# Airbus Service Bulletin A350-29-P022

Copy: No revision named ("A350-29-P022"), 97 pages: PDF https://openairdocs.org/files/sha256/cf/49/cf49c205cfbafbd3b9d20c339b6b819385ef996d8005532f3983a6e09bbee5ea; text https://openairdocs.org/service-documents/airbus/a350-29-p022/file/cf49c205cfba.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2023-0656, the docket of AD 2023-13-13. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A350-29-P022
- Page: https://openairdocs.org/service-documents/airbus/a350-29-p022

## Text (97 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2023-0656, the docket of AD 2023-13-13. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 1
CONF ALL
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
 
The content of this document is the property of Airbus. All rights including copyrights are reserved.
It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may information
contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of the
copyright. Requests for reproduction of any data in this document and the media authorized for it must
be addressed to Airbus.
MANDATORY MANDATORY MANDATORY
ATA SYSTEM: 29
TITLE: HYDRAULIC POWER - GENERAL - UPGRADE LOW PRESSURE PIPE
STANDARD S11-12 FOR A350-1000 (6 YEARS)
MODIFICATION No.:
113984L44227

### Page 2

A350
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 2
ATA SYSTEM: 29
TITLE: HYDRAULIC POWER - GENERAL - UPGRADE LOW PRESSURE PIPE
STANDARD S11-12 FOR A350-1000 (6 YEARS)
REVISION TRANSMITTAL SHEET
This page transmits Revision No. 01 of Service Bulletin No. A350-29-P022.
A. ADDITIONAL WORK
No additional work is required by this revision.
B. REASON
Revision No. 01 issued to solve the issue with the swaged union in the frame between nose
fuselage and the cargo compartment.
C. CHANGES
CONF 001
SUMMARY
REASON Several typographical changes.
Note added in the advantages section to cover the
concessions.
GENERAL OVERVIEW
Fig.SA Sol.AA General Overview Illustration updated to add the pipe between Frame 18
and Frame 20, and the two pipes between Frame 21
and Frame 22 and their union.
PLANNING INFORMATION
REASON Several typographical changes.
Note added in the advantages section to cover the
concessions.
MANPOWER
T ask set A350-A-29-XX-P022-
01000-93AA-A Modification of
Low Pressure T ubes S11-12
T otal man-hours updated from 111.75 h to 129.75 h.
Elapsed time updated from 56 h to 65 h.
WEIGHT AND BALANCE Weight modify from +0.2 kg to +0.214 kg
Balance modify from +1.5 kg.m to +1.902 kg.m
REFERENCES
T ask set A350-A-29-XX-P022-
01000-93AA-A Modification of
Low Pressure T ubes S11-12
ASR A350-A-51-23-12-01ZZZ-667Z-A added.
MP A350-A-53-XX-XX-03ZZZ-520Z-A and MP A350-A-
53-XX-XX-03ZZZ-720Z-A added.
PMS 01-04-58, 01-06-12 and 01-07-117 added.
PUBLICATION AFFECTED List of manuals updated.
INDUSTRY SUPPORT INFORMATION Industry support information updated.
MATERIAL INFORMATION
CONSUMABLES
Consumables for task set
A350-A-29-XX-P022-01000-
93AA-A Modification of Low
Pressure T ubes S11-12
CML 04SBA3, 06AAB1, 06LCB1, 08BAA9, 12ABC1 and
14SBA1 added.

### Page 3

A350
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 3
Referenced consumables for
task set A350-A-29-XX-P022-
01000-93AA-A Modification of
Low Pressure T ubes S11-12
Paragraph created.
LIST OF NEW PARTS
Part kit 29P022D01R01 Kit revised:
- Item 11 NAS1149C0332R updated from qty 18 to qty
20.
- Item 19 NSA5191-3V9 updated from qty 4 to qty 8.
- Item 20 ABS0114V3-26 updated from qty 6 to qty
10.
- Item 21 NAS1149D0332K updated from qty 14 to qty
18.
- Item 22 NAS1149E0332P updated from qty 4 to qty
8.
- Item 33 V2911015000000 added.
- Item 36 NSA5575-8A added.
- Item 42 NSA855006-10 added.
- Item 44 NSA5191-3-10 added.
- Item 45 NAS509-3C added.
- Item 48 V2919013200000 added.
- Price updated.
LIST OF EXISTING PARTS
Interchangeable parts for task
set A350-A-29-XX-P022-01000-
93AA-A Modification of Low
Pressure T ubes S11-12
Interchangeable parts updated to add pipe between
Frame 21 and Frame 22.
Spare parts for task set A350-
A-29-XX-P022-01000-93AA-A
Modification of Low Pressure
T ubes S11-12
Spare parts updated to add:
- Pipe between Frame 18 and Frame 20.
- Pipe between Frame 21 and Frame 22.
ACCOMPLISHMENT INSTRUCTIONS
T ask set A350-A-29-XX-P022-01000-93AA-A Modification of Low Pressure T ubes S11-12
PREPARATION
A350-A-29-XX-P022-
01001-540A-A Job Set-Up
Manpower updated.
Standard practices updated.
Step (f) added to remove the cargo-compartment floor
panels.
Step (h) updated to change Frame 21 to Frame 22.
PROCEDURE
A350-A-29-XX-P022-
01001-520A-A Remove
the Yellow Hydraulic T ubes
between Frame 12 and
Frame 22
Title updated to change Frame 21 to Frame 22.
Working area updated.
Manpower updated.
Standard practices updated.

### Page 4

A350
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 4
Step (b) added to remove the clamp, item (36).
Step (c) updated to remove two additional clamps,
item (15).
Step (d) added to remove the clamp,item (15).
Step (f) updated to remove two additional block-
clampings, item (6).
Step (g) added to do a pre-cut of the tube, item (34).
Step (h) updated to add tubes item (33) and item
(34).
Step (i) updated to disconnect tube, item (47), and
clean the area.
Fig.BB Sol.AA Removal of
the Yellow Hydraulic T ubes
Sheet 01 revised to show tube, item (33), between
Frame 18 and Frame 20, and tube, item (34), between
Frame 21 and Frame 22.
Sheet 02 revised to mark tube, item (47), and add a
note.
Sheet 03 revised to show view H.
Sheet 04 created to show view J and K.
A350-A-29-XX-P022-
01001-720A-A Install the
Yellow Hydraulic T ubes
between Frame 12 and
Frame 22
Title updated to change Frame 21 to Frame 22.
Working area updated.
Manpower updated.
Standard practices updated.
Step (b) updated to do the electrical bonding prior to
the overcoating, apply sealant 06AAB1 and connect
tube, item (47).
Step (c) updated to add a note, put temporarily in
position, add the tubes, item 33 and item 48, and
mark the tubes.
Step (d) updated to group the installation of all blocks-
clampings and clamps and add a note.
Bonding test step added.
New steps (e), (f), (g), (h), (i), (j), (k), (l) and (m)
added.
Fig.BC Sol.AA Installation
of the Yellow Hydraulic
T ubes
Sheet 01 revised to show tube, item 33, between
Frame 18 and Frame 20, and tubes, item (34) and 48,
between Frame 21 and Frame 22, change tube shape
between Frame 21 and T-connection and add a flag
note.
Sheet 02 revised to mark tube, item (47), add a note
and update flag note references.
Sheet 03 revised to show view H, add a note and
update flag note references.
Sheet 04 created to show view J and K.
Sheet 05 created to show view L, M and N.
PREPARATION FOR TEST

### Page 5

A350
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 5
A350-A-29-XX-P022-
02001-762A-A Preparation
for test
Paragraph updated.
TEST
A350-A-29-XX-P022-
01001-320A-A T est
Paragraph updated.
CLOSE-UP
A350-A-29-XX-P022-
01001-740A-A Close-Up
Manpower updated.
Standard practices updated.
Step (c) updated to add the bonding test.
Step (e) updated to change Frame 21 to Frame 22.
Step (f) updated to change Frame 21 to Frame 22.
Step (g) added to install the cargo-compartment floor
panels.
APPENDIX
ELECTRICAL BONDING/GROUNDING CODE EXPLANATION
ELECTRICAL BONDING/
GROUNDING CODE
EXPLANATION
Appendix tittle written in upper case.
Sentence added to refer to the Appendix Illustration.
LIST OF CONCESSIONS New appendix created.
LIST OF CONCESSIONS Appendix created to show the list of concessions for
the applicable MSNs.
Fig.AB Sol.AA List of
Concessions
New illustration created.
CONF 002
SUMMARY
REASON Several typographical changes.
Note added in the advantages section to cover the
concessions.
GENERAL OVERVIEW
Fig.SA Sol.AB General Overview Illustration updated to remove item (3), add the two
pipes between Frame 18 and Frame 20 and their
union, and the two pipes between Frame 21 and
Frame 22 and their union.
PLANNING INFORMATION
REASON Several typographical changes.
Note added in the advantages section to cover the
concessions.
MANPOWER
T ask set A350-A-29-XX-P022-
01000-93AA-A Modification of
Low Pressure T ubes S11-12
T otal man-hours updated from 111.75 h to 129.75 h.
Elapsed time updated from 56 h to 65 h.
WEIGHT AND BALANCE Weight modify from +0.2 kg to +0.135 kg
Balance modify from +1.6 kg.m to +1.199 kg.m
REFERENCES

### Page 6

A350
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 6
T ask set A350-A-29-XX-P022-
01000-93AA-A Modification of
Low Pressure T ubes S11-12
ASR A350-A-51-23-12-01ZZZ-667Z-A added.
MP A350-A-53-XX-XX-03ZZZ-520Z-A and MP A350-A-
53-XX-XX-03ZZZ-720Z-A added.
PMS 01-04-58, 01-06-12 and 01-07-117 added.
PUBLICATION AFFECTED List of manuals updated.
INDUSTRY SUPPORT INFORMATION Industry support information updated.
MATERIAL INFORMATION
CONSUMABLES
Consumables for task set
A350-A-29-XX-P022-01000-
93AA-A Modification of Low
Pressure T ubes S11-12
CML 04SBA3, 06AAB1, 06LCB1, 08BAA9, 12ABC1 and
14SBA1 added.
Referenced consumables for
task set A350-A-29-XX-P022-
01000-93AA-A Modification of
Low Pressure T ubes S11-12
Paragraph created.
LIST OF NEW PARTS
Part kit 29P022D02R01 Kit revised:
- Item 11 NAS1149C0332R updated from qty 36 to qty
46.
- Item 16 ABS0478-1010 updated from qty 5 to qty 6.
- Item 33 V2911015000000 added.
- Item 36 NSA5575-8A added.
- Item 42 NSA855006-10 added.
- Item 44 NSA5191-3-10 added.
- Item 45 NAS509-3C added.
- Item 48 V2919013200000 added.
- Price updated.
LIST OF EXISTING PARTS
Interchangeable parts for task
set A350-A-29-XX-P022-01000-
93AA-A Modification of Low
Pressure T ubes S11-12
Interchangeable parts updated to add:
- Pipe between Frame 18 and Frame 19.
- Pipe between Frame 19 and Frame 20.
- Pipe between Frame 21 and Frame 22.
Spare parts for task set A350-
A-29-XX-P022-01000-93AA-A
Modification of Low Pressure
T ubes S11-12
Spare parts updated to add:
- Pipe between Frame 18 and Frame 19.
- Pipe between Frame 19 and Frame 20.
- Pipe between Frame 21 and Frame 22.
ACCOMPLISHMENT INSTRUCTIONS
T ask set A350-A-29-XX-P022-01000-93AA-A Modification of Low Pressure T ubes S11-12
PREPARATION
A350-A-29-XX-P022-
01001-540A-A Job Set-Up
Manpower updated.
Standard practices updated.

