# Airbus Service Bulletin A350-53-P029

Copy: No revision named ("SB A350-53-P029"), 172 pages: PDF https://openairdocs.org/files/sha256/53/93/53938428c3742f30d8c8370d27b4b96e529c4bbdcf1eb4a6e6aa8572e2dcd2ed; text https://openairdocs.org/service-documents/airbus/a350-53-p029/file/53938428c374.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2018-0506; AD 2018-17-24 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A350-53-P029
- Page: https://openairdocs.org/service-documents/airbus/a350-53-p029

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2018-17-24](https://openairdocs.org/ad/2018-17-24.md), effective Oct 18, 2018: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/a350-53-p029/proposed.md).

## Text (172 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2018-0506; AD 2018-17-24 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 1
CONF ALL
AIRBUS S.A.S.
Customer Services
T echnical Data Support and Services
31703 Blagnac Cedex
FRANCE
 
The content of this document is the property of Airbus.
It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may information
contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of the
copyright. Requests for reproduction of any data in this document and the media authorized for it must
be addressed to Airbus.
MANDATORY MANDATORY MANDATORY
ATA SYSTEM: 53
TITLE: FUSELAGE - CONE/REAR FUSELAGE - IMPROVE PROTECTION FOR
MULTI MATERIAL JOINTS
MODIFICATION No.:
110281L80601

### Page 2

A350
SERVICE BULLETIN
SUMMARY
REV 00 Nov 17/17 A350-53-P029
Page 2
ATA SYSTEM: 53
TITLE: FUSELAGE - CONE/REAR FUSELAGE - IMPROVE PROTECTION FOR
MULTI MATERIAL JOINTS
SUMMARY
This summary is for information only and is not approved for modification of the aircraft.
A. MODIFICATIONS
MODIFICATION CLASSIFICATION
MAJOR None
MINOR 110281L80601
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
NOTE: This modification related to an Airworthiness issue has been classified by Airbus
and confirmed by EASA as minor in accordance with EU Part 21.A.91. As such, this
minor change is handled by Airbus under its Design Organisation Approval No.
EASA.21J.031.
B. REASON
(1) History
The rear fuselage cone structure between Frame 94 and Frame 102 has several
multi material joints between different parts (aluminium/titanium/CFRP (Carbon Fiber
Reinforced Plastic)) fitted with wet installed fasteners and interfay sealing. Both
corrosion protection types are not enough to avoid the risk of corrosion issues in
described areas. The affected areas are:
- jacking point
- Frame 98 lower beam
- Frame 98 upper beam
- upper corner fitting
- lower corner fitting
- Frame 95 reinforcements
- Frame 96 reinforcements
- beam —Stringer (STGR) joint part lower
- beam — STGR joint part upper
- STGRs 1 and 2 ( Frame 98 to Frame 102)
- door frame
- Frame 100 to Frame 102 bar upper
- Frame 100 to Frame 102 bar lower
(2) Objective/Action
This Service Bulletin improves the corrosion protection applying new sealant fillets and
Corrosion Preventive Compound (CPC) in affected areas.

### Page 3

A350
SERVICE BULLETIN
SUMMARY
REV 00 Nov 17/17 A350-53-P029
Page 3
(3) Advantages
The accomplishment of this Service Bulletin will prevent corrosion issues in the
protected areas.
(4) Operational/Maintenance Consequences
None
C. GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE MANDATORY (1) CANCELS INSPECTION SB NO
POTENTIAL AD YES A/C OPERATION AFFECTED NO
RELIABILITY AFFECTED NO PAX COMFORT AFFECTED NO
COST SAVING NO ETOPS AFFECTED NO
STRUCTURAL LIFE
EXTENSION
NO VENDOR SB NO
LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO
(1): Service Bulletin must be accomplished.
D. MAINTENANCE CONFIGURATION
None
E. MATERIAL PRICE INFORMATION
(1) Corrosion Protection of the Rear Fuselage Cone Structure
(a) T ask set A350-A-53-XX-P029-01000-93AA-A Corrosion Protection of the Rear
Fuselage Cone Structure
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS
Aircraft standard tools See SB See Note T ools
NOTE: Price information to be acquired by the given supplier.
F. APPLICABILITY
This Service Bulletin is applicable to this (these) operator(s):
CPA FIN HVN QTR SIA TAM
G. CONCURRENT REQUIREMENTS
None
H. NATURE OF THE WORK
(1) Corrosion Protection of the Rear Fuselage Cone Structure
(a) T ask set A350-A-53-XX-P029-01000-93AA-A Corrosion Protection of the Rear
Fuselage Cone Structure
AIRCRAFT YES
EQUIPMENT NO
I. MANPOWER

### Page 4

A350
SERVICE BULLETIN
SUMMARY
REV 00 Nov 17/17 A350-53-P029
Page 4
(1) Corrosion Protection of the Rear Fuselage Cone Structure
(a) T ask set A350-A-53-XX-P029-01000-93AA-A Corrosion Protection of the Rear
Fuselage Cone Structure
MANPOWER
TOTAL MAN-HOURS 34.50 h
ELAPSED TIME (HOURS) 20.25 h

### Page 5

A350
SERVICE BULLETIN
SUMMARY
Figure ICN-A350-A-53XXP029-A-FAPE3-03ET4-A-001-01 SHEET 1/1
REV 00 Nov 17/17 A350-53-P029General overview
Page 5
J. GENERAL OVERVIEW
CONF ALL
A
,  Z311 Z312
A
COMPOUND (CPC) ON AFFECTED AREAS
FR93
FR102
APPLY SEALANT BEAD AND CORROSION PREVENTIVE
AFFECTED AREAS NOT SHOWN01
NOTE:
01
ICN-A350-A-53XXP029-A-FAPE3-03ET4-A-001-01

### Page 6

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 6
ATA SYSTEM: 53
TITLE: FUSELAGE - CONE/REAR FUSELAGE - IMPROVE PROTECTION FOR
MULTI MATERIAL JOINTS
1. PLANNING INFORMATION
A. APPLICABILITY
NOTE: This modification is embodied before delivery on aircraft with Manufacturer Serial
Number (MSN) 0005.
NOTE: This Service Bulletin is only applicable to aircraft on which Mod. No. 106695L80352
(FUSELAGE - CONE/REAR FUSELAGE - INTRODUCE STEP1 IMPROVEMENTS IN S19) is
not embodied.
(1) Models
ON A/C 0006-0039
350-941
CONF ALL
(2) Applicability by MSN
0006-0039
(3) MSN by configuration
MSN CONFIGURATION
0006 0007 0008 0009 0010 0011 0012 0013 0014 0015 0016
0017 0018 0019 0020 0021 0022 0023 0024 0025 0026 0027
0028 0029 0030 0031 0032 0033 0034 0035 0036 0037 0038
0039
001
(4) Configuration definition
Configuration 001
CONF 001 is applicable for all the aircraft affected by this Service Bulletin as a
standard configuration.
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
The rear fuselage cone structure between Frame 94 and Frame 102 has several
multi material joints between different parts (aluminium/titanium/CFRP (Carbon Fiber
Reinforced Plastic)) fitted with wet installed fasteners and interfay sealing. Both
corrosion protection types are not enough to avoid the risk of corrosion issues in
described areas. The affected areas are:
- jacking point
- Frame 98 lower beam
- Frame 98 upper beam
- upper corner fitting
- lower corner fitting

