# Airbus Service Bulletin A350-55-P003

Copy: No revision named ("SB A350-55-P003"), 99 pages: PDF https://openairdocs.org/files/sha256/2d/ec/2dec586f9c86bcf6157adadba6b91da467d33e2506f9ac24b15f406f4aacb804; text https://openairdocs.org/service-documents/airbus/a350-55-p003/file/2dec586f9c86.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2018-0506; AD 2018-17-24 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A350-55-P003
- Page: https://openairdocs.org/service-documents/airbus/a350-55-p003

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2018-17-24](https://openairdocs.org/ad/2018-17-24.md), effective Oct 18, 2018: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/a350-55-p003/proposed.md).

## Text (99 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2018-0506; AD 2018-17-24 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

@A350
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
This summary is for information only and is not approved for modification of the aircraft.
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 55
TITLE: STABILIZERS - HORIZON TAL STABILIZER - CORROSION
PREVENTION IN HTP HYBRID JOINTS
**CONF ALL
MODIFICATIONS
MODIFICATION CLASSIFICATION
MAJOR
 None
MINOR
 107877L80463
 108494L80493
NOTE
: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting the
airworthiness of the product. All other changes are major changes.
NOTE
: This modification is related to an airworthiness issue which has been re-classified and
confirmed by EASA as minor in accordance with EU Part 21.A.91.
As such, this is handled by AIRBUS under its Design Organisation Approval No.
EASA.21J.031.
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
The Trimmable Horizontal Stabilizer (THS) and Elevator Structure has several multi material joints
between different parts (Aluminium/Carbon Fibre Reinforced Plastic (CFRP)/CFRP) fitted with wet
installed fasteners and fillet sealing. Both corrosion protection types are not enough to avoid the risk of
corrosion issues in described areas. The affected areas are:
- THS Rear support upper and lower fitting
- THS support fitting back-up
- THS Rear outer fitting to rear spar
- Upper Rear Shell System support installation
- THS Lateral Load Fitting to Rear Spar
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 1
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 2

@A350
SERVICE BULLETIN
SUMMARY
- Upper and Lower Skins/BR plates
- Rib 17 to Rear
- Elevator BR4 to Shell
- TER2 to Upper and Lower Skin
- Elevator tip Bonding Strap at TE
- Elevator TE Wedge
- Pivot fitting
Additionally, a risk of fluid accumulation has been detected in THS Spar Box, in the space between
Stringer 1, Rear Spar Cap and Rib 3, that increase the risk of corrosion in the area.
This Service Bulletin improves the corrosion protection applying new sealant fillets and Corrosion
Prevention Compound (CPC) in affected areas. Fastener nuts have been protected.
A new drain hole is added in Lower Skin to reduce the risk of fluid accumulation.
The accomplishment of this Service Bulletin will contribute to prevent corrosion issues in the protected
areas.
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE
 MANDATORY (1)
 CANCELS INSPECTION SB
 NO
POTENTIAL AD
 YES
 A/C OPERATION AFFECTED
 NO
RELIABILITY AFFECTED
 NO
 PAX COMFORT AFFECTED
 NO
COST SAVING
 NO
 ETOPS AFFECTED
 NO
STRUCTURAL LIFE EXTN
 NO
 VENDOR SB INVOLVED
 NO
NOTE
 (1)
: Service Bulletin must be accomplished.
MATERIAL PRICE INFORMATION
**CONF 001
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Component COMPC01
 1
 See SB
 Placard
**CONF 002
No Material
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 2
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 3

@A350
SERVICE BULLETIN
SUMMARY
**CONF 003
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Component COMPC01
 1
 See SB
 Placard
EFFECTIVITY
**CONF ALL
This Service Bulletin is applicable to this (these) operator(s) :
CPA FIN HVN QTR SIA TAM
CONCURRENT REQUIREMENTS
None
REFERENCES / REPERCUSSIONS
TFU
 None
OEB
 None
AOT
 None
SIL
 None
ISI
 None
LINE MAINTENANCE AFFECTED
 No
LIFE LIMIT
 None
OTHER
 None
NATURE OF THE WORK
AIRCRAFT
 YES
EQUIPMENT
 NO
HARD
 NO
SOFT
 NO
OBRM
 NO
MANPOWER
**CONF 001
Task 55P003-831-942-001: Modification
TOTAL MANHOURS
 57.00
ELAPSED TIME (HOURS)
 21.00
**CONF 002
Task 55P003-831-942-001: Modification
TOTAL MANHOURS
 10.00
ELAPSED TIME (HOURS)
 5.00
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 3
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 4

@A350
SERVICE BULLETIN
SUMMARY
**CONF 003
Task 55P003-831-942-001: Modification
TOTAL MANHOURS
 57.00
ELAPSED TIME (HOURS)
 21.00
APPENDICES
**CONF ALL
Appendix 01
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 4
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 5

@A350
SERVICE BULLETIN
SUMMARY
**CONF 001, 003
Z310
Z340
A
Z330
A
LH SHOWN
RH SYMMETRICAL
RIB1 RIB4
RIB12 RIB15
ER6
TER2
A
AREA
TO BE SEALED
P_SB_55P003_0_SAAA_01_01
Figure A-SSAAA - Sheet 01
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 5
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 6

@A350
SERVICE BULLETIN
SUMMARY
**CONF 002
Z310
Z340
A
Z330
A
LH SHOWN
RH SYMMETRICAL
FR103
A
AREA TO BE 
MODIFIED
P_SB_55P003_0_SAAB_01_00
Figure A-SSAAB - Sheet 01
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 6
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 7

@A350
SERVICE BULLETIN
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 55
TITLE: STABILIZERS - HORIZON TAL STABILIZER - CORROSION
PREVENTION IN HTP HYBRID JOINTS
MODIFICATION No.: 107877L80463 108494L80493
NOTE
: This modification is related to an airworthiness issue which has been re-classified
and confirmed by EASA as minor in accordance with EU Part 21.A.91.
As such, this is handled by AIRBUS under its Design Organisation Approval No.
EASA.21J.031.
This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the
property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with
any information contained in it. It is delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall not be used for any purpose other than
that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall
not be duplicated in any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the conditions herein), without
AIRBUS prior written consent.
1. PLANNING INFORMATION
**CONF ALL
A. EFFECTIVITY
(1) Models
350-941
(2) Effectivity by MSN
0006-0033
(3) Effectivity by Operator
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting from transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 1
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 8

@A350
SERVICE BULLETIN
OPERATOR
 MSN
CPA
 0029 0032
FIN
 0018 0019 0020 0022 0023 0028
HVN
 0014 0015 0016 0017
QTR
 0006 0007 0008 0009 0010 0011 0012 0013 0021 0025 0033
SIA
 0026 0030 0031
TAM
 0024 0027
(4) Configuration by MSN
MSN
 CONFIGURATION
0006 0007 0008 0009 0010 0011 0012 0013 0014 0015 0016
0017 0018 0019 0020
001
0021 0022 0023 0024 0025 0026 0027 0028
 003
0029 0030 0031 0032 0033
 002
(5) Configuration definition
**CONF 001
Config. 001 is valid for aircraft on which MOD No.107877L80463 is not embodied.
**CONF 002
Config. 002 is valid for aircraft on which MOD No. 107877L80463 is embodied.
**CONF 003
Config. 003 is valid for aircraft on which MOD No.107877L80463 is not embodied.
(6) Material Effectivity
**CONF 001
MATERIAL
 QTY PER A/C
 SEE NOTES
Consumable CMLC01
 1
Component COMPC01
 1
Reidentified part set REIDC01
 1
**CONF 002
MATERIAL
 QTY PER A/C
 SEE NOTES
Consumable CMLC02
 1
**CONF 003
MATERIAL
 QTY PER A/C
 SEE NOTES
Consumable CMLC01
 1
Component COMPC01
 1
Reidentified part set REIDC02
 1
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 2
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 9

@A350
SERVICE BULLETIN
**CONF ALL
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
The Trimmable Horizontal Stabilizer (THS) and Elevator Structure has several multi
material joints between different parts (Aluminium/Carbon Fibre Reinforced Plastic
(CFRP)/CFRP) fitted with wet installed fasteners and fillet sealing. Both corrosion
protection types are not enough to avoid the risk of corrosion issues in described areas.
The affected areas are:
- THS Rear support upper and lower fitting
- THS support fitting back-up
- THS Rear outer fitting to rear spar
- Upper Rear Shell System support installation
- THS Lateral Load Fitting to Rear Spar
- Upper and Lower Skins/BR plates
- Rib 17 to Rear
- Elevator BR4 to Shell
- TER2 to Upper and Lower Skin
- Elevator tip Bonding Strap at TE
- Elevator TE Wedge
- Pivot fitting
Additionally, a risk of fluid accumulation has been detected in THS Spar Box, in the
space between Stringer 1, Rear Spar Cap and Rib 3, that increase the risk of corrosion
in the area.
(2) Objective/Action
This Service Bulletin improves the corrosion protection applying new sealant fillets and
Corrosion Prevention Compound (CPC) in affected areas. Fastener nuts have been
protected.
A new drain hole is added in Lower Skin to reduce the risk of fluid accumulation.
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 3
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 10

