# Airbus Service Bulletin A350-52-P043: No revision named

- Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2022-0382, the docket of AD 2022-13-13. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Airbus Service Bulletin A350-52-P043](https://openairdocs.org/service-documents/airbus/a350-52-p043.md)
- Title as filed: SB_52-P043_r00
- Pages: 33
- PDF: https://openairdocs.org/files/sha256/f8/ec/f8ecfcaffe9e609cfe2da6eca87817275650855b731db9ee7dd51635b10f299c
- Page: https://openairdocs.org/service-documents/airbus/a350-52-p043/file/f8ecfcaffe9e

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

A350
SERVICE BULLETIN
REV 00 Aug 13/21 A350-52-P043
Page 1
CONF ALL
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
 
The content of this document is the property of Airbus. All rights including copyrights are reserved.
It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may information
contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of the
copyright. Requests for reproduction of any data in this document and the media authorized for it must
be addressed to Airbus.
MANDATORY MANDATORY MANDATORY
ATA SYSTEM: 52
TITLE: DOORS - PASSENGER/CREW - PAX DOOR STOP SCREW HEADS
DETACHED
MODIFICATION No.:
None

### Page 2

A350
SERVICE BULLETIN
SUMMARY
REV 00 Aug 13/21 A350-52-P043
Page 2
ATA SYSTEM: 52
TITLE: DOORS - PASSENGER/CREW - PAX DOOR STOP SCREW HEADS
DETACHED
SUMMARY
This summary is for information only and is not approved for modification of the aircraft.
A. MODIFICATIONS
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
B. REASON
(1) History
Several operators have reported single or multiple cases of door stop screws with
missing heads on Airbus A350 passenger doors.
(2) Objective/Action
This Service Bulletin is published to advise the operators to perform a repetitive visual
inspection at each door stop screw of each passenger door.
(3) Advantages
The accomplishment of this Service Bulletin ensures the dispatch reliability and will
continue to maintain the structural integrity of the A350 aircraft.
(4) Operational/Maintenance Consequences
None
C. GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE MANDATORY COST SAVING NO
A/C OPERATION
AFFECTED
NO VENDOR SB NO
CANCELS INSPECTION SB NO ETOPS AFFECTED NO
PAX COMFORT AFFECTED NO POTENTIAL AD YES
RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO
LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO
NOTE: Service Bulletin must be accomplished.
D. MAINTENANCE CONFIGURATION
No specific aircraft maintenance configuration required.
E. MATERIAL PRICE INFORMATION

### Page 3

A350
SERVICE BULLETIN
SUMMARY
REV 00 Aug 13/21 A350-52-P043
Page 3
(1) Inspection of the Door Stop Screws
(a) T ask set A350-A-52-XX-P043-01000-93BA-A Inspection of the Door Stop Screws
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS
Aircraft standard tools See SB See Note Screw driver
Components See SB See Note Bolt
NOTE: Price information to be obtained from the given supplier.
F. APPLICABILITY
This Service Bulletin is applicable to this (these) operator(s):
36V 81K 82W 96U A1L AAR AFL AFR AIB AZU BAW CAL CCA CES CHH CPA CRK CSC CSN DAL
DLH ETD ETH EVE F2I FBU FIN FJI FWI GAF HVN IBE JAL KAY LHT MAS MAU PAL QTR SAS SIA
TAM THA THY VIR WFL
G. CONCURRENT REQUIREMENTS
None
H. NATURE OF THE WORK
(1) Inspection of the Door Stop Screws
(a) T ask set A350-A-52-XX-P043-01000-93BA-A Inspection of the Door Stop Screws
AIRCRAFT YES
EQUIPMENT NO
I. MANPOWER
(1) Inspection of the Door Stop Screws
(a) T ask set A350-A-52-XX-P043-01000-93BA-A Inspection of the Door Stop Screws
MANPOWER
TOTAL MAN-HOURS 8.75 h
ELAPSED TIME (HOURS) 8.75 h

### Page 4

A350
SERVICE BULLETIN
SUMMARY
Figure ICN-A350-A-52XXP043-A-FAPE3-05W5O-A-002-01 Fig.SA Sol.AA SHEET 1/1
REV 00 Aug 13/21 A350-52-P043General overview
Page 4
J. GENERAL OVERVIEW
CONF 001 004-006
Z831 Z832
Z833
Z834
Z841
Z842
Z843
Z844
A
A
TYPICAL TO ALL
PAX DOORS
B
DOOR STOP 3
DOOR STOP 4
DOOR STOP 5
DOOR STOP 2
DOOR STOP 6
DOOR STOP 7
DOOR STOP 1
DOOR STOP 3
DOOR STOP 4
DOOR STOP 5
DOOR STOP 2
DOOR STOP 6
DOOR STOP 7
DOOR STOP 1
FWD B
LH SHOWN
RH SYMMETRICAL
ICN-A350-A-52XXP043-A-FAPE3-05W5O-A-002-01