### Page 7

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 7
- Frame 95 reinforcements
- Frame 96 reinforcements
- beam —Stringer (STGR) joint part lower
- beam — STGR joint part upper
- STGRs 1 and 2 ( Frame 98 to Frame 102)
- door frame
- Frame 100 to Frame 102 bar upper
- Frame 100 to Frame 102 bar lower
(2) Objective/Action
This Service Bulletin improves the corrosion protection applying new sealant fillets and
Corrosion Preventive Compound (CPC) in affected areas.
(3) Advantages
The accomplishment of this Service Bulletin will prevent corrosion issues in the
protected areas.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
T o accomplish this Service Bulletin it is necessary to:
(1) Corrosion Protection of the Rear Fuselage Cone Structure
(a) T ask set A350-A-53-XX-P029-01000-93AA-A Corrosion Protection of the Rear
Fuselage Cone Structure
1 Do the Protection at the Upper Corner fittings Area at LH FR102
2 Do the Protection at the Upper Corner fittings Area at RH FR102
3 Do the Protection at the Lower Corner fittings Area at LH FR102
4 Do the Protection at the Lower Corner fittings Area at RH FR102
5 Do the Protection of the LH and RH STGR1 and STGR2 between the FR98
and FR102
6 Do the Protection at the Upper Bar Area at FR100
7 Do the Protection at the Lower Bar Area at FR100
8 Do the Protection at the Upper Beam Area at LH FR98
9 Do the Protection at the Upper Beam Area at RH FR98
10 Do the Protection at the Lower Beam Area at LH FR98
11 Do the Protection at the Lower Beam Area at RH FR98
12 Do the Protection of the Jacking Point at FR98
13 Do the Protection at the Door Area at LH FR97
14 Do the Protection at the Door Area at RH FR97
15 Do the Protection at the Beam - STGR Joint Part Lower Area at LH FR96
16 Do the Protection at the Beam - STGR Joint Part Lower Area at RH FR96
17 Do the Protection at the Reinforcement Area at LH FR96

### Page 8

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 8
18 Do the Protection at the Reinforcement Area at RH FR96
19 Do the Protection at the Beam - STGR Joint Part Upper Area at LH FR96
20 Do the Protection at the Beam - STGR Joint Part Upper Area at RH FR96
21 Do the Protection at the Door Area at FR95
22 Do the Protection at the Door Area at LH FR98
23 Do the Protection at the Door Area at RH FR98
24 Do the Protection at the Door Area at LH FR95
25 Do the Protection at the Door Area at RH FR95
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
Accomplishment of this Service Bulletin must be done within 3 years from entry into
service.
This Service Bulletin has been classified Mandatory. It is expected that an
Airworthiness Directive (AD) published by the European Aviation Safety Agency (EASA)
will be issued to confirm this classification. It is anticipated that the AD will confirm the
threshold given above but reference should be made to the AD for confirmation of the
mandated accomplishment timescale.
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organisation Approval No. EASA.21J.031.
If an aircraft listed in the applicability has a modification or repair embodied that is not
of AIRBUS origin, and which affects the content of this Service Bulletin, the operator
is responsible for obtaining approval by its airworthiness authority for any adaptation
necessary before incorporation of the Service Bulletin.
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Corrosion Protection of the Rear Fuselage Cone Structure
(a) T ask set A350-A-53-XX-P029-01000-93AA-A Corrosion Protection of the Rear
Fuselage Cone Structure
PREPARATION
Job Set-up 2.00 h
PROCEDURE
Do the Protection at the Upper Corner fittings Area at LH
FR102
2.00 h
Do the Protection at the Upper Corner fittings Area at RH
FR102
2.00 h

### Page 9

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 9
Do the Protection at the Lower Corner fittings Area at LH
FR102
2.00 h
Do the Protection at the Lower Corner fittings Area at RH
FR102
2.00 h
Do the Protection of the LH and RH STGR1 and STGR2
between the FR98 and FR102
3.75 h
Do the Protection at the Upper Bar Area at FR100 0.50 h
Do the Protection at the Lower Bar Area at FR100 0.50 h
Do the Protection at the Upper Beam Area at LH FR98 2.25 h
Do the Protection at the Upper Beam Area at RH FR98 2.25 h
Do the Protection at the Lower Beam Area at LH FR98 2.00 h
Do the Protection at the Lower Beam Area at RH FR98 2.00 h
Do the Protection of the Jacking Point at FR98 0.75 h
Do the Protection at the Door Area at LH FR97 1.00 h
Do the Protection at the Door Area at RH FR97 1.00 h
Do the Protection at the Beam - STGR Joint Part Lower Area
at LH FR96
0.50 h
Do the Protection at the Beam - STGR Joint Part Lower Area
at RH FR96
0.50 h
Do the Protection at the Reinforcement Area at LH FR96 0.50 h
Do the Protection at the Reinforcement Area at RH FR96 0.50 h
Do the Protection at the Beam - STGR Joint Part Upper Area
at LH FR96
0.50 h
Do the Protection at the Beam - STGR Joint Part Upper Area
at RH FR96
0.50 h
Do the Protection at the Door Area at FR95 0.50 h
Do the Protection at the Door Area at LH FR98 0.50 h
Do the Protection at the Door Area at RH FR98 0.50 h
Do the Protection at the Door Area at LH FR95 0.50 h
Do the Protection at the Door Area at RH FR95 0.50 h
PREPARATION FOR TEST
Install Procedure 0.50 h
TEST
T est 0.50 h
CLOSE-UP
Close-up 2.00 h
TOTAL MAN-HOURS 34.50 h
ELAPSED TIME (HOURS) 20.25 h

### Page 10

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 10
NOTE: Please take into account the drying times between each product to
calculate the grounding time, the elapsed time does not take into
account the drying times for example:
- between adhesion promoter and sealant
- sealant tack free time
- varnish drying time
- Reference CML 12ABC1: drying time from 1 hour to 24 hours
- Reference CML 12AEB1: 2 coats to be applied minimum drying
time 30 minutes between 2 coats.
NOTE: For an explanation of the manhours and elapsed time, refer to the Gantt
Chart given in Appendix Appendix 01 - Manpower Gantt Chart.
H. WEIGHT AND BALANCE
The weight and balance estimates given in this Service Bulletin are based on the
Manufacturer's Empty Weight (MEW) and do not include operator's items. For the definition
of MEW and operator's items, refer to Ref. WBM.
Manufacturer's Empty Weight +0.690 kg (+1.521 lb)
Effect on Balance +44.230 kg.m (+319.916 lbf)
I. ELECTRICAL LOAD DATA
Not changed
J. REFERENCES
(1) Corrosion Protection of the Rear Fuselage Cone Structure
(a) T ask set A350-A-53-XX-P029-01000-93AA-A Corrosion Protection of the Rear
Fuselage Cone Structure
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-24-XX-01ZZZ-667Z-A
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
MAINTENANCE PROCEDURE (MP)
A350-A-12-XX-XX-02ZZZ-170Z-A A350-A-24-41-XX-00ZZZ-170Z-A
A350-A-36-12-61-06ZZZ-520Z-A
A350-A-36-12-61-06ZZZ-720Z-A
A350-A-52-1X-XX-00ZZZ-132Z-A
A350-A-52-1X-XX-01ZZZ-132Z-A
A350-A-53-51-61-00ZZZ-520Z-A
A350-A-53-51-61-00ZZZ-720Z-A
PROCESS AND MATERIAL SPECIFICATION (PMS)
01-02-60 01-02-102
01-02-106
WEIGHT AND BALANCE MANUAL (WBM)
CONSUMABLE MATERIAL LIST (CML)
K. PUBLICATION AFFECTED
None

### Page 11

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 11
L. INDUSTRY SUPPORT INFORMATION
AIRBUS will credit the man hours indicated in this Service Bulletin at the agreed in-house
warranty labor rate for claims received no later than 90 days after completion of the last
affected aircraft of your fleet, for the accomplishment of this Service Bulletin before Dec
31/19.