@A350
SERVICE BULLETIN
(3) Advantages
The accomplishment of this Service Bulletin will contribute to prevent corrosion issues in
the protected areas.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to :
**CONF 001
Task 55P003-831-942-001: Modification
(1) Apply the Corrosion Prevention at the Rear Spar in Zone 330
(2) Apply the Corrosion Prevention in Zone 330
(3) Apply the Corrosion Prevention to the Rear Spar in Zone 340
(4) Apply the Corrosion Prevention in Zone 340
(5) Modify THS Torsion Box and apply the Corrosion Prevention in Zone 330
(6) Modify THS Torsion Box and apply the Corrosion Prevention in Zone 340
(7) Apply the Corrosion Prevention to the Front Spar in Zone 335
(8) Apply the Corrosion Prevention at the Elevator in Zone 335
(9) Apply the Corrosion Prevention to the Front Spar in Zone 345
(10) Apply the Corrosion Prevention at the Elevator in Zone 345
(11) Reidentify the Elevator in Zone 335
(12) Reidentify the Elevator in Zone 345
**CONF 002
Task 55P003-831-942-001: Modification
(1) Modify THS Torsion Box and apply the Corrosion Prevention in Zone 330
(2) Modify THS Torsion Box and apply the Corrosion Prevention in Zone 340
**CONF 003
Task 55P003-831-942-001: Modification
(1) Apply the Corrosion Prevention at the Rear Spar in Zone 330
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 4
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 11

@A350
SERVICE BULLETIN
(2) Apply the Corrosion Prevention in Zone 330
(3) Apply the Corrosion Prevention to the Rear Spar in Zone 340
(4) Apply the Corrosion Prevention in Zone 340
(5) Modify THS Torsion Box and apply the Corrosion Prevention in Zone 330
(6) Modify THS Torsion Box and apply the Corrosion Prevention in Zone 340
(7) Apply the Corrosion Prevention to the Front Spar in Zone 335
(8) Apply the Corrosion Prevention at the Elevator in Zone 335
(9) Apply the Corrosion Prevention to the Front Spar in Zone 345
(10) Apply the Corrosion Prevention at the Elevator in Zone 345
(11) Reidentify the Elevator in Zone 335
(12) Reidentify the Elevator in Zone 345
**CONF ALL
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
Accomplishment of this Service Bulletin must be done within 3 years from entry into
service (EIS).
This Service Bulletin has been classified Mandatory. It is expected that an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA) will be issued
to confirm this classification. It is anticipated that the AD will confirm the (thresholds
and/or intervals and/or date) given but reference should be made to the AD for
confirmation of the mandated accomplishment timescale.
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organisation Approval No. EASA.21J.031.
If an aircraft listed in the effectivity has a modification or repair embodied that is not of
AIRBUS origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 5
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 12

@A350
SERVICE BULLETIN
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also not
included.
**CONF 001
Task 55P003-831-942-001: Modification
Get Access
 11.00
On Aircraft
Apply the Corrosion Prevention at the Rear Spar in
Zone 330
2.00
Apply the Corrosion Prevention in Zone 330
 7.00
Apply the Corrosion Prevention to the Rear Spar in
Zone 340
2.00
Apply the Corrosion Prevention in Zone 340
 7.00
Modify THS Torsion Box and apply the Corrosion
Prevention in Zone 330
3.00
Modify THS Torsion Box and apply the Corrosion
Prevention in Zone 340
3.00
Apply the Corrosion Prevention to the Front Spar in
Zone 335
2.00
Apply the Corrosion Prevention at the Elevator in Zone
335
3.00
Apply the Corrosion Prevention to the Front Spar in
Zone 345
2.00
Apply the Corrosion Prevention at the Elevator in Zone
345
3.00
Reidentify the Elevator in Zone 335
 0.50
Reidentify the Elevator in Zone 345
 0.50
Close-Up
 11.00
TOTAL MANHOURS
 57.00
ELAPSED TIME (HOURS)
 21.00
NOTE
: For an explanation of the man-hours and elapsed time, refer to the Gantt
Chart, Fig. A-SAAAA
 given in Appendix 01 .
**CONF 002
Task 55P003-831-942-001: Modification
Get Access
 2.00
On Aircraft
Modify THS Torsion Box and apply the Corrosion
Prevention in Zone 330
3.00
Modify THS Torsion Box and apply the Corrosion
Prevention in Zone 340
3.00
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 6
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 13

@A350
SERVICE BULLETIN
Task 55P003-831-942-001: Modification
Close-Up
 2.00
TOTAL MANHOURS
 10.00
ELAPSED TIME (HOURS)
 5.00
NOTE
: For an explanation of the man-hours and elapsed time, refer to the Gantt
Chart, Fig. A-SAAAB
 given in Appendix 01 .
**CONF 003
Task 55P003-831-942-001: Modification
Get Access
 11.00
On Aircraft
Apply the Corrosion Prevention at the Rear Spar in
Zone 330
2.00
Apply the Corrosion Prevention in Zone 330
 7.00
Apply the Corrosion Prevention to the Rear Spar in
Zone 340
2.00
Apply the Corrosion Prevention in Zone 340
 7.00
Modify THS Torsion Box and apply the Corrosion
Prevention in Zone 330
3.00
Modify THS Torsion Box and apply the Corrosion
Prevention in Zone 340
3.00
Apply the Corrosion Prevention to the Front Spar in
Zone 335
2.00
Apply the Corrosion Prevention at the Elevator in Zone
335
3.00
Apply the Corrosion Prevention to the Front Spar in
Zone 345
2.00
Apply the Corrosion Prevention at the Elevator in Zone
345
3.00
Reidentify the Elevator in Zone 335
 0.50
Reidentify the Elevator in Zone 345
 0.50
Close-Up
 11.00
TOTAL MANHOURS
 57.00
ELAPSED TIME (HOURS)
 21.00
**CONF ALL
H. WEIGHT AND BALANCE
**CONF 001, 003
Manufacturers Empty Weight 0.44 KG (+0.9700 LB)
Effect on Balance 30.35 KGM (+219.521 LB.FT )
**CONF 002
Not Changed
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 7
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 14

@A350
SERVICE BULLETIN
**CONF ALL
I. ELECTRICAL LOAD DATA
Not Changed
J. REFERENCES
**CONF 001
Aircraft Structural Repair (ASR)
 51-24-XX 51-44-21
Consumable Material List (CML)
ATA Common Support Data Dictionary (CSDD),
Chapter 2
Electrical Standard Practices (ESP)
 20-55-XX
Maintenance Procedure (MP)
 11-XX-XX 24-41-00 24-41-XX
55-13-71 55-15-61
Process and Material Specification (PMS)
 Process and Material Specification
(PMS) 01-03-51
Process and Material Specification
(PMS) 01-06-12
System Description (SD)
 06-20-00
Standards Manual (SM)
**CONF 002
Aircraft Structural Repair (ASR)
 51-24-XX 51-44-21
Consumable Material List (CML)
Electrical Standard Practices (ESP)
 20-55-XX
Maintenance Procedure (MP)
 11-XX-XX 24-41-00 24-41-XX
55-13-71 55-15-61
Process and Material Specification (PMS)
 Process and Material Specification
(PMS) 01-03-51
System Description (SD)
 06-20-00
**CONF 003
Aircraft Structural Repair (ASR)
 51-24-XX 51-44-21
Consumable Material List (CML)
ATA Common Support Data Dictionary (CSDD),
Chapter 2
Electrical Standard Practices (ESP)
 20-55-XX
Maintenance Procedure (MP)
 11-XX-XX 24-41-00 24-41-XX
55-13-71 55-15-61
Process and Material Specification (PMS)
 Process and Material Specification
(PMS) 01-03-51
Process and Material Specification
(PMS) 01-06-12
System Description (SD)
 06-20-00
Standards Manual (SM)
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 8
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 15

@A350
SERVICE BULLETIN
**CONF ALL
K. PUBLICATION AFFECTED
**CONF 001, 003
Maintenance Illustrated Part Data (MIPD)
 27-34-71
**CONF 002
None
**CONF ALL
L. INTERCHANGEABILITY/MIXABILITY
**CONF 001
DESCRIPTION
 OLD PART N˚
 NEW PART N˚
 INT
 MIXABILITY
 SEE
NOTES
Elevator Assy
 WW030AGABAAA
 WW030AQABAAA
 01
 Not
Applicable
Elevator Assy
 WW031AFABAAA
 WW031APABAAA
 01
 Not
Applicable
NOTE
: For definitions of interchangeability codes in column INT., refer to ATA
Common Support Data Dictionary (CSDD), Chapter 2.
**CONF 002
Not Applicable
**CONF 003
DESCRIPTION
 OLD PART N˚
 NEW PART N˚
 INT
 MIXABILITY
 SEE
NOTES
Elevator Assy
 WW030AHABAAA
 WW030AKABAAA
 01
 Not
Applicable
Elevator Assy
 WW031AGABAAA
 WW031AJABAAA
 01
 Not
Applicable
NOTE
: For definitions of interchangeability codes in column INT., refer to ATA
Common Support Data Dictionary (CSDD), Chapter 2.
**CONF ALL
M. SPARES
Elevator Assy WW030A GABAAA
Elevator Assy WW030A HABAAA
Elevator Assy WW031A FABAAA
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 9
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 16

@A350
SERVICE BULLETIN
Elevator Assy WW031A GABAAA
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 10
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 17

@A350
SERVICE BULLETIN
2. MATERIAL INFORMATION
**CONF ALL
A. MATERIAL - PRICE AND AVAILABILITY
(1) Procurement Addresses
Component COMPC01
 Customers with aircraft shown in the
effectivity of this Service Bulletin should send
a purchase order to AIRBUS. Quote the
number of this Service Bulletin. The address
is:
AIRBUS Material, Logistics and Suppliers
IFD - In Flight Desk
Weg beim Jaeger 150
D-22335 Hamburg
Germany
For ordering by internet:
http://spares.airbus.com
For ordering by fax: +49 40 50 76 4012
For ordering by E-mail:
ifd.spares@airbus.com
(2) Price and Availability
Operator supplied AIRBUS parts required to accomplish this Service Bulletin are to be
purchased by a spares purchase order.
B. INDUSTRY SUPPORT INFORMATION
For aircraft under warranty at Aug 31/20, AIRBUS will share the costs of accomplishment of
this Service Bulletin by providing the operator supplied AIRBUS parts at no charge for orders
placed before Aug 31/20.
C. LIST OF COMPONENTS
No Kit
D. LIST OF MATERIALS - OPERATOR SUPPLIED
(1) Consumable Materials
Consumable CMLC01
ITEM
 DESCRIPTION
 REFERENCE TO CML
MAT. No.
QTY PER A/C
 SEE
NOTES
Clear Coat Polyurethane-Chromate
Free - External
04MDA3
 As required
Coating - Flexible Structure
 04QAB2
 As required
Polysulfide Sealant-General
Purpose Fillet
06AAB1
 As required
Non Aqueous Cleaner-General
 08BAA9
 As required
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 11
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 18

