# Airbus Service Bulletin A350-29-P029

Copy: No revision named ("A350-29-P029"), 98 pages: PDF https://openairdocs.org/files/sha256/31/f6/31f6aec942857e2b09b27c3735b65e5fc857ae92aa1b9130dc9c2d9eb89c1ebc; text https://openairdocs.org/service-documents/airbus/a350-29-p029/file/31f6aec94285.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2021-0193; AD 2021-11-23 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A350-29-P029
- Page: https://openairdocs.org/service-documents/airbus/a350-29-p029

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2021-11-23](https://openairdocs.org/ad/2021-11-23.md), effective Sep 3, 2021: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/a350-29-p029/proposed.md).

## Text (98 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2021-0193; AD 2021-11-23 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 1
CONF ALL
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
 
The content of this document is the property of Airbus. All rights including copyrights are reserved.
It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may information
contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of the
copyright. Requests for reproduction of any data in this document and the media authorized for it must
be addressed to Airbus.
ATA SYSTEM: 29
TITLE: HYDRAULIC POWER - ELECTRICAL INSTALLATION - INTRODUCE NEW
HARDWARE PIN PROGRAMMING (HPP) AND ADAPT CASE DRAIN (CD)
MANIFOLDS WITH PT1000 SENSORS AIRCRAFT SERIES -900 WITH
WIRING PROVISIONS
MODIFICATION No.:
114075L44215
114077L48257
114535L44291
116162L44382

### Page 2

A350
SERVICE BULLETIN
SUMMARY
REV 00 Dec 16/20 A350-29-P029
Page 2
ATA SYSTEM: 29
TITLE: HYDRAULIC POWER - ELECTRICAL INSTALLATION - INTRODUCE NEW
HARDWARE PIN PROGRAMMING (HPP) AND ADAPT CASE DRAIN (CD)
MANIFOLDS WITH PT1000 SENSORS AIRCRAFT SERIES -900 WITH
WIRING PROVISIONS
SUMMARY
This summary is for information only and is not approved for modification of the aircraft.
A. MODIFICATIONS
MODIFICATION CLASSIFICATION
MAJOR 114075L44215 114535L44291
MINOR 114077L48257 116162L44382
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
B. REASON
(1) History
It has been identified that a severe case of EDP failure could lead to a rapid EDP
overheat that is not properly indicated by the Flight Warning System.
(2) Objective/Action
This Service Bulletin is published to advise the operator of the issuance of PARKER
HANNIFIN CORPORATION VSB (93835) 945193-29-525 and 945193–29–540 which
describes the modification of the case-drain filter manifolds by installing new dual
temperature sensors.
In addition this SB describes the introduction of a new Hydraulic Monitoring Control-
Application (HMCA) Std.5.0 and related Hardware PIN Programming (HPP). Also the
introduction of CPIOM-H3 Resource BITE Configuration T able (RBCT) and Maintenance
System Load (MSL) software B24 (MOD 114077).
(3) Advantages
Accomplishment of this Service Bulletin will partially recover remaining MMEL
limitations and cancel all CMR tasks introduced in Step 1 described in Ref. TFU
29.10.00.057.
(4) Operational/Maintenance Consequences
The Operational/Maintenance Consequences of this Service Bulletin are covered by
the update of the affected publications detailed in "PLANNING INFORMATION".
This Service Bulletin has an impact on flight operations documentation; consult
AirbusWorld and refer to MOI described in T echnical Follow-up (TFU) Ref. TFU
29.00.00.088.
C. GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE RECOMMENDED COST SAVING NO

### Page 3

A350
SERVICE BULLETIN
SUMMARY
REV 00 Dec 16/20 A350-29-P029
Page 3
EVALUATION TABLE
A/C OPERATION
AFFECTED
NO VENDOR SB YES
CANCELS INSPECTION SB NO ETOPS AFFECTED NO
PAX COMFORT AFFECTED NO POTENTIAL AD NO
RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO
LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO
NOTE: Service Bulletin recommended to be accomplished to prevent significant
operational disruptions.
D. MAINTENANCE CONFIGURATION
No specific aircraft maintenance configuration required.
E. MATERIAL PRICE INFORMATION
(1) Adapt the CD Manifolds with PT1000 Sensors
(a) T ask set A350-A-29-XX-P029-01000-93AA-A Adapt the CD Manifolds with PT1000
Sensors
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS
FLS kit 29P029N01R00 1 600.00 USD SOFTWARE
Components See SB See Note CABLE TIES, HEAT SHRINK
TUBING
Equipment See SB See Note  
NOTE: Price information to be obtained from the given supplier.
F. APPLICABILITY
This Service Bulletin is applicable to this (these) operator(s):
AAR AFR CHH CPA CSN ETH FBU FJI FWI JAL MAU SAS SIA TAM
G. CONCURRENT REQUIREMENTS
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this Service Bulletin:
Service Bulletin(s) Modification(s)
Ref. SB A350-42-P013  
NOTE: Service Bulletin No. A350–42–P013 (INTEGRATED MODULAR AVIONICS - AVIONICS
BATCH 6 - PART 2).
H. NATURE OF THE WORK
(1) Adapt the CD Manifolds with PT1000 Sensors
(a) T ask set A350-A-29-XX-P029-01000-93AA-A Adapt the CD Manifolds with PT1000
Sensors
AIRCRAFT YES

### Page 4

A350
SERVICE BULLETIN
SUMMARY
REV 00 Dec 16/20 A350-29-P029
Page 4
EQUIPMENT YES
I. MANPOWER
(1) Adapt the CD Manifolds with PT1000 Sensors
(a) T ask set A350-A-29-XX-P029-01000-93AA-A Adapt the CD Manifolds with PT1000
Sensors
MANPOWER
TOTAL MAN-HOURS 45.00 h
ELAPSED TIME (HOURS) 21.50 h
Additional man-hours related to Vendor SB; refer to:
Option 1 - Modify the Yellow CD Manifold
(FIN 23JX) on Aircraft
Ref. PARKER HANNIFIN CORPORATION
(93835) VSB 945193-29-525
Option 2 - Modify the Yellow CD Manifold
(FIN 23JX)
Ref. PARKER HANNIFIN
CORPORATION (93835) VSB
945193-29-540
BENCH
Option 1 - Modify the Yellow CD Manifold
(FIN 24JX) on Aircraft
Ref. PARKER HANNIFIN CORPORATION
(93835) VSB 945193-29-525
Option 2 - Modify the Yellow CD Manifold
(FIN 24JX)
Ref. PARKER HANNIFIN
CORPORATION (93835) VSB
945193-29-540
BENCH
Option 1 - Modify the Green CD Manifold
(FIN 21JX) on Aircraft
Ref. PARKER HANNIFIN CORPORATION
(93835) VSB 945193-29-525
Option 2 - Modify the Green CD Manifold
(FIN 21JX)
Ref. PARKER HANNIFIN
CORPORATION (93835) VSB
945193-29-540
BENCH
Option 1 - Modify the Green CD Manifold
(FIN 22JX) on Aircraft
Ref. PARKER HANNIFIN CORPORATION
(93835) VSB 945193-29-525
Option 2 - Modify the Green CD Manifold
(FIN 22JX)
Ref. PARKER HANNIFIN
CORPORATION (93835) VSB
945193-29-540
BENCH

### Page 5

A350
SERVICE BULLETIN
SUMMARY
Figure ICN-A350-A-29XXP029-A-FAPE3-05T7C-A-001-01 SHEET 1/1
REV 00 Dec 16/20 A350-29-P029Summary
Page 5
J. GENERAL OVERVIEW
CONF ALL
7JG1
7JG2
7JY1
7JY2
MODIFY OR
REPLACE MANIFOLD
MODIFY OR
A
REPLACE MANIFOLD
MODIFY OR
REPLACE MANIFOLD
MODIFY OR
REPLACE MANIFOLD
UPDATE 
SOFTWARE
A
Z210
Z600
Z500
ICN-A350-A-29XXP029-A-FAPE3-05T7C-A-001-01

### Page 6

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 6
ATA SYSTEM: 29
TITLE: HYDRAULIC POWER - ELECTRICAL INSTALLATION - INTRODUCE NEW
HARDWARE PIN PROGRAMMING (HPP) AND ADAPT CASE DRAIN (CD)
MANIFOLDS WITH PT1000 SENSORS AIRCRAFT SERIES -900 WITH
WIRING PROVISIONS
1. PLANNING INFORMATION
A. APPLICABILITY
NOTE: This modification is applicable by Service Bulletin only.
(1) Models
ON A/C 0316, 0318, 0320-0322, 0324, 0325, 0327-0329, 0331, 0333-0335, 0337, 0339, 0341,
0343-0345, 0347-0349, 0351, 0352, 0354, 0355, 0357-0359, 0363, 0364
350-941
CONF ALL
(2) Applicability by MSN
0316 0318 0320-0322 0324 0325 0327-0329 0331 0333-0335 0337 0339 0341 0343-
0345 0347-0349 0351 0352 0354 0355 0357-0359 0363 0364
(3) MSN by configuration
MSN CONFIGURATION
0316 0318 0320 0321 0322 0324 0325 0327 0328 0329 0331
0333 0334 0335 0337 0339 0341 0343 0344 0345 0347 0348
0349 0351 0352 0354 0355 0357 0358 0359 0363 0364
001
(4) Configuration definition
Configuration 001
CONF 001 is applicable for all the aircraft affected by this Service Bulletin as a
standard configuration.
CONF 001 retrofits following modifications: 114075L44215, 114077L48257,
114535L44291, 116162L44382.
B. CONCURRENT REQUIREMENTS
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of this Service Bulletin:
Service Bulletin(s) Modification(s)
Ref. SB A350-42-P013  
NOTE: Service Bulletin No. A350–42–P013 (INTEGRATED MODULAR AVIONICS - AVIONICS
BATCH 6 - PART 2).
C. REASON
(1) History
It has been identified that a severe case of EDP failure could lead to a rapid EDP
overheat that is not properly indicated by the Flight Warning System.

