# Airbus Service Bulletin A350-53-P046

Copy: No revision named ("SB A350-53-P046"), 18 pages: PDF https://openairdocs.org/files/sha256/62/0e/620ece640109e7a0eaa67369f2ecafceeea5a03a2529896ae97a18c90a6d4f73; text https://openairdocs.org/service-documents/airbus/a350-53-p046/file/620ece640109.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2019-0724, the docket of AD 2019-21-07. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A350-53-P046
- Page: https://openairdocs.org/service-documents/airbus/a350-53-p046

## Text (18 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2019-0724, the docket of AD 2019-21-07. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

A350
SERVICE BULLETIN
REV 00 Dec 19/18 A350-53-P046
Page 1
CONF ALL
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
 
The content of this document is the property of Airbus.
It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may information
contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of the
copyright. Requests for reproduction of any data in this document and the media authorized for it must
be addressed to Airbus.
MANDATORY MANDATORY MANDATORY
ATA SYSTEM: 53
TITLE: FUSELAGE - FUSELAGE - FORWARD FUGELAGE - INSPECT EXTERNAL
LUGS OF THE CARGO DOOR SURROUND ALU LATCH FITTINGS IN
SECTION 13/14
MODIFICATION No.:
None

### Page 2

A350
SERVICE BULLETIN
SUMMARY
REV 00 Dec 19/18 A350-53-P046
Page 2
ATA SYSTEM: 53
TITLE: FUSELAGE - FUSELAGE - FORWARD FUGELAGE - INSPECT EXTERNAL
LUGS OF THE CARGO DOOR SURROUND ALU LATCH FITTINGS IN
SECTION 13/14
SUMMARY
This summary is for information only and is not approved for modification of the aircraft.
A. MODIFICATIONS
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
B. REASON
(1) History
During inspection on a test aircraft, cracks have been detected on parts made of
forging aluminum 7037 due to an unexpected behavior of this material.
(2) Objective/Action
This Service Bulletin describes the detailed inspection of the external lugs of the
Forward (FWD) cargo-door aluminum latch fittings at Frame 24, Frame 24A, Frame 25
and Frame 25A in the lower part of the cargo door surround.
NOTE: The accomplishment of Service Bulletin No. A350–53–P011 (Fuselage —
Forward Fuselage — Introduce Improved Cargo Door Surround ALU Latch
Fittings in Section 13/14 — SB only), cancels the requirement of this Service
Bulletin.
(3) Advantages
The accomplishment of this Service Bulletin will ensure the early detection of cracks
on the lugs of the FWD cargo-door aluminum latch fittings at Frame 24, Frame 24A,
Frame 25 and Frame 25A thus preventing unscheduled and large repairs.
(4) Operational/Maintenance Consequences
The Operational/Maintenance Consequences of this Service Bulletin are covered by
the update of the affected publications detailed in ‘PLANNING INFORMATION’.
C. GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE MANDATORY COST SAVING NO
A/C OPERATION
AFFECTED
NO VENDOR SB NO
CANCELS INSPECTION SB NO ETOPS AFFECTED NO
PAX COMFORT AFFECTED NO POTENTIAL AD YES
RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO

### Page 3

A350
SERVICE BULLETIN
SUMMARY
REV 00 Dec 19/18 A350-53-P046
Page 3
EVALUATION TABLE
LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO
NOTE: Service Bulletin must be accomplished.
D. MAINTENANCE CONFIGURATION
No specific aircraft maintenance configuration required.
E. MATERIAL PRICE INFORMATION
(1) Detailed Inspection of the External Lugs of the FWD Cargo Door Aluminum
Latch Fittings
(a) T ask set A350-A-53-XX-P046-01000-93BA-A Detailed Inspection of the External
Lugs of the FWD Cargo Door Aluminum Latch Fittings
No material
F. APPLICABILITY
This Service Bulletin is applicable to this (these) operator(s):
CPA FIN HVN QTR SIA TAM
G. CONCURRENT REQUIREMENTS
None
H. NATURE OF THE WORK
(1) Detailed Inspection of the External Lugs of the FWD Cargo Door Aluminum
Latch Fittings
(a) T ask set A350-A-53-XX-P046-01000-93BA-A Detailed Inspection of the External
Lugs of the FWD Cargo Door Aluminum Latch Fittings
AIRCRAFT YES
EQUIPMENT NO
I. MANPOWER
(1) Detailed Inspection of the External Lugs of the FWD Cargo Door Aluminum
Latch Fittings
(a) T ask set A350-A-53-XX-P046-01000-93BA-A Detailed Inspection of the External
Lugs of the FWD Cargo Door Aluminum Latch Fittings
MANPOWER
TOTAL MAN-HOURS 5.50 h
ELAPSED TIME (HOURS) 5.50 h