### Page 5

A350
SERVICE BULLETIN
REV 00 Aug 13/21 A350-52-P043
Page 5
ATA SYSTEM: 52
TITLE: DOORS - PASSENGER/CREW - PAX DOOR STOP SCREW HEADS
DETACHED
CONF ALL
1. PLANNING INFORMATION
A. APPLICABILITY
NOTE: This Service Bulletin is subject to an open-end applicability, meaning that
subsequent aircraft from those in the current applicability are also impacted.
A revision will be ordered only on operator request if they intend to embody
this Service Bulletin on their MSN not yet included in the current applicability.
Depending on the request date, an RDAF could be provided while waiting for SB
revision. Please refer to Ref. ISI 00.00.00258.
(1) Models
ON A/C 0065, 0071, 0088, 0102, 0110, 0118, 0125, 0141, 0161, 0169, 0188, 0206, 0215,
0225, 0229, 0233, 0241, 0252, 0258, 0262, 0266, 0274, 0286, 0290, 0296, 0298, 0306,
0315, 0319, 0326, 0330, 0332, 0336, 0340, 0342, 0346, 0350, 0356, 0362, 0368, 0372,
0374, 0380, 0382, 0386, 0388, 0399, 0402, 0409, 0415, 0420, 0424, 0426, 0430, 0432,
0434, 0438, 0440, 0444, 0446, 0473, 0482, 0490, 0492, 0495, 0503, 0507, 0509, 0533,
0539, 0547, 0560, 0563
350-1041
ON A/C 0005-0058, 0060-0064, 0066-0070, 0072-0087, 0089-0101, 0103-0107, 0109, 0111-
0117, 0119-0124, 0126-0130, 0132-0138, 0140, 0142-0151, 0153-0155, 0157-0160, 0162-
0165, 0167, 0168, 0170, 0172-0187, 0189-0193, 0195-0205, 0207-0214, 0216-0221, 0223,
0224, 0226-0228, 0230-0232, 0234-0240, 0243-0251, 0254-0257, 0259-0261, 0263-0265,
0267-0273, 0276-0285, 0287, 0289, 0291-0295, 0297, 0299-0303, 0305, 0307-0314, 0316,
0318, 0320-0325, 0327-0329, 0331, 0333-0335, 0337-0339, 0341, 0343-0345, 0347-0349,
0351, 0352, 0354, 0355, 0357-0359, 0363-0366, 0369-0371, 0373, 0375, 0376, 0378, 0379,
0381, 0383, 0385, 0387, 0389-0398, 0400, 0401, 0403-0408, 0410-0414, 0416-0419, 0421-
0423, 0425, 0427-0429, 0431, 0433, 0435-0437, 0439, 0441-0443, 0445, 0447-0449, 0451-
0455, 0457-0460, 0462-0466, 0468-0472, 0474-0476, 0478, 0479, 0481, 0483-0485, 0487-
0489, 0491, 0493, 0494, 0496, 0497, 0499, 0500, 0502, 0504-0506, 0510, 0512, 0516, 0517,
0520, 0524, 0526, 0528, 0530, 0531, 0535-0538, 0540-0546, 0548, 0550-0552, 0554, 0558,
0559, 0561, 0562, 0564, 0565, 0570
350-941
CONF ALL
(2) Applicability by MSN
0005-0058 0060-0107 0109-0130 0132-0138 0140-0151 0153-0155 0157-0165 0167-
0170 0172-0193 0195-0221 0223-0241 0243-0252 0254-0274 0276-0287 0289-0303
0305-0316 0318-0352 0354-0359 0362-0366 0368-0376 0378-0383 0385-0449 0451-
0455 0457-0460 0462-0466 0468-0476 0478 0479 0481-0485 0487-0497 0499 0500
0502-0507 0509 0510 0512 0516 0517 0520 0524 0526 0528 0530 0531 0533 0535-
0548 0550-0552 0554 0558-0565 0570
(3) MSN by configuration
MSN CONFIGURATION
0005 0006 0007 0008 0009 0010 0011 0012 0013 0014 0015
0016 0017 0018 0019 0020 0021 0022 0023 0024 0025 0026
0027 0028 0029 0030 0031 0032 0033 0034 0035 0036 0037
001

### Page 6

A350
SERVICE BULLETIN
REV 00 Aug 13/21 A350-52-P043
Page 6
MSN CONFIGURATION
0038 0039 0040 0041 0042 0043 0044 0045 0046 0047 0048
0049 0050 0051 0052 0053 0054 0055 0056 0057 0058 0060
0061 0062 0063 0064 0065 0066 0067 0068 0069 0070 0071
0072 0073 0074 0075 0076 0077 0078 0079 0080 0081 0082
0083 0084 0085 0086 0087 0088 0089 0090 0091 0092 0093
0094 0095 0096 0097 0098 0099 0100 0101 0102 0103 0104
0105 0106 0107 0109 0110 0111 0112 0113 0114 0115 0116
0117 0118 0119 0120 0121 0122 0123 0124 0125 0126 0127
0128 0129 0130 0132 0133 0134 0135 0136 0137 0138 0140
0141 0142 0143 0144 0145 0146 0147 0148 0149 0150 0151
0153 0154 0155 0157 0158 0159 0160 0161 0162 0163 0164
0165 0167 0168 0169 0170 0172 0173 0174 0175 0176 0177
0178 0179 0180 0181 0182 0183 0184 0185 0186 0187 0188
0189 0190 0191 0192 0193 0195 0196 0197 0198 0199 0200
0201 0202 0203 0204 0205 0206 0207 0208 0209 0210 0211
0212 0213 0214 0215 0216 0217 0218 0219 0220 0221 0223
0224 0225 0226 0227 0228 0229 0230 0231 0232 0233 0234
0235 0236 0237 0238 0239 0240 0241 0243 0244 0245 0246
0247 0248 0249 0250 0251 0252 0254 0255 0256 0257 0258
0259 0260 0261 0262 0263 0264 0265 0266 0267 0268 0269
0270 0271 0272 0273 0274 0276 0277 0278 0279 0280 0281
0282 0283 0284 0285 0286 0287 0289 0290 0291 0292 0293
0294 0295 0296 0297 0298 0299 0300 0301 0302 0303 0305
0306 0307 0308 0309 0310 0311 0312 0313 0314 0315 0316
0318 0319 0320 0321 0322 0323 0324 0325 0326 0327 0328
0329 0330 0331 0332 0333 0334 0335 0336 0337 0338 0339
0340 0341 0342 0343 0344 0345 0346 0347 0348 0349 0350
0351 0352 0354 0355 0356 0357 0358 0359 0362 0363 0364
0365 0366 0368 0369 0370 0371 0372 0373 0374 0375 0376
0378 0379 0380 0381 0382 0383 0385 0386 0387 0388 0389
0390 0391 0392 0393 0394 0395 0396 0397 0398 0399 0400
0401 0402 0403 0404 0405 0406 0407 0408 0409 0410 0411
0412 0413 0414 0415 0416 0417 0418 0419 0420 0421 0422
0423 0424 0425 0426 0427 0428 0429 0430 0431 0432 0433
0434 0435 0436 0437 0438 0439 0440 0441 0442 0443 0444
0445 0446 0447 0448 0449 0451 0452 0453 0454 0455 0457
0458 0459 0460 0462 0463 0464 0465 0466 0468 0469 0470
0471 0472 0473 0474 0475 0476 0478 0479 0481 0482 0483
0484 0485 0487 0488 0489 0490 0491 0492 0493 0494 0495
0496 0497 0499 0500 0502 0503 0504 0505 0506 0507 0509
0510 0512 0516 0517 0520 0524 0526 0528 0530 0531 0533
0535 0536 0537 0538 0539 0540 0541 0542 0543 0544 0545
0546 0547 0548 0550 0551 0552 0554 0558 0559 0560 0561
0562 0563 0564 0565 0570
(4) Configuration definition
Configuration 001
CONF 001 is applicable for all the aircraft affected by this Service Bulletin as a
standard configuration.
B. CONCURRENT REQUIREMENTS
None
C. REASON

