# Airbus Service Bulletin A350-32-P057

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 01 ("A350-32-P057 Rev 0"), 28 pages: PDF https://openairdocs.org/files/sha256/9c/07/9c075c04c4f48bb4e654d0bada8d4b2b779c797274b8573a59791e4b2095d487; text https://openairdocs.org/service-documents/airbus/a350-32-p057/file/9c075c04c4f4.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2025-0611; AD 2026-02-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 01 ("A350-32-P057 Rev 1"), 31 pages: PDF https://openairdocs.org/files/sha256/b3/17/b31763b632fea4b9e3acf994a5570a94de43987b9163c616a0b88cee30679da5; text https://openairdocs.org/service-documents/airbus/a350-32-p057/file/b31763b632fe.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2025-0611; AD 2026-02-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A350-32-P057
- Latest revision known: A350-32-P057, Revision 01, dated December 12, 2024 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus/a350-32-p057

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2026-02-07](https://openairdocs.org/ad/2026-02-07.md), effective Mar 9, 2026: Revision 01

## Text (28 pages)

Revision 01, the newest copy. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2025-0611; AD 2026-02-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

A350
SERVICE BULLETIN
REV 00 Sep 30/24 A350-32-P057
Page 1
CONF ALL
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
 
The content of this document is the property of Airbus. All rights including copyrights are reserved.
It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may information
contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of the
copyright. Requests for reproduction of any data in this document and the media authorized for it must
be addressed to Airbus.
MANDATORY MANDATORY MANDATORY
ATA SYSTEM: 32
TITLE: LANDING GEAR - NOSE LANDING GEAR (NLG) - LOWER TORQUE
LINKS MISSING BRIGHT SHOT PEENING
MODIFICATION No.:
None

### Page 2

A350
SERVICE BULLETIN
SUMMARY
REV 00 Sep 30/24 A350-32-P057
Page 2
ATA SYSTEM: 32
TITLE: LANDING GEAR - NOSE LANDING GEAR (NLG) - LOWER TORQUE
LINKS MISSING BRIGHT SHOT PEENING
SUMMARY
This summary is for information only and is not approved for modification of the aircraft.
A. MODIFICATIONS
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
B. REASON
(1) History
During initial production of the Entry Into Service (EIS) standard NLG, some lower
torque links (Part Number (PN) 5035-0401) were manufactured without bright shot
peening. The omission of bright shot peening may reduce the life limitation of the
component, depending on which aircraft weight variant and NLG standard the
component is installed on.
(2) Objective/Action
The objective of this Inspection Service Bulletin (ISB) is to give the required
information for the operators to be able to determine for each affected lower torque
link the new life limitation.
(3) Advantages
The accomplishment of this ISB ensures that the right life for the affected torque link
and therefore ensure to not exceed the correct life limitation.
(4) Operational/Maintenance Consequences
None
C. GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE MANDATORY COST SAVING NO
A/C OPERATION
AFFECTED
NO VENDOR SB NO
CANCELS INSPECTION SB NO ETOPS AFFECTED NO
PAX COMFORT AFFECTED NO POTENTIAL AD NO
RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO
LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO
NOTE: Service Bulletin must be accomplished.
D. MAINTENANCE CONFIGURATION

### Page 3

A350
SERVICE BULLETIN
SUMMARY
REV 00 Sep 30/24 A350-32-P057
Page 3
No specific aircraft maintenance configuration required.
E. MATERIAL PRICE INFORMATION
(1) Inspection of the PN and Serial Number (SN) on the NLG Lower Torque Link
(a) T ask set A350-A-32-XX-P057-01000-93BA-A Inspection of the PN and SN on the
NLG Lower T orque Link
No material
(2) Depending on the Inspection Result, Replace the NLG Lower Torque Link
(a) T ask set A350-A-32-XX-P057-01000-93AA-A Depending on the Inspection Result,
Replace the NLG Lower T orque Link
No material
F. APPLICABILITY
This Service Bulletin is applicable to this (these) operator(s):
AAR AFL AFR AIC BAW CAL CCA CES CPA CSC CSN DAL DLH EDW ETD ETH EVE FBU FIN FJI
FWI GAF HVN IBE ITY JAL KAL KAY MAS MAU PAL QTR SAS SIA SJX SWR THA THY UAE VIR WFL
G. CONCURRENT REQUIREMENTS
None
H. NATURE OF THE WORK
(1) Inspection of the PN and Serial Number (SN) on the NLG Lower Torque Link
(a) T ask set A350-A-32-XX-P057-01000-93BA-A Inspection of the PN and SN on the
NLG Lower T orque Link
AIRCRAFT NO
EQUIPMENT YES
(2) Depending on the Inspection Result, Replace the NLG Lower Torque Link
(a) T ask set A350-A-32-XX-P057-01000-93AA-A Depending on the Inspection Result,
Replace the NLG Lower T orque Link
AIRCRAFT NO
EQUIPMENT YES
I. MANPOWER
(1) Inspection of the PN and Serial Number (SN) on the NLG Lower Torque Link
(a) T ask set A350-A-32-XX-P057-01000-93BA-A Inspection of the PN and SN on the
NLG Lower T orque Link
MANPOWER
TOTAL MAN-HOURS 0.75 h
ELAPSED TIME (HOURS) 0.75 h
(2) Depending on the Inspection Result, Replace the NLG Lower Torque Link
(a) T ask set A350-A-32-XX-P057-01000-93AA-A Depending on the Inspection Result,
Replace the NLG Lower T orque Link
MANPOWER
TOTAL MAN-HOURS 8.00 h

