# Airbus Service Bulletin A350-27-P022

Copy: No revision named ("SB A350-27-P022"), 122 pages: PDF https://openairdocs.org/files/sha256/65/75/6575804f1795dda64c37df39fd330bd0b5e53f45a8ef798f08fe27d9fd9a3df0; text https://openairdocs.org/service-documents/airbus/a350-27-p022/file/6575804f1795.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2019-0122; AD 2019-05-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A350-27-P022
- Page: https://openairdocs.org/service-documents/airbus/a350-27-p022

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2019-05-10](https://openairdocs.org/ad/2019-05-10.md), effective Apr 8, 2019: No revision named

## Text (122 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2019-0122; AD 2019-05-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 1
CONF ALL
AIRBUS S.A.S.
Customer Services
T echnical Data Support and Services
31703 Blagnac Cedex
FRANCE
 
The content of this document is the property of Airbus.
It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may information
contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of the
copyright. Requests for reproduction of any data in this document and the media authorized for it must
be addressed to Airbus.
MANDATORY MANDATORY MANDATORY
ATA SYSTEM: 27
TITLE: FLIGHT CONTROLS - INSPECTION / CHECK FOR CORRECT SHAFT
INSTALLATION AT FLAP/SLAT JUNCTION
MODIFICATION No.:
None

### Page 2

A350
SERVICE BULLETIN
SUMMARY
REV 00 Jun 06/18 A350-27-P022
Page 2
ATA SYSTEM: 27
TITLE: FLIGHT CONTROLS - INSPECTION / CHECK FOR CORRECT SHAFT
INSTALLATION AT FLAP/SLAT JUNCTION
SUMMARY
This summary is for information only and is not approved for modification of the aircraft.
A. MODIFICATIONS
CONF 001
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 002
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 003
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF ALL
B. REASON
(1) History
At the opportunity of a Visual Inspection during aircraft manufacturing, untorqued nuts
at the shaft junction have been reported.
As per the design specification, no effect on the transmission operation occurs
when only one connection bolt over four is missing. Aircraft systems are designed to
stop and hold the slat and flap surface in position in the case of a single flap or slat
transmission disconnection. In the case of further unexpected independent failure
and two connecting parts are missing or not torqued correctly on a shaft junction, free
movement of the affected surface may be encountered.

### Page 3

A350
SERVICE BULLETIN
SUMMARY
REV 00 Jun 06/18 A350-27-P022
Page 3
(2) Objective/Action
This Inspection Service Bulletin requires a one time inspection on each junction of the
Flap T orque-Shaft 2, the Slat T orque-Shaft 2 and the Slat T orque-Shaft 4 to ensure that
on each potentially affected shaft junction, no more than one nut is found untorqued
or no more than one bolt is missing.
A correctly torqued bolt is identified by confirming an intact torque marking (red line
on the bolt).
Depending on any findings, torque the affected nut(s) or remove and reinstall the
Line-Replaceable Unit (LRU).
(3) Advantages
The accomplishment of this Service Bulletin will ensure detection and/or prevention of
possible damage at an early stage and will avoid expensive repairs.
(4) Operational/Maintenance Consequences
None
C. GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE MANDATORY COST SAVING NO
A/C OPERATION
AFFECTED
NO VENDOR SB NO
CANCELS INSPECTION SB NO ETOPS AFFECTED NO
PAX COMFORT AFFECTED NO POTENTIAL AD YES
RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO
LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO
NOTE: Service Bulletin must be accomplished.
D. MAINTENANCE CONFIGURATION
CONF 001
None
CONF 002
None
CONF 003
None
CONF ALL
E. MATERIAL PRICE INFORMATION
CONF 001
(1) Inspection

### Page 4

A350
SERVICE BULLETIN
SUMMARY
REV 00 Jun 06/18 A350-27-P022
Page 4
(a) T ask set A350-A-27-XX-P022-01000-93BA-A Inspection
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS
Equipment See SB See Note Flap Shaft Assy-2, Bolt,
Nut,Slat Shaft Assy-2, Slat
Shaft Assy-4, Screw, Nut
NOTE: Price information to be acquired by the given supplier.
(2) Repair
(a) T ask set A350-A-27-XX-P022-01000-93CA-A Repair
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS
Equipment See SB See Note Flap Shaft Assy-2, Bolt,
Nut,Slat Shaft Assy-2, Slat
Shaft Assy-4, Screw, Nut
NOTE: Price information to be acquired by the given supplier.
CONF 002
(1) Inspection
(a) T ask set A350-A-27-XX-P022-01000-93BA-A Inspection
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS
Equipment See SB See Note Flap Shaft Assy-2, Bolt,
Nut,Slat Shaft Assy-2, Slat
Shaft Assy-4, Screw, Nut
NOTE: Price information to be acquired by the given supplier.
(2) Repair
(a) T ask set A350-A-27-XX-P022-01000-93CA-A Repair
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS
Equipment See SB See Note Flap Shaft Assy-2, Bolt,
Nut,Slat Shaft Assy-2, Slat
Shaft Assy-4, Screw, Nut
NOTE: Price information to be acquired by the given supplier.
CONF 003
(1) Inspection

### Page 5

A350
SERVICE BULLETIN
SUMMARY
REV 00 Jun 06/18 A350-27-P022
Page 5
(a) T ask set A350-A-27-XX-P022-01000-93BA-A Inspection
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS
Equipment See SB See Note Flap Shaft Assy-2, Bolt,
Nut,Slat Shaft Assy-2, Slat
Shaft Assy-4, Screw, Nut
NOTE: Price information to be acquired by the given supplier.
(2) Repair
(a) T ask set A350-A-27-XX-P022-01000-93CA-A Repair
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS
Equipment See SB See Note Flap Shaft Assy-2, Bolt,
Nut,Slat Shaft Assy-2, Slat
Shaft Assy-4, Screw, Nut
NOTE: Price information to be acquired by the given supplier.
CONF ALL
F. APPLICABILITY
This Service Bulletin is applicable to this (these) operator(s):
AAR CAL CPA DAL DLH ETH FBU FIN FWI HVN QTR SIA TAM THA
G. CONCURRENT REQUIREMENTS
None
H. NATURE OF THE WORK
CONF 001
(1) Inspection
(a) T ask set A350-A-27-XX-P022-01000-93BA-A Inspection
AIRCRAFT YES
EQUIPMENT YES
(2) Repair
(a) T ask set A350-A-27-XX-P022-01000-93CA-A Repair
AIRCRAFT YES
EQUIPMENT YES
CONF 002
(1) Inspection
(a) T ask set A350-A-27-XX-P022-01000-93BA-A Inspection
AIRCRAFT YES
EQUIPMENT YES

### Page 6

A350
SERVICE BULLETIN
SUMMARY
REV 00 Jun 06/18 A350-27-P022
Page 6
(2) Repair
(a) T ask set A350-A-27-XX-P022-01000-93CA-A Repair
AIRCRAFT YES
EQUIPMENT YES
CONF 003
(1) Inspection
(a) T ask set A350-A-27-XX-P022-01000-93BA-A Inspection
AIRCRAFT YES
EQUIPMENT YES
(2) Repair
(a) T ask set A350-A-27-XX-P022-01000-93CA-A Repair
AIRCRAFT YES
EQUIPMENT YES
CONF ALL
I. MANPOWER
CONF 001
(1) Inspection
(a) T ask set A350-A-27-XX-P022-01000-93BA-A Inspection
MANPOWER
TOTAL MAN-HOURS 12.00 h
ELAPSED TIME (HOURS) 2.50 h
(2) Repair
(a) T ask set A350-A-27-XX-P022-01000-93CA-A Repair
MANPOWER
TOTAL MAN-HOURS 2.60 h
ELAPSED TIME (HOURS) 1.10 h
CONF 002
(1) Inspection
(a) T ask set A350-A-27-XX-P022-01000-93BA-A Inspection
MANPOWER
TOTAL MAN-HOURS 12.00 h
ELAPSED TIME (HOURS) 2.50 h
(2) Repair
(a) T ask set A350-A-27-XX-P022-01000-93CA-A Repair
MANPOWER
TOTAL MAN-HOURS 2.60 h
ELAPSED TIME (HOURS) 1.10 h

### Page 7

A350
SERVICE BULLETIN
SUMMARY
REV 00 Jun 06/18 A350-27-P022
Page 7
CONF 003
(1) Inspection
(a) T ask set A350-A-27-XX-P022-01000-93BA-A Inspection
MANPOWER
TOTAL MAN-HOURS 12.00 h
ELAPSED TIME (HOURS) 2.50 h
(2) Repair
(a) T ask set A350-A-27-XX-P022-01000-93CA-A Repair
MANPOWER
TOTAL MAN-HOURS 2.60 h
ELAPSED TIME (HOURS) 1.10 h

### Page 8

A350
SERVICE BULLETIN
SUMMARY
Figure ICN-A350-A-27XXP022-A-FAPE3-03ZBO-A-001-01 SHEET 1/1
REV 00 Jun 06/18 A350-27-P022General Overview
Page 8
CONF ALL
J. GENERAL OVERVIEW
CONF ALL
FR60 FR61FR62
A
B
FR74
FR35
Z197
Z198
A
LH SHOWN
RH SYMMETRICAL
LH
RH
INSPECTION OF EACH JUNCTION AT FLAP
TORQUE-SHAFT 2 FOR MISSING TORQUE
MARKINGS ON THE NUTS, UNTORQUED
B
 NUTS AND/OR MISSING BOLTS
ICN-A350-A-27XXP022-A-FAPE3-03ZBO-A-001-01

### Page 9

A350
SERVICE BULLETIN
SUMMARY
Figure ICN-A350-A-27XXP022-A-FAPE3-03ZBP-A-001-01 SHEET 1/1
REV 00 Jun 06/18 A350-27-P022General Overview
Page 9
K. GENERAL OVERVIEW
CONF ALL
A
FR44
FR46
B
B
LH SHOWN
RH SYMMETRICAL
INSPECTION OF EACH JUNCTION AT SLAT
TORQUE-SHAFT 2 FOR MISSING TORQUE
MARKINGS ON THE NUTS, UNTORQUED
 NUTS AND/OR MISSING BOLTS
FR35
FR74
Z193
Z194
LH
RH
A
ICN-A350-A-27XXP022-A-FAPE3-03ZBP-A-001-01

