# Airbus Service Bulletin A350-52-P011

Copy: No revision named ("SB A350-52-P011"), 60 pages: PDF https://openairdocs.org/files/sha256/aa/87/aa87108b2e13597cb14756397246274dc9ec300139d7e213534047b64f93b924; text https://openairdocs.org/service-documents/airbus/a350-52-p011/file/aa87108b2e13.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2018-0410; AD 2018-20-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A350-52-P011
- Page: https://openairdocs.org/service-documents/airbus/a350-52-p011

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2018-20-10](https://openairdocs.org/ad/2018-20-10.md), effective Nov 15, 2018: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/a350-52-p011/proposed.md).

## Text (60 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2018-0410; AD 2018-20-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

@A350
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
This summary is for information only and is not approved for modification of the aircraft.
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 52
TITLE: DOORS - CARGO - INPECTION OF FWD AND AFT CARGO DOOR
PAINT PEEL OFF ON FRAME FORK
**CONF ALL
MODIFICATIONS
None
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
Inspection on structure assembly level revealed that paint peeling might be present on the forward and
aft cargo door frame forks around the hook bolt hole.
This Mandatory Inspection Service Bulletin requests to perform a one time Detailed Inspection of the
frame forks around the hook bolt hole on the FWD and AFT Cargo Door and defines corrective actions
in case of findings.
In case of paint - peeling finding, application of the corrective action will restore the surface treatment to
the required level to tackle corrosion, abrasion effect due to the environment severity.
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE
 MANDATORY (1)
 CANCELS INSPECTION SB
 NO
POTENTIAL AD
 YES
 A/C OPERATION AFFECTED
 NO
RELIABILITY AFFECTED
 NO
 PAX COMFORT AFFECTED
 NO
COST SAVING
 NO
 ETOPS AFFECTED
 NO
STRUCTURAL LIFE EXTN
 NO
 VENDOR SB INVOLVED
 NO
NOTE
 (1)
: Service Bulletin must be accomplished.
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 1
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 2

@A350
SERVICE BULLETIN
SUMMARY
MATERIAL PRICE INFORMATION
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Kit 52P011D01R00
 1
 50.00
 Cotter Pin
EFFECTIVITY
This Service Bulletin is applicable to this (these) operator(s) :
FIN HVN QTR
CONCURRENT REQUIREMENTS
None
REFERENCES / REPERCUSSIONS
TFU
 52.33.00.012
OEB
 None
AOT
 None
SIL
 None
ISI
 None
LINE MAINTENANCE AFFECTED
 No
LIFE LIMIT
 None
OTHER
 None
NATURE OF THE WORK
AIRCRAFT
 YES
EQUIPMENT
 NO
HARD
 NO
SOFT
 NO
OBRM
 NO
MANPOWER
Task 52P011-832-848-001: Inspection
TOTAL MANHOURS
 18.00
ELAPSED TIME (HOURS)
 9.00
APPENDICES
Appendix 01 - Affected Part Numbers and Serial Numbers
Appendix 02 - Gantt Chart
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 2
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 3

@A350
SERVICE BULLETIN
SUMMARY
**CONF ALL
A
A
Z822
Z821
A
FR26A
FR26
FR25A
FR25
FR24A
FR24
FR23A
FR23FR81A
FR81
FR80A
FR80
FR79A
FR79
FR78A
FR78
FWD
AFT
FWD
AFT
FWD
AFT
FWD
AFT
FWD
AFT
FWD
AFT
FWD
AFT
FWD
AFT
B
TYPICAL
P_SB_52P011_6_SAAA_01_00
Figure A-GSAAA - Sheet 01
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 3
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 4

@A350
SERVICE BULLETIN
SUMMARY
**CONF ALL
B
C
TYPICAL FRAME
C
TYPICAL FRAME FORK
OUTER LOFT
INSPECTION AREA
VIEW LOOKING FORWARD
AFT VIEW SIMILAR
P_SB_52P011_6_SAAA_02_00
Figure A-GSAAA - Sheet 02
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 4
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 5

@A350
SERVICE BULLETIN
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 52
TITLE: DOORS - CARGO - INPECTION OF FWD AND AFT CARGO DOOR
PAINT PEEL OFF ON FRAME FORK
MODIFICATION No.: None
This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the
property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with
any information contained in it. It is delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall not be used for any purpose other than
that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall
not be duplicated in any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the conditions herein), without
AIRBUS prior written consent.
1. PLANNING INFORMATION
**CONF ALL
A. EFFECTIVITY
NOTE
: The MSN’s are given for information, reference should be taken on both PN
and SN listed in Appendix 01 - Affected Part Numbers and Serial Numbers .
(1) Models
350-941
(2) Effectivity by MSN
0006-0020
(3) Effectivity by Operator
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting from transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
OPERATOR
 MSN
FIN
 0018 0019 0020
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 1
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 6

@A350
SERVICE BULLETIN
OPERATOR
 MSN
HVN
 0014 0015 0016 0017
QTR
 0006 0007 0008 0009 0010 0011 0012 0013
(4) Configuration by MSN
MSN
 CONFIGURATION
0006 0007 0008 0009 0010 0011 0012 0013 0014 0015 0016
0017 0018 0019 0020
001
(5) Configuration definition
**CONF 001
Config. 001 is valid for all the aircraft given in the effectivity of this Service Bulletin as a
standard configuration.
(6) Material Effectivity
MATERIAL
 QTY PER A/C
 SEE NOTES
Kit 52P011D01R00
 1
Consumable CMLD01
 1
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
Inspection on structure assembly level revealed that paint peeling might be present on
the forward and aft cargo door frame forks around the hook bolt hole.
(2) Objective/Action
This Mandatory Inspection Service Bulletin requests to perform a one time Detailed
Inspection of the frame forks around the hook bolt hole on the FWD and AFT Cargo
Door and defines corrective actions in case of findings.
(3) Advantages
In case of paint - peeling finding, application of the corrective action will restore the
surface treatment to the required level to tackle corrosion, abrasion effect due to the
environment severity.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to :
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 2
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 7

@A350
SERVICE BULLETIN
Task 52P011-832-848-001: Inspection
(1) Open the Fwd Cargo Door and Identify the Part Number (PN) and Serial Number
(SN)
(2) Do a Detailed Visual Inspection for Paint Peel Off on the FWD Cargo Door
(3) Open the AFT Cargo Door and Identify the Part Number (PN) and Serial Number
(SN)
(4) Do a Detailed Visual Inspection for Paint Peel Off on the AFT Cargo Door
(5) Restore the Anti - Corrosion Protection of the Frame Forks on the FWD Cargo Door
(6) Close the FWD Cargo Door
(7) Restore the Anti - Corrosion Protection of the Frame Forks on the Aft Cargo Door
(8) Close the AFT Cargo Door
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
Accomplishment of this Service Bulletin must be done 3 years from entry into service
(EIS).
This Service Bulletin has been classified Mandatory. It is expected that an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA) will be issued
to confirm this classification. It is anticipated that the AD will confirm the (thresholds
and/or intervals and/or date) given but reference should be made to the AD for
confirmation of the mandated accomplishment timescale.
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organisation Approval No. EASA.21J.031.
If an aircraft listed in the effectivity has a modification or repair embodied that is not of
AIRBUS origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 3
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 8

@A350
SERVICE BULLETIN
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also not
included.
Task 52P011-832-848-001: Inspection
Get Access
 1.00
On Aircraft
Open the Fwd Cargo Door and Identify the Part
Number (PN) and Serial Number (SN)
0.25
Do a Detailed Visual Inspection for Paint Peel Off on
the FWD Cargo Door
3.00
Open the AFT Cargo Door and Identify the Part
Number (PN) and Serial Number (SN)
0.25
Do a Detailed Visual Inspection for Paint Peel Off on
the AFT Cargo Door
3.00
Restore the Anti - Corrosion Protection of the Frame
Forks on the FWD Cargo Door
4.50
Close the FWD Cargo Door
 0.25
Restore the Anti - Corrosion Protection of the Frame
Forks on the Aft Cargo Door
4.50
Close the AFT Cargo Door
 0.25
Close-Up
 1.00
TOTAL MANHOURS
 18.00
ELAPSED TIME (HOURS)
 9.00
NOTE
: For an explanation of the man-hours and elapsed time, refer to the Gantt
Chart, Fig. A-GAAAA
 given in Appendix 02.
NOTE
: The minimum man-hours necessary to accomplish this Service Bulletin are
those for the Inspection. Depending on the inspection result, additional man-
hours can apply.
H. WEIGHT AND BALANCE
Not Changed
I. ELECTRICAL LOAD DATA
Not Changed
J. REFERENCES
Aircraft Structural Repair (ASR)
 51-42-XX 51-75-12
Consumable Material List (CML)
Electrical Standard Practices (ESP)
 20-55-XX
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 4
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 9