### Page 7

A350
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 7
Step (f) added to remove the cargo-compartment floor
panels.
Step (h) updated to change Frame 21 to Frame 22.
PROCEDURE
A350-A-29-XX-P022-
01003-520A-A Remove
the Yellow Hydraulic T ubes
between Frame 12 and
Frame 22
Title updated to change Frame 21 to Frame 22.
Working area updated.
Manpower updated.
Standard practices updated.
Step (b) added to remove the clamp, item (36).
Step (c) updated to remove two additional clamps,
item (15).
Step (d) added to remove the clamp, item (15).
Step (f) updated to remove two additional block-
clampings, item (6).
Step (g) added to do a pre-cut of the tube, item (34).
Step (h) updated to add tubes, item (33), item (34)
and item (43), and one additional union, item (16).
Step (i) updated to disconnect tube, item (47), and
clean the area.
Fig.BB Sol.AB Removal of
the Yellow Hydraulic T ubes
Sheet 01 revised to show tube, item (33), between
Frame 18 and Frame 19, tube ,item (43), between
Frame 19 and Frame 20, and tube, item (34), between
Frame 21 and Frame 22.
Sheet 02 revised to mark tube, item (47), and add a
note.
Sheet 03 revised to show view H.
Sheet 04 created to show view J, K and L.
A350-A-29-XX-P022-
01002-720A-A Install the
Yellow Hydraulic T ubes
between Frame 12 and
Frame 22
Title updated to change Frame 21 to Frame 22.
Working area updated.
Manpower updated.
Standard practices updated.
Step (b) updated to do the electrical bonding prior to
the overcoating, apply sealant 06AAB1 and connect
tube, item (47).
Step (c) updated to add a note, put temporarily in
position, add the tubes, item 33 and item 48, and
mark the tubes.
Step (d) updated to group the installation of all blocks-
clampings and clamps and add a note.
Bonding test step added.
New steps (e), (f), (g), (h), (i), (j), (k), (l) and (m)
added.

### Page 8

A350
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 8
Fig.BC Sol.AB Installation
of the Yellow Hydraulic
T ubes
Sheet 01 revised to show tube, item 33, between
Frame 18 and Frame 20, and tubes, item (34) and 48,
between Frame 21 and Frame 22, change tube shape
between Frame 21 and T-connection and add a flag
note.
Sheet 02 revised to mark tube, item (47), add a note
and update flag note references.
Sheet 03 revised to show view H, add a note and
update flag note references.
Sheet 04 created to show view J, K and L.
Sheet 05 created to show view M, N and P .
PREPARATION FOR TEST
A350-A-29-XX-P022-
02001-762A-A Preparation
for test
Paragraph updated.
TEST
A350-A-29-XX-P022-
01001-320A-A T est
Paragraph updated.
CLOSE-UP
A350-A-29-XX-P022-
01002-740A-A Close-Up
Manpower updated.
Standard practices updated.
Step (c) updated to add the bonding test.
Step (e) updated to change Frame 21 to Frame 22.
Step (f) updated to change Frame 21 to Frame 22.
Step (g) added to install the cargo-compartment floor
panels.
APPENDIX
ELECTRICAL BONDING/GROUNDING CODE EXPLANATION
ELECTRICAL BONDING/
GROUNDING CODE
EXPLANATION
Appendix tittle written in upper case.
Sentence added to refer to the Appendix Illustration.
LIST OF CONCESSIONS New appendix created.
LIST OF CONCESSIONS Appendix created to show the list of concessions for
the applicable MSNs.
Fig.AB Sol.AA List of
Concessions
New illustration created.
CONF ALL
D. FILING INSTRUCTIONS
This Service Bulletin has been generated electronically and is reissued as a complete
document. Replace the complete document.
Put this Revision Transmittal Sheet in front of the Service Bulletin.
E. HISTORY OF PREVIOUS REVISIONS
No previous revision
F. REVISION SEQUENCE

### Page 9

A350
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 9
ORIGINAL: Jan 04/21
REVISION No. : 01 - Sep 15/22

### Page 10

A350
SERVICE BULLETIN
SUMMARY
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 10
ATA SYSTEM: 29
TITLE: HYDRAULIC POWER - GENERAL - UPGRADE LOW PRESSURE PIPE
STANDARD S11-12 FOR A350-1000 (6 YEARS)
SUMMARY
This summary is for information only and is not approved for modification of the aircraft.
A. MODIFICATIONS
CONF 001
MODIFICATION CLASSIFICATION
MAJOR None
MINOR 113984L44227
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
NOTE: This modification is related to an airworthiness issue and has been re-classified and
confirmed by EASA as minor in accordance with EU Part 21.A.91. As such, this is
handled by Airbus under the Design Organisation Approval ref. EASA.21J.031.
CONF 002
MODIFICATION CLASSIFICATION
MAJOR None
MINOR 113984L44227
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
NOTE: This modification is related to an airworthiness issue and has been re-classified and
confirmed by EASA as minor in accordance with EU Part 21.A.91. As such, this is
handled by Airbus under the Design Organisation Approval ref. EASA.21J.031.
CONF ALL
B. REASON
(1) History
This Service Bulletin has been issued to advise operators of spots and stains
discovered on tubes made from aluminium 6061 T6 after alodine process. As
consequence, micrographs show a reduction of wall thickness up to 15%. Additionally,
the process applied by the supplier for the determination of maximum ovality was
not in accordance with the manufacturer pipes specification. The effective pipes are
installed in the return line of yellow hydraulic system only. Only the sections 11 to 12,
13 to 14 and 15 are affected.
The consequence of these findings may affect the pipe and introduces a risk of
premature failure.
(2) Objective/Action
This Service Bulletin gives instructions to replace all applicable aluminium pipes by
titanium pipes.

### Page 11

A350
SERVICE BULLETIN
SUMMARY
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 11
(3) Advantages
The accomplishment of this Service Bulletin will prevent the risk of premature failure.
NOTE: The accomplishment of this Service Bulletin will supersede the concessions
for the applicable Manufacturer Serial Number (MSN)s, refer to Appendix LIST
OF CONCESSIONS.
(4) Operational/Maintenance Consequences
None
C. GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE MANDATORY COST SAVING NO
A/C OPERATION
AFFECTED
NO VENDOR SB NO
CANCELS INSPECTION SB NO ETOPS AFFECTED NO
PAX COMFORT AFFECTED NO POTENTIAL AD YES
RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO
LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO
NOTE: Service Bulletin must be accomplished.
D. MAINTENANCE CONFIGURATION
CONF 001
No specific aircraft maintenance configuration required.
CONF 002
No specific aircraft maintenance configuration required.
CONF ALL
E. MATERIAL PRICE INFORMATION
CONF 001
(1) Modification of Low Pressure Tubes S11-12
(a) T ask set A350-A-29-XX-P022-01000-93AA-A Modification of Low Pressure T ubes
S11-12
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS
Part kit 29P022D01R01 1 11000.00 USD Bolts, nuts, washers, clamps,
unions, tubes and elbow
CONF 002
(1) Modification of Low Pressure Tubes S11-12

### Page 12

A350
SERVICE BULLETIN
SUMMARY
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 12
(a) T ask set A350-A-29-XX-P022-01000-93AA-A Modification of Low Pressure T ubes
S11-12
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS
Part kit 29P022D02R01 1 11000.00 USD Bolts, nuts, washers, clamps,
unions, tubes and elbow
CONF ALL
F. APPLICABILITY
This Service Bulletin is applicable to this (these) operator(s):
CPA QTR
G. CONCURRENT REQUIREMENTS
None
H. NATURE OF THE WORK
CONF 001
(1) Modification of Low Pressure Tubes S11-12
(a) T ask set A350-A-29-XX-P022-01000-93AA-A Modification of Low Pressure T ubes
S11-12
AIRCRAFT YES
EQUIPMENT NO
CONF 002
(1) Modification of Low Pressure Tubes S11-12
(a) T ask set A350-A-29-XX-P022-01000-93AA-A Modification of Low Pressure T ubes
S11-12
AIRCRAFT YES
EQUIPMENT NO
CONF ALL
I. MANPOWER
CONF 001
(1) Modification of Low Pressure Tubes S11-12
(a) T ask set A350-A-29-XX-P022-01000-93AA-A Modification of Low Pressure T ubes
S11-12
MANPOWER
TOTAL MAN-HOURS 129.75
h
ELAPSED TIME (HOURS) 65.00 h
CONF 002
(1) Modification of Low Pressure Tubes S11-12

### Page 13

A350
SERVICE BULLETIN
SUMMARY
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 13
(a) T ask set A350-A-29-XX-P022-01000-93AA-A Modification of Low Pressure T ubes
S11-12
MANPOWER
TOTAL MAN-HOURS 129.75
h
ELAPSED TIME (HOURS) 65.00 h

### Page 14

A350
SERVICE BULLETIN
SUMMARY
Figure ICN-A350-A-29XXP022-A-FAPE3-06N4I-A-002-01 Fig.SA Sol.AB SHEET 1/1
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22
General Overview
Page 14
CONF ALL
J. GENERAL OVERVIEW
CONF 002
FR21
A
FWD CARGO DOOR
Z120
Z130
FR12
FR21
FR27
FR12
FR13
FR14
FR16
FR17
FR19
FR18
FR20
A
HYDRAULIC TUBE 
TO BE REPLACED
HYDRAULIC TUBE 
TO BE REPLACED
HYDRAULIC TUBE 
TO BE REPLACED
CUT AND REPLACED
HYDRAULIC TUBE TO BE
HYDRAULIC TUBE 
TO BE REPLACED
TO BE REPLACED
HYDRAULIC TUBE 
T-CONNECTION
ICN-A350-A-29XXP022-A-FAPE3-06N4I-A-002-01

### Page 15

A350
SERVICE BULLETIN
SUMMARY
Figure ICN-A350-A-29XXP022-A-FAPE3-04OJA-A-002-01 Fig.SA Sol.AA SHEET 1/1
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22
General Overview
Page 15
CONF 001
A
FWD CARGO DOOR
Z120
Z130
FR12
FR21
FR27
FR12
FR13
FR14
FR16
FR17
FR19
FR18
FR20
A
HYDRAULIC TUBE 
TO BE REPLACED
HYDRAULIC TUBE 
TO BE REPLACED
HYDRAULIC TUBE 
TO BE REPLACED
CUT AND REPLACED
HYDRAULIC TUBE TO BE
HYDRAULIC TUBE 
TO BE REPLACED
T-CONNECTION
FR21
ICN-A350-A-29XXP022-A-FAPE3-04OJA-A-002-01