### Page 12

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 12
2. MATERIAL INFORMATION
A. MATERIAL APPLICABILITY
Material for task set A350-A-53-XX-P029-01000-93AA-A Corrosion Protection of
the Rear Fuselage Cone Structure
MATERIAL QTY SEE NOTES
Aircraft standard tools See SB
Referenced tools See SB
Consumables See SB
Referenced parts See SB
B. TOOLING
Aircraft standard tools for task set A350-A-53-XX-P029-01000-93AA-A Corrosion
Protection of the Rear Fuselage Cone Structure
Procurement address  
NOTE(S)
AIRBUS Material, Logistics and Suppliers
IFD - In Flight Desk
Weg beim Jaeger 150
D-22335
HAMBURG
GERMANY
Fax: +49 40 50 76 4012
E-mail: ifd.spares@airbus.com
Internet: http://spares.airbus.com
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
AIRBUS Material, Logistics and Suppliers
Weg beim Jaeger 150
D-22335
HAMBURG
GERMANY
Fax: +49 40 50 76 3225
E-mail: For ordering by E-mail: ool.LEASE@airbus.com
Internet: http://spares.airbus.com
Operators interested in the lease of standard tools should contact AIRBUS at the
address given above.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
98L27901001000 2 PIN
98V27401000000 1 LOCK
98V53509002000 1 PLATFORM
98V53509003000 1 PLATFORM
98V53509007000 1 NORCOS
Referenced tools for task set A350-A-53-XX-P029-01000-93AA-A Corrosion
Protection of the Rear Fuselage Cone Structure
NOTE: T o accomplish this Service Bulletin it is necessary to use the tools listed in the
subsequent referenced tasks:

### Page 13

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 13
Ref. MP A350-A-52-1X-XX-00ZZZ-132Z-A
Ref. MP A350-A-52-1X-XX-01ZZZ-132Z-A
Ref. MP A350-A-53-51-61-00ZZZ-520Z-A
Ref. MP A350-A-53-51-61-00ZZZ-720Z-A
C. CONSUMABLES
Consumables for task set A350-A-53-XX-P029-01000-93AA-A Corrosion Protection
of the Rear Fuselage Cone Structure
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
04QAB2 Coating - - FlexibleStructure
06ACB1 Polysulfide Sealant - LowDensity MultiPurpose Fillet
08BAA9 Non Aqueous Cleaner -General
12ABC1
Corrosion Preventive
Compound - Water
Displacing Soft Film
12AEB1
Corrosion Preventive
Compound - Heavy Duty
Long Durability Hard Film
D. LIST OF NEW PARTS
Referenced parts for task set A350-A-53-XX-P029-01000-93AA-A Corrosion
Protection of the Rear Fuselage Cone Structure
NOTE: T o accomplish this Service Bulletin It is necessary to use the expendable parts listed
in the subsequent reference tasks.
Ref. MP A350-A-36-12-61-06ZZZ-720Z-A
E. LIST OF EXISTING PARTS
No removed parts

### Page 14

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 14
3. ACCOMPLISHMENT INSTRUCTIONS
Task set A350-A-53-XX-P029-01000-93AA-A
Corrosion Protection of the Rear Fuselage Cone Structure
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL
WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND MECHANICALLY
SERVICEABLE). WHEN YOU DO A MAINTENANCE WORK, REPAIRS OR
MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND
THE WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING OR COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND
DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO Ref. ESP A350-A-20-55-
XX-01ZZZ-042Z-A.
NOTE: The accomplishment instructions of this Service Bulletin include procedures given in
other documents or in other sections of the Service Bulletin. When the words “refer to”
are used and the operator has a procedure accepted by the local authority he belongs to,
the accepted alternative procedure can be used. When the words “in accordance with”
are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service Bulletin.
Operators can therefore, as deemed necessary, omit or add access and/or close-up steps
to add flexibility to their maintenance operations as long as the technical intent of the
Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms. Refer
to paragraph 1.J., References, for the definition of acronyms.
NOTE: This Service Bulletin is classified mandatory or expected to be classified mandatory by
an Airworthiness Directive (AD). The paragraphs 3.C. and 3.E. in these accomplishment
instructions are Required for Compliance (RC) and must be done to comply with the AD.
T o allow more flexibility, the rule "refer to" and "in accordance with" will apply to these
paragraphs 3.C. and 3.E. Other paragraphs are recommended and may be deviated from,
done as part of other actions or done with accepted methods different from those given
in the Service Bulletin, as long as the RC paragraphs can be done and the aircraft can be
put back into a serviceable condition.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance necessary
to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions contained herein, contact AIRBUS for further
instructions and approval.
A. TASK SET ASSOCIATED INFORMATION
Task Manpower
TOTAL MAN-HOURS 34.50h
ELAPSED TIME (HOURS) 20.25h

### Page 15

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 15
B. PREPARATION
(1) Task A350-A-53-XX-P029-01001-540A-A - Job Set-up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 2.00h
Minimum Number of person 2
Elapsed Time 1.00h
Material necessary to do the job
Aircraft standard tools
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
98L27901001000 2 PIN
98V27401000000 1 LOCK
98V53509002000 1 PLATFORM
98V53509003000 1 PLATFORM
98V53509007000 1 NORCOS
Referenced Information
Manuals/Drawings References/Sheets
MP
A350-A-12-XX-XX-02ZZZ-170Z-A
A350-A-24-41-XX-00ZZZ-170Z-A
A350-A-36-12-61-06ZZZ-520Z-A
A350-A-52-1X-XX-00ZZZ-132Z-A
A350-A-53-51-61-00ZZZ-520Z-A
Procedure
NOTE: For the basic Aircraft configuration, refer to MP A350-A-00-6X-XX-11001-018A-
D “Introductions”.
(a) Make sure that the aircraft is electrically grounded, refer to Ref. MP A350-
A-24-41-XX-00ZZZ-170Z-A.
(b) Put an access platform in position at the Zone 311, Zone 312 , Zone 314 and
Zone 831.
(c) Open the Door 1L passenger/crew door, refer to Ref. MP A350-A-52-1X-
XX-00ZZZ-132Z-A.
(d) Open the access Door 311AB, Door 311BB and Door 314AR.
(e) Open, safety/lock and tag this (these) circuit breaker(s):
ON A/C 0006-0039
PANEL DESIGNATION FIN LOCATION SEE NOTES
EPDC1 C/B-PRIM 1 2001CE 3HZ11
PANEL DESIGNATION FIN LOCATION SEE NOTES
EPDC2 C/B-PRIM 2 2002CE 4HZ10
PANEL DESIGNATION FIN LOCATION SEE NOTES
EPDC1 C/B-SEC 1 2003CE 3HB05

### Page 16

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 16
PANEL DESIGNATION FIN LOCATION SEE NOTES
EPDC2 C/B-SEC 2 2004CE 4HB01
PANEL DESIGNATION FIN LOCATION SEE NOTES
EPDC1 C/B-PRIM 3 1005CE 1KZ10
PANEL DESIGNATION FIN LOCATION SEE NOTES
EPDC1 C/B-SEC 3 1007CE 1KZ12
CONF ALL
(f) Safety precautions:
1 Install
2 PIN,LOCKING-SIDE
STICK
98L27901001000  
on the captain and first officer side sticks.
2 On the center pedestal, on the pitch trim section of control panel ( FIN
115VM), install
1 LOCK TOOL - PITCH
TRIM SWITCHES
98V27401000000  
on the pitch trim control-switches.
3 On the Left Hand (LH) and Right Hand (RH) lateral consoles, put a warning
notice(s) in position to tell persons not to operate the side stick.
4 On the center pedestal, on the pitch trim section of control panel ( FIN
115VM), put a warning notice(s) in position to tell persons not to operate
the pitch trim control-switches.
WARNING: BEFORE YOU START WORK, YOU MUST PUT ON A
SAFETY HARNESS AND ATTACH IT TO THE ACCESS
PLATFORM. WITHOUT A SAFETY HARNESS, YOU CAN
FALL. THIS CAN KILL YOU OR CAUSE YOU INJURY.
5 Put on and attach a safety harness before you start work in the area, refer
to Ref. MP A350-A-12-XX-XX-02ZZZ-170Z-A.
(g) If necessary, remove the cut-out covers Panel 311AL, Panel 311BL, Panel 312AR
and Panel 312BR, refer to Ref. MP A350-A-53-51-61-00ZZZ-520Z-A.
CAUTION: WHEN YOU GET ACCESS TO THE REAR FUSELAGE THROUGH
MAINTENANCE PANEL 311AB, DO NOT:
- PUT YOUR FEET ON THE APU FUEL LINE
- USE THE APU FUEL LINE AS A HANDLE.
IF YOU DO NOT OBEY THESE INSTRUCTIONS, YOU WILL
CAUSE DAMAGE TO THE APU FUEL LINE.
(h) Open the access Door 311AB, Door 311BB and Door 314AR.
(i) Install the tools to access to the work areas.
1 CENTRAL PLATFORM-
S19
98V53509002000  
1 S19 REAR PLATFORM 98V53509003000  
1 NORCOS - S19, FR96 98V53509007000