@A350
SERVICE BULLETIN
Maintenance Procedure (MP)
 20-51-50 24-41-XX 52-33-71
52-33-72 52-3X-XX
Non Destructive Test (NDT)
 51-99-XX
Process and Material Specification (PMS)
 Process and Material Specification
(PMS) 01-02-14
Process and Material Specification
(PMS) 01-02-61
Process and Material Specification
(PMS) 01-02-63
Process and Material Specification
(PMS) 02-16-00
System Description (SD)
 06-2X-XX 06-3X-XX 06-4X-XX
Standards Manual (SM)
K. PUBLICATION AFFECTED
None
L. INTERCHANGEABILITY/MIXABILITY
Not Applicable
M. SPARES
None
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 5
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 10

@A350
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 6
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 11

@A350
SERVICE BULLETIN
2. MATERIAL INFORMATION
**CONF ALL
A. MATERIAL - PRICE AND AVAILABILITY
(1) Procurement Addresses
Customers with aircraft shown in the effectivity of this Service Bulletin should send a
purchase order to AIRBUS. Quote the number of this Service Bulletin. The address is:
Kit 52P011D01R00
 AIRBUS Material, Logistics and Suppliers
ATP II B,
Hein-Sass-Weg 24
21129 HAMBURG
GERMANY
For ordering by internet:
http://spares.airbus.com
For ordering by E-mail: airbus.kit@airbus.com
Telephone Hotline:
A350/A380: +49 40 743 51775
(2) Price and Availability
Kit 52P011D01R00
Cost
 50.00 USD
Availability
 90 calendar days from receipt of order
The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning schedule
with your order so that we can try to comply with your requirements.
The sales terms (costs and availability) are estimated in relation to economic conditions.
The latest valid price and lead time for ordering purposes shall be obtained through the
AirbusSpares portal or through a request for quotation to airbus.kit@airbus.com.
B. INDUSTRY SUPPORT INFORMATION
AIRBUS will credit the man-hours indicated in this Service Bulletin for inspections that are
performed on aircraft in warranty at the time of such inspection. Credit will be at the agreed
in-house warranty labor rate. Claims for labor allowance should be received no later than 90
days after completion of the last affected warranted aircraft.
For those aircraft in warranty at the time of such inspection with findings further to inspection
as per this Service Bulletin, Airbus will credit the man-hours indicated in this Service Bulletin
for corrections that are performed on aircraft in warranty at the time of such correction. Credit
will be at the agreed in-house warranty labor rate. Claims for labor allowance should be
received no later than 90 days after completion of the last affected warranted aircraft.
For those aircraft in warranty at the time of such inspection with findings further to inspection
as per this Service Bulletin, AIRBUS will share the costs of accomplishment of this Service
Bulletin by providing the kits at no charge for orders placed before Apr 30/19.
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 7
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 12

@A350
SERVICE BULLETIN
This Service Bulletin is the subject of an AIRBUS monitored retrofit campaign.
For the organisation of this retrofit, you are kindly requested to contact AIRBUS retrofit
management department.
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
France
E-mail : monitored.retrofit@airbus.com
C. LIST OF COMPONENTS
Kit 52P011D01R00
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 ITEM
 OLD PART N˚
 INT
 SEE
NOTES
1
 MS24665-376
 8
 PIN
2
 MS24665-372
 8
 PIN
NOTE
: If you find part numbers of hardware components in the related kit(s) which
you cannot identify in the LIST OF COMPONENTS of this Service Bulletin,
refer to Standards Manual (SM). The SM will give you the correct part number
to part number relationship.
D. LIST OF MATERIALS - OPERATOR SUPPLIED
(1) Consumable Materials
Consumable CMLD01
ITEM
 DESCRIPTION
 REFERENCE TO CML
MAT. No.
QTY PER A/C
 SEE
NOTES
Primer Polyurethane Paint -
Corrosion Inhibiting
04EAC2
 As required
Top Coat Polyurethane - Grey
Internal Structure
04JME4
 As required
Varnish Polyurethane - Internal
Structure
04SMM4
 As required
Polysulfide Sealant - General
Purpose Fillet
06AAB1
 As required
Surface Pretreatment-Light Alloys
Chemical Conver
10ABC1
 As required
Surface Pretreatment-Light Alloys
Chemical Conver
10ABE1
 As required
Corrosion Preventive Compound -
Water Displacing So
12ABC1
 As required
(2) Components
None
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 8
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 13

@A350
SERVICE BULLETIN
(3) Equipment
None
E. PARTS TO BE RE-IDENTIFIED BY OPERATOR
None
F. TOOLING
None
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 9
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 14

@A350
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 10
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 15

@A350
SERVICE BULLETIN
3. ACCOMPLISHMENT INSTRUCTIONS
Task 52P011-832-848-001 - Inspection
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC; AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESP A350-A-20-55-
XX-01ZZZ-042Z-A.
NOTE
: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
’refer to’ are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words ’in
accordance with’ are used then the given procedure must be followed.
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE
: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE
: The purpose of flowcharts is to supplement the information given in the Procedure
and Compliance paragraphs and not to serve as the primary source for tasks or
compliance times given in this Service Bulletin.
NOTE
: This Service Bulletin is classified mandatory or expected to be classified mandatory
by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.D. in these
accomplishment instructions are Required for Compliance (RC) and must be done
to comply with the AD. Other paragraphs are recommended and may be deviated
from, done as part of other actions or done with accepted methods different from
those given in the Service Bulletin, as long as the RC paragraphs can be done and
the aircraft can be put back into a serviceable condition.
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 11
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 16

@A350
SERVICE BULLETIN
NOTE
: This Service Bulletin contains the instructions for the on-aircraft maintenance
necessary to ensure the continued airworthiness of the aircraft. For any deviations
to the instructions contained herein, contact Airbus for further instructions and
approval.
NOTE
: Discarded parts must be managed at the operator’s discretion.
Task Associated Data
Zone
821 822
Manpower
TOTAL MANHOURS
 18.00
ELAPSED TIME (HOURS)
 9.00
A. GENERAL
(1) Subtask 52P011-910-201-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Structural Repair (ASR)
 Task A350-A-51-42-XX-01ZZZ-667Z-A
Task A350-A-51-75-12-00ZZZ-660Z-A
Consumable Material List (CML)
Maintenance Procedure (MP)
 Task A350-A-20-51-50-01ZZZ-25BZ-A
System Description (SD)
 Task A350-A-06-2X-XX-01ZZZ-04CZ-A
Task A350-A-06-3X-XX-01ZZZ-04CZ-A
Task A350-A-06-4X-XX-01ZZZ-04CZ-A
(a) If you find process and material specifications that you do not know in the design
drawings, refer to the cross-reference list in the Process and Material Specification
(PMS).
(b) For the specification of materials (Mat. No.) given in this Service Bulletin, refer to
the Consumable Materials List (CML).
(c) Tag all the parts you must remove and retain to make the subsequent installation
easier.
(d) Put all the retained hardware in identified plastic bags and attach the bags to the
related unit.
(e) For Standard Mechanical Torques, refer to MP Task A350-
A-20-51-50-01ZZZ-25BZ-A.
(f) Remove and install fasteners in accordance with ASR Task A350-A-51-42-
XX-01ZZZ-667Z-A.
(g) Repair the paint coating in accordance with ASR Task A350-
A-51-75-12-00ZZZ-660Z-A.
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 12
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 17

@A350
SERVICE BULLETIN
(h) For the Frame (FR) identification, re fer to SD Task A350-A-06-2X-XX-01ZZZ-04CZ-
A.
(i) For the identification of zones, refer to SD Task A350-A-06-3X-XX-01ZZZ-04CZ-A.
(j) For the identification of access panels, refer to SD Task A350-A-06-4X-
XX-01ZZZ-04CZ-A.
B. PREPARATION
(1) Subtask 52P011-941-201-001 - Job Set-up
Manpower Resources
Skills
 NON SPECIFIC
References
Maintenance Procedure (MP)
 Task A350-A-24-41-XX-00ZZZ-170Z-A
NOTE
: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
- Aircraft on the ground resting on landing gear (the ground safety
locks and the wheel chocks are in position on the landing gear)
- Engine shut down, thrust reversers closed and locked
- Aircraft in clean configuration
- Parking brake applied
- Aircraft electrical network de-energized
- Hydraulic system s depressurized
- Access to the cockpit and cabin is available
- All circuit breakers are in closed position
- All controls in NORM, AUTO or OFF position.
(a) Make sure that the aircraft is electrically grounded, refer to MP Task A350-A-24-41-
XX-00ZZZ-170Z-A.
(b) Put an access platform in position under the FWD Cargo Door zone 821 and AFT
Cargo Door zone 822.
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 13
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 18