### Page 16

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 16
ATA SYSTEM: 29
TITLE: HYDRAULIC POWER - GENERAL - UPGRADE LOW PRESSURE PIPE
STANDARD S11-12 FOR A350-1000 (6 YEARS)
CONF ALL
1. PLANNING INFORMATION
A. APPLICABILITY
NOTE: This modification is applicable by Service Bulletin only.
(1) Models
ON A/C 0088, 0110, 0141, 0161, 0169, 0188, 0206, 0215
350-1041
CONF ALL
(2) Applicability by MSN
0088 0110 0141 0161 0169 0188 0206 0215
(3) MSN by configuration
CONF 001
MSN CONFIGURATION
0110 0141 0161 0169 0188 0206 0215 001
CONF 002
MSN CONFIGURATION
0088 002
CONF ALL
(4) Configuration definition
CONF 001
Configuration 001
CONF 001 is applicable for aircraft on which MOD No. 107585L20490 is
embodied.
CONF 001 retrofits following modifications: 113984L44227.
CONF 002
Configuration 002
CONF 002 is applicable for aircraft on which MOD No. 107585L20490 is not
embodied.
CONF 002 retrofits following modifications: 113984L44227.
CONF ALL
B. CONCURRENT REQUIREMENTS
None
C. REASON

### Page 17

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 17
(1) History
This Service Bulletin has been issued to advise operators of spots and stains
discovered on tubes made from aluminium 6061 T6 after alodine process. As
consequence, micrographs show a reduction of wall thickness up to 15%. Additionally,
the process applied by the supplier for the determination of maximum ovality was
not in accordance with the manufacturer pipes specification. The effective pipes are
installed in the return line of yellow hydraulic system only. Only the sections 11 to 12,
13 to 14 and 15 are affected.
The consequence of these findings may affect the pipe and introduces a risk of
premature failure.
(2) Objective/Action
This Service Bulletin gives instructions to replace all applicable aluminium pipes by
titanium pipes.
(3) Advantages
The accomplishment of this Service Bulletin will prevent the risk of premature failure.
NOTE: The accomplishment of this Service Bulletin will supersede the concessions
for the applicable Manufacturer Serial Number (MSN)s, refer to Appendix LIST
OF CONCESSIONS.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
T o accomplish this Service Bulletin it is necessary to:
(1) Modification of Low Pressure Tubes S11-12
(a) T ask set A350-A-29-XX-P022-01000-93AA-A Modification of Low Pressure T ubes
S11-12
CONF 001
1 Remove the Yellow Hydraulic T ubes between Frame 12 and Frame 22
CONF 002
1 Remove the Yellow Hydraulic T ubes between Frame 12 and Frame 22
CONF 001
2 Install the Yellow Hydraulic T ubes between Frame 12 and Frame 22
CONF 002
2 Install the Yellow Hydraulic T ubes between Frame 12 and Frame 22
CONF ALL
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
This Service Bulletin has been classified Mandatory. It is expected that an
Airworthiness Directive (AD) published by the European Union Aviation Safety Agency
(EASA) will be issued to confirm this classification. The accomplishment timescale,
which has not yet been defined, will be given in the AD.
F. APPROVAL

### Page 18

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 18
The technical content of this document is approved under the authority of the Design
Organisation Approval ref. EASA.21J.031.
If an aircraft listed in the applicability has a modification or repair embodied that is not
of AIRBUS origin, and which affects the content of this Service Bulletin, the operator
is responsible for obtaining approval by its airworthiness authority for any adaptation
necessary before incorporation of the Service Bulletin.
G. MANPOWER
CONF 001
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification of Low Pressure Tubes S11-12
(a) T ask set A350-A-29-XX-P022-01000-93AA-A Modification of Low Pressure T ubes
S11-12
PREPARATION
Job Set-Up 29.00 h
PROCEDURE
Remove the Yellow Hydraulic T ubes between Frame 12 and
Frame 22
16.00 h
Install the Yellow Hydraulic T ubes between Frame 12 and
Frame 22
38.00 h
PREPARATION FOR TEST
Preparation for test 0.25 h
TEST
T est 1.50 h
CLOSE-UP
Close-Up 45.00 h
TOTAL MAN-HOURS 129.75 h
ELAPSED TIME (HOURS) 65.00 h
CONF 002
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Modification of Low Pressure Tubes S11-12
(a) T ask set A350-A-29-XX-P022-01000-93AA-A Modification of Low Pressure T ubes
S11-12
PREPARATION
Job Set-Up 29.00 h
PROCEDURE

### Page 19

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 19
Remove the Yellow Hydraulic T ubes between Frame 12 and
Frame 22
16.00 h
Install the Yellow Hydraulic T ubes between Frame 12 and
Frame 22
38.00 h
PREPARATION FOR TEST
Preparation for test 0.25 h
TEST
T est 1.50 h
CLOSE-UP
Close-Up 45.00 h
TOTAL MAN-HOURS 129.75 h
ELAPSED TIME (HOURS) 65.00 h
CONF ALL
H. WEIGHT AND BALANCE
CONF 001
The weight and balance estimates given in this Service Bulletin are based on the
Manufacturer's Empty Weight (MEW) and do not include operator's items. The definition of
MEW and operator's items is given in the Weight and Balance Manual (WBM), Ref. WBM.
Manufacturer's Empty Weight +0.214 kg (+0.472 lb)
Effect on Balance +1.902 kg.m (+13.757 lb.ft)
CONF 002
The weight and balance estimates given in this Service Bulletin are based on the
Manufacturer's Empty Weight (MEW) and do not include operator's items. The definition of
MEW and operator's items is given in the Weight and Balance Manual (WBM), Ref. WBM.
Manufacturer's Empty Weight +0.135 kg (+0.298 lb)
Effect on Balance +1.199 kg.m (+8.672 lb.ft)
CONF ALL
I. ELECTRICAL LOAD DATA
Not changed
J. REFERENCES
CONF 001
(1) Modification of Low Pressure Tubes S11-12
(a) T ask set A350-A-29-XX-P022-01000-93AA-A Modification of Low Pressure T ubes
S11-12
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-23-12-01ZZZ-667Z-A A350-A-51-24-XX-01ZZZ-667Z-A
A350-A-51-4X-XX-01ZZZ-667Z-A A350-A-51-42-XX-01ZZZ-667Z-A
A350-A-51-43-XX-01ZZZ-667Z-A
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-33-42-01ZZZ-041Z-A A350-A-20-51-50-01ZZZ-042Z-A
A350-A-20-55-XX-01ZZZ-042Z-A

### Page 20

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 20
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP)
A350-A-12-XX-XX-00ZZZ-170Z-A A350-A-20-51-50-01ZZZ-25BZ-A
A350-A-20-51-61-00ZZZ-25BZ-A
A350-A-20-51-61-08ZZZ-25BZ-A
A350-A-21-2X-XX-00ZZZ-520Z-A
A350-A-21-2X-XX-00ZZZ-720Z-A
A350-A-24-41-XX-00ZZZ-170Z-A A350-A-29-XX-XX-00ZZZ-360Z-A
A350-A-29-XX-XX-02ZZZ-170Z-A
A350-A-29-13-XX-00ZZZ-320Z-A A350-A-29-13-75-00ZZZ-720Z-A
A350-A-32-22-XX-00ZZZ-397Z-A
A350-A-32-22-XX-01ZZZ-397Z-A
A350-A-32-5X-XX-00ZZZ-345Z-A
A350-A-32-5X-XX-00ZZZ-398Z-A
A350-A-49-42-XX-00ZZZ-320Z-A A350-A-49-42-54-01ZZZ-520Z-A
A350-A-49-42-54-01ZZZ-720Z-A
A350-A-53-XX-XX-03ZZZ-520Z-A
A350-A-53-XX-XX-03ZZZ-720Z-A
A350-A-53-12-75-00ZZZ-520Z-A
A350-A-53-12-75-00ZZZ-720Z-A
PROCESS AND MATERIAL SPECIFICATION (PMS)
01-04-58 01-06-12
01-07-117
SYSTEM DESCRIPTION (SD)
A350-A-06-2X-XX-01ZZZ-04CZ-A A350-A-06-3X-XX-01ZZZ-04CZ-A
TECHNICAL FOLLOW UP (TFU)
29.00.00.090
WEIGHT AND BALANCE MANUAL (WBM)
STANDARDS MANUAL (SM)
CONSUMABLE MATERIAL LIST (CML)
CONF 002
(1) Modification of Low Pressure Tubes S11-12
(a) T ask set A350-A-29-XX-P022-01000-93AA-A Modification of Low Pressure T ubes
S11-12
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-23-12-01ZZZ-667Z-A A350-A-51-24-XX-01ZZZ-667Z-A
A350-A-51-4X-XX-01ZZZ-667Z-A A350-A-51-42-XX-01ZZZ-667Z-A
A350-A-51-43-XX-01ZZZ-667Z-A
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-33-42-01ZZZ-041Z-A A350-A-20-51-50-01ZZZ-042Z-A
A350-A-20-55-XX-01ZZZ-042Z-A

### Page 21

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 21
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP)
A350-A-12-XX-XX-00ZZZ-170Z-A A350-A-20-51-50-01ZZZ-25BZ-A
A350-A-20-51-61-00ZZZ-25BZ-A
A350-A-20-51-61-08ZZZ-25BZ-A
A350-A-21-2X-XX-00ZZZ-520Z-A
A350-A-21-2X-XX-00ZZZ-720Z-A
A350-A-24-41-XX-00ZZZ-170Z-A A350-A-29-XX-XX-00ZZZ-360Z-A
A350-A-29-XX-XX-02ZZZ-170Z-A
A350-A-29-13-XX-00ZZZ-320Z-A A350-A-29-13-75-00ZZZ-720Z-A
A350-A-32-22-XX-00ZZZ-397Z-A
A350-A-32-22-XX-01ZZZ-397Z-A
A350-A-32-5X-XX-00ZZZ-345Z-A
A350-A-32-5X-XX-00ZZZ-398Z-A
A350-A-49-42-XX-00ZZZ-320Z-A A350-A-49-42-54-01ZZZ-520Z-A
A350-A-49-42-54-01ZZZ-720Z-A
A350-A-53-XX-XX-03ZZZ-520Z-A
A350-A-53-XX-XX-03ZZZ-720Z-A
A350-A-53-12-75-00ZZZ-520Z-A
A350-A-53-12-75-00ZZZ-720Z-A
PROCESS AND MATERIAL SPECIFICATION (PMS)
01-04-58 01-06-12
01-07-117
SYSTEM DESCRIPTION (SD)
A350-A-06-2X-XX-01ZZZ-04CZ-A A350-A-06-3X-XX-01ZZZ-04CZ-A
TECHNICAL FOLLOW UP (TFU)
29.00.00.090
WEIGHT AND BALANCE MANUAL (WBM)
STANDARDS MANUAL (SM)
CONSUMABLE MATERIAL LIST (CML)
CONF ALL
K. PUBLICATION AFFECTED
MAINTENANCE ILLUSTRATED PART DATA (MIPD)
MAINTENANCE PROCEDURE (MP)
L. INDUSTRY SUPPORT INFORMATION
AIRBUS will share the costs of accomplishment of this Service Bulletin by providing the kits
at no charge for orders placed before Mar 31/25.
For the accomplishment of this Service Bulletin before Mar 31/25, AIRBUS will credit the
man-hours indicated in this Service Bulletin at the agreed in-house warranty labor rate.
Claims for this allowance shall be received no later than 90 days after completion of the last
affected aircraft of your fleet fulfilling above timeframe conditions.
This Service Bulletin is the subject of an AIRBUS monitored retrofit campaign.
For the organization of this retrofit, you are kindly requested to contact AIRBUS retrofit
management department: monitored.retrofit@airbus.com.

