236 0237 0238 0239 0240 0241 0243 0245 0246 0247
0248 0249 0250 0251 0252 0254 0255 0256 0257 0258 0259
0260 0261 0262 0263 0264 0265 0266 0267 0268 0269 0270
0271 0272 0273 0274 0276 0277 0278 0279 0280 0281 0282
0283 0284 0285 0286 0287 0289 0290 0291 0292 0293 0294
0295 0296 0297 0298 0299 0300 0301 0302 0303 0305 0306
0307 0308 0309 0310 0311 0312 0313 0314 0315 0316 0318
0319 0320 0321 0322 0323 0324 0325 0326 0327 0328 0329
0330 0331 0332 0333 0334 0335 0336 0337 0338 0339 0340
0341 0342 0343 0344 0345 0346 0347 0348 0349 0350 0351
0352 0354 0355 0356 0357 0358 0359 0362 0363 0364 0365
0366 0368 0369 0370 0371 0372 0373 0374 0375 0376 0378
0379 0380 0381 0382 0383 0385 0386 0387 0388 0389 0390
0391 0392 0393 0394 0395 0396 0397 0398 0399 0400 0401
0402 0403 0404 0405 0406 0407 0408 0410 0411 0412 0413
0414 0415 0416 0417 0418 0419 0420 0421 0422 0423 0424
0425 0426 0427 0428 0429 0431 0432 0433 0434 0435 0436
0437 0439 0441 0442 0443 0445 0446 0447 0448 0449 0451
0452 0453 0454 0455 0457 0458 0459 0460 0462 0463 0464
0465 0466 0468 0469 0470 0471 0472 0473 0474 0475 0476
0478 0479 0480 0481 0482 0483 0484 0485 0487 0488 0489
0490 0491 0492 0493 0494 0495 0496 0497 0499 0500 0502
0503 0504 0505 0506 0507 0509 0510 0512 0516 0517 0520
0524 0526 0528 0530 0531 0533 0535 0536 0537 0538 0539
0540 0541 0542 0543 0544 0545 0546 0547 0548 0549 0550
0551 0552 0554 0556 0557 0558 0559 0560 0561 0562 0563
0564 0565 0567 0568 0569 0570 0571 0572 0573 0574 0575
0576 0577 0578 0579 0580 0581 0582 0583 0584 0585 0587
0588 0589 0590 0591 0592 0593 0594 0595 0596 0597 0598
0599 0600 0602 0603 0604 0605 0607 0609 0610 0611 0612
0613 0614 0615 0616 0617 0618 0619 0621 0622 0623 0624
0625 0626 0627 0628 0629 0630 0631 0632 0633 0634 0635
0636 0637 0638 0639 0640 0641 0643 0644 0645 0648
(4) Configuration definition
Configuration 001
CONF 001 is applicable for all the aircraft affected by this Service Bulletin as a
standard configuration.
B. CONCURRENT REQUIREMENTS
None
C. REASON

### Page 7

A350
SERVICE BULLETIN
REV 00 Jan 31/23 A350-25-P208
Page 7
(1) History
Several findings have been reported at the 72 month checks of lavatory floor fittings
impacted with corrosion.
(2) Objective/Action
This Service Bulletin is published to describe the inspection of lavatory floor fittings for
corrosion.
(3) Advantages
The accomplishment of this Service Bulletin will maintain the A350 impacted fleet
airworthiness.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
T o accomplish this Service Bulletin it is necessary to:
(1) Inspection
(a) T ask set A350-A-25-XX-P208-05000-93BA-A Inspection
1 Do a General Visual Inspection of the Lavatory Floor Fittings
2 Complete and Send the Inspection Report Sheet
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
This Service Bulletin has been classified Mandatory. It is expected that an
Airworthiness Directive (AD) published by the European Union Aviation Safety Agency
(EASA) will be issued to confirm this classification. The accomplishment timescale,
which has not yet been defined, will be given in the AD.
T able 1, CONF 001 - General visual inspection of lavatory floor fittings for aircraft that
have not applied MPD 254000-00M01 before AD issuance date
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL
Aircraft that
have not applied
MPD 254000-
00M01 before
AD issuance date
Do a general
visual inspection
of lavatory
floor fittings
in accordance
with Ref. T ask
set A350-A-
25-XX-P208-
05ZZZ-93BZ-A
3 years after
Entry into
Service (EIS) or
6 months after
the AD issuance,
whichever
occurs later.
None 3 year(s)
If any damage
other than
corrosion found
Repair or replace
the damaged
lavatory
floor fittings
Before next flight None None