@A350
SERVICE BULLETIN
C. PROCEDURE
(1) Subtask 52P011-010-201-001 - Open the Fwd Cargo Door and Identify the Part
Number (PN) and Serial Number (SN)
Work Zones and Access Panels
Zone
 Access/Work location
821
Manpower Resources
Manhours
 0.25
Minimum number of person
 1
Subtask elapsed time
 0.25
Skills
 AIRFRAME
References
Maintenance Procedure (MP)
 Task A350-A-52-33-71-A1ZZZ-520Z-A
Task A350-A-52-3X-XX-00ZZZ-132Z-A
Task A350-A-52-3X-XX-02ZZZ-132Z-A
Task A350-A-52-3X-XX-09ZZZ-132Z-A
Fig. A-GFAAA
Flowchart
Sheet 01
NOTE
: To aid in the decision process of this Service Bulletin, refer to Fig. A-
GFAAA
.
(a) Do not open the FWD Cargo Door in its full open position, refer to MP Task A350-
A-52-3X-XX-00ZZZ-132Z-A or MP Task A350-A-52-3X-XX-02ZZZ-132Z-A or MP
Task A350-A-52-3X-XX-09ZZZ-132Z-A.
NOTE
: The FWD Cargo Door is required to be opened in the vertical
position to perform the inspection procedure.
(b) Identify the part number and serial number located on the FWD edge of the cargo
door.
(c) Determine if the part number and serial number are affected, refer to Appendix 01 -
Affected Part Numbers and Serial Numbers .
1
 If the part number and serial number are not affected, proceed to SUBTASK
52P011-410-201 001 Close the FWD Cargo Door .
2
 If the part number and serial number are affected,
a
 Remove the access panels 821AR and 821BR on the FWD Cargo Door,
refer to MP Task A350-A-52-33-71-A1ZZZ-520Z-A.
b
 Proceed to SUBTASK 52P011-210-201 001 Do a Detailed Visual
Inspection for Paint Peel Off on the FWD Cargo Door .
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 14
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 19

@A350
SERVICE BULLETIN
(2) Subtask 52P011-210-201-001 - Do a Detailed Visual Inspection for Paint Peel Off on
the FWD Cargo Door
Work Zones and Access Panels
Zone
 Access/Work location
821
Manpower Resources
Manhours
 3.00
Minimum number of person
 1
Subtask elapsed time
 3.00
Skills
 AIRFRAME
Material necessary to do the job
Kit 52P011D01R00
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 MS24665-376
 4
 PIN
2
 MS24665-372
 4
 PIN
Consumable CMLD01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Corrosion Preventive
Compound - Water
Displacing So
12ABC1
 As required
References
Aircraft Structural Repair (ASR)
 Task A350-A-51-42-XX-01ZZZ-667Z-A
Non Destructive Test (NDT)
 Task A350-A-51-99-XX-01ZZZ-040Z-A
Process and Material Specification
(PMS)
Process and Material Specification (PMS)
01-02-14
Process and Material Specification (PMS)
02-16-00
Fig. A-GBBAA
Inspection of the Hook Bolt Holes on the
Frame Forks
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Fig. A-GFAAA
Flowchart
Sheet 01
Fig. A-GBAAA
Remove the Hook Bolts
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Fig. A-GBCAA
Install the Hook Bolts
Sheet 01
Sheet 02
Sheet 03
Sheet 04
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 15
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 20

@A350
SERVICE BULLETIN
NOTE
: To aid in the decision process of this Service Bulletin, refer to Fig. A-
GFAAA
.
(a) With the Cargo Door partially opened in the vertical position, override the interlock
and put in the latched position.
(b) Put a warning notice in position on the Cargo Door to prevent closing while the
interlock is set to the latched position.
(c) Remove from the Hooks and Frame Forks located at Frame 23 and Frame 26A
in accordance with ASR Task A350- A-51-42-XX-01ZZZ-667Z-A. Refer to Fig. A-
GBAAA Sheet 01
 and Fig. A-GBAAA Sheet 02
 :
2 Pin-Cotter Item (1) Discard
2 Nut Item (7) Retain
2 Washer Item (6) Retain
2 Hook Bolt Item (3) Retain
1
 Rotate the Hook about the Connecting link attachment to clear the bolt hole in
the Frame Fork and remove from the Frame Fork, refer to Fig. A-GBAAA
Sheet 01
 and Fig. A-GBAAA Sheet 02
 :
2 Headed Bushing Item (5) Retain
(d) Remove from the Hooks and the Frame Forks located at Frame 23A and Frame 26
in accordance with ASR Task A350- A-51-42-XX-01ZZZ-667Z-A. Refer to Fig. A-
GBAAA Sheet 01
 and Fig. A-GBAAA Sheet 03
 :
2 Pin-Cotter Item (1) Discard
2 Nut Item (7) Retain
2 Washer Item (6) Retain
2 Hook Bolt Item (8) Retain
1
 Rotate the Hook about the Connecting link attachment to clear the bolt hole in
the Frame Fork and remove from the Frame Fork, refer to Fig. A-GBAAA
Sheet 01
 and Fig. A-GBAAA Sheet 03
 :
2 Headed Bushing Item (10) Retain
(e) Remove from the Hooks and the Frame Forks located at Frame 24, Frame
24A, Frame 25, and Frame 25A in accordance with ASR Task A350-A-51-42-
XX-01ZZZ-667Z-A. Refer to Fig. A-GBAAA Sheet 01
 and Fig. A-GBAAA Sheet 04
 :
4 Pin-Cotter Item (2) Discard
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 16
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 21

@A350
SERVICE BULLETIN
4 Nut Item (15) Retain
4 Washer Item (14) Retain
4 Hook Bolt Item (11) Retain
1
 Rotate the Hook about the Connecting link attachment to clear the bolt hole in
the Frame Fork and remove from the Frame Fork, refer to Fig. A-GBAAA
Sheet 01
 and Fig. A-GBAAA Sheet 04
 :
4 Headed Bushing Item (13) Retain
(f) Do a tape test with dry adhesion without the cross cut around the hook bolt hole
area of both the FWD and AFT sides of each Frame Fork, refer to Process and
Material Specification (PMS) 01-02-14 and Fig. A-GBBAA
.
(g) Do a detailed visual inspection for paint peel off of the hook bolt hole area of both
the FWD and AFT sides of each Frame Fork in accordance with NDT Task A350-
A-51-99-XX-01ZZZ-040Z-A. Refer to Fig. A-GBBAA
.
NOTE
: If paint peel off is found or suspected continuing behind the flange
of the press fit headed bushing on the AFT face of the FWD Fork,
contact AIRBUS for further assessment and to determine if the
headed bushing needs replaced.
1
 If no paint peel off is found around the bolt hole area:
a
 Install in the Frame Fork, refer to Fig. A-GBCAA Sheet 01
 and Fig. A-
GBCAA Sheet 02
:
2 Headed Bushing Item (5) Retained at
removal
b
 Put the Hook in position and install in the Hooks and Frame Forks
located at Frame 23 and Frame 26A in accordance with ASR Task A350-
A-51-42-XX-01ZZZ-667Z-A. Refer to Fig. A-GBCAA Sheet 01
 and Fig. A-
GBCAA Sheet 02
:
2 Hook Bolt Item (3) Retained at
removal
2 Washer Item (6) Retained at
removal
2 Nut Item (7) Retained at
removal
NOTE
: Ensure that the Headed Bushings and the Sleeve are still
in position in the Hook Bolt Hole prior to inserting the
Hook Bolt item (3).
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 17
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 22

@A350
SERVICE BULLETIN
<1> Torque the nut between 4.0 - 5.0 daNm (29.5 - 36.88 lb.ft) and
install, refer to Fig. A-GBCAA Sheet 01
 and Fig. A-GBCAA Sheet
02
:
2 Pin MS24665-376 Item 1
c
 Install in the Frame Fork, refer to Fig. A-GBCAA Sheet 01
 and Fig. A-
GBCAA Sheet 03
:
2 Headed Bushing Item (10) Retained at
removal
d
 Put the Hook in position and install in the Hooks and the Frame Forks
located at Frame 23A and Frame 26 in accordance with ASR Task A350-
A-51-42-XX-01ZZZ-667Z-A. Refer to Fig. A-GBCAA Sheet 01
 and Fig. A-
GBCAA Sheet 03
:
2 Hook Bolt Item (8) Retained at
removal
2 Washer Item (6) Retained at
removal
2 Nut Item (7) Retained at
removal
NOTE
: Ensure that the Headed Bushings and the Sleeve are still
in position in the Hook Bolt Hole prior to inserting the
Hook Bolt item (8).
<1> Torque the nut between 4.0 - 5.0 daNm (29.5 - 36.88 lb.ft) and
install, refer to Fig. A-GBCAA Sheet 01
 and Fig. A-GBCAA Sheet
03
:
2 Pin MS24665-376 Item 1
e
 Install in the Frame Fork, refer to Fig. A-GBCAA Sheet 01
 and Fig. A-
GBCAA Sheet 04
:
4 Headed Bushing Item (13) Retained at
removal
f
 Put the Hook in position and install in the Hooks and the Frame
Forks located at Frame 24, Frame 24A, Frame 25, and Frame 25A in
accordance with ASR Task A350-A- 51-42-XX-01ZZZ-667Z-A. Refer to
Fig. A-GBCAA Sheet 01
 and Fig. A-GBCAA Sheet 04
 :
4 Hook Bolt Item (11) Retained at
removal
4 Washer Item (14) Retained at
removal
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 18
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 23