### Page 4

A350
SERVICE BULLETIN
SUMMARY
REV 00 Sep 30/24 A350-32-P057
Page 4
MANPOWER
ELAPSED TIME (HOURS) 4.00 h

### Page 5

A350
SERVICE BULLETIN
SUMMARY
Figure ICN-A350-A-32XXP057-A-FAPE3-07KQ4-A-001-01 Fig.SA Sol.AA SHEET 1/1
REV 00 Sep 30/24 A350-32-P057General Overview
Page 5
J. GENERAL OVERVIEW
CONF ALL
Z711
A
A
INSPECTION OF THE PART NUMBER (PN)
AND SERIAL NUMBER (SN) ON THE
NOSE LANDING GEAR (NLG)
5011GN
LOWER TORQUE LINK
ICN-A350-A-32XXP057-A-FAPE3-07KQ4-A-001-01

### Page 6

A350
SERVICE BULLETIN
REV 00 Sep 30/24 A350-32-P057
Page 6
ATA SYSTEM: 32
TITLE: LANDING GEAR - NOSE LANDING GEAR (NLG) - LOWER TORQUE
LINKS MISSING BRIGHT SHOT PEENING
1. PLANNING INFORMATION
A. APPLICABILITY
(1) Models
ON A/C 0065, 0071, 0088, 0102, 0110, 0118, 0125, 0141, 0161, 0169, 0188, 0206, 0215,
0225, 0229, 0233, 0241, 0252, 0258, 0262, 0266, 0274, 0286, 0290, 0296, 0298, 0306,
0315, 0319, 0326, 0330, 0332, 0336, 0340, 0342, 0346, 0350, 0356, 0362, 0368, 0372,
0374, 0380, 0382, 0386, 0388, 0399, 0402, 0409, 0415, 0420, 0424, 0426, 0430, 0432,
0434, 0438, 0440, 0444, 0446, 0473, 0482, 0490, 0492, 0495, 0503, 0507, 0509, 0533,
0539, 0547, 0560, 0563, 0584, 0600, 0605, 0609, 0610, 0617, 0623, 0628, 0635, 0639,
0647, 0652, 0655, 0662, 0670, 0676, 0679, 0683, 0686, 0691, 0702, 0710, 0717, 0719,
0723, 0729, 0730, 0733, 0736, 0740, 0743, 0751, 0761
350-1041
ON A/C 0005-0058, 0060-0064, 0066-0070, 0072-0087, 0089-0101, 0103-0107, 0109, 0111-
0117, 0119-0124, 0126-0130, 0132-0138, 0140, 0142-0151, 0153-0155, 0157-0160, 0162-
0165, 0167, 0168, 0170, 0172-0187, 0189-0193, 0195-0205, 0207-0214, 0216-0221, 0223,
0224, 0226-0228, 0230-0232, 0234-0240, 0243-0251, 0254-0257, 0259-0261, 0263-0265,
0267-0273, 0276-0285, 0287, 0289, 0291-0295, 0297, 0299-0303, 0305, 0307-0314, 0316,
0318, 0320-0325, 0327-0329, 0331, 0333-0335, 0337-0339, 0341, 0343-0345, 0347-0349,
0351, 0352, 0354, 0355, 0357-0359, 0363-0366, 0369-0371, 0373, 0375, 0376, 0378, 0379,
0381, 0383, 0385, 0387, 0389-0398, 0400, 0401, 0403-0408, 0410-0414, 0416-0419, 0421-
0423, 0425, 0427-0429, 0431, 0433, 0435-0437, 0439, 0441-0443, 0445, 0447-0449, 0451-
0455, 0457-0460, 0462-0466, 0468-0472, 0474-0476, 0478-0481, 0483-0485, 0487-0489,
0491, 0493, 0494, 0496, 0497, 0499, 0500, 0502, 0504-0506, 0510, 0512, 0516, 0517, 0520,
0524, 0526, 0528, 0530, 0531, 0535-0537, 0540-0546, 0548-0552, 0554, 0556-0559, 0561,
0562, 0564, 0565, 0567-0583, 0585, 0587-0599, 0602-0604, 0607, 0611-0616, 0618, 0619,
0621, 0622, 0624-0627, 0629-0634, 0636-0638, 0640-0646, 0648-0651, 0653, 0654, 0656-
0661, 0663-0669, 0671-0675, 0677, 0678, 0680-0682, 0684, 0685, 0687-0690, 0692-0699,
0703-0706, 0708, 0709, 0711-0716, 0718, 0720-0722, 0724-0727, 0731, 0732, 0734, 0735,
0737-0739, 0741, 0742, 0745-0750, 0752, 0753, 0755
350-941
CONF ALL
(2) Applicability by MSN
0005-0058 0060-0107 0109-0130 0132-0138 0140-0151 0153-0155 0157-0165 0167-
0170 0172-0193 0195-0221 0223-0241 0243-0252 0254-0274 0276-0287 0289-0303
0305-0316 0318-0352 0354-0359 0362-0366 0368-0376 0378-0383 0385-0449 0451-
0455 0457-0460 0462-0466 0468-0476 0478-0485 0487-0497 0499 0500 0502-0507
0509 0510 0512 0516 0517 0520 0524 0526 0528 0530 0531 0533 0535-0537 0539-
0552 0554 0556-0565 0567-0585 0587-0600 0602-0605 0607 0609-0619 0621-0699
0702-0706 0708-0727 0729-0743 0745-0753 0755 0761
(3) MSN by configuration
MSN CONFIGURATION
0005 0006 0007 0008 0009 0010 0011 0012 0013 0014 0015
0016 0017 0018 0019 0020 0021 0022 0023 0024 0025 0026
0027 0028 0029 0030 0031 0032 0033 0034 0035 0036 0037
0038 0039 0040 0041 0042 0043 0044 0045 0046 0047 0048
0049 0050 0051 0052 0053 0054 0055 0056 0057 0058 0060
001