### Page 8

A350
SERVICE BULLETIN
REV 00 Jan 31/23 A350-25-P208
Page 8
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL
If any sign of
corrosion found
Replace the
affected lavatory
floor fittings
Before next flight None None
Report and send
the completed
inspection
report sheet in
accordance with
Ref. T ask A350-
A-25-XX-P208-
01ZZZ-90AZ-A
None None None
Send the parts
to AIRBUS
None None None
If no sign of
corrosion found
Report and send
the completed
inspection
report sheet in
accordance with
Ref. T ask A350-
A-25-XX-P208-
01ZZZ-90AZ-A
None None None
NOTE: All MSNs to be inspected within 3 years after EIS or MPD task application or 6
months after the AD issuance, whichever occurs later.
T able 2, CONF 001 - General visual inspection of lavatory floor fittings for aircraft that
have applied MPD 254000-00M01 before AD issuance date
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL
Aircraft that
have applied
MPD 254000-
00M01 before
AD issuance date
Do a general
visual inspection
of lavatory
floor fittings
in accordance
with Ref. T ask
set A350-A-
25-XX-P208-
05ZZZ-93BZ-A
3 years after
application
of MPD
254000-00M01
None 3 year(s)
If any damage
other than
corrosion found
Repair or replace
the damaged
lavatory
floor fittings
Before next flight None None
If any sign of
corrosion found
Replace the
affected lavatory
floor fittings
Before next flight None None
Report and send
the completed
inspection
report sheet in
accordance with
None None None

### Page 9

A350
SERVICE BULLETIN
REV 00 Jan 31/23 A350-25-P208
Page 9
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL
Ref. T ask A350-
A-25-XX-P208-
01ZZZ-90AZ-A
Send the parts
to AIRBUS
None None None
If no sign of
corrosion found
Report and send
the completed
inspection
report sheet in
accordance with
Ref. T ask A350-
A-25-XX-P208-
01ZZZ-90AZ-A
None None None
NOTE: All MSNs to be inspected within 3 years after EIS or MPD task application or 6
months after the AD issuance, whichever occurs later.
F. APPROVAL
The technical content of this document is approved under the authority of the Design
Organisation Approval ref. EASA.21J.031.
If an aircraft listed in the applicability has a modification or repair embodied that is not
of AIRBUS origin, and which affects the content of this Service Bulletin, the operator
is responsible for obtaining approval by its airworthiness authority for any adaptation
necessary before incorporation of the Service Bulletin.
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Inspection
(a) T ask set A350-A-25-XX-P208-05000-93BA-A Inspection
PREPARATION
Job Set-up 1.00 h
PROCEDURE
Do a General Visual Inspection of the Lavatory Floor
Fittings
2.00 h
Complete and Send the Inspection Report Sheet 0.25 h
PREPARATION FOR TEST
None
TEST
None
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 4.25 h

### Page 10

A350
SERVICE BULLETIN
REV 00 Jan 31/23 A350-25-P208
Page 10
ELAPSED TIME (HOURS) 2.25 h
NOTE: The man-hours for the inspection of the lavatory floor fittings are
calculated for the single lavatory.
NOTE: The minimum man-hours necessary to accomplish this Service Bulletin
are those for the Inspection. Depending on the inspection result,
additional man-hours can apply.
H. WEIGHT AND BALANCE
Not changed
I. ELECTRICAL LOAD DATA
Not changed
J. REFERENCES
(1) Inspection
(a) T ask set A350-A-25-XX-P208-05000-93BA-A Inspection
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
IN SERVICE INFORMATION (ISI)
00.00.00179
MAINTENANCE PROCEDURE (MP)
A350-A-24-41-XX-00ZZZ-170Z-A A350-A-25-41-XX-01ZZZ-310Z-A
A350-A-25-41-XX-04ZZZ-170Z-A
A350-A-25-41-XX-10ZZZ-170Z-A
SYSTEM DESCRIPTION (SD)
A350-A-06-2X-XX-01ZZZ-04CZ-A A350-A-06-3X-XX-01ZZZ-04CZ-A
A350-A-25-41-XX-01ZZZ-04CZ-A
K. PUBLICATION AFFECTED
None
L. INDUSTRY SUPPORT INFORMATION
This Service Bulletin is the subject of an AIRBUS monitored retrofit campaign. For detailed
support, please refer to the related RIL V25M23000039.
For the organization of this retrofit, you are kindly requested to contact AIRBUS retrofit
management department: monitored.retrofit@airbus.com.