@A350
SERVICE BULLETIN
ITEM
 DESCRIPTION
 REFERENCE TO CML
MAT. No.
QTY PER A/C
 SEE
NOTES
Corrosion Preventive Compound-
Heavy Duty Long Dur
12AEB1
 As required
Laminating Resin-Epoxy Srm Type
2
13EBC1
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
Consumable CMLC02
ITEM
 DESCRIPTION
 REFERENCE TO CML
MAT. No.
QTY PER A/C
 SEE
NOTES
Coating - Flexible Structure
 04QAB2
 As required
Polysulfide Sealant-General
Purpose Fillet
06AAB1
 As required
Non Aqueous Cleaner-General
 08BAA9
 As required
Laminating Resin-Epoxy Srm Type
2
13EBC1
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
(2) Components
Component COMPC01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 ITEM
 OLD PART N˚
 INT
 SEE
NOTES
1
 ABS0970-72
 2
 PLATE
NOTE
: If you find part numbers of hardware components in the related kit(s)
which you cannot identify in the LIST OF COMPONENTS of this Service
Bulletin, refer to Standards Manual (SM). The SM will give you the
correct part number to part number relationship.
NOTE
: This Matset contains items with a Shelf Life of less than 24 months
which must be ordered when you intend to accomplish the Service
Bulletin.
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
(3) Equipment
None
E. PARTS TO BE RE-IDENTIFIED BY OPERATOR
Reidentified part set REIDC01
ITEM
 NEW PART N˚
 KEYWORD
 ITEM
 OLD PART N˚
 SEE
NOTES
WW030AQABAAA
 WW030AGABAAA
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 12
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 19

@A350
SERVICE BULLETIN
ITEM
 NEW PART N˚
 KEYWORD
 ITEM
 OLD PART N˚
 SEE
NOTES
WW031APABAAA
 WW031AFABAAA
Reidentified part set REIDC02
ITEM
 NEW PART N˚
 KEYWORD
 ITEM
 OLD PART N˚
 SEE
NOTES
WW030AKABAAA
 WW030AHABAAA
WW031AJABAAA
 WW031AGABAAA
F. TOOLING
None
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 13
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 20

@A350
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 14
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 21

@A350
SERVICE BULLETIN
3. ACCOMPLISHMENT INSTRUCTIONS
Task 55P003-831-942-001 - Modification
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
WARNING
: MAKE SURE THAT THE SAFETY DEVICES AND THE WARNING NOTICES ARE
IN POSITION BEFORE YOU START A TASK ON OR NEAR:
- THE FLIGHT CONTROLS
- THE FLIGHT CONTROL SURFACES
- THE LANDING GEAR AND THE RELATED DOORS
- COMPONENTS THAT MOVE.
MOVEMENT OF COMPONENTS CAN KILL OR INJURE PERSONS.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION REFER TO ESP Task A350-A-20-55-
XX-01ZZZ-042Z-A.
CAUTION
: DO NOT APPLY TEMPORARY PROTECTION SYSTEM (TPS) ON THE
INSPECTION AREA. IF YOU APPLY TPS ON THE INSPECTION AREA YOU
CAN CAUSE DAMAGE TO THE AIRCRAFT.
CAUTION
: MAKE SURE THAT YOU DO NOT CAUSE DAMAGE TO THE SURFACES.
THESE COMPONENTS ARE MADE OF CARBON FIBER REINFORCED
PLASTIC.
NOTE
: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
’refer to’ are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words ’in
accordance with’ are used then the given procedure must be followed.
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 15
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 22

@A350
SERVICE BULLETIN
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE
: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE
: This Service Bulletin is classified mandatory or expected to be classified mandatory
by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.D. in these
accomplishment instructions are Required for Compliance (RC) and must be done
to comply with the AD. To allow more flexibility, the rule "refer to" and "in
accordance with" will apply to these paragraphs 3.C. and 3.D. Other paragraphs
are recommended and may be deviated from, done as part of other actions or
done with accepted methods different from those given in the Service Bulletin, as
long as the RC paragraphs can be done and the aircraft can be put back into a
serviceable condition.
NOTE
: This Service Bulletin contains the instructions for the on-aircraft maintenance
necessary to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions contained herein, contact AIRBUS for further
instructions and approval.
Task Associated Data
**CONF 001
Zone
310 330 335 340 345
Manpower
TOTAL MANHOURS
 57.00
ELAPSED TIME (HOURS)
 21.00
**CONF 002
Zone
310 330 340
Manpower
TOTAL MANHOURS
 10.00
ELAPSED TIME (HOURS)
 5.00
**CONF 003
Zone
310 330 335 340 345
Manpower
TOTAL MANHOURS
 57.00
ELAPSED TIME (HOURS)
 21.00
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 16
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 23

@A350
SERVICE BULLETIN
**CONF ALL
A. GENERAL
**CONF 001
(1) Subtask 55P003-910-601-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Structural Repair (ASR)
 Task A350-A-51-24-XX-01ZZZ-667Z-A
Task A350-A-51-44-21-01ZZZ-667Z-A
Consumable Material List (CML)
Maintenance Procedure (MP)
 Task A350-A-11-XX-XX-00ZZZ-691Z-A
System Description (SD)
 Task A350-A-06-20-00-01ZZZ-04CZ-A
(a) For the identification of zones, refer to SD Task A350-A-06- 20-00-01ZZZ-04CZ-A.
(b) Get drill data and drilling requirements, in accordance with ASR Task A350-
A-51-44-21-01ZZZ-667Z-A.
(c) For the specification of Material Numbers (Mat. No.) given in this Service Bulletin,
refer to the Consumable Materials List (CML).
(d) Apply sealant in accordance with ASR Task A350-A-51-24-XX-01ZZZ-667Z-A.
(e) For the installation of placards, ref er to MP Task A350-A-11-XX-XX-00ZZZ-691Z-A.
(2) Subtask 55P003-839-601-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 002
(1) Subtask 55P003-910-601-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Structural Repair (ASR)
 Task A350-A-51-24-XX-01ZZZ-667Z-A
Task A350-A-51-44-21-01ZZZ-667Z-A
Consumable Material List (CML)
Maintenance Procedure (MP)
 Task A350-A-11-XX-XX-00ZZZ-691Z-A
System Description (SD)
 Task A350-A-06-20-00-01ZZZ-04CZ-A
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 17
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 24

@A350
SERVICE BULLETIN
(a) For the identification of zones, refer to SD Task A350-A-06- 20-00-01ZZZ-04CZ-A.
(b) Get drill data and drilling requirements, in accordance with ASR Task A350-
A-51-44-21-01ZZZ-667Z-A.
(c) For the specification of Material Numbers (Mat. No.) given in this Service Bulletin,
refer to the Consumable Materials List (CML).
(d) Apply sealant in accordance with ASR Task A350-A-51-24-XX-01ZZZ-667Z-A.
(e) For the installation of placards, ref er to MP Task A350-A-11-XX-XX-00ZZZ-691Z-A.
(2) Subtask 55P003-839-601-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 003
(1) Subtask 55P003-910-601-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Structural Repair (ASR)
 Task A350-A-51-24-XX-01ZZZ-667Z-A
Task A350-A-51-44-21-01ZZZ-667Z-A
Consumable Material List (CML)
Maintenance Procedure (MP)
 Task A350-A-11-XX-XX-00ZZZ-691Z-A
System Description (SD)
 Task A350-A-06-20-00-01ZZZ-04CZ-A
(a) For the identification of zones, refer to SD Task A350-A-06- 20-00-01ZZZ-04CZ-A.
(b) Get drill data and drilling requirements, in accordance with ASR Task A350-
A-51-44-21-01ZZZ-667Z-A.
(c) For the specification of Material Numbers (Mat. No.) given in this Service Bulletin,
refer to the Consumable Materials List (CML).
(d) Apply sealant in accordance with ASR Task A350-A-51-24-XX-01ZZZ-667Z-A.
(e) For the installation of placards, ref er to MP Task A350-A-11-XX-XX-00ZZZ-691Z-A.
(2) Subtask 55P003-839-601-001 - Administrative
Manpower Resources
Skills
 NON SPECIFIC
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 18
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 25

@A350
SERVICE BULLETIN
**CONF ALL
B. PREPARATION
**CONF 001
(1) Subtask 55P003-941-601-001 - Job Set-up
Work Zones and Access Panels
Zone
 Access/Work location
310
330
340
Manpower Resources
Skills
 NON SPECIFIC
References
Maintenance Procedure (MP)
 Task A350-A-24-41-00-00ZZZ-170Z-A
Task A350-A-24-41-XX-00ZZZ-761Z-A
Task A350-A-55-13-71-00ZZZ-398Z-A
Task A350-A-55-13-71-00ZZZ-520Z-A
Task A350-A-55-15-61-00ZZZ-520Z-A
Task A350-A-55-15-61-00ZZZ-520Z-A
NOTE
: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
- Aircraft on the ground resting on landing gear (the ground safety
locks and the wheel chocks are in position on the landing gear)
- Engine shut down, thrust reversers closed and locked
- Aircraft in clean configuration
- Parking brake applied
- Aircraft electrical network de-energized
- Hydraulic system s depressurized
- Access to the cockpit and cabin is available
- All circuit breakers are in closed position
- All controls in NORM, AUTO or OFF position.
(a) Make sure that the aircraft is electrically grounded, refer to MP Task A350-
A-24-41-00-00ZZZ-170Z-A.
(b) Energize the aircraft electrical circuits, refer to MP Task A350-A-24-41-
XX-00ZZZ-761Z-A.
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 19
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 26

