# Airbus Service Bulletin A350-57-P067

## Copies (3)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- No revision named ("A350-57-P067"), 327 pages: PDF https://openairdocs.org/files/sha256/23/e2/23e2fee117d6ab85187a562acf6db69e5ce5199c0cff2bebc46a70e97bc4318f; text https://openairdocs.org/service-documents/airbus/a350-57-p067/file/23e2fee117d6.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2023-1038, the docket of AD 2023-14-09. Not covered by OpenAirDocs’ CC0 dedication.
- No revision named ("A350-57-P067"), 327 pages: PDF https://openairdocs.org/files/sha256/e7/50/e75094db2495681b260fa8db44e5727254c7952f41400e4631e315c4794619f6; text https://openairdocs.org/service-documents/airbus/a350-57-p067/file/e75094db2495.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2022-0678, the docket of AD 2022-17-09. Not covered by OpenAirDocs’ CC0 dedication.
- No revision named ("A350-57-P067"), 327 pages: PDF https://openairdocs.org/files/sha256/eb/75/eb75e09a71efc5857715e225188ac1ca3b50a75065dafea74cfad82a2ab082e8; text https://openairdocs.org/service-documents/airbus/a350-57-p067/file/eb75e09a71ef.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2021-0142, the docket of AD 2021-16-03. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A350-57-P067
- Page: https://openairdocs.org/service-documents/airbus/a350-57-p067

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2025-20-05](https://openairdocs.org/ad/2025-20-05.md), effective Dec 30, 2025: No revision named
- [AD 2023-14-09](https://openairdocs.org/ad/2023-14-09.md), effective Sep 7, 2023: No revision named

Also cited in [2 proposed ADs](https://openairdocs.org/service-documents/airbus/a350-57-p067/proposed.md), [2 difficulty reports](https://openairdocs.org/service-documents/airbus/a350-57-p067/reports.md).

## Text (327 pages)

No revision named, the newest copy. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2023-1038, the docket of AD 2023-14-09. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 1
CONF ALL
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
 
The content of this document is the property of Airbus. All rights including copyrights are reserved.
It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may information
contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of the
copyright. Requests for reproduction of any data in this document and the media authorized for it must
be addressed to Airbus.
MANDATORY MANDATORY MANDATORY
ATA SYSTEM: 57
TITLE: WINGS - OUTER WING - INSPECTION OUTER WING EDGE GLOW
SEALANT
MODIFICATION No.:
None

### Page 2

A350
SERVICE BULLETIN
SUMMARY
REV 00 Sep 17/20 A350-57-P067
Page 2
ATA SYSTEM: 57
TITLE: WINGS - OUTER WING - INSPECTION OUTER WING EDGE GLOW
SEALANT
SUMMARY
This summary is for information only and is not approved for modification of the aircraft.
A. MODIFICATIONS
CONF 001
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 002
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 003
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 004
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 005
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None

### Page 3

A350
SERVICE BULLETIN
SUMMARY
REV 00 Sep 17/20 A350-57-P067
Page 3
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 006
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 007
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 008
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 009
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 010
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 011

### Page 4

A350
SERVICE BULLETIN
SUMMARY
REV 00 Sep 17/20 A350-57-P067
Page 4
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 012
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 013
MODIFICATION CLASSIFICATION
MAJOR None
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF ALL
B. REASON
(1) History
It has been identified that sealant may not have been applied at all required locations
of the A350 wing upper and lower cover. The overcoat sealant provides the second
layer of protection to prevent stringer edge glow in case of lighting strike.
(2) Objective/Action
A one-time detailed visual inspection of the sealant application is required to identify
and restore any areas of missing sealant in accordance with drawing requirements.
(3) Advantages
Correction of any missing sealant will restore the 2 independent layers of lightning
strike protection in accordance with the certification requirement.
(4) Operational/Maintenance Consequences
None
C. GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE MANDATORY COST SAVING NO
A/C OPERATION
AFFECTED
NO VENDOR SB NO