@A350
SERVICE BULLETIN
4 Nut Item (15) Retained at
removal
NOTE
: Ensure that the Headed Bushings and the Sleeve are still
in position in the Hook Bolt Hole prior to inserting the
Hook Bolt item (11).
<1> Torque the nut between 3.0 - 4.0 daNm (22.13 - 29.5 lb.ft) and
install, refer to Fig. A-GBCAA Sheet 01
 and Fig. A-GBCAA Sheet
04
:
4 Pin MS24665-372 Item 2
g
 If necessary, apply to the moving parts, refer to Process and Material
Specification (PMS) 02-16-00:
Corrosion
Preventive
Compound - Water
Displacing So
12ABC1 As required
h
 Override the interlock to put back into the unlatched position.
i
 Remove the warning notices from the FWD Cargo Door and proceed to
SUBTASK 52P011-410-201 001 Close the FWD Cargo Door .
2
 If paint peel off is found around the bolt hole area, repair as written in
SUBTASK 52P011-370-201 001 Restore the Anti - Corrosion Protection of the
Frame Forks on the FWD Cargo Door .
(3) Subtask 52P011-010-202-001 - Open the AFT Cargo Door and Identify the Part
Number (PN) and Serial Number (SN)
Work Zones and Access Panels
Zone
 Access/Work location
822
Manpower Resources
Manhours
 0.25
Minimum number of person
 1
Subtask elapsed time
 0.25
Skills
 AIRFRAME
References
Maintenance Procedure (MP)
 Task A350-A-52-33-72-A1ZZZ-520Z-A
Task A350-A-52-3X-XX-00ZZZ-132Z-A
Task A350-A-52-3X-XX-02ZZZ-132Z-A
Task A350-A-52-3X-XX-09ZZZ-132Z-A
Fig. A-GFAAA
Flowchart
Sheet 01
NOTE
: To aid in the decision process of this Service Bulletin, refer to Fig. A-
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 19
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 24

@A350
SERVICE BULLETIN
GFAAA
.
(a) Do not open the AFT Cargo Door in its full open position, refer to MP Task A350-
A-52-3X-XX-00ZZZ-132Z-A or MP Task A350-A-52-3X-XX-02ZZZ-132Z-A or MP
Task A350-A-52-3X-XX-09ZZZ-132Z-A.
NOTE
: The AFT Cargo Door is required to be opened in the vertical
position to perform the inspection procedure.
(b) Identify the part number and serial number located on the FWD edge of the cargo
door.
(c) Determine if the part number and serial number are affected, refer to Appendix 01 -
Affected Part Numbers and Serial Numbers .
1
 If the part number and serial number are not affected, proceed to SUBTASK
52P011-410-202 001 Close the AFT Cargo Door .
2
 If the part number and serial number are affected:
a
 Remove the access panels 822AR and 822BR on the AFT Cargo Door,
refer to MP Task A350-A-52-33-72-A1ZZZ-520Z-A.
b
 Proceed to SUBTASK 52P011-210-202 001 Do a Detailed Visual
Inspection for Paint Peel Off on the AFT Cargo Door .
(4) Subtask 52P011-210-202-001 - Do a Detailed Visual Inspection for Paint Peel Off on
the AFT Cargo Door
Work Zones and Access Panels
Zone
 Access/Work location
822
Manpower Resources
Manhours
 3.00
Minimum number of person
 1
Subtask elapsed time
 3.00
Skills
 AIRFRAME
Material necessary to do the job
Kit 52P011D01R00
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 MS24665-376
 4
 PIN
2
 MS24665-372
 4
 PIN
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 20
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 25

@A350
SERVICE BULLETIN
Consumable CMLD01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Corrosion Preventive
Compound - Water
Displacing So
12ABC1
 As required
References
Aircraft Structural Repair (ASR)
 Task A350-A-51-42-XX-01ZZZ-667Z-A
Non Destructive Test (NDT)
 Task A350-A-51-99-XX-01ZZZ-040Z-A
Process and Material Specification
(PMS)
Process and Material Specification (PMS)
01-02-14
Process and Material Specification (PMS)
02-16-00
Fig. A-GBAAA
Remove the Hook Bolts
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Fig. A-GBBAA
Inspection of the Hook Bolt Holes on the
Frame Forks
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Fig. A-GBCAA
Install the Hook Bolts
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Fig. A-GFAAA
Flowchart
Sheet 01
NOTE
: To aid in the decision process of this Service Bulletin, refer to Fig. A-
GFAAA
.
(a) With the Cargo Door partially opened in the vertical position, override the interlock
and put in the latched position.
(b) Put a warning notice in position on the Cargo Door to prevent closing while the
interlock is set to the latched position.
(c) Remove from the Hooks and Frame Forks located at Frame 78 and Frame 81A
in accordance with ASR Task A350- A-51-42-XX-01ZZZ-667Z-A. Refer to Fig. A-
GBAAA Sheet 01
 and Fig. A-GBAAA Sheet 02
 :
2 Pin-Cotter Item (1) Discard
2 Nut Item (7) Retain
2 Washer Item (6) Retain
2 Hook Bolt Item (3) Retain
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 21
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 26

@A350
SERVICE BULLETIN
1
 Rotate the Hook about the Connecting link attachment to clear the bolt hole in
the Frame Fork and remove from the Frame Fork, refer to Fig. A-GBAAA
Sheet 01
 and Fig. A-GBAAA Sheet 02
 :
2 Headed Bushing Item (5) Retain
(d) Remove from the Hooks and the Frame Forks located at Frame 78A and Frame 81
in accordance with ASR Task A350- A-51-42-XX-01ZZZ-667Z-A. Refer to Fig. A-
GBAAA Sheet 01
 and Fig. A-GBAAA Sheet 03
 :
2 Pin-Cotter Item (1) Discard
2 Nut Item (7) Retain
2 Washer Item (6) Retain
2 Hook Bolt Item (8) Retain
1
 Rotate the Hook about the Connecting link attachment to clear the bolt hole in
the Frame Fork and remove from the Frame Fork, refer to Fig. A-GBAAA
Sheet 01
 and Fig. A-GBAAA Sheet 03
 :
2 Headed Bushing Item (10) Retain
(e) Remove from the Hooks and the Frame Forks located at Frame 79, Frame
79A, Frame 80, and Frame 80A in accordance with ASR Task A350-A-51-42-
XX-01ZZZ-667Z-A. Refer to Fig. A-GBAAA Sheet 01
 and Fig. A-GBAAA Sheet 04
 :
4 Pin-Cotter Item (2) Discard
4 Nut Item (15) Retain
4 Washer Item (14) Retain
4 Hook Bolt Item (11) Retain
1
 Rotate the Hook about the Connecting link attachment to clear the bolt hole in
the Frame Fork and remove from the Frame Fork, refer to Fig. A-GBAAA
Sheet 01
 and Fig. A-GBAAA Sheet 04
 :
4 Headed Bushing Item (13) Retain
(f) Do a tape test with dry adhesion without the cross cut around the hook bolt hole
area of both the FWD and AFT sides of each Frame Fork, refer to Process and
Material Specification (PMS) 01-02-14 and Fig. A-GBBAA
.
(g) Do a detailed visual inspection for paint peel off of the hook bolt hole area of both
the FWD and AFT sides of each Frame Fork in accordance with NDT Task A350-
A-51-99-XX-01ZZZ-040Z-A. Refer to Fig. A-GBBAA
.
NOTE
: If paint peel off is found or suspected continuing behind the flange
of the press fit headed bushing on the AFT face of the FWD Fork,
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 22
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 27