### Page 22

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 22
2. MATERIAL INFORMATION
A. MATERIAL APPLICABILITY
CONF 001
Material for task set A350-A-29-XX-P022-01000-93AA-A Modification of Low
Pressure Tubes S11-12
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
Referenced consumables See SB
Part kit 29P022D01R01 1
Interchangeable parts See SB
Spare parts See SB
CONF 002
Material for task set A350-A-29-XX-P022-01000-93AA-A Modification of Low
Pressure Tubes S11-12
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
Referenced consumables See SB
Part kit 29P022D02R01 1
Interchangeable parts See SB
Spare parts See SB
CONF ALL
B. TOOLING
CONF 001
Referenced tools for task set A350-A-29-XX-P022-01000-93AA-A Modification of
Low Pressure Tubes S11-12
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. MP A350-A-32-22-XX-00ZZZ-397Z-A
Ref. MP A350-A-32-5X-XX-00ZZZ-398Z-A
Ref. MP A350-A-32-22-XX-01ZZZ-397Z-A
Ref. MP A350-A-20-51-61-08ZZZ-25BZ-A
CONF 002
Referenced tools for task set A350-A-29-XX-P022-01000-93AA-A Modification of
Low Pressure Tubes S11-12
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. MP A350-A-32-22-XX-00ZZZ-397Z-A
Ref. MP A350-A-32-5X-XX-00ZZZ-398Z-A
Ref. MP A350-A-32-22-XX-01ZZZ-397Z-A
Ref. MP A350-A-20-51-61-08ZZZ-25BZ-A

### Page 23

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 23
CONF ALL
C. CONSUMABLES
CONF 001
Consumables for task set A350-A-29-XX-P022-01000-93AA-A Modification of Low
Pressure Tubes S11-12
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
04QAC5
Coating - - Corrosion
Inhibiting Fastener Head
Protection
04SBA3 Varnish Polyurethane - LowVOC - External Structure
06AAB1 Polysulfide Sealant -General Purpose Fillet
06AAC1 Polysulfide Sealant -General Purpose Interfay
06ACA1
Polysulfide Sealant - Low
Density MultiPurpose
Brushable
06LCB1
Non Hardening Jointing
Putty - Medium T emp. Area
Chromate Free
08BAA9 Non Aqueous Cleaner -General
12ABC1
Corrosion Preventive
Compound - Water
Displacing Soft Film
14SBA1 T extile - Lint free Cotton
CONF 002
Consumables for task set A350-A-29-XX-P022-01000-93AA-A Modification of Low
Pressure Tubes S11-12
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
04QAC5
Coating - - Corrosion
Inhibiting Fastener Head
Protection
04SBA3 Varnish Polyurethane - LowVOC - External Structure
06AAB1 Polysulfide Sealant -General Purpose Fillet
06AAC1 Polysulfide Sealant -General Purpose Interfay
06ACA1
Polysulfide Sealant - Low
Density MultiPurpose
Brushable
06LCB1
Non Hardening Jointing
Putty - Medium T emp. Area
Chromate Free
08BAA9 Non Aqueous Cleaner -General

### Page 24

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 24
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
12ABC1
Corrosion Preventive
Compound - Water
Displacing Soft Film
14SBA1 T extile - Lint free Cotton
CONF 001
Referenced consumables for task set A350-A-29-XX-P022-01000-93AA-A
Modification of Low Pressure Tubes S11-12
T o accomplish this Service Bulletin it is necessary to use the consumable materials listed in:
Ref. MP A350-A-20-51-61-00ZZZ-25BZ-A
Ref. MP A350-A-20-51-61-08ZZZ-25BZ-A
Ref. MP A350-A-21-2X-XX-00ZZZ-720Z-A
Ref. MP A350-A-29-XX-XX-02ZZZ-170Z-A
Ref. MP A350-A-49-42-54-01ZZZ-720Z-A
Ref. MP A350-A-53-XX-XX-03ZZZ-720Z-A
Ref. MP A350-A-53-12-75-00ZZZ-720Z-A
CONF 002
Referenced consumables for task set A350-A-29-XX-P022-01000-93AA-A
Modification of Low Pressure Tubes S11-12
T o accomplish this Service Bulletin it is necessary to use the consumable materials listed in:
Ref. MP A350-A-20-51-61-00ZZZ-25BZ-A
Ref. MP A350-A-20-51-61-08ZZZ-25BZ-A
Ref. MP A350-A-21-2X-XX-00ZZZ-720Z-A
Ref. MP A350-A-29-XX-XX-02ZZZ-170Z-A
Ref. MP A350-A-49-42-54-01ZZZ-720Z-A
Ref. MP A350-A-53-XX-XX-03ZZZ-720Z-A
Ref. MP A350-A-53-12-75-00ZZZ-720Z-A
CONF ALL
D. LIST OF NEW PARTS
CONF 001
Part kit 29P022D01R01
Cost 11000.00 USD
Availability 280 d (calendar days from receipt of order)
NOTE(S)
The sales terms (costs and availability) are estimated in relation to economic
conditions. The latest valid price and lead time for ordering purposes shall be
obtained through the AIRBUS Spares portal or through a request for quotation to
airbus.kit@airbus.com.
The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning
schedule with your order so that we can try to comply with your requirements.

### Page 25

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 25
Procurement address D4296
AIRBUS
Material, Logistics and Suppliers ATP II B,
Hein-Sass-Weg 24
21129 HAMBURG
GERMANY
Phone: +49 40 743 51775
E-mail: airbus.kit@airbus.com
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
1 V2911015100000 1 TUBE
2 V2911015200000 1 TUBE
3 V2911015300000 1 TUBE
4 V2911015400000 1 TUBE
5 V2911015700000 1 TUBE
7 ABS1125-10 1 UNION
9 ABS0114T3-9 3 BOLT
11 NAS1149C0332R 20 WASHER
12 NAS1726C3PE 4 NUT
16 ABS0478-1010 5 UNION
17 NSA855007-10 1 ELBOW
19 NSA5191-3V9 8 BOLT
20 ABS0114V3-26 10 BOLT
21 NAS1149D0332K 18 WASHER
22 NAS1149E0332P 8 WASHER
23 NAS1726C3E 8 NUT
32 NSA5067-3-1 2 NUT
33 V2911015000000 1 TUBE
36 NSA5575-8A 1 CLAMP
42 NSA855006-10 1 UNION
44 NSA5191-3-10 1 BOLT
45 NAS509-3C 1 NUT
48 V2919013200000 1 TUBE
NOTE(S)
Refer to the AIRBUS Ref. SM if you find part numbers of hardware components which
you cannot identify. The SM will give you the correct part number to part number
relationship.
CONF 002
Part kit 29P022D02R01
Cost 11000.00 USD
Availability 280 d (calendar days from receipt of order)

### Page 26

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 26
NOTE(S)
The sales terms (costs and availability) are estimated in relation to economic
conditions. The latest valid price and lead time for ordering purposes shall be
obtained through the AIRBUS Spares portal or through a request for quotation to
airbus.kit@airbus.com.
The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning
schedule with your order so that we can try to comply with your requirements.
Procurement address D4296
AIRBUS
Material, Logistics and Suppliers ATP II B,
Hein-Sass-Weg 24
21129 HAMBURG
GERMANY
Phone: +49 40 743 51775
E-mail: airbus.kit@airbus.com
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
1 V2911015100000 1 TUBE
2 V2911015200000 1 TUBE
3 V2911015300000 1 TUBE
4 V2911015400000 1 TUBE
5 V2911015700000 1 TUBE
7 ABS1125-10 1 UNION
9 ABS0114T3-9 3 BOLT
11 NAS1149C0332R 46 WASHER
12 NAS1726C3PE 12 NUT
16 ABS0478-1010 5 UNION
17 NSA855007-10 1 ELBOW
32 NSA5067-3-1 2 NUT
33 V2911015000000 1 TUBE
36 NSA5575-8A 1 CLAMP
42 NSA855006-10 1 UNION
44 NSA5191-3-10 1 BOLT
45 NAS509-3C 1 NUT
48 V2919013200000 1 TUBE
NOTE(S)
Refer to the AIRBUS Ref. SM if you find part numbers of hardware components which
you cannot identify. The SM will give you the correct part number to part number
relationship.
CONF ALL
E. LIST OF EXISTING PARTS

### Page 27

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 27
CONF 001
Interchangeable parts for task set A350-A-29-XX-P022-01000-93AA-A Modification
of Low Pressure Tubes S11-12
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
TUBE V2911009100000 V2911015300000 03 (1) (2)
TUBE V2911009200000 V2911015400000 03 (1) (2)
TUBE V2911009600000 V2911015200000 03 (1) (2)
TUBE V2911009700000 V2911015100000 03 (1) (2)
TUBE V2911014700000 V2911015700000 03 (1) (2)
TUBE V2919007000000 V2919013200000 03 (1) (2)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
(2): One-way interchangeable with conditions:
- The Post-MOD part numbers listed above can replace Pre-MOD part numbers
listed above as a set in one aircraft section.
- The Pre-MOD part numbers listed above cannot replace Post-MOD part
numbers listed above.
CONF 002
Interchangeable parts for task set A350-A-29-XX-P022-01000-93AA-A Modification
of Low Pressure Tubes S11-12
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
TUBE V2911009100000 V2911015300000 03 (1) (2)
TUBE V2911009200000 V2911015400000 03 (1) (2)
TUBE V2911009400000 V2911015000000 03 (1) (2)
TUBE V2911009600000 V2911015200000 03 (1) (2)
TUBE V2911009700000 V2911015100000 03 (1) (2)
TUBE V2911014600000 V2911015000000 03 (1) (2)
TUBE V2911014700000 V2911015700000 03 (1) (2)
TUBE V2919007000000 V2919013200000 03 (1) (2)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
(2): One-way interchangeable with conditions:
- The Post-MOD part numbers listed above can replace Pre-MOD part numbers
listed above as a set in one aircraft section.
- The Pre-MOD part numbers listed above cannot replace Post-MOD part
numbers listed above.