@A350
SERVICE BULLETIN
(c) In zone 310, put an access platform 4m (13FT) adjustable below the maintenance
doors 311AB and 311BB.
(d) Open the maintenance doors 311AB, 311BB and 314AR and secure the
maintenance doors in open position.
(e) In zone 330 and zone 340 open the access panels 334AB (344AB), 334BB
(344BB), 334CB (344CB), 334DB (344DB) and 334EB(344EB), refer to MP Task
A350-A-55-13-71-00ZZZ-398Z-A.
(f) In zone 330 and zone 340 remove the access panels 334AT (344AT), 334BT
(344BT), 334CT (344CT), 334DT (344DT) and 334ET (344ET), refer to MP Task
A350-A-55-13-71-00ZZZ-520Z-A.
(g) In zone 330 and zone 340 remove the panels 333AT (343AT) and 333AB (343AB),
refer to MP Task A350-A- 55-15-61-00ZZZ-520Z-A.
**CONF 002
(1) Subtask 55P003-941-601-002 - Job Set-up
Manpower Resources
Skills
 NON SPECIFIC
References
Maintenance Procedure (MP)
 Task A350-A-24-41-00-00ZZZ-170Z-A
Task A350-A-24-41-XX-00ZZZ-761Z-A
Task A350-A-55-13-71-00ZZZ-398Z-A
Task A350-A-55-13-71-00ZZZ-520Z-A
Task A350-A-55-15-61-00ZZZ-520Z-A
NOTE
: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
- Aircraft on the ground resting on landing gear (the ground safety
locks and the wheel chocks are in position on the landing gear)
- Engine shut down, thrust reversers closed and locked
- Aircraft in clean configuration
- Parking brake applied
- Aircraft electrical network de-energized
- Hydraulic system s depressurized
- Access to the cockpit and cabin is available
- All circuit breakers are in closed position
- All controls in NORM, AUTO or OFF position.
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 20
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 27

@A350
SERVICE BULLETIN
(a) Make sure that the aircraft is electrically grounded, refer to MP Task A350-
A-24-41-00-00ZZZ-170Z-A.
(b) Energize the aircraft electrical circuits, refer to MP Task A350-A-24-41-
XX-00ZZZ-761Z-A.
(c) In zone 310, put an access platform 4m (13FT) adjustable below the maintenance
doors 311AB and 311BB.
(d) Open the maintenance doors 311AB, 311BB and 314AR and secure the
maintenance doors in open position.
(e) In zone 330 and zone 340 open the access panels 334AB (344AB), refer to MP
Task A350-A-55-13-71-00ZZZ-398Z-A.
(f) In zone 330 and zone 340 remove the access panels 334AT (344AT), refer to MP
Task A350-A-55-13-71-00ZZZ-520Z-A.
(g) In zone 330 and zone 340 remove the panels 333AT (343AT) and 333AB (343AB),
refer to MP Task A350-A- 55-15-61-00ZZZ-520Z-A.
**CONF 003
(1) Subtask 55P003-941-601-001 - Job Set-up
Work Zones and Access Panels
Zone
 Access/Work location
310
330
340
Manpower Resources
Skills
 NON SPECIFIC
References
Maintenance Procedure (MP)
 Task A350-A-24-41-00-00ZZZ-170Z-A
Task A350-A-24-41-XX-00ZZZ-761Z-A
Task A350-A-55-13-71-00ZZZ-398Z-A
Task A350-A-55-13-71-00ZZZ-520Z-A
Task A350-A-55-15-61-00ZZZ-520Z-A
Task A350-A-55-15-61-00ZZZ-520Z-A
NOTE
: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
- Aircraft on the ground resting on landing gear (the ground safety
locks and the wheel chocks are in position on the landing gear)
- Engine shut down, thrust reversers closed and locked
- Aircraft in clean configuration
- Parking brake applied
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 21
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 28

@A350
SERVICE BULLETIN
- Aircraft electrical network de-energized
- Hydraulic system s depressurized
- Access to the cockpit and cabin is available
- All circuit breakers are in closed position
- All controls in NORM, AUTO or OFF position.
(a) Make sure that the aircraft is electrically grounded, refer to MP Task A350-
A-24-41-00-00ZZZ-170Z-A.
(b) Energize the aircraft electrical circuits, refer to MP Task A350-A-24-41-
XX-00ZZZ-761Z-A.
(c) In zone 310, put an access platform 4m (13FT) adjustable below the maintenance
doors 311AB and 311BB.
(d) Open the maintenance doors 311AB, 311BB and 314AR and secure the
maintenance doors in open position.
(e) In zone 330 and zone 340 open the access panels 334AB (344AB), 334BB
(344BB), 334CB (344CB), 334DB (344DB) and 334EB(344EB), refer to MP Task
A350-A-55-13-71-00ZZZ-398Z-A.
(f) In zone 330 and zone 340 remove the access panels 334AT (344AT), 334BT
(344BT), 334CT (344CT), 334DT (344DT) and 334ET (344ET), refer to MP Task
A350-A-55-13-71-00ZZZ-520Z-A.
(g) In zone 330 and zone 340 remove the panels 333AT (343AT) and 333AB (343AB),
refer to MP Task A350-A- 55-15-61-00ZZZ-520Z-A.
**CONF ALL
C. PROCEDURE
**CONF 001
(1) Subtask 55P003-831-607-001 - Apply the Corrosion Prevention at the Rear Spar in
Zone 330
Work Zones and Access Panels
Zone
 Access/Work location
330
Manpower Resources
Manhours
 2.00
Minimum number of person
 2
Subtask elapsed time
 1.00
Skills
 AIRFRAME
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 22
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 29

@A350
SERVICE BULLETIN
Material necessary to do the job
Consumable CMLC01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Coating - Flexible Structure
 04QAB2
 As required
Polysulfide Sealant-General
Purpose Fillet
06AAB1
 As required
Non Aqueous Cleaner-
General
08BAA9
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
References
Fig. A-SBAAA
Application of Sealant to the THS
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Sheet 05
Sheet 06
Sheet 07
(a) Apply the material combination of Polysulfide Sealant-General Purpose Fillet and
Coating - Flexible Structure all along at the outer corner areas of the outer rear
spar to the upper skin joint, as shown on Fig. A-SBAAA Sheet 01
 , Fig. A-SBAAA
Sheet 02
,V i e wBa n dS e c t i o nA - A ,Fig. A-SBAAA Sheet 03
,V i e wDa n dS e c t i o nB -
B, Fig. A-SBAAA Sheet 04
 ,V i e wEa n dS e c t i o nC - C ,Fig. A-SBAAA Sheet 05
 ,
Section D-D.
1
 Clean the area with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 At the outer corner areas of the rear spar, the upper skin, as shown on Fig. A-
SBAAA Sheet 02
, Section A-A, apply:
Polysulfide Sealant-
General Purpose
Fillet
06AAB1 As required
3
 After the drying process of the Polysulfide Sealant-General Purpose Fillet,
apply to the dried sealant:
Coating - Flexible
Structure
04QAB2 As required
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 23
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 30

@A350
SERVICE BULLETIN
(b) Apply the material combination of Polysulfide Sealant-General Purpose Fillet and
Coating - Flexible Structure all along at the outer corner areas of the outer rear
spar to the lower skin joint, as shown on Fig. A-SBAAA Sheet 01
 , Fig. A-SBAAA
Sheet 02
,V i e wBa n dS e c t i o nA - A ,Fig. A-SBAAA Sheet 03
,V i e wDa n dS e c t i o nB -
B, Fig. A-SBAAA Sheet 04
 ,V i e wEa n dS e c t i o nC - C ,Fig. A-SBAAA Sheet 05
 ,
Section D-D.
1
 Clean the area with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 At the outer corner areas of the rear spar and the lower skin, as shown on
Fig. A-SBAAA Sheet 02
, Section A-A, apply:
Polysulfide Sealant-
General Purpose
Fillet
06AAB1 As required
3
 After the drying process of the Polysulfide Sealant-General Purpose Fillet,
apply to the dried sealant:
Coating - Flexible
Structure
04QAB2 As required
(c) Apply corrosion protection at the Bearing Ribs (BR)6, BR7, BR10, BR11, BR13,
BR15 and BR16, as shown on Fig. A-SBAAA Sheet 01
, View A and Fig. A-SBAAA
Sheet 06
,V i e wG ,V i e wH ,S e c t i o nE - Ea n dS e c t i o nF - F .
1
 Clean the edges of BRs to the rear spar, the upper skin and the lower skin,
with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 To the edges of the BRs to the upper skin and the lower skin, apply:
Polysulfide Sealant-
General Purpose
Fillet
06AAB1 As required
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 24
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 31