### Page 5

A350
SERVICE BULLETIN
SUMMARY
REV 00 Sep 17/20 A350-57-P067
Page 5
EVALUATION TABLE
CANCELS INSPECTION SB NO ETOPS AFFECTED NO
PAX COMFORT AFFECTED NO POTENTIAL AD YES
RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO
LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO
NOTE: Service Bulletin must be accomplished.
D. MAINTENANCE CONFIGURATION
CONF 001
MAINTENANCE CONFIGURATION
FUEL TANKS OPENED YES
CONF 002
MAINTENANCE CONFIGURATION
FUEL TANKS OPENED YES
CONF 003
MAINTENANCE CONFIGURATION
FUEL TANKS OPENED YES
CONF 004
MAINTENANCE CONFIGURATION
FUEL TANKS OPENED YES
CONF 005
MAINTENANCE CONFIGURATION
FUEL TANKS OPENED YES
CONF 006
MAINTENANCE CONFIGURATION
FUEL TANKS OPENED YES
CONF 007
MAINTENANCE CONFIGURATION
FUEL TANKS OPENED YES
CONF 008
MAINTENANCE CONFIGURATION
FUEL TANKS OPENED YES
CONF 009
MAINTENANCE CONFIGURATION
FUEL TANKS OPENED YES
CONF 010

### Page 6

A350
SERVICE BULLETIN
SUMMARY
REV 00 Sep 17/20 A350-57-P067
Page 6
MAINTENANCE CONFIGURATION
FUEL TANKS OPENED YES
CONF 011
MAINTENANCE CONFIGURATION
FUEL TANKS OPENED YES
CONF 012
MAINTENANCE CONFIGURATION
FUEL TANKS OPENED YES
CONF 013
MAINTENANCE CONFIGURATION
FUEL TANKS OPENED YES
CONF ALL
E. MATERIAL PRICE INFORMATION
CONF 001
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
No material
CONF 002
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
No material
CONF 003
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
No material
CONF 004
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
No material
CONF 005
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
No material

### Page 7

A350
SERVICE BULLETIN
SUMMARY
REV 00 Sep 17/20 A350-57-P067
Page 7
CONF 006
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
No material
CONF 007
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
No material
CONF 008
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
No material
CONF 009
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
No material
CONF 010
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
No material
CONF 011
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
No material
CONF 012
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
No material
CONF 013
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
No material

### Page 8

A350
SERVICE BULLETIN
SUMMARY
REV 00 Sep 17/20 A350-57-P067
Page 8
CONF ALL
F. APPLICABILITY
This Service Bulletin is applicable to this (these) operator(s):
82W AAR AFR CAL CCA CES CHH CPA CSC CSN DAL DLH ETH EVE FBU FIN FWI HVN IBE JAL
MAS MAU PAL QTR SAA SIA TAM THA
G. CONCURRENT REQUIREMENTS
None
H. NATURE OF THE WORK
CONF 001
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT YES
EQUIPMENT NO
CONF 002
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT YES
EQUIPMENT NO
CONF 003
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT YES
EQUIPMENT NO
CONF 004
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT YES
EQUIPMENT NO
CONF 005
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT YES
EQUIPMENT NO
CONF 006

### Page 9

A350
SERVICE BULLETIN
SUMMARY
REV 00 Sep 17/20 A350-57-P067
Page 9
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT YES
EQUIPMENT NO
CONF 007
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT YES
EQUIPMENT NO
CONF 008
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT YES
EQUIPMENT NO
CONF 009
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT YES
EQUIPMENT NO
CONF 010
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT YES
EQUIPMENT NO
CONF 011
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT YES
EQUIPMENT NO
CONF 012
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings

### Page 10

A350
SERVICE BULLETIN
SUMMARY
REV 00 Sep 17/20 A350-57-P067
Page 10
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT YES
EQUIPMENT NO
CONF 013
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT YES
EQUIPMENT NO
CONF ALL
I. MANPOWER
CONF 001
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
MANPOWER
TOTAL MAN-HOURS 67.10 h
ELAPSED TIME (HOURS) 14.00 h
CONF 002
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
MANPOWER
TOTAL MAN-HOURS 67.10 h
ELAPSED TIME (HOURS) 14.00 h
CONF 003
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
MANPOWER
TOTAL MAN-HOURS 53.10 h
ELAPSED TIME (HOURS) 11.50 h
CONF 004
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
MANPOWER
TOTAL MAN-HOURS 53.10 h

### Page 11

A350
SERVICE BULLETIN
SUMMARY
REV 00 Sep 17/20 A350-57-P067
Page 11
MANPOWER
ELAPSED TIME (HOURS) 11.50 h
CONF 005
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
MANPOWER
TOTAL MAN-HOURS 53.10 h
ELAPSED TIME (HOURS) 11.50 h
CONF 006
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
MANPOWER
TOTAL MAN-HOURS 53.10 h
ELAPSED TIME (HOURS) 11.50 h
CONF 007
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
MANPOWER
TOTAL MAN-HOURS 36.10 h
ELAPSED TIME (HOURS) 8.50 h
CONF 008
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
MANPOWER
TOTAL MAN-HOURS 36.10 h
ELAPSED TIME (HOURS) 8.50 h
CONF 009
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
MANPOWER
TOTAL MAN-HOURS 36.10 h
ELAPSED TIME (HOURS) 8.50 h
CONF 010