### Page 7

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 7
(2) Objective/Action
This Service Bulletin is published to advise the operator of the issuance of PARKER
HANNIFIN CORPORATION VSB (93835) 945193-29-525 and 945193–29–540 which
describes the modification of the case-drain filter manifolds by installing new dual
temperature sensors.
In addition this SB describes the introduction of a new Hydraulic Monitoring Control-
Application (HMCA) Std.5.0 and related Hardware PIN Programming (HPP). Also the
introduction of CPIOM-H3 Resource BITE Configuration T able (RBCT) and Maintenance
System Load (MSL) software B24 (MOD 114077).
(3) Advantages
Accomplishment of this Service Bulletin will partially recover remaining MMEL
limitations and cancel all CMR tasks introduced in Step 1 described in Ref. TFU
29.10.00.057.
(4) Operational/Maintenance Consequences
The Operational/Maintenance Consequences of this Service Bulletin are covered by
the update of the affected publications detailed in "PLANNING INFORMATION".
This Service Bulletin has an impact on flight operations documentation; consult
AirbusWorld and refer to MOI described in T echnical Follow-up (TFU) Ref. TFU
29.00.00.088.
D. DESCRIPTION
T o accomplish this Service Bulletin it is necessary to:
(1) Adapt the CD Manifolds with PT1000 Sensors
(a) T ask set A350-A-29-XX-P029-01000-93AA-A Adapt the CD Manifolds with PT1000
Sensors
1 Option 1 - Modify the Yellow CD Manifold (FIN 23JX) on Aircraft
2 Option 2 - Remove and Retain the Yellow CD Manifold (FIN 23JX)
3 Option 2 - Modify the Yellow CD Manifold (FIN 23JX)
4 Option 2 - Install the Modified Yellow CD Manifold (FIN 23JX)
5 Option 3 - Replace the Yellow CD Manifold (FIN 23JX)
6 Modify the Wing Wiring to the T emp XDCR (FIN 7JY1)
7 Option 1 - Modify the Yellow CD Manifold (FIN 24JX) on Aircraft
8 Option 2 - Remove and Retain the Yellow CD Manifold (FIN 24JX)
9 Option 2 - Modify the Yellow CD Manifold (FIN 24JX)
10 Option 2 - Install the Modified Yellow CD Manifold (FIN 24JX)
11 Option 3 - Replace the Yellow CD Manifold (FIN 24JX)
12 Modify the Wiring to the T emp XDCR (FIN 7JY2)
13 Option 1 - Modify the Green CD Manifold (FIN 21JX) on Aircraft
14 Option 2 - Remove and Retain the Green CD Manifold (FIN 21JX)
15 Option 2 - Modify the Green CD Manifold (FIN 21JX)
16 Option 2 - Install the Modified Green CD Manifold (FIN 21JX)
17 Option 3 - Replace the Green CD Manifold (FIN 21JX)
18 Modify the Wing Wiring to the T emp XDCR (FIN 7JG1)

### Page 8

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 8
19 Option 1 - Modify the Green CD Manifold (FIN 22JX) on Aircraft
20 Option 2 - Remove and Retain the Green CD Manifold (FIN 22JX)
21 Option 2 - Modify the Green CD Manifold (FIN 22JX)
22 Option 2 - Install the Modified Green CD Manifold (FIN 22JX)
23 Option 3 - Replace the Green CD Manifold (FIN 22JX)
24 Modify the Wing Wiring to the T emp XDCR (FIN 7JG2)
25 Modify the Wiring Bundles for the Avionics Rack (FIN 1100VU)
26 Modify the Wiring Bundles for the Avionics Rack (FIN 1200VU)
27 Install CPIOM-H3 Resource BITE Configuration T able Software, HMCA S5
software and MSL
E. COMPLIANCE
(1) Classification
RECOMMENDED: Service Bulletin recommended to be accomplished to prevent
significant operational disruptions.
(2) Accomplishment Timescale
Accomplishment of this Service Bulletin is recommended at the earliest opportunity
where manpower and facilities are available.
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organisation Approval No. EASA.21J.031.
If an aircraft listed in the applicability has a modification or repair embodied that is not
of AIRBUS origin, and which affects the content of this Service Bulletin, the operator
is responsible for obtaining approval by its airworthiness authority for any adaptation
necessary before incorporation of the Service Bulletin.
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Adapt the CD Manifolds with PT1000 Sensors
(a) T ask set A350-A-29-XX-P029-01000-93AA-A Adapt the CD Manifolds with PT1000
Sensors
PREPARATION
Job Set-Up 1.00 h
Get Access for the LH FLE 1.00 h
Get Access for the RH FLE 1.00 h
Get Access for the LH FTE 1.00 h
Get Access for the RH FTE 1.00 h
Get Access to the Avionics Compartment 1.00 h
PROCEDURE

### Page 9

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 9
Option 2 - Remove and Retain the Yellow CD Manifold (FIN
23JX)
1.00 h
Option 2 - Install the Modified Yellow CD Manifold (FIN 23JX) 1.00 h
Option 3 - Replace the Yellow CD Manifold (FIN 23JX) 2.00 h
Modify the Wing Wiring to the T emp XDCR (FIN 7JY1) 1.00 h
Option 2 - Remove and Retain the Yellow CD Manifold (FIN
24JX)
1.00 h
Option 2 - Install the Modified Yellow CD Manifold (FIN 24JX) 1.00 h
Option 3 - Replace the Yellow CD Manifold (FIN 24JX) 2.00 h
Modify the Wiring to the T emp XDCR (FIN 7JY2) 1.00 h
Option 2 - Remove and Retain the Green CD Manifold (FIN
21JX)
1.00 h
Option 2 - Install the Modified Green CD Manifold (FIN 21JX) 1.00 h
Option 3 - Replace the Green CD Manifold (FIN 21JX) 2.00 h
Modify the Wing Wiring to the T emp XDCR (FIN 7JG1) 1.00 h
Option 2 - Remove and Retain the Green CD Manifold (FIN
22JX)
1.00 h
Option 2 - Install the Modified Green CD Manifold (FIN 22JX) 1.00 h
Option 3 - Replace the Green CD Manifold (FIN 22JX) 2.00 h
Modify the Wing Wiring to the T emp XDCR (FIN 7JG2) 1.00 h
Modify the Wiring Bundles for the Avionics Rack (FIN
1100VU)
1.00 h
Modify the Wiring Bundles for the Avionics Rack (FIN
1200VU)
1.00 h
Install CPIOM-H3 Resource BITE Configuration T able
Software, HMCA S5 software and MSL
0.50 h
PREPARATION FOR TEST
Close the Circuit Breakers 0.50 h
TEST
T est 5.00 h
CLOSE-UP
Close-Up for the Avionics Compartment 2.00 h
Close-Up for the RH FTE 2.00 h
Close-Up for the LH FTE 2.00 h
Close-Up for the RH FLE 2.00 h
Close-Up for the LH FLE 2.00 h
Close-Up 1.00 h
TOTAL MAN-HOURS 45.00 h
ELAPSED TIME (HOURS) 21.50 h
Additional man-hours related to Vendor SB; refer to:
Option 1 - Modify the Yellow CD Manifold
(FIN 23JX) on Aircraft
Ref. PARKER HANNIFIN CORPORATION
(93835) VSB 945193-29-525
Option 2 - Modify the Yellow CD Manifold
(FIN 23JX)
Ref. PARKER HANNIFIN
CORPORATION (93835) VSB
945193-29-540
BENCH

### Page 10

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 10
Option 1 - Modify the Yellow CD Manifold
(FIN 24JX) on Aircraft
Ref. PARKER HANNIFIN CORPORATION
(93835) VSB 945193-29-525
Option 2 - Modify the Yellow CD Manifold
(FIN 24JX)
Ref. PARKER HANNIFIN
CORPORATION (93835) VSB
945193-29-540
BENCH
Option 1 - Modify the Green CD Manifold
(FIN 21JX) on Aircraft
Ref. PARKER HANNIFIN CORPORATION
(93835) VSB 945193-29-525
Option 2 - Modify the Green CD Manifold
(FIN 21JX)
Ref. PARKER HANNIFIN
CORPORATION (93835) VSB
945193-29-540
BENCH
Option 1 - Modify the Green CD Manifold
(FIN 22JX) on Aircraft
Ref. PARKER HANNIFIN CORPORATION
(93835) VSB 945193-29-525
Option 2 - Modify the Green CD Manifold
(FIN 22JX)
Ref. PARKER HANNIFIN
CORPORATION (93835) VSB
945193-29-540
BENCH
H. WEIGHT AND BALANCE
Not changed
I. ELECTRICAL LOAD DATA
Not changed
J. REFERENCES
CONCURRENT SERVICE BULLETIN (SB)
A350-42-P013
(1) Adapt the CD Manifolds with PT1000 Sensors
(a) T ask set A350-A-29-XX-P029-01000-93AA-A Adapt the CD Manifolds with PT1000
Sensors
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-42-XX-01ZZZ-667Z-A
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-32-23-01ZZZ-042Z-A A350-A-20-33-XX-01ZZZ-042Z-A
A350-A-20-33-30-01ZZZ-042Z-A A350-A-20-33-44-01ZZZ-041Z-A
A350-A-20-4X-XX-01ZZZ-042Z-A A350-A-20-52-10-01ZZZ-042Z-A
A350-A-20-52-20-01ZZZ-042Z-A A350-A-20-52-21-00ZZZ-36AZ-A
A350-A-20-54-50-01ZZZ-042Z-A A350-A-20-54-55-01ZZZ-042Z-A
A350-A-20-55-XX-01ZZZ-042Z-A A350-A-20-56-51-01ZZZ-04DZ-A
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP)
A350-A-20-15-XX-00ZZZ-398Z-A A350-A-24-41-XX-00ZZZ-561Z-A
A350-A-24-41-XX-01ZZZ-170Z-A
A350-A-29-XX-XX-04ZZZ-762Z-A A350-A-29-11-XX-02ZZZ-320Z-A

### Page 11

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 11
MAINTENANCE PROCEDURE (MP)
A350-A-29-11-XX-04ZZZ-343Z-A
A350-A-29-13-XX-00ZZZ-320Z-A
A350-A-29-13-XX-04ZZZ-343Z-A
A350-A-29-33-56-01ZZZ-520Z-A
A350-A-29-33-56-08ZZZ-720Z-A
A350-A-29-33-56-A3ZZZ-520Z-A
A350-A-29-33-56-A3ZZZ-720Z-A
A350-A-42-11-XX-00ZZZ-343Z-A
A350-A-42-11-XX-00ZZZ-752Z-A
A350-A-42-11-XX-01ZZZ-343Z-A
A350-A-46-12-01-05ZZZ-752Z-A
A350-A-50-13-61-00ZZZ-520Z-A
A350-A-50-13-61-00ZZZ-720Z-A
SYSTEM DESCRIPTION (SD)
A350-A-06-3X-XX-01ZZZ-04CZ-A A350-A-06-4X-XX-01ZZZ-04CZ-A
TECHNICAL FOLLOW UP (TFU)
29.00.00.088 29.10.00.057
VENDOR SERVICE BULLETIN (VSB)
PARKER HANNIFIN CORPORATION (93835) VSB 945193-29-525
PARKER HANNIFIN CORPORATION (93835) VSB 945193-29-540
STANDARDS MANUAL (SM)
K. PUBLICATION AFFECTED
AIRCRAFT FAULT ISOLATION (AFI)
AIRWORTHINESS LIMITATION SECTION (ALS)
AIRCRAFT SCHEMATIC DIAGRAM (ASD)
AIRCRAFT WIRING DIAGRAM (AWD)
AIRCRAFT WIRING LIST (AWL)
FLIGHT MANUAL (FM)
MAINTENANCE ILLUSTRATED PART DATA (MIPD)
MASTER MINIMUM EQUIPMENT LIST (MMEL)
MAINTENANCE PROCEDURE (MP)
MAINTENANCE REVIEW BOARD REPORT (MRBR)
SYSTEM DESCRIPTION (SD)
This Service Bulletin has an impact on flight operations documentation. Refer to ISI
00.00.00135 paragraph "Flight Operations Products" for further information on the update
of affected Flight Operations Products.
T echnical queries should be addressed through T echRequest on AirbusWorld using "T echnical
Data/Support to report Service Bulletins" form.
L. INDUSTRY SUPPORT INFORMATION
AIRBUS will share the costs of accomplishment of this Service Bulletin by providing the kits
at no charge for orders placed before Dec 31/21 .