@A350
SERVICE BULLETIN
3
 After the drying process of the Polysulfide Sealant-General Purpose Fillet,
apply to the dried sealant:
Coating - Flexible
Structure
04QAB2 As required
(2) Subtask 55P003-831-601-001 - Apply t he Corrosion Prevention in Zone 330
Work Zones and Access Panels
Zone
 Access/Work location
330
Manpower Resources
Manhours
 7.00
Minimum number of person
 2
Subtask elapsed time
 3.50
Skills
 AIRFRAME
Material necessary to do the job
Consumable CMLC01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Coating - Flexible Structure
 04QAB2
 As required
Polysulfide Sealant-General
Purpose Fillet
06AAB1
 As required
Non Aqueous Cleaner-
General
08BAA9
 As required
Corrosion Preventive
Compound-Heavy Duty
Long Dur
12AEB1
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
References
Fig. A-SBAAA
Application of Sealant to the THS
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Sheet 05
Sheet 06
Sheet 07
NOTE
: Mask before applying protection all non metallic supports, electrical
harnesses, seals, hydraulic hoses and movable parts.
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 25
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 32

@A350
SERVICE BULLETIN
(a) Apply the corrosion protection between RIB1 and RIB2, at the rear spar, as shown
on Fig. A-SBAAA Sheet 01
 and Fig. A-SBAAA Sheet 02
, View B and Section A-A.
1
 Clean the area with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 Between RIB1 and RIB2, at the rear spar, apply:
Corrosion
Preventive
Compound-Heavy
Duty Long Dur
12AEB1 As required
(b) Apply the corrosion protection in the area of pivot attachment fitting, rear spar,
upper skin and lower skin, as shown on Fig. A-SBAAA Sheet 01
, View C and Fig.
A-SBAAA Sheet 03
,V i e wDa n dS e c t i o nB - B .
1
 Clean the area with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 Apply, as shown on Fig. A-SBAAA Sheet 03
,V i e wDa n dS e c t i o nB - B :
Corrosion
Preventive
Compound-Heavy
Duty Long Dur
12AEB1 As required
(c) Apply corrosion protection at RIB4, lower skin, rear spar and upper skin, as shown
on Fig. A-SBAAA Sheet 01
 , View A and Fig. A-SBAAA Sheet 04
 , View E and
Section C-C.
1
 Clean the area with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 26
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 33

@A350
SERVICE BULLETIN
2
 At RIB4, lower skin, rear spar and upper skin, apply:
Corrosion
Preventive
Compound-Heavy
Duty Long Dur
12AEB1 As required
(d) Apply corrosion protection at RIB12, lower skin, rear spar and upper skin, as shown
on Fig. A-SBAAA Sheet 01
 , View A and Fig. A-SBAAA Sheet 05
 ,V i e wFa n d
Section D-D.
1
 Clean the area with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 At RIB12, lower skin, rear spar and upper skin, apply:
Corrosion
Preventive
Compound-Heavy
Duty Long Dur
12AEB1 As required
(e) Apply corrosion protection at the Bearing Ribs (BR)6, BR7, BR10, BR11, BR13,
BR15 and BR16, as shown on Fig. A-SBAAA Sheet 01
, View A and Fig. A-SBAAA
Sheet 06
, View G and View H and Section E-E and F-F.
1
 Clean the edges of BRs to the rear spar, the upper skin and the lower skin,
with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 Apply to the corners of the rear spar and BR to the upper skin and the lower
skin apply, as shown on Fig. A-SBAAA Sheet 06
, View H and Section F-F:
Corrosion
Preventive
Compound-Heavy
Duty Long Dur
12AEB1 As required
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 27
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 34

@A350
SERVICE BULLETIN
(f) Apply the corrosion protection, at the rear spar and the attachment fitting of the
TER2, as shown on Fig. A-SBAAA Sheet 01
, View A and Fig. A-SBAAA Sheet 07
,
View J.
1
 Clean the sealing area with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 To the nuts at the TER2 attachment fitting and the edge of the TER2
attachment fitting to the rear spar, apply:
Polysulfide Sealant-
General Purpose
Fillet
06AAB1 As required
3
 After the drying process of the Polysulfide Sealant-General Purpose Fillet,
apply to the dried sealant at the edge of the TER2 attachment fitting to the
rear spar:
Coating - Flexible
Structure
04QAB2 As required
4
 After the drying process of the Coating - Flexible Structure and the Polysulfide
Sealant-General Purpose Fillet apply to the nuts at the TER2 attachment
fitting, as shown on Fig. A-SBAAA Sheet 07
, View J and Section G-G:
Corrosion
Preventive
Compound-Heavy
Duty Long Dur
12AEB1 As required
(3) Subtask 55P003-831-608-001 - Apply the Corrosion Prevention to the Rear Spar in
Zone 340
Work Zones and Access Panels
Zone
 Access/Work location
340
Manpower Resources
Manhours
 2.00
Minimum number of person
 1
Subtask elapsed time
 1.00
Skills
 AIRFRAME
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 28
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 35

@A350
SERVICE BULLETIN
Material necessary to do the job
Consumable CMLC01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Coating - Flexible Structure
 04QAB2
 As required
Polysulfide Sealant-General
Purpose Fillet
06AAB1
 As required
Non Aqueous Cleaner-
General
08BAA9
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
References
Fig. A-SBAAA
Application of Sealant to the THS
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Sheet 05
Sheet 06
Sheet 07
(a) Apply the material combination of Polysulfide Sealant-General Purpose Fillet and
Coating - Flexible Structure all along at the outer corner areas of the outer rear
spar to the upper skin joint, as shown on Fig. A-SBAAA Sheet 01
 , Fig. A-SBAAA
Sheet 02
,V i e wBa n dS e c t i o nA - A ,Fig. A-SBAAA Sheet 03
,V i e wDa n dS e c t i o nB -
B, Fig. A-SBAAA Sheet 04
 ,V i e wEa n dS e c t i o nC - C ,Fig. A-SBAAA Sheet 05
 ,
Section D-D.
1
 Clean the area with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 At the outer corner areas of the rear spar, the upper skin, as shown on Fig. A-
SBAAA Sheet 02
, Section A-A, apply:
Polysulfide Sealant-
General Purpose
Fillet
06AAB1 As required
3
 After the drying process of the Polysulfide Sealant-General Purpose Fillet,
apply to the dried sealant:
Coating - Flexible
Structure
04QAB2 As required
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 29
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 36

@A350
SERVICE BULLETIN
(b) Apply the material combination of Polysulfide Sealant-General Purpose Fillet and
Coating - Flexible Structure all along at the outer corner areas of the outer rear
spar to the lower skin joint, as shown on Fig. A-SBAAA Sheet 01
 , Fig. A-SBAAA
Sheet 02
,V i e wBa n dS e c t i o nA - A ,Fig. A-SBAAA Sheet 03
,V i e wDa n dS e c t i o nB -
B, Fig. A-SBAAA Sheet 04
 ,V i e wEa n dS e c t i o nC - C ,Fig. A-SBAAA Sheet 05
 ,
Section D-D.
1
 Clean the area with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 At the outer corner areas of the rear spar and the lower skin, as shown on
Fig. A-SBAAA Sheet 02
, Section A-A, apply:
Polysulfide Sealant-
General Purpose
Fillet
06AAB1 As required
3
 After the drying process of the Polysulfide Sealant-General Purpose Fillet,
apply to the dried sealant:
Coating - Flexible
Structure
04QAB2 As required
(c) Apply corrosion protection at the Bearing Ribs (BR)6, BR7, BR10, BR11, BR13,
BR15 and BR16, as shown on Fig. A-SBAAA Sheet 01
, View A and Fig. A-SBAAA
Sheet 06
,V i e wG ,V i e wH ,S e c t i o nE - Ea n dS e c t i o nF - F .
1
 Clean the edges of BRs to the rear spar, the upper skin and the lower skin,
with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 To the edges of the BRs to the upper skin and the lower skin, apply:
Polysulfide Sealant-
General Purpose
Fillet
06AAB1 As required
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 30
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 37

@A350
SERVICE BULLETIN
3
 After the drying process of the Polysulfide Sealant-General Purpose Fillet,
apply to the dried sealant:
Coating - Flexible
Structure
04QAB2 As required
(4) Subtask 55P003-831-602-001 - Apply t he Corrosion Prevention in Zone 340
Work Zones and Access Panels
Zone
 Access/Work location
340
Manpower Resources
Manhours
 7.00
Minimum number of person
 2
Subtask elapsed time
 3.50
Skills
 AIRFRAME
Material necessary to do the job
Consumable CMLC01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Coating - Flexible Structure
 04QAB2
 As required
Polysulfide Sealant-General
Purpose Fillet
06AAB1
 As required
Non Aqueous Cleaner-
General
08BAA9
 As required
Corrosion Preventive
Compound-Heavy Duty
Long Dur
12AEB1
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
References
Fig. A-SBAAA
Application of Sealant to the THS
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Sheet 05
Sheet 06
Sheet 07
NOTE
: Mask before applying protection all non metallic supports, electrical
harnesses, seals, hydraulic hoses and movable parts.
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 31
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 38

@A350
SERVICE BULLETIN
(a) Apply the corrosion protection between RIB1 and RIB2, at the rear spar, as shown
on Fig. A-SBAAA Sheet 01
 and Fig. A-SBAAA Sheet 02
, View B and Section A-A.
1
 Clean the area with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 Between RIB1 and RIB2, at the rear spar, apply:
Corrosion
Preventive
Compound-Heavy
Duty Long Dur
12AEB1 As required
(b) Apply the corrosion protection in the area of pivot attachment fitting, rear spar,
upper skin and lower skin, as shown on Fig. A-SBAAA Sheet 01
, View C and Fig.
A-SBAAA Sheet 03
,V i e wDa n dS e c t i o nB - B .
1
 Clean the area with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 Apply, as shown on Fig. A-SBAAA Sheet 03
,V i e wDa n dS e c t i o nB - B :
Corrosion
Preventive
Compound-Heavy
Duty Long Dur
12AEB1 As required
(c) Apply corrosion protection at RIB4, lower skin, rear spar and upper skin, as shown
on Fig. A-SBAAA Sheet 01
 , View A and Fig. A-SBAAA Sheet 04
 , View E and
Section C-C.
1
 Clean the area with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 32
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 39