### Page 7

A350
SERVICE BULLETIN
REV 00 Sep 30/24 A350-32-P057
Page 7
MSN CONFIGURATION
0061 0062 0063 0064 0065 0066 0067 0068 0069 0070 0071
0072 0073 0074 0075 0076 0077 0078 0079 0080 0081 0082
0083 0084 0085 0086 0087 0088 0089 0090 0091 0092 0093
0094 0095 0096 0097 0098 0099 0100 0101 0102 0103 0104
0105 0106 0107 0109 0110 0111 0112 0113 0114 0115 0116
0117 0118 0119 0120 0121 0122 0123 0124 0125 0126 0127
0128 0129 0130 0132 0133 0134 0135 0136 0137 0138 0140
0141 0142 0143 0144 0145 0146 0147 0148 0149 0150 0151
0153 0154 0155 0157 0158 0159 0160 0161 0162 0163 0164
0165 0167 0168 0169 0170 0172 0173 0174 0175 0176 0177
0178 0179 0180 0181 0182 0183 0184 0185 0186 0187 0188
0189 0190 0191 0192 0193 0195 0196 0197 0198 0199 0200
0201 0202 0203 0204 0205 0206 0207 0208 0209 0210 0211
0212 0213 0214 0215 0216 0217 0218 0219 0220 0221 0223
0224 0225 0226 0227 0228 0229 0230 0231 0232 0233 0234
0235 0236 0237 0238 0239 0240 0241 0243 0244 0245 0246
0247 0248 0249 0250 0251 0252 0254 0255 0256 0257 0258
0259 0260 0261 0262 0263 0264 0265 0266 0267 0268 0269
0270 0271 0272 0273 0274 0276 0277 0278 0279 0280 0281
0282 0283 0284 0285 0286 0287 0289 0290 0291 0292 0293
0294 0295 0296 0297 0298 0299 0300 0301 0302 0303 0305
0306 0307 0308 0309 0310 0311 0312 0313 0314 0315 0316
0318 0319 0320 0321 0322 0323 0324 0325 0326 0327 0328
0329 0330 0331 0332 0333 0334 0335 0336 0337 0338 0339
0340 0341 0342 0343 0344 0345 0346 0347 0348 0349 0350
0351 0352 0354 0355 0356 0357 0358 0359 0362 0363 0364
0365 0366 0368 0369 0370 0371 0372 0373 0374 0375 0376
0378 0379 0380 0381 0382 0383 0385 0386 0387 0388 0389
0390 0391 0392 0393 0394 0395 0396 0397 0398 0399 0400
0401 0402 0403 0404 0405 0406 0407 0408 0409 0410 0411
0412 0413 0414 0415 0416 0417 0418 0419 0420 0421 0422
0423 0424 0425 0426 0427 0428 0429 0430 0431 0432 0433
0434 0435 0436 0437 0438 0439 0440 0441 0442 0443 0444
0445 0446 0447 0448 0449 0451 0452 0453 0454 0455 0457
0458 0459 0460 0462 0463 0464 0465 0466 0468 0469 0470
0471 0472 0473 0474 0475 0476 0478 0479 0480 0481 0482
0483 0484 0485 0487 0488 0489 0490 0491 0492 0493 0494
0495 0496 0497 0499 0500 0502 0503 0504 0505 0506 0507
0509 0510 0512 0516 0517 0520 0524 0526 0528 0530 0531
0533 0535 0536 0537 0539 0540 0541 0542 0543 0544 0545
0546 0547 0548 0549 0550 0551 0552 0554 0556 0557 0558
0559 0560 0561 0562 0563 0564 0565 0567 0568 0569 0570
0571 0572 0573 0574 0575 0576 0577 0578 0579 0580 0581
0582 0583 0584 0585 0587 0588 0589 0590 0591 0592 0593
0594 0595 0596 0597 0598 0599 0600 0602 0603 0604 0605
0607 0609 0610 0611 0612 0613 0614 0615 0616 0617 0618
0619 0621 0622 0623 0624 0625 0626 0627 0628 0629 0630
0631 0632 0633 0634 0635 0636 0637 0638 0639 0640 0641
0642 0643 0644 0645 0646 0647 0648 0649 0650 0651 0652
0653 0654 0655 0656 0657 0658 0659 0660 0661 0662 0663
0664 0665 0666 0667 0668 0669 0670 0671 0672 0673 0674
0675 0676 0677 0678 0679 0680 0681 0682 0683 0684 0685
0686 0687 0688 0689 0690 0691 0692 0693 0694 0695 0696
0697 0698 0699 0702 0703 0704 0705 0706 0708 0709 0710
0711 0712 0713 0714 0715 0716 0717 0718 0719 0720 0721