### Page 12

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 12
AIRBUS will credit the man-hours indicated in this Service Bulletin at the agreed in-house
warranty labor rate for claims received no later than 90 days after completion of the last
affected aircraft of your fleet, for the accomplishment of this Service Bulletin before Dec 31/
21.
This Service Bulletin is the subject of an AIRBUS monitored retrofit campaign.
For the organization of this retrofit, you are kindly requested to contact AIRBUS retrofit
management department: monitored.retrofit@airbus.com.
Modification of removed equipment should be negotiated directly with the Vendor as per
instructions given in Ref. PARKER HANNIFIN CORPORATION (93835) VSB 945193-29-525 and
Ref. PARKER HANNIFIN CORPORATION (93835) VSB 945193-29-540.
Refer to Ref. PARKER HANNIFIN CORPORATION (93835) VSB 945193-29-525 and Ref. PARKER
HANNIFIN CORPORATION (93835) VSB 945193-29-540 for the industry support terms of the
Vendor Service Bulletin parts and labor.

### Page 13

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 13
2. MATERIAL INFORMATION
A. MATERIAL APPLICABILITY
Material for task set A350-A-29-XX-P029-01000-93AA-A Adapt the CD Manifolds
with PT1000 Sensors
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
FLS kit 29P029N01R00 1
Components See SB
Equipment See SB
Referenced parts See SB
Re-identified parts See SB
Interchangeable parts See SB
Spare parts See SB
B. TOOLING
Referenced tools for task set A350-A-29-XX-P029-01000-93AA-A Adapt the CD
Manifolds with PT1000 Sensors
T o accomplish this Service Bulletin it is necessary to use the tools listed in the subsequent
referenced tasks:
Ref. MP A350-A-29-33-56-08ZZZ-720Z-A
Ref. MP A350-A-29-33-56-A3ZZZ-720Z-A
C. CONSUMABLES
Consumables for task set A350-A-29-XX-P029-01000-93AA-A Adapt the CD
Manifolds with PT1000 Sensors
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
14QFB1 Wire - Locking Dia: 0.8 mmCRES Nickel Alloy
D. LIST OF NEW PARTS
FLS kit 29P029N01R00
Cost 600.00 USD
Availability 090 d (calendar days from receipt of order)
NOTE(S)
The sales terms (costs and availability) are estimated in relation to economic
conditions. The latest valid price and lead time for ordering purposes shall be
obtained through the AIRBUS Spares portal or through a request for quotation to
fls.delivery@airbus.com.
The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning
schedule with your order so that we can try to comply with your requirements.
Procurement address FAPE3
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE

### Page 14

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 14
E-mail: fls.delivery@airbus.com
Internet: http://spares.airbus.com
NOTE(S)
All software Part Numbers required for accomplishment of this Service Bulletin will be
delivered through Electronic Delivery Service (EDS) and will have to be downloaded
from airnavX MyLibrary application of the AirbusWorld portal.
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS. Quote the number of this Service Bulletin. The address is
given above.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
ABF20A6FYALB40F 1 SOFTWARE
ABF2FA6FYAL5208 1 SOFTWARE
ABF4FA6T3ALRF12 1 SOFTWARE
PBA546217000005 1 SOFTWARE
Components for task set A350-A-29-XX-P029-01000-93AA-A Adapt the CD
Manifolds with PT1000 Sensors
Procurement address D4296
AIRBUS Material, Logistics and Suppliers Standard
Parts
Customer Order Fulfilment
Phone: +49 (0) 40 50 76 40 02
E-mail: Please contact your Single Point Of Contact
(SPOC)
Internet: http://spares.airbus.com or via SPEC2000
NOTE(S)
For standard hardware the purchase order must be addressed to AIRBUS at the
address given above. Quote the number of this Service Bulletin, the MSN and, if
applicable the Retrofit Information Letter (RIL) reference.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
1 NSA935401-04B(D4296) 24 TIE (1) (2)
E0126-02B (D4296) 1000 (mm) TUBING (1) (2)
NSA936604CA0931
(D4296) 16 CAP
NOTE(S)
Refer to the AIRBUS Ref. SM if you find part numbers of hardware components which
you cannot identify. The SM will give you the correct part number to part number
relationship.
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Operator supplied standard hardware parts, required to accomplish this Service
Bulletin, are to be supplied from the operator's stock.
Equipment for task set A350-A-29-XX-P029-01000-93AA-A Adapt the CD Manifolds
with PT1000 Sensors
Procurement address 93835
PARKER HANNIFIN CORPORATION
Customer Response Center
14300 Alton Parkway
92618 Irvine - California

### Page 15

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 15
USA
Phone: +1 (949) 809–8200
Fax: +1 (949) 809–8290
E-mail: CRC@parker.com
NOTE(S)
Vendor parts are to be procured from the address given above.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
945193-4 (93835) 4 MANIFOLD (1)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
Referenced parts for task set A350-A-29-XX-P029-01000-93AA-A Adapt the CD
Manifolds with PT1000 Sensors
T o accomplish this Service Bulletin it is necessary to use the consumable materials listed in
the subsequent referenced tasks:
Ref. MP A350-A-29-33-56-08ZZZ-720Z-A
Ref. MP A350-A-29-33-56-A3ZZZ-720Z-A
Ref. MP A350-A-50-13-61-00ZZZ-720Z-A
E. LIST OF EXISTING PARTS
Re-identified parts for task set A350-A-29-XX-P029-01000-93AA-A Adapt the CD
Manifolds with PT1000 Sensors
ITEM NEW PART No. KEYWORD ITEM OLD PART No. SEE NOTES
945193-4 MANIFOLD 945193-3 (1)
NOTE(S)
(1): Parts are re-identified in accordance with Ref. PARKER HANNIFIN CORPORATION
(93835) VSB 945193-29-540.
Interchangeable parts for task set A350-A-29-XX-P029-01000-93AA-A Adapt the
CD Manifolds with PT1000 Sensors
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
MANIFOLD-
FILTER,EDP CD 945193-3 945193-4 03 (1) (2)
SOFTWARE-CPIOM
H3 MSL FILE ABF20A6FYAL5207 ABF2FA6FYAL5208 03 (1) (2)
SOFTWARE-HYD MSL
FILE ABF22A6FYALB40D ABF20A6FYALB40F 03 (1) (2)
SOFTWARE-CPIOM
H3 RBCONF ABF4CA6T3ALRF11 ABF4FA6T3ALRF12 03 (1) (2)
SOFTWARE-HMCA PBA526217000003 PBA546217000005 03 (1) (2)
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
Only the mixability configuration(s) and condition(s) stated in this Service Bulletin are
approved.

### Page 16

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 16
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
(1): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
(2): Mixability is not authorized.
Spare parts for task set A350-A-29-XX-P029-01000-93AA-A Adapt the CD
Manifolds with PT1000 Sensors
DESCRIPTION OLD PART No. SEE NOTES
MANIFOLD-FILTER,EDP CD 945193-3 (1)
NOTE(S)
(1): The parts listed here must not be installed anymore on aircraft which have
accomplished this Service Bulletin or which have the equivalent production
modification embodied.

### Page 17

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 17
3. ACCOMPLISHMENT INSTRUCTIONS
Task set A350-A-29-XX-P029-01000-93AA-A (A350-A-29-XX-P029-01ZZZ-93AZ-A)
Adapt the CD Manifolds with PT1000 Sensors
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
WARNING: USE GOGGLES AND GLOVES WHEN YOU REMOVE OR INSTALL LOCKWIRE.
EACH TIME YOU CUT LOCKWIRE DURING THE TASK, REMOVE AND DISCARD
IT. LOOSE LOCKWIRE CAN CUT YOU OR MAKE YOU BLIND.
CAUTION: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL
WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND MECHANICALLY
SERVICEABLE). WHEN YOU DO MAINTENANCE WORK, REPAIRS OR
MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND
THE WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND
DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO Ref. ESP A350-A-20-55-XX-01ZZZ-
042Z-A.
REFER TO Ref. MP A350-A-20-15-XX-00ZZZ-398Z-A FOR ELECTROSTATIC
DISCHARGE PRECAUTIONS.
DO NOT WORK ON TWO HYDRAULIC SYSTEMS DURING THE SAME
MAINTENANCE INPUT WITH THE SAME MAINTENANCE PERSONNEL. THIS IS
TO MAKE SURE THAT A POSSIBLE MAINTENANCE ERROR ON ONE SYSTEM
IS NOT DONE AGAIN ON A DIFFERENT SYSTEM. A MAINTENANCE ERROR ON
MORE THAN ONE HYDRAULIC SYSTEM CAN CAUSE FAILURE ON MULTIPLE
SYSTEMS. IF MAINTENANCE IS NECESSARY ON MORE THAN ONE SYSTEM
AT THE SAME TIME AND INVOLVES LINES/COMPONENTS DISCONNECTION,
DIFFERENT MAINTENANCE PERSONNEL MUST BE USED FOR EACH SYSTEM.
NOTE: The accomplishment instructions of this Service Bulletin include procedures given in
other documents or in other sections of the Service Bulletin. When the words “refer to”
are used and the operator has a procedure accepted by the local authority he belongs to,
the accepted alternative procedure can be used. When the words “in accordance with”
are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service Bulletin.
Operators can therefore, as deemed necessary, omit or add access and/or close-up steps
to add flexibility to their maintenance operations as long as the technical intent of the
Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms. Refer
to paragraph 1.J., References, for the definition of acronyms.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance necessary
to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, contact AIRBUS for further instructions and
approval.
NOTE: Discarded parts must be managed at the operator's discretion.