### Page 12

A350
SERVICE BULLETIN
SUMMARY
REV 00 Sep 17/20 A350-57-P067
Page 12
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
MANPOWER
TOTAL MAN-HOURS 36.10 h
ELAPSED TIME (HOURS) 8.50 h
CONF 011
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
MANPOWER
TOTAL MAN-HOURS 44.60 h
ELAPSED TIME (HOURS) 10.25 h
CONF 012
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
MANPOWER
TOTAL MAN-HOURS 44.60 h
ELAPSED TIME (HOURS) 10.25 h
CONF 013
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
MANPOWER
TOTAL MAN-HOURS 44.60 h
ELAPSED TIME (HOURS) 10.25 h

### Page 13

A350
SERVICE BULLETIN
SUMMARY
Figure ICN-A350-A-57XXP067-A-FAPE3-05QW2-A-001-01 SHEET 1/3
REV 00 Sep 17/20 A350-57-P067General Overview
Page 13
CONF ALL
J. GENERAL OVERVIEW
CONF 001-006
A B
A B
A
B
LH SHOWN
RH SYMMETRICAL
LH SHOWN
RH SYMMETRICAL
Z500
Z600
C
D
ICN-A350-A-57XXP067-A-FAPE3-05QW2-A-001-01

### Page 14

A350
SERVICE BULLETIN
SUMMARY
Figure ICN-A350-A-57XXP067-A-FAPE3-05R1S-A-001-01 SHEET 2/3
REV 00 Sep 17/20 A350-57-P067General Overview
Page 14
CONF 001-006
C
RIBS, UPPER STRINGERS AND WING UPPER COVER NOT SHOWN
VIEW LOOKING DOWN
F
W
D
STGR3
STGR4
STGR5
STGR6
STGR7
STGR8
STGR9
STGR10
STGR11
STGR13
STGR14
STGR16
STGR17
STGR12
STGR15
STGR18
RIB9
RIB10 RIB11
RIB12
RIB13
RIB14
RIB15
RIB1
RIB2
RIB3
RIB4 RIB5
RIB6
RIB7
RIB8
RIB2A
RIB16
RIB17
RIB18
RIB20 RIB21
RIB22
RIB23
RIB24
RIB25
RIB26
RIB27 RIB28
RIB19
STGR2
LH SHOWN
RH SYMMETRICAL
NOTE:
 STRINGER EDGES TO BE INSPECTED.
INBD
ICN-A350-A-57XXP067-A-FAPE3-05R1S-A-001-01

### Page 15

A350
SERVICE BULLETIN
SUMMARY
Figure ICN-A350-A-57XXP067-A-FAPE3-05R1T-A-001-01 SHEET 3/3
REV 00 Sep 17/20 A350-57-P067General Overview
Page 15
CONF 001-006
NOTE:
 STRINGER EDGES TO BE INSPECTED.
D
RIBS, LOWER STRINGERS AND WING LOWER COVER NOT SHOWN
VIEW LOOKING UP
LH SHOWN
RH SYMMETRICAL
F
W
D
STGR5
STGR4
STGR2
STGR6
STGR7
STGR8
STGR9
STGR10
STGR11
STGR13
STGR14
STGR16
STGR17
STGR12
STGR15
STGR18
STGR3
RIB22
RIB16
RIB2
RIB1
RIB3
RIB4
RIB5
RIB6
RIB7
RIB8
RIB9
RIB10
RIB11 RIB12
RIB13
RIB14
RIB15
RIB17
RIB18
RIB19 RIB20
RIB21
RIB23
RIB24
RIB25
RIB26
RIB27
RIB28
INBD
STGR1
ICN-A350-A-57XXP067-A-FAPE3-05R1T-A-001-01

### Page 16

A350
SERVICE BULLETIN
SUMMARY
Figure ICN-A350-A-57XXP067-A-FAPE3-05QW5-A-001-01 SHEET 1/2
REV 00 Sep 17/20 A350-57-P067General Overview
Page 16
CONF 007-013
A
A
A
LH SHOWN
RH SYMMETRICAL
Z500
Z600
B
ICN-A350-A-57XXP067-A-FAPE3-05QW5-A-001-01