### Page 7

A350
SERVICE BULLETIN
REV 00 Aug 13/21 A350-52-P043
Page 7
(1) History
Several operators have reported single or multiple cases of door stop screws with
missing heads on Airbus A350 passenger doors.
(2) Objective/Action
This Service Bulletin is published to advise the operators to perform a repetitive visual
inspection at each door stop screw of each passenger door.
(3) Advantages
The accomplishment of this Service Bulletin ensures the dispatch reliability and will
continue to maintain the structural integrity of the A350 aircraft.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
T o accomplish this Service Bulletin it is necessary to:
(1) Inspection of the Door Stop Screws
(a) T ask set A350-A-52-XX-P043-01000-93BA-A Inspection of the Door Stop Screws
1 Do a Visual Inspection of the Door Stop Screws
2 Replace the Door Stop Screws if damaged
3 Complete the Inspection Report Sheet
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
This Service Bulletin has been classified Mandatory. It is expected that an
Airworthiness Directive (AD) published by the European Union Aviation Safety Agency
(EASA) will be issued to confirm this classification. It is anticipated that the AD will
confirm the thresholds and intervals given in the subsequent tables, but reference
should be made to the AD for confirmation of the mandated accomplishment
timescale.
T able 1 Visual Inspection
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL
All aircraft Do a visual
inspection of the
door stop screws
Ref. T ask A350-
A-52-XX-P043-
01ZZZ-311Z-A
600 Flight
Cycle(s) from
Aircraft first flight
Within 400
Flight Cycle(s)
from the first
issue of this SB
600 Flight
Cycle(s)
No findings Complete
and send the
inspection report
Ref. T ask A350-
A-52-XX-P043-
02ZZZ-90AZ-A
1 month(s) from
Completion
of the visual
inspections
on all doors
None None

### Page 8

A350
SERVICE BULLETIN
REV 00 Aug 13/21 A350-52-P043
Page 8
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL
No findings Repeat the visual
inspection of the
door stop screws
Ref. T ask A350-
A-52-XX-P043-
01ZZZ-311Z-A
None None 600 Flight
Cycle(s) from last
visual inspection
One broken
door stop screw
per door on
doors 1 thru 4
Replace the door
stop screw(s)
and send the
broken screw(s)
to AIRBUS Ref.
T ask A350-A-
52-XX-P043-
01ZZZ-720Z-A
Before next
Flight Cycle(s)
None None
One broken
door stop screw
per door on
doors 1 thru 4
Complete
and send the
inspection report
Ref. T ask A350-
A-52-XX-P043-
02ZZZ-90AZ-A
1 month(s) from
Completion
of the visual
inspections
on all doors
None None
One broken
door stop screw
per door on
doors 1 thru 4
Contact AIRBUS
and follow their
instructions
None Within 400
Flight Cycle(s)
None
Broken door stop
screw(s) replaced
Repeat the visual
inspection of the
door stop screws
Ref. T ask A350-
A-52-XX-P043-
01ZZZ-311Z-A
None None 600 Flight
Cycle(s) from last
visual inspection
Up to two broken
door stop screws
on one door
side and max
one broken door
stop screw on
the other side
per door on
door 1 thru 4
Replace the door
stop screw(s)
and send the
broken screw(s)
to AIRBUS Ref.
T ask A350-A-
52-XX-P043-
01ZZZ-720Z-A
Before next
Flight Cycle(s)
None None
Up to two broken
door stop screws
on one door
side and max
one broken door
stop screw on
the other side
per door on
door 1 thru 4
Complete
and send the
inspection report
Ref. T ask A350-
A-52-XX-P043-
02ZZZ-90AZ-A
1 month(s) from
Completion
of the visual
inspection
None None
Up to two broken
door stop screws
on one door
Contact AIRBUS
and follow their
instructions
None Within 400
Flight Cycle(s)
None

### Page 9

A350
SERVICE BULLETIN
REV 00 Aug 13/21 A350-52-P043
Page 9
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL
side and max
one broken door
stop screw on
the other side
per door on
door 1 thru 4
Broken door stop
screw(s) replaced
Repeat the visual
inspection of the
door stop screws
Ref. T ask A350-
A-52-XX-P043-
01ZZZ-311Z-A
None None 600 Flight
Cycle(s) from last
visual inspection
More than two
broken door stop
screws on one
door side and/or
more than three
broken door stop
screws per door
Replace the door
stop screw(s)
and send the
broken screw(s)
to AIRBUS Ref.
T ask A350-A-
52-XX-P043-
01ZZZ-720Z-A
Before next
Flight Cycle(s)
None None
More than two
broken door stop
screws on one
door side and/or
more than three
broken door stop
screws per door
Do a general
visual inspection
of the adjacent
door stop area
and surrounding
structure
Before next
Flight Cycle(s)
None None
More than two
broken door stop
screws on one
door side and/or
more than three
broken door stop
screws per door
Complete
and send the
inspection report
Ref. T ask A350-
A-52-XX-P043-
02ZZZ-90AZ-A
1 month(s) from
Completion
of the visual
inspection
None None
More than two
broken door stop
screws on one
door side and/or
more than three
broken door stop
screws per door
Contact AIRBUS
and follow their
instructions
None Within 50
Flight Cycle(s)
None
Broken door stop
screw(s) replaced
and no findings
at the adjacent
door stop area
and surrounding
structure
Repeat the visual
inspection of the
door stop screws
Ref. T ask A350-
A-52-XX-P043-
01ZZZ-311Z-A
None None 600 Flight
Cycle(s) from last
visual inspection
F. APPROVAL

### Page 10

A350
SERVICE BULLETIN
REV 00 Aug 13/21 A350-52-P043
Page 10
The technical content of this document is approved under the authority of the Design
Organisation Approval ref. EASA.21J.031.
If an aircraft listed in the applicability has a modification or repair embodied that is not
of AIRBUS origin, and which affects the content of this Service Bulletin, the operator
is responsible for obtaining approval by its airworthiness authority for any adaptation
necessary before incorporation of the Service Bulletin.
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Inspection of the Door Stop Screws
(a) T ask set A350-A-52-XX-P043-01000-93BA-A Inspection of the Door Stop Screws
PREPARATION
Job Set-up 2.00 h
PROCEDURE
Do a Visual Inspection of the Door Stop Screws 4.00 h
Replace the Door Stop Screws if damaged 0.50 h
Complete the Inspection Report Sheet 0.25 h
PREPARATION FOR TEST
None
TEST
None
CLOSE-UP
Close-up 2.00 h
TOTAL MAN-HOURS 8.75 h
ELAPSED TIME (HOURS) 8.75 h
NOTE: The man-hours for the replacement of the door stop fitting screws are
calculated for the replacement of one door stop fitting screw.
H. WEIGHT AND BALANCE
Not changed
I. ELECTRICAL LOAD DATA
Not changed
J. REFERENCES
(1) Inspection of the Door Stop Screws
(a) T ask set A350-A-52-XX-P043-01000-93BA-A Inspection of the Door Stop Screws
COMPONENT MAINTENANCE MANUAL (CMM)
52-11-30 (D8518) 52-12-30 (D8518)
52-13-30 (D8518)