### Page 10

A350
SERVICE BULLETIN
SUMMARY
Figure ICN-A350-A-27XXP022-A-FAPE3-03ZBQ-A-002-01 SHEET 1/1
REV 00 Jun 06/18 A350-27-P022General Overview
Page 10
L. GENERAL OVERVIEW
CONF ALL
C
B
FRONT SPAR
A
Z511
Z611
B
A
Z521
Z621
LER1
LER2
LH
RH
LH
RH
C
FRONT SPAR
HINGE
HINGE RIB1
RIB2
INSPECTION OF EACH JUNCTION AT SLAT
TORQUE-SHAFT 4 FOR MISSING TORQUE
MARKINGS ON THE NUTS, UNTORQUED
NUTS AND/OR MISSING BOLTS
LH SHOWN
RH SYMMETRICAL
ICN-A350-A-27XXP022-A-FAPE3-03ZBQ-A-002-01

### Page 11

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 11
ATA SYSTEM: 27
TITLE: FLIGHT CONTROLS - INSPECTION / CHECK FOR CORRECT SHAFT
INSTALLATION AT FLAP/SLAT JUNCTION
1. PLANNING INFORMATION
A. APPLICABILITY
(1) Models
ON A/C 0005-0051, 0053, 0054, 0056-0058, 0061, 0062, 0064, 0066-0070, 0072-0075,
0077, 0079-0082, 0084-0087, 0089, 0091-0097, 0099, 0101, 0103-0105, 0107, 0109, 0111,
0115-0117, 0120, 0122
350-941
CONF ALL
(2) Applicability by MSN
0005-0051 0053 0054 0056-0058 0061 0062 0064 0066-0070 0072-0075 0077
0079-0082 0084-0087 0089 0091-0097 0099 0101 0103-0105 0107 0109 0111
0115-0117 0120 0122
(3) MSN by configuration
CONF 001
MSN CONFIGURATION
0005 0006 0007 0008 0009 0010 0011 0012 0013 0014 0015
0016 0017 0018 0019 0020
001
CONF 002
MSN CONFIGURATION
0021 0022 0023 0024 0025 0026 0027 0028 0029 0030 0031
0032 0033 0034 0035 0036 0037 0038 0039 0040 0041 0042
0043 0044 0045 0046 0047 0048 0049 0050 0051 0053 0054
0056 0057 0058 0061 0062
002
CONF 003
MSN CONFIGURATION
0064 0066 0067 0068 0069 0070 0072 0073 0074 0075 0077
0079 0080 0081 0082 0084 0085 0086 0087 0089 0091 0092
0093 0094 0095 0096 0097 0099 0101 0103 0104 0105 0107
0109 0111 0115 0116 0117 0120 0122
003
CONF ALL
(4) Configuration definition
CONF 001
Configuration 001
Config. 001 is valid for aircraft on which MOD No. 100074L41046 is embodied,
MOD No. 107075L42353 and MOD No. 109537L41397 are not embodied.
NOTE: For further information concerning the Configuration Definition, refer to
Appendix Configuration Definition T able.
CONF 002

### Page 12

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 12
Configuration 002
Config. 002 is valid for aircraft on which MOD No. 107075L42353 is embodied,
MOD No. 100074L41046 and MOD No. 1095374L41397 are not embodied.
NOTE: For further information concerning the Configuration Definition, refer to
Appendix Configuration Definition T able.
CONF 003
Configuration 003
Config. 003 is valid for aircraft on which MOD No. 1095374L41397 is embodied,
MOD No. 100074L41046 and MOD No. 107075L42353 are not embodied.
NOTE: For further information concerning the Configuration Definition, refer to
Appendix Configuration Definition T able.
CONF ALL
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
At the opportunity of a Visual Inspection during aircraft manufacturing, untorqued nuts
at the shaft junction have been reported.
As per the design specification, no effect on the transmission operation occurs
when only one connection bolt over four is missing. Aircraft systems are designed to
stop and hold the slat and flap surface in position in the case of a single flap or slat
transmission disconnection. In the case of further unexpected independent failure
and two connecting parts are missing or not torqued correctly on a shaft junction, free
movement of the affected surface may be encountered.
(2) Objective/Action
This Inspection Service Bulletin requires a one time inspection on each junction of the
Flap T orque-Shaft 2, the Slat T orque-Shaft 2 and the Slat T orque-Shaft 4 to ensure that
on each potentially affected shaft junction, no more than one nut is found untorqued
or no more than one bolt is missing.
A correctly torqued bolt is identified by confirming an intact torque marking (red line
on the bolt).
Depending on any findings, torque the affected nut(s) or remove and reinstall the
Line-Replaceable Unit (LRU).
(3) Advantages
The accomplishment of this Service Bulletin will ensure detection and/or prevention of
possible damage at an early stage and will avoid expensive repairs.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
T o accomplish this Service Bulletin it is necessary to:
(1) Inspection
(a) T ask set A350-A-27-XX-P022-01000-93BA-A Inspection

### Page 13

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 13
1 Do a Detailed Inspection of each junction at the Flap T orque-Shaft 2, the
Slat T orque-Shaft 2 and the Slat T orque-Shaft 4
CONF 001
2 Depending on the Inspection Results, Replace the Flap T orque-Shaft
Assembly 2 Left Hand (LH) side (5004CV)
CONF 002
2 Depending on the Inspection Results, Replace the Flap T orque-Shaft
Assembly 2 Left Hand (LH) side (5004CV)
CONF 003
2 Depending on the Inspection Results, Replace the Flap T orque-Shaft
Assembly 2 Left Hand (LH) side (5004CV)
CONF 001
3 Depending on the Inspection Results, Replace the Flap T orque-Shaft
Assembly 2 Right Hand (RH) side (5104CV)
CONF 002
3 Depending on the Inspection Results, Replace the Flap T orque-Shaft
Assembly 2 Right Hand (RH) side (5104CV)
CONF 003
3 Depending on the Inspection Results, Replace the Flap T orque-Shaft
Assembly 2 Right Hand (RH) side (5104CV)
CONF ALL
4 Depending on the Inspection Results, Replace the Slat T orque-Shaft
Assembly 2 LH side (5006CW)
5 Depending on the Inspection Results, Replace the Slat T orque-Shaft
Assembly 2 RH side (5106CW)
6 Depending on the Inspection Results, Replace the Slat T orque-Shaft
Assembly 4 LH side (5010CW)
7 Depending on the Inspection Results, Replace the Slat T orque-Shaft
Assembly 4 RH side (5110CW)
(2) Repair
(a) T ask set A350-A-27-XX-P022-01000-93CA-A Repair
CONF 001
1 Depending on the Inspection Results, Install the missing bolt at the Flap
T orque-Shaft Assembly 2 LH side (5004CV)
CONF 002
1 Depending on the Inspection Results, Install the missing bolt at the Flap
T orque-Shaft Assembly 2 LH side (5004CV)
CONF 003
1 Depending on the Inspection Results, Install the missing bolt at the Flap
T orque-Shaft Assembly 2 LH side (5004CV)
CONF 001
2 Depending on the Inspection Results, Install the missing bolt at the Flap
T orque-Shaft Assembly 2 RH side (5104CV)
CONF 002
2 Depending on the Inspection Results, Install the missing bolt at the Flap
T orque-Shaft Assembly 2 RH side (5104CV)
CONF 003

### Page 14

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 14
2 Depending on the Inspection Results, Install the missing bolt at the Flap
T orque-Shaft Assembly 2 RH side (5104CV)
CONF ALL
3 Depending on the Inspection Results, Install the missing bolt at the Slat
T orque-Shaft Assembly 2 LH side (5006CW)
4 Depending on the Inspection Results, Install the missing bolt at the Slat
T orque-Shaft Assembly 2 RH side (5106CW)
5 Depending on the Inspection Results, Install the missing bolt at the Slat
T orque-Shaft Assembly 4 LH side (5010CW)
6 Depending on the Inspection Results, Install the missing bolt at the Slat
T orque-Shaft Assembly 4 RH side (5110CW)
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
This Service Bulletin has been classified Mandatory. It is expected that an
Airworthiness Directive (AD) published by the European Aviation Safety Agency (EASA)
will be issued to confirm this classification. It is anticipated that the AD will confirm
the thresholds given but reference should be made to the AD for confirmation of the
mandated accomplishment timescale.
Accomplishment of this Service Bulletin must be done as specified in the compliance
table below:
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL
All aircraft Inspect each
junction at the
Flap T orque-Shaft
Assembly 2, the
Slat T orque-
Shaft Assembly
2 and the Slat
T orque-Shaft
Assembly 4 for
missing torque
markings on the
nut(s), untorqued
nut(s) and/or
missing bolt(s).
Within 6
month(s)
None None
If more than one
bolt is missing or
more than one
nut is untorqued
Replace the
affected T orque-
Shaft Assembly
in accordance
with Ref. T ask A
350-A-27-XX-P0
22-03ZZZ-920Z-
A and/or Ref. T ask
A350-A-27-XX-P0
22-04ZZZ-920Z-
A and/or Ref. T ask
Before next flight None None

### Page 15

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 15
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL
A350-A-27-XX-P0
22-05ZZZ-920Z-
A and/or Ref. T ask
A350-A-27-XX-
P022-06ZZZ-92
0Z-A and/or Ref.
T ask A350-A-2
7-XX-P022-01Z
ZZ-920Z-A and/
or Ref. T ask A3
50-A-27-XX-P02
2-02ZZZ-920Z-A
If only one
bolt is missing
Ensure that the
correct torque
values have
been applied on
the remaining
connecting parts
and replace the
affected bolt in
accordance with
Ref. T ask set A3
50-A-27-XX-P02
2-01ZZZ-93CZ-A
At the next
convenient
opportunity
not exceeding
3 months
None None
If no bolt(s)
is(are) missing
but there
is(are) missing
torque red line
marking(s) (to
indicate if the
nut(s) has(have)
been torqued)
on the nut(s)
or only one nut
is untorqued
Ensure that the
correct torque
values have been
applied on all
the connecting
parts and apply
the torque red
line markings
on the nut(s)
None None None
If no missing
torque red line
markings on
the nut(s) or no
nut(s) is(are)
untorqued
No further action None None None
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organisation Approval No. EASA.21J.031.
If an aircraft listed in the applicability has a modification or repair embodied that is not
of AIRBUS origin, and which affects the content of this Service Bulletin, the operator
is responsible for obtaining approval by its airworthiness authority for any adaptation
necessary before incorporation of the Service Bulletin.
G. MANPOWER