@A350
SERVICE BULLETIN
contact AIRBUS for further assessment and to determine if the
headed bushing needs replaced.
1
 If no paint peel off is found around the bolt hole area:
a
 Install in the Frame Fork, refer to Fig. A-GBCAA Sheet 01
 and Fig. A-
GBCAA Sheet 02
:
2 Headed Bushing Item (5) Retained at
removal
b
 Put the Hook in position and install in the Hooks and Frame Forks
located at Frame 78 and Frame 81A in accordance with ASR Task A350-
A-51-42-XX-01ZZZ-667Z-A. Refer to Fig. A-GBCAA Sheet 01
 and Fig. A-
GBCAA Sheet 02
:
2 Hook Bolt Item (3) Retained at
removal
2 Washer Item (6) Retained at
removal
2 Nut Item (7) Retained at
removal
NOTE
: Ensure that the Headed Bushings and the Sleeve are still
in position in the Hook Bolt Hole prior to inserting the
Hook Bolt item (3).
<1> Torque the nut between 4.0 - 5.0 daNm (29.5 - 36.88 lb.ft) and
install, refer to Fig. A-GBCAA Sheet 01
 and Fig. A-GBCAA Sheet
02
:
2 Pin MS24665-376 Item 1
c
 Install in the Frame Fork, refer to Fig. A-GBCAA Sheet 01
 and Fig. A-
GBCAA Sheet 03
:
2 Headed Bushing Item (10) Retained at
removal
d
 Put the Hook in position and install in the Hooks and the Frame Forks
located at Frame 78A and Frame 81 in accordance with ASR Task A350-
A-51-42-XX-01ZZZ-667Z-A. Refer to Fig. A-GBCAA Sheet 01
 and Fig. A-
GBCAA Sheet 03
:
2 Hook Bolt Item (8) Retained at
removal
2 Washer Item (6) Retained at
removal
2 Nut Item (7) Retained at
removal
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 23
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 28

@A350
SERVICE BULLETIN
NOTE
: Ensure that the Headed Bushings and the Sleeve are still
in position in the Hook Bolt Hole prior to inserting the
Hook Bolt item (8).
<1> Torque the nut between 4.0 - 5.0 daNm (29.5 - 36.88 lb.ft) and
install, refer to Fig. A-GBCAA Sheet 01
 and Fig. A-GBCAA Sheet
03
:
2 Pin MS24665-376 Item 1
e
 Install in the Frame Fork, refer to Fig. A-GBCAA Sheet 01
 and Fig. A-
GBCAA Sheet 04
:
4 Headed Bushing Item (13) Retained at
removal
f
 Put the Hook in position and install in the Hooks and the Frame
Forks located at Frame 79, Frame 79A, Frame 80, and Frame 80A in
accordance with ASR Task A350-A- 51-42-XX-01ZZZ-667Z-A. Refer to
Fig. A-GBCAA Sheet 01
 and Fig. A-GBCAA Sheet 04
 :
4 Hook Bolt Item (11) Retained at
removal
4 Washer Item (14) Retained at
removal
4 Nut Item (15) Retained at
removal
NOTE
: Ensure that the Headed Bushings and the Sleeve are still
in position in the Hook Bolt Hole prior to inserting the
Hook Bolt item (11).
<1> Torque the nut between 3.0 - 4.0 daNm (22.13 - 29.5 lb.ft) and
install, refer to Fig. A-GBCAA Sheet 01
 and Fig. A-GBCAA Sheet
04
:
4 Pin MS24665-372 Item 2
g
 If necessary, apply to the moving parts, refer to Process and Material
Specification (PMS) 02-16-00:
Corrosion
Preventive
Compound - Water
Displacing So
12ABC1 As required
h
 Override the interlock to put back into the unlatched position.
i
 Remove the warning notices from the AFT Cargo Door and proceed to
SUBTASK 52P011-410-202 001 Close the AFT Cargo Door .
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 24
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 29

@A350
SERVICE BULLETIN
2
 If paint peel off is found around the bolt hole area, repair as written in
SUBTASK 52P011-370-202 001 Restore the Anti - Corrosion Protection of the
Frame Forks on the Aft Cargo Door .
(5) Subtask 52P011-370-201-001 - Restore the Anti - Corrosion Protection of the
Frame Forks on the FWD Cargo Door
Work Zones and Access Panels
Zone
 Access/Work location
821
Manpower Resources
Manhours
 4.50
Minimum number of person
 1
Subtask elapsed time
 4.50
Skills
 AIRFRAME
Material necessary to do the job
Kit 52P011D01R00
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 MS24665-376
 4
 PIN
2
 MS24665-372
 4
 PIN
Consumable CMLD01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Primer Polyurethane Paint -
Corrosion Inhibiting
04EAC2
Top Coat Polyurethane -
Grey Internal Structure
04JME4
 As required
Varnish Polyurethane -
Internal Structure
04SMM4
 As required
Polysulfide Sealant -
General Purpose Fillet
06AAB1
 As required
Surface Pretreatment-Light
Alloys Chemical Conver
10ABC1
 As required
Surface Pretreatment-Light
Alloys Chemical Conver
10ABE1
 As required
Corrosion Preventive
Compound - Water
Displacing So
12ABC1
 As required
References
Aircraft Structural Repair (ASR)
 Task A350-A-51-42-XX-01ZZZ-667Z-A
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 25
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 30

@A350
SERVICE BULLETIN
References
Process and Material Specification
(PMS)
Process and Material Specification (PMS)
01-02-14
Process and Material Specification (PMS)
01-02-61
Process and Material Specification (PMS)
01-02-63
Process and Material Specification (PMS)
02-16-00
Fig. A-GBBAA
Inspection of the Hook Bolt Holes on the
Frame Forks
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Fig. A-GBCAA
Install the Hook Bolts
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Fig. A-GFAAA
Flowchart
Sheet 01
NOTE
: To aid in the decision process of this Service Bulletin, refer to Fig. A-
GFAAA
.
(a) If necessary, remove the fillet sealant.
(b)
CAUTION
: Ensure that the masking materials used do not cause any damage
to the final quality of the part.
Mask all the surrounding areas that are not to be repaired and painted.
(c) Remove the existing exposed paints, chemical conversion coating, and tartaric
sulfuric anodizing layer of the paint peel off area on the Frame Forks, refer to
Process and Material Specification (PMS) 01-02-63, appendix 4 and Fig. A-GBBAA
.
1
 Remove with an overlap of 15mm (0.59 in.).
2
 The adjacent areas to the repair area must be softly ground for adhesion
purpose.
NOTE
: Partial overlap to the adjacent area is allowed.
(d) Clean to remove all contamination/dust from the area.
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 26
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 31

@A350
SERVICE BULLETIN
(e) Apply the chemical conversion coating on the repair area by brush or by Alodine
pen, refer to Process and Material Specification (PMS) 01-02-61.
1
 For brush application:
a
 Apply to a cloth and then wet:
Surface
Pretreatment-Light
Alloys Chemical
Conver
10ABC1 As required
b
 Place the cloth on the repair area and further wet by a brush.
c
 Allow the cloth to remain on the repair area for a maximum of 3 minutes.
d
 Remove the cloth.
e
 Rinse area with deionized water.
2
 For pen application apply:
Surface
Pretreatment-Light
Alloys Chemical
Conver
10ABE1 As required
(f) Clean and allow area to dry and then apply, refer to Process and Material
Specification (PMS) 01-02-14:
Primer
Polyurethane Paint
- Corrosion
Inhibiting
04EAC2 As required
and:
Top Coat
Polyurethane - Grey
Internal Structure
04JME4 As required
(g) Apply in the area that was removed:
Polysulfide Sealant
- General Purpose
Fillet
06AAB1 As required
and:
Varnish
Polyurethane -
Internal Structure
04SMM4 As required
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 27
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 32

@A350
SERVICE BULLETIN
(h) Install in the Frame Fork, refer to Fig. A-GBCAA Sheet 01
 and Fig. A-GBCAA
Sheet 02
:
2 Headed Bushing Item (5) Retained at
removal
(i) Put the Hook in position and install in the Hooks and Frame Forks located at Frame
23 and Frame 26A in accordance with ASR Task A350-A-51-42-XX-01ZZZ-667Z-A.
Refer to Fig. A-GBCAA Sheet 01
 and Fig. A-GBCAA Sheet 02
 :
2 Hook Bolt Item (3) Retained at
removal
2 Washer Item (6) Retained at
removal
2 Nut Item (7) Retained at
removal
NOTE
: Ensure that the Headed Bushings and the Sleeve are still in
position in the Hook Bolt Hole prior to inserting the Hook Bolt item
(3).
1
 Torque the nut between 4.0 - 5.0 daNm (29.5 - 36.88 lb.ft) and install, refer to
Fig. A-GBCAA Sheet 01
 and Fig. A-GBCAA Sheet 02
 :
2 Pin MS24665-376 Item 1
(j) Install in the Frame Fork, refer to Fig. A-GBCAA Sheet 01
 and Fig. A-GBCAA
Sheet 03
:
2 Headed Bushing Item (10) Retained at
removal
(k) Put the Hook in position and install in the Hooks and the Frame Forks located
at Frame 23A and Frame 26 in accordance with ASR Task A350-A-51-42-
XX-01ZZZ-667Z-A. Refer to Fig. A-GBCAA Sheet 01
 and Fig. A-GBCAA Sheet 03
 :
2 Hook Bolt Item (8) Retained at
removal
2 Washer Item (6) Retained at
removal
2 Nut Item (7) Retained at
removal
NOTE
: Ensure that the Headed Bushings and the Sleeve are still in
position in the Hook Bolt Hole prior to inserting the Hook Bolt item
(8).
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 28
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 33