### Page 11

A350
SERVICE BULLETIN
REV 00 Aug 13/21 A350-52-P043
Page 11
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
IN SERVICE INFORMATION (ISI)
00.00.00179 00.00.00258
MAINTENANCE PROCEDURE (MP)
A350-A-24-41-XX-00ZZZ-170Z-A A350-A-52-1X-XX-00ZZZ-132Z-A
A350-A-52-1X-XX-00ZZZ-133Z-A
A350-A-52-1X-XX-00ZZZ-270Z-A
A350-A-52-1X-XX-01ZZZ-132Z-A
A350-A-52-1X-XX-02ZZZ-132Z-A
A350-A-52-1X-XX-02ZZZ-270Z-A
A350-A-52-1X-XX-03ZZZ-270Z-A
A350-A-52-11-73-09ZZZ-270Z-A A350-A-52-12-73-07ZZZ-270Z-A
A350-A-52-13-73-09ZZZ-270Z-A A350-A-52-71-14-00ZZZ-270Z-A
A350-A-52-71-15-00ZZZ-270Z-A
TECHNICAL FOLLOW UP (TFU)
52.10.00069
K. PUBLICATION AFFECTED
None
L. INDUSTRY SUPPORT INFORMATION
AIRBUS will credit the man-hours indicated in this Service Bulletin for inspections that are
performed on aircraft in warranty at the time of such inspection. Credit will be at the agreed
in-house warranty labor rate. Claims for labor allowance should be received not later than
90 days after completion of the last affected warranted aircraft.
For those aircraft in warranty at the time of such inspection with findings further to
inspection as per this Service Bulletin, AIRBUS will credit the man-hours indicated in this
Service Bulletin for corrections that are performed on aircraft in warranty at the time of
such correction. Credit will be at the agreed in-house warranty labor rate. Claims for labor
allowance should be received not later than 90 days after completion of the last affected
warranted aircraft.
For those aircraft in warranty at the time of such inspection with findings further to
inspection as per this Service Bulletin, AIRBUS will share the costs by crediting the operator
supplied standard hardware parts. Claims for this allowance should be received not later
than 90 days after completion of the last affected aircraft of your fleet.

### Page 12

A350
SERVICE BULLETIN
REV 00 Aug 13/21 A350-52-P043
Page 12
2. MATERIAL INFORMATION
A. MATERIAL APPLICABILITY
Material for task set A350-A-52-XX-P043-01000-93BA-A Inspection of the Door
Stop Screws
MATERIAL QTY SEE NOTES
Aircraft standard tools See SB
Components See SB
B. TOOLING
Aircraft standard tools for task set A350-A-52-XX-P043-01000-93BA-A Inspection
of the Door Stop Screws
Procurement address D4296
AIRBUS Material, Logistics and Suppliers
Customer Order Fulfilment
Weg beim Jaeger 150
22335 HAMBURG
GERMANY
Phone: +49 (0) 40 50 76 40 02
E-mail: Please contact your Single Point Of Contact
(SPOC)
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
4199T061 (D4296) 1 SCREW
C. CONSUMABLES
No consumables
D. LIST OF NEW PARTS
Components for task set A350-A-52-XX-P043-01000-93BA-A Inspection of the Door
Stop Screws
Procurement address D4296
AIRBUS Material, Logistics and Suppliers
Customer Order Fulfilment
Weg beim Jaeger 150
22335 HAMBURG
GERMANY
Phone: +49 (0) 40 50 76 40 02
E-mail: Please contact your Single Point Of Contact
(SPOC)
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
1 V0007000220200(D4296) 1 BOLT

### Page 13

A350
SERVICE BULLETIN
REV 00 Aug 13/21 A350-52-P043
Page 13
E. LIST OF EXISTING PARTS
No parts

### Page 14

A350
SERVICE BULLETIN
REV 00 Aug 13/21 A350-52-P043
Page 14
3. ACCOMPLISHMENT INSTRUCTIONS
Task set A350-A-52-XX-P043-01000-93BA-A (A350-A-52-XX-P043-01ZZZ-93BZ-A)
Inspection of the Door Stop Screws
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL
WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND MECHANICALLY
SERVICEABLE). WHEN YOU DO A MAINTENANCE WORK, REPAIRS OR
MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND
THE WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND
DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESP (refloc="20-55-XX" func="042"
seq="01") OR ESPM (refloc="20-55-00").
NOTE: The accomplishment instructions of this Service Bulletin include procedures given in
other documents or in other sections of the Service Bulletin. When the words “refer to”
are used and the operator has a procedure accepted by the local authority he belongs to,
the accepted alternative procedure can be used. When the words “in accordance with”
are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service Bulletin.
Operators can therefore, as deemed necessary, omit or add access and/or close-up steps
to add flexibility to their maintenance operations as long as the technical intent of the
Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms. Refer
to paragraph 1.J., References, for the definition of acronyms.
NOTE: This Service Bulletin is classified mandatory or expected to be classified mandatory by
an Airworthiness Directive (AD). The paragraphs 3.C. and 3.E. in these accomplishment
instructions are Required for Compliance (RC) and must be done to comply with the AD.
T o allow more flexibility, the rule "refer to" and "in accordance with" will apply to these
paragraphs 3.C. and 3.E. Other paragraphs are recommended and may be deviated from,
done as part of other actions or done with accepted methods different from those given
in the Service Bulletin, as long as the RC paragraphs can be done and the aircraft can be
put back into a serviceable condition.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance necessary
to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, including Required for Compliance paragraph
contained herein, contact AIRBUS for further instructions and approval.
NOTE: The purpose of flowcharts is to supplement the information given in the Procedure and
Compliance paragraphs and not to serve as the primary source for tasks or compliance
times given in this Service Bulletin.
NOTE: Discarded parts must be managed at the operator's discretion.