### Page 16

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 16
CONF 001
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Inspection
(a) T ask set A350-A-27-XX-P022-01000-93BA-A Inspection
PREPARATION
Job Set-up 1.00 h
PROCEDURE
Do a Detailed Inspection of each junction at the Flap
T orque-Shaft 2, the Slat T orque-Shaft 2 and the Slat T orque-
Shaft 4
0.50 h
Depending on the Inspection Results, Replace the Flap
T orque-Shaft Assembly 2 Left Hand (LH) side (5004CV)
1.50 h
Depending on the Inspection Results, Replace the Flap
T orque-Shaft Assembly 2 Right Hand (RH) side (5104CV)
1.50 h
Depending on the Inspection Results, Replace the Slat
T orque-Shaft Assembly 2 LH side (5006CW)
1.50 h
Depending on the Inspection Results, Replace the Slat
T orque-Shaft Assembly 2 RH side (5106CW)
1.50 h
Depending on the Inspection Results, Replace the Slat
T orque-Shaft Assembly 4 LH side (5010CW)
1.50 h
Depending on the Inspection Results, Replace the Slat
T orque-Shaft Assembly 4 RH side (5110CW)
1.50 h
PREPARATION FOR TEST
None
TEST
T est 0.50 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 12.00 h
ELAPSED TIME (HOURS) 2.50 h
NOTE: For an explanation of the man-hours and elapsed time, refer to the
Gantt Chart given in Appendix Manpower Gantt Chart - Inspection.
NOTE: The minimum man-hours necessary to accomplish this Service Bulletin
are those for the Inspection. Depending on the inspection result,
additional man-hours can apply.
(2) Repair
(a) T ask set A350-A-27-XX-P022-01000-93CA-A Repair
PREPARATION
Job-Setup 1.00 h
PROCEDURE

### Page 17

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 17
Depending on the Inspection Results, Install the missing
bolt at the Flap T orque-Shaft Assembly 2 LH side (5004CV)
0.10 h
Depending on the Inspection Results, Install the missing
bolt at the Flap T orque-Shaft Assembly 2 RH side (5104CV)
0.10 h
Depending on the Inspection Results, Install the missing
bolt at the Slat T orque-Shaft Assembly 2 LH side (5006CW)
0.10 h
Depending on the Inspection Results, Install the missing
bolt at the Slat T orque-Shaft Assembly 2 RH side (5106CW)
0.10 h
Depending on the Inspection Results, Install the missing
bolt at the Slat T orque-Shaft Assembly 4 LH side (5010CW)
0.10 h
Depending on the Inspection Results, Install the missing
bolt at the Slat T orque-Shaft Assembly 4 RH side (5110CW)
0.10 h
PREPARATION FOR TEST
None
TEST
None
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 2.60 h
ELAPSED TIME (HOURS) 1.10 h
NOTE: For an explanation of the man-hours and elapsed time, refer to the
Gantt Chart given in Appendix Manpower Gantt Chart - Repair.
CONF 002
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Inspection
(a) T ask set A350-A-27-XX-P022-01000-93BA-A Inspection
PREPARATION
Job Set-up 1.00 h
PROCEDURE
Do a Detailed Inspection of each junction at the Flap
T orque-Shaft 2, the Slat T orque-Shaft 2 and the Slat T orque-
Shaft 4
0.50 h
Depending on the Inspection Results, Replace the Flap
T orque-Shaft Assembly 2 Left Hand (LH) side (5004CV)
1.50 h
Depending on the Inspection Results, Replace the Flap
T orque-Shaft Assembly 2 Right Hand (RH) side (5104CV)
1.50 h
Depending on the Inspection Results, Replace the Slat
T orque-Shaft Assembly 2 LH side (5006CW)
1.50 h
Depending on the Inspection Results, Replace the Slat
T orque-Shaft Assembly 2 RH side (5106CW)
1.50 h

### Page 18

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 18
Depending on the Inspection Results, Replace the Slat
T orque-Shaft Assembly 4 LH side (5010CW)
1.50 h
Depending on the Inspection Results, Replace the Slat
T orque-Shaft Assembly 4 RH side (5110CW)
1.50 h
PREPARATION FOR TEST
None
TEST
T est 0.50 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 12.00 h
ELAPSED TIME (HOURS) 2.50 h
NOTE: For an explanation of the man-hours and elapsed time, refer to the
Gantt Chart given in Appendix Manpower Gantt Chart - Inspection.
NOTE: The minimum man-hours necessary to accomplish this Service Bulletin
are those for the Inspection. Depending on the inspection result,
additional man-hours can apply.
(2) Repair
(a) T ask set A350-A-27-XX-P022-01000-93CA-A Repair
PREPARATION
Job-Setup 1.00 h
PROCEDURE
Depending on the Inspection Results, Install the missing
bolt at the Flap T orque-Shaft Assembly 2 LH side (5004CV)
0.10 h
Depending on the Inspection Results, Install the missing
bolt at the Flap T orque-Shaft Assembly 2 RH side (5104CV)
0.10 h
Depending on the Inspection Results, Install the missing
bolt at the Slat T orque-Shaft Assembly 2 LH side (5006CW)
0.10 h
Depending on the Inspection Results, Install the missing
bolt at the Slat T orque-Shaft Assembly 2 RH side (5106CW)
0.10 h
Depending on the Inspection Results, Install the missing
bolt at the Slat T orque-Shaft Assembly 4 LH side (5010CW)
0.10 h
Depending on the Inspection Results, Install the missing
bolt at the Slat T orque-Shaft Assembly 4 RH side (5110CW)
0.10 h
PREPARATION FOR TEST
None
TEST
None
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 2.60 h
ELAPSED TIME (HOURS) 1.10 h

### Page 19

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 19
NOTE: For an explanation of the man-hours and elapsed time, refer to the
Gantt Chart given in Appendix Manpower Gantt Chart - Repair.
CONF 003
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Inspection
(a) T ask set A350-A-27-XX-P022-01000-93BA-A Inspection
PREPARATION
Job Set-up 1.00 h
PROCEDURE
Do a Detailed Inspection of each junction at the Flap
T orque-Shaft 2, the Slat T orque-Shaft 2 and the Slat T orque-
Shaft 4
0.50 h
Depending on the Inspection Results, Replace the Flap
T orque-Shaft Assembly 2 Left Hand (LH) side (5004CV)
1.50 h
Depending on the Inspection Results, Replace the Flap
T orque-Shaft Assembly 2 Right Hand (RH) side (5104CV)
1.50 h
Depending on the Inspection Results, Replace the Slat
T orque-Shaft Assembly 2 LH side (5006CW)
1.50 h
Depending on the Inspection Results, Replace the Slat
T orque-Shaft Assembly 2 RH side (5106CW)
1.50 h
Depending on the Inspection Results, Replace the Slat
T orque-Shaft Assembly 4 LH side (5010CW)
1.50 h
Depending on the Inspection Results, Replace the Slat
T orque-Shaft Assembly 4 RH side (5110CW)
1.50 h
PREPARATION FOR TEST
None
TEST
T est 0.50 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 12.00 h
ELAPSED TIME (HOURS) 2.50 h
NOTE: For an explanation of the man-hours and elapsed time, refer to the
Gantt Chart given in Appendix Manpower Gantt Chart - Inspection.
NOTE: The minimum man-hours necessary to accomplish this Service Bulletin
are those for the Inspection. Depending on the inspection result,
additional man-hours can apply.
(2) Repair

### Page 20

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 20
(a) T ask set A350-A-27-XX-P022-01000-93CA-A Repair
PREPARATION
Job-Setup 1.00 h
PROCEDURE
Depending on the Inspection Results, Install the missing
bolt at the Flap T orque-Shaft Assembly 2 LH side (5004CV)
0.10 h
Depending on the Inspection Results, Install the missing
bolt at the Flap T orque-Shaft Assembly 2 RH side (5104CV)
0.10 h
Depending on the Inspection Results, Install the missing
bolt at the Slat T orque-Shaft Assembly 2 LH side (5006CW)
0.10 h
Depending on the Inspection Results, Install the missing
bolt at the Slat T orque-Shaft Assembly 2 RH side (5106CW)
0.10 h
Depending on the Inspection Results, Install the missing
bolt at the Slat T orque-Shaft Assembly 4 LH side (5010CW)
0.10 h
Depending on the Inspection Results, Install the missing
bolt at the Slat T orque-Shaft Assembly 4 RH side (5110CW)
0.10 h
PREPARATION FOR TEST
None
TEST
None
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 2.60 h
ELAPSED TIME (HOURS) 1.10 h
NOTE: For an explanation of the man-hours and elapsed time, refer to the
Gantt Chart given in Appendix Manpower Gantt Chart - Repair.
CONF ALL
H. WEIGHT AND BALANCE
Not changed
I. ELECTRICAL LOAD DATA
Not changed
J. REFERENCES
CONF 001
(1) Inspection
(a) T ask set A350-A-27-XX-P022-01000-93BA-A Inspection
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-42-XX-01ZZZ-667Z-A
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-6X-XX-11ZZZ-018Z-D