### Page 11

A350
SERVICE BULLETIN
REV 00 Jan 31/23 A350-25-P208
Page 11
2. MATERIAL INFORMATION
A. MATERIAL APPLICABILITY
No material for task set A350-A-25-XX-P208-05000-93BA-A Inspection
B. TOOLING
No tools
C. CONSUMABLES
No consumables
D. LIST OF NEW PARTS
No parts
E. LIST OF EXISTING PARTS
No parts

### Page 12

A350
SERVICE BULLETIN
REV 00 Jan 31/23 A350-25-P208
Page 12
3. ACCOMPLISHMENT INSTRUCTIONS
Task set A350-A-25-XX-P208-05000-93BA-A (A350-A-25-XX-P208-05ZZZ-93BZ-A)
Inspection
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL
WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND MECHANICALLY
SERVICEABLE). WHEN YOU DO A MAINTENANCE WORK, REPAIRS OR
MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND
THE WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND
DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO Ref. ESP A350-A-20-55-XX-01ZZZ-
042Z-A.
NOTE: The accomplishment instructions of this Service Bulletin include procedures given in
other documents or in other sections of the Service Bulletin. When the words “refer to”
are used and the operator has a procedure accepted by the local authority he belongs to,
the accepted alternative procedure can be used. When the words “in accordance with”
are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service Bulletin.
Operators can therefore, as deemed necessary, omit or add access and/or close-up steps
to add flexibility to their maintenance operations as long as the technical intent of the
Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms. Refer
to paragraph 1.J., References, for the definition of acronyms.
NOTE: This Service Bulletin is classified mandatory or expected to be classified mandatory by
an Airworthiness Directive (AD). The paragraphs 3.C. and 3.E. in these accomplishment
instructions are Required for Compliance (RC) and must be done to comply with the AD.
T o allow more flexibility, the rule "refer to" and "in accordance with" will apply to these
paragraphs 3.C. and 3.E. Other paragraphs are recommended and may be deviated from,
done as part of other actions or done with accepted methods different from those given
in the Service Bulletin, as long as the RC paragraphs can be done and the aircraft can be
put back into a serviceable condition.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance necessary
to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, including Required for Compliance paragraph
contained herein, contact AIRBUS for further instructions and approval.
NOTE: The purpose of flowcharts is to supplement the information given in the Procedure and
Compliance paragraphs and not to serve as the primary source for tasks or compliance
times given in this Service Bulletin.
A. TASK SET ASSOCIATED INFORMATION
Task Manpower
TOTAL MAN-HOURS 4.25 h

### Page 13

A350
SERVICE BULLETIN
REV 00 Jan 31/23 A350-25-P208
Page 13
ELAPSED TIME (HOURS) 2.25 h
B. PREPARATION
(1) Task A350-A-25-XX-P208-01001-540A-A (A350-A-25-XX-P208-01ZZZ-540Z-A)
Job Set-up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 2
Elapsed Time 0.50 h
Referenced Information
Manuals/Drawings References/Sheets
INTRO A350-A-00-61-04-11ZZZ-018Z-D
MP A350-A-24-41-XX-00ZZZ-170Z-AA350-A-25-41-XX-04ZZZ-170Z-A
SD A350-A-25-41-XX-01ZZZ-04CZ-A
Procedure
NOTE: For the basic Aircraft configuration, refer to Ref. INTRO A350-A-00-61-04-
11ZZZ-018Z-D “Maintenance Procedure - Introduction”.
(a) Make sure that the aircraft is electrically grounded, refer to Ref. MP A350-A-24-
41-XX-00ZZZ-170Z-A.
(b) For the component location of the lavatories, refer to Ref. SD A350-A-25-41-XX-
01ZZZ-04CZ-A.
(c) Get access to the lavatory.
(d) Get access to the lavatory floor fittings, refer to Ref. MP A350-A-25-41-XX-04ZZZ-
170Z-A.
C. PROCEDURE
(1) Task A350-A-25-XX-P208-01001-311A-A (A350-A-25-XX-P208-01ZZZ-311Z-A)
Do a General Visual Inspection of the Lavatory Floor Fittings
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 2.00 h
Minimum Number of person 2
Elapsed Time 1.00 h
Skills Airframe
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-25-41-XX-01ZZZ-310Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-3X-XX-01ZZZ-04CZ-A
Procedure