@A350
SERVICE BULLETIN
1
 Torque the nut between 4.0 - 5.0 daNm (29.5 - 36.88 lb.ft) and install, refer to
Fig. A-GBCAA Sheet 01
 and Fig. A-GBCAA Sheet 03
 :
2 Pin MS24665-376 Item 1
(l) Install in the Frame Fork, refer to Fig. A-GBCAA Sheet 01
 and Fig. A-GBCAA
Sheet 04
:
4 Headed Bushing Item (13) Retained at
removal
(m) Put the Hook in position and install in the Hooks and the Frame Forks located at
Frame 24, Frame 24A, Frame 25, and Frame 25A in accordance with ASR Task
A350-A-51-42-XX-01ZZZ-667Z-A. Refer to Fig. A-GBCAA Sheet 01
 and Fig. A-
GBCAA Sheet 04
:
4 Hook Bolt Item (11) Retained at
removal
4 Washer Item (14) Retained at
removal
4 Nut Item (15) Retained at
removal
NOTE
: Ensure that the Headed Bushings and the Sleeve are still in
position in the Hook Bolt Hole prior to inserting the Hook Bolt item
(11).
1
 Torque the nut between 3.0 - 4.0 daNm (22.13 - 29.5 lb.ft) and install, refer to
Fig. A-GBCAA Sheet 01
 and Fig. A-GBCAA Sheet 04
 :
4 Pin MS24665-372 Item 2
(n) Apply to the moving parts, refer to Process and Material Specification (PMS)
02-16-00:
Corrosion
Preventive
Compound - Water
Displacing So
12ABC1 As required
(o) Override the interlock to put back into the unlatched position.
(p) Remove the warning notices from the FWD Cargo Door and proceed to SUBTASK
52P011-410-202 001 Close the AFT Cargo Door .
(6) Subtask 52P011-410-201-001 - Close the FWD Cargo Door
Work Zones and Access Panels
Zone
 Access/Work location
821
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 29
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 34

@A350
SERVICE BULLETIN
Manpower Resources
Manhours
 0.25
Minimum number of person
 1
Subtask elapsed time
 0.25
Skills
 AIRFRAME
References
Maintenance Procedure (MP)
 Task A350-A-52-33-71-A1ZZZ-720Z-A
Task A350-A-52-3X-XX-01ZZZ-132Z-A
Task A350-A-52-3X-XX-03ZZZ-132Z-A
Task A350-A-52-3X-XX-09ZZZ-132Z-A
Fig. A-GFAAA
Flowchart
Sheet 01
NOTE
: To aid in the decision process of this Service Bulletin, refer to Fig. A-
GFAAA
.
(a) If removed for the inspection, install the access panels 821AR and 821BR on the
FWD Cargo Door, refer to MP Task A350-A-52-33-71-A1ZZZ-720Z-A.
(b) Close the FWD Cargo Door, refer to MP Task A350-A-52- 3X-XX-01ZZZ-132Z-
A or MP Task A350-A-52-3X-XX-03ZZZ- 132Z-A or MP Task A350-A-52-3X-
XX-09ZZZ-132Z-A)
(7) Subtask 52P011-370-202-001 - Restore the Anti - Corrosion Protection of the
Frame Forks on the Aft Cargo Door
Work Zones and Access Panels
Zone
 Access/Work location
822
Manpower Resources
Manhours
 4.50
Minimum number of person
 1
Subtask elapsed time
 4.50
Skills
 AIRFRAME
Material necessary to do the job
Kit 52P011D01R00
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 MS24665-376
 4
 PIN
2
 MS24665-372
 4
 PIN
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 30
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 35

@A350
SERVICE BULLETIN
Consumable CMLD01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Primer Polyurethane Paint -
Corrosion Inhibiting
04EAC2
 As required
Top Coat Polyurethane -
Grey Internal Structure
04JME4
 As required
Varnish Polyurethane -
Internal Structure
04SMM4
 As required
Polysulfide Sealant -
General Purpose Fillet
06AAB1
 As required
Surface Pretreatment-Light
Alloys Chemical Conver
10ABC1
 As required
Surface Pretreatment-Light
Alloys Chemical Conver
10ABE1
 As required
Corrosion Preventive
Compound - Water
Displacing So
12ABC1
 As required
References
Aircraft Structural Repair (ASR)
 Task A350-A-51-42-XX-01ZZZ-667Z-A
Process and Material Specification
(PMS)
Process and Material Specification (PMS)
01-02-14
Process and Material Specification (PMS)
01-02-61
Process and Material Specification (PMS)
01-02-63
Process and Material Specification (PMS)
02-16-00
Fig. A-GBBAA
Inspection of the Hook Bolt Holes on the
Frame Forks
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Fig. A-GBCAA
Install the Hook Bolts
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Fig. A-GFAAA
Flowchart
Sheet 01
NOTE
: To aid in the decision process of this Service Bulletin, refer to Fig. A-
GFAAA
.
(a) If necessary, remove the fillet sealant.
(b)
CAUTION
: Ensure that the masking materials used do not cause any damage
to the final quality of the part.
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 31
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 36

@A350
SERVICE BULLETIN
Mask all the surrounding areas that are not to be repaired and painted.
(c) Remove the existing exposed paints, chemical conversion coating, and tartaric
sulfuric anodizing layer of the paint peel off area on the Frame Forks, refer to
Process and Material Specification (PMS) 01-02-63, appendix 4 and Fig. A-GBBAA
.
1
 Remove with an overlap of 15mm (0.59 in.).
2
 The adjacent areas to the repair area must be softly ground for adhesion
purpose.
NOTE
: Partial overlap to the adjacent area is allowed.
(d) Clean to remove all contamination/dust from the area.
(e) Apply the chemical conversion coating on the repair area by brush or by Alodine
pen, refer to Process and Material Specification (PMS) 01-02-61.
1
 For brush application:
a
 Apply to a cloth and then wet:
Surface
Pretreatment-Light
Alloys Chemical
Conver
10ABC1 As required
b
 Place the cloth on the repair area and further wet by a brush.
c
 Allow the cloth to remain on the repair area for a maximum of 3 minutes.
d
 Remove the cloth.
e
 Rinse area with deionized water.
2
 For pen application apply:
Surface
Pretreatment-Light
Alloys Chemical
Conver
10ABE1 As required
(f) Clean and allow area to dry and then apply, refer to Process and Material
Specification (PMS) 01-02-14:
Primer
Polyurethane Paint
- Corrosion
Inhibiting
04EAC2 As required
and:
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 32
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 37

@A350
SERVICE BULLETIN
Top Coat
Polyurethane - Grey
Internal Structure
04JME4 As required
(g) Apply in the area that was removed:
Polysulfide Sealant
- General Purpose
Fillet
06AAB1 As required
and:
Varnish
Polyurethane -
Internal Structure
04SMM4 As required
(h) Install in the Frame Fork, refer to Fig. A-GBCAA Sheet 01
 and Fig. A-GBCAA
Sheet 02
:
2 Headed Bushing Item (5) Retained at
removal
(i) Put the Hook in position and install in the Hooks and Frame Forks located at Frame
78 and Frame 81A in accordance with ASR Task A350-A-51-42-XX-01ZZZ-667Z-A.
Refer to Fig. A-GBCAA Sheet 01
 and Fig. A-GBCAA Sheet 02
 :
2 Hook Bolt Item (3) Retained at
removal
2 Washer Item (6) Retained at
removal
2 Nut Item (7) Retained at
removal
NOTE
: Ensure that the Headed Bushings and the Sleeve are still in
position in the Hook Bolt Hole prior to inserting the Hook Bolt item
(3).
1
 Torque the nut between 4.0 - 5.0 daNm (29.5 - 36.88 lb.ft) and install, refer to
Fig. A-GBCAA Sheet 01
 and Fig. A-GBCAA Sheet 02
 :
2 Pin MS24665-376 Item 1
(j) Install in the Frame Fork, refer to Fig. A-GBCAA Sheet 01
 and Fig. A-GBCAA
Sheet 03
:
2 Headed Bushing Item (10) Retained at
removal
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 33
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 38