### Page 21

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 21
MAINTENANCE PROCEDURE (MP)
A350-A-20-51-50-01ZZZ-25BZ-A
A350-A-20-51-50-04ZZZ-25BZ-A
A350-A-24-41-XX-00ZZZ-170Z-A
A350-A-27-54-62-00ZZZ-520Z-A
A350-A-27-54-62-00ZZZ-720Z-A
A350-A-27-84-62-00ZZZ-520Z-A
A350-A-27-84-62-00ZZZ-720Z-A
SYSTEM DESCRIPTION (SD)
A350-A-06-2X-XX-01ZZZ-04CZ-A A350-A-06-3X-XX-01ZZZ-04CZ-A
A350-A-06-4X-XX-01ZZZ-04CZ-A
STANDARDS MANUAL (SM)
(2) Repair
(a) T ask set A350-A-27-XX-P022-01000-93CA-A Repair
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-42-XX-01ZZZ-667Z-A
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-6X-XX-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP)
A350-A-20-51-50-01ZZZ-25BZ-A
A350-A-20-51-50-04ZZZ-25BZ-A
A350-A-24-41-XX-00ZZZ-170Z-A
A350-A-27-54-62-00ZZZ-520Z-A
A350-A-27-54-62-00ZZZ-720Z-A
A350-A-27-84-62-00ZZZ-520Z-A
A350-A-27-84-62-00ZZZ-720Z-A
SYSTEM DESCRIPTION (SD)
A350-A-06-2X-XX-01ZZZ-04CZ-A A350-A-06-4X-XX-01ZZZ-04CZ-A
STANDARDS MANUAL (SM)
CONF 002
(1) Inspection
(a) T ask set A350-A-27-XX-P022-01000-93BA-A Inspection
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-42-XX-01ZZZ-667Z-A
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-6X-XX-11ZZZ-018Z-D

### Page 22

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 22
MAINTENANCE PROCEDURE (MP)
A350-A-20-51-50-01ZZZ-25BZ-A
A350-A-20-51-50-04ZZZ-25BZ-A
A350-A-24-41-XX-00ZZZ-170Z-A
A350-A-27-54-62-00ZZZ-520Z-A
A350-A-27-54-62-00ZZZ-720Z-A
A350-A-27-84-62-00ZZZ-520Z-A
A350-A-27-84-62-00ZZZ-720Z-A
SYSTEM DESCRIPTION (SD)
A350-A-06-2X-XX-01ZZZ-04CZ-A A350-A-06-3X-XX-01ZZZ-04CZ-A
A350-A-06-4X-XX-01ZZZ-04CZ-A
STANDARDS MANUAL (SM)
(2) Repair
(a) T ask set A350-A-27-XX-P022-01000-93CA-A Repair
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-42-XX-01ZZZ-667Z-A
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-6X-XX-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP)
A350-A-20-51-50-01ZZZ-25BZ-A
A350-A-20-51-50-04ZZZ-25BZ-A
A350-A-24-41-XX-00ZZZ-170Z-A
A350-A-27-54-62-00ZZZ-520Z-A
A350-A-27-54-62-00ZZZ-720Z-A
A350-A-27-84-62-00ZZZ-520Z-A
A350-A-27-84-62-00ZZZ-720Z-A
SYSTEM DESCRIPTION (SD)
A350-A-06-2X-XX-01ZZZ-04CZ-A A350-A-06-4X-XX-01ZZZ-04CZ-A
STANDARDS MANUAL (SM)
CONF 003
(1) Inspection
(a) T ask set A350-A-27-XX-P022-01000-93BA-A Inspection
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-42-XX-01ZZZ-667Z-A
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-6X-XX-11ZZZ-018Z-D

### Page 23

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 23
MAINTENANCE PROCEDURE (MP)
A350-A-20-51-50-01ZZZ-25BZ-A
A350-A-20-51-50-04ZZZ-25BZ-A
A350-A-24-41-XX-00ZZZ-170Z-A
A350-A-27-54-62-00ZZZ-520Z-A
A350-A-27-54-62-00ZZZ-720Z-A
A350-A-27-84-62-00ZZZ-520Z-A
A350-A-27-84-62-00ZZZ-720Z-A
SYSTEM DESCRIPTION (SD)
A350-A-06-2X-XX-01ZZZ-04CZ-A A350-A-06-3X-XX-01ZZZ-04CZ-A
A350-A-06-4X-XX-01ZZZ-04CZ-A
STANDARDS MANUAL (SM)
(2) Repair
(a) T ask set A350-A-27-XX-P022-01000-93CA-A Repair
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-42-XX-01ZZZ-667Z-A
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-6X-XX-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP)
A350-A-20-51-50-01ZZZ-25BZ-A
A350-A-20-51-50-04ZZZ-25BZ-A
A350-A-24-41-XX-00ZZZ-170Z-A
A350-A-27-54-62-00ZZZ-520Z-A
A350-A-27-54-62-00ZZZ-720Z-A
A350-A-27-84-62-00ZZZ-520Z-A
A350-A-27-84-62-00ZZZ-720Z-A
SYSTEM DESCRIPTION (SD)
A350-A-06-2X-XX-01ZZZ-04CZ-A A350-A-06-4X-XX-01ZZZ-04CZ-A
STANDARDS MANUAL (SM)
CONF ALL
K. PUBLICATION AFFECTED
None
L. INDUSTRY SUPPORT INFORMATION
AIRBUS will credit the man hours indicated in this Service Bulletin at the agreed in-house
warranty labor rate for claims received no later than 90 days after completion of the last
affected aircraft of your fleet, for the accomplishment of this Service Bulletin before Dec
31/18 or within 6 months after the issue date of the Service Bulletin.
In case of findings, AIRBUS will share the costs of accomplishment of this Service Bulletin by
crediting the operator supplied AIRBUS parts for orders placed before Dec 31/18 or within 6
months after the initial issue date of the Service Bulletin. Claims for this allowance should
be received no later than 90 days after completion of the last affected aircraft of your fleet.
This Service Bulletin is the subject of an AIRBUS monitored retrofit campaign.

### Page 24

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 24
For the organization of this retrofit, you are kindly requested to contact AIRBUS retrofit
management department: monitored.retrofit@airbus.com.
Industry support terms for the equipment must be negotiated with the equipment supplier.

### Page 25

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 25
2. MATERIAL INFORMATION
A. MATERIAL APPLICABILITY
CONF 001
Material for task set A350-A-27-XX-P022-01000-93BA-A Inspection
MATERIAL QTY SEE NOTES
Referenced tools See SB
Equipment See SB
Material for task set A350-A-27-XX-P022-01000-93CA-A Repair
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
Equipment See SB
CONF 002
Material for task set A350-A-27-XX-P022-01000-93BA-A Inspection
MATERIAL QTY SEE NOTES
Referenced tools See SB
Equipment See SB
Material for task set A350-A-27-XX-P022-01000-93CA-A Repair
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
Equipment See SB
CONF 003
Material for task set A350-A-27-XX-P022-01000-93BA-A Inspection
MATERIAL QTY SEE NOTES
Referenced tools See SB
Equipment See SB
Material for task set A350-A-27-XX-P022-01000-93CA-A Repair
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
Equipment See SB
CONF ALL
B. TOOLING
CONF 001
Referenced tools for task set A350-A-27-XX-P022-01000-93BA-A Inspection
NOTE: T o accomplish this Service Bulletin, it is necessary to use the tools listed in the
subsequent referenced tasks:
Ref. MP A350-A-27-54-62-00ZZZ-520Z-A

### Page 26

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 26
Ref. MP A350-A-27-84-62-00ZZZ-520Z-A
Ref. MP A350-A-27-54-62-00ZZZ-720Z-A
Ref. MP A350-A-27-84-62-00ZZZ-720Z-A
Referenced tools for task set A350-A-27-XX-P022-01000-93CA-A Repair
NOTE: T o accomplish this Service Bulletin, it is necessary to use the tools listed in the
subsequent referenced tasks:
Ref. MP A350-A-27-54-62-00ZZZ-520Z-A
Ref. MP A350-A-27-84-62-00ZZZ-520Z-A
Ref. MP A350-A-27-54-62-00ZZZ-720Z-A
Ref. MP A350-A-27-84-62-00ZZZ-720Z-A
CONF 002
Referenced tools for task set A350-A-27-XX-P022-01000-93BA-A Inspection
NOTE: T o accomplish this Service Bulletin, it is necessary to use the tools listed in the
subsequent referenced tasks:
Ref. MP A350-A-27-54-62-00ZZZ-520Z-A
Ref. MP A350-A-27-84-62-00ZZZ-520Z-A
Ref. MP A350-A-27-54-62-00ZZZ-720Z-A
Ref. MP A350-A-27-84-62-00ZZZ-720Z-A
Referenced tools for task set A350-A-27-XX-P022-01000-93CA-A Repair
NOTE: T o accomplish this Service Bulletin, it is necessary to use the tools listed in the
subsequent referenced tasks:
Ref. MP A350-A-27-54-62-00ZZZ-520Z-A
Ref. MP A350-A-27-84-62-00ZZZ-520Z-A
Ref. MP A350-A-27-54-62-00ZZZ-720Z-A
Ref. MP A350-A-27-84-62-00ZZZ-720Z-A
CONF 003
Referenced tools for task set A350-A-27-XX-P022-01000-93BA-A Inspection
NOTE: T o accomplish this Service Bulletin, it is necessary to use the tools listed in the
subsequent referenced tasks:
Ref. MP A350-A-27-54-62-00ZZZ-520Z-A
Ref. MP A350-A-27-84-62-00ZZZ-520Z-A
Ref. MP A350-A-27-54-62-00ZZZ-720Z-A
Ref. MP A350-A-27-84-62-00ZZZ-720Z-A
Referenced tools for task set A350-A-27-XX-P022-01000-93CA-A Repair
NOTE: T o accomplish this Service Bulletin, it is necessary to use the tools listed in the
subsequent referenced tasks:
Ref. MP A350-A-27-54-62-00ZZZ-520Z-A
Ref. MP A350-A-27-84-62-00ZZZ-520Z-A
Ref. MP A350-A-27-54-62-00ZZZ-720Z-A
Ref. MP A350-A-27-84-62-00ZZZ-720Z-A