### Page 17

A350
SERVICE BULLETIN
SUMMARY
Figure ICN-A350-A-57XXP067-A-FAPE3-05R1U-A-001-01 SHEET 2/2
REV 00 Sep 17/20 A350-57-P067General Overview
Page 17
CONF 007-013
NOTE:
 STRINGER EDGES TO BE INSPECTED.
RIBS, LOWER STRINGERS AND WING LOWER COVER NOT SHOWN
VIEW LOOKING UP
LH SHOWN
RH SYMMETRICAL
F
W
D
STGR5
STGR4
STGR2
STGR6
STGR7
STGR8
STGR9
STGR10
STGR11
STGR13
STGR14
STGR16
STGR17
STGR12
STGR15
STGR18
STGR3
RIB22
RIB16
RIB2
RIB1
RIB3
RIB4
RIB5
RIB6
RIB7
RIB8
RIB9
RIB10
RIB11 RIB12
RIB13
RIB14
RIB15
RIB17
RIB18
RIB19 RIB20
RIB21
RIB23
RIB24
RIB25
RIB26
RIB27
RIB28
INBD
STGR1
B
ICN-A350-A-57XXP067-A-FAPE3-05R1U-A-001-01

### Page 18

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 18
ATA SYSTEM: 57
TITLE: WINGS - OUTER WING - INSPECTION OUTER WING EDGE GLOW
SEALANT
CONF ALL
1. PLANNING INFORMATION
A. APPLICABILITY
(1) Models
ON A/C 0065, 0088, 0102, 0110, 0118, 0125
350-1041
ON A/C 0005-0058, 0060-0064, 0066-0070, 0072-0087, 0089-0101, 0103-0107, 0109, 0111-
0117, 0119-0124, 0126-0130, 0132-0138, 0140, 0142-0151, 0153-0155, 0157-0160, 0162-
0165, 0167, 0168, 0170, 0172-0187, 0189-0193, 0195-0205, 0207-0214, 0216-0221, 0223,
0224, 0226-0228, 0230-0232, 0234-0240, 0243-0251, 0254-0257, 0259-0261, 0263-0265,
0267-0269, 0271-0273, 0276-0282, 0284, 0287, 0289, 0291-0295, 0297, 0300-0303, 0305,
0307, 0309-0312, 0314, 0316, 0318, 0321, 0322, 0324, 0325, 0327-0329, 0331, 0333, 0337,
0341, 0343-0345
350-941
CONF ALL
(2) Applicability by MSN
0005-0058 0060-0070 0072-0107 0109-0130 0132-0138 0140 0142-0151 0153-0155
0157-0160 0162-0165 0167 0168 0170 0172-0187 0189-0193 0195-0205 0207-0214
0216-0221 0223 0224 0226-0228 0230-0232 0234-0240 0243-0251 0254-0257 0259-
0261 0263-0265 0267-0269 0271-0273 0276-0282 0284 0287 0289 0291-0295 0297
0300-0303 0305 0307 0309-0312 0314 0316 0318 0321 0322 0324 0325 0327-0329
0331 0333 0337 0341 0343-0345
(3) MSN by configuration
CONF 001
MSN CONFIGURATION
0005 0018 0019 0020 001
CONF 002
MSN CONFIGURATION
0006 0007 0008 0009 0010 0011 0012 0013 0014 0015 0016
0017
002
CONF 003
MSN CONFIGURATION
0021 0025 0033 0036 0042 0047 0056 0063 0067 0069 0074
0076 0078 0080 0083 0086 0087 0090 0098 0100 0106 0112
0114 0115 0126 0127 0132 0135 0143 0150
003
CONF 004
MSN CONFIGURATION
0022 0023 0028 0044 0050 0051 0082 0091 0095 0097 0104
0111 0113 0123 0124 0130 0134 0142
004