@A350
SERVICE BULLETIN
(k) Put the Hook in position and install in the Hooks and the Frame Forks located
at Frame 78A and Frame 81 in accordance with ASR Task A350-A-51-42-
XX-01ZZZ-667Z-A. Refer to Fig. A-GBCAA Sheet 01
 and Fig. A-GBCAA Sheet 03
 :
2 Hook Bolt Item (8) Retained at
removal
2 Washer Item (6) Retained at
removal
2 Nut Item (7) Retained at
removal
NOTE
: Ensure that the Headed Bushings and the Sleeve are still in
position in the Hook Bolt Hole prior to inserting the Hook Bolt item
(8).
1
 Torque the nut between 4.0 - 5.0 daNm (29.5 - 36.88 lb.ft) and install, refer to
Fig. A-GBCAA Sheet 01
 and Fig. A-GBCAA Sheet 03
 :
2 Pin MS24665-376 Item 1
(l) Install in the Frame Fork, refer to Fig. A-GBCAA Sheet 01
 and Fig. A-GBCAA
Sheet 04
:
4 Headed Bushing Item (13) Retained at
removal
(m) Put the Hook in position and install in the Hooks and the Frame Forks located at
Frame 79, Frame 79A, Frame 80, and Frame 80A in accordance with ASR Task
A350-A-51-42-XX-01ZZZ-667Z-A. Refer to Fig. A-GBCAA Sheet 01
 and Fig. A-
GBCAA Sheet 04
:
4 Hook Bolt Item (11) Retained at
removal
4 Washer Item (14) Retained at
removal
4 Nut Item (15) Retained at
removal
NOTE
: Ensure that the Headed Bushings and the Sleeve are still in
position in the Hook Bolt Hole prior to inserting the Hook Bolt item
(11).
1
 Torque the nut between 3.0 - 4.0 daNm (22.13 - 29.5 lb.ft) and install, refer to
Fig. A-GBCAA Sheet 01
 and Fig. A-GBCAA Sheet 04
 :
4 Pin MS24665-372 Item 2
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 34
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 39

@A350
SERVICE BULLETIN
(n) Apply to the moving parts, refer to Process and Material Specification (PMS)
02-16-00:
Corrosion
Preventive
Compound - Water
Displacing So
12ABC1 As required
(o) Override the interlock to put back into the unlatched position.
(p) Remove the warning notices from the AFT Cargo Door and proceed to SUBTASK
52P011-410-202 001 Close the AFT Cargo Door .
(8) Subtask 52P011-410-202-001 - Close the AFT Cargo Door
Work Zones and Access Panels
Zone
 Access/Work location
822
Manpower Resources
Manhours
 0.25
Minimum number of person
 1
Subtask elapsed time
 0.25
Skills
 AIRFRAME
References
Maintenance Procedure (MP)
 Task A350-A-52-33-72-A1ZZZ-720Z-A
Task A350-A-52-3X-XX-01ZZZ-132Z-A
Task A350-A-52-3X-XX-03ZZZ-132Z-A
Task A350-A-52-3X-XX-09ZZZ-132Z-A
Fig. A-GFAAA
Flowchart
Sheet 01
NOTE
: To aid in the decision process of this Service Bulletin, refer to Fig. A-
GFAAA
.
(a) If removed for the inspection, install the access panels 822AR and 822BR on the
AFT Cargo Door, refer to MP Task A350-A-52-33-72-A1ZZZ-720Z-A.
(b) Close the AFT Cargo Door, refer to MP Task A350-A-52- 3X-XX-01ZZZ-132Z-
A or MP Task A350-A-52-3X-XX-03ZZZ- 132Z-A or MP Task A350-A-52-3X-
XX-09ZZZ-132Z-A.
D. TEST
None
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 35
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 40

@A350
SERVICE BULLETIN
E. CLOSE-UP
(1) Subtask 52P011-942-201-001 - Close-up
Manpower Resources
Skills
 NON SPECIFIC
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Remove the access platforms from under the FWD Cargo Door zone 821 and the
AFT Cargo Door 822.
(c) Put the aircraft back to its initial configuration.
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 36
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 41

@A350
SERVICE BULLETIN
**CONF ALL
REFER TO THE LIST OF THE AFFECTED P/N AND
S/N IN APPENDIX 01 ON BOTH FWD AND
AFT CARGO DOORS
AFFECTED P/N
AND S/N INSTALLED?
IS THE
DO A DETAILED VISUAL INSPECTION AND TAPE TEST
WITH DRY ADHESION WITHOUT CROSS CUT WITH ACCESS
COVERS AND HOOK BOLTS REMOVED FOR PAINT PEEL
OFF IN FRAME FORK HOOK BOLT AREA
NO NO FURTHERACTION
NOTE:
THE PURPOSE OF FLOWCHARTS IS TO SUPPLEMENT
THE INFORMATION GIVEN IN THE PROCEDURE AND 
COMPLIANCE PARAGRAPHS AND NOT TO SERVE AS
THE PRIMARY SOURCE FOR TASKS OR COMPLIANCE
TIMES GIVEN IN THE SERVICE BULLETIN.
YES
ANY FINDINGS? NO FURTHERACTIONNO
YES
NO FURTHER
ACTION
RESTORE ANTI−CORROSION PROTECTION CCC, PRIMER,
TOP COAT, AND VARNISH
P_SB_52P011_6_FAAA_01_00
Figure A-GFAAA - Sheet 01
Flowchart
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 37
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 42

@A350
SERVICE BULLETIN
**CONF ALL
A
A
Z822
Z821
FR26A
FR81A
FWD
AFT
FR26
FR81
FWD
AFT
FR25A
FR80A
FWD
AFT
FR25
FR80
FWD
AFT
FR24A
FR79A
FWD
AFT
FR24
FR79
FWD
AFT
FR23A
FR78A
FWD
AFT
FR23
FR78
FWD
AFT
A
TYPICAL
FWD
VIEW LOOKING INBOARD
C
C
A
A
E
E
E
E
E
E
E
E
C
C
A
A
P_SB_52P011_6_BAAA_01_00
Figure A-GBAAA - Sheet 01
Remove the Hook Bolts
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 38
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 43

@A350
SERVICE BULLETIN
**CONF ALL
A A
VIEW LOOKING FWD
(1)
(7)
(6) (5) (3)SLEEVE
HEADED
BUSHING
B
B
B B FWD
CONNECTING LINK
AFT FORK FRAME NOT SHOWN
P_SB_52P011_6_BAAA_02_02
Figure A-GBAAA - Sheet 02
Remove the Hook Bolts
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 39
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 44

@A350
SERVICE BULLETIN
**CONF ALL
(1)
(7)
(6) (10) (8)SLEEVE
HEADED
BUSHING
C C
D D
D
DVIEW LOOKING AFT
FWD
CONNECTING LINK
FWD FORK FRAME NOT SHOWN
P_SB_52P011_6_BAAA_03_03
Figure A-GBAAA - Sheet 03
Remove the Hook Bolts
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 40
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 45

@A350
SERVICE BULLETIN
**CONF ALL
F
F
F F
SLEEVE
HEADED
BUSHING
E E
(14)
(15)
(11)
(13)
(2)
FWD
CONNECTING LINK
VIEW LOOKING AFT
FWD FORK FRAME NOT SHOWN
P_SB_52P011_6_BAAA_04_02
Figure A-GBAAA - Sheet 04
Remove the Hook Bolts
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 41
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 46

@A350
SERVICE BULLETIN
**CONF ALL
A
A
Z822
Z821
FR26A
FR81A
FWD
AFT
FR26
FR81
FWD
AFT
FR25A
FR80A
FWD
AFT
FR25
FR80
FWD
AFT
FR24A
FR79A
FWD
AFT
FR24
FR79
FWD
AFT
FR23A
FR78A
FWD
AFT
FR23
FR78
FWD
AFT
A
TYPICAL
FWD
VIEW LOOKING INBOARD
B B B B B B BB
P_SB_52P011_6_BBAA_01_00
Figure A-GBBAA - Sheet 01
Inspection of the Hook Bolt Holes on the Frame Forks
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 42
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 47

@A350
SERVICE BULLETIN
**CONF ALL
A
A
B
B
C
C
D
D
B
TYPICAL
FWD
P_SB_52P011_6_BBAA_02_00
Figure A-GBBAA - Sheet 02
Inspection of the Hook Bolt Holes on the Frame Forks
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 43
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 48

@A350
SERVICE BULLETIN
**CONF ALL
INSPECTION AREA
A A B B
VIEW LOOKING AFT
TYPICAL VIEW
VIEW LOOKING FWD
TYPICAL VIEW
HARDWARE NOT SHOWN HARDWARE NOT SHOWN
P_SB_52P011_6_BBAA_03_00
Figure A-GBBAA - Sheet 03
Inspection of the Hook Bolt Holes on the Frame Forks
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 44
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 49