### Page 27

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 27
CONF ALL
C. CONSUMABLES
CONF 001
Consumables for task set A350-A-27-XX-P022-01000-93CA-A Repair
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
12AEB1
Corrosion Preventive
Compound - Heavy Duty
Long Durability Hard Film
CONF 002
Consumables for task set A350-A-27-XX-P022-01000-93CA-A Repair
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
12AEB1
Corrosion Preventive
Compound - Heavy Duty
Long Durability Hard Film
CONF 003
Consumables for task set A350-A-27-XX-P022-01000-93CA-A Repair
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
12AEB1
Corrosion Preventive
Compound - Heavy Duty
Long Durability Hard Film
CONF ALL
D. LIST OF NEW PARTS
CONF 001
Equipment for task set A350-A-27-XX-P022-01000-93BA-A Inspection
Procurement address
25218
MOOG AIRCRAFT GROUP TORRANCE OPERATIONS
20263 S WESTERN AVENUE
90501-1310 TORRANCE
USA
Phone: +1 310 618 7486
Fax: +1 310 618 6660
21100
LIEBHERR-AEROSPACE LINDENBERG GMBH
CUSTOMER SERVICE DEPARTMENT
PFAENDERSTR. 50-52
88161 LINDENBERG
Germany
Phone: +49 08381460
Fax: +49 08381464377
NOTE(S)
Vendor parts are to be procured from the address given above.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
1 CA96779-001(25218) 2 SHAFT (1) (2) (3)(4)
7 4784A0200-02(21100) 2 SHAFT (1) (2) (3)(4)

### Page 28

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 28
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
9 4784A0400-02(21100) 2 SHAFT (1) (2) (3)(4)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Procurement terms for the equipment must be negotiated with the equipment
supplier.
(3): The components listed above are only necessary if the bolt(s) or screw(s) is(are)
missing at the Shaft Assembly. The quantity of these items are to be ordered as
required.
(4): For the Part Numbers (P/N) that belong to the supplier “MOOG”, operators can opt for
an alternative P/N (if any) given in the Maintenance Illustration Part Data (MIPD).
Equipment for task set A350-A-27-XX-P022-01000-93CA-A Repair
Procurement address
25218
MOOG AIRCRAFT GROUP TORRANCE OPERATIONS
20263 S WESTERN AVENUE
90501-1310 TORRANCE
USA
Phone: +1 310 618 7486
Fax: +1 310 618 6660
21100
LIEBHERR-AEROSPACE LINDENBERG GMBH
CUSTOMER SERVICE DEPARTMENT
PFAENDERSTR. 50-52
88161 LINDENBERG
Germany
Phone: +49 08381460
Fax: +49 08381464377
NOTE(S)
Vendor parts are to be procured from the address given above.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
2 CB02842-001(25218) 2 BOLT (1) (2) (3)(4)
3 NAS1805-4 (25218)(21100) 6 NUT (1) (2) (3)(4)
8 4784-0030 (21100) 2 SCREW (1) (2) (3)(4)
10 4784-0029 (21100) 2 SCREW (1) (2) (3)(4)
NOTE(S)
Refer to the AIRBUS Ref. SM if you find part numbers of hardware components in the
related kit(s) which you cannot identify in the LIST OF COMPONENTS of this Service
Bulletin. The SM will give you the correct part number to part number relationship.
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Procurement terms for the equipment must be negotiated with the equipment
supplier.

### Page 29

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 29
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
(3): The components listed above are only necessary if the bolt(s) or screw(s) is(are)
missing at the Shaft Assembly. The quantity of these items are to be ordered as
required.
(4): For the Part Numbers (P/N) that belong to the supplier “MOOG”, operators can opt for
an alternative P/N (if any) given in the Maintenance Illustration Part Data (MIPD).
CONF 002
Equipment for task set A350-A-27-XX-P022-01000-93BA-A Inspection
Procurement address
25218
MOOG AIRCRAFT GROUP TORRANCE OPERATIONS
20263 S WESTERN AVENUE
90501-1310 TORRANCE
USA
Phone: +1 310 618 7486
Fax: +1 310 618 6660
21100
LIEBHERR-AEROSPACE LINDENBERG GMBH
CUSTOMER SERVICE DEPARTMENT
PFAENDERSTR. 50-52
88161 LINDENBERG
Germany
Phone: +49 08381460
Fax: +49 08381464377
NOTE(S)
Vendor parts are to be procured from the address given above.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
4 CA96779-002(25218) 2 SHAFT (1) (2) (3)(4)
7 4784A0200-02(21100) 2 SHAFT (1) (2) (3)(4)
9 4784A0400-02(21100) 2 SHAFT (1) (2) (3)(4)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Procurement terms for the equipment must be negotiated with the equipment
supplier.
(3): The components listed above are only necessary if the bolt(s) or screw(s) is(are)
missing at the Shaft Assembly. The quantity of these items are to be ordered as
required.
(4): For the Part Numbers (P/N) that belong to the supplier “MOOG”, operators can opt for
an alternative P/N (if any) given in the Maintenance Illustration Part Data (MIPD).
Equipment for task set A350-A-27-XX-P022-01000-93CA-A Repair
Procurement address 25218
MOOG AIRCRAFT GROUP TORRANCE OPERATIONS
20263 S WESTERN AVENUE
90501-1310 TORRANCE
USA
Phone: +1 310 618 7486
Fax: +1 310 618 6660

### Page 30

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 30
21100
LIEBHERR-AEROSPACE LINDENBERG GMBH
CUSTOMER SERVICE DEPARTMENT
PFAENDERSTR. 50-52
88161 LINDENBERG
Germany
Phone: +49 08381460
Fax: +49 08381464377
NOTE(S)
Vendor parts are to be procured from the address given above.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
2 CB02842-001(25218) 2 BOLT (1) (2) (3)(4)
3 NAS1805-4 (25218)(21100) 6 NUT (1) (2) (3)(4)
8 4784-0030 (21100) 2 SCREW (1) (2) (3)(4)
10 4784-0029 (21100) 2 SCREW (1) (2) (3)(4)
NOTE(S)
Refer to the AIRBUS Ref. SM if you find part numbers of hardware components in the
related kit(s) which you cannot identify in the LIST OF COMPONENTS of this Service
Bulletin. The SM will give you the correct part number to part number relationship.
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Procurement terms for the equipment must be negotiated with the equipment
supplier.
(3): The components listed above are only necessary if the bolt(s) or screw(s) is(are)
missing at the Shaft Assembly. The quantity of these items are to be ordered as
required.
(4): For the Part Numbers (P/N) that belong to the supplier “MOOG”, operators can opt for
an alternative P/N (if any) given in the Maintenance Illustration Part Data (MIPD).
CONF 003
Equipment for task set A350-A-27-XX-P022-01000-93BA-A Inspection
Procurement address
25218
MOOG AIRCRAFT GROUP TORRANCE OPERATIONS
20263 S WESTERN AVENUE
90501-1310 TORRANCE
USA
Phone: +1 310 618 7486
Fax: +1 310 618 6660
21100
LIEBHERR-AEROSPACE LINDENBERG GMBH
CUSTOMER SERVICE DEPARTMENT
PFAENDERSTR. 50-52
88161 LINDENBERG
Germany
Phone: +49 08381460
Fax: +49 08381464377
NOTE(S)
Vendor parts are to be procured from the address given above.

### Page 31

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 31
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
5 CA96779-003(25218) 2 SHAFT (1) (2) (3)(4)
7 4784A0200-02(21100) 2 SHAFT (1) (2) (3)(4)
9 4784A0400-02(21100) 2 SHAFT (1) (2) (3)(4)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Procurement terms for the equipment must be negotiated with the equipment
supplier.
(3): The components listed above are only necessary if the bolt(s) or screw(s) is(are)
missing at the Shaft Assembly. The quantity of these items are to be ordered as
required.
(4): For the Part Numbers (P/N) that belong to the supplier “MOOG”, operators can opt for
an alternative P/N (if any) given in the Maintenance Illustration Part Data (MIPD).
Equipment for task set A350-A-27-XX-P022-01000-93CA-A Repair
Procurement address
25218
MOOG AIRCRAFT GROUP TORRANCE OPERATIONS
20263 S WESTERN AVENUE
90501-1310 TORRANCE
USA
Phone: +1 310 618 7486
Fax: +1 310 618 6660
21100
LIEBHERR-AEROSPACE LINDENBERG GMBH
CUSTOMER SERVICE DEPARTMENT
PFAENDERSTR. 50-52
88161 LINDENBERG
Germany
Phone: +49 08381460
Fax: +49 08381464377
NOTE(S)
Vendor parts are to be procured from the address given above.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
2 CB02842-001(25218) 2 BOLT (1) (2) (3)(4)
3 NAS1805-4 (21100)(25218) 8 NUT (1) (2) (3)(4)
6 CB02842-002(25218) 2 BOLT (1) (2) (3)(4)
8 4784-0030 (21100) 2 SCREW (1) (2) (3)(4)
10 4784-0029 (21100) 2 SCREW (1) (2) (3)(4)
NOTE(S)
Refer to the AIRBUS Ref. SM if you find part numbers of hardware components in the
related kit(s) which you cannot identify in the LIST OF COMPONENTS of this Service
Bulletin. The SM will give you the correct part number to part number relationship.

### Page 32

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 32
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Procurement terms for the equipment must be negotiated with the equipment
supplier.
(3): The components listed above are only necessary if the bolt(s) or screw(s) is(are)
missing at the Shaft Assembly. The quantity of these items are to be ordered as
required.
(4): For the Part Numbers (P/N) that belong to the supplier “MOOG”, operators can opt for
an alternative P/N (if any) given in the Maintenance Illustration Part Data (MIPD).
CONF ALL
E. LIST OF EXISTING PARTS
No parts

### Page 33

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 33
3. ACCOMPLISHMENT INSTRUCTIONS
Task set A350-A-27-XX-P022-01000-93BA-A
Inspection
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL
WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND MECHANICALLY
SERVICEABLE). WHEN YOU DO MAINTENANCE WORK, REPAIRS OR
MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND
THE WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING OR COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND
DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO Ref. ESP A350-A-20-55-
XX-01ZZZ-042Z-A.
NOTE: The accomplishment instructions of this Service Bulletin include procedures given in
other documents or in other sections of the Service Bulletin. When the words “refer to”
are used and the operator has a procedure accepted by the local authority he belongs to,
the accepted alternative procedure can be used. When the words “in accordance with”
are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service Bulletin.
Operators can therefore, as deemed necessary, omit or add access and/or close-up steps
to add flexibility to their maintenance operations as long as the technical intent of the
Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms. Refer
to paragraph 1.J., References, for the definition of acronyms.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance necessary
to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, including RC paragraph contained herein, contact
AIRBUS for further instructions and approval.
NOTE: This Service Bulletin is classified mandatory or expected to be classified mandatory by
an Airworthiness Directive (AD). The paragraphs 3.C. and 3.E. in these accomplishment
instructions are Required for Compliance (RC) and must be done to comply with the AD.
T o allow more flexibility, the rule "refer to" and "in accordance with" will apply to these
paragraphs 3.C. and 3.E. Other paragraphs are recommended and may be deviated from,
done as part of other actions or done with accepted methods different from those given
in the Service Bulletin, as long as the RC paragraphs can be done and the aircraft can be
put back into a serviceable condition.
NOTE: The purpose of flowcharts is to supplement the information given in the Procedure and
Compliance paragraphs and not to serve as the primary source for tasks or compliance
times given in this Service Bulletin.
NOTE: Discarded parts must be managed at the operator's discretion.