### Page 18

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 18
A. TASK SET ASSOCIATED INFORMATION
Task Manpower
TOTAL MAN-HOURS 45.00 h
ELAPSED TIME (HOURS) 21.50 h
Additional man-hours related to Vendor SB; refer to:
PARKER HANNIFIN CORPORATION (93835) VSB 945193-29-525
PARKER HANNIFIN CORPORATION (93835) VSB 945193-29-540
B. PREPARATION
(1) Task A350-A-29-XX-P029-01001-540A-A (A350-A-29-XX-P029-01ZZZ-540Z-A)
Job Set-Up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Airframe
Referenced Information
Manuals/Drawings References/Sheets
INTRO A350-A-00-61-04-11ZZZ-018Z-D
MP A350-A-24-41-XX-00ZZZ-561Z-AA350-A-24-41-XX-01ZZZ-170Z-A
Procedure
NOTE: For the basic Aircraft configuration, refer to Ref. INTRO A350-A-00-61-04-
11ZZZ-018Z-D “Introduction” in Manual Front Matter section.
(a) Make sure that the aircraft is electrically grounded, refer to Ref. MP A350-A-24-
41-XX-01ZZZ-170Z-A.
(b) De-energize the aircraft electrical circuits, refer to Ref. MP A350-A-24-41-XX-
00ZZZ-561Z-A.
(2) Task A350-A-29-XX-P029-02001-540A-A (A350-A-29-XX-P029-02ZZZ-540Z-A)
Get Access for the LH FLE
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
521 Access Panel 521DB
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Airframe

### Page 19

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 19
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-29-33-56-A3ZZZ-520Z-A
Procedure
(a) Do the Job Set-Up procedure as specified in the Removal of the Engine-Pump
Case-Drain T emperature-Transducer (FIN 7JY1), refer to Ref. MP A350-A-29-33-56-
A3ZZZ-520Z-A.
(3) Task A350-A-29-XX-P029-03001-540A-A (A350-A-29-XX-P029-03ZZZ-540Z-A)
Get Access for the RH FLE
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
621 Access Panel 621DB
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Airframe
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-29-33-56-A3ZZZ-520Z-A
Procedure
(a) Do the Job Set-Up procedure as specified in the Removal of the Engine-Pump
Case-Drain T emperature-Transducer (FIN 7JY2), refer to Ref. MP A350-A-29-33-56-
A3ZZZ-520Z-A.
(4) Task A350-A-29-XX-P029-04001-540A-A (A350-A-29-XX-P029-04ZZZ-540Z-A)
Get Access for the LH FTE
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
571 Access Panel 571FB
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Airframe
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-29-33-56-A3ZZZ-520Z-A

### Page 20

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 20
Procedure
(a) Do the Job Set-Up procedure as specified in the Removal of the Engine-Pump
Case-Drain T emperature-Transducer (FIN 7JG1), refer to Ref. MP A350-A-29-33-56-
A3ZZZ-520Z-A.
(5) Task A350-A-29-XX-P029-05001-540A-A (A350-A-29-XX-P029-05ZZZ-540Z-A)
Get Access for the RH FTE
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
671 Access Panel 671FB
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Airframe
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-29-33-56-A3ZZZ-520Z-A
Procedure
(a) Do the Job Set-Up procedure as specified in the Removal of the Engine-Pump
Case-Drain T emperature-Transducer (FIN 7JG2), refer to Ref. MP A350-A-29-33-56-
A3ZZZ-520Z-A.
(6) Task A350-A-29-XX-P029-06001-540A-A (A350-A-29-XX-P029-06ZZZ-540Z-A)
Get Access to the Avionics Compartment
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
Access Panel 131BAW, Panel 132AAW130
Work location From Frame 18 to Frame 20
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Airframe
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-50-13-61-00ZZZ-520Z-A
Procedure

### Page 21

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 21
(a) Do the Job Set-Up procedure as specified in the Removal of the Ceiling Panels,
the Sidewall and the Inclined Panels, the Partition Wall Panels and the Actuator
Panel in the Forward Cargo Compartment, refer to Ref. MP A350-A-50-13-61-
00ZZZ-520Z-A.
(b) Remove the Partition Wall Panels Panel 131BAW and Panel 132AAW, refer to Ref.
MP A350-A-50-13-61-00ZZZ-520Z-A.
C. PROCEDURE
(1) Task A350-A-29-XX-P029-01001-920A-A (A350-A-29-XX-P029-01ZZZ-920Z-A)
Option 1 - Modify the Yellow CD Manifold (FIN 23JX) on Aircraft
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
521 Access Panel 521DB
Manpower/Resources/Skills
Man-hours
Minimum Number of person
Elapsed Time
Skills Electrical
Referenced Information
Manuals/Drawings References/Sheets
VSB PARKER HANNIFIN CORPORATION (93835)VSB 945193-29-525
Procedure
(a) Modify the Case Drain Filter Manifold (FIN 23JX) in accordance with Ref. PARKER
HANNIFIN CORPORATION (93835) VSB 945193-29-525.
(b) After the modification:
FIN 23JX
1 MANIFOLD-FILTER,EDP
CD
945193-3    
(c) Add 945193–29–525 ink marking in accordance with Ref. PARKER HANNIFIN
CORPORATION (93835) VSB 945193-29-525.
(2) Task A350-A-29-XX-P029-10001-520A-A (A350-A-29-XX-P029-10ZZZ-520Z-A)
Option 2 - Remove and Retain the Yellow CD Manifold (FIN 23JX)
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
521 Access Panel 521DB
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h

### Page 22

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 22
Skills Electrical
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-29-33-56-01ZZZ-520Z-A
Procedure
(a) Remove the Yellow Case Drain Filter Manifold (FIN 23JX), refer to Ref. MP A350-A-
29-33-56-01ZZZ-520Z-A.
FIN 23JX
1 MANIFOLD-FILTER,EDP
CD
945193-3   Retain
NOTE: Retained for modification.
(3) Task A350-A-29-XX-P029-06001-920A-C (A350-A-29-XX-P029-06ZZZ-920Z-C)
Option 2 - Modify the Yellow CD Manifold (FIN 23JX)
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
521 Access Panel 521DB
Manpower/Resources/Skills
Man-hours
Minimum Number of person
Elapsed Time
Skills Electrical
Material necessary to do the job
Re-identified Part Set
ITEM NEW PART No. KEYWORD ITEM OLD PART No. SEE NOTES
945193-4 MANIFOLD 945193-3 (1)
NOTE(S)
(1): Parts are re-identified in accordance with Ref. PARKER HANNIFIN CORPORATION
(93835) VSB 945193-29-540.
Referenced Information
Manuals/Drawings References/Sheets
VSB PARKER HANNIFIN CORPORATION (93835)VSB 945193-29-540
Procedure
(a) Modify the Case Drain Filter Manifold (FIN 23JX) in accordance with Ref. PARKER
HANNIFIN CORPORATION (93835) VSB 945193-29-540.
(b) After the modification:
FIN 23JX
1 MANIFOLD-FILTER,EDP
CD
945193-3

### Page 23

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 23
becomes
FIN 23JX
1 MANIFOLD-FILTER,EDP
CD
945193-4  
(4) Task A350-A-29-XX-P029-05001-720A-A (A350-A-29-XX-P029-05ZZZ-720Z-A)
Option 2 - Install the Modified Yellow CD Manifold (FIN 23JX)
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Electrical
Material necessary to do the job
Re-identified Part Set
ITEM NEW PART No. KEYWORD ITEM OLD PART No. SEE NOTES
945193-4 MANIFOLD 945193-3 (1)
NOTE(S)
(1): Parts are re-identified in accordance with Ref. PARKER HANNIFIN CORPORATION
(93835) VSB 945193-29-540.
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-29-33-56-08ZZZ-720Z-A
Procedure
(a) Install the Yellow Case Drain Filter Manifold (FIN 23JX), refer to Ref. MP A350-A-
29-33-56-08ZZZ-720Z-A.
FIN 23JX
1 MANIFOLD-FILTER,EDP
CD
945193-4  
NOTE: Do not connect the electrical Connector until the new wiring installation
is complete.
(5) Task A350-A-29-XX-P029-10001-920A-A (A350-A-29-XX-P029-10ZZZ-920Z-A)
Option 3 - Replace the Yellow CD Manifold (FIN 23JX)
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
521 Access Panel 521DB
Manpower/Resources/Skills
Man-hours 2.00 h
Minimum Number of person 1
Elapsed Time 2.00 h

### Page 24

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 24
Skills Airframe
Material necessary to do the job
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
945193-4 1 MANIFOLD (1)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-29-33-56-01ZZZ-520Z-AA350-A-29-33-56-08ZZZ-720Z-A
Procedure
(a) Remove the Yellow Case Drain Filter Manifold (FIN 23JX), refer to Ref. MP A350-A-
29-33-56-01ZZZ-520Z-A.
FIN 23JX
1 MANIFOLD-FILTER,EDP
CD
945193-3   Discard
(b) Install the Yellow Case Drain Filter Manifold (FIN 23JX), refer to Ref. MP A350-A-
29-33-56-08ZZZ-720Z-A.
FIN 23JX
1 MANIFOLD-FILTER,EDP
CD
945193-4  
NOTE: Do not connect the electrical Connector until the new wiring installation
is complete.
(6) Task A350-A-29-XX-P029-01001-900A-A (A350-A-29-XX-P029-01ZZZ-900Z-A)
Modify the Wing Wiring to the Temp XDCR (FIN 7JY1)
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
521 Access Panel 521DB
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Electrical
Material necessary to do the job
Consumables
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
14QFB1 Wire - Locking Dia: 0.8 mmCRES Nickel Alloy

### Page 25

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 25
Components
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
1 NSA935401-04B 6 TIE (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Operator supplied standard hardware parts, required to accomplish this Service
Bulletin, are to be supplied from the operator's stock.
Referenced Information
Manuals/Drawings References/Sheets
ESP
A350-A-20-32-23-01ZZZ-042Z-A
A350-A-20-33-XX-01ZZZ-042Z-A
A350-A-20-4X-XX-01ZZZ-042Z-A
A350-A-20-52-10-01ZZZ-042Z-A
A350-A-20-52-21-00ZZZ-36AZ-A
A350-A-20-54-50-01ZZZ-042Z-A
A350-A-20-54-55-01ZZZ-042Z-A
SD A350-A-06-3X-XX-01ZZZ-04CZ-AA350-A-06-4X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard practices given in this procedure:
1 For the identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-
04CZ-A.
2 For the identification of access panels, refer to Ref. SD A350-A-06-4X-XX-
01ZZZ-04CZ-A.
3 T ag all the parts you must remove and retain to make the subsequent
installation easier.
4 Do a check of the electrical connectors before you connect them, refer to
Ref. ESP A350-A-20-52-10-01ZZZ-042Z-A.
5 For the protection of the connectors, contacts and terminals, refer to Ref.
ESP A350-A-20-54-50-01ZZZ-042Z-A.
6 For the general installation of electrical wire harnesses, refer to Ref. ESP
A350-A-20-33-XX-01ZZZ-042Z-A.
7 For the removal and installation of electrical items and connecting parts,
refer to Ref. ESP A350-A-20-4X-XX-01ZZZ-042Z-A.
8 For the protection and stowage of the terminals, contacts and cables, refer
to Ref. ESP A350-A-20-54-55-01ZZZ-042Z-A.
(b) Locate bundle 4001VB/1M and 4003VB/1S on the LH FLE, refer to Ref. Fig. 7JY1
Wing Wiring Modification.
(c) Remove stowed connector FIN 4117VCA, item (2), from the dummy receptacle,
refer to Ref. Fig. 7JY1 Wing Wiring Modification, SHEET 01.
FIN 4117VCA
1 CONNECTOR   Item (2) Retain