### Page 19

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 19
CONF 005
MSN CONFIGURATION
0026 0030 0031 0037 0041 0052 0054 0055 0060 0062 0068
0077 0081 0084 0096 0099 0107 0116 0122
005
CONF 006
MSN CONFIGURATION
0024 0027 0029 0032 0034 0035 0038 0039 0040 0043 0045
0046 0048 0049 0053 0057 0058 0061 0064 0066 0070 0072
0073 0075 0079 0085 0089 0092 0093 0094 0101 0103 0105
0109 0117 0119 0120 0121 0128 0137 0138 0144 0148
006
CONF 007
MSN CONFIGURATION
0129 0136 0146 0149 0160 0163 0164 0172 0173 0174 0175
0182 0184 0190 0192 0197 0199 0202 0204 0207 0209 0210
0211 0212 0214 0221 0228 0236 0237 0243 0249 0254 0255
0257 0263 0267 0276 0277 0278 0279 0280 0287 0292 0294
0297 0303 0305 0309 0314 0316 0321 0322 0328 0333 0343
007
CONF 008
MSN CONFIGURATION
0153 0168 0177 0181 0185 0187 0189 0193 0201 0219 0227
0264 0271 0273 0293 0300 0302 0312 0325 0327 0331
008
CONF 009
MSN CONFIGURATION
0133 0140 0158 0170 0186 0216 0220 0223 0230 0232 0238
0244 0281 0318 0329 0341 0344
009
CONF 010
MSN CONFIGURATION
0145 0147 0151 0154 0155 0157 0159 0162 0165 0167 0176
0178 0179 0180 0183 0191 0195 0196 0198 0200 0203 0205
0208 0213 0217 0218 0224 0226 0231 0234 0235 0239 0240
0245 0246 0247 0248 0250 0251 0256 0259 0260 0261 0265
0268 0269 0272 0282 0284 0289 0291 0295 0301 0307 0310
0311 0324 0337 0345
010
CONF 011
MSN CONFIGURATION
0088 0102 0110 0125 011
CONF 012
MSN CONFIGURATION
0065 012
CONF 013

### Page 20

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 20
MSN CONFIGURATION
0118 013
CONF ALL
(4) Configuration definition
CONF 001
Configuration 001
CONF 001 regards the specific PRE-SB status of the related aircraft.
CONF 002
Configuration 002
CONF 002 regards the specific PRE-SB status of the related aircraft.
CONF 003
Configuration 003
CONF 003 regards the specific PRE-SB status of the related aircraft.
CONF 004
Configuration 004
CONF 004 regards the specific PRE-SB status of the related aircraft.
CONF 005
Configuration 005
CONF 005 regards the specific PRE-SB status of the related aircraft.
CONF 006
Configuration 006
CONF 006 regards the specific PRE-SB status of the related aircraft.
CONF 007
Configuration 007
CONF 007 regards the specific PRE-SB status of the related aircraft.
CONF 008
Configuration 008
CONF 008 regards the specific PRE-SB status of the related aircraft.
CONF 009
Configuration 009
CONF 009 regards the specific PRE-SB status of the related aircraft.
CONF 010
Configuration 010
CONF 010 regards the specific PRE-SB status of the related aircraft.
CONF 011
Configuration 011
CONF 011 regards the specific PRE-SB status of the related aircraft.
CONF 012
Configuration 012
CONF 012 regards the specific PRE-SB status of the related aircraft.
CONF 013

### Page 21

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 21
Configuration 013
CONF 013 regards the specific PRE-SB status of the related aircraft.
CONF ALL
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
It has been identified that sealant may not have been applied at all required locations
of the A350 wing upper and lower cover. The overcoat sealant provides the second
layer of protection to prevent stringer edge glow in case of lighting strike.
(2) Objective/Action
A one-time detailed visual inspection of the sealant application is required to identify
and restore any areas of missing sealant in accordance with drawing requirements.
(3) Advantages
Correction of any missing sealant will restore the 2 independent layers of lightning
strike protection in accordance with the certification requirement.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
T o accomplish this Service Bulletin it is necessary to:
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
CONF 001 002
1 Do a Detailed Inspection of the Stringer Edges and the Voids under Rib Feet
in the LH Wing
CONF 003-006
1 Do a Detailed Inspection of the Stringer Edges in the LH Wing
CONF 007-010
1 Do a Detailed Inspection of the Stringer Edges in the LH Wing
CONF 011-013
1 Do a Detailed Inspection of the Stringer Edges in the LH Wing
CONF 001 002
2 Do a Detailed Inspection of the Stringer Edges and the Voids under Rib Feet
in the RH Wing
CONF 003-006
2 Do a Detailed Inspection of the Stringer Edges in the RH Wing
CONF 007-010
2 Do a Detailed Inspection of the Stringer Edges in the RH Wing
CONF 011-013
2 Do a Detailed Inspection of the Stringer Edges in the RH Wing
CONF 001