### Page 8

A350
SERVICE BULLETIN
REV 00 Sep 30/24 A350-32-P057
Page 8
MSN CONFIGURATION
0722 0723 0724 0725 0726 0727 0729 0730 0731 0732 0733
0734 0735 0736 0737 0738 0739 0740 0741 0742 0743 0745
0746 0747 0748 0749 0750 0751 0752 0753 0755 0761
(4) Configuration definition
Configuration 001
CONF 001 is applicable for all the aircraft affected by this Service Bulletin as a
standard configuration.
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
During initial production of the Entry Into Service (EIS) standard NLG, some lower
torque links (Part Number (PN) 5035-0401) were manufactured without bright shot
peening. The omission of bright shot peening may reduce the life limitation of the
component, depending on which aircraft weight variant and NLG standard the
component is installed on.
(2) Objective/Action
The objective of this Inspection Service Bulletin (ISB) is to give the required
information for the operators to be able to determine for each affected lower torque
link the new life limitation.
(3) Advantages
The accomplishment of this ISB ensures that the right life for the affected torque link
and therefore ensure to not exceed the correct life limitation.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
T o accomplish this Service Bulletin it is necessary to:
(1) Inspection of the PN and Serial Number (SN) on the NLG Lower Torque Link
(a) T ask set A350-A-32-XX-P057-01000-93BA-A Inspection of the PN and SN on the
NLG Lower T orque Link
1 Inspect the PN and SN on the NLG Lower T orque Link
(2) Depending on the Inspection Result, Replace the NLG Lower Torque Link
(a) T ask set A350-A-32-XX-P057-01000-93AA-A Depending on the Inspection Result,
Replace the NLG Lower T orque Link
1 Replace the NLG Lower T orque Link
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.

### Page 9

A350
SERVICE BULLETIN
REV 00 Sep 30/24 A350-32-P057
Page 9
(2) Accomplishment Timescale
Accomplishment of this Service Bulletin must be done within a maximum of 30 days
from the initial issue date of the ISB.
This Service Bulletin has been classified Mandatory. It is expected that an
Airworthiness Directive (AD) published by the European Union Aviation Safety Agency
(EASA) will be issued to confirm this classification. It is anticipated that the AD will
confirm the thresholds and/or interval given above but reference should be made to
the AD for confirmation of the mandated accomplishment timescale.
F. APPROVAL
The technical content of this document is approved under the authority of the Design
Organisation Approval ref. EASA.21J.031.
If an aircraft listed in the applicability has a modification or repair embodied that is not
of AIRBUS origin, and which affects the content of this Service Bulletin, the operator
is responsible for obtaining approval by its airworthiness authority for any adaptation
necessary before incorporation of the Service Bulletin.
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Inspection of the PN and Serial Number (SN) on the NLG Lower Torque Link
(a) T ask set A350-A-32-XX-P057-01000-93BA-A Inspection of the PN and SN on the
NLG Lower T orque Link
PREPARATION
Job Set-up 0.25 h
PROCEDURE
Inspect the PN and SN on the NLG Lower T orque Link 0.25 h
PREPARATION FOR TEST
None
TEST
None
CLOSE-UP
Close-up 0.25 h
TOTAL MAN-HOURS 0.75 h
ELAPSED TIME (HOURS) 0.75 h
(2) Depending on the Inspection Result, Replace the NLG Lower Torque Link
(a) T ask set A350-A-32-XX-P057-01000-93AA-A Depending on the Inspection Result,
Replace the NLG Lower T orque Link
PREPARATION
Job Set-up 1.00 h
PROCEDURE
Replace the NLG Lower T orque Link 2.00 h

### Page 10

A350
SERVICE BULLETIN
REV 00 Sep 30/24 A350-32-P057
Page 10
PREPARATION FOR TEST
None
TEST
Clearance Check 4.00 h
CLOSE-UP
Close-up 1.00 h
TOTAL MAN-HOURS 8.00 h
ELAPSED TIME (HOURS) 4.00 h
H. WEIGHT AND BALANCE
Not changed
I. ELECTRICAL LOAD DATA
Not changed
J. REFERENCES
(1) Inspection of the PN and Serial Number (SN) on the NLG Lower Torque Link
(a) T ask set A350-A-32-XX-P057-01000-93BA-A Inspection of the PN and SN on the
NLG Lower T orque Link
AIRWORTHINESS LIMITATION SECTION (ALS)
Part 1
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP)
A350-A-24-41-XX-00ZZZ-170Z-A
SYSTEM DESCRIPTION (SD)
A350-A-06-3X-XX-01ZZZ-04CZ-A
(2) Depending on the Inspection Result, Replace the NLG Lower Torque Link
(a) T ask set A350-A-32-XX-P057-01000-93AA-A Depending on the Inspection Result,
Replace the NLG Lower T orque Link
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP)
A350-A-24-41-XX-00ZZZ-170Z-A A350-A-32-21-69-00ZZZ-520Z-A
A350-A-32-21-69-00ZZZ-720Z-A

### Page 11

A350
SERVICE BULLETIN
REV 00 Sep 30/24 A350-32-P057
Page 11
SYSTEM DESCRIPTION (SD)
A350-A-06-3X-XX-01ZZZ-04CZ-A
K. PUBLICATION AFFECTED
None
L. INDUSTRY SUPPORT INFORMATION
This Service Bulletin is the subject of an AIRBUS monitored retrofit campaign. For detailed
support, please refer to the related RIL V32M24001635.
For the organization of this retrofit, you are kindly requested to contact AIRBUS retrofit
management department: monitored.retrofit@airbus.com.