### Page 28

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 28
CONF 001
Spare parts for task set A350-A-29-XX-P022-01000-93AA-A Modification of Low
Pressure Tubes S11-12
DESCRIPTION OLD PART No. SEE NOTES
TUBE V2911009100000 (1)
TUBE V2911009200000 (1)
TUBE V2911009600000 (1)
TUBE V2911009700000 (1)
TUBE V2911014700000 (1)
TUBE V2911015000000 (1)
TUBE V2919007000000 (1)
NOTE(S)
(1): The parts listed here must not be installed anymore on aircraft which have
accomplished this Service Bulletin or which have the equivalent production
modification embodied.
CONF 002
Spare parts for task set A350-A-29-XX-P022-01000-93AA-A Modification of Low
Pressure Tubes S11-12
DESCRIPTION OLD PART No. SEE NOTES
TUBE V2911009100000 (1)
TUBE V2911009200000 (1)
TUBE V2911009400000 (1)
TUBE V2911009600000 (1)
TUBE V2911009700000 (1)
TUBE V2911014600000 (1)
TUBE V2911014700000 (1)
TUBE V2919007000000 (1)
NOTE(S)
(1): The parts listed here must not be installed anymore on aircraft which have
accomplished this Service Bulletin or which have the equivalent production
modification embodied.

### Page 29

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 29
CONF ALL
3. ACCOMPLISHMENT INSTRUCTIONS
Task set A350-A-29-XX-P022-01000-93AA-A (A350-A-29-XX-P022-01ZZZ-93AZ-A)
Modification of Low Pressure T ubes S11-12
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL
WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND MECHANICALLY
SERVICEABLE). WHEN YOU DO MAINTENANCE WORK, REPAIRS OR
MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND
THE WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND
DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO Ref. ESP A350-A-20-55-XX-01ZZZ-
042Z-A .
NOTE: The accomplishment instructions of this Service Bulletin include procedures given in
other documents or in other sections of the Service Bulletin. When the words “refer to”
are used and the operator has a procedure accepted by the local authority he belongs to,
the accepted alternative procedure can be used. When the words “in accordance with”
are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service Bulletin.
Operators can therefore, as deemed necessary, omit or add access and/or close-up steps
to add flexibility to their maintenance operations as long as the technical intent of the
Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms. Refer
to paragraph 1.J., References, for the definition of acronyms.
NOTE: This Service Bulletin is classified mandatory or expected to be classified mandatory by
an Airworthiness Directive (AD). The paragraphs 3.C. and 3.E. in these accomplishment
instructions are Required for Compliance (RC) and must be done to comply with the AD.
T o allow more flexibility, the rule "refer to" and "in accordance with" will apply to these
paragraphs 3.C. and 3.E. Other paragraphs are recommended and may be deviated from,
done as part of other actions or done with accepted methods different from those given
in the Service Bulletin, as long as the RC paragraphs can be done and the aircraft can be
put back into a serviceable condition.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance necessary
to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, including Required for Compliance paragraph
contained herein, contact AIRBUS for further instructions and approval.
NOTE: Discarded parts must be managed at the operator's discretion.
A. TASK SET ASSOCIATED INFORMATION
Task Manpower
CONF 001
TOTAL MAN-HOURS 129.75 h

### Page 30

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 30
CONF 002
TOTAL MAN-HOURS 129.75 h
CONF 001
ELAPSED TIME (HOURS) 65.00 h
CONF 002
ELAPSED TIME (HOURS) 65.00 h
CONF ALL
B. PREPARATION
(1) Task A350-A-29-XX-P022-01001-540A-A (A350-A-29-XX-P022-01ZZZ-540Z-A)
Job Set-Up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 29.00 h
Minimum Number of person 2
Elapsed Time 14.50 h
Referenced Information
Manuals/Drawings References/Sheets
ASR A350-A-51-42-XX-01ZZZ-667Z-A
INTRO A350-A-00-61-04-11ZZZ-018Z-D
MP
A350-A-12-XX-XX-00ZZZ-170Z-A
A350-A-21-2X-XX-00ZZZ-520Z-A
A350-A-24-41-XX-00ZZZ-170Z-A
A350-A-29-XX-XX-02ZZZ-170Z-A
A350-A-32-22-XX-00ZZZ-397Z-A
A350-A-32-5X-XX-00ZZZ-398Z-A
A350-A-49-42-54-01ZZZ-520Z-A
A350-A-53-12-75-00ZZZ-520Z-A
A350-A-53-XX-XX-03ZZZ-520Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-3X-XX-01ZZZ-04CZ-A
Procedure
NOTE: For the basic Aircraft configuration, refer to Ref. INTRO A350-A-00-61-04-
11ZZZ-018Z-D "Maintenance Procedure - Introduction".
(a) Standard practices given in this procedure:
1 For identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-XX-01ZZZ-
04CZ-A.
3 Obey the general rules for removal and installation procedures for the
hydraulic systems, refer to Ref. MP A350-A-29-XX-XX-02ZZZ-170Z-A.
4 Remove and install fasteners in accordance with Ref. ASR A350-A-51-42-XX-
01ZZZ-667Z-A.
5 T ag all the parts you must remove and retain to make the subsequent
installation easier.
6 Put all the retained hardware in identified plastic bags and attach the bags
to the related unit.

### Page 31

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 31
(b) Make sure that the aircraft is electrically grounded, refer to Ref. MP A350-A-24-
41-XX-00ZZZ-170Z-A.
(c) Get access to the avionics compartment, refer to Ref. MP A350-A-12-XX-XX-
00ZZZ-170Z-A.
(d) Loose the studs to remove the protective panels of the equipment bay 1000VU,
refer to Ref. Fig.BF Removal of the Protective Panels of the Equipment Bay
1000VU:
1 PANEL   Item (37) Retain
1 PANEL   Item (38) Retain
3 PANEL   Item (39) Retain
1 PANEL   Item (40) Retain
(e) Loose the studs to remove the protective panels of the equipment bay 1200VU,
refer to Ref. Fig.BG Removal of the Protective Panels of the Equipment Bay
1200VU:
1 PANEL   Item (41) Retain
(f) Remove the avionics compartment floor panels as necessary between Frame 12
and Frame 18, refer to Ref. MP A350-A-53-12-75-00ZZZ-520Z-A.
(g) Remove the cargo-compartment floor Panel 132CAF and floor Panel 132DAF for
access, refer to Ref. MP A350-A-53-XX-XX-03ZZZ-520Z-A.
(h) If necessary, remove the air-conditioning ducts for access, refer to Ref. MP A350-
A-21-2X-XX-00ZZZ-520Z-A.
(i) If necessary, remove any ramp and their attached electrical wiring for access
between Frame 12 and Frame 22.
(j) Remove the Starter Generator Control Unit (SGCU) for access, refer to Ref. MP
A350-A-49-42-54-01ZZZ-520Z-A.
(k) Remove the tube covers and their electrical bonding connections:
Refer to Ref. Fig.BA Removal of the T ube Covers
1 Remove the tube covers item (24), item (25), item (26), item (27) and item
(28):
1 COVER ASSY   Item (24) Retain
1 COVER ASSY   Item (25) Retain
1 COVER ASSY   Item (26) Retain
1 COVER ASSY   Item (27) Retain
1 COVER ASSY   Item (28) Retain
attached with:
2 BOLT   Item (31) Retain
10 BOLT   Item (30) Retain
12 WASHER   Item (11) Discard
2 NUT-CLIP   Item (32) Discard

### Page 32

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 32
2 Remove the electrical bondings as shown on Ref. Fig.BA Sol.AA SHEET 2
Removal of the T ube Covers view C and view D:
1 BOLT   Item (31) Retain
1 WASHER   Item (11) Discard
1 NUT SELF-LOCKING   Item (12) Discard
3 Remove the tube cover, item (29):
1 COVER ASSY   Item (29) Retain
2 BOLT   Item (30) Retain
2 WASHER   Item (11) Discard
(l) Get access to the Nose Landing Gear (NLG) bay:
1 Put an access platform in position below the NLG bay.
2 If necessary, open the NLG door for access, refer to Ref. MP A350-A-32-22-
XX-00ZZZ-397Z-A.
3 Deactivate the Nose Wheel Steering (NWS) system, refer to Ref. MP A350-
A-32-5X-XX-00ZZZ-398Z-A.

### Page 33

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP022-A-FAPE3-05HLW-A-001-01 Fig.BF Sol.AA SHEET 1/1
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22
Removal of the Protective Panels
of the Equipment Bay 1000VU Page 33
CONF ALL
Z120
FR19
FR0
FWD AVIONICS
COMPARTMENT DOOR
A
A
1000VU
(37)
(38)
(39)
(40)
ICN-A350-A-29XXP022-A-FAPE3-05HLW-A-001-01

### Page 34

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP022-A-FAPE3-05HLV-A-001-01 Fig.BG Sol.AA SHEET 1/1
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22
Removal of the Cover-Installation Protection
Page 34
CONF ALL
Z120
A
FR19
FR0
FWD AVIONICS
COMPARTMENT DOOR
A
1200VU
(41)
ICN-A350-A-29XXP022-A-FAPE3-05HLV-A-001-01

### Page 35

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP022-A-FAPE3-04OJJ-A-001-01 Fig.BA Sol.AA SHEET 1/2
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22
Removal of the T ube Covers
Page 35
CONF ALL
C
FR0
FR20
A
FR13
FR18
A
B
(30)
(11)(24)
(25)
(27)
(28)
(26)
B
(30)
(11)
(30)
(11)
(30)
(11)(30)
(11)(31)
(11)
FR18
FR17
FR16
FR14
FR13(32)
(32)
PAX DOOR 1
ICN-A350-A-29XXP022-A-FAPE3-04OJJ-A-001-01

### Page 36

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP022-A-FAPE3-04OJK-A-001-01 Fig.BA Sol.AA SHEET 2/2
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22
Removal of the T ube Covers
Page 36
CONF ALL
D
(29)
(30)
(11)
C
(11)
(31)
D
(12)
ICN-A350-A-29XXP022-A-FAPE3-04OJK-A-001-01

### Page 37

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 37
C. PROCEDURE
CONF 001
(1) Task A350-A-29-XX-P022-01001-520A-A (A350-A-29-XX-P022-01ZZZ-520Z-A)
Remove the Yellow Hydraulic Tubes between Frame 12 and Frame 22
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
120 Work location From Frame 12 to Frame 18
130 Work location From Frame 18 to Frame 22
Manpower/Resources/Skills
Man-hours 16.00 h
Minimum Number of person 2
Elapsed Time 8.00 h
Skills Airframe
Material necessary to do the job
Consumables
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
08BAA9 Non Aqueous Cleaner -General
14SBA1 T extile - Lint free Cotton
Referenced Information
Manuals/Drawings References/Sheets
ASR A350-A-51-42-XX-01ZZZ-667Z-A
MP A350-A-29-XX-XX-02ZZZ-170Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-3X-XX-01ZZZ-04CZ-A
CML CONSUMABLE MATERIAL LIST (CML)
Procedure
(a) Standard practices given in this procedure:
1 For identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-XX-01ZZZ-
04CZ-A.
3 Remove and install fasteners in accordance with Ref. ASR A350-A-51-42-XX-
01ZZZ-667Z-A.
4 Put all the retained hardware in identified plastic bags and attach the bags
to the related unit.
5 Obey the general rules for removal and installation procedures for the
hydraulic systems, refer to Ref. MP A350-A-29-XX-XX-02ZZZ-170Z-A.
6 For the specification of Material application codes given in this Service
Bulletin, refer to Ref. CML.