### Page 22

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 22
3 Depending of the Inspection Result, Apply Sealant in the Stringer Edges
and/or the Voids under Rib Feet in the LH Wing
CONF 003
3 Depending of the Inspection Result, Apply Sealant in the Stringer Edges in
the LH Wing
CONF 007
3 Depending of the Inspection Result, Apply Sealant in the Stringer Edges in
the LH Wing
CONF 011
3 Depending of the Inspection Result, Apply Sealant in the Stringer Edges in
the LH Wing
CONF 002
3 Depending of the Inspection Result, Apply Sealant in the Stringer Edges in
the LH Wing
CONF 004
3 Depending of the Inspection Result, Apply Sealant in the Stringer Edges in
the LH Wing
CONF 005
3 Depending of the Inspection Result, Apply Sealant in the Stringer Edges in
the LH Wing
CONF 006
3 Depending of the Inspection Result, Apply Sealant in the Stringer Edges in
the LH Wing
CONF 008
3 Depending of the Inspection Result, Apply Sealant in the Stringer Edges in
the LH Wing
CONF 009
3 Depending of the Inspection Result, Apply Sealant in the Stringer Edges in
the LH Wing
CONF 010
3 Depending of the Inspection Result, Apply Sealant in the Stringer Edges in
the LH Wing
CONF 012
3 Depending of the Inspection Result, Apply Sealant in the Stringer Edges in
the LH Wing
CONF 013
3 Depending of the Inspection Result, Apply Sealant in the Stringer Edges in
the LH Wing
CONF 001 002
4 Depending of the Inspection Result, Apply Sealant in the Stringer Edges
and/or the Voids under Rib Feet in the RH Wing
CONF 003 004
4 Depending of the Inspection Result, Apply Sealant in the Stringer Edges in
the RH Wing
CONF 007 008
4 Depending of the Inspection Result, Apply Sealant in the Stringer Edges in
the RH Wing
CONF 011 012

### Page 23

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 23
4 Depending of the Inspection Result, Apply Sealant in the Stringer Edges in
the RH Wing
CONF 005 006
4 Depending of the Inspection Result, Apply Sealant in the Stringer Edges in
the RH Wing
CONF 009 010
4 Depending of the Inspection Result, Apply Sealant in the Stringer Edges in
the RH Wing
CONF 013
4 Depending of the Inspection Result, Apply Sealant in the Stringer Edges in
the RH Wing
CONF ALL
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
Accomplishment of this Service Bulletin must be done within the threshold given in the
table below.
This Service Bulletin has been classified Mandatory. It is expected that an
Airworthiness Directive (AD) published by the European Union Aviation Safety Agency
(EASA) will be issued to confirm this classification. It is anticipated that the AD will
confirm the thresholds given but reference should be made to the AD for confirmation
of the mandated accomplishment timescale.
T able 01, CONF 001 and 002 – Detailed inspection of the stringer edges and voids
under rib feet in the Left Hand (LH) wing.
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL
All aircraft Do a detailed
inspection of
the stringer
edges and voids
under rib feet in
the LH wing in
accordance with
Ref. T ask A350-
A-57-XX-P067-
02ZZZ-300Z-A
At the next
scheduled
maintenance
tank entry
or no later
than 6 years
maintenance
check, whichever
occurs first
None None
If all the stringer
edges and voids
under rib feet
inspected are in
accordance with
the requirements
given
No further action None None None
If any stringer
edge or void
under rib feet
shows any defect
Apply sealant
in the stringer
edges and/
or voids under
Before next flight None None

### Page 24

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 24
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL
in the sealant
application out of
the requirements
given
rib feet in the
LH wing in
accordance
with Ref. T ask
A350-A-57-XX-
P067-01ZZZ-
600Z-A And
  No further action None None None
T able 02, CONF 001 and 002 – Detailed inspection of the stringer edges and voids
under rib feet in the Right Hand (RH) wing.
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL
All aircraft Do a detailed
inspection of
the stringer
edges and voids
under rib feet in
the RH wing in
accordance with
Ref. T ask A350-
A-57-XX-P067-
03ZZZ-300Z-A
At the next
scheduled
maintenance
tank entry
or no later
than 6 years
maintenance
check, whichever
occurs first
None None
If all the stringer
edges and voids
under rib feet
inspected are in
accordance with
the requirements
given
No further action None None None
If any stringer
edge or void
under rib feet
shows any defect
in the sealant
application out of
the requirements
given
Apply sealant
in the stringer
edges and/
or voids under
rib feet in the
RH wing in
accordance
with Ref. T ask
A350-A-57-XX-
P067-02ZZZ-
600Z-A And
Before next flight None None
  No further action None None None
T able 03, CONF 003 thru 013 – Detailed inspection of the stringer edges in the LH
wing.
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL
All aircraft Do a detailed
inspection of the
At the next
scheduled
None None