### Page 14

A350
SERVICE BULLETIN
REV 00 Jan 31/23 A350-25-P208
Page 14
(a) Standard practices given in this procedure:
1 For the Zone identification, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-04CZ-
A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-XX-01ZZZ-
04CZ-A.
(b) Do a general visual inspection of the lavatory floor fittings, refer to Ref. MP A350-
A-25-41-XX-01ZZZ-310Z-A, Ref. Fig.BA Inspection of the Lavatory Floor Fittings
and Ref. Fig.FA Flowchart.
1 If damage is found other than corrosion:
a Repair or replace the damaged lavatory floor fittings, refer to CMM
25-40-XX and CMM 25-70-XX.
2 If no damage found other than corrosion, go to next step.
3 If corrosion is found:
a Replace the affected lavatory floor fittings, refer to CMM 25-40-XX
and CMM 25-70-XX.
b After completion of all inspections, complete and send the Inspection
Report sheet in accordance with Ref. T ask A350-A-25-XX-P208-01ZZZ-
90AZ-A.
c Send the damaged parts to AIRBUS.
4 If no corrosion is found:
a After completion of all inspections, complete and send the Inspection
Report sheet in accordance with Ref. T ask A350-A-25-XX-P208-01ZZZ-
90AZ-A.
5 Go to the next lavatory, perform the step (b).
6 Repeat the inspection at the intervals given in accordance with the
accomplishment timescale in Para. 1.E.(2).

### Page 15

A350
SERVICE BULLETIN
Figure ICN-A350-A-25XXP208-A-FAPE3-06SLG-A-002-01 Fig.BA Sol.AA SHEET 1/2
REV 00 Jan 31/23 A350-25-P208Inspection of the Lavatory Floor Fittings
Page 15
CONF ALL
A
FR11
FR18
FR21
FR32
FR46
BFR90
FR84
C
Z250
Z270
A
B C
Z260
Z220
D
D
D
D
D
NOTE:
LOCATION OF LAVATORIES DEPEND ON THE AIRCRAFT CONFIGURATION.
E
ICN-A350-A-25XXP208-A-FAPE3-06SLG-A-002-01

### Page 16

A350
SERVICE BULLETIN
Figure ICN-A350-A-25XXP208-A-FAPE3-06SLH-A-002-01 Fig.BA Sol.AA SHEET 2/2
REV 00 Jan 31/23 A350-25-P208Inspection of the Lavatory Floor Fittings
Page 16
CONF ALL
INSPECTION AREA
NOTE:
TYPICAL VIEW
D
LAVATORY FLOOR FITTINGS
TYPICAL VIEW
F
E
F
F
F
F
F
F
F
F
F
F
ICN-A350-A-25XXP208-A-FAPE3-06SLH-A-002-01

### Page 17

A350
SERVICE BULLETIN
Figure ICN-A350-A-25XXP208-A-FAPE3-06SLI-A-002-01 Fig.FA Sol.AA SHEET 1/1
REV 00 Jan 31/23 A350-25-P208Flowchart
Page 17
CONF ALL
FOR THE ACCOMPLISHMENT TIMESCALE, REFER TO PARAGRAPH 1.E.(2).01
NOTE:
THE PURPOSE OF FLOWCHARTS IS TO SUPPLEMENT THE INFORMATION
GIVEN IN THE PROCEDURE AND COMPLIANCE PARAGRAPHS AND NOT TO
SERVE AS THE PRIMARY SOURCE FOR TASKS OR COMPLIANCE TIMES
GIVEN IN THIS SERVICE BULLETIN.
NO
IS THERE ANY
 DAMAGE OTHER THAN
DO A GENERAL VISUAL INSPECTION OF THE 
LAVATORY FLOOR FITTINGS 01
ANY SIGN OF
CORROSION?
IS THERE
YES
REPLACE THE AFFECTED LAVATORY
FLOOR FITTINGS
REPORT AND SEND THE COMPLETED 
01INSPECTION REPORT SHEET
NO
YES CORROSION?
REPAIR OR REPLACE THE DAMAGED
LAVATORY FLOOR FITTINGS 01
REPORT AND SEND THE COMPLETED
INSPECTION REPORT SHEET
SEND THE PARTS TO AIRBUS
01
01
ICN-A350-A-25XXP208-A-FAPE3-06SLI-A-002-01

### Page 18

A350
SERVICE BULLETIN
REV 00 Jan 31/23 A350-25-P208
Page 18
(2) Task A350-A-25-XX-P208-01001-90AA-A (A350-A-25-XX-P208-01ZZZ-90AZ-A)
Complete and Send the Inspection Report Sheet
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 0.25 h
Minimum Number of person 1
Elapsed Time 0.25 h
Referenced Information
Manuals/Drawings References/Sheets
ISI 00.00.00179
Procedure
Ref. Fig.RA Inspection Report.
(a) Complete the Inspection Report sheet, refer to Ref. Fig. Inspection Report sheet.
(b) Send the completed Inspection Report sheet in accordance with Ref. ISI
00.00.00179.
NOTE: T o send the Inspection Report sheet is not Required for Compliance (RC).