### Page 38

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 38
7 Put a container in position below the component to collect the hydraulic
fluid.
(b) Remove the clamp, item (36):
Refer to Ref. Fig.BB Sol.AA SHEET 1 Removal of the Yellow Hydraulic T ubes and
Ref. Fig.BB Sol.AA SHEET 3 Removal of the Yellow Hydraulic T ubes view H.
1 CLAMP   Item (36) Discard
1 BOLT   Item (44) Discard
1 NUT   Item (45) Discard
(c) Remove the clamps, item (15), between Frame 12 and Frame 20:
Refer to Ref. Fig.BB Sol.AA SHEET 1 Removal of the Yellow Hydraulic T ubes and
Ref. Fig.BB Sol.AA SHEET 2 Removal of the Yellow Hydraulic T ubes view D.
4 CLAMP   Item (15) Retain
8 BOLT-HEXAGON HEAD   Item (8) Discard
8 WASHER   Item (11) Discard
(d) Remove the clamp, item (15), attached to the fitting in Frame 21:
Refer to Ref. Fig.BB Sol.AA SHEET 1 Removal of the Yellow Hydraulic T ubes and
Ref. Fig.BB Sol.AA SHEET 4 Removal of the Yellow Hydraulic T ubes view J.
1 CLAMP   Item (15) Retain
2 BOLT   Item (46) Retain
2 WASHER   Item (11) Discard
(e) Remove the blocks-clamping, item (6), between frames:
Refer to Ref. Fig.BB Sol.AA SHEET 1 Removal of the Yellow Hydraulic T ubes and
Ref. Fig.BB Sol.AA SHEET 3 Removal of the Yellow Hydraulic T ubes view F
4 BLOCK-CLAMPING   Item (6) Retain
8 BOLT-HEXAGON HEAD   Item (10) Retain
8 WASHER   Item (11) Discard
8 NUT SELF-LOCKING   Item (12) Discard
(f) Remove the blocks-clamping, item (6), attached to the frame fittings:
Refer to Ref. Fig.BB Sol.AA SHEET 1 Removal of the Yellow Hydraulic T ubes and
Ref. Fig.BB Sol.AA SHEET 3 Removal of the Yellow Hydraulic T ubes view E
5 BLOCK-CLAMPING   Item (6) Retain
10 BOLT-HEXAGON HEAD   Item (10) Discard
10 WASHER   Item (11) Discard
(g) Do a pre-cut of the hydraulic tube, item (34), to the rough needed length.
Refer to Ref. Fig.BB Sol.AA SHEET 1 Removal of the Yellow Hydraulic T ubes and
Ref. Fig.BB Sol.AA SHEET 4 Removal of the Yellow Hydraulic T ubes view K.
NOTE: The cutting is necessary to make the installation of the tube, item
48, possible. The accurate needed length is obtained later during the
procedure.

### Page 39

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 39
(h) Remove the hydraulic tubes and their union parts:
Refer to Ref. Fig.BB Sol.AA SHEET 1 Removal of the Yellow Hydraulic T ubes, Ref.
Fig.BB Sol.AA SHEET 2 Removal of the Yellow Hydraulic T ubes view C and Ref.
Fig.BB Sol.AA SHEET 3 Removal of the Yellow Hydraulic T ubes view G.
NOTE: If necessary, use a cutting tool in order to remove any hydraulic tube.
NOTE: Discard the tube, item (34), from the cut position to the forward.
1 TUBE V2911009700000 Item (1) Discard
1 TUBE V2911009600000 Item (2) Discard
1 TUBE V2911009100000 Item (3) Discard
1 TUBE V2911009200000 Item (4) Discard
1 TUBE V2911015000000 Item (33) Discard
1 TUBE V2911014700000 Item (5) Discard
1 TUBE V2919007000000 Item (34) Retain
5 UNION-SWAGED   Item (16) Discard
1 ELBOW   Item (17) Discard
(i) Remove the union, item (7), attached to the bulkhead, Frame 12:
Refer to Ref. Fig.BB Sol.AA SHEET 1 Removal of the Yellow Hydraulic T ubes and
Ref. Fig.BB Sol.AA SHEET 2 Removal of the Yellow Hydraulic T ubes view B
1 Disconnect the tube, item (47), from the union, item (7), on the other side
of the bulkhead, Frame 12.
1 TUBE   Item (47) Retain
NOTE: Access to the tube through NLG bay.
2 Put a blanking plug on the disconnected line end of the tube, item (47).
3 Remove the union, item (7), attached to the bulkhead, Frame 12:
NOTE: If necessary, use a cutting tool in order to remove any hydraulic
tube.
1 UNION   Item (7) Discard
3 BOLT   Item (9) Discard
3 WASHER   Item (11) Discard
3 NUT SELF-LOCKING   Item (12) Discard
NOTE: Access to the nut through NLG bay.
4 Clean the area with:
  Non Aqueous Cleaner -
General
08BAA9  
and
  T extile - Lint free Cotton14SBA1

### Page 40

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP022-A-FAPE3-04OJG-A-002-01 Fig.BB Sol.AA SHEET 1/4
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22
Removal of the Yellow Hydraulic T ubes
Page 40
CONF 001
G
F
F
F
E
E
B
A
FWD CARGO DOOR
Z120
Z130
FR12
FR21
FR27
FR12
FR13
FR14
FR16
FR17
FR19
FR18
FR20
A
C D
C E
F
C
D
(2)
(5)
(1)
(3)
(4)
C
D
D
EHE
(34)
(33)
K
T-CONNECTION
FR21
J
C
ICN-A350-A-29XXP022-A-FAPE3-04OJG-A-002-01

### Page 41

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP022-A-FAPE3-04OJH-A-002-01 Fig.BB Sol.AA SHEET 2/4
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22
Removal of the Yellow Hydraulic T ubes
Page 41
CONF 001
(12)
(7)
B
(16)
C
TYPICAL VIEW
(8)
(11)
(15)
TYPICAL VIEW
D
(11)
(9)
(47)
NOTE:
01 DISCONNECT THE TUBE, ITEM (47), FROM THE UNION, ITEM (7),
ON THE OTHER SIDE OF THE BULKHEAD.
01
ICN-A350-A-29XXP022-A-FAPE3-04OJH-A-002-01

### Page 42

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP022-A-FAPE3-04OJI-A-002-01 Fig.BB Sol.AA SHEET 3/4
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22
Removal of the Yellow Hydraulic T ubes
Page 42
CONF 001
(6)
(11)
(10)
TYPICAL VIEW
F
(12)
(17)
(6)
E
(11)
TYPICAL VIEW
(10)
G
(36)
(44)
(45)
H
ICN-A350-A-29XXP022-A-FAPE3-04OJI-A-002-01

### Page 43

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP022-A-FAPE3-06N4L-A-002-01 Fig.BB Sol.AA SHEET 4/4
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22
Removal of the Yellow Hydraulic T ubes
Page 43
CONF 001
(46)
(11)
(15)
J
FWD
T-CONNECTION
(34)
120 mm
(4.724 in)
02
NOTE:
CUT ITEM (34) ROUGHLY AT THIS POINT TO MAKE THE INSTALLATION POSSIBLE.02
K
CUTLINE
BEND END
ICN-A350-A-29XXP022-A-FAPE3-06N4L-A-002-01

### Page 44

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 44
CONF 002
(1) Task A350-A-29-XX-P022-01003-520A-A (A350-A-29-XX-P022-01ZZZ-520Z-A)
Remove the Yellow Hydraulic Tubes between Frame 12 and Frame 22
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
120 Work location From Frame 12 to Frame 18
130 Work location From Frame 18 to Frame 22
Manpower/Resources/Skills
Man-hours 16.00 h
Minimum Number of person 2
Elapsed Time 8.00 h
Skills Airframe
Material necessary to do the job
Consumables
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
08BAA9 Non Aqueous Cleaner -General
14SBA1 T extile - Lint free Cotton
Referenced Information
Manuals/Drawings References/Sheets
ASR A350-A-51-42-XX-01ZZZ-667Z-A
MP A350-A-29-XX-XX-02ZZZ-170Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-3X-XX-01ZZZ-04CZ-A
CML CONSUMABLE MATERIAL LIST (CML)
Procedure
(a) Standard practices given in this procedure:
1 For identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-XX-01ZZZ-
04CZ-A.
3 Remove and install fasteners in accordance with Ref. ASR A350-A-51-42-XX-
01ZZZ-667Z-A.
4 Put all the retained hardware in identified plastic bags and attach the bags
to the related unit.
5 Obey the general rules for removal and installation procedures for the
hydraulic systems, refer to Ref. MP A350-A-29-XX-XX-02ZZZ-170Z-A.
6 For the specification of Material application codes given in this Service
Bulletin, refer to Ref. CML.
7 Put a container in position below the component to collect the hydraulic
fluid.