### Page 4

A350
SERVICE BULLETIN
SUMMARY
Figure ICN-A350-A-53XXP046-A-FAPE3-047AH-A-001-01 SHEET 1/1
REV 00 Dec 19/18 A350-53-P046General Overview
Page 4
J. GENERAL OVERVIEW
CONF ALL
A
Z821
A
AREAS TO BE INSPECTED
ICN-A350-A-53XXP046-A-FAPE3-047AH-A-001-01

### Page 5

A350
SERVICE BULLETIN
REV 00 Dec 19/18 A350-53-P046
Page 5
ATA SYSTEM: 53
TITLE: FUSELAGE - FUSELAGE - FORWARD FUGELAGE - INSPECT EXTERNAL
LUGS OF THE CARGO DOOR SURROUND ALU LATCH FITTINGS IN
SECTION 13/14
1. PLANNING INFORMATION
A. APPLICABILITY
NOTE: This Service Bulletin is only applicable to aircraft on which MOD No. 107049L31401
(Change Material AL 7037 to AL 7010 in Section 13/14) is not embodied.
(1) Models
ON A/C 0006-0039
350-941
CONF ALL
(2) Applicability by MSN
0006-0039
(3) MSN by configuration
MSN CONFIGURATION
0006 0007 0008 0009 0010 0011 0012 0013 0014 0015 0016
0017 0018 0019 0020 0021 0022 0023 0024 0025 0026 0027
0028 0029 0030 0031 0032 0033 0034 0035 0036 0037 0038
0039
001
(4) Configuration definition
Configuration 001
CONF 001 is applicable for all the aircraft affected by this Service Bulletin as a
standard configuration.
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
During inspection on a test aircraft, cracks have been detected on parts made of
forging aluminum 7037 due to an unexpected behavior of this material.
(2) Objective/Action
This Service Bulletin describes the detailed inspection of the external lugs of the
Forward (FWD) cargo-door aluminum latch fittings at Frame 24, Frame 24A, Frame 25
and Frame 25A in the lower part of the cargo door surround.
NOTE: The accomplishment of Service Bulletin No. A350–53–P011 (Fuselage —
Forward Fuselage — Introduce Improved Cargo Door Surround ALU Latch
Fittings in Section 13/14 — SB only), cancels the requirement of this Service
Bulletin.

### Page 6

A350
SERVICE BULLETIN
REV 00 Dec 19/18 A350-53-P046
Page 6
(3) Advantages
The accomplishment of this Service Bulletin will ensure the early detection of cracks
on the lugs of the FWD cargo-door aluminum latch fittings at Frame 24, Frame 24A,
Frame 25 and Frame 25A thus preventing unscheduled and large repairs.
(4) Operational/Maintenance Consequences
The Operational/Maintenance Consequences of this Service Bulletin are covered by
the update of the affected publications detailed in ‘PLANNING INFORMATION’.
D. DESCRIPTION
T o accomplish this Service Bulletin it is necessary to:
(1) Detailed Inspection of the External Lugs of the FWD Cargo Door Aluminum
Latch Fittings
(a) T ask set A350-A-53-XX-P046-01000-93BA-A Detailed Inspection of the External
Lugs of the FWD Cargo Door Aluminum Latch Fittings
1 Do a Detailed Inspection of the External Lugs of the Aluminum Latch
Fittings
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
Accomplishment of this Service Bulletin must be done.
This Service Bulletin has been classified Mandatory. It is expected that an
Airworthiness Directive (AD) published by the European Aviation Safety Agency
(EASA) will be issued to confirm this classification. It is anticipated that the AD will
confirm the thresholds and intervals given but reference should be made to the AD for
confirmation of the mandated accomplishment timescale.
T able 1, CONF 001 — Detailed Inspection of the External Lugs of the FWD Cargo Door
Aluminum Latch Fittings for cracks
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL
All aircraft Do a detailed
inspection of the
external lugs of
the FWD cargo
door aluminum
latch fittings in
accordance with
Ref. T ask set A3
50-A-53-XX-P04
6-01ZZZ-93BZ-A
Within 3600
Flight Cycle(s) or
within 3 year(s)
from entry
into service,
whichever
occurs latest
Before 690
Flight Cycle(s)
See NOTE*
None
If crack(s) found Apply Service
Bulletin No
A350–53–
P011 for the
replacement
of the cracked
parts And
Before next flight None None