### Page 17

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 17
(j) If necessary, remove the Auxiliary Power Unit (APU) bleed-air duct to access to
the LH side work area, refer to Ref. MP A350-A-36-12-61-06ZZZ-520Z-A.
(k) If necessary, undo wiring from clamps without disconnection of the connectors
when required for access.
(l) Protect all the wirings, system parts and mechanical parts concerned by the
work area.
C. PROCEDURE
(1) Task A350-A-53-XX-P029-01001-250A-A - Do the Protection at the Upper
Corner fittings Area at LH FR102
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
Access Door 314ARPanel 311BL311
Work location Frame102
Manpower/Resources/Skills
Man-hours 2.00h
Minimum Number of person 1
Elapsed Time 2.00h
Skills Airframe
Material necessary to do the job
Consumables
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
04QAB2 Coating - - FlexibleStructure
06ACB1 Polysulfide Sealant - LowDensity MultiPurpose Fillet
08BAA9 Non Aqueous Cleaner -General
12ABC1
Corrosion Preventive
Compound - Water
Displacing Soft Film
12AEB1
Corrosion Preventive
Compound - Heavy Duty
Long Durability Hard Film
Referenced Information
Manuals/Drawings References/Sheets
ASR A350-A-51-24-XX-01ZZZ-667Z-A
CML CONSUMABLE MATERIAL LIST (CML)
PMS
01-02-102
01-02-106
01-02-60
Procedure

### Page 18

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 18
(a) Do the protection at the upper corner fitting area at Left Hand (LH) Frame 102.
Refer to Ref. Fig. Protection at the Upper Corner Fittings Area at LH and RH
FR102
Apply sealant in accordance with Ref. ASR A350-A-51-24-XX-01ZZZ-667Z-A.
For the application of corrosion preventive temporary protection compounds,
refer to Ref. PMS 01-02-60.
For the coating with paint, refer to Ref. PMS 01-02-102.
For the sealing of aircraft structure, refer to Ref. PMS 01-02-106.
For the specification of Material application codes given in this Service Bulletin,
refer to Ref. CML.
1 Clean the work area with:
  Non Aqueous Cleaner -
General
08BAA9  
2 Do the sealant bead with:
  Polysulfide Sealant
- Low Density
MultiPurpose Fillet
06ACB1  
NOTE: Use the adhesion promoter only on unpainted composite areas.
3 Coat the sealant bead with:
  Coating - - Flexible
Structure
04QAB2  
4 Apply corrosion preventive compound:
  Corrosion Preventive
Compound - Water
Displacing Soft Film
12ABC1  
  Corrosion Preventive
Compound - Heavy
Duty Long Durability
Hard Film
12AEB1

### Page 19

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03EQZ-A-001-01 SHEET 1/4
REV 00 Nov 17/17 A350-53-P029Protection at the Upper Corner
Fittings Area at LH and RH FR102 Page 19
CONF ALL
FR102
 - Z311 Z312
FR93
B
A
A
B
FR102
FR94
FR95FR96
FR97
FR98
FR101FR102 C
D
LH SHOWN
RH SYMMETRICAL
ICN-A350-A-53XXP029-A-FAPE3-03EQZ-A-001-01

### Page 20

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ER0-A-003-01 SHEET 2/4
REV 00 Nov 17/17 A350-53-P029Protection at the Upper Corner
Fittings Area at LH and RH FR102 Page 20
CONF ALL
SEALANT BEAD
C
FR102
FR101
STGR6LH
D
FR102
SEALANT BEAD
STGR6LH
FR101
E
ICN-A350-A-53XXP029-A-FAPE3-03ER0-A-003-01

### Page 21

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ER1-A-003-01 SHEET 3/4
REV 00 Nov 17/17 A350-53-P029Protection at the Upper Corner
Fittings Area at LH and RH FR102 Page 21
CONF ALL
04
MIN 25 mm
MIN (0.984 in)
MIN 25 mm
MIN (0.984 in)
APPLY MATERIAL No 06ACB101
NOTE:
APPLY MATERIAL No 04QAB202
03 APPLY MATERIAL No 12ABC1
FR102
MIN 25 mm
MIN (0.984 in)
MIN 25 mm
MIN (0.984 in)
MIN 25 mm
MIN (0.984 in)
105 mm
(4.134 in)
150 mm
(5.906 in)
SEALANT BEAD
PROTECTION AREA
SEALANT BEAD
04 APPLY MATERIAL No 12AEB1
02 03
01
E FWD
A A FWD
C
C
RESPECT DRYING TIME BETWEEN05
EACH MATERIAL APPLICATION
B
B
B B
A A
B
B
050505
05
STGR6LH
ICN-A350-A-53XXP029-A-FAPE3-03ER1-A-003-01

### Page 22

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ER2-A-003-01 SHEET 4/4
REV 00 Nov 17/17 A350-53-P029Protection at the Upper Corner
Fittings Area at LH and RH FR102 Page 22
CONF ALL
05
MIN 25 mm
MIN (0.984 in)
MIN 25 mm
MIN (0.984 in)
APPLY MATERIAL No 06ACB101
NOTE:
APPLY MATERIAL No 04QAB202
03 APPLY MATERIAL No 12ABC1
04 APPLY MATERIAL No 12AEB1
05
0505 05
05
MIN 25 mm
MIN (0.984 in)
MIN 25 mm
MIN (0.984 in)
VALID ALL ALONG SPLICE CONTOUR
TYPICAL
ONLY VALID FOR AREA WHERE SEALANT
TYPICAL
BEAD IS NOT APPLIED
C C
B B
RESPECT DRYING TIME BETWEEN05
EACH MATERIAL APPLICATION
01
02 03 04
04 03
ICN-A350-A-53XXP029-A-FAPE3-03ER2-A-003-01

### Page 23

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 23
(2) Task A350-A-53-XX-P029-02001-250A-A - Do the Protection at the Upper
Corner fittings Area at RH FR102
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
Access Door 314ARPanel 312BR312
Work location Frame102
Manpower/Resources/Skills
Man-hours 2.00h
Minimum Number of person 1
Elapsed Time 2.00h
Skills Airframe
Material necessary to do the job
Consumables
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
04QAB2 Coating - - FlexibleStructure
06ACB1 Polysulfide Sealant - LowDensity MultiPurpose Fillet
08BAA9 Non Aqueous Cleaner -General
12ABC1
Corrosion Preventive
Compound - Water
Displacing Soft Film
12AEB1
Corrosion Preventive
Compound - Heavy Duty
Long Durability Hard Film
Referenced Information
Manuals/Drawings References/Sheets
ASR A350-A-51-24-XX-01ZZZ-667Z-A
CML CONSUMABLE MATERIAL LIST (CML)
PMS
01-02-102
01-02-106
01-02-60
Procedure
(a) Do the protection at the upper corner fitting area at Right Hand (RH) Frame 102.
Refer to Ref. Fig. Protection at the Upper Corner Fittings Area at LH and RH
FR102
Apply sealant in accordance with Ref. ASR A350-A-51-24-XX-01ZZZ-667Z-A.
Apply sealant in accordance with Ref. ASR A350-A-51-24-XX-01ZZZ-667Z-A.
For the application of corrosion preventive temporary protection compounds,
refer to Ref. PMS 01-02-60.
For the coating with paint, refer to Ref. PMS 01-02-102.
For the sealing of aircraft structure, refer to Ref. PMS 01-02-106.