### Page 26

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 26
(d) Connect previously stowed connector FIN 4117VCA, item (2), to the new
T emperature Transducer FIN 7JY1, refer to Ref. Fig. 7JY1 Wing Wiring Modification,
SHEET 02, Ref. Fig. 7JY1 Wing Wiring Diagram.
FIN 4117VCA
1 CONNECTOR   Item (2) Retained
(e) Install the removed connector FIN 7JY1A, item (17), onto the dummy receptacle,
refer to Ref. Fig. 7JY1 Wing Wiring Modification, SHEET 02, Ref. Fig. 7JY1 Wing
Wiring Diagram.
FIN 7JY1A
1 CONNECTOR   Item (17) Retained
(f) Re-Identify the switched connectors.
1 Remove the FIN labels from bundles 4001VB/1M and 4003VB/1S, refer to
Ref. Fig. 7JY1 Wing Wiring Modification, SHEET 01.
a Remove the FIN label, item (4), from the bundle 4001VB/1M, refer to
Ref. Fig. 7JY1 Wing Wiring Modification, SHEET 01:
1 FIN LABEL 4117VCA   Item (4) Retain
3 TIE-CABLE   Item (1) Discard
b Remove the FIN label, item (3), from the bundle 4003VB/1S, refer to
Ref. Fig. 7JY1 Wing Wiring Modification, SHEET 01:
1 FIN LABEL 7JY1   Item (3) Retain
3 TIE-CABLE   Item (1) Discard
2 Install the FIN labels onto bundles 4001VB/1M and 4003VB/1S, refer to Ref.
Fig. 7JY1 Wing Wiring Modification, SHEET 02.
a Install the FIN label, item (4), from 4001VB/1M onto 4003VB/1S, refer
to Ref. Fig. 7JY1 Wing Wiring Modification, SHEET 02, and Ref. ESP
A350-A-20-32-23-01ZZZ-042Z-A:
1 FIN LABEL 4117VCA   Item (4) Retained
using:
3 TIE-CABLE NSA935401-04B Item 1
b Install the FIN label, item (3), from 4003VB/1S onto 4001VB/1M, refer
to Ref. Fig. 7JY1 Wing Wiring Modification, SHEET 02, and Ref. ESP
A350-A-20-32-23-01ZZZ-042Z-A:
1 FIN LABEL 7JY1   Item (3) Retained
using:
3 TIE-CABLE NSA935401-04B Item 1
(g) Secure Backshells in place, refer to Ref. Fig. 7JY1 Wing Wiring Modification,
SHEET 02, using:
  Wire - Locking Dia: 0.8
mm CRES Nickel Alloy
14QFB1  
(h) Do a continuity test of the new and/or modified electrical wires, refer to Ref. ESP
A350-A-20-52-21-00ZZZ-36AZ-A.

### Page 27

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP029-A-FAPE3-05T6W-A-002-01 SHEET 1/3
REV 00 Dec 16/20 A350-29-P0297JY1 Wing Wiring Modification
Page 27
CONF ALL
A
Z521
A
521DB
B D
ICN-A350-A-29XXP029-A-FAPE3-05T6W-A-002-01

### Page 28

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP029-A-FAPE3-05T6X-A-003-01 SHEET 2/3
REV 00 Dec 16/20 A350-29-P0297JY1 Wing Wiring Modification
Page 28
CONF ALL
FWD B
VIEW LOOKING OUTBD
NOTE:
REMOVE EXISTING LOCKWIRE01
BEFORE
4117VCA
4001VB /1M
7JY1A
(2)01
(4)
(3)(17)
HARNESS
4003VB /1S
HARNESS
7JY1
TRANSDUCER
23JX
MANIFOLD
(1) (1) (1)
LABEL
TYPICAL
C
C
ICN-A350-A-29XXP029-A-FAPE3-05T6X-A-003-01

### Page 29

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP029-A-FAPE3-05T6Y-A-003-01 SHEET 3/3
REV 00 Dec 16/20 A350-29-P0297JY1 Wing Wiring Modification
Page 29
CONF ALL
FWD
VIEW LOOKING OUTBD
NOTE:
SECURE BACKSHELL IN PLACE USING MATERIAL No 14QFB102
AFTER
7JY1A
(4)
(3)
(2)02 HARNESS
HARNESS
7JY1
TRANSDUCER
23JX
MANIFOLD
4117VCA
(17)02
4003VB /1S
4001VB /1M
1 1 1
LABEL
TYPICAL
E
E
D
ICN-A350-A-29XXP029-A-FAPE3-05T6Y-A-003-01

### Page 30

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP029-A-FAPE3-05SYB-A-001-01 SHEET 1/2
REV 00 Dec 16/20 A350-29-P0297JY1 Wing Wiring Diagram
Page 30
CONF ALL
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE DRD24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S 
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 2913
ICN-A350-A-29XXP029-A-FAPE3-05SYB-A-001-01
F.R.
F.R.
F.R.
2M
1M
RR
YY
BB
GG
R4092
DRB24 B
R4094
DRB24 B
R
4086
Y
B
G
R4093
DRB24 B
2MY
A
A
2
3
521
2441VC503
1
2
521
2441VC595
A
25
24
23
22
521
2441VC259
F.R. FOR REFERENCE
BEFORE
A
1
2
521
4113VC
EXISTING WIRE
A
A
521
4117VC
3
4
1
5
TEMP XDCR-
521
7JY1
ENG1 PUMP CD,  YELLOW
2
1
3
4

### Page 31

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP029-A-FAPE3-05SYC-A-001-01 SHEET 2/2
REV 00 Dec 16/20 A350-29-P0297JY1 Wing Wiring Diagram
Page 31
CONF ALL
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE DRD24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S 
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 2913
ICN-A350-A-29XXP029-A-FAPE3-05SYC-A-001-01
F.R.
F.R.
F.R.
R
Y
B
G
2M
1M
R4092
DRB24 B
R
4086
Y
B
G
R4094
DRB24 B
R4093
DRB24 B
R
Y
B
G
2MY
A
A
A
25
24
23
22
521
2441VC259
2
3
521
2441VC503
1
2
521
2441VC595
EXISTING WIRE
A
AFTER
1
2
521
4113VC
F.R. FOR REFERENCE
A
1
2
3
4
521
4117VC
A
TEMP XDCR-
521
7JY1
ENG1 PUMP CD,  YELLOW
3
4
1
5

### Page 32

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 32
(7) Task A350-A-29-XX-P029-02001-920A-A (A350-A-29-XX-P029-02ZZZ-920Z-A)
Option 1 - Modify the Yellow CD Manifold (FIN 24JX) on Aircraft
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
621 Access Panel 621DB
Manpower/Resources/Skills
Man-hours
Minimum Number of person
Elapsed Time
Skills Electrical
Referenced Information
Manuals/Drawings References/Sheets
VSB PARKER HANNIFIN CORPORATION (93835)VSB 945193-29-525
Procedure
(a) Modify the Case Drain Filter Manifold (FIN 24JX) in accordance with Ref. PARKER
HANNIFIN CORPORATION (93835) VSB 945193-29-525.
(b) After the modification:
FIN 24JX
1 MANIFOLD-FILTER,EDP
CD
945193-3    
(c) Add 945193–29–525 ink marking in accordance with Ref. PARKER HANNIFIN
CORPORATION (93835) VSB 945193-29-525.
(8) Task A350-A-29-XX-P029-03001-520A-A (A350-A-29-XX-P029-03ZZZ-520Z-A)
Option 2 - Remove and Retain the Yellow CD Manifold (FIN 24JX)
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
621 Access Panel 621DB
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Electrical
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-29-33-56-01ZZZ-520Z-A
Procedure

### Page 33

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 33
(a) Remove the Yellow Case Drain Filter Manifold (FIN 24JX), refer to Ref. MP A350-A-
29-33-56-01ZZZ-520Z-A.
FIN 24JX
1 MANIFOLD-FILTER,EDP
CD
945193-3   Retain
NOTE: Retained for modification.
(9) Task A350-A-29-XX-P029-07001-920A-C (A350-A-29-XX-P029-07ZZZ-920Z-C)
Option 2 - Modify the Yellow CD Manifold (FIN 24JX)
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
621 Access Panel 621DB
Manpower/Resources/Skills
Man-hours
Minimum Number of person
Elapsed Time
Skills Electrical
Material necessary to do the job
Re-identified Part Set
ITEM NEW PART No. KEYWORD ITEM OLD PART No. SEE NOTES
945193-4 MANIFOLD 945193-3 (1)
NOTE(S)
(1): Parts are re-identified in accordance with Ref. PARKER HANNIFIN CORPORATION
(93835) VSB 945193-29-540.
Referenced Information
Manuals/Drawings References/Sheets
VSB PARKER HANNIFIN CORPORATION (93835)VSB 945193-29-540
Procedure
(a) Modify the Case Drain Filter Manifold (FIN 24JX) in accordance with Ref. PARKER
HANNIFIN CORPORATION (93835) VSB 945193-29-540.
(b) After the modification:
FIN 24JX
1 MANIFOLD-FILTER,EDP
CD
945193-3    
becomes
FIN 24JX
1 MANIFOLD-FILTER,EDP
CD
945193-4  
(10) Task A350-A-29-XX-P029-06001-720A-A (A350-A-29-XX-P029-06ZZZ-720Z-A)
Option 2 - Install the Modified Yellow CD Manifold (FIN 24JX)

### Page 34

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 34
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Electrical
Material necessary to do the job
Re-identified Part Set
ITEM NEW PART No. KEYWORD ITEM OLD PART No. SEE NOTES
945193-4 MANIFOLD 945193-3 (1)
NOTE(S)
(1): Parts are re-identified in accordance with Ref. PARKER HANNIFIN CORPORATION
(93835) VSB 945193-29-540.
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-29-33-56-08ZZZ-720Z-A
Procedure
(a) Install the Yellow Case Drain Filter Manifold (FIN 24JX), refer to Ref. MP A350-A-
29-33-56-08ZZZ-720Z-A.
FIN 24JX
1 MANIFOLD-FILTER,EDP
CD
945193-4  
NOTE: Do not connect the electrical Connector until the new wiring installation
is complete.
(11) Task A350-A-29-XX-P029-11001-920A-A (A350-A-29-XX-P029-11ZZZ-920Z-A)
Option 3 - Replace the Yellow CD Manifold (FIN 24JX)
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
621 Access Panel 621DB
Manpower/Resources/Skills
Man-hours 2.00 h
Minimum Number of person 1
Elapsed Time 2.00 h
Skills Airframe
Material necessary to do the job
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
945193-4 1 MANIFOLD (1)
NOTE(S)

### Page 35

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 35
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-29-33-56-01ZZZ-520Z-AA350-A-29-33-56-08ZZZ-720Z-A
Procedure
(a) Remove the Yellow Case Drain Filter Manifold (FIN 24JX), refer to Ref. MP A350-A-
29-33-56-01ZZZ-520Z-A.
FIN 24JX
1 MANIFOLD-FILTER,EDP
CD
945193-3   Discard
(b) Install the Yellow Case Drain Filter Manifold (FIN 24JX), refer to Ref. MP A350-A-
29-33-56-08ZZZ-720Z-A.
FIN 24JX
1 MANIFOLD-FILTER,EDP
CD
945193-4  
NOTE: Do not connect the electrical Connector until the new wiring installation
is complete.
(12) Task A350-A-29-XX-P029-02001-900A-A (A350-A-29-XX-P029-02ZZZ-900Z-A)
Modify the Wiring to the Temp XDCR (FIN 7JY2)
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
621 Access Panel 621DB
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Electrical
Material necessary to do the job
Consumables
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
14QFB1 Wire - Locking Dia: 0.8 mmCRES Nickel Alloy
Components
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
1 NSA935401-04B 6 TIE (1) (2)