### Page 7

A350
SERVICE BULLETIN
REV 00 Dec 19/18 A350-53-P046
Page 7
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL
  No further action None None None
If no crack found Apply Service
Bulletin No
A350–53–
P011 And
Before 690
Flight Cycle(s)
None None
  No further action None None None
  OR      
  Repeat the
detailed
inspection of the
external lugs of
the FWD cargo
door aluminum
latch fittings in
accordance with
Ref. T ask set A3
50-A-53-XX-P04
6-01ZZZ-93BZ-A
None None Before 690
Flight Cycle(s)
NOTE*: Grace Period is applicable to those aircraft which have overshoot 3600 Flight
Cycle(s) at the time of the AD effective date.
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organization Approval No. EASA.21J.031.
If an aircraft listed in the applicability has a modification or repair embodied that is not
of AIRBUS origin, and which affects the content of this Service Bulletin, the operator
is responsible for obtaining approval by its airworthiness authority for any adaptation
necessary before incorporation of the Service Bulletin.
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Detailed Inspection of the External Lugs of the FWD Cargo Door Aluminum
Latch Fittings
(a) T ask set A350-A-53-XX-P046-01000-93BA-A Detailed Inspection of the External
Lugs of the FWD Cargo Door Aluminum Latch Fittings
PREPARATION
Job Set-up 2.00 h
PROCEDURE
Do a Detailed Inspection of the External Lugs of the
Aluminum Latch Fittings
1.50 h
PREPARATION FOR TEST
None

### Page 8

A350
SERVICE BULLETIN
REV 00 Dec 19/18 A350-53-P046
Page 8
TEST
None
CLOSE-UP
Close-up 2.00 h
TOTAL MAN-HOURS 5.50 h
ELAPSED TIME (HOURS) 5.50 h
H. WEIGHT AND BALANCE
Not changed
I. ELECTRICAL LOAD DATA
Not changed
J. REFERENCES
(1) Detailed Inspection of the External Lugs of the FWD Cargo Door Aluminum
Latch Fittings
(a) T ask set A350-A-53-XX-P046-01000-93BA-A Detailed Inspection of the External
Lugs of the FWD Cargo Door Aluminum Latch Fittings
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-5X-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-6X-XX-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP)
A350-A-24-41-XX-00ZZZ-170Z-A A350-A-50-1X-XX-00ZZZ-170Z-A
A350-A-50-1X-XX-01ZZZ-170Z-A
A350-A-50-23-XX-00ZZZ-561Z-A A350-A-52-33-71-01ZZZ-270Z-A
A350-A-52-33-71-A4ZZZ-520Z-A
A350-A-52-33-71-A4ZZZ-720Z-A
SERVICE BULLETIN (SB)
A350-53-P011
TECHNICAL FOLLOW UP (TFU)
53.40.00.008
CONSUMABLE MATERIAL LIST (CML)
K. PUBLICATION AFFECTED
None
L. INDUSTRY SUPPORT INFORMATION
AIRBUS will credit the man hours indicated in this Service Bulletin at the agreed in-house
warranty labor rate for claims received no later than 90 days after completion of the last
affected aircraft of your fleet, for the accomplishment of this Service Bulletin before Dec
31/21.
This Service Bulletin is the subject of an AIRBUS monitored retrofit campaign.

### Page 9

A350
SERVICE BULLETIN
REV 00 Dec 19/18 A350-53-P046
Page 9
For the organization of this retrofit, you are kindly requested to contact AIRBUS retrofit
management department: monitored.retrofit@airbus.com.