### Page 45

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 45
(b) Remove the clamp, item (36):
Refer to Ref. Fig.BB Sol.AB SHEET 1 Removal of the Yellow Hydraulic T ubes and
Ref. Fig.BB Sol.AB SHEET 3 Removal of the Yellow Hydraulic T ubes view H.
1 CLAMP   Item (36) Discard
1 BOLT   Item (44) Discard
1 NUT   Item (45) Discard
(c) Remove the clamps, item (15), between Frame 12 and Frame 20:
Refer to Ref. Fig.BB Sol.AB SHEET 1 Removal of the Yellow Hydraulic T ubes, Ref.
Fig.BB Sol.AB SHEET 2 Removal of the Yellow Hydraulic T ubes view D and Ref.
Fig.BB Sol.AB SHEET 4 Removal of the Yellow Hydraulic T ubes view J.
4 CLAMP   Item (15) Retain
6 BOLT-HEXAGON HEAD   Item (8) Retain
2 BOLT-HEXAHGON HEAD   Item (49) Retain
8 WASHER   Item (11) Discard
(d) Remove the clamp, item (15), attached to the fitting in Frame 21:
Refer to Ref. Fig.BB Sol.AB SHEET 1 Removal of the Yellow Hydraulic T ubes and
Ref. Fig.BB Sol.AB SHEET 4 Removal of the Yellow Hydraulic T ubes view K.
1 CLAMP   Item (15) Retain
2 BOLT   Item (46) Retain
2 WASHER   Item (11) Discard
(e) Remove the blocks-clamping, item (6), between frames:
Refer to Ref. Fig.BB Sol.AB SHEET 1 Removal of the Yellow Hydraulic T ubes and
Ref. Fig.BB Sol.AB SHEET 3 Removal of the Yellow Hydraulic T ubes view F .
4 BLOCK-CLAMPING   Item (6) Retain
8 BOLT-HEXAGON HEAD   Item (10) Retain
8 WASHER   Item (11) Discard
8 NUT SELF-LOCKING   Item (12) Discard
(f) Remove the blocks-clamping, item (6), attached to the frame fittings:
Refer to Ref. Fig.BB Sol.AB SHEET 1 Removal of the Yellow Hydraulic T ubes and
Ref. Fig.BB Sol.AB SHEET 3 Removal of the Yellow Hydraulic T ubes view E.
5 BLOCK-CLAMPING   Item (6) Retain
10 BOLT-HEXAGON HEAD   Item (10) Retain
10 WASHER   Item (11) Discard
(g) Do a pre-cut of the hydraulic tube, item (34), to the rough needed length.
Refer to Ref. Fig.BB Sol.AB SHEET 1 Removal of the Yellow Hydraulic T ubes and
Ref. Fig.BB Sol.AB SHEET 4 Removal of the Yellow Hydraulic T ubes view L.
NOTE: The cutting is necessary to make the installation of the tube, item
48, possible. The accurate needed length is obtained later during the
procedure.

### Page 46

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 46
(h) Remove the hydraulic tubes and their union parts:
Refer to Ref. Fig.BB Sol.AB SHEET 1 Removal of the Yellow Hydraulic T ubes, Ref.
Fig.BB Sol.AB SHEET 2 Removal of the Yellow Hydraulic T ubes view C and Ref.
Fig.BB Sol.AB SHEET 3 Removal of the Yellow Hydraulic T ubes view G.
NOTE: If necessary, use a cutting tool in order to remove any hydraulic tube.
NOTE: Discard the tube, item (34), from the cut position to the forward.
1 TUBE V2911009700000 Item (1) Discard
1 TUBE V2911009600000 Item (2) Discard
1 TUBE V2911009100000 Item (3) Discard
1 TUBE V2911009200000 Item (4) Discard
1 TUBE V2911009400000 Item (33) Discard
1 TUBE V2911014600000 Item (43) Discard
1 TUBE V2911014700000 Item (5) Discard
1 TUBE V2919007000000 Item (34) Retain
6 UNION-SWAGED   Item (16) Discard
1 ELBOW   Item (17) Discard
(i) Remove the union, item (7), attached to the bulkhead, Frame 12:
Refer to Ref. Fig.BB Sol.AB SHEET 1 Removal of the Yellow Hydraulic T ubes and
Ref. Fig.BB Sol.AB SHEET 2 Removal of the Yellow Hydraulic T ubes view B.
1 Disconnect the tube, item (47), from the union, item (7), on the other side
of the bulkhead, Frame 12.
1 TUBE   Item (47) Retain
NOTE: Access to the tube through NLG bay.
2 Put a blanking plug on the disconnected line end of the tube, item (47).
3 Remove the union, item (7), attached to the bulkhead, Frame 12:
NOTE: If necessary, use a cutting tool in order to remove any hydraulic
tube.
1 UNION   Item (7) Discard
3 BOLT   Item (9) Discard
3 WASHER   Item (11) Discard
3 NUT SELF-LOCKING   Item (12) Discard
NOTE: Access to the nut through NLG bay.
4 Clean the area with:
  Non Aqueous Cleaner -
General
08BAA9  
and

### Page 47

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 47
  T extile - Lint free Cotton14SBA1

### Page 48

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP022-A-FAPE3-06N4D-A-001-01 Fig.BB Sol.AB SHEET 1/4
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22
Removal of the Yellow Hydraulic T ubes
Page 48
CONF 002
L
G
F
F
F
E
E
B
FWD CARGO DOOR
Z120
Z130
FR12
FR21
FR27
FR12
FR13
FR14
FR16
FR17
FR19
FR18
FR20
A
C D
C E
F
C
D
(2)
(5)
(1)
(3)
(4)
C
J
D
EHE
(33) C
(43)
(34)
T-CONNECTION
FR21
K
A
C
ICN-A350-A-29XXP022-A-FAPE3-06N4D-A-001-01

### Page 49

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP022-A-FAPE3-06N4E-A-001-01 Fig.BB Sol.AB SHEET 2/4
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22
Removal of the Yellow Hydraulic T ubes
Page 49
CONF 002
(12)
(7)
B
(16)
C
TYPICAL VIEW
(8)
(11)
(15)
TYPICAL VIEW
D
(11)
(9)
(47)
NOTE:
01 DISCONNECT THE TUBE, ITEM (47), FROM THE UNION, ITEM (7),
ON THE OTHER SIDE OF THE BULKHEAD.
01
ICN-A350-A-29XXP022-A-FAPE3-06N4E-A-001-01

### Page 50

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP022-A-FAPE3-06N4F-A-001-01 Fig.BB Sol.AB SHEET 3/4
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22
Removal of the Yellow Hydraulic T ubes
Page 50
CONF 002
(6)
(11)
(10)
TYPICAL VIEW
F
(12)
(17)
(6)
E
(11)
TYPICAL VIEW
(10)
G
(36)
(44)
(45)
H
ICN-A350-A-29XXP022-A-FAPE3-06N4F-A-001-01

### Page 51

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP022-A-FAPE3-06N4G-A-002-01 Fig.BB Sol.AB SHEET 4/4
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22
Removal of the Yellow Hydraulic T ubes
Page 51
CONF 002
NOTE:
CUT ITEM (34) ROUGHLY AT THIS POINT TO MAKE THE INSTALLATION POSSIBLE.02
FWD L
(46)
(11)
K
T-CONNECTION
(34)
02CUTLINE
(49)
(11)
(15)
J
(15)
120 mm
(4.724 in)
BEND END
ICN-A350-A-29XXP022-A-FAPE3-06N4G-A-002-01

### Page 52

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 52
CONF 001
(2) Task A350-A-29-XX-P022-01001-720A-A (A350-A-29-XX-P022-01ZZZ-720Z-A)
Install the Yellow Hydraulic Tubes between Frame 12 and Frame 22
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
120 Work location From Frame 12 to Frame 18
130 Work location From Frame 18 to Frame 22
Manpower/Resources/Skills
Man-hours 38.00 h
Minimum Number of person 2
Elapsed Time 19.00 h
Skills Airframe
Material necessary to do the job
Consumables
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
04QAC5
Coating - - Corrosion
Inhibiting Fastener Head
Protection
04SBA3 Varnish Polyurethane - LowVOC - External Structure
06AAB1 Polysulfide Sealant -General Purpose Fillet
06AAC1 Polysulfide Sealant -General Purpose Interfay
06ACA1
Polysulfide Sealant - Low
Density MultiPurpose
Brushable
06LCB1
Non Hardening Jointing
Putty - Medium T emp. Area
Chromate Free
12ABC1
Corrosion Preventive
Compound - Water
Displacing Soft Film
Part kit 29P022D01R01
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
1 V2911015100000 1 TUBE
2 V2911015200000 1 TUBE
3 V2911015300000 1 TUBE
4 V2911015400000 1 TUBE
5 V2911015700000 1 TUBE
7 ABS1125-10 1 UNION
9 ABS0114T3-9 3 BOLT
11 NAS1149C0332R 5 WASHER

### Page 53

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 53
Part kit 29P022D01R01
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
12 NAS1726C3PE 3 NUT
16 ABS0478-1010 5 UNION
17 NSA855007-10 1 ELBOW
19 NSA5191-3V9 8 BOLT
20 ABS0114V3-26 10 BOLT
21 NAS1149D0332K 18 WASHER
22 NAS1149E0332P 8 WASHER
23 NAS1726C3E 8 NUT
33 V2911015000000 1 TUBE
36 NSA5575-8A 1 CLAMP
42 NSA855006-10 1 UNION
44 NSA5191-3-10 1 BOLT
45 NAS509-3C 1 NUT
48 V2919013200000 1 TUBE
Referenced Information
Manuals/Drawings References/Sheets
ASR
A350-A-51-23-12-01ZZZ-667Z-A
A350-A-51-24-XX-01ZZZ-667Z-A
A350-A-51-42-XX-01ZZZ-667Z-A
A350-A-51-43-XX-01ZZZ-667Z-A
A350-A-51-4X-XX-01ZZZ-667Z-A
ESP A350-A-20-33-42-01ZZZ-041Z-AA350-A-20-51-50-01ZZZ-042Z-A
MP
A350-A-20-51-50-01ZZZ-25BZ-A
A350-A-20-51-61-00ZZZ-25BZ-A
A350-A-20-51-61-08ZZZ-25BZ-A
A350-A-29-XX-XX-02ZZZ-170Z-A
SD A350-A-06-2X-XX-01ZZZ-04CZ-AA350-A-06-3X-XX-01ZZZ-04CZ-A
CML CONSUMABLE MATERIAL LIST (CML)
PMS
01-04-58
01-06-12
01-07-117
Procedure
(a) Standard practices given in this procedure:
1 For identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-04CZ-A.
2 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-XX-01ZZZ-
04CZ-A.
3 For the specification of material application codes given in this Service
Bulletin, refer to the Ref. CML.
4 Remove and install fasteners in accordance with Ref. ASR A350-A-51-42-XX-
01ZZZ-667Z-A.

### Page 54

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 54
5 Get alternative and substitute fastener data in accordance with Ref. ASR
A350-A-51-43-XX-01ZZZ-667Z-A.
6 If alternative and substitute fasteners have to be used, you must make
sure that the associated nut/collar are compatible in accordance with Ref.
ASR A350-A-51-4X-XX-01ZZZ-667Z-A.
7 If the length of any fastener specified in this Service Bulletin does not meet
installation standards given in ASR Data Module 51-4, then a fastener of
the same specification, or an approved substitute, with a length which
meets the installation standards given in ASR Data Module 51-4 may be
used. In addition, washers may be installed for fastener grip length in
accordance with ASR Data Module 51-4.
8 T o torque tighten the electrical and mechanical connections, refer to Ref.
ESP A350-A-20-51-50-01ZZZ-042Z-A.
9 Adapt the clamp size as necessary, refer to Ref. ESP A350-A-20-33-42-
01ZZZ-041Z-A.
10 Obey the general rules for removal and installation procedures for the
hydraulic systems, refer to Ref. MP A350-A-29-XX-XX-02ZZZ-170Z-A.
11 For Standard Mechanical T orques, refer to Ref. MP A350-A-20-51-50-01ZZZ-
25BZ-A.
12 Apply sealant in accordance with Ref. ASR A350-A-51-24-XX-01ZZZ-667Z-A.
13 Apply the preventive corrosion compound material in accordance with Ref.
ASR A350-A-51-23-12-01ZZZ-667Z-A.
14 For the electrical bonding, refer to Ref. PMS 01-04-58 and Ref. PMS 01-07-
117.
15 Obey the general rules for installation of the hydraulic lines, refer to Ref.
MP A350-A-20-51-61-00ZZZ-25BZ-A.
16 For the swage installation of the hydraulic lines, refer to Ref. MP A350-A-20-
51-61-08ZZZ-25BZ-A.
(b) Install the union, item 7, to the bulkhead Frame 12:
Refer to Ref. Fig.BC Sol.AA SHEET 1 Installation of the Yellow Hydraulic T ubes and
Ref. Fig.BC Sol.AA SHEET 2 Installation of the Yellow Hydraulic T ubes view B.
1 Apply interfay sealant on the union, item 7, using:
  Polysulfide Sealant
- General Purpose
Interfay
06AAC1  
2 Install the union, item 7:
1 UNION SWAGED ABS1125-10 Item 7
3 BOLT-HEXAGON HEAD ABS0114T3-9 Item 9
3 WASHER NAS1149C0332R Item 11
3 NUT NAS1726C3PE Item 12
NOTE: Access to the nut through NLG bay.
3 Do the bonding test, refer to Ref. Appendix ELECTRICAL BONDING/
GROUNDING CODE EXPLANATION.