@A350
SERVICE BULLETIN
2
 At RIB4, lower skin, rear spar and upper skin, apply:
Corrosion
Preventive
Compound-Heavy
Duty Long Dur
12AEB1 As required
(d) Apply corrosion protection at RIB12, lower skin, rear spar and upper skin, as shown
on Fig. A-SBAAA Sheet 01
 , View A and Fig. A-SBAAA Sheet 05
 ,V i e wFa n d
Section D-D.
1
 Clean the area with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 At RIB12, lower skin, rear spar and upper skin, apply:
Corrosion
Preventive
Compound-Heavy
Duty Long Dur
12AEB1 As required
(e) Apply corrosion protection at the Bearing Ribs (BR)6, BR7, BR10, BR11, BR13,
BR15 and BR16, as shown on Fig. A-SBAAA Sheet 01
, View A and Fig. A-SBAAA
Sheet 06
, View G and View H and Section E-E and F-F.
1
 Clean the edges of BRs to the rear spar, the upper skin and the lower skin,
with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 Apply to the corners of the rear spar and BR to the upper skin and the lower
skin apply, as shown on Fig. A-SBAAA Sheet 06
, View H and Section F-F:
Corrosion
Preventive
Compound-Heavy
Duty Long Dur
12AEB1 As required
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 33
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 40

@A350
SERVICE BULLETIN
(f) Apply the corrosion protection, at the rear spar and the attachment fitting of the
TER2, as shown on Fig. A-SBAAA Sheet 01
, View A and Fig. A-SBAAA Sheet 07
,
View J.
1
 Clean the sealing area with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 To the nuts at the TER2 attachment fitting and the edge of the TER2
attachment fitting to the rear spar, apply:
Polysulfide Sealant-
General Purpose
Fillet
06AAB1 As required
3
 After the drying process of the Polysulfide Sealant-General Purpose Fillet,
apply to the dried sealant at the edge of the TER2 attachment fitting to the
rear spar:
Coating - Flexible
Structure
04QAB2 As required
4
 After the drying process of the Coating - Flexible Structure and the Polysulfide
Sealant-General Purpose Fillet apply to the nuts at the TER2 attachment
fitting, as shown on Fig. A-SBAAA Sheet 07
, View J and Section G-G:
Corrosion
Preventive
Compound-Heavy
Duty Long Dur
12AEB1 As required
(5) Subtask 55P003-831-603-001 - Modify THS Torsion Box and apply the Corrosion
Prevention in Zone 330
Work Zones and Access Panels
Zone
 Access/Work location
330
Manpower Resources
Manhours
 3.00
Minimum number of person
 1
Subtask elapsed time
 3.00
Skills
 AIRFRAME
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 34
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 41

@A350
SERVICE BULLETIN
Material necessary to do the job
Consumable CMLC01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Coating - Flexible Structure
 04QAB2
 As required
Polysulfide Sealant-General
Purpose Fillet
06AAB1
 As required
Non Aqueous Cleaner-
General
08BAA9
 As required
Laminating Resin-Epoxy
Srm Type 2
13EBC1
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
References
Process and Material Specification
(PMS)
Process and Material Specification (PMS)
01-03-51
Fig. A-SBBAA
Modification of the THS
Sheet 01
Sheet 02
Sheet 03
NOTE
: Mask before applying protection all non metallic supports, electrical
harnesses, seals, hydraulic hoses and movable parts.
(a) Modify the lower skin of the torsion box of the THS.
Refer to Fig. A-SBBAA
.
1
 As shown Fig. A-SBBAA Sheet 02
 , View B, drill a drain hole into the lower
skin of the torsion box.
2
 As shown on Fig. A-SBBAA Sheet 03
, View C, deburr the hole and clean the
area around the hole at both side of the lower skin, with:
Non Aqueous
Cleaner-General
08BAA9 As required
Textile-Lint Free
Cotton
14SBA1 As required
3
 To prevent corrosion at the hole, apply in accordance with Process and
Material Specification (PMS) 01-03-51:
Laminating Resin-
Epoxy Srm Type 2
13EBC1 As required
4
 Clean the area at the edge of the inner rear spar and the lower skin, as shown
on Fig. A-SBBAA Sheet 03
Section A-A and View C, with:
Non Aqueous
Cleaner-General
08BAA9 As required
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 35
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 42

@A350
SERVICE BULLETIN
Textile-Lint Free
Cotton
14SBA1 As required
5
 To the cleaned area at the edge of the inner rear spar and the lower skin,
apply:
Polysulfide Sealant-
General Purpose
Fillet
06AAB1 As required
6
 After the drying process of the Polysulfide Sealant-General Purpose Fillet,
apply:
Coating - Flexible
Structure
04QAB2 As required
(6) Subtask 55P003-831-604-001 - Modify THS Torsion Box and apply the Corrosion
Prevention in Zone 340
Work Zones and Access Panels
Zone
 Access/Work location
340
Manpower Resources
Manhours
 3.00
Minimum number of person
 1
Subtask elapsed time
 3.00
Skills
 AIRFRAME
Material necessary to do the job
Consumable CMLC01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Coating - Flexible Structure
 04QAB2
 As required
Polysulfide Sealant-General
Purpose Fillet
06AAB1
 As required
Non Aqueous Cleaner-
General
08BAA9
 As required
Laminating Resin-Epoxy
Srm Type 2
13EBC1
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
References
Process and Material Specification
(PMS)
Process and Material Specification (PMS)
01-03-51
Fig. A-SBBAA
Modification of the THS
Sheet 01
Sheet 02
Sheet 03
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 36
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 43

@A350
SERVICE BULLETIN
NOTE
: Mask before applying protection all non metallic supports, electrical
harnesses, seals, hydraulic hoses and movable parts.
(a) Modify the lower skin of the torsion box of the THS.
Refer to Fig. A-SBBAA
.
1
 As shown Fig. A-SBBAA Sheet 02
 , View B, drill a drain hole into the lower
skin of the torsion box.
2
 As shown on Fig. A-SBBAA Sheet 03
, View C, deburr the hole and clean the
area around the hole at both side of the lower skin, with:
Non Aqueous
Cleaner-General
08BAA9 As required
Textile-Lint Free
Cotton
14SBA1 As required
3
 To prevent corrosion at the hole, apply in accordance with Process and
Material Specification (PMS) 01-03-51:
Laminating Resin-
Epoxy Srm Type 2
13EBC1 As required
.
4
 Clean the area at the edge of the inner rear spar and the lower skin, as shown
on Fig. A-SBBAA Sheet 03
Section A-A and View C, with:
Non Aqueous
Cleaner-General
08BAA9 As required
Textile-Lint Free
Cotton
14SBA1 As required
5
 To the cleaned area at the edge of the inner rear spar and the lower skin,
apply:
Polysulfide Sealant-
General Purpose
Fillet
06AAB1 As required
6
 After the drying process of the Polysulfide Sealant-General Purpose Fillet,
apply:
Coating - Flexible
Structure
04QAB2 As required
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 37
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 44

@A350
SERVICE BULLETIN
(7) Subtask 55P003-831-610-001 - Apply the Corrosion Prevention to the Front Spar in
Zone 335
Work Zones and Access Panels
Zone
 Access/Work location
335
Manpower Resources
Manhours
 2.00
Minimum number of person
 1
Subtask elapsed time
 2.00
Skills
 AIRFRAME
Material necessary to do the job
Consumable CMLC01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Coating - Flexible Structure
 04QAB2
Polysulfide Sealant-General
Purpose Fillet
06AAB1
 As required
Non Aqueous Cleaner-
General
08BAA9
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
References
Fig. A-SBCAA
Application of Sealant to the Elevator
Sheet 01
Sheet 02
(a) Apply corrosion protection all along the edge of the upper front spar to the upper
skin from the Elevator Rib (ER)1 to ER13, as shown on Fig. A-SBCAA Sheet 01
and Fig. A-SBCAA Sheet 02
 , View B and C and Section B-B.
1
 Clean the area with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 To the upper edge of the front spar to the upper skin from BR0 to BR13,
apply:
Polysulfide Sealant-
General Purpose
Fillet
06AAB1 As required
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 38
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 45

@A350
SERVICE BULLETIN
3
 After the drying process of the Polysulfide Sealant-General Purpose Fillet,
apply:
Coating - Flexible
Structure
04QAB2 As required
(8) Subtask 55P003-831-605-001 - Apply the Corrosion Prevention at the Elevator in
Zone 335
Work Zones and Access Panels
Zone
 Access/Work location
335
Manpower Resources
Manhours
 3.00
Minimum number of person
 1
Subtask elapsed time
 3.00
Skills
 AIRFRAME
Material necessary to do the job
Consumable CMLC01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Non Aqueous Cleaner-
General
08BAA9
 As required
Corrosion Preventive
Compound-Heavy Duty
Long Dur
12AEB1
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
References
Fig. A-SBCAA
Application of Sealant to the Elevator
Sheet 01
Sheet 02
NOTE
: Mask before applying protection all non metallic supports, electrical
harnesses, seals, hydraulic hoses and movable parts.
(a) Apply corrosion protection to the Hinge Fitting 4 at ER6, as shown on Fig. A-
SBCAA Sheet 01
 and Fig. A-SBCAA Sheet 02
 , View B and C and Section A-A.
1
 Clean the area with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 39
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 46