### Page 10

A350
SERVICE BULLETIN
REV 00 Dec 19/18 A350-53-P046
Page 10
2. MATERIAL INFORMATION
A. MATERIAL APPLICABILITY
Material for task set A350-A-53-XX-P046-01000-93BA-A Detailed Inspection of the
External Lugs of the FWD Cargo Door Aluminum Latch Fittings
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
Referenced parts See SB
B. TOOLING
Referenced tools for task set A350-A-53-XX-P046-01000-93BA-A Detailed
Inspection of the External Lugs of the FWD Cargo Door Aluminum Latch Fittings
NOTE: T o accomplish this Service Bulletin it is necessary to use the tools listed in the
subsequent referenced tasks:
Ref. MP A350-A-50-1X-XX-00ZZZ-170Z-A
Ref. MP A350-A-52-33-71-01ZZZ-270Z-A
Ref. MP A350-A-52-33-71-A4ZZZ-520Z-A
Ref. MP A350-A-52-33-71-A4ZZZ-720Z-A
C. CONSUMABLES
Consumables for task set A350-A-53-XX-P046-01000-93BA-A Detailed Inspection
of the External Lugs of the FWD Cargo Door Aluminum Latch Fittings
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
08BDA1 Non Aqueous Cleaner - Waxand grease remover
14SBA1 T extile - Lint free Cotton
D. LIST OF NEW PARTS
Referenced parts for task set A350-A-53-XX-P046-01000-93BA-A Detailed
Inspection of the External Lugs of the FWD Cargo Door Aluminum Latch Fittings
NOTE: T o accomplish this Service Bulletin it is necessary to use the expendable parts listed
in the subsequent referenced task:
Ref. MP A350-A-52-33-71-01ZZZ-270Z-A
E. LIST OF EXISTING PARTS
No parts

### Page 11

A350
SERVICE BULLETIN
REV 00 Dec 19/18 A350-53-P046
Page 11
3. ACCOMPLISHMENT INSTRUCTIONS
Task set A350-A-53-XX-P046-01000-93BA-A
Detailed Inspection of the External Lugs of the FWD Cargo Door Aluminum Latch Fittings
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL
WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND MECHANICALLY
SERVICEABLE). WHEN YOU DO MAINTENANCE WORK, REPAIRS OR
MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND
THE WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND
DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO Ref. ESP A350-A-20-5X-
XX-01ZZZ-042Z-A.
NOTE: The accomplishment instructions of this Service Bulletin include procedures given in
other documents or in other sections of the Service Bulletin. When the words “refer to”
are used and the operator has a procedure accepted by the local authority he belongs to,
the accepted alternative procedure can be used. When the words “in accordance with”
are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service Bulletin.
Operators can therefore, as deemed necessary, omit or add access and/or close-up steps
to add flexibility to their maintenance operations as long as the technical intent of the
Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms. Refer
to paragraph 1.J., References, for the definition of acronyms.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance necessary
to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, including RC paragraph contained herein, contact
AIRBUS for further instructions and approval.
NOTE: The purpose of flowcharts is to supplement the information given in the Procedure and
Compliance paragraphs and not to serve as the primary source for tasks or compliance
times given in this Service Bulletin.
NOTE: This Service Bulletin is classified mandatory or expected to be classified mandatory by
an Airworthiness Directive (AD). The paragraphs 3.C. and 3.E. in these accomplishment
instructions are Required for Compliance (RC) and must be done to comply with the AD.
T o allow more flexibility, the rule "refer to" and "in accordance with" will apply to these
paragraphs 3.C. and 3.E. Other paragraphs are recommended and may be deviated from,
done as part of other actions or done with accepted methods different from those given
in the Service Bulletin, as long as the RC paragraphs can be done and the aircraft can be
put back into a serviceable condition.
A. TASK SET ASSOCIATED INFORMATION
Task Manpower
TOTAL MAN-HOURS 5.50 h