### Page 25

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 25
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL
stringer edges
in the LH wing in
accordance with
Ref. T ask A350-
A-57-XX-P067-
02ZZZ-300Z-A
maintenance
tank entry
or no later
than 6 years
maintenance
check, whichever
occurs first
If all the
stringer edges
inspected are in
accordance with
the requirements
given
No further action None None None
If any stringer
edge shows
any defect in
the sealant
application out of
the requirements
given
Apply sealant
in the stringer
edges in the
LH wing in
accordance
with Ref. T ask
A350-A-57-XX-
P067-01ZZZ-
600Z-A And
Before next flight None None
  No further action None None None
T able 04, CONF 003 thru 013 – Detailed inspection of the stringer edges in the RH
wing.
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL
All aircraft Do a detailed
inspection of the
stringer edges in
the RH wing in
accordance with
Ref. T ask A350-
A-57-XX-P067-
03ZZZ-300Z-A
At the next
scheduled
maintenance
tank entry
or no later
than 6 years
maintenance
check, whichever
occurs first
None None
If all the
stringer edges
inspected are in
accordance with
the requirements
given
No further action None None None
If any stringer
edge shows
any defect in
the sealant
application out of
the requirements
given
Apply sealant
in the stringer
edges in the
RH wing in
accordance
with Ref. T ask
A350-A-57-XX-
Before next flight None None

### Page 26

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 26
COMPLIANCE TIME
CONDITIONS ACTION
THRESHOLD GRACE PERIOD
REPETITIVE
INTERVAL
P067-02ZZZ-
600Z-A And
  No further action None None None
F. APPROVAL
The technical content of this document is approved under the authority of the Design
Organisation Approval ref. EASA.21J.031.
If an aircraft listed in the applicability has a modification or repair embodied that is not
of AIRBUS origin, and which affects the content of this Service Bulletin, the operator
is responsible for obtaining approval by its airworthiness authority for any adaptation
necessary before incorporation of the Service Bulletin.
G. MANPOWER
CONF 001
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
PREPARATION
General Job Set-up 0.25 h
Job Set-up on the LH Wing 9.00 h
Job Set-up on the RH Wing 9.00 h
PROCEDURE
Do a Detailed Inspection of the Stringer Edges and the
Voids under Rib Feet in the LH Wing
18.00 h
Do a Detailed Inspection of the Stringer Edges and the
Voids under Rib Feet in the RH Wing
18.00 h
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges and/or the Voids under Rib Feet in the LH
Wing
0.25 h
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges and/or the Voids under Rib Feet in the RH
Wing
0.25 h
PREPARATION FOR TEST
None
TEST
T est 0.10 h
CLOSE-UP
Close-up on the LH Wing 6.00 h
Close-up on the RH Wing 6.00 h

### Page 27

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 27
General Close-up 0.25 h
TOTAL MAN-HOURS 67.10 h
ELAPSED TIME (HOURS) 14.00 h
NOTE: For an explanation of the man-hours and elapsed time, refer to the
Gantt Chart given in Appendix MANPOWER GANTT CHART.
NOTE: The minimum man-hours necessary to accomplish this Service Bulletin
are those for the Inspection. Depending on the inspection result,
additional man-hours can apply.
CONF 002
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
PREPARATION
General Job Set-up 0.25 h
Job Set-up on the LH Wing 9.00 h
Job Set-up on the RH Wing 9.00 h
PROCEDURE
Do a Detailed Inspection of the Stringer Edges and the
Voids under Rib Feet in the LH Wing
18.00 h
Do a Detailed Inspection of the Stringer Edges and the
Voids under Rib Feet in the RH Wing
18.00 h
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges in the LH Wing
0.25 h
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges and/or the Voids under Rib Feet in the RH
Wing
0.25 h
PREPARATION FOR TEST
None
TEST
T est 0.10 h
CLOSE-UP
Close-up on the LH Wing 6.00 h
Close-up on the RH Wing 6.00 h
General Close-up 0.25 h
TOTAL MAN-HOURS 67.10 h
ELAPSED TIME (HOURS) 14.00 h
NOTE: For an explanation of the man-hours and elapsed time, refer to the
Gantt Chart given in Appendix MANPOWER GANTT CHART.