### Page 15

A350
SERVICE BULLETIN
REV 00 Aug 13/21 A350-52-P043
Page 15
A. TASK SET ASSOCIATED INFORMATION
Task Manpower
TOTAL MAN-HOURS 8.75 h
ELAPSED TIME (HOURS) 8.75 h
B. PREPARATION
(1) Task A350-A-52-XX-P043-01001-900A-A (A350-A-52-XX-P043-01ZZZ-900Z-A)
Job Set-up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 2.00 h
Minimum Number of person 1
Elapsed Time 2.00 h
Skills Utility
Referenced Information
Manuals/Drawings References/Sheets
INTRO A350-A-00-61-04-11ZZZ-018Z-D
MP
A350-A-24-41-XX-00ZZZ-170Z-A
A350-A-52-1X-XX-00ZZZ-132Z-A
A350-A-52-1X-XX-02ZZZ-132Z-A
Procedure
NOTE: For the basic Aircraft configuration, refer to Ref. INTRO A350-A-00-61-04-
11ZZZ-018Z-D “Maintenance Procedure - Introduction” .
(a) Make sure that the aircraft is electrically grounded, refer to Ref. MP A350-A-24-
41-XX-00ZZZ-170Z-A.
(b) Do the special precautions before work on the passenger/crew doors, refer to
Ref. MP A350-A-52-1X-XX-02ZZZ-132Z-A.
(c) Open the passenger/crew doors, refer to Ref. MP A350-A-52-1X-XX-00ZZZ-132Z-
A.
C. PROCEDURE
(1) Task A350-A-52-XX-P043-01001-311A-A (A350-A-52-XX-P043-01ZZZ-311Z-A)
Do a Visual Inspection of the Door Stop Screws
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
831
832
833
834
841
842
843
844

### Page 16

A350
SERVICE BULLETIN
REV 00 Aug 13/21 A350-52-P043
Page 16
Manpower/Resources/Skills
Man-hours 4.00 h
Minimum Number of person 1
Elapsed Time 4.00 h
Skills Airframe
Procedure
Ref. Fig.BA Door stop screw inspection
Ref. Fig.FA Flow Chart
(a) On all doors, do a visual inspection of all door stop screws on the FWD and AFT
sides of the doors for missing screw heads.
1 In case of no finding during current inspection:
a After completion of all visual inspections, complete and send the
Inspection Report sheet in accordance with Ref. T ask A350-A-52-XX-
P043-02ZZZ-90AZ-A.
NOTE: During first inspection, the inspection report shall include
the current no finding and the previous finding(s) occurred
before this inspection, if any.
NOTE: For every inspection that follows with no finding, do not
report the inspection result.
b Repeat the visual inspection on all doors in accordance with the
accomplishment timescale given in Para 1.E.(2).
2 In case of finding(s) during current inspection:
a If you find one door stop screw head missing at any position at the
affected door(s):
<1> Replace the broken door stop screw(s) and send the broken
screw(s) to AIRBUS, refer to Ref. T ask A350-A-52-XX-P043-
01ZZZ-720Z-A.
<2> Complete and send the Inspection Report sheet in accordance
with Ref. T ask A350-A-52-XX-P043-02ZZZ-90AZ-A.
NOTE: The inspection report shall include the current finding
and the previous finding(s), if any.
<3> Contact AIRBUS and follow their instructions in accordance the
accomplishment timescale given in Para 1.E.(2).
<4> Repeat the visual inspection on all doors in accordance with the
accomplishment timescale given in Para 1.E.(2).
b If you find up to three missing door stop screws heads on a single
door, up to two on one side between door stop position 5 and 7 and
up to one at the other side between door stop position 5 and 7 at the
affected door(s):
<1> Replace the broken door stop screw(s) and send the broken
screw(s) to AIRBUS, refer to Ref. T ask A350-A-52-XX-P043-
01ZZZ-720Z-A.

### Page 17

A350
SERVICE BULLETIN
REV 00 Aug 13/21 A350-52-P043
Page 17
<2> Complete and send the Inspection Report sheet in accordance
with Ref. T ask A350-A-52-XX-P043-02ZZZ-90AZ-A.
NOTE: The inspection report shall include the current finding
and the previous finding(s), if any.
<3> Contact AIRBUS and follow their instructions in accordance the
accomplishment timescale given in Para 1.E.(2).
<4> Repeat the visual inspection on all doors in accordance with the
accomplishment timescale given in Para 1.E.(2).
c If you find more than one broken door stop screw outside the door
stop positions 5 to 7, more than 2 broken screws between door stop
position 5 and 7 on one door side, or more than three broken door
stop screws on one door:
<1> Replace the broken door stop screw(s) and send the broken
screw(s) to AIRBUS, refer to Ref. T ask A350-A-52-XX-P043-
01ZZZ-720Z-A.
<2> Do a general visual inspection of the adjacent door stop area
and surrounding structure (no lining removal required).
<3> Complete and send the Inspection Report sheet in accordance
with Ref. T ask A350-A-52-XX-P043-02ZZZ-90AZ-A.
NOTE: The inspection report shall include the current finding
and the previous finding(s), if any.
<4> Contact AIRBUS and follow their instructions in accordance the
accomplishment timescale given in Para 1.E.(2).
<5> Repeat the visual inspection on all doors in accordance with the
accomplishment timescale given in Para 1.E.(2).

### Page 18

A350
SERVICE BULLETIN
Figure ICN-A350-A-52XXP043-A-FAPE3-05VYN-A-002-01 Fig.BA Sol.AA SHEET 1/2
REV 00 Aug 13/21 A350-52-P043Door stop screw inspection
Page 18
CONF ALL
Z831 Z832
Z833
Z834
Z841
Z842
Z843
Z844
A
A
TYPICAL TO ALL
PAX DOORS
B
DOOR STOP 3
DOOR STOP 4
DOOR STOP 5
DOOR STOP 2
DOOR STOP 6
DOOR STOP 7
DOOR STOP 1
C
DOOR STOP 3
DOOR STOP 4
DOOR STOP 5
DOOR STOP 2
DOOR STOP 6
DOOR STOP 7
DOOR STOP 1
FWD B
C
LH SHOWN
RH SYMMETRICAL
ICN-A350-A-52XXP043-A-FAPE3-05VYN-A-002-01