### Page 12

A350
SERVICE BULLETIN
REV 00 Sep 30/24 A350-32-P057
Page 12
2. MATERIAL INFORMATION
A. MATERIAL APPLICABILITY
No material for task set A350-A-32-XX-P057-01000-93BA-A Inspection of the PN
and SN on the NLG Lower Torque Link
Material for task set A350-A-32-XX-P057-01000-93AA-A Depending on the
Inspection Result, Replace the NLG Lower Torque Link
MATERIAL QTY SEE NOTES
Referenced tools See SB
Referenced consumables See SB
Referenced parts See SB
B. TOOLING
Referenced tools for task set A350-A-32-XX-P057-01000-93AA-A Depending on the
Inspection Result, Replace the NLG Lower Torque Link
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. MP A350-A-32-21-69-00ZZZ-520Z-A
Ref. MP A350-A-32-21-69-00ZZZ-720Z-A
C. CONSUMABLES
Referenced consumables for task set A350-A-32-XX-P057-01000-93AA-A
Depending on the Inspection Result, Replace the NLG Lower Torque Link
T o accomplish this Service Bulletin it is necessary to use the consumable materials listed in:
Ref. MP A350-A-32-21-69-00ZZZ-720Z-A
D. LIST OF NEW PARTS
Referenced parts for task set A350-A-32-XX-P057-01000-93AA-A Depending on
the Inspection Result, Replace the NLG Lower Torque Link
T o accomplish this Service Bulletin it is necessary to use the expendable parts listed in:
Ref. MP A350-A-32-21-69-00ZZZ-720Z-A
E. LIST OF EXISTING PARTS
No parts

### Page 13

A350
SERVICE BULLETIN
REV 00 Sep 30/24 A350-32-P057
Page 13
3. ACCOMPLISHMENT INSTRUCTIONS
Task set A350-A-32-XX-P057-01000-93BA-A (A350-A-32-XX-P057-01ZZZ-93BZ-A)
Inspection of the PN and SN on the NLG Lower T orque Link
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL
WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND MECHANICALLY
SERVICEABLE). WHEN YOU DO A MAINTENANCE WORK, REPAIRS OR
MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND
THE WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND
DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO Ref. ESP A350-A-20-55-XX-01ZZZ-
042Z-A.
NOTE: The accomplishment instructions of this Service Bulletin include procedures given in
other documents or in other sections of the Service Bulletin. When the words “refer to”
are used and the operator has a procedure accepted by the local authority he belongs to,
the accepted alternative procedure can be used. When the words “in accordance with”
are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service Bulletin.
Operators can therefore, as deemed necessary, omit or add access and/or close-up steps
to add flexibility to their maintenance operations as long as the technical intent of the
Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms. Refer
to paragraph 1.J., References, for the definition of acronyms.
NOTE: This Service Bulletin is classified mandatory or expected to be classified mandatory by
an Airworthiness Directive (AD). The paragraphs 3.C. and 3.E. in these accomplishment
instructions are Required for Compliance (RC) and must be done to comply with the AD.
T o allow more flexibility, the rule "refer to" and "in accordance with" will apply to these
paragraphs 3.C. and 3.E. Other paragraphs are recommended and may be deviated from,
done as part of other actions or done with accepted methods different from those given
in the Service Bulletin, as long as the RC paragraphs can be done and the aircraft can be
put back into a serviceable condition.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance necessary
to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, including Required for Compliance paragraph
contained herein, contact AIRBUS for further instructions and approval.
NOTE: The purpose of flowcharts is to supplement the information given in the Procedure and
Compliance paragraphs and not to serve as the primary source for tasks or compliance
times given in this Service Bulletin.
A. TASK SET ASSOCIATED INFORMATION
Task Manpower
TOTAL MAN-HOURS 0.75 h

### Page 14

A350
SERVICE BULLETIN
REV 00 Sep 30/24 A350-32-P057
Page 14
ELAPSED TIME (HOURS) 0.75 h
B. PREPARATION
(1) Task A350-A-32-XX-P057-01001-540A-A (A350-A-32-XX-P057-01ZZZ-540Z-A)
Job Set-up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 0.25 h
Minimum Number of person 1
Elapsed Time 0.25 h
Referenced Information
Manuals/Drawings References/Sheets
INTRO A350-A-00-61-04-11ZZZ-018Z-D
MP A350-A-24-41-XX-00ZZZ-170Z-A
Procedure
NOTE: For the basic Aircraft configuration, refer to Ref. INTRO A350-A-00-61-04-
11ZZZ-018Z-D “Maintenance Procedure - Introduction”.
(a) Make sure that the aircraft is electrically grounded, refer to Ref. MP A350-A-24-
41-XX-00ZZZ-170Z-A.
C. PROCEDURE
(1) Task A350-A-32-XX-P057-01001-311A-A (A350-A-32-XX-P057-01ZZZ-311Z-A)
Inspect the PN and SN on the NLG Lower Torque Link
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
711
Manpower/Resources/Skills
Man-hours 0.25 h
Minimum Number of person 1
Elapsed Time 0.25 h
Referenced Information
Manuals/Drawings References/Sheets
SD A350-A-06-3X-XX-01ZZZ-04CZ-A
ALS Part 1
Procedure
Ref. Fig.BA Inspection of the PN and SN on the NLG Lower T orque Link and Ref. Fig.FA
Flowchart.
(a) Standard Practice given in this procedure:
1 For identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-04CZ-A.
(b) Inspect the PN and SN of NLG lower torque link (FIN 5011GN):