@A350
SERVICE BULLETIN
**CONF ALL
INSPECTION AREA
C C
VIEW LOOKING AFT
TYPICAL VIEW
D D
VIEW LOOKING FWD
TYPICAL VIEW
HARDWARE NOT SHOWN HARDWARE NOT SHOWN
P_SB_52P011_6_BBAA_04_01
Figure A-GBBAA - Sheet 04
Inspection of the Hook Bolt Holes on the Frame Forks
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 45
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 50

@A350
SERVICE BULLETIN
**CONF ALL
A
A
Z822
Z821
FR26A
FR81A
FWD
AFT
FR26
FR81
FWD
AFT
FR25A
FR80A
FWD
AFT
FR25
FR80
FWD
AFT
FR24A
FR79A
FWD
AFT
FR24
FR79
FWD
AFT
FR23A
FR78A
FWD
AFT
FR23
FR78
FWD
AFT
A
TYPICAL
FWD
VIEW LOOKING INBOARD
C
C
A
A
E
E
E
E
E
E
E
E
C
C
A
A
P_SB_52P011_6_BCAA_01_00
Figure A-GBCAA - Sheet 01
Install the Hook Bolts
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 46
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 51

@A350
SERVICE BULLETIN
**CONF ALL
A A
VIEW LOOKING FWD
1
(7)
(6) (5) (3)SLEEVE
HEADED
BUSHING
B
B
B B FWD
CONNECTING LINK
TORQUE NUT (ITEM 7) TO BETWEEN01
NOTE:
4.0 AND 5.0 daNm (29.5 AND 36.88 lb.ft)
01
AFT FORK FRAME NOT SHOWN
P_SB_52P011_6_BCAA_02_02
Figure A-GBCAA - Sheet 02
Install the Hook Bolts
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 47
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 52

@A350
SERVICE BULLETIN
**CONF ALL
1
(7)
(6) (10) (8)SLEEVE
HEADED
BUSHING
C C
D D
D
D
FWDTORQUE NUT (ITEM 7) TO BETWEEN01
NOTE:
4.0 AND 5.0 daNm (29.5 AND 36.88 lb.ft)
01
CONNECTING LINK
VIEW LOOKING AFT
FWD FORK FRAME NOT SHOWN
P_SB_52P011_6_BCAA_03_02
Figure A-GBCAA - Sheet 03
Install the Hook Bolts
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 48
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 53

@A350
SERVICE BULLETIN
**CONF ALL
F
F
F F
SLEEVE
HEADED
BUSHING
E E
(14)
(15)
(11)
(13)
2
FWD
TORQUE NUT (ITEM 15) TO BETWEEN02
NOTE:
3.0 AND 4.0 daNm (22.13 AND 29.5 lb.ft)
02
CONNECTING LINK
VIEW LOOKING AFT
FWD FORK FRAME NOT SHOWN
P_SB_52P011_6_BCAA_04_02
Figure A-GBCAA - Sheet 04
Install the Hook Bolts
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 49
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 54

@A350
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 50
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 55

@A350
SERVICE BULLETIN
Appendix 01 - Affected Part Numbers and Serial Numbers
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 1
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 56

@A350
SERVICE BULLETIN
Appendix 01 - Affected Part Numbers and Serial Numbers
**CONF ALL
**CONF ALL
AFFECTED P/N:
FWD CD AFT CD
WG102AGAAAAF MSN6−9 WH102AHAAAAC MSN6−10
WG102AKAAAAF MSN10−20 WH102ALAAAAC MSN11−20
AFFECTED S/N:
FWD CD AFT CD
UH10007 UH10018 UH10008 UH10018
UH10008 UH10019 UH10009 UH10019
UH10010 UH10020 UH10010 UH10020
UH10011 UH10021 UH10011 UH10021
UH10012 UH10022 UH10012 UH10022
UH10013 UH10013
UH10014 UH10014
UH10015 UH10015
UH10016 UH10016
UH10017 UH10017
MSNs ARE GIVEN FOR INFORMATION, REFERENCE SHOULD BE TAKEN ON BOTH P/N 
AND S/N.
P_SB_52P011_6_ABAA_01_00
Figure A-GABAA - Sheet 01
Affected Part Numbers and Serial Numbers
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 2
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 57

@A350
SERVICE BULLETIN
Appendix 02 - Gantt Chart
**CONF ALL
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 1
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 58

@A350
SERVICE BULLETIN
Appendix 02 - Gantt Chart
**CONF ALL
ELAPSED TIME ASSUMPTION SERVICE BULLETIN No A350−52−P011
SB ELAPSED TIME
(HOURS)
JOB SET−UP
MH ET/S
TOTAL MANHOURS
SB ELAPSED TIME
18.00
9.00
STEPS
1.00 0.50
50
OPEN THE FWD CARGO DOOR 0.25 0.25
3.00 3.00
OPEN THE AFT CARGO DOOR 0.25 0.25
4.50 4.50
RESTORE THE ANTI−CORROSION 4.50 4.50
CLOSE−UP 1.00 0.50
MH
ET/S:
PER
MANHOURS
ELAPSED TIME PER STEP
NUMBER OF PERSONS
01
02
THIS CHART IS ONLY A PROPOSAL.
OPERATORS MAY DETERMINE THAT ANOTHER WAY
TO DO THE WORK IS MORE SUITABLE FOR THEM.
01
02
NOTE:
PER
2
1
1
1
1
1
2
CLOSE THE FWD CARGO DOOR 0.25 0.25 1
:
:
IF A VSB IS INVOLVED, THE ASSOCIATED MANHOURS
ARE NOT REFLECTED IN THIS GANTT CHART.
12 3 4 6 7 89
3.00 3.00 1
CLOSE THE AFT CARGO DOOR 0.25 0.251
PROTECTION OF THE FRAME FORKS
ON THE AFT CARGO DOOR
RESTORE THE ANTI−CORROSION
PROTECTION OF THE FRAME FORKS
ON THE FWD CARGO DOOR
DO A DETAILED VISUAL INSPECTION
FOR PAINT PEEL OFF ON THE 
AFT CARGO DOOR
DO A DETAILED VISUAL INSPECTION
FOR PAINT PEEL OFF ON THE 
FWD CARGO DOOR
P_SB_52P011_6_AAAA_01_02
Figure A-GAAAA - Sheet 01
Elapsed Time Assumption
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 2
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 59

@A350
SERVICE BULLETIN
Service Bulletin REPORTING
TITLE: DOORS - CARGO - INPECTION OF FWD AND AFT CARGO DOOR
PAINT PEEL OFF ON FRAME FORK
MODIFICATION No.: None
SB Reporting status
This Service Bulletin will only be incorporated into affected customized Maintenance and Flight
Operations Products if it is duly reported to Airbus.
General information
The SB Reporting policy is published in ISI 00.00.00135. This document provides information regarding:
the SB Reporting means and benefits, the update of customized Maintenance Products and customized
Flight Operations Products.
If this Service Bulletin has an operational impact, refer to paragraph "Flight Operations Products" for
further information on the update of affected Flight Operations Products.
SB Reporting procedure
Standard practice to report SB is to use the online reporting application on AirbusWorld.
Refer to ISI 00.00.00179:
- For complete information on reporting means to Airbus. Question 2 "What are the standard
practices for SB reporting?"
- If this SB requires previous or simultaneous accomplishment of other SBs, Question 3 "What about
the reporting of prerequisite Service Bulletin?"
NOTE:
 ISI 00.00.00179 covers all the frequently asked questions about SB Reporting. It is revised on a
regular basis.
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 1
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 60

@A350
SERVICE BULLETIN
QUALITY PERCEPTION FORM
Use this form to tell us what is your perception of the quality of this Service Bulletin. The reported data
that you provide us will be used to analyse areas of difficulties and to take corrective action to further
improve the quality of our Service Bulletins.
We thank you for the time you have taken in completing this form.
(Please rate on a scale of 1 to 4, with 4 being the highest score)
- Quality rating of this SB 4321
- Quality rating of the Accomplishment Instructions 4321
- Quality rating of the Illustrations 4321
- Is this SB easy to understand ? Y/N
If you have had difficulties in the accomplishment of this SB please quote below the area(s) and give a
short description of the issue.
Planning Material Instructions
X Effectivity X Kit content X Preparation
X Reason X List of Materials Operator Supplied X Mod/Inspection
X Manpower X Industry support X Test
X References X Re-identification X Close-Up
X Publication X Tooling X Illustrations
Comments:
Operator: Date:
Name/Title:
Please return this form to:
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Attn : SEM4 Service Bulletins Management
F A X:( 3 3 )56 19 34 25 1
Or via your Resident Customer Support Office.
DATE: May 12/17 SERVICE BULLETIN No.: A350-52-P011
REVISION No.: 00 - May 12/17 Page: 1
6
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