### Page 24

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 24
For the specification of Material application codes given in this Service Bulletin,
refer to Ref. CML.
1 Clean the work area with:
  Non Aqueous Cleaner -
General
08BAA9  
2 Do the sealant bead with:
  Polysulfide Sealant
- Low Density
MultiPurpose Fillet
06ACB1  
NOTE: Use the adhesion promoter only on unpainted composite areas.
3 Coat the sealant bead with:
  Coating - - Flexible
Structure
04QAB2  
4 Apply corrosion preventive compound:
  Corrosion Preventive
Compound - Water
Displacing Soft Film
12ABC1  
  Corrosion Preventive
Compound - Heavy
Duty Long Durability
Hard Film
12AEB1

### Page 25

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03EQZ-A-001-01 SHEET 1/4
REV 00 Nov 17/17 A350-53-P029Protection at the Upper Corner
Fittings Area at LH and RH FR102 Page 25
CONF ALL
FR102
 - Z311 Z312
FR93
B
A
A
B
FR102
FR94
FR95FR96
FR97
FR98
FR101FR102 C
D
LH SHOWN
RH SYMMETRICAL
ICN-A350-A-53XXP029-A-FAPE3-03EQZ-A-001-01

### Page 26

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ER0-A-003-01 SHEET 2/4
REV 00 Nov 17/17 A350-53-P029Protection at the Upper Corner
Fittings Area at LH and RH FR102 Page 26
CONF ALL
SEALANT BEAD
C
FR102
FR101
STGR6LH
D
FR102
SEALANT BEAD
STGR6LH
FR101
E
ICN-A350-A-53XXP029-A-FAPE3-03ER0-A-003-01

### Page 27

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ER1-A-003-01 SHEET 3/4
REV 00 Nov 17/17 A350-53-P029Protection at the Upper Corner
Fittings Area at LH and RH FR102 Page 27
CONF ALL
04
MIN 25 mm
MIN (0.984 in)
MIN 25 mm
MIN (0.984 in)
APPLY MATERIAL No 06ACB101
NOTE:
APPLY MATERIAL No 04QAB202
03 APPLY MATERIAL No 12ABC1
FR102
MIN 25 mm
MIN (0.984 in)
MIN 25 mm
MIN (0.984 in)
MIN 25 mm
MIN (0.984 in)
105 mm
(4.134 in)
150 mm
(5.906 in)
SEALANT BEAD
PROTECTION AREA
SEALANT BEAD
04 APPLY MATERIAL No 12AEB1
02 03
01
E FWD
A A FWD
C
C
RESPECT DRYING TIME BETWEEN05
EACH MATERIAL APPLICATION
B
B
B B
A A
B
B
050505
05
STGR6LH
ICN-A350-A-53XXP029-A-FAPE3-03ER1-A-003-01

### Page 28

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ER2-A-003-01 SHEET 4/4
REV 00 Nov 17/17 A350-53-P029Protection at the Upper Corner
Fittings Area at LH and RH FR102 Page 28
CONF ALL
05
MIN 25 mm
MIN (0.984 in)
MIN 25 mm
MIN (0.984 in)
APPLY MATERIAL No 06ACB101
NOTE:
APPLY MATERIAL No 04QAB202
03 APPLY MATERIAL No 12ABC1
04 APPLY MATERIAL No 12AEB1
05
0505 05
05
MIN 25 mm
MIN (0.984 in)
MIN 25 mm
MIN (0.984 in)
VALID ALL ALONG SPLICE CONTOUR
TYPICAL
ONLY VALID FOR AREA WHERE SEALANT
TYPICAL
BEAD IS NOT APPLIED
C C
B B
RESPECT DRYING TIME BETWEEN05
EACH MATERIAL APPLICATION
01
02 03 04
04 03
ICN-A350-A-53XXP029-A-FAPE3-03ER2-A-003-01

### Page 29

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 29
(3) Task A350-A-53-XX-P029-03001-250A-A - Do the Protection at the Lower
Corner fittings Area at LH FR102
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
Access Door 314ARPanel 311AL311
Work location Frame102
Manpower/Resources/Skills
Man-hours 2.00h
Minimum Number of person 1
Elapsed Time 2.00h
Skills Airframe
Material necessary to do the job
Consumables
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
04QAB2 Coating - - FlexibleStructure
06ACB1 Polysulfide Sealant - LowDensity MultiPurpose Fillet
08BAA9 Non Aqueous Cleaner -General
12ABC1
Corrosion Preventive
Compound - Water
Displacing Soft Film
12AEB1
Corrosion Preventive
Compound - Heavy Duty
Long Durability Hard Film
Referenced Information
Manuals/Drawings References/Sheets
ASR A350-A-51-24-XX-01ZZZ-667Z-A
CML CONSUMABLE MATERIAL LIST (CML)
PMS
01-02-102
01-02-106
01-02-60
Procedure
(a) Do the protection at the lower corner fitting area at LH Frame 102.
Refer to Ref. Fig. Protection at the Lower Corner Fittings Area at LH and RH FR102
Apply sealant in accordance with Ref. ASR A350-A-51-24-XX-01ZZZ-667Z-A.
Apply sealant in accordance with Ref. ASR A350-A-51-24-XX-01ZZZ-667Z-A.
For the application of corrosion preventive temporary protection compounds,
refer to Ref. PMS 01-02-60.
For the coating with paint, refer to Ref. PMS 01-02-102.
For the sealing of aircraft structure, refer to Ref. PMS 01-02-106.

### Page 30

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 30
For the specification of Material application codes given in this Service Bulletin,
refer to Ref. CML.
1 Clean the work area with:
  Non Aqueous Cleaner -
General
08BAA9  
2 Do the sealant bead with:
  Polysulfide Sealant
- Low Density
MultiPurpose Fillet
06ACB1  
NOTE: Use the adhesion promoter only on unpainted composite areas.
3 Coat the sealant bead with:
  Coating - - Flexible
Structure
04QAB2  
4 Apply corrosion preventive compound:
  Corrosion Preventive
Compound - Water
Displacing Soft Film
12ABC1  
  Corrosion Preventive
Compound - Heavy
Duty Long Durability
Hard Film
12AEB1

### Page 31

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ER3-A-001-01 SHEET 1/5
REV 00 Nov 17/17 A350-53-P029Protection at the Lower Corner
Fittings Area at LH and RH FR102 Page 31
CONF ALL
FR102
 - Z311 Z312
FR93
B
A
A
FR102
FR94
FR102
LH SHOWN
RH SYMMETRICAL
FR98 FR97 FR96 FR95
FR101
C
B
D F
ICN-A350-A-53XXP029-A-FAPE3-03ER3-A-001-01

### Page 32

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ER4-A-003-01 SHEET 2/5
REV 00 Nov 17/17 A350-53-P029Protection at the Lower Corner
Fittings Area at LH and RH FR102 Page 32
CONF ALL
SEALANT BEAD
C
D
FR102
SEALANT BEAD
FR102 FR101
E
STGR17LH
ICN-A350-A-53XXP029-A-FAPE3-03ER4-A-003-01

### Page 33

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ER5-A-003-01 SHEET 3/5
REV 00 Nov 17/17 A350-53-P029Protection at the Lower Corner
Fittings Area at LH and RH FR102 Page 33
CONF ALL
SEALANT BEAD
E
FR102
ICN-A350-A-53XXP029-A-FAPE3-03ER5-A-003-01