### Page 15

A350
SERVICE BULLETIN
REV 00 Sep 30/24 A350-32-P057
Page 15
1 If the NLG lower torque link PN and SN is listed in accordance with Ref.
Appendix LIST OF THE AFFECTED PN AND SN OF NLG LOWER TORQUE LINK:
a Inspect the new life limitations of the each affected NLG lower torque
link part given in accordance with Ref. Appendix LIFE LIMITATIONS OF
THE AFFECTED NLG LOWER TORQUE LINK.
b Replace the affected NLG lower torque link part less than or equal to
whichever of the life limitations occurs first in accordance with Ref.
T ask A350-A-32-XX-P057-01ZZZ-920Z-A.
NOTE: If a NLG lower torque link part moved between the aircrafts
or Weight Variants (WV), consider the remaining life of the
part.
2 If the NLG lower torque link PN and SN is not listed in accordance with Ref.
Appendix LIST OF THE AFFECTED PN AND SN OF NLG LOWER TORQUE LINK:
a Refer to Ref. ALS Part 1 for life limitations.

### Page 16

A350
SERVICE BULLETIN
Figure ICN-A350-A-32XXP057-A-FAPE3-07KWK-A-001-01 Fig.BA Sol.AA SHEET 1/1
REV 00 Sep 30/24 A350-32-P057Inspection of the PN and SN on the NLG Lower T orque Link
Page 16
CONF ALL
B
5011GN
Z711
A
A
B
NOTE:
INSPECT THE SERIAL NUMBER (SN) AND PART NUMBER (PN) ON THE NOSE LANDING GEAR01
01
(NLG) LOWER TORQUE LINK.
ICN-A350-A-32XXP057-A-FAPE3-07KWK-A-001-01

### Page 17

A350
SERVICE BULLETIN
Figure ICN-A350-A-32XXP057-A-FAPE3-07KQ0-A-002-01 Fig.FA Sol.AA SHEET 1/1
REV 00 Sep 30/24 A350-32-P057Flowchart
Page 17
CONF ALL
COMPLIANCE TIMES GIVEN IN THIS SERVICE BULLETIN.
AND COMPLIANCE PARAGRAPHS AND NOT TO SERVE AS THE PRIMARY SOURCE FOR TASKS OR
THE PURPOSE OF FLOWCHARTS IS TO SUPPLEMENT THE INFORMATION GIVEN IN THE PROCEDURE
FOR THE ACCOMPLISHMENT TIMESCALE, REFER TO PARAGRAPH 1.E.(2).01
NOTE:
NO
IDENTIFY THE PART NUMBER (PN) AND SERIAL NUMBER (SN)
01LOWER TORQUE LINK
OF THE NOSE LANDING GEAR (NLG)
YES
REPLACE THE NLG LOWER TORQUE LINK
PART ON OR BEFORE TO WHICHEVER
OF THE LIFE LIMITATIONS OCCURS FIRST
LISTED?
NLG LOWER
TORQUE LINK PN AND SN 
IS THE
GIVEN IN APPENDIX B
THE NLG LOWER TORQUE LINK
CHECK THE NEW LIFE LIMITATION OF
PREVIOUSLY PUBLISHED LIFE
LIMITATION REMAINS APPLICABLE
ICN-A350-A-32XXP057-A-FAPE3-07KQ0-A-002-01

### Page 18

A350
SERVICE BULLETIN
REV 00 Sep 30/24 A350-32-P057
Page 18
D. PREPARATION FOR TEST
None
E. TEST
None
F. CLOSE-UP
(1) Task A350-A-32-XX-P057-01001-740A-A (A350-A-32-XX-P057-01ZZZ-740Z-A)
Close-up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 0.25 h
Minimum Number of person 1
Elapsed Time 0.25 h
Procedure
NOTE: If you intend to accomplish an associated Repair T ask during the same layover
period, the subsequent Close-up procedure is not necessary.
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Put the aircraft back to its initial configuration.
G. ADMINISTRATIVE
(1) Task A350-A-32-XX-P057-01001-90AA-A (A350-A-32-XX-P057-01ZZZ-90AZ-A)
Administrative
Procedure
Confirm in the applicable aircraft records that you have completed all the work defined
in this Service Bulletin task set as required.

### Page 19

A350
SERVICE BULLETIN
REV 00 Sep 30/24 A350-32-P057
Page 19
Task set A350-A-32-XX-P057-01000-93AA-A (A350-A-32-XX-P057-01ZZZ-93AZ-A)
Depending on the Inspection Result, Replace the NLG Lower T orque Link
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL
WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND MECHANICALLY
SERVICEABLE). WHEN YOU DO A MAINTENANCE WORK, REPAIRS OR
MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND
THE WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND
DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO Ref. ESP A350-A-20-55-XX-01ZZZ-
042Z-A.
NOTE: The accomplishment instructions of this Service Bulletin include procedures given in
other documents or in other sections of the Service Bulletin. When the words “refer to”
are used and the operator has a procedure accepted by the local authority he belongs to,
the accepted alternative procedure can be used. When the words “in accordance with”
are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service Bulletin.
Operators can therefore, as deemed necessary, omit or add access and/or close-up steps
to add flexibility to their maintenance operations as long as the technical intent of the
Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms. Refer
to paragraph 1.J., References, for the definition of acronyms.
NOTE: This Service Bulletin is classified mandatory or expected to be classified mandatory by
an Airworthiness Directive (AD). The paragraphs 3.C. and 3.E. in these accomplishment
instructions are Required for Compliance (RC) and must be done to comply with the AD.
T o allow more flexibility, the rule "refer to" and "in accordance with" will apply to these
paragraphs 3.C. and 3.E. Other paragraphs are recommended and may be deviated from,
done as part of other actions or done with accepted methods different from those given
in the Service Bulletin, as long as the RC paragraphs can be done and the aircraft can be
put back into a serviceable condition.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance necessary
to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, including Required for Compliance paragraph
contained herein, contact AIRBUS for further instructions and approval.
NOTE: Discarded parts must be managed at the operator's discretion.
A. TASK SET ASSOCIATED INFORMATION
Task Manpower
TOTAL MAN-HOURS 8.00 h
ELAPSED TIME (HOURS) 4.00 h