### Page 19

A350
SERVICE BULLETIN
Figure ICN-A350-A-52XXP043-A-FAPE3-05VYO-A-001-01 Fig.BA Sol.AA SHEET 2/2
REV 00 Aug 13/21 A350-52-P043Door stop screw inspection
Page 19
CONF ALL
APPLICABLE TO ALL
DOOR STOPS (1-7 LH/RH)
LH SHOWN
RH SYMMETRICAL
SCREW HEAD
TO BE
INSPECTED
C
ICN-A350-A-52XXP043-A-FAPE3-05VYO-A-001-01

### Page 20

A350
SERVICE BULLETIN
Figure ICN-A350-A-52XXP043-A-FAPE3-05W5N-A-003-01 Fig.FA Sol.AA SHEET 1/1
REV 00 Aug 13/21 A350-52-P043Flow Chart
Page 20
CONF ALL
NOTE:
THE PURPOSE OF FLOWCHARTS IS TO SUPPLEMENT THE
INFORMATION GIVEN IN THE PROCEDURE AND COMPLIANCE
PARAGRAPHS AND NOT TO SERVE AS THE PRIMARY SOURCE
FOR TASKS OR COMPLIANCE TIMES GIVEN IN
THIS SERVICE BULLETIN.
FOR THE COMPLIANCE TIMES, REFER TO THE
ACCOMPLISHMENT TIMESCALE PARA 1.E.(2).
PERFORM A GENERAL VISUAL INSPECTION
OF ALL PASSENGER DOOR STOPS SCREWS
SCREW
FOUND WITH
NO
REPLACE DAMAGED SCREW(S),
SEND THEM TO AIRBUS
MISSING HEAD? YES
REPEAT INSPECTION
REPORT RESULT OF
FIRST INSPECTION
TO AIRBUS
PROVIDE INSPECTION REPORT
FURTHER INSTRUCTION
AND CONTACT AIRBUS FOR
ICN-A350-A-52XXP043-A-FAPE3-05W5N-A-003-01

### Page 21

A350
SERVICE BULLETIN
REV 00 Aug 13/21 A350-52-P043
Page 21
(2) Task A350-A-52-XX-P043-01001-720A-A (A350-A-52-XX-P043-01ZZZ-720Z-A)
Replace the Door Stop Screws if damaged
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 0.50 h
Minimum Number of person 1
Elapsed Time 0.50 h
Skills Airframe
Material necessary to do the job
Aircraft standard tools
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
4199T061 1 SCREW
Components
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
1 V0007000220200 1 BOLT
Referenced Information
Manuals/Drawings References/Sheets
MP
A350-A-52-11-73-09ZZZ-270Z-A
A350-A-52-12-73-07ZZZ-270Z-A
A350-A-52-13-73-09ZZZ-270Z-A
A350-A-52-1X-XX-00ZZZ-270Z-A
A350-A-52-1X-XX-02ZZZ-270Z-A
A350-A-52-1X-XX-03ZZZ-270Z-A
A350-A-52-71-14-00ZZZ-270Z-A
A350-A-52-71-15-00ZZZ-270Z-A
CMM
52-11-30 (D8518)
52-12-30 (D8518)
52-13-30 (D8518)
Procedure
Ref. Fig.BB Door stop screw replacement
(a) Replace the broken door stop screw, refer to :
1 For the replacement of broken door stop screws, item (1), use:
1 BOLT V0007000220200 Item 1
2 For the removal/installation of the door stop screw, use:
1 SCREW DRIVER, DOOR
STOPPER
4199T061  
3 In case of a maximum of two broken screw heads at one door have been
detected:
a If the missing screw head(s) have been detected on door stop
position 2 and/or door stop position 6:
<1> Replace the door stop screw(s), refer to
- Ref. CMM 52-11-30 (D8518) for door 1 (LH/RH)

### Page 22

A350
SERVICE BULLETIN
REV 00 Aug 13/21 A350-52-P043
Page 22
- Ref. CMM 52-12-30 (D8518) for doors 2 and 3 (LH/RH)
- Ref. CMM 52-13-30 (D8518) for door 4 (LH/RH).
<2> Close the door and adjust the replaced door stop screw(s) to
be in contact to the frame side stop fitting and guarantee in
parallel the radial gap of 0,8 mm 0/+0,5 mm of the adjacent
guide fitting(s), refer to
- Ref. MP A350-A-52-11-73-09ZZZ-270Z-A for door 1 (LH/
RH)
- Ref. MP A350-A-52-12-73-07ZZZ-270Z-A for doors 2 and 3
(LH/RH)
- Ref. MP A350-A-52-13-73-09ZZZ-270Z-A for door 4 (LH/
RH).
NOTE: Do not touch the guide fitting(s) for adjustment.
<3> If the door stop screw(s) are replaced at the aft door side, check
and ensure in addition the gap between the sensor and target
of the two closed sensors, refer to
- Ref. MP A350-A-52-71-14-00ZZZ-270Z-A for door 1 (LH/
RH)
- Ref. MP A350-A-52-71-15-00ZZZ-270Z-A for the doors 2 to
4 (LH/RH).
<4> Put a red mark on the replaced door stop screws.
b If the missing screw head(s) have been detected on the remaining
door stop positions:
<1> Replace the door stop screw(s), refer to
- Ref. CMM 52-11-30 (D8518) for door 1 (LH/RH)
- Ref. CMM 52-12-30 (D8518) for doors 2 and 3 (LH/RH)
- Ref. CMM 52-13-30 (D8518) for door 4 (LH/RH).
<2> Close the door and adjust the door stop screw(s) to guarantee
the gap of 0,4 mm +/- 0,2 mm to the frame side door stop
fitting(s), refer to
- Ref. MP A350-A-52-1X-XX-00ZZZ-270Z-A for door 1 (LH/
RH)
- Ref. MP A350-A-52-1X-XX-02ZZZ-270Z-A for doors 2 and 3
(LH/RH)
- Ref. MP A350-A-52-1X-XX-03ZZZ-270Z-A for door 4 (LH/
RH).
<3> Put a red mark on the replaced door stop screw(s).
4 In case of more than two broken screw heads at one door have been
detected:
a Replace the door stop screw(s), refer to
- Ref. CMM 52-11-30 (D8518) for door 1 (LH/RH)
- Ref. CMM 52-12-30 (D8518) for doors 2 and 3 (LH/RH)
- Ref. CMM 52-13-30 (D8518) for door 4 (LH/RH).