@A350
SERVICE BULLETIN
2
 As shown on Fig. A-SBCAA Sheet 02
 , View C and Section A-A, in the area of
the Hinge Fitting 4 at ER6, apply:
Corrosion
Preventive
Compound-Heavy
Duty Long Dur
12AEB1 As required
(9) Subtask 55P003-831-611-001 - Apply the Corrosion Prevention to the Front Spar in
Zone 345
Work Zones and Access Panels
Zone
 Access/Work location
345
Manpower Resources
Manhours
 2.00
Minimum number of person
 1
Subtask elapsed time
 2.00
Skills
 AIRFRAME
Material necessary to do the job
Consumable CMLC01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Coating - Flexible Structure
 04QAB2
Polysulfide Sealant-General
Purpose Fillet
06AAB1
 As required
Non Aqueous Cleaner-
General
08BAA9
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
References
Fig. A-SBCAA
Application of Sealant to the Elevator
Sheet 01
Sheet 02
(a) Apply corrosion protection all along the edge of the upper front spar to the upper
skin from the Elevator Rib (ER)1 to ER13, as shown on Fig. A-SBCAA Sheet 01
and Fig. A-SBCAA Sheet 02
 , View B and C and Section B-B.
1
 Clean the area with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 40
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 47

@A350
SERVICE BULLETIN
2
 To the upper edge of the front spar to the upper skin from BR0 to BR13,
apply:
Polysulfide Sealant-
General Purpose
Fillet
06AAB1 As required
3
 After the drying process of the Polysulfide Sealant-General Purpose Fillet,
apply:
Coating - Flexible
Structure
04QAB2 As required
(10) Subtask 55P003-831-606-001 - Apply the Corrosion Prevention at the Elevator in
Zone 345
Work Zones and Access Panels
Zone
 Access/Work location
345
Manpower Resources
Manhours
 3.00
Minimum number of person
 1
Subtask elapsed time
 3.00
Skills
 AIRFRAME
Material necessary to do the job
Consumable CMLC01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Non Aqueous Cleaner-
General
08BAA9
 As required
Corrosion Preventive
Compound-Heavy Duty
Long Dur
12AEB1
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
References
Fig. A-SBCAA
Application of Sealant to the Elevator
Sheet 01
Sheet 02
NOTE
: Mask before applying protection all non metallic supports, electrical
harnesses, seals, hydraulic hoses and movable parts.
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 41
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 48

@A350
SERVICE BULLETIN
(a) Apply corrosion protection to the Hinge Fitting 4 at ER6, as shown on Fig. A-
SBCAA Sheet 01
 and Fig. A-SBCAA Sheet 02
 , View B and C and Section A-A.
1
 Clean the area with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 As shown on Fig. A-SBCAA Sheet 02
 , View C and Section A-A, in the area of
the Hinge Fitting 4 at ER6, apply:
Corrosion
Preventive
Compound-Heavy
Duty Long Dur
12AEB1 As required
(11) Subtask 55P003-930- 602-001 - Reidentify the Elevator in Zone 335
Work Zones and Access Panels
Zone
 Access/Work location
335
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 NON SPECIFIC
Material necessary to do the job
Component COMPC01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 ABS0970-72
 1
 PLATE
NOTE
: This Matset contains items with a Shelf Life of less than 24 months
which must be ordered when you intend to accomplish the Service
Bulletin.
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
Reidentified part set REIDC01
ITEM
 NEW PART N˚
 KEYWORD
 ITEM
 OLD PART N˚
 SEE
NOTES
WW030AQABAAA
 WW030AGABAAA
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 42
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 49

@A350
SERVICE BULLETIN
Consumable CMLC01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Clear Coat Polyurethane-
Chromate Free - External
04MDA3
 As required
Non Aqueous Cleaner-
General
08BAA9
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
References
Process and Material Specification
(PMS)
Process and Material Specification (PMS)
01-06-12
Fig. A-SBDAA
Re-identification of the Elevator
Sheet 01
Sheet 02
(a) Reidentify the elevator in Zone 335, as shown on Fig. A-SBDAA Sheet 01
 and Fig.
A-SBDAA Sheet 02
.
1
 As shown on Fig. A-SBDAA Sheet 02
 at Rib ER4, in 335, install:
1 Plate Identificat ion ABS0970-72 Item 1
a
 Clean the installation area of the identification plate with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
b
 As shown on Fig. A-SBDAA Sheet 02
 , View C, cut the Spare Data
part from the identification plate, item 1 and install the cut part to the
appropriate place of the current identification plate.
2
 Reidentify the elevator in accordance with Process and Material Specification
(PMS) 01-06-12:
1 Elevator A ssy WW030A GABAAA
becomes:
1 Elevator A ssy WW030A QABAAA
NOTE
: PNR bar code will be overwrite and CSC code will be
hand write with permanent marker in the new part of the
identification plate.
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 43
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 50

@A350
SERVICE BULLETIN
3
 Protect the identification plate, item 1 with:
Clear Coat
Polyurethane-
Chromate Free -
External
04MDA3 As required
(12) Subtask 55P003-950- 601-002 - Reidentify the Elevator in Zone 345
Work Zones and Access Panels
Zone
 Access/Work location
345
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 NON SPECIFIC
Material necessary to do the job
Component COMPC01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 ABS0970-72
 1
 PLATE
NOTE
: This Matset contains items with a Shelf Life of less than 24 months
which must be ordered when you intend to accomplish the Service
Bulletin.
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
Reidentified part set REIDC01
ITEM
 NEW PART N˚
 KEYWORD
 ITEM
 OLD PART N˚
 SEE
NOTES
WW031APABAAA
 WW031AFABAAA
Consumable CMLC01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Clear Coat Polyurethane-
Chromate Free - External
04MDA3
 As required
Non Aqueous Cleaner-
General
08BAA9
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
References
Fig. A-SBDAA
Re-identification of the Elevator
Sheet 01
Sheet 02
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 44
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 51

@A350
SERVICE BULLETIN
(a) Reidentify the elevator in Zone 335, as shown on Fig. A-SBDAA Sheet 01
 and Fig.
A-SBDAA Sheet 02
.
1
 Install:
1 Plate Identificat ion ABS0970-72 Item 1
a
 Clean the installation area of the identification plate with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
b
 As shown on Fig. A-SBDAA Sheet 02
 , View C, cut the Spare Data
part from the identification plate, item 1 and install the cut part to the
appropriate place of the current identification plate.
2
 Reidentify the elevator:
1 Elevator A ssy WW031A FABAAA
becomes:
1 Elevator Assy WW031APABAAA
NOTE
: PNR bar code will be overwrite and CSC code will be
hand write with permanent marker in the new part of the
identification plate.
3
 Protect the identification plate, item 1 with:
Clear Coat
Polyurethane-
Chromate Free -
External
04MDA3 As required
**CONF 002
(1) Subtask 55P003-831-603-002 - Modify THS Torsion Box and apply the Corrosion
Prevention in Zone 330
Work Zones and Access Panels
Zone
 Access/Work location
330
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 45
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 52

@A350
SERVICE BULLETIN
Manpower Resources
Manhours
 3.00
Minimum number of person
 1
Subtask elapsed time
 3.00
Skills
 AIRFRAME
Material necessary to do the job
Consumable CMLC02
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Coating - Flexible Structure
 04QAB2
Polysulfide Sealant-General
Purpose Fillet
06AAB1
 As required
Non Aqueous Cleaner-
General
08BAA9
Laminating Resin-Epoxy
Srm Type 2
13EBC1
Textile-Lint Free Cotton
 14SBA1
References
Process and Material Specification
(PMS)
Process and Material Specification (PMS)
01-03-51
Fig. A-SBBAA
Modification of the THS
Sheet 01
Sheet 02
Sheet 03
NOTE
: Mask before applying protection all non metallic supports, electrical
harnesses, seals, hydraulic hoses and movable parts.
(a) Modify the lower skin of the torsion box of the THS.
Refer to Fig. A-SBBAA
.
1
 As shown Fig. A-SBBAA Sheet 02
 , View B, drill a drain hole into the lower
skin of the torsion box.
2
 As shown on Fig. A-SBBAA Sheet 03
, View C, deburr the hole and clean the
area around the hole at both side of the lower skin, with:
Non Aqueous
Cleaner-General
08BAA9 As required
Textile-Lint Free
Cotton
14SBA1 As required
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 46
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 53

@A350
SERVICE BULLETIN
3
 To prevent corrosion at the hole, apply in accordance with Process and
Material Specification (PMS) 01-03-51:
Laminating Resin-
Epoxy Srm Type 2
13EBC1 As required
.
4
 Clean the area at the edge of the inner rear spar and the lower skin, as shown
on Fig. A-SBBAA Sheet 03
Section A-A and View C, with:
Non Aqueous
Cleaner-General
08BAA9 As required
Textile-Lint Free
Cotton
14SBA1 As required
5
 To the cleaned area at the edge of the inner rear spar and the lower skin,
apply:
Polysulfide Sealant-
General Purpose
Fillet
06AAB1 As required
6
 After the drying process of the Polysulfide Sealant-General Purpose Fillet,
apply:
Coating - Flexible
Structure
04QAB2 As required
(2) Subtask 55P003-831-604-002 - Modify THS Torsion Box and apply the Corrosion
Prevention in Zone 340
Work Zones and Access Panels
Zone
 Access/Work location
340
Manpower Resources
Manhours
 3.00
Minimum number of person
 1
Subtask elapsed time
 3.00
Skills
 AIRFRAME
Material necessary to do the job
Consumable CMLC02
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Coating - Flexible Structure
 04QAB2
Polysulfide Sealant-General
Purpose Fillet
06AAB1
 As required
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 47
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 54