### Page 55

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 55
4 Do the electrical bonding, refer to Ref. Appendix ELECTRICAL BONDING/
GROUNDING CODE EXPLANATION, use:
  Coating - - Corrosion
Inhibiting Fastener Head
Protection
04QAC5  
  Polysulfide Sealant
- Low Density
MultiPurpose Brushable
06ACA1  
5 Overcoat the fasteners except for electrical bonding points with:
  Polysulfide Sealant
- Low Density
MultiPurpose Brushable
06ACA1  
6 Apply sealant bead material around the edges of the union, item 7:
  Polysulfide Sealant -
General Purpose Fillet
06AAB1  
7 Remove the blanking plug from the line end of the tube, item (47).
8 Connect the tube, item (47), at the union, item 7, on the other side of the
bulkhead, Frame 12.
1 TUBE   Item (47) Retained
NOTE: Access to the tube through NLG bay.
(c) Connect the tubes and their unions from Frame 12 to Frame 22:
Refer to Ref. Fig.BC Sol.AA SHEET 1 Installation of the Yellow Hydraulic T ubes,
Ref. Fig.BC Sol.AA SHEET 2 Installation of the Yellow Hydraulic T ubes view C and
Ref. Fig.BC Sol.AA SHEET 3 Installation of the Yellow Hydraulic T ubes view G.
NOTE: The installation of the tubes and unions start from the front and
progress towards the aft.
CAUTION: TO ENSURE THE CORRECT POSITION OF THE HYDRAULIC
TUBES, DO NOT SWAGE ANY CONNECTIONS UNTIL THE
INSTALLATION IS COMPLETED.
1 Put temporarily in position to identify the visible side of the tube.
1 TUBE V2911015100000 Item 1
1 TUBE V2911015200000 Item 2
1 TUBE V2911015300000 Item 3
1 TUBE V2911015400000 Item 4
1 TUBE V2911015000000 Item 33
1 TUBE V2911015700000 Item 5
1 TUBE ASSY V2919013200000 Item 48

### Page 56

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 56
2 Mark the end of the hydraulic tubes with the marking gage so that the
markings are visible when in position.
NOTE: These markings are to make sure the swaging of the tubes are
done correctly.
3 Connect the tubes, item 1, item 2, item 3, item 4, item 33, item 5 and item
48, and their unions from Frame 12 to Frame 22.
5 UNION-SWAGED ABS0478-1010 Item 16
1 ELBOW NSA855007-10 Item 17
(d) Install the blocks-clamping and the clamps from Frame 12 to Frame 22.
Refer to Ref. Fig.BC Sol.AA SHEET 1 Installation of the Yellow Hydraulic T ubes,
Ref. Fig.BC Sol.AA SHEET 2 Installation of the Yellow Hydraulic T ubes view D, Ref.
Fig.BC Sol.AA SHEET 3 Installation of the Yellow Hydraulic T ubes view E, view F,
view H and Ref. Fig.BC Sol.AA SHEET 4 Installation of the Yellow Hydraulic T ubes
view J.
NOTE: The installation of the blocks-clamping and the clamps start from
the front and progress towards the aft to make sure everything stays
aligned and without tension before swaging the tubes.
1 Install the blocks-clamping and the clamps between Frame 12 and Frame
20.
9 BLOCK-CLAMPING   Item (6) Retained
10 BOLT-HEXAGON HEAD ABS0114V3-26 Item 20
18 WASHER NAS1149D0332K Item 21
8 BOLT-HEXAGON HEAD   Item (10) Retained
8 NUT NAS1726C3E Item 23
4 CLAMP   Item (15) Retained
8 BOLT NSA5191-3V9 Item 19
8 WASHER NAS1149E0332P Item 22
1 CLAMP NSA5575-8A Item 36
1 BOLT NSA5191-3-10 Item 44
1 NUT NAS509-3C Item 45
NOTE: Do not tighten the bolts to final torque value, except for the clamp,
item 36.
2 Install the clamp, item (15), attached to the fitting in Frame 21:
1 CLAMP   Item (15) Retained
2 BOLT   Item (46) Retained
2 WASHER NAS1149C0332R Item 11
Wet-install using:

### Page 57

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 57
  Non Hardening Jointing
Putty - Medium T emp.
Area Chromate Free
06LCB1  
NOTE: Do not tighten the bolts to final torque value.
3 Do the bonding test, refer to Ref. Appendix ELECTRICAL BONDING/
GROUNDING CODE EXPLANATION.
4 Do the electrical bonding for the clamp, item 36, refer to Ref. Appendix
ELECTRICAL BONDING/GROUNDING CODE EXPLANATION, use:
  Coating - - Corrosion
Inhibiting Fastener Head
Protection
04QAC5  
(e) Connect the tube, item 48, and the old tube, item (34), with the union, item 42.
Refer to Ref. Fig.BC Sol.AA SHEET 1 Installation of the Yellow Hydraulic T ubes,
Ref. Fig.BC Sol.AA SHEET 4 Installation of the Yellow Hydraulic T ubes view K and
Ref. Fig.BC Sol.AA SHEET 5 Installation of the Yellow Hydraulic T ubes.
1 Cut the hydraulic tube, item 48, to the rough needed length.
Refer to Ref. Fig.BC Sol.AA SHEET 4 Installation of the Yellow Hydraulic
T ubes view K.
NOTE: The cutting is necessary to make the installation of the tubes
possible. The accurate needed length is obtained later during the
procedure.
2 Put to the correct length and mark the cutline at the hydraulic tubes, item
(34) and item 48.
Refer to Ref. Fig.BC Sol.AA SHEET 5 Installation of the Yellow Hydraulic
T ubes view L.
NOTE: Make sure that you find an accurate overlap point to ensure a
tension free installation.
NOTE: Before cutting, make sure that the straight length from the end of
the tube, item 48, to the bend end is greater than the minimum
distance given in the swage installation of the hydraulic lines, refer
to Ref. MP A350-A-20-51-61-08ZZZ-25BZ-A.
3 Cut the hydraulic tube, item (34).
1 TUBE V2919007000000 Item (34) Retained
4 Deburr the hydraulic tube, item (34).
5 Mark the end of the hydraulic tube, item (34), with the marking gage.
6 Cut the hydraulic tube, item 48.
7 Deburr the hydraulic tube, item 48.
8 Mark the end of the hydraulic tube, item 48, with the marking gage.
9 Insert the hydraulic tubes, item (34) and item 48, refer to Ref. MP A350-A-
20-51-61-08ZZZ-25BZ-A, into:
Refer to Ref. Fig.BC Sol.AA SHEET 5 Installation of the Yellow Hydraulic
T ubes view M, view N.
1 UNION NSA855006-10 Item 42

### Page 58

A350
SERVICE BULLETIN
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22 Page 58
10 T orque tighten the clamp at Frame 21.
(f) Check that all the assembly is stress free and aligned.
NOTE: Make sure that tubes and clamps are correctly installed.
(g) Final torque all block-clamping and clamp bolts starting from the front to the
back.
(h) Swage all the connections from Frame 12 to Frame 22.
NOTE: The swage of the connections start from the front and progress towards
the aft.
(i) Check that there is no damage to the unions.
(j) Check that the markings are visible for correct swaging.
(k) Do the bonding test when everything is swaged, refer to Ref. Appendix
ELECTRICAL BONDING/GROUNDING CODE EXPLANATION.
(l) Write the Service Bulletin number on the hydraulic tube, item (34), with a
permanent marker, refer to Ref. PMS 01-06-12, and protect with colorless top
coat, using:
  Varnish Polyurethane
- Low VOC - External
Structure
04SBA3  
(m) Apply the corrosion preventive compound material to the exposed surfaces:
  Corrosion Preventive
Compound - Water
Displacing Soft Film
12ABC1

### Page 59

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP022-A-FAPE3-04OJD-A-003-01 Fig.BC Sol.AA SHEET 1/5
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22
Installation of the Yellow Hydraulic T ubes
Page 59
CONF 001
G
F
F
F
E
E
A
FR12
FR13
FR14
FR16
FR17
FR19
FR18
FR20
C D
C E
F
C
D
2
5
1
3
4
C
FWD CARGO DOOR
Z120
Z130
FR12
FR21
FR27
A
E H E D
D
33
B
C K M
T-CONNECTION
48
FR21
J
(34)
NOTE:
APPLY CORROSION PREVENTIVE COMPOUND MATERIAL No 12ABC1 TO THE EXPOSED SURFACES.01
01
ICN-A350-A-29XXP022-A-FAPE3-04OJD-A-003-01

### Page 60

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP022-A-FAPE3-04OJE-A-003-01 Fig.BC Sol.AA SHEET 2/5
REV 00 Jan 28/22 A350-29-P022
REV 01 Sep 15/22
Installation of the Yellow Hydraulic T ubes
Page 60
CONF 001
12
7
B
16
C
TYPICAL VIEW
19
22
(15)
TYPICAL VIEW
D
11
9
11
9 _4C3M1 02
05
03
04
02 PROTECT WITH MATERIAL No 06ACA1 AND MATERIAL No 04QAC5.
03 APPLY INTERFAY SEALANT MATERIAL No 06AAC1.
ELECTRICAL BONDING
NOTE:
04
05 OVERCOAT THE FASTENERS WITH MATERIAL No 06ACA1.
APPLY SEALANT BEAD MATERIAL No 06AAB1 AROUND THE EDGES.
05
(47)06
06 CONNECT THE TUBE, ITEM (47), TO THE UNION, ITEM 7, ON THE OTHER
SIDE OF THE BULKHEAD WITH TORQUE. ICN-A350-A-29XXP022-A-FAPE3-04OJE-A-003-01

The text continues at https://openairdocs.org/service-documents/airbus/a350-29-p022/file/cf49c205cfba.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