### Page 36

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 36
Components
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Operator supplied standard hardware parts, required to accomplish this Service
Bulletin, are to be supplied from the operator's stock.
Referenced Information
Manuals/Drawings References/Sheets
ESP
A350-A-20-32-23-01ZZZ-042Z-A
A350-A-20-33-XX-01ZZZ-042Z-A
A350-A-20-4X-XX-01ZZZ-042Z-A
A350-A-20-52-10-01ZZZ-042Z-A
A350-A-20-52-21-00ZZZ-36AZ-A
A350-A-20-54-50-01ZZZ-042Z-A
A350-A-20-54-55-01ZZZ-042Z-A
SD A350-A-06-3X-XX-01ZZZ-04CZ-AA350-A-06-4X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard practices given in this procedure:
1 For the identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-
04CZ-A.
2 For the identification of access panels, refer to Ref. SD A350-A-06-4X-XX-
01ZZZ-04CZ-A.
3 T ag all the parts you must remove and retain to make the subsequent
installation easier.
4 Do a check of the electrical connectors before you connect them, refer to
Ref. ESP A350-A-20-52-10-01ZZZ-042Z-A.
5 For the protection of the connectors, contacts and terminals, refer to Ref.
ESP A350-A-20-54-50-01ZZZ-042Z-A.
6 For the general installation of electrical wire harnesses, refer to Ref. ESP
A350-A-20-33-XX-01ZZZ-042Z-A.
7 For the removal and installation of electrical items and connecting parts,
refer to Ref. ESP A350-A-20-4X-XX-01ZZZ-042Z-A.
8 For the protection and stowage of the terminals, contacts and cables, refer
to Ref. ESP A350-A-20-54-55-01ZZZ-042Z-A.
(b) Locate bundle 4004VB-2M and 4006VB-2S on the RH FLE, refer to Ref. Fig. 7JY2
Wing Wiring Modification.
(c) Remove stowed connector FIN 4116VCA, item (6) from the dummy receptacle,
refer to Ref. Fig. 7JY2 Wing Wiring Modification, SHEET 01.
FIN 4116VCA
1 CONNECTOR   Item (6) Retain

### Page 37

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 37
(d) Connect stowed connector FIN 4116VCA, item (6), onto the T emperature
Transducer FIN 7JY2, refer to Ref. Fig. 7JY2 Wing Wiring Modification, SHEET 02,
and Ref. Fig. 7JY2 Wing Wiring Diagram.
FIN 4116VCA
1 CONNECTOR   Item (6) Retained
(e) Connect the removed connector FIN 7JY2A, item (5), onto the dummy receptacle,
refer to Ref. Fig. 7JY2 Wing Wiring Modification, SHEET 02, and Ref. Fig. 7JY2 Wing
Wiring Diagram.
FIN 7JY2A
1 CONNECTOR   Item (5) Retained
(f) Re-Identify the switched connectors.
1 Remove the FIN labels from bundles 4004VB/2M and 4006VB/2S.
a Remove the FIN label, item (7), from the bundle 4004VB/2M, refer to
Ref. Fig. 7JY2 Wing Wiring Modification, SHEET 01:
1 FIN LABEL 4116VCA   Item (7) Retain
3 TIE-CABLE   Item (1) Discard
b Remove the FIN label, item (8), from the bundle 4006VB/2S, refer to
Ref. Fig. 7JY2 Wing Wiring Modification, SHEET 01:
1 FIN LABEL 7JY2   Item (8) Retain
3 TIE-CABLE   Item (1) Discard
2 Install the FIN labels onto bundles 4004VB/2M and 4006VB/2S.
a Install the FIN label, item (7), from 4004VB/2M onto 4006VB/2S, refer
to Ref. Fig. 7JY2 Wing Wiring Modification, SHEET 02, and Ref. ESP
A350-A-20-32-23-01ZZZ-042Z-A:
1 FIN LABEL 4116VCA   Item (7) Retained
using:
3 TIE-CABLE NSA935401-04B Item 1
b Install the FIN label, item (8), from 4006VB/2S onto 4004VB/2M, refer
to Ref. Fig. 7JY2 Wing Wiring Modification, SHEET 02, and Ref. ESP
A350-A-20-32-23-01ZZZ-042Z-A:
1 FIN LABEL 7JY2   Item (8) Retained
using:
3 TIE-CABLE NSA935401-04B Item 1
(g) Secure Backshells in place, refer to Ref. Fig. 7JY2 Wing Wiring Modification,
SHEET 02, using:
  Wire - Locking Dia: 0.8
mm CRES Nickel Alloy
14QFB1  
(h) Do a continuity test of the new and/or modified electrical wires, refer to Ref. ESP
A350-A-20-52-21-00ZZZ-36AZ-A.

### Page 38

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP029-A-FAPE3-05T6T-A-002-01 SHEET 1/3
REV 00 Dec 16/20 A350-29-P0297JY2 Wing Wiring Modification
Page 38
CONF ALL
A
Z621
621DB
A
B D
ICN-A350-A-29XXP029-A-FAPE3-05T6T-A-002-01

### Page 39

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP029-A-FAPE3-05T6U-A-002-01 SHEET 2/3
REV 00 Dec 16/20 A350-29-P0297JY2 Wing Wiring Modification
Page 39
CONF ALL
FWD B
VIEW LOOKING OUTBD
NOTE:
REMOVE EXISTING LOCKWIRE01
BEFORE
(6)
(7)
(8)
HARNESS
MANIFOLD
01
4116VCA
4004VB /2M
TRANSDUCER
7JY2
24JX
HARNESS
(5)
7JY2A
4006VB /2S
C
(1) (1) (1)
LABEL
TYPICAL
C
ICN-A350-A-29XXP029-A-FAPE3-05T6U-A-002-01

### Page 40

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP029-A-FAPE3-05T6V-A-002-01 SHEET 3/3
REV 00 Dec 16/20 A350-29-P0297JY2 Wing Wiring Modification
Page 40
CONF ALL
FWD
VIEW LOOKING OUTBD
NOTE:
SECURE BACKSHELL IN PLACE USING MATERIAL No 14QFB102
AFTER
(5)
(7)
(8)
HARNESS
MANIFOLD
02
4116VCA
TRANSDUCER
7JY2
24JX
HARNESS
4006VB /2S
4004VB /2M
(6)
7JY2A
02
D
1 1 1
LABEL
TYPICAL
E
E
ICN-A350-A-29XXP029-A-FAPE3-05T6V-A-002-01

### Page 41

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP029-A-FAPE3-05SYL-A-001-01 SHEET 1/2
REV 00 Dec 16/20 A350-29-P0297JY2 Wing Wiring Diagram
Page 41
CONF ALL
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE DRD24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S 
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 2913
ICN-A350-A-29XXP029-A-FAPE3-05SYL-A-001-01
F.R.
F.R.
F.R.
RR
YY
BB
GG
1M
R4096
DRB24 B
R
4089
Y
B
G
R4095
DRB24 B
R4097
DRB24 B
1MY
2M
A
A
A
25
24
23
22
621
2441VC260
40
41
621
2441VC600
28
29
621
2441VC504
EXISTING WIRE
A
BEFORE
1
2
621
4112VC
F.R. FOR REFERENCE
A
TEMP XDCR -
621
7JY2
ENG2 PUMP CD, YELLOW
1
3
2
4
A
3
4
1
5
621
4116VC

### Page 42

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP029-A-FAPE3-05SYM-A-001-01 SHEET 2/2
REV 00 Dec 16/20 A350-29-P0297JY2 Wing Wiring Diagram
Page 42
CONF ALL
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE DRD24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 2S 
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 2913
ICN-A350-A-29XXP029-A-FAPE3-05SYM-A-001-01
F.R.
F.R.
F.R.
R
Y
B
G
1M
R4096
DRB24 B
R
4089
Y
B
G
R4095
DRB24 B
R4097
DRB24 B
R
Y
B
G
1MY
2M
A
A
A
25
24
23
22
621
2441VC260
40
41
621
2441VC600
28
29
621
2441VC504
EXISTING WIRE
A
AFTER
1
2
621
4112VC
F.R. FOR REFERENCE
A
1
2
3
4
621
4116VC
A
TEMP XDCR -
621
7JY2
ENG2 PUMP CD, YELLOW
3
4
1
5

### Page 43

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 43
(13) Task A350-A-29-XX-P029-03001-920A-A (A350-A-29-XX-P029-03ZZZ-920Z-A)
Option 1 - Modify the Green CD Manifold (FIN 21JX) on Aircraft
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
571 Access Panel 571FB
Manpower/Resources/Skills
Man-hours
Minimum Number of person
Elapsed Time
Skills Electrical
Referenced Information
Manuals/Drawings References/Sheets
VSB PARKER HANNIFIN CORPORATION (93835)VSB 945193-29-525
Procedure
(a) Modify the Case Drain Filter Manifold (FIN 21JX) in accordance with Ref. PARKER
HANNIFIN CORPORATION (93835) VSB 945193-29-525.
(b) After the modification:
FIN 21JX
1 MANIFOLD-FILTER,EDP
CD
945193-3    
(c) Add 945193–29–525 ink marking in accordance with Ref. PARKER HANNIFIN
CORPORATION (93835) VSB 945193-29-525.
(14) Task A350-A-29-XX-P029-05001-520A-A (A350-A-29-XX-P029-05ZZZ-520Z-A)
Option 2 - Remove and Retain the Green CD Manifold (FIN 21JX)
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
571 Access Panel 571FB
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Electrical
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-29-33-56-01ZZZ-520Z-A
Procedure

### Page 44

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 44
(a) Remove the Green Case Drain Filter Manifold (FIN 21JX), refer to Ref. MP A350-A-
29-33-56-01ZZZ-520Z-A.
FIN 21JX
1 MANIFOLD-FILTER,EDP
CD
945193-3   Retain
NOTE: Retained for modification.
(15) Task A350-A-29-XX-P029-08001-920A-C (A350-A-29-XX-P029-08ZZZ-920Z-C)
Option 2 - Modify the Green CD Manifold (FIN 21JX)
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
571
Manpower/Resources/Skills
Man-hours
Minimum Number of person
Elapsed Time
Skills Electrical
Material necessary to do the job
Re-identified Part Set
ITEM NEW PART No. KEYWORD ITEM OLD PART No. SEE NOTES
945193-4 MANIFOLD 945193-3 (1)
NOTE(S)
(1): Parts are re-identified in accordance with Ref. PARKER HANNIFIN CORPORATION
(93835) VSB 945193-29-540.
Referenced Information
Manuals/Drawings References/Sheets
VSB PARKER HANNIFIN CORPORATION (93835)VSB 945193-29-540
Procedure
(a) Modify the Case Drain Filter Manifold (FIN 21JX) in accordance with Ref. PARKER
HANNIFIN CORPORATION (93835) VSB 945193-29-540.
(b) After the modification:
FIN 21JX
1 MANIFOLD-FILTER,EDP
CD
945193-3    
becomes
FIN 21JX
1 MANIFOLD-FILTER,EDP
CD
945193-4  
(16) Task A350-A-29-XX-P029-07001-720A-A (A350-A-29-XX-P029-07ZZZ-720Z-A)
Option 2 - Install the Modified Green CD Manifold (FIN 21JX)