### Page 34

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ER6-A-003-01 SHEET 4/5
REV 00 Nov 17/17 A350-53-P029Protection at the Lower Corner
Fittings Area at LH and RH FR102 Page 34
CONF ALL
04
MIN 25 mm
MIN (0.984 in)
MIN 25 mm
MIN (0.984 in)
05 05
01
FWD
A A FWD
FR102
MIN 25 mm
MIN (0.984 in)MIN 25 mmMIN (0.984 in)
MIN 25 mm
MIN (0.984 in)
105 mm
(4.134 in)
150 mm
(5.906 in)
PROTECTION AREA
SEALANT BEAD
B
B
SEALANT BEAD
B B
C
C
B
B
A A
F
APPLY MATERIAL No 06ACB101
NOTE:
APPLY MATERIAL No 04QAB202
03 APPLY MATERIAL No 12ABC1
04 APPLY MATERIAL No 12AEB1
RESPECT DRYING TIME BETWEEN05
EACH MATERIAL APPLICATION
05
0302
05
STGR17LH
ICN-A350-A-53XXP029-A-FAPE3-03ER6-A-003-01

### Page 35

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ER7-A-003-01 SHEET 5/5
REV 00 Nov 17/17 A350-53-P029Protection at the Lower Corner
Fittings Area at LH and RH FR102 Page 35
CONF ALL
05
MIN 25 mm
MIN (0.984 in)
MIN 25 mm
MIN (0.984 in)
APPLY MATERIAL No 06ACB101
NOTE:
APPLY MATERIAL No 04QAB202
03 APPLY MATERIAL No 12ABC1
04 APPLY MATERIAL No 12AEB1
05
0505 05
05
MIN 25 mm
MIN (0.984 in)
MIN 25 mm
MIN (0.984 in)
VALID ALL ALONG SPLICE CONTOUR
TYPICAL
ONLY VALID FOR AREA WHERE SEALANT
TYPICAL
BEAD IS NOT APPLIED
C C
B B
RESPECT DRYING TIME BETWEEN05
EACH MATERIAL APPLICATION
04 03
040302
01
ICN-A350-A-53XXP029-A-FAPE3-03ER7-A-003-01

### Page 36

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 36
(4) Task A350-A-53-XX-P029-04001-250A-A - Do the Protection at the Lower
Corner fittings Area at RH FR102
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
Access Door 314ARPanel 312AR312
Work location Frame102
Manpower/Resources/Skills
Man-hours 2.00h
Minimum Number of person 1
Elapsed Time 2.00h
Skills Airframe
Material necessary to do the job
Consumables
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
04QAB2 Coating - - FlexibleStructure
06ACB1 Polysulfide Sealant - LowDensity MultiPurpose Fillet
08BAA9 Non Aqueous Cleaner -General
12ABC1
Corrosion Preventive
Compound - Water
Displacing Soft Film
12AEB1
Corrosion Preventive
Compound - Heavy Duty
Long Durability Hard Film
Referenced Information
Manuals/Drawings References/Sheets
ASR A350-A-51-24-XX-01ZZZ-667Z-A
CML CONSUMABLE MATERIAL LIST (CML)
PMS
01-02-102
01-02-106
01-02-60
Procedure
(a) Do the protection at the lower corner fitting area at RH Frame 102.
Refer to Ref. Fig. Protection at the Lower Corner Fittings Area at LH and RH FR102
Apply sealant in accordance with Ref. ASR A350-A-51-24-XX-01ZZZ-667Z-A.
Apply sealant in accordance with Ref. ASR A350-A-51-24-XX-01ZZZ-667Z-A.
For the application of corrosion preventive temporary protection compounds,
refer to Ref. PMS 01-02-60.
For the coating with paint, refer to Ref. PMS 01-02-102.
For the sealing of aircraft structure, refer to Ref. PMS 01-02-106.

### Page 37

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 37
For the specification of Material application codes given in this Service Bulletin,
refer to Ref. CML.
1 Clean the work area with:
  Non Aqueous Cleaner -
General
08BAA9  
2 Do the sealant bead with:
  Polysulfide Sealant
- Low Density
MultiPurpose Fillet
06ACB1  
NOTE: Use the adhesion promoter only on unpainted composite areas.
3 Coat the sealant bead with:
  Coating - - Flexible
Structure
04QAB2  
4 Apply corrosion preventive compound:
  Corrosion Preventive
Compound - Water
Displacing Soft Film
12ABC1  
  Corrosion Preventive
Compound - Heavy
Duty Long Durability
Hard Film
12AEB1

### Page 38

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ER3-A-001-01 SHEET 1/5
REV 00 Nov 17/17 A350-53-P029Protection at the Lower Corner
Fittings Area at LH and RH FR102 Page 38
CONF ALL
FR102
 - Z311 Z312
FR93
B
A
A
FR102
FR94
FR102
LH SHOWN
RH SYMMETRICAL
FR98 FR97 FR96 FR95
FR101
C
B
D F
ICN-A350-A-53XXP029-A-FAPE3-03ER3-A-001-01

### Page 39

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ER4-A-003-01 SHEET 2/5
REV 00 Nov 17/17 A350-53-P029Protection at the Lower Corner
Fittings Area at LH and RH FR102 Page 39
CONF ALL
SEALANT BEAD
C
D
FR102
SEALANT BEAD
FR102 FR101
E
STGR17LH
ICN-A350-A-53XXP029-A-FAPE3-03ER4-A-003-01

### Page 40

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ER5-A-003-01 SHEET 3/5
REV 00 Nov 17/17 A350-53-P029Protection at the Lower Corner
Fittings Area at LH and RH FR102 Page 40
CONF ALL
SEALANT BEAD
E
FR102
ICN-A350-A-53XXP029-A-FAPE3-03ER5-A-003-01

### Page 41

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ER6-A-003-01 SHEET 4/5
REV 00 Nov 17/17 A350-53-P029Protection at the Lower Corner
Fittings Area at LH and RH FR102 Page 41
CONF ALL
04
MIN 25 mm
MIN (0.984 in)
MIN 25 mm
MIN (0.984 in)
05 05
01
FWD
A A FWD
FR102
MIN 25 mm
MIN (0.984 in)MIN 25 mmMIN (0.984 in)
MIN 25 mm
MIN (0.984 in)
105 mm
(4.134 in)
150 mm
(5.906 in)
PROTECTION AREA
SEALANT BEAD
B
B
SEALANT BEAD
B B
C
C
B
B
A A
F
APPLY MATERIAL No 06ACB101
NOTE:
APPLY MATERIAL No 04QAB202
03 APPLY MATERIAL No 12ABC1
04 APPLY MATERIAL No 12AEB1
RESPECT DRYING TIME BETWEEN05
EACH MATERIAL APPLICATION
05
0302
05
STGR17LH
ICN-A350-A-53XXP029-A-FAPE3-03ER6-A-003-01

### Page 42

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ER7-A-003-01 SHEET 5/5
REV 00 Nov 17/17 A350-53-P029Protection at the Lower Corner
Fittings Area at LH and RH FR102 Page 42
CONF ALL
05
MIN 25 mm
MIN (0.984 in)
MIN 25 mm
MIN (0.984 in)
APPLY MATERIAL No 06ACB101
NOTE:
APPLY MATERIAL No 04QAB202
03 APPLY MATERIAL No 12ABC1
04 APPLY MATERIAL No 12AEB1
05
0505 05
05
MIN 25 mm
MIN (0.984 in)
MIN 25 mm
MIN (0.984 in)
VALID ALL ALONG SPLICE CONTOUR
TYPICAL
ONLY VALID FOR AREA WHERE SEALANT
TYPICAL
BEAD IS NOT APPLIED
C C
B B
RESPECT DRYING TIME BETWEEN05
EACH MATERIAL APPLICATION
04 03
040302
01
ICN-A350-A-53XXP029-A-FAPE3-03ER7-A-003-01