### Page 23

A350
SERVICE BULLETIN
REV 00 Aug 13/21 A350-52-P043
Page 23
b Do an adjustment of the passenger door, refer to
- Ref. MP A350-A-52-1X-XX-00ZZZ-270Z-A for door 1 (LH/RH)
- Ref. MP A350-A-52-1X-XX-02ZZZ-270Z-A for doors 2 and 3 (LH/
RH)
- Ref. MP A350-A-52-1X-XX-03ZZZ-270Z-A for door 4 (LH/RH).
c Put a red mark on the replaced door stop screw(s).
(b) Send the broken door stop screw(s) to the subsequent address:
AIRBUS Operations GmbH
A350 Doors Department
Kreetslag 10
21129 Hamburg
Germany
NOTE: MSN, model, the impacted door and door side, and the exact door stop
screw position of each door must be provided.

### Page 24

A350
SERVICE BULLETIN
Figure ICN-A350-A-52XXP043-A-FAPE3-05VYE-A-001-01 Fig.BB Sol.AA SHEET 1/2
REV 00 Aug 13/21 A350-52-P043Door stop screw replacement
Page 24
CONF ALL
C C
Z831 Z832
Z833
Z834
Z841
Z842
Z843
Z844
A
A
TYPICAL TO ALL
PAX DOORS
B
FWDB
LH SHOWN
RH SYMMETRICAL
DOOR STOP 3
DOOR STOP 4
DOOR STOP 5
DOOR STOP 2
DOOR STOP 6
DOOR STOP 7
DOOR STOP 1
DOOR STOP 3
DOOR STOP 4
DOOR STOP 5
DOOR STOP 2
DOOR STOP 6
DOOR STOP 7
DOOR STOP 1
ICN-A350-A-52XXP043-A-FAPE3-05VYE-A-001-01

### Page 25

A350
SERVICE BULLETIN
Figure ICN-A350-A-52XXP043-A-FAPE3-05VYF-A-004-01 Fig.BB Sol.AA SHEET 2/2
REV 00 Aug 13/21 A350-52-P043Door stop screw replacement
Page 25
CONF ALL
APPLICABLE TO ALL
DOOR STOPS (1-7 LH/RH)
LH SHOWN
RH SYMMETRICALC
1
(1)
A
A
ICN-A350-A-52XXP043-A-FAPE3-05VYF-A-004-01

### Page 26

A350
SERVICE BULLETIN
REV 00 Aug 13/21 A350-52-P043
Page 26
(3) Task A350-A-52-XX-P043-02001-90AA-A (A350-A-52-XX-P043-02ZZZ-90AZ-A)
Complete the Inspection Report Sheet
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 0.25 h
Minimum Number of person 1
Elapsed Time 0.25 h
Referenced Information
Manuals/Drawings References/Sheets
ISI 00.00.00179
Procedure
Ref. Fig.RA Inspection report
(a) Complete the Inspection Report sheet.
(b) Send the completed Inspection Report sheet in accordance with Ref. ISI
00.00.00179.
NOTE: T o send the Inspection Report sheet is not Required for Compliance (RC).

### Page 27

A350
SERVICE BULLETIN
Figure ICN-A350-A-52XXP043-A-FAPE3-05ZIX-A-002-01 Fig.RA Sol.AA SHEET 1/4
REV 00 Aug 13/21 A350-52-P043Inspection report
Page 27
CONF ALL
INSPECTION
INSPECTION REPORT
SERVICE BULLETIN No :
A/C MSN :
FLIGHT CYCLES :
FLIGHT HOURS :
A350-52-P043
DATE OF INSPECTION :
INSPECTION METHOD :
GENERAL
INSPECTION
DETAILED
INSPECTION DETAILED
INSPECTION
VISUAL
SPECIAL
UPLOAD THE COMPLETED INSPECTION REPORT
SHEET IN ACCORDANCE WITH ISI 00.00.00179
FWD LH SHOWNRH SYMMETRICAL
ORIGINAL PAX DOOR 1 INSTALLED
YES* NO *IF YES, CURRENT P/N:
PAX DOOR 1 FINDING
DOOR STOP SCREW REPLACED
AND FC:
YES NO
YES NO
DOOR STOP FWD AFT
PAX DOOR L1
FWD AFT
PAX DOOR R1
1
2
3
4
5
6
7
FINDING LOCATION
DOOR STOP 3
DOOR STOP 4
DOOR STOP 5
DOOR STOP 2
DOOR STOP 6
DOOR STOP 7
DOOR STOP 1
PAX DOOR 1
REMARK
S/N:
ICN-A350-A-52XXP043-A-FAPE3-05ZIX-A-002-01

### Page 28

A350
SERVICE BULLETIN
Figure ICN-A350-A-52XXP043-A-FAPE3-05ZIY-A-002-01 Fig.RA Sol.AA SHEET 2/4
REV 00 Aug 13/21 A350-52-P043Inspection report
Page 28
CONF ALL
INSPECTION
INSPECTION REPORT
SERVICE BULLETIN No :
A/C MSN :
FLIGHT CYCLES :
FLIGHT HOURS :
A350-52-P043
DATE OF INSPECTION :
INSPECTION METHOD :
GENERAL
INSPECTION
DETAILED
INSPECTION DETAILED
INSPECTION
VISUAL
SPECIAL
UPLOAD THE COMPLETED INSPECTION REPORT
SHEET IN ACCORDANCE WITH ISI 00.00.00179
FWD LH SHOWNRH SYMMETRICAL
ORIGINAL PAX DOOR 2 INSTALLED
YES* NO *IF YES, CURRENT P/N:
PAX DOOR 2 FINDING
DOOR STOP SCREW REPLACED
AND FC:
YES NO
YES NO
DOOR STOP FWD AFT
PAX DOOR L2
FWD AFT
PAX DOOR R2
1
2
3
4
5
6
7
FINDING LOCATION
DOOR STOP 3
DOOR STOP 4
DOOR STOP 5
DOOR STOP 2
DOOR STOP 6
DOOR STOP 7
DOOR STOP 1
PAX DOOR 2
REMARK
S/N:
ICN-A350-A-52XXP043-A-FAPE3-05ZIY-A-002-01