### Page 45

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 45
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Electrical
Material necessary to do the job
Re-identified Part Set
ITEM NEW PART No. KEYWORD ITEM OLD PART No. SEE NOTES
945193-4 MANIFOLD 945193-3 (1)
NOTE(S)
(1): Parts are re-identified in accordance with Ref. PARKER HANNIFIN CORPORATION
(93835) VSB 945193-29-540.
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-29-33-56-08ZZZ-720Z-A
Procedure
(a) Install the Green Case Drain Filter Manifold (FIN 21JX), refer to Ref. MP A350-A-
29-33-56-08ZZZ-720Z-A.
FIN 21JX
1 MANIFOLD-FILTER,EDP
CD
945193-4  
NOTE: Do not connect the electrical Connector until the new wiring installation
is complete.
(17) Task A350-A-29-XX-P029-05001-920A-A (A350-A-29-XX-P029-05ZZZ-920Z-A)
Option 3 - Replace the Green CD Manifold (FIN 21JX)
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 2.00 h
Minimum Number of person 1
Elapsed Time 2.00 h
Skills Airframe
Material necessary to do the job
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
945193-4 1 MANIFOLD (1)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.

### Page 46

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 46
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-29-33-56-01ZZZ-520Z-AA350-A-29-33-56-08ZZZ-720Z-A
Procedure
(a) Remove the Green Case Drain Filter Manifold (FIN 21JX), refer to Ref. MP A350-A-
29-33-56-01ZZZ-520Z-A.
FIN 21JX
1 MANIFOLD-FILTER,EDP
CD
945193-3   Discard
(b) Install the Green Case Drain Filter Manifold (FIN 21JX), refer to Ref. MP A350-A-
29-33-56-08ZZZ-720Z-A.
FIN 21JX
1 MANIFOLD-FILTER,EDP
CD
945193-4  
NOTE: Do not connect the electrical Connector until the new wiring installation
is complete.
(18) Task A350-A-29-XX-P029-03001-900A-A (A350-A-29-XX-P029-03ZZZ-900Z-A)
Modify the Wing Wiring to the Temp XDCR (FIN 7JG1)
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
571 Access Panel 571FB
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Electrical
Material necessary to do the job
Consumables
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
14QFB1 Wire - Locking Dia: 0.8 mmCRES Nickel Alloy
Components
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
1 NSA935401-04B 6 TIE (1) (2)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Operator supplied standard hardware parts, required to accomplish this Service
Bulletin, are to be supplied from the operator's stock.

### Page 47

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 47
Referenced Information
Manuals/Drawings References/Sheets
ESP
A350-A-20-32-23-01ZZZ-042Z-A
A350-A-20-33-XX-01ZZZ-042Z-A
A350-A-20-4X-XX-01ZZZ-042Z-A
A350-A-20-52-10-01ZZZ-042Z-A
A350-A-20-52-21-00ZZZ-36AZ-A
A350-A-20-54-50-01ZZZ-042Z-A
A350-A-20-54-55-01ZZZ-042Z-A
SD A350-A-06-3X-XX-01ZZZ-04CZ-AA350-A-06-4X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard practices given in this procedure:
1 For the identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-
04CZ-A.
2 For the identification of access panels, refer to Ref. SD A350-A-06-4X-XX-
01ZZZ-04CZ-A.
3 T ag all the parts you must remove and retain to make the subsequent
installation easier.
4 Do a check of the electrical connectors before you connect them, refer to
Ref. ESP A350-A-20-52-10-01ZZZ-042Z-A.
5 For the protection of the connectors, contacts and terminals, refer to Ref.
ESP A350-A-20-54-50-01ZZZ-042Z-A.
6 For the general installation of electrical wire harnesses, refer to Ref. ESP
A350-A-20-33-XX-01ZZZ-042Z-A.
7 For the removal and installation of electrical items and connecting parts,
refer to Ref. ESP A350-A-20-4X-XX-01ZZZ-042Z-A.
8 For the protection and stowage of the terminals, contacts and cables, refer
to Ref. ESP A350-A-20-54-55-01ZZZ-042Z-A.
(b) Locate bundle 4041VB-1M and 4043VB-1S on the LH FTE, refer to Ref. Fig. 7JG1
Wing Wiring Modification.
(c) Remove stowed connector FIN 4119VCA, item (10), from the dummy receptacle,
refer to Ref. Fig. 7JG1 Wing Wiring Modification, SHEET 01.
FIN 4119VCA
1 CONNECTOR   Item (10) Retain
(d) Connect the previously stowed connector FIN 4119VCA, item (10), to
the T emperature Transducer FIN 7JG1, refer to Ref. Fig. 7JG1 Wing Wiring
Modification, SHEET 02, and Ref. Fig. 7JG1 Wing Wiring Diagram.
FIN 4119VCA
1 CONNECTOR   Item (10) Retained
(e) Install the removed connector FIN 7JG1A, item (9), onto the dummy receptacle,
refer to Ref. Fig. 7JG1 Wing Wiring Modification, SHEET 02, and Ref. Fig. 7JG1
Wing Wiring Diagram.
FIN 7JG1A
1 CONNECTOR   Item (9) Retained

### Page 48

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 48
(f) Re-Identify the switched connectors.
1 Remove the FIN labels from the bundles 4041VB/1M and 4043VB/1S.
a Remove the FIN label, item (12), from the bundle 4041VB/1M, refer to
Ref. Fig. 7JG1 Wing Wiring Modification, SHEET 01:
1 FIN LABEL 4119VCA   Item (12) Retain
3 TIE-CABLE   Item (1) Discard
b Remove the FIN label, item (11), from the bundle 4043VB/1S, refer to
Ref. Fig. 7JG1 Wing Wiring Modification, SHEET 01:
1 FIN LABEL 7JG1A   Item (11) Retain
3 TIE-CABLE   Item (1) Discard
2 Install the FIN labels onto the bundles 4041VB/1M and 4043VB/1S.
a Install the FIN label, item (12), from 4041VB/1M onto 4043VB/1S,
refer to Ref. Fig. 7JG1 Wing Wiring Modification, SHEET 02, and Ref.
ESP A350-A-20-32-23-01ZZZ-042Z-A:
1 FIN LABEL 4119VCA   Item (12) Retained
using:
3 TIE-CABLE NSA935401-04B Item 1
b Install the FIN label, item (11), from 4043VB/1S onto 4041VB/1M,
refer to Ref. Fig. 7JG1 Wing Wiring Modification, SHEET 02, and Ref.
ESP A350-A-20-32-23-01ZZZ-042Z-A:
1 FIN LABEL 7JG1A   Item (11) Retained
using:
3 TIE-CABLE NSA935401-04B Item 1
(g) Secure Backshells in place, refer to Ref. Fig. 7JG1 Wing Wiring Modification,
SHEET 02, using:
  Wire - Locking Dia: 0.8
mm CRES Nickel Alloy
14QFB1  
(h) Do a continuity test of the new and/or modified electrical wires, refer to Ref. ESP
A350-A-20-52-21-00ZZZ-36AZ-A.

### Page 49

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP029-A-FAPE3-05T6Z-A-002-01 SHEET 1/3
REV 00 Dec 16/20 A350-29-P0297JG1 Wing Wiring Modification
Page 49
CONF ALL
A
B
Z190 A
Z500
Z570
571FB
C
B
E
ICN-A350-A-29XXP029-A-FAPE3-05T6Z-A-002-01

### Page 50

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP029-A-FAPE3-05T70-A-002-01 SHEET 2/3
REV 00 Dec 16/20 A350-29-P0297JG1 Wing Wiring Modification
Page 50
CONF ALL
NOTE:
REMOVE EXISTING LOCKWIRE01
BEFORE
MANIFOLD
21JX
(9)
7JG1A
TRANSDUCER
7JG1
(11) (12) (10)014119VCA
HARNESS
4041VB /1M
HARNESS
4043VB /1S
C
(1) (1) (1)
LABEL
D
TYPICAL
D
ICN-A350-A-29XXP029-A-FAPE3-05T70-A-002-01

### Page 51

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP029-A-FAPE3-05T71-A-002-01 SHEET 3/3
REV 00 Dec 16/20 A350-29-P0297JG1 Wing Wiring Modification
Page 51
CONF ALL
NOTE:
SECURE BACKSHELL IN PLACE USING MATERIAL No 14QFB102
AFTER
MANIFOLD
21JX
TRANSDUCER
7JG1
(12) (9)024119VCA
HARNESS
HARNESS
4043VB /1S
4041VB /1M
(10)
7JG1A
02
(11)
1 1 1
LABEL
TYPICAL
F
F
E
ICN-A350-A-29XXP029-A-FAPE3-05T71-A-002-01

### Page 52

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP029-A-FAPE3-05SYD-A-002-01 SHEET 1/2
REV 00 Dec 16/20 A350-29-P0297JG1 Wing Wiring Diagram
Page 52
CONF ALL
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE DRD24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S 
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 2911
ICN-A350-A-29XXP029-A-FAPE3-05SYD-A-002-01
F.R.
F.R.
F.R.
2M
1M
RR
YY
BB
GG
R4089
DRB24 B
R4088
DRB24 B
R
4082
Y
B
G
RR
Y
BB
GG
R4090
DRB24 B
2MY
A
A
A
571
2454VC059
<X
<Y
K
L
571
2454VC137
571
2454VC205
B
C
D
E
EXISTING WIRE
BEFORE
571
4115VC
1
2
A
F.R. FOR REFERENCE
7JG1
FLUID TEMP ENG 1 PUMP CASE DRAIN, G
571
XDCR-
A
1
2
3
4
A
3
4
1
5
571
4119VC

### Page 53

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP029-A-FAPE3-05SYE-A-001-01 SHEET 2/2
REV 00 Dec 16/20 A350-29-P0297JG1 Wing Wiring Diagram
Page 53
CONF ALL
UNLESS OTHERWISE SPECIFIED ALL WIRES ARE DRD24 GAUGE
UNLESS OTHERWISE SPECIFIED ALL ROUTES ARE 1S 
NOTE : UNLESS OTHERWISE SPECIFIED PREFIX ALL WIRE IDENTIFICATION WITH ATA 2911
ICN-A350-A-29XXP029-A-FAPE3-05SYE-A-001-01
F.R.
F.R.
F.R.
R
Y
B
G
2M
1M
R4089
DRB24 B
R
4082
Y
B
G
R4088
DRB24 B
R
Y
B
G
R4090
DRB24 B
2MY
A
A
A
571
2454VC059
<X
<Y
571
2454VC205
B
C
D
E
K
L
571
2454VC137
EXISTING WIRE
571
4115VC
1
2
AFTER
A
F.R. FOR REFERENCE
A
1
2
3
4
571
4119VC
7JG1
FLUID TEMP ENG 1 PUMP CASE DRAIN, G
571
XDCR-
A
3
4
1
5