### Page 12

A350
SERVICE BULLETIN
REV 00 Dec 19/18 A350-53-P046
Page 12
ELAPSED TIME (HOURS) 5.50 h
B. PREPARATION
(1) Task A350-A-53-XX-P046-02001-540A-A - Job Set-up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 2.00 h
Minimum Number of person 1
Elapsed Time 2.00 h
Referenced Information
Manuals/Drawings References/Sheets
INTRO A350-A-00-6X-XX-11ZZZ-018Z-D
MP
A350-A-24-41-XX-00ZZZ-170Z-A
A350-A-50-1X-XX-00ZZZ-170Z-A
A350-A-50-23-XX-00ZZZ-561Z-A
A350-A-52-33-71-A4ZZZ-520Z-A
Procedure
NOTE: For the basic Aircraft configuration, refer to Ref. INTRO A350-A-00-6X-
XX-11ZZZ-018Z-D “Introductions” in Manual Front Matter section.
(a) Make sure that the aircraft is electrically grounded, refer to Ref. MP A350-
A-24-41-XX-00ZZZ-170Z-A.
(b) Make sure that the cargo loading system is de-energized, refer to Ref. MP A350-
A-50-23-XX-00ZZZ-561Z-A.
(c) Put an access platform in position below the FWD cargo-compartment door.
(d) Get access to the FWD cargo compartment, refer to Ref. MP A350-A-50-1X-
XX-00ZZZ-170Z-A.
(e) Remove the spools of the FWD cargo-compartment door at Frame 24, Frame
24A, Frame 25 and Frame 25A, refer to Ref. MP A350-A-52-33-71-A4ZZZ-520Z-A.
C. PROCEDURE
(1) Task A350-A-53-XX-P046-01001-311A-A - Do a Detailed Inspection of the
External Lugs of the Aluminum Latch Fittings
Job Set-Up Information
Working Area
Impacted Zone Access / Work Location
821 Work location From Frame 24 to Frame 25A
Manpower/Resources/Skills
Man-hours 1.50 h
Minimum Number of person 1
Elapsed Time 1.50 h
Skills Airframe

### Page 13

A350
SERVICE BULLETIN
REV 00 Dec 19/18 A350-53-P046
Page 13
Material necessary to do the job
Consumables
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
08BDA1 Non Aqueous Cleaner - Waxand grease remover
14SBA1 T extile - Lint free Cotton
Referenced Information
Manuals/Drawings References/Sheets
SB A350-53-P011
CML CONSUMABLE MATERIAL LIST (CML)
Procedure
(a) Standard practice:
1 For the specification of Material application codes given in this Service
Bulletin, refer to Ref. CML.
(b) Clean the inspection area with:
  T extile - Lint free Cotton14SBA1  
and
  Non Aqueous Cleaner
- Wax and grease
remover
08BDA1  
(c) At the threshold given in the PLANNING INFORMATION paragraph E.(2):
Do a detailed inspection of the external lugs of the FWD cargo door aluminum
latch fittings for cracks.
Refer to Ref. Fig. Flowchart
Refer to Ref. Fig. Inspection of the External Lugs of the FWD Cargo Door
Aluminum Latch Fittings
1 If crack(s) found:
a Apply Service Bulletin No. Ref. SB A350-53-P011
And
b No further action.
2 If no crack found:
a Apply Service Bulletin No. Ref. SB A350-53-P011
And
b No further action.
OR
c Repeat the detailed inspection of the external lugs of the FWD cargo
door aluminum latch fittings in accordance with Ref. T ask set A350-
A-53-XX-P046-01ZZZ-93BZ-A.

### Page 14

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP046-A-FAPE3-047AG-A-001-01 SHEET 1/1
REV 00 Dec 19/18 A350-53-P046Flowchart
Page 14
CONF ALL
YESIS CRACKFOUND?NO
NO FURTHER ACTION
REPEAT THE DETAILED INSPECTION AT
THE THRESHOLD GIVEN IN THE PLANNING
INFORMATION PARAGRAPH E.(2), IN
ACCORDANCE WITH TASK SET
A350-A-53-XX-P046-01000-93BA-A
APPLY SERVICE BULLETIN
No A350-53-P011
OR
DO A DETAILED INSPECTION OF THE EXTERNAL LUGS OF
THE FWD CARGO DOOR ALUMINIUM LATCH FITTINGS AT
THE THRESHOLD GIVEN IN THE PLANNING INFORMATION
PARAGRAPH E.(2), IN ACCORDANCE WITH
TASK SET A350 A-53-XX-P046-01000-93BA-A
APPLY SERVICE BULLETIN
No A350-53-P011
NOTE:
THE PURPOSE OF FLOWCHARTS IS TO SUPPLEMENT THE INFORMATION GIVEN IN THE PROCEDURE AND
COMPLIANCE PARAGRAPHS AND NOT TO SERVE AS THE PRIMARY SOURCE FOR TASKS OR COMPLIANCE
TIMES GIVEN IN THIS SERVICE BULLETIN. ICN-A350-A-53XXP046-A-FAPE3-047AG-A-001-01

### Page 15

A350
SERVICE BULLETIN
Figure ICN-A350-A-53XXP046-A-FAPE3-047AI-A-001-01 SHEET 1/1
REV 00 Dec 19/18 A350-53-P046Inspection of the External Lugs of the
FWD Cargo Door Aluminum Latch Fittings Page 15
CONF ALL
A B
TYPICAL VIEW
Z821
A
B
NOTE:
EXTERNAL LUGS TO BE INSPECTED.
ICN-A350-A-53XXP046-A-FAPE3-047AI-A-001-01