### Page 20

A350
SERVICE BULLETIN
REV 00 Sep 30/24 A350-32-P057
Page 20
B. PREPARATION
(1) Task A350-A-32-XX-P057-02001-540A-A (A350-A-32-XX-P057-02ZZZ-540Z-A)
Job Set-up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 2
Elapsed Time 0.50 h
Referenced Information
Manuals/Drawings References/Sheets
INTRO A350-A-00-61-04-11ZZZ-018Z-D
MP A350-A-24-41-XX-00ZZZ-170Z-AA350-A-32-21-69-00ZZZ-520Z-A
Procedure
NOTE: For the basic Aircraft configuration, refer to Ref. INTRO A350-A-00-61-04-
11ZZZ-018Z-D “Maintenance Procedure - Introduction”.
(a) Make sure that the aircraft is electrically grounded, refer to Ref. MP A350-A-24-
41-XX-00ZZZ-170Z-A.
(b) Do the job set-up procedure as specified in the disconnection or removal of the
torque link assemblies of the NLG (FIN 5011GN), refer to Ref. MP A350-A-32-21-
69-00ZZZ-520Z-A.
C. PROCEDURE
(1) Task A350-A-32-XX-P057-01001-920A-A (A350-A-32-XX-P057-01ZZZ-920Z-A)
Replace the NLG Lower Torque Link
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
711
Manpower/Resources/Skills
Man-hours 2.00 h
Minimum Number of person 2
Elapsed Time 1.00 h
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-32-21-69-00ZZZ-520Z-AA350-A-32-21-69-00ZZZ-720Z-A
SD A350-A-06-3X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practice given in this procedure:
1 For identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-04CZ-A.

### Page 21

A350
SERVICE BULLETIN
REV 00 Sep 30/24 A350-32-P057
Page 21
(b) Replace the affected NLG lower torque link (FIN 5011GN):
1 Remove and discard the NLG lower torque link (FIN 5011GN), refer to Ref.
MP A350-A-32-21-69-00ZZZ-520Z-A.
2 Install the new NLG lower torque link or part with sufficient usable life (FIN
5011GN), refer to Ref. MP A350-A-32-21-69-00ZZZ-720Z-A.
D. PREPARATION FOR TEST
None
E. TEST
(1) Task A350-A-32-XX-P057-01001-361A-A (A350-A-32-XX-P057-01ZZZ-361Z-A)
Clearance Check
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 4.00 h
Minimum Number of person 2
Elapsed Time 2.00 h
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-32-21-69-00ZZZ-720Z-A
Procedure
(a) Do the clearance check as specified in the connection or installation of the
torque link assemblies of the NLG (FIN 5011GN), refer to Ref. MP A350-A-32-21-
69-00ZZZ-720Z-A.
F. CLOSE-UP
(1) Task A350-A-32-XX-P057-02001-740A-A (A350-A-32-XX-P057-02ZZZ-740Z-A)
Close-up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 2
Elapsed Time 0.50 h
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-32-21-69-00ZZZ-720Z-A
Procedure
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the close-up procedure as specified in the connection or installation of the
torque link assemblies of the NLG (FIN 5011GN), refer to Ref. MP A350-A-32-21-
69-00ZZZ-720Z-A.

### Page 22

A350
SERVICE BULLETIN
REV 00 Sep 30/24 A350-32-P057
Page 22
(c) Put the aircraft back to its initial configuration.
G. ADMINISTRATIVE
(1) Task A350-A-32-XX-P057-02001-90AA-A (A350-A-32-XX-P057-02ZZZ-90AZ-A)
Administrative
Procedure
Confirm in the applicable aircraft records that you have completed all the work defined
in this Service Bulletin task set as required.

### Page 23

A350
SERVICE BULLETIN
APPENDIX
REV 00 Sep 30/24 A350-32-P057
Page 23
APPENDIX
A. LIST OF THE AFFECTED PN AND SN OF NLG LOWER TORQUE LINK
List of the Affected PN and SN of NLG Lower T orque Link
For the list of affected PN and SN of NLG lower torque link, refer to the next page(s).