### Page 34

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 34
A. TASK SET ASSOCIATED INFORMATION
Task Manpower
CONF 001
TOTAL MAN-HOURS 12.00h
CONF 002
TOTAL MAN-HOURS 12.00h
CONF 003
TOTAL MAN-HOURS 12.00h
CONF 001
ELAPSED TIME (HOURS) 2.50h
CONF 002
ELAPSED TIME (HOURS) 2.50h
CONF 003
ELAPSED TIME (HOURS) 2.50h
CONF ALL
B. PREPARATION
(1) Task A350-A-27-XX-P022-01001-540A-A - Job Set-up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 1.00h
Minimum Number of person 2
Elapsed Time 0.50h
Referenced Information
Manuals/Drawings References/Sheets
INTRO A350-A-00-6X-XX-11ZZZ-018Z-D
MP
A350-A-24-41-XX-00ZZZ-170Z-A
A350-A-27-54-62-00ZZZ-520Z-A
A350-A-27-84-62-00ZZZ-520Z-A
Procedure
NOTE: For the basic Aircraft configuration, refer to Ref. INTRO A350-A-00-6X-
XX-11ZZZ-018Z-D “Introductions”.
(a) Make sure that the aircraft is electrically grounded, refer to Ref. MP A350-
A-24-41-XX-00ZZZ-170Z-A.
(b) Do the Job Set-up procedure as specified in the removal of the Flap T orque-
Shaft Assembly 2 ( FIN 5004CV and FIN 5104CV), refer to Ref. MP A350-
A-27-54-62-00ZZZ-520Z-A.
(c) Do the Job Set-up procedure as specified in the removal of the Slat T orque-
Shaft Assembly 2 ( FIN 5006CW and FIN 5106CW) and the Slat T orque-

### Page 35

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 35
Shaft Assembly 4 ( FIN 5010CW and FIN 5110CW), refer to Ref. MP A350-
A-27-84-62-00ZZZ-520Z-A.
C. PROCEDURE
(1) Task A350-A-27-XX-P022-01001-311A-A - Do a Detailed Inspection of each
junction at the Flap Torque-Shaft 2, the Slat Torque-Shaft 2 and the Slat
Torque-Shaft 4
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
197 Access Panel 197GL
198 Access Panel 198ZR
193 Access Panel 193CL, Panel 193DL
194 Access Panel 194ER, Panel 194FR
511 Access Panel 511AB
521 Access Panel 521BB
611 Access Panel 611AB
621 Access Panel 621BB
Manpower/Resources/Skills
Man-hours 0.50h
Minimum Number of person 2
Elapsed Time 0.25h
Skills Airframe
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-20-51-50-01ZZZ-25BZ-AA350-A-20-51-50-04ZZZ-25BZ-A
SD
A350-A-06-2X-XX-01ZZZ-04CZ-A
A350-A-06-3X-XX-01ZZZ-04CZ-A
A350-A-06-4X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. SD A350-A-06-3X-
XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-
XX-01ZZZ-04CZ-A.
3 For the identification of access panels, refer to Ref. SD A350-A-06-4X-
XX-01ZZZ-04CZ-A.
4 For standard mechanical T orques, refer to Ref. MP A350-
A-20-51-50-01ZZZ-25BZ-A.
5 For marking of the mechanical fasteners and their assemblies after
tightening to standard or specific torque values, refer to Ref. MP A350-
A-20-51-50-04ZZZ-25BZ-A.

### Page 36

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 36
(b) Inspect each junction at the Flap T orque-Shaft 2, the Slat T orque-Shaft 2
and the Slat T orque-Shaft 4 for the missing torque markings on the nut(s),
untorqued nut(s) and/or missing bolt(s) within the threshhold given in PLANNING
INFORMATION paragraph E.(2):
Refer to Ref. Fig. Location of the Work Area, Flap T orque-Shaft 2, Ref. Fig. Location
of the Work Area, Slat T orque-Shaft 2, Ref. Fig. Location of the Work Area, Slat
T orque-Shaft 4 and Ref. Fig. Flowchart.
1 If more than one bolt is missing or more than one nut is untorqued:
a Replace the affected shaft within the threshhold given in PLANNING
INFORMATION paragraph E.(2) and in accordance with:
Ref. T ask A350-A-27-XX-P022-01ZZZ-920Z-A
and/or
Ref. T ask A350-A-27-XX-P022-02ZZZ-920Z-A
and/or
Ref. T ask A350-A-27-XX-P022-03ZZZ-920Z-A
and/or
Ref. T ask A350-A-27-XX-P022-04ZZZ-920Z-A
and/or
Ref. T ask A350-A-27-XX-P022-05ZZZ-920Z-A
and/or
Ref. T ask A350-A-27-XX-P022-06ZZZ-920Z-A
2 If only one bolt is missing:
a Ensure correct torque on remaining connecting parts and Install
the missing bolt in accordance with Ref. T ask set A350-A-27-
XX-P022-01ZZZ-93CZ-A within the threshhold given in planning
information paragraph E.(2).
3 If no bolt(s) is(are) missing but there are missing torque red line marking(s)
(to indicate if the nut(s) has(have) been torqued) on the nut(s) or only one
nut is untorqued:
a Ensure that the correct torque values have been applied on all the
connecting parts and apply the torque red line markings on the
nut(s).
NOTE: T orque the nut(s) between 0.97 and 1.13 m.daN (85.84 and
100.00 lbf.in) or torque the bolt(s) 1.02 and 1.24 m.daN
(90.28 and 109.75 lbf.in).
NOTE: Apply the torque red line markings on the nut(s) across the
external threaded fastener end and onto the component.
b No further action in accordance with this Service Bulletin.
4 If no missing torque red line markings on the nut(s) or no nut(s) is(are)
untorqued:
a No further action in accordance with this Service Bulletin.

### Page 37

A350
SERVICE BULLETIN
Figure ICN-A350-A-27XXP022-A-FAPE3-03ZBX-A-001-01 SHEET 1/1
REV 00 Jun 06/18 A350-27-P022Location of the Work Area
Page 37
CONF ALL
FR60 FR61FR62
A
B
FR74
FR35
Z197
Z198
A
LH SHOWN
RH SYMMETRICAL
B
5004CV
5104CV
LH
RH
LH
RH
NOTE:
INSPECTION AREA ICN-A350-A-27XXP022-A-FAPE3-03ZBX-A-001-01

### Page 38

A350
SERVICE BULLETIN
Figure ICN-A350-A-27XXP022-A-FAPE3-03ZBY-A-001-01 SHEET 1/1
REV 00 Jun 06/18 A350-27-P022Location of the Work Area
Page 38
CONF ALL
A
FR44
FR46
B
FR35
FR74
Z193
Z194
B
NOTE:
INSPECTION AREA
LH SHOWN
RH SYMMETRICAL
5006CW LH
RH5106CW
LH
RH
A
ICN-A350-A-27XXP022-A-FAPE3-03ZBY-A-001-01

### Page 39

A350
SERVICE BULLETIN
Figure ICN-A350-A-27XXP022-A-FAPE3-03ZBZ-A-002-01 SHEET 1/1
REV 00 Jun 06/18 A350-27-P022Location of the Work Area
Page 39
CONF ALL
B
FRONT SPAR
A
Z511
Z611
B
A
Z521
Z621
FRONT SPAR
LER1
LER2
LH
RH
LH
RH
C
C
NOTE:
INSPECTION AREA
HINGE
HINGE
5010CW LH
5110CW RH
RIB1
RIB2
LH SHOWN
RH SYMMETRICAL
ICN-A350-A-27XXP022-A-FAPE3-03ZBZ-A-002-01

### Page 40

A350
SERVICE BULLETIN
Figure ICN-A350-A-27XXP022-A-FAPE3-03ZBN-A-003-01 SHEET 1/1
REV 00 Jun 06/18 A350-27-P022Flowchart
Page 40
CONF ALL
NOTE:
THE PURPOSE OF FLOWCHARTS IS TO SUPPLEMENT THE INFORMATION GIVEN IN THE PROCEDURE AND
COMPLIANCE PARAGRAPHS AND NOT TO SERVE AS THE PRIMARY SOURCE FOR TASKS OR COMPLIANCE
TIMES GIVEN IN THIS SERVICE BULLETIN.
INSPECT EACH JUNCTION AT  FLAP TORQUE-SHAFT 2,
SLAT TORQUE-SHAFT 2 AND SLAT TORQUE-SHAFT 4 FOR 
MISSING TORQUE MARKINGS ON THE NUT(S), UNTORQUED
NUT(S) AND/OR MISSING BOLT(S), WITHIN THE THRESHOLD
GIVEN IN PLANNING INFORMATION PARAGRAPH E.(2)
MORE THAN
ONE BOLT  MISSING OR
MORE THAN ONE NUT
 UNTORQUED?
IS
YES
NO
IS
ONE BOLT
MISSING? YES
NO
ENSURE THAT THE CORRECT TORQUE VALUES
HAVE BEEN APPLIED ON THE REMAINING
CONNECTING PARTS AND REPLACE THE
AFFECTED BOLT AT NEXT CONVENIENT
OPPORTUNITY IN ACCORDANCE WITH TASK
A350-A-27-XX-P022-01000-93CA-A WITHIN
THE THRESHOLD GIVEN IN PLANNING
THE TORQUE
RED LINE MARKING(S) (TO
INDICATE IF THE NUT(S) HAS (HAVE)
BEEN TORQUED) MISSING ON THE
IS (ARE)
NUT(S) OR ONLY ONE NUT IS
UNTORQUED?
YES
NO
ENSURE THAT THE CORRECT TORQUE VALUES
HAVE BEEN APPLIED ON ALL THE CONNECTING 
PARTS AND APPLY THE TORQUE RED LINE
NO FURTHER ACTION
AND/OR A350-A-27-XX-P022-02ZZZ-920Z-A
AND/OR A350-A-27-XX-P022-03ZZZ-920Z-A
AND/OR A350-A-27-XX-P022-04ZZZ-920Z-A
AND/OR A350-A-27-XX-P022-05ZZZ-920Z-A
AND/OR A350-A-27-XX-P022-06ZZZ-920Z-A
WITHIN THE THRESHOLD GIVEN IN PLANNING
REPLACE THE AFFECTED SHAFT IN ACCORDANCE
WITH TASK A350-A-27-XX-P022-01ZZZ-920Z-A
INFORMATION PARAGRAPH E.(2)
INFORMATION PARAGRAPH E.(2)
MARKINGS ON THE NUT(S)
ICN-A350-A-27XXP022-A-FAPE3-03ZBN-A-003-01