### Page 16

A350
SERVICE BULLETIN
REV 00 Dec 19/18 A350-53-P046
Page 16
D. PREPARATION FOR TEST
None
E. TEST
None
F. CLOSE-UP
(1) Task A350-A-53-XX-P046-02001-740A-A - Close-up
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 2.00 h
Minimum Number of person 1
Elapsed Time 2.00 h
Referenced Information
Manuals/Drawings References/Sheets
MP
A350-A-50-1X-XX-01ZZZ-170Z-A
A350-A-52-33-71-01ZZZ-270Z-A
A350-A-52-33-71-A4ZZZ-720Z-A
Procedure
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Install the spools of the FWD cargo-compartment door at Frame 24, Frame 24A,
Frame 25 and Frame 25A, refer to Ref. MP A350-A-52-33-71-A4ZZZ-720Z-A.
NOTE: After the installation of the spools of the FWD cargo-compartment door,
the adjustment of the spools of the FWD cargo-compartment door must
be done, refer to Ref. MP A350-A-52-33-71-01ZZZ-270Z-A.
(c) Close the access to the FWD cargo compartment, refer to Ref. MP A350-A-50-1X-
XX-01ZZZ-170Z-A.
(d) Remove the access platform(s)
(e) Put the aircraft back to its initial configuration.
G. ADMINISTRATIVE
(1) Task A350-A-53-XX-P046-01001-90AA-A - Administrative
Procedure
Confirm in the applicable aircraft records that you have completed all the work defined
in this Service Bulletin task set as required.

### Page 17

A350
SERVICE BULLETIN
APPENDIX
REV 00 Dec 19/18 A350-53-P046
Page 17
APPENDIX
A. REPORTING SHEET
TITLE: FUSELAGE - FUSELAGE - FORWARD FUGELAGE - INSPECT EXTERNAL
LUGS OF THE CARGO DOOR SURROUND ALU LATCH FITTINGS IN
SECTION 13/14
MODIFICATION No.:  
(1) SB Reporting status
This Service Bulletin will only be incorporated into affected customized Maintenance
and Flight Operations Products if it is duly reported to Airbus.
(2) GENERAL information
The SB Reporting policy is published in ISI 00.00.00135. This document provides
information regarding: the SB Reporting means and benefits, the update of
customized Maintenance Products and customized Flight Operations Products.
If this Service Bulletin has an operational impact, refer to paragraph "Flight Operations
Products" for further information on the update of affected Flight Operations Products.
(3) SB Reporting procedure
Standard practice to report SB is to use the online reporting application on
AirbusWorld.
Refer to ISI 00.00.00179:
- For complete information on reporting means to Airbus, Question 2 "What are
the standard practices for SB Reporting?"
- If this SB requires previous or simultaneous accomplishment of other SBs,
Question 3 "What about the reporting of prerequisite Service Bulletins?"
NOTE: ISI 00.00.00179 covers all the frequently asked questions about SB Reporting.
It is revised on a regular basis.

### Page 18

A350
SERVICE BULLETIN
APPENDIX
REV 00 Dec 19/18 A350-53-P046
Page 18
B. QUALITY PERCEPTION FORM
Use this form to tell us what is your perception of the quality of this Service Bulletin.
The reported data that you provide us will be used to analyse areas of difficulties and to
take corrective action to further improve the quality of our Service Bulletin.
We thank you for the time you have taken in completing this form.
Quality rating of this SB 4 3 2 1
Quality rating of the Accomplishment Instructions 4 3 2 1
Quality rating of the Illustrations 4 3 2 1
Is this SB easy to understand ? Y / N
NOTE: Please rate on a scale of 1 to 4, with 4 being the highest score
If you have difficulties in the accomplishment of this SB please quote below the area(s) and
give a short description of the issue.
Planning Material Instructions
X Applicability X T ooling X Preparation
X Reason X List of Materials
Operator Supplied
X Mod/Inspection
X Manpower X Kit content X T est
X References X Re-identification X Close-up
X Publication X Illustrations
X Industry Support
Comments :
Operator : Date :
Name/Title
Please return this form to :
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
Or via your Resident Customer Support Office.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