### Page 24

A350
SERVICE BULLETIN
APPENDIX
Figure ICN-A350-A-32XXP057-A-FAPE3-07KQ2-A-001-01 Fig.AA Sol.AA SHEET 1/1
REV 00 Sep 30/24 A350-32-P057List of the Affected PN and SN of NLG Lower T orque Link
Page 24
CONF ALL
AFFECTED NOSE LANDING GEAR (NLG) LOWER TORQUE LINKS
PART NUMBER (PN) SERIAL NUMBER (SN)
5035-0401
ZG23
ZG24
ZG25
ZG27
ZG28
ZG29
ZG30
ZG33
ZG34
ZG35
ZG36
ZG37
ZG38
ZG39
ZG41
ZG42
ZG43
ZG46
ZG47
ZG49
ZG51
ZG57
ZG58
ZG60
ZG63
ZG67
ZG68
ZG73
ICN-A350-A-32XXP057-A-FAPE3-07KQ2-A-001-01

### Page 25

A350
SERVICE BULLETIN
APPENDIX
REV 00 Sep 30/24 A350-32-P057
Page 25
B. LIFE LIMITATIONS OF THE AFFECTED NLG LOWER TORQUE LINK
Life Limitations of the Affected NLG Lower T orque Link
For the life limitations of affected PN and SN for the NLG Lower T orque Link, refer to the next
page(s).

### Page 26

A350
SERVICE BULLETIN
APPENDIX
Figure ICN-A350-A-32XXP057-A-FAPE3-07KQ1-A-002-01 Fig.AB Sol.AA SHEET 1/1
REV 00 Sep 30/24 A350-32-P057Life Limitations of the Affected NLG Lower T orque Link
Page 26
CONF ALL
NOMENCLATURE LIMITATIONS LIMITATIONS APPLICABILITY
X
LOWER TORQUE LINK 5035-0401
X
PART
(WHICHEVERNUMBER
OCCURS FIRST)
150000
140050
52840
46580
111740
11850
36000
33610
12595
11180
26815
2845
FLIGHT LANDING WV00x,
WV011,
012, 014,
017, 018
AND 019
WV015 WV013 WV010, 016
AND 023
WV020 WV000,
001, 002,
004, 005,
006, 008,
A350-1000A350-9xx
009, 010
AND 011
X
X
X X X X
X
LIFE LIMITATIONS OF THE AFFECTED NOSE LANDING GEAR (NLG) LOWER TORQUE LINKS
"X" IS USED FOR THE A350 AIRCRAFT WEIGHT VARIANTS (WV) WITH RESPECT TO THE APPLICABLE
NOTE:
THIS LIMITATION APPLIES TO PARTS FITTED TO A350 A/C POST MOD 103627 AND/OR A/C
FITTED WITH SLIDING PISTON ASSY (FIN 5006GN) PN 6407A2000-XX.
REFER TO AIRWORTHINESS LIMITATION SECTION (ALS) PART 1 FOR THE MODIFICATION NUMBER
FOR EACH WV MODIFICATION TO CONSIDER THE APPLICABILITY FOR AN AIRCRAFT (A/C).
01
01
01
01 01 01 01
HOURS
(FH)
(LDG)
LIFE LIMITATION OF THE NLG LOWER TORQUE LINK.
5011GN
(PN)
ICN-A350-A-32XXP057-A-FAPE3-07KQ1-A-002-01

### Page 27

A350
SERVICE BULLETIN
APPENDIX
REV 00 Sep 30/24 A350-32-P057
Page 27
C. REPORTING SHEET
TITLE: LANDING GEAR - NOSE LANDING GEAR (NLG) - LOWER TORQUE LINKS
MISSING BRIGHT SHOT PEENING
MODIFICATION No.: None
(1) SB Reporting status
This Service Bulletin will only be incorporated into affected customized Maintenance
and Flight Operations Products if it is duly reported to Airbus.
(2) GENERAL information
The SB Reporting policy is published in ISI 00.00.00135. This document provides
information regarding: the SB Reporting means and benefits, the update of
customized Maintenance Products and customized Flight Operations Products.
If this Service Bulletin has an operational impact, refer to paragraph "Flight Operations
Products" for further information on the update of affected Flight Operations Products.
(3) SB Reporting procedure
Standard practice to report SB is to use the online reporting application on
AirbusWorld.
Refer to ISI 00.00.00179:
- For complete information on reporting means to Airbus, Question 2 "What are
the standard practices for SB Reporting?"
- If this SB requires previous or simultaneous accomplishment of other SBs,
Question 3 "What about the reporting of prerequisite Service Bulletins?"
NOTE: ISI 00.00.00179 covers all the frequently asked questions about SB Reporting.
It is revised on a regular basis.

### Page 28

A350
SERVICE BULLETIN
APPENDIX
REV 00 Sep 30/24 A350-32-P057
Page 28
D. QUALITY PERCEPTION FORM
Use this form to tell us what is your perception of the quality of this Service Bulletin.
The reported data that you provide us will be used to analyse areas of difficulties and to
take corrective action to further improve the quality of our Service Bulletin.
We thank you for the time you have taken in completing this form.
Quality rating of this SB 4 3 2 1
Quality rating of the Accomplishment Instructions 4 3 2 1
Quality rating of the Illustrations 4 3 2 1
Is this SB easy to understand ? Y / N
NOTE: Please rate on a scale of 1 to 4, with 4 being the highest score
If you have difficulties in the accomplishment of this SB please quote below the area(s) and
give a short description of the issue.
Planning Material Instructions
X Applicability X T ooling X Preparation
X Reason X List of Materials
Operator Supplied
X Mod/Inspection
X Manpower X Kit content X T est
X References X Re-identification X Close-up
X Publication X Illustrations
X Industry Support
Comments :
Operator : Date :
Name/Title
Please return this form to :
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
Or via your Resident Customer Support Office.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