### Page 43

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 43
(5) Task A350-A-53-XX-P029-05001-250A-A - Do the Protection of the LH and RH
STGR1 and STGR2 between the FR98 and FR102
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
Access Door 311AB, Door 311BB, Door 314AR
311 Work location From Frame98 to Frame102From Stringer2 LH to Stringer2 RH
Manpower/Resources/Skills
Man-hours 3.75h
Minimum Number of person 1
Elapsed Time 3.75h
Skills Airframe
Material necessary to do the job
Consumables
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
04QAB2 Coating - - FlexibleStructure
06ACB1 Polysulfide Sealant - LowDensity MultiPurpose Fillet
08BAA9 Non Aqueous Cleaner -General
12ABC1
Corrosion Preventive
Compound - Water
Displacing Soft Film
12AEB1
Corrosion Preventive
Compound - Heavy Duty
Long Durability Hard Film
Referenced Information
Manuals/Drawings References/Sheets
ASR A350-A-51-24-XX-01ZZZ-667Z-A
CML CONSUMABLE MATERIAL LIST (CML)
PMS
01-02-102
01-02-106
01-02-60
Procedure
(a) Do the protection at the LH and RH STGR1 and STGR2 between the Frame 98
and Frame 102.
Refer to Ref. Fig. Protection of the LH and RH STGR1 and STGR2 between the
FR98 and FR102
Apply sealant in accordance with Ref. ASR A350-A-51-24-XX-01ZZZ-667Z-A.
Apply sealant in accordance with Ref. ASR A350-A-51-24-XX-01ZZZ-667Z-A.
For the application of corrosion preventive temporary protection compounds,
refer to Ref. PMS 01-02-60.
For the coating with paint, refer to Ref. PMS 01-02-102.

### Page 44

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 44
For the sealing of aircraft structure, refer to Ref. PMS 01-02-106.
For the specification of Material application codes given in this Service Bulletin,
refer to Ref. CML.
1 Clean the work area with:
  Non Aqueous Cleaner -
General
08BAA9  
2 Do the sealant bead with:
  Polysulfide Sealant
- Low Density
MultiPurpose Fillet
06ACB1  
NOTE: Use the adhesion promoter only on unpainted composite areas.
3 Coat the sealant bead with:
  Coating - - Flexible
Structure
04QAB2  
4 Apply corrosion preventive compound:
  Corrosion Preventive
Compound - Water
Displacing Soft Film
12ABC1  
  Corrosion Preventive
Compound - Heavy
Duty Long Durability
Hard Film
12AEB1

### Page 45

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ER8-A-001-01 SHEET 1/4
REV 00 Nov 17/17 A350-53-P029Protection of the LH and RH STGR1
and STGR2 between FR98 and FR102 Page 45
CONF ALL
FR102
 - Z311 Z312
FR93
A
A
B C
FR102
FR101
FR100
FR99
ICN-A350-A-53XXP029-A-FAPE3-03ER8-A-001-01

### Page 46

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ER9-A-003-01 SHEET 2/4
REV 00 Nov 17/17 A350-53-P029Protection of the LH and RH STGR1
and STGR2 between FR98 and FR102 Page 46
CONF ALL
SEALANT BEAD
FR102
FR98
STGR2RH STGR2LH
STGR1LHSTGR1RH
FR101
FR100
FR99
VIEW LOOKING UP
B
F
W
D
ICN-A350-A-53XXP029-A-FAPE3-03ER9-A-003-01

### Page 47

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ERA-A-003-01 SHEET 3/4
REV 00 Nov 17/17 A350-53-P029Protection of the LH and RH STGR1
and STGR2 between FR98 and FR102 Page 47
CONF ALL
03
MIN 25 mm
MIN (0.984 in)
MIN 25 mm
MIN (0.984 in)
APPLY MATERIAL No 06ACB101
NOTE:
APPLY MATERIAL No 04QAB202
03 APPLY MATERIAL No 12ABC1
04 APPLY MATERIAL No 12AEB1
02 04
01
FWD
FWD
MIN 25 mm
MIN (0.984 in)
MIN 25 mm
MIN (0.984 in)
STGR1RH
STGR2RH
STGR1LH
STGR2LH
A A
A A
A A
A A
B
B
B
B
B
B
PROTECTION AREA
FR99FR100FR101FR102
SEALANT BEAD
VIEW LOOKING UP
C C
02 01
C
C
STGR2LH
STGR1LH
STGR1RH
STGR2RH
VALID FOR STGR 2RH,
1RH, 1LH AND 2LH
ADD AS MUCH AS POSSIBLE
INSIDE THE STRINGERS
ASSURING A MINIMUM
LENGTH OF 150 mm (5.906 in)
PROTECTION AREA
C
D
D
RESPECT DRYING TIME BETWEEN05
EACH MATERIAL APPLICATION
05
0505
05 0505
04
05
ICN-A350-A-53XXP029-A-FAPE3-03ERA-A-003-01

### Page 48

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ERB-A-002-01 SHEET 4/4
REV 00 Nov 17/17 A350-53-P029Protection of the LH and RH STGR1
and STGR2 between FR98 and FR102 Page 48
CONF ALL
APPLY MATERIAL No 06ACB101
NOTE:
APPLY MATERIAL No 04QAB202
04 APPLY MATERIAL No 12AEB1
MIN 25 mm
MIN (0.984 in)
02
0401 02 01
04
MIN 25 mm
MIN (0.984 in)
MIN 25 mm
MIN (0.984 in)
MIN 25 mm
MIN (0.984 in)B B
MIN 25 mm
MIN (0.984 in)
MIN 25 mm
MIN (0.984 in)
02
04
01
A A
RESPECT DRYING TIME BETWEEN05
EACH MATERIAL APPLICATION
05
05 0505
05
05
05
05
05
ICN-A350-A-53XXP029-A-FAPE3-03ERB-A-002-01

### Page 49

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 49
(6) Task A350-A-53-XX-P029-06001-250A-A - Do the Protection at the Upper Bar
Area at FR100
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
Access Door 314AR311
Work location Frame100
Manpower/Resources/Skills
Man-hours 0.50h
Minimum Number of person 1
Elapsed Time 0.50h
Skills Airframe
Material necessary to do the job
Consumables
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
04QAB2 Coating - - FlexibleStructure
06ACB1 Polysulfide Sealant - LowDensity MultiPurpose Fillet
08BAA9 Non Aqueous Cleaner -General
12AEB1
Corrosion Preventive
Compound - Heavy Duty
Long Durability Hard Film
Referenced Information
Manuals/Drawings References/Sheets
ASR A350-A-51-24-XX-01ZZZ-667Z-A
CML CONSUMABLE MATERIAL LIST (CML)
PMS
01-02-102
01-02-106
01-02-60
Procedure
(a) Do the protection at the upper bar area at Frame 100.
Refer to Ref. Fig. Protection at the Upper Bar Area at FR100
Apply sealant in accordance with Ref. ASR A350-A-51-24-XX-01ZZZ-667Z-A.
Apply sealant in accordance with Ref. ASR A350-A-51-24-XX-01ZZZ-667Z-A.
For the application of corrosion preventive temporary protection compounds,
refer to Ref. PMS 01-02-60.
For the coating with paint, refer to Ref. PMS 01-02-102.
For the sealing of aircraft structure, refer to Ref. PMS 01-02-106.
For the specification of Material application codes given in this Service Bulletin,
refer to Ref. CML.