### Page 29

A350
SERVICE BULLETIN
Figure ICN-A350-A-52XXP043-A-FAPE3-05ZIZ-A-002-01 Fig.RA Sol.AA SHEET 3/4
REV 00 Aug 13/21 A350-52-P043Inspection report
Page 29
CONF ALL
INSPECTION
INSPECTION REPORT
SERVICE BULLETIN No :
A/C MSN :
FLIGHT CYCLES :
FLIGHT HOURS :
A350-52-P043
DATE OF INSPECTION :
INSPECTION METHOD :
GENERAL
INSPECTION
DETAILED
INSPECTION DETAILED
INSPECTION
VISUAL
SPECIAL
UPLOAD THE COMPLETED INSPECTION REPORT
SHEET IN ACCORDANCE WITH ISI 00.00.00179
FWD LH SHOWNRH SYMMETRICAL
ORIGINAL PAX DOOR 3 INSTALLED
YES* NO *IF YES, CURRENT P/N:
PAX DOOR 3 FINDING
DOOR STOP SCREW REPLACED
AND FC:
YES NO
YES NO
DOOR STOP FWD AFT
PAX DOOR L3
FWD AFT
PAX DOOR R3
1
2
3
4
5
6
7
FINDING LOCATION
DOOR STOP 3
DOOR STOP 4
DOOR STOP 5
DOOR STOP 2
DOOR STOP 6
DOOR STOP 7
DOOR STOP 1
PAX DOOR 3
REMARK
S/N:
ICN-A350-A-52XXP043-A-FAPE3-05ZIZ-A-002-01

### Page 30

A350
SERVICE BULLETIN
Figure ICN-A350-A-52XXP043-A-FAPE3-05ZJ0-A-002-01 Fig.RA Sol.AA SHEET 4/4
REV 00 Aug 13/21 A350-52-P043Inspection report
Page 30
CONF ALL
INSPECTION
INSPECTION REPORT
SERVICE BULLETIN No :
A/C MSN :
FLIGHT CYCLES :
FLIGHT HOURS :
A350-52-P043
DATE OF INSPECTION :
INSPECTION METHOD :
GENERAL
INSPECTION
DETAILED
INSPECTION DETAILED
INSPECTION
VISUAL
SPECIAL
UPLOAD THE COMPLETED INSPECTION REPORT
SHEET IN ACCORDANCE WITH ISI 00.00.00179
FWD LH SHOWNRH SYMMETRICAL
ORIGINAL PAX DOOR 4 INSTALLED
YES* NO *IF YES, CURRENT P/N:
PAX DOOR 4 FINDING
DOOR STOP SCREW REPLACED
AND FC:
YES NO
YES NO
DOOR STOP FWD AFT
PAX DOOR L4
FWD AFT
PAX DOOR R4
1
2
3
4
5
6
7
FINDING LOCATION
DOOR STOP 3
DOOR STOP 4
DOOR STOP 5
DOOR STOP 2
DOOR STOP 6
DOOR STOP 7
DOOR STOP 1
PAX DOOR 4
REMARK
S/N:
ICN-A350-A-52XXP043-A-FAPE3-05ZJ0-A-002-01

### Page 31

A350
SERVICE BULLETIN
REV 00 Aug 13/21 A350-52-P043
Page 31
D. PREPARATION FOR TEST
None
E. TEST
None
F. CLOSE-UP
(1) Task A350-A-52-XX-P043-02001-900A-A (A350-A-52-XX-P043-02ZZZ-900Z-A)
Close-up
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
831
832
833
834
841
842
843
844
Manpower/Resources/Skills
Man-hours 2.00 h
Minimum Number of person 1
Elapsed Time 2.00 h
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-52-1X-XX-00ZZZ-133Z-AA350-A-52-1X-XX-01ZZZ-132Z-A
Procedure
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the special precautions after work on the passenger/crew doors, refer to Ref.
MP A350-A-52-1X-XX-00ZZZ-133Z-A.
(c) Close the passenger/crew doors, refer to Ref. MP A350-A-52-1X-XX-01ZZZ-132Z-
A.
(d) Put the aircraft back to its initial configuration.
G. ADMINISTRATIVE
(1) Task A350-A-52-XX-P043-01001-90AA-A (A350-A-52-XX-P043-01ZZZ-90AZ-A)
Administrative
Procedure
Confirm in the applicable aircraft records that you have completed all the work defined
in this Service Bulletin task set as required.

### Page 32

A350
SERVICE BULLETIN
APPENDIX
REV 00 Aug 13/21 A350-52-P043
Page 32
APPENDIX
A. REPORTING SHEET
TITLE: DOORS - PASSENGER/CREW - PAX DOOR STOP SCREW HEADS
DETACHED
MODIFICATION No.: None
(1) SB Reporting status
This Service Bulletin will only be incorporated into affected customized Maintenance
and Flight Operations Products if it is duly reported to Airbus.
(2) GENERAL information
The SB Reporting policy is published in ISI 00.00.00135. This document provides
information regarding: the SB Reporting means and benefits, the update of
customized Maintenance Products and customized Flight Operations Products.
If this Service Bulletin has an operational impact, refer to paragraph "Flight Operations
Products" for further information on the update of affected Flight Operations Products.
(3) SB Reporting procedure
Standard practice to report SB is to use the online reporting application on
AirbusWorld.
Refer to ISI 00.00.00179:
- For complete information on reporting means to Airbus, Question 2 "What are
the standard practices for SB Reporting?"
- If this SB requires previous or simultaneous accomplishment of other SBs,
Question 3 "What about the reporting of prerequisite Service Bulletins?"
NOTE: ISI 00.00.00179 covers all the frequently asked questions about SB Reporting.
It is revised on a regular basis.

### Page 33

A350
SERVICE BULLETIN
APPENDIX
REV 00 Aug 13/21 A350-52-P043
Page 33
B. QUALITY PERCEPTION FORM
Use this form to tell us what is your perception of the quality of this Service Bulletin.
The reported data that you provide us will be used to analyse areas of difficulties and to
take corrective action to further improve the quality of our Service Bulletin.
We thank you for the time you have taken in completing this form.
Quality rating of this SB 4 3 2 1
Quality rating of the Accomplishment Instructions 4 3 2 1
Quality rating of the Illustrations 4 3 2 1
Is this SB easy to understand ? Y / N
NOTE: Please rate on a scale of 1 to 4, with 4 being the highest score
If you have difficulties in the accomplishment of this SB please quote below the area(s) and
give a short description of the issue.
Planning Material Instructions
X Applicability X T ooling X Preparation
X Reason X List of Materials
Operator Supplied
X Mod/Inspection
X Manpower X Kit content X T est
X References X Re-identification X Close-up
X Publication X Illustrations
X Industry Support
Comments :
Operator : Date :
Name/Title
Please return this form to :
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
Or via your Resident Customer Support Office.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