### Page 19

A350
SERVICE BULLETIN
Figure ICN-A350-A-25XXP208-A-FAPE3-06SLK-A-002-01 Fig.RA Sol.AA SHEET 1/1
REV 00 Jan 31/23 A350-25-P208Inspection Report
Page 19
CONF ALL
INSPECTION REPORT
SERVICE BULLETIN No :
A/C MSN :
FLIGHT CYCLES :
FLIGHT HOURS :
A350-25-P208
DATE OF INSPECTION :
INSPECTION METHOD :
SEND THE COMPLETED INSPECTION REPORT
SHEET IN ACCORDANCE WITH ISI 00.00.00179
GENERAL VISUAL
INSPECTION
REMARKS:
FLOOR FITTING AFFECTED:
IS THERE ANY SIGN OF CORROSION: YES NO
LAVATORY AFFECTED: LAVATORY No: 
SEND THE DAMAGED FITTINGS TO AIRBUS: YES NO
ICN-A350-A-25XXP208-A-FAPE3-06SLK-A-002-01

### Page 20

A350
SERVICE BULLETIN
REV 00 Jan 31/23 A350-25-P208
Page 20
D. PREPARATION FOR TEST
None
E. TEST
None
F. CLOSE-UP
(1) Task A350-A-25-XX-P208-01001-740A-A (A350-A-25-XX-P208-01ZZZ-740Z-A)
Close-up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 2
Elapsed Time 0.50 h
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-25-41-XX-10ZZZ-170Z-A
Procedure
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Close access to the lavatory floor fittings, refer to Ref. MP A350-A-25-41-XX-
10ZZZ-170Z-A.
(c) Close the access to the lavatory.
(d) Put the aircraft back to its initial configuration.
G. ADMINISTRATIVE
(1) Task A350-A-25-XX-P208-02001-90AA-A (A350-A-25-XX-P208-02ZZZ-90AZ-A)
Administrative
Procedure
Confirm in the applicable aircraft records that you have completed all the work defined
in this Service Bulletin task set as required.

### Page 21

A350
SERVICE BULLETIN
APPENDIX
REV 00 Jan 31/23 A350-25-P208
Page 21
APPENDIX
A. REPORTING SHEET
TITLE: EQUIPMENT/FURNISHINGS - LAVATORIES - INSPECTION - LAVATORY
FLOOR FITTINGS CORROSION
MODIFICATION No.: None
(1) SB Reporting status
This Service Bulletin will only be incorporated into affected customized Maintenance
and Flight Operations Products if it is duly reported to Airbus.
(2) GENERAL information
The SB Reporting policy is published in ISI 00.00.00135. This document provides
information regarding: the SB Reporting means and benefits, the update of
customized Maintenance Products and customized Flight Operations Products.
If this Service Bulletin has an operational impact, refer to paragraph "Flight Operations
Products" for further information on the update of affected Flight Operations Products.
(3) SB Reporting procedure
Standard practice to report SB is to use the online reporting application on
AirbusWorld.
Refer to ISI 00.00.00179:
- For complete information on reporting means to Airbus, Question 2 "What are
the standard practices for SB Reporting?"
- If this SB requires previous or simultaneous accomplishment of other SBs,
Question 3 "What about the reporting of prerequisite Service Bulletins?"
NOTE: ISI 00.00.00179 covers all the frequently asked questions about SB Reporting.
It is revised on a regular basis.

### Page 22

A350
SERVICE BULLETIN
APPENDIX
REV 00 Jan 31/23 A350-25-P208
Page 22
B. QUALITY PERCEPTION FORM
Use this form to tell us what is your perception of the quality of this Service Bulletin.
The reported data that you provide us will be used to analyse areas of difficulties and to
take corrective action to further improve the quality of our Service Bulletin.
We thank you for the time you have taken in completing this form.
Quality rating of this SB 4 3 2 1
Quality rating of the Accomplishment Instructions 4 3 2 1
Quality rating of the Illustrations 4 3 2 1
Is this SB easy to understand ? Y / N
NOTE: Please rate on a scale of 1 to 4, with 4 being the highest score
If you have difficulties in the accomplishment of this SB please quote below the area(s) and
give a short description of the issue.
Planning Material Instructions
X Applicability X T ooling X Preparation
X Reason X List of Materials
Operator Supplied
X Mod/Inspection
X Manpower X Kit content X T est
X References X Re-identification X Close-up
X Publication X Illustrations
X Industry Support
Comments :
Operator : Date :
Name/Title
Please return this form to :
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
Or via your Resident Customer Support Office.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