### Page 41

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 41
CONF 001
(2) Task A350-A-27-XX-P022-01001-920A-A - Depending on the Inspection
Results, Replace the Flap Torque-Shaft Assembly 2 Left Hand (LH) side
(5004CV)
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
197 Access Panel 197GL
Manpower/Resources/Skills
Man-hours 1.50h
Minimum Number of person 2
Elapsed Time 0.75h
Skills Airframe
Material necessary to do the job
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
1 CA96779-001 1 SHAFT
Referenced Information
Manuals/Drawings References/Sheets
ASR A350-A-51-42-XX-01ZZZ-667Z-A
MP
A350-A-20-51-50-01ZZZ-25BZ-A
A350-A-20-51-50-04ZZZ-25BZ-A
A350-A-27-54-62-00ZZZ-520Z-A
A350-A-27-54-62-00ZZZ-720Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-4X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. SD A350-A-06-2X-
XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-
XX-01ZZZ-04CZ-A.
3 For the identification of access panels, refer to Ref. SD A350-A-06-4X-
XX-01ZZZ-04CZ-A.
4 Remove and install fasteners in accordance with Ref. ASR A350-A-51-42-
XX-01ZZZ-667Z-A.
5 For Standard Mechanical T orques, refer to Ref. MP A350-
A-20-51-50-01ZZZ-25BZ-A.
6 For marking of the mechanical fasteners and their assemblies after
tightening to standard or specific torque values, refer to Ref. MP A350-
A-20-51-50-04ZZZ-25BZ-A.

### Page 42

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 42
(b) Remove the Flap T orque-Shaft Assembly 2 LH ( FIN 5004CV), refer to Ref. MP
A350-A-27-54-62-00ZZZ-520Z-A and as shown on Ref. Fig. Replacement of the
Flap T orque-Shaft Assembly 2 :
FIN 5004CV
1 SHAFT ASSY-2,FLAP   Item (1) Discard
(c) Install the Flap T orque-Shaft Assembly 2 LH ( FIN 5004CV), refer to Ref. MP A350-
A-27-54-62-00ZZZ-720Z-A and as shown on Ref. Fig. Replacement of the Flap
T orque-Shaft Assembly 2 :
FIN 5004CV
1 SHAFT ASSY-2,FLAP CA96779-001 Item 1

### Page 43

A350
SERVICE BULLETIN
Figure ICN-A350-A-27XXP022-A-FAPE3-03ZC0-A-001-01 SHEET 1/1
REV 00 Jun 06/18 A350-27-P022Replacement of the Flap T orque-Shaft Assembly 2
Page 43
CONF 001
FR60 FR61FR62
A
B
FR74
FR35
Z197
Z198
A
LH SHOWN
RH SYMMETRICAL
LH
RH
(1)
1
B
ICN-A350-A-27XXP022-A-FAPE3-03ZC0-A-001-01

### Page 44

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 44
CONF 002
(2) Task A350-A-27-XX-P022-01002-920A-A - Depending on the Inspection
Results, Replace the Flap Torque-Shaft Assembly 2 Left Hand (LH) side
(5004CV)
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
197 Access Panel 197GL
Manpower/Resources/Skills
Man-hours 1.50h
Minimum Number of person 2
Elapsed Time 0.75h
Skills Airframe
Material necessary to do the job
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
4 CA96779-002 1 SHAFT
Referenced Information
Manuals/Drawings References/Sheets
ASR A350-A-51-42-XX-01ZZZ-667Z-A
MP
A350-A-20-51-50-01ZZZ-25BZ-A
A350-A-20-51-50-04ZZZ-25BZ-A
A350-A-27-54-62-00ZZZ-520Z-A
A350-A-27-54-62-00ZZZ-720Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-4X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. SD A350-A-06-2X-
XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-
XX-01ZZZ-04CZ-A.
3 For the identification of access panels, refer to Ref. SD A350-A-06-4X-
XX-01ZZZ-04CZ-A.
4 Remove and install fasteners in accordance with Ref. ASR A350-A-51-42-
XX-01ZZZ-667Z-A.
5 For Standard Mechanical T orques, refer to Ref. MP A350-
A-20-51-50-01ZZZ-25BZ-A.
6 For marking of the mechanical fasteners and their assemblies after
tightening to standard or specific torque values, refer to Ref. MP A350-
A-20-51-50-04ZZZ-25BZ-A.

### Page 45

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 45
(b) Remove the Flap T orque-Shaft Assembly 2 LH ( FIN 5004CV), refer to Ref. MP
A350-A-27-54-62-00ZZZ-520Z-A and as shown on Ref. Fig. Replacement of the
Flap T orque-Shaft Assembly 2 :
FIN 5004CV
1 SHAFT ASSY-2,FLAP   Item (4) Discard
(c) Install the Flap T orque-Shaft Assembly 2 LH ( FIN 5004CV), refer to Ref. MP A350-
A-27-54-62-00ZZZ-720Z-A and as shown on Ref. Fig. Replacement of the Flap
T orque-Shaft Assembly 2 :
FIN 5004CV
1 SHAFT ASSY-2,FLAP CA96779-002 Item 4

### Page 46

A350
SERVICE BULLETIN
Figure ICN-A350-A-27XXP022-A-FAPE3-03ZC1-A-001-01 SHEET 1/1
REV 00 Jun 06/18 A350-27-P022Replacement of the Flap T orque-Shaft Assembly 2
Page 46
CONF 002
FR60 FR61FR62
A
B
FR74
FR35
Z197
Z198
A
LH SHOWN
RH SYMMETRICAL
B
LH
RH
(4)
4
ICN-A350-A-27XXP022-A-FAPE3-03ZC1-A-001-01

### Page 47

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 47
CONF 003
(2) Task A350-A-27-XX-P022-01003-920A-A - Depending on the Inspection
Results, Replace the Flap Torque-Shaft Assembly 2 Left Hand (LH) side
(5004CV)
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
197 Access Panel 197GL
Manpower/Resources/Skills
Man-hours 1.50h
Minimum Number of person 2
Elapsed Time 0.75h
Skills Airframe
Material necessary to do the job
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
5 CA96779-003 1 SHAFT
Referenced Information
Manuals/Drawings References/Sheets
ASR A350-A-51-42-XX-01ZZZ-667Z-A
MP
A350-A-20-51-50-01ZZZ-25BZ-A
A350-A-20-51-50-04ZZZ-25BZ-A
A350-A-27-54-62-00ZZZ-520Z-A
A350-A-27-54-62-00ZZZ-720Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-4X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. SD A350-A-06-2X-
XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-
XX-01ZZZ-04CZ-A.
3 For the identification of access panels, refer to Ref. SD A350-A-06-4X-
XX-01ZZZ-04CZ-A.
4 Remove and install fasteners in accordance with Ref. ASR A350-A-51-42-
XX-01ZZZ-667Z-A.
5 For Standard Mechanical T orques, refer to Ref. MP A350-
A-20-51-50-01ZZZ-25BZ-A.
6 For marking of the mechanical fasteners and their assemblies after
tightening to standard or specific torque values, refer to Ref. MP A350-
A-20-51-50-04ZZZ-25BZ-A.

### Page 48

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 48
(b) Remove the Flap T orque-Shaft Assembly 2 LH ( FIN 5004CV), refer to Ref. MP
A350-A-27-54-62-00ZZZ-520Z-A and as shown on Ref. Fig. Replacement of the
Flap T orque-Shaft Assembly 2 :
FIN 5004CV
1 SHAFT ASSY-2,FLAP   Item (5) Discard
(c) Install the Flap T orque-Shaft Assembly 2 LH ( FIN 5004CV), refer to Ref. MP A350-
A-27-54-62-00ZZZ-720Z-A and as shown on Ref. Fig. Replacement of the Flap
T orque-Shaft Assembly 2 :
FIN 5004CV
1 SHAFT ASSY-2,FLAP CA96779-003 Item 5

### Page 49

A350
SERVICE BULLETIN
Figure ICN-A350-A-27XXP022-A-FAPE3-03ZC2-A-001-01 SHEET 1/1
REV 00 Jun 06/18 A350-27-P022Replacement of the Flap T orque-Shaft Assembly 2
Page 49
CONF 003
FR60 FR61FR62
A
B
FR74
FR35
Z197
Z198
A
LH SHOWN
RH SYMMETRICAL
B
LH
RH
(5)
5
ICN-A350-A-27XXP022-A-FAPE3-03ZC2-A-001-01

### Page 50

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 50
CONF 001
(3) Task A350-A-27-XX-P022-02001-920A-A - Depending on the Inspection
Results, Replace the Flap Torque-Shaft Assembly 2 Right Hand (RH) side
(5104CV)
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
198 Access Panel 198ZR
Manpower/Resources/Skills
Man-hours 1.50h
Minimum Number of person 2
Elapsed Time 0.75h
Skills Airframe
Material necessary to do the job
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
1 CA96779-001 1 SHAFT
Referenced Information
Manuals/Drawings References/Sheets
ASR A350-A-51-42-XX-01ZZZ-667Z-A
MP
A350-A-20-51-50-01ZZZ-25BZ-A
A350-A-20-51-50-04ZZZ-25BZ-A
A350-A-27-54-62-00ZZZ-520Z-A
A350-A-27-54-62-00ZZZ-720Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-4X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. SD A350-A-06-2X-
XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-
XX-01ZZZ-04CZ-A.
3 For the identification of access panels, refer to Ref. SD A350-A-06-4X-
XX-01ZZZ-04CZ-A.
4 Remove and install fasteners in accordance with Ref. ASR A350-A-51-42-
XX-01ZZZ-667Z-A.
5 For Standard Mechanical T orques, refer to Ref. MP A350-
A-20-51-50-01ZZZ-25BZ-A.
6 For marking of the mechanical fasteners and their assemblies after
tightening to standard or specific torque values, refer to Ref. MP A350-
A-20-51-50-04ZZZ-25BZ-A.