### Page 50

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 50
1 Clean the work area with:
  Non Aqueous Cleaner -
General
08BAA9  
2 Do the sealant bead with:
NOTE: For the gaps areas where it is complicated to apply a sealant bead
using a conventional procedure the sealant will be applied by
injection using a standard commercial proper bent nozzle. Sealant
will be injected in hole until it emerges from both holes.
  Polysulfide Sealant
- Low Density
MultiPurpose Fillet
06ACB1  
NOTE: Use the adhesion promoter only on unpainted composite areas.
3 Coat the sealant bead with:
  Coating - - Flexible
Structure
04QAB2  
4 Apply corrosion preventive compound:
  Corrosion Preventive
Compound - Heavy
Duty Long Durability
Hard Film
12AEB1

### Page 51

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ERE-A-001-01 SHEET 1/4
REV 00 Nov 17/17 A350-53-P029Protection at the Upper Bar Area at FR100
Page 51
CONF ALL
FR102
 - Z311 Z312
FR93 A
A
FR100
FR98 FR97 FR96 FR95STGR1RH STGR1LH
B C D
ICN-A350-A-53XXP029-A-FAPE3-03ERE-A-001-01

### Page 52

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ERF-A-003-01 SHEET 2/4
REV 00 Nov 17/17 A350-53-P029Protection at the Upper Bar Area at FR100
Page 52
CONF ALL
APPLY MATERIAL No 06ACB101
NOTE:
STGR1LH STGR1RHF
W
D
FR100
B
STARTING INJECTION OF
SEALANT ON THIS SIDE
01
INJECTION IS COMPLETE WHEN SEALANT
EMERGES FROM OPPOSITE SIDE
01
ICN-A350-A-53XXP029-A-FAPE3-03ERF-A-003-01

### Page 53

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ERG-A-003-01 SHEET 3/4
REV 00 Nov 17/17 A350-53-P029Protection at the Upper Bar Area at FR100
Page 53
CONF ALL
SEALANT BEAD
FR100
STGR1RH STGR1LH
SEALANT BEAD
STGR1LH STGR1RHF
W
D
F
W
D
A A
A A
C
D
FR100
ICN-A350-A-53XXP029-A-FAPE3-03ERG-A-003-01

### Page 54

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ERH-A-003-01 SHEET 4/4
REV 00 Nov 17/17 A350-53-P029Protection at the Upper Bar Area at FR100
Page 54
CONF ALL
MIN 25 mm
MIN (0.984 in)
MIN 25 mm
MIN (0.984 in)
03
03
02
01
01
MIN 25 mm
MIN (0.984 in)
FWD
FR100
02
B B
MIN 25 mm
MIN (0.984 in)APPLY MATERIAL No 06ACB101NOTE:
02
APPLY MATERIAL No 12AEB103
FWD
FR100
CLY=0
A A
MIN 25 mm
MIN (0.984 in)
MIN 25 mm
MIN (0.984 in)SEALANT BEAD
APPLY MATERIAL No 04QAB2
B B
B B
PROTECTION AREA
RESPECT DRYING TIME BETWEEN05
EACH MATERIAL APPLICATION
05
05
05
05 0505
ICN-A350-A-53XXP029-A-FAPE3-03ERH-A-003-01

### Page 55

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 55
(7) Task A350-A-53-XX-P029-07001-250A-A - Do the Protection at the Lower Bar
Area at FR100
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
Access Door 314AR311
Work location Frame100
Manpower/Resources/Skills
Man-hours 0.50h
Minimum Number of person 1
Elapsed Time 0.50h
Skills Airframe
Material necessary to do the job
Consumables
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
04QAB2 Coating - - FlexibleStructure
06ACB1 Polysulfide Sealant - LowDensity MultiPurpose Fillet
08BAA9 Non Aqueous Cleaner -General
12AEB1
Corrosion Preventive
Compound - Heavy Duty
Long Durability Hard Film
Referenced Information
Manuals/Drawings References/Sheets
ASR A350-A-51-24-XX-01ZZZ-667Z-A
CML CONSUMABLE MATERIAL LIST (CML)
PMS
01-02-102
01-02-106
01-02-60
Procedure
(a) Do the protection at the lower bar area at Frame 100.
Refer to Ref. Fig. Protection at the Lower Bar Area at FR100
Apply sealant in accordance with Ref. ASR A350-A-51-24-XX-01ZZZ-667Z-A.
Apply sealant in accordance with Ref. ASR A350-A-51-24-XX-01ZZZ-667Z-A.
For the application of corrosion preventive temporary protection compounds,
refer to Ref. PMS 01-02-60.
For the coating with paint, refer to Ref. PMS 01-02-102.
For the sealing of aircraft structure, refer to Ref. PMS 01-02-106.
For the specification of Material application codes given in this Service Bulletin,
refer to Ref. CML.

### Page 56

A350
SERVICE BULLETIN
REV 00 Nov 17/17 A350-53-P029
Page 56
1 Clean the work area with:
  Non Aqueous Cleaner -
General
08BAA9  
2 Do the sealant bead with:
NOTE: For the gaps areas where it is complicated to apply a sealant bead
using a conventional procedure the sealant will be applied by
injection using a standard commercial proper bent nozzle. Sealant
will be injected in hole until it emerges from both holes.
  Polysulfide Sealant
- Low Density
MultiPurpose Fillet
06ACB1  
NOTE: Use the adhesion promoter only on unpainted composite areas.
3 Coat the sealant bead with:
  Coating - - Flexible
Structure
04QAB2  
4 Apply corrosion preventive compound:
  Corrosion Preventive
Compound - Heavy
Duty Long Durability
Hard Film
12AEB1

### Page 57

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ERR-A-002-01 SHEET 1/4
REV 00 Nov 17/17 A350-53-P029Protection at the Lower Bar Area at FR100
Page 57
CONF ALL
A
FR102
 - Z311 Z312
FR93
B
A
FR102
B
FR100
FR94
FR100
F
W
D
C D E
STGR23BRH STGR23BLH
ICN-A350-A-53XXP029-A-FAPE3-03ERR-A-002-01

### Page 58

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ERS-A-004-01 SHEET 2/4
REV 00 Nov 17/17 A350-53-P029Protection at the Lower Bar Area at FR100
Page 58
CONF ALL
APPLY MATERIAL No 06ACB101
NOTE:
FR100
F
W
D
STARTING INJECTION OF
SEALANT ON THIS SIDE
INJECTION IS COMPLETE WHEN SEALANT
EMERGES FROM OPPOSITE SIDE
01 01
C
STGR23BRHSTGR23BLH
ICN-A350-A-53XXP029-A-FAPE3-03ERS-A-004-01

### Page 59

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ERT-A-004-01 SHEET 3/4
REV 00 Nov 17/17 A350-53-P029Protection at the Lower Bar Area at FR100
Page 59
CONF ALL
SEALANT BEAD
SEALANT BEAD
FR100
FR100
F
W
D
A
A
AA
D
E
F
W
D
STGR23BRHSTGR23BLH
STGR23BLHSTGR23BRH
ICN-A350-A-53XXP029-A-FAPE3-03ERT-A-004-01

### Page 60

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP029-A-FAPE3-03ERU-A-003-01 SHEET 4/4
REV 00 Nov 17/17 A350-53-P029Protection at the Lower Bar Area at FR100
Page 60
CONF ALL
FWD B B
FWD
FR100
CLY=0
A A
MIN 25 mm
MIN (0.984 in)
MIN 25 mm
MIN (0.984 in)SEALANT BEAD
B B
BB
PROTECTION AREA
MIN 25 mm
MIN (0.984 in)
MIN 25 mm
MIN (0.984 in)
03
03
02
01
01
MIN 25 mm
MIN (0.984 in)
FR100
02
MIN 25 mm
MIN (0.984 in)APPLY MATERIAL No 06ACB101NOTE:
02
APPLY MATERIAL No 12AEB103
APPLY MATERIAL No 04QAB2
RESPECT DRYING TIME BETWEEN05
EACH MATERIAL APPLICATION
05
05
05
05 0505
ICN-A350-A-53XXP029-A-FAPE3-03ERU-A-003-01

The text continues at https://openairdocs.org/service-documents/airbus/a350-53-p029/file/53938428c374.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