@A350
SERVICE BULLETIN
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Non Aqueous Cleaner-
General
08BAA9
Laminating Resin-Epoxy
Srm Type 2
13EBC1
Textile-Lint Free Cotton
 14SBA1
References
Process and Material Specification
(PMS)
Process and Material Specification (PMS)
01-03-51
Fig. A-SBBAA
Modification of the THS
Sheet 01
Sheet 02
Sheet 03
NOTE
: Mask before applying protection all non metallic supports, electrical
harnesses, seals, hydraulic hoses and movable parts.
(a) Modify the lower skin of the torsion box of the THS.
Refer to Fig. A-SBBAA
.
1
 As shown Fig. A-SBBAA Sheet 02
 , View B, drill a drain hole into the lower
skin of the torsion box.
2
 As shown on Fig. A-SBBAA Sheet 03
, View C, deburr the hole and clean the
area around the hole at both side of the lower skin, with:
Non Aqueous
Cleaner-General
08BAA9 As required
Textile-Lint Free
Cotton
14SBA1 As required
3
 To prevent corrosion at the hole, apply in accordance with Process and
Material Specification (PMS) 01-03-51:
Laminating Resin-
Epoxy Srm Type 2
13EBC1 As required
4
 Clean the area at the edge of the inner rear spar and the lower skin, as shown
on Fig. A-SBBAA Sheet 03
Section A-A and View C, with:
Non Aqueous
Cleaner-General
08BAA9 As required
Textile-Lint Free
Cotton
14SBA1 As required
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 48
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 55

@A350
SERVICE BULLETIN
5
 To the cleaned area at the edge of the inner rear spar and the lower skin,
apply:
Polysulfide Sealant-
General Purpose
Fillet
06AAB1 As required
6
 After the drying process of the Polysulfide Sealant-General Purpose Fillet,
apply:
Coating - Flexible
Structure
04QAB2 As required
**CONF 003
(1) Subtask 55P003-831-607-001 - Apply the Corrosion Prevention at the Rear Spar in
Zone 330
Work Zones and Access Panels
Zone
 Access/Work location
330
Manpower Resources
Manhours
 2.00
Minimum number of person
 2
Subtask elapsed time
 1.00
Skills
 AIRFRAME
Material necessary to do the job
Consumable CMLC01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Coating - Flexible Structure
 04QAB2
 As required
Polysulfide Sealant-General
Purpose Fillet
06AAB1
 As required
Non Aqueous Cleaner-
General
08BAA9
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
References
Fig. A-SBAAA
Application of Sealant to the THS
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Sheet 05
Sheet 06
Sheet 07
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 49
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 56

@A350
SERVICE BULLETIN
(a) Apply the material combination of Polysulfide Sealant-General Purpose Fillet and
Coating - Flexible Structure all along at the outer corner areas of the outer rear
spar to the upper skin joint, as shown on Fig. A-SBAAA Sheet 01
 , Fig. A-SBAAA
Sheet 02
,V i e wBa n dS e c t i o nA - A ,Fig. A-SBAAA Sheet 03
,V i e wDa n dS e c t i o nB -
B, Fig. A-SBAAA Sheet 04
 ,V i e wEa n dS e c t i o nC - C ,Fig. A-SBAAA Sheet 05
 ,
Section D-D.
1
 Clean the area with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 At the outer corner areas of the rear spar, the upper skin, as shown on Fig. A-
SBAAA Sheet 02
, Section A-A, apply:
Polysulfide Sealant-
General Purpose
Fillet
06AAB1 As required
3
 After the drying process of the Polysulfide Sealant-General Purpose Fillet,
apply to the dried sealant:
Coating - Flexible
Structure
04QAB2 As required
(b) Apply the material combination of Polysulfide Sealant-General Purpose Fillet and
Coating - Flexible Structure all along at the outer corner areas of the outer rear
spar to the lower skin joint, as shown on Fig. A-SBAAA Sheet 01
 , Fig. A-SBAAA
Sheet 02
,V i e wBa n dS e c t i o nA - A ,Fig. A-SBAAA Sheet 03
,V i e wDa n dS e c t i o nB -
B, Fig. A-SBAAA Sheet 04
 ,V i e wEa n dS e c t i o nC - C ,Fig. A-SBAAA Sheet 05
 ,
Section D-D.
1
 Clean the area with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 At the outer corner areas of the rear spar and the lower skin, as shown on
Fig. A-SBAAA Sheet 02
, Section A-A, apply:
Polysulfide Sealant-
General Purpose
Fillet
06AAB1 As required
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 50
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 57

@A350
SERVICE BULLETIN
3
 After the drying process of the Polysulfide Sealant-General Purpose Fillet,
apply to the dried sealant:
Coating - Flexible
Structure
04QAB2 As required
(c) Apply corrosion protection at the Bearing Ribs (BR)6, BR7, BR10, BR11, BR13,
BR15 and BR16, as shown on Fig. A-SBAAA Sheet 01
, View A and Fig. A-SBAAA
Sheet 06
,V i e wG ,V i e wH ,S e c t i o nE - Ea n dS e c t i o nF - F .
1
 Clean the edges of BRs to the rear spar, the upper skin and the lower skin,
with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 To the edges of the BRs to the upper skin and the lower skin, apply:
Polysulfide Sealant-
General Purpose
Fillet
06AAB1 As required
3
 After the drying process of the Polysulfide Sealant-General Purpose Fillet,
apply to the dried sealant:
Coating - Flexible
Structure
04QAB2 As required
(2) Subtask 55P003-831-601-001 - Apply t he Corrosion Prevention in Zone 330
Work Zones and Access Panels
Zone
 Access/Work location
330
Manpower Resources
Manhours
 7.00
Minimum number of person
 2
Subtask elapsed time
 3.50
Skills
 AIRFRAME
Material necessary to do the job
Consumable CMLC01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Coating - Flexible Structure
 04QAB2
 As required
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 51
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 58

@A350
SERVICE BULLETIN
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Polysulfide Sealant-General
Purpose Fillet
06AAB1
 As required
Non Aqueous Cleaner-
General
08BAA9
 As required
Corrosion Preventive
Compound-Heavy Duty
Long Dur
12AEB1
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
References
Fig. A-SBAAA
Application of Sealant to the THS
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Sheet 05
Sheet 06
Sheet 07
NOTE
: Mask before applying protection all non metallic supports, electrical
harnesses, seals, hydraulic hoses and movable parts.
(a) Apply the corrosion protection between RIB1 and RIB2, at the rear spar, as shown
on Fig. A-SBAAA Sheet 01
 and Fig. A-SBAAA Sheet 02
, View B and Section A-A.
1
 Clean the area with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 Between RIB1 and RIB2, at the rear spar, apply:
Corrosion
Preventive
Compound-Heavy
Duty Long Dur
12AEB1 As required
(b) Apply the corrosion protection in the area of pivot attachment fitting, rear spar,
upper skin and lower skin, as shown on Fig. A-SBAAA Sheet 01
, View C and Fig.
A-SBAAA Sheet 03
,V i e wDa n dS e c t i o nB - B .
1
 Clean the area with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 52
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 59

@A350
SERVICE BULLETIN
Textile-Lint Free
Cotton
14SBA1 As required
2
 Apply, as shown on Fig. A-SBAAA Sheet 03
,V i e wDa n dS e c t i o nB - B :
Corrosion
Preventive
Compound-Heavy
Duty Long Dur
12AEB1 As required
(c) Apply corrosion protection at RIB4, lower skin, rear spar and upper skin, as shown
on Fig. A-SBAAA Sheet 01
 , View A and Fig. A-SBAAA Sheet 04
 , View E and
Section C-C.
1
 Clean the area with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 At RIB4, lower skin, rear spar and upper skin, apply:
Corrosion
Preventive
Compound-Heavy
Duty Long Dur
12AEB1 As required
(d) Apply corrosion protection at RIB12, lower skin, rear spar and upper skin, as shown
on Fig. A-SBAAA Sheet 01
 , View A and Fig. A-SBAAA Sheet 05
 ,V i e wFa n d
Section D-D.
1
 Clean the area with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 At RIB12, lower skin, rear spar and upper skin, apply:
Corrosion
Preventive
Compound-Heavy
Duty Long Dur
12AEB1 As required
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 53
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 60

@A350
SERVICE BULLETIN
(e) Apply corrosion protection at the Bearing Ribs (BR)6, BR7, BR10, BR11, BR13,
BR15 and BR16, as shown on Fig. A-SBAAA Sheet 01
, View A and Fig. A-SBAAA
Sheet 06
, View G and View H and Section E-E and F-F.
1
 Clean the edges of BRs to the rear spar, the upper skin and the lower skin,
with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 Apply to the corners of the rear spar and BR to the upper skin and the lower
skin apply, as shown on Fig. A-SBAAA Sheet 06
, View H and Section F-F:
Corrosion
Preventive
Compound-Heavy
Duty Long Dur
12AEB1 As required
(f) Apply the corrosion protection, at the rear spar and the attachment fitting of the
TER2, as shown on Fig. A-SBAAA Sheet 01
, View A and Fig. A-SBAAA Sheet 07
,
View J.
1
 Clean the sealing area with:
Non Aqueous
Cleaner-General
08BAA9 As required
and
Textile-Lint Free
Cotton
14SBA1 As required
2
 To the nuts at the TER2 attachment fitting and the edge of the TER2
attachment fitting to the rear spar, apply:
Polysulfide Sealant-
General Purpose
Fillet
06AAB1 As required
3
 After the drying process of the Polysulfide Sealant-General Purpose Fillet,
apply to the dried sealant at the edge of the TER2 attachment fitting to the
rear spar:
Coating - Flexible
Structure
04QAB2 As required
DATE: Nov 06/17 SERVICE BULLETIN No.: A350-55-P003
REVISION No.: 00 - Nov 06/17 Page: 54
0
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

The text continues at https://openairdocs.org/service-documents/airbus/a350-55-p003/file/2dec586f9c86.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