### Page 51

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 51
(b) Remove the Flap T orque-Shaft Assembly 2 RH ( FIN 5104CV), refer to Ref. MP
A350-A-27-54-62-00ZZZ-520Z-A and as shown on Ref. Fig. Replacement of the
Flap T orque-Shaft Assembly 2 :
FIN 5104CV
1 SHAFT ASSY-2,FLAP   Item (1) Discard
(c) Install the Flap T orque-Shaft Assembly 2 RH ( FIN 5104CV), refer to Ref. MP A350-
A-27-54-62-00ZZZ-720Z-A and as shown on Ref. Fig. Replacement of the Flap
T orque-Shaft Assembly 2 :
FIN 5104CV
1 SHAFT ASSY-2,FLAP CA96779-001 Item 1

### Page 52

A350
SERVICE BULLETIN
Figure ICN-A350-A-27XXP022-A-FAPE3-03ZC0-A-001-01 SHEET 1/1
REV 00 Jun 06/18 A350-27-P022Replacement of the Flap T orque-Shaft Assembly 2
Page 52
CONF 001
FR60 FR61FR62
A
B
FR74
FR35
Z197
Z198
A
LH SHOWN
RH SYMMETRICAL
LH
RH
(1)
1
B
ICN-A350-A-27XXP022-A-FAPE3-03ZC0-A-001-01

### Page 53

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 53
CONF 002
(3) Task A350-A-27-XX-P022-02002-920A-A - Depending on the Inspection
Results, Replace the Flap Torque-Shaft Assembly 2 Right Hand (RH) side
(5104CV)
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
198
Manpower/Resources/Skills
Man-hours 1.50h
Minimum Number of person 2
Elapsed Time 0.75h
Skills Airframe
Material necessary to do the job
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
4 CA96779-002 1 SHAFT
Referenced Information
Manuals/Drawings References/Sheets
ASR A350-A-51-42-XX-01ZZZ-667Z-A
MP
A350-A-20-51-50-01ZZZ-25BZ-A
A350-A-20-51-50-04ZZZ-25BZ-A
A350-A-27-54-62-00ZZZ-520Z-A
A350-A-27-54-62-00ZZZ-720Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-4X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. SD A350-A-06-2X-
XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-
XX-01ZZZ-04CZ-A.
3 For the identification of access panels, refer to Ref. SD A350-A-06-4X-
XX-01ZZZ-04CZ-A.
4 Remove and install fasteners in accordance with Ref. ASR A350-A-51-42-
XX-01ZZZ-667Z-A.
5 For Standard Mechanical T orques, refer to Ref. MP A350-
A-20-51-50-01ZZZ-25BZ-A.
6 For marking of the mechanical fasteners and their assemblies after
tightening to standard or specific torque values, refer to Ref. MP A350-
A-20-51-50-04ZZZ-25BZ-A.

### Page 54

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 54
(b) Remove the Flap T orque-Shaft Assembly 2 RH ( FIN 5104CV), refer to Ref. MP
A350-A-27-54-62-00ZZZ-520Z-A and as shown on Ref. Fig. Replacement of the
Flap T orque-Shaft Assembly 2 :
FIN 5104CV
1 SHAFT ASSY-2,FLAP   Item (4) Discard
(c) Install the Flap T orque-Shaft Assembly 2 RH ( FIN 5104CV), refer to Ref. MP A350-
A-27-54-62-00ZZZ-720Z-A and as shown on Ref. Fig. Replacement of the Flap
T orque-Shaft Assembly 2 :
FIN 5104CV
1 SHAFT ASSY-2,FLAP CA96779-002 Item 4

### Page 55

A350
SERVICE BULLETIN
Figure ICN-A350-A-27XXP022-A-FAPE3-03ZC1-A-001-01 SHEET 1/1
REV 00 Jun 06/18 A350-27-P022Replacement of the Flap T orque-Shaft Assembly 2
Page 55
CONF 002
FR60 FR61FR62
A
B
FR74
FR35
Z197
Z198
A
LH SHOWN
RH SYMMETRICAL
B
LH
RH
(4)
4
ICN-A350-A-27XXP022-A-FAPE3-03ZC1-A-001-01

### Page 56

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 56
CONF 003
(3) Task A350-A-27-XX-P022-02003-920A-A - Depending on the Inspection
Results, Replace the Flap Torque-Shaft Assembly 2 Right Hand (RH) side
(5104CV)
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
198 Access Panel 198ZR
Manpower/Resources/Skills
Man-hours 1.50h
Minimum Number of person 2
Elapsed Time 0.75h
Skills Airframe
Material necessary to do the job
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
5 CA96779-003 1 SHAFT
Referenced Information
Manuals/Drawings References/Sheets
ASR A350-A-51-42-XX-01ZZZ-667Z-A
MP
A350-A-20-51-50-01ZZZ-25BZ-A
A350-A-20-51-50-04ZZZ-25BZ-A
A350-A-27-54-62-00ZZZ-520Z-A
A350-A-27-54-62-00ZZZ-720Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-4X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. SD A350-A-06-2X-
XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-
XX-01ZZZ-04CZ-A.
3 For the identification of access panels, refer to Ref. SD A350-A-06-4X-
XX-01ZZZ-04CZ-A.
4 Remove and install fasteners in accordance with Ref. ASR A350-A-51-42-
XX-01ZZZ-667Z-A.
5 For Standard Mechanical T orques, refer to Ref. MP A350-
A-20-51-50-01ZZZ-25BZ-A.
6 For marking of the mechanical fasteners and their assemblies after
tightening to standard or specific torque values, refer to Ref. MP A350-
A-20-51-50-04ZZZ-25BZ-A.

### Page 57

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 57
(b) Remove the Flap T orque-Shaft Assembly 2 RH ( FIN 5104CV), refer to Ref. MP
A350-A-27-54-62-00ZZZ-520Z-A and as shown on Ref. Fig. Replacement of the
Flap T orque-Shaft Assembly 2 :
FIN 5104CV
1 SHAFT ASSY-2,FLAP   Item (5) Discard
(c) Install the Flap T orque-Shaft Assembly 2 RH ( FIN 5104CV), refer to Ref. MP A350-
A-27-54-62-00ZZZ-720Z-A and as shown on Ref. Fig. Replacement of the Flap
T orque-Shaft Assembly 2 :
FIN 5104CV
1 SHAFT ASSY-2,FLAP CA96779-003 Item 5

### Page 58

A350
SERVICE BULLETIN
Figure ICN-A350-A-27XXP022-A-FAPE3-03ZC2-A-001-01 SHEET 1/1
REV 00 Jun 06/18 A350-27-P022Replacement of the Flap T orque-Shaft Assembly 2
Page 58
CONF 003
FR60 FR61FR62
A
B
FR74
FR35
Z197
Z198
A
LH SHOWN
RH SYMMETRICAL
B
LH
RH
(5)
5
ICN-A350-A-27XXP022-A-FAPE3-03ZC2-A-001-01

### Page 59

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 59
CONF ALL
(4) Task A350-A-27-XX-P022-03001-920A-A - Depending on the Inspection
Results, Replace the Slat Torque-Shaft Assembly 2 LH side (5006CW)
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
193 Access Panel 193CL, Panel 193DL
Manpower/Resources/Skills
Man-hours 1.50h
Minimum Number of person 2
Elapsed Time 0.75h
Skills Airframe
Material necessary to do the job
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
7 4784A0200-02 1 SHAFT
Referenced Information
Manuals/Drawings References/Sheets
ASR A350-A-51-42-XX-01ZZZ-667Z-A
MP
A350-A-20-51-50-01ZZZ-25BZ-A
A350-A-20-51-50-04ZZZ-25BZ-A
A350-A-27-84-62-00ZZZ-520Z-A
A350-A-27-84-62-00ZZZ-720Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-4X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices
1 For the identification of zones, refer to Ref. SD A350-A-06-2X-
XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-
XX-01ZZZ-04CZ-A.
3 For the identification of access panels, refer to Ref. SD A350-A-06-4X-
XX-01ZZZ-04CZ-A.
4 Remove and install fasteners in accordance with Ref. ASR A350-A-51-42-
XX-01ZZZ-667Z-A.
5 For Standard Mechanical T orques, refer to Ref. MP A350-
A-20-51-50-01ZZZ-25BZ-A.
6 For marking of the mechanical fasteners and their assemblies after
tightening to standard or specific torque values, refer to Ref. MP A350-
A-20-51-50-04ZZZ-25BZ-A.

### Page 60

A350
SERVICE BULLETIN
REV 00 Jun 06/18 A350-27-P022
Page 60
(b) Remove the Slat T orque-Shaft Assembly 2 LH ( FIN 5006CW), refer to Ref. MP
A350-A-27-84-62-00ZZZ-520Z-A and as shown on Ref. Fig. Replacement of the
Slat T orque-Shaft Assembly 2 :
FIN 5006CW
1 SHAFT ASSY-2,SLAT   Item (7)  
(c) Install the Slat T orque-Shaft Assembly 2 LH ( FIN 5006CW), refer to Ref. MP A350-
A-27-84-62-00ZZZ-720Z-A and as shown on Ref. Fig. Replacement of the Slat
T orque-Shaft Assembly 2:
FIN 5006CW
1 SHAFT ASSY-2,SLAT 4784A0200-02 Item 7

The text continues at https://openairdocs.org/service-documents/airbus/a350-27-p022/file/6575804f1795.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