### Page 54

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 54
(19) Task A350-A-29-XX-P029-04001-920A-A (A350-A-29-XX-P029-04ZZZ-920Z-A)
Option 1 - Modify the Green CD Manifold (FIN 22JX) on Aircraft
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
671 Access Panel 671FB
Manpower/Resources/Skills
Man-hours
Minimum Number of person
Elapsed Time
Skills Airframe
Referenced Information
Manuals/Drawings References/Sheets
VSB PARKER HANNIFIN CORPORATION (93835)VSB 945193-29-525
Procedure
(a) Modify the Case Drain Filter Manifold (FIN 22JX) in accordance with Ref. PARKER
HANNIFIN CORPORATION (93835) VSB 945193-29-525.
(b) After the modification:
FIN 22JX
1 MANIFOLD-FILTER,EDP
CD
945193-3    
(c) Add 945193–29–525 ink marking in accordance with Ref. PARKER HANNIFIN
CORPORATION (93835) VSB 945193-29-525.
(20) Task A350-A-29-XX-P029-06001-520A-A (A350-A-29-XX-P029-06ZZZ-520Z-A)
Option 2 - Remove and Retain the Green CD Manifold (FIN 22JX)
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
671 Access Panel 671FB
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Electrical
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-29-33-56-01ZZZ-520Z-A
Procedure

### Page 55

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 55
(a) Remove the Green Case Drain Filter Manifold (FIN 22JX), refer to Ref. MP A350-A-
29-33-56-01ZZZ-520Z-A.
FIN 22JX
1 MANIFOLD-FILTER,EDP
CD
945193-3   Retain
NOTE: Retained for modification.
(21) Task A350-A-29-XX-P029-09001-920A-C (A350-A-29-XX-P029-09ZZZ-920Z-C)
Option 2 - Modify the Green CD Manifold (FIN 22JX)
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
671 Access Panel 671FB
Manpower/Resources/Skills
Man-hours
Minimum Number of person
Elapsed Time
Skills Electrical
Material necessary to do the job
Re-identified Part Set
ITEM NEW PART No. KEYWORD ITEM OLD PART No. SEE NOTES
945193-4 MANIFOLD 945193-3 (1)
NOTE(S)
(1): Parts are re-identified in accordance with Ref. PARKER HANNIFIN CORPORATION
(93835) VSB 945193-29-540.
Referenced Information
Manuals/Drawings References/Sheets
VSB PARKER HANNIFIN CORPORATION (93835)VSB 945193-29-540
Procedure
(a) Modify the Case Drain Filter Manifold (FIN 22JX) in accordance with Ref. PARKER
HANNIFIN CORPORATION (93835) VSB 945193-29-540.
(b) After the modification:
FIN 22JX
1 MANIFOLD-FILTER,EDP
CD
945193-3    
becomes
FIN 22JX
1 MANIFOLD-FILTER,EDP
CD
945193-4  
(22) Task A350-A-29-XX-P029-08001-720A-A (A350-A-29-XX-P029-08ZZZ-720Z-A)
Option 2 - Install the Modified Green CD Manifold (FIN 22JX)

### Page 56

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 56
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Electrical
Material necessary to do the job
Re-identified Part Set
ITEM NEW PART No. KEYWORD ITEM OLD PART No. SEE NOTES
945193-4 MANIFOLD 945193-3 (1)
NOTE(S)
(1): Parts are re-identified in accordance with Ref. PARKER HANNIFIN CORPORATION
(93835) VSB 945193-29-540.
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-29-33-56-08ZZZ-720Z-A
Procedure
(a) Install the Green Case Drain Filter Manifold (FIN 22JX), refer to Ref. MP A350-A-
29-33-56-08ZZZ-720Z-A.
FIN 22JX
1 MANIFOLD-FILTER,EDP
CD
945193-4  
NOTE: Do not connect the electrical Connector until the new wiring installation
is complete.
(23) Task A350-A-29-XX-P029-12001-920A-A (A350-A-29-XX-P029-12ZZZ-920Z-A)
Option 3 - Replace the Green CD Manifold (FIN 22JX)
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
671 Access Panel 671FB
Manpower/Resources/Skills
Man-hours 2.00 h
Minimum Number of person 1
Elapsed Time 2.00 h
Skills Airframe
Material necessary to do the job
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
945193-4 1 MANIFOLD (1)
NOTE(S)

### Page 57

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 57
Equipment
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-29-33-56-01ZZZ-520Z-AA350-A-29-33-56-08ZZZ-720Z-A
Procedure
(a) Remove the Green Case Drain Filter Manifold (FIN 22JX), refer to Ref. MP A350-A-
29-33-56-01ZZZ-520Z-A.
FIN 22JX
1 MANIFOLD-FILTER,EDP
CD
945193-3   Discard
(b) Install the Green Case Drain Filter Manifold (FIN 22JX), refer to Ref. MP A350-A-
29-33-56-08ZZZ-720Z-A.
FIN 22JX
1 MANIFOLD-FILTER,EDP
CD
945193-4  
NOTE: Do not connect the electrical Connector until the new wiring installation
is complete.
(24) Task A350-A-29-XX-P029-04001-900A-A (A350-A-29-XX-P029-04ZZZ-900Z-A)
Modify the Wing Wiring to the Temp XDCR (FIN 7JG2)
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
671 Access Panel 671FB
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Electrical
Material necessary to do the job
Consumables
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
14QFB1 Wire - Locking Dia: 0.8 mmCRES Nickel Alloy
Components
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
1 NSA935401-04B 6 TIE (1) (2)

### Page 58

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 58
Components
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
(2): Operator supplied standard hardware parts, required to accomplish this Service
Bulletin, are to be supplied from the operator's stock.
Referenced Information
Manuals/Drawings References/Sheets
ESP
A350-A-20-32-23-01ZZZ-042Z-A
A350-A-20-33-XX-01ZZZ-042Z-A
A350-A-20-4X-XX-01ZZZ-042Z-A
A350-A-20-52-10-01ZZZ-042Z-A
A350-A-20-52-21-00ZZZ-36AZ-A
A350-A-20-54-50-01ZZZ-042Z-A
A350-A-20-54-55-01ZZZ-042Z-A
SD A350-A-06-3X-XX-01ZZZ-04CZ-AA350-A-06-4X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard practices given in this procedure:
1 For the identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-
04CZ-A.
2 For the identification of access panels, refer to Ref. SD A350-A-06-4X-XX-
01ZZZ-04CZ-A.
3 T ag all the parts you must remove and retain to make the subsequent
installation easier.
4 Do a check of the electrical connectors before you connect them, refer to
Ref. ESP A350-A-20-52-10-01ZZZ-042Z-A.
5 For the protection of the connectors, contacts and terminals, refer to Ref.
ESP A350-A-20-54-50-01ZZZ-042Z-A.
6 For the general installation of electrical wire harnesses, refer to Ref. ESP
A350-A-20-33-XX-01ZZZ-042Z-A.
7 For the removal and installation of electrical items and connecting parts,
refer to Ref. ESP A350-A-20-4X-XX-01ZZZ-042Z-A.
8 For the protection and stowage of the terminals, contacts and cables, refer
to Ref. ESP A350-A-20-54-55-01ZZZ-042Z-A.
(b) Locate bundle 4044VB-2M and 4046VB-2S on the RH FTE, refer to Ref. Fig. 7JG2
Wing Wiring Modification.
(c) Remove stowed connector FIN 4118VCA, item (14), from the dummy receptacle,
refer to Ref. Fig. 7JG2 Wing Wiring Modification, SHEET 01.
FIN 4118VCA
1 CONNECTOR   Item (14) Retain

### Page 59

A350
SERVICE BULLETIN
REV 00 Dec 16/20 A350-29-P029
Page 59
(d) Connect the previously stowed connector FIN 4118VCA, item (14), to
the T emperature Transducer FIN 7JG2, refer to Ref. Fig. 7JG2 Wing Wiring
Modification, SHEET 02, and Ref. Fig. 7JG2 Wing Wiring Diagram.
FIN 4118VCA
1 CONNECTOR   Item (14) Retained
(e) Install the removed connector FIN 7JG2A, item (13), onto the dummy receptacle,
refer to Ref. Fig. 7JG2 Wing Wiring Modification, SHEET 02, and Ref. Fig. 7JG2
Wing Wiring Diagram.
FIN 7JG2A
1 CONNECTOR   Item (13) Retained
(f) Re-Identify the switched connectors.
1 Remove the labels from bundles 4044VB/2M and 4046VB/2S.
a Remove the FIN label, item (16), from the bundle 4044VB/2M, refer to
Ref. Fig. 7JG2 Wing Wiring Modification, SHEET 01:
1 FIN LABEL 4118VCA   Item (16) Retain
3 TIE-CABLE   Item (1) Discard
b Remove the FIN label, item (15), from the bundle 4046VB/2S, refer to
Ref. Fig. 7JG2 Wing Wiring Modification, SHEET 01:
1 FIN LABEL 7JG2   Item (15) Retain
3 TIE-CABLE   Item (1) Discard
2 Install the labels onto the bundles 4044VB/2M and 4046VB/2S.
a Install the FIN label, item (16), from 4044VB/2M onto 4046VB/2S,
refer to Ref. Fig. 7JG2 Wing Wiring Modification, SHEET 02, and Ref.
ESP A350-A-20-32-23-01ZZZ-042Z-A:
1 FIN LABEL 4118VCA   Item (16) Retained
using:
3 TIE-CABLE NSA935401-04B Item 1
b Install the FIN label, item (15), from 4046VB/2S onto 4044VB/2M,
refer to Ref. Fig. 7JG2 Wing Wiring Modification, SHEET 02, and Ref.
ESP A350-A-20-32-23-01ZZZ-042Z-A:
1 FIN LABEL 7JG2   Item (15) Retained
using:
3 TIE-CABLE NSA935401-04B Item 1
(g) Secure Backshells in place, refer to Ref. Fig. 7JG2 Wing Wiring Modification,
SHEET 02, using:
  Wire - Locking Dia: 0.8
mm CRES Nickel Alloy
14QFB1  
(h) Do a continuity test of the new and/or modified electrical wires, refer to Ref. ESP
A350-A-20-52-21-00ZZZ-36AZ-A.

### Page 60

A350
SERVICE BULLETIN
Figure ICN-A350-A-29XXP029-A-FAPE3-05T72-A-002-01 SHEET 1/3
REV 00 Dec 16/20 A350-29-P0297JG2 Wing Wiring Modification
Page 60
CONF ALL
A
B
Z190
Z600
A
Z670
671FB
C
B
E
ICN-A350-A-29XXP029-A-FAPE3-05T72-A-002-01

The text continues at https://openairdocs.org/service-documents/airbus/a350-29-p029/file/31f6aec94285.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