### Page 28

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 28
NOTE: The minimum man-hours necessary to accomplish this Service Bulletin
are those for the Inspection. Depending on the inspection result,
additional man-hours can apply.
CONF 003
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
PREPARATION
General Job Set-up 0.25 h
Job Set-up on the LH Wing 8.50 h
Job Set-up on the RH Wing 8.50 h
PROCEDURE
Do a Detailed Inspection of the Stringer Edges in the LH
Wing
12.00 h
Do a Detailed Inspection of the Stringer Edges in the RH
Wing
12.00 h
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges in the LH Wing
0.25 h
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges in the RH Wing
0.25 h
PREPARATION FOR TEST
None
TEST
T est 0.10 h
CLOSE-UP
Close-up on the LH Wing 5.50 h
Close-up on the RH Wing 5.50 h
General Close-up 0.25 h
TOTAL MAN-HOURS 53.10 h
ELAPSED TIME (HOURS) 11.50 h
NOTE: For an explanation of the man-hours and elapsed time, refer to the
Gantt Chart given in Appendix MANPOWER GANTT CHART.
NOTE: The minimum man-hours necessary to accomplish this Service Bulletin
are those for the Inspection. Depending on the inspection result,
additional man-hours can apply.
CONF 004
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not

### Page 29

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 29
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
PREPARATION
General Job Set-up 0.25 h
Job Set-up on the LH Wing 8.50 h
Job Set-up on the RH Wing 8.50 h
PROCEDURE
Do a Detailed Inspection of the Stringer Edges in the LH
Wing
12.00 h
Do a Detailed Inspection of the Stringer Edges in the RH
Wing
12.00 h
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges in the LH Wing
0.25 h
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges in the RH Wing
0.25 h
PREPARATION FOR TEST
None
TEST
T est 0.10 h
CLOSE-UP
Close-up on the LH Wing 5.50 h
Close-up on the RH Wing 5.50 h
General Close-up 0.25 h
TOTAL MAN-HOURS 53.10 h
ELAPSED TIME (HOURS) 11.50 h
NOTE: For an explanation of the man-hours and elapsed time, refer to the
Gantt Chart given in Appendix MANPOWER GANTT CHART.
NOTE: The minimum man-hours necessary to accomplish this Service Bulletin
are those for the Inspection. Depending on the inspection result,
additional man-hours can apply.
CONF 005
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings

### Page 30

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 30
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
PREPARATION
General Job Set-up 0.25 h
Job Set-up on the LH Wing 8.50 h
Job Set-up on the RH Wing 8.50 h
PROCEDURE
Do a Detailed Inspection of the Stringer Edges in the LH
Wing
12.00 h
Do a Detailed Inspection of the Stringer Edges in the RH
Wing
12.00 h
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges in the LH Wing
0.25 h
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges in the RH Wing
0.25 h
PREPARATION FOR TEST
None
TEST
T est 0.10 h
CLOSE-UP
Close-up on the LH Wing 5.50 h
Close-up on the RH Wing 5.50 h
General Close-up 0.25 h
TOTAL MAN-HOURS 53.10 h
ELAPSED TIME (HOURS) 11.50 h
NOTE: For an explanation of the man-hours and elapsed time, refer to the
Gantt Chart given in Appendix MANPOWER GANTT CHART.
NOTE: The minimum man-hours necessary to accomplish this Service Bulletin
are those for the Inspection. Depending on the inspection result,
additional man-hours can apply.
CONF 006
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
PREPARATION
General Job Set-up 0.25 h
Job Set-up on the LH Wing 8.50 h
Job Set-up on the RH Wing 8.50 h

### Page 31

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 31
PROCEDURE
Do a Detailed Inspection of the Stringer Edges in the LH
Wing
12.00 h
Do a Detailed Inspection of the Stringer Edges in the RH
Wing
12.00 h
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges in the LH Wing
0.25 h
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges in the RH Wing
0.25 h
PREPARATION FOR TEST
None
TEST
T est 0.10 h
CLOSE-UP
Close-up on the LH Wing 5.50 h
Close-up on the RH Wing 5.50 h
General Close-up 0.25 h
TOTAL MAN-HOURS 53.10 h
ELAPSED TIME (HOURS) 11.50 h
NOTE: For an explanation of the man-hours and elapsed time, refer to the
Gantt Chart given in Appendix MANPOWER GANTT CHART.
NOTE: The minimum man-hours necessary to accomplish this Service Bulletin
are those for the Inspection. Depending on the inspection result,
additional man-hours can apply.
CONF 007
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
PREPARATION
General Job Set-up 0.25 h
Job Set-up on the LH Wing 8.00 h
Job Set-up on the RH Wing 8.00 h
PROCEDURE
Do a Detailed Inspection of the Stringer Edges in the LH
Wing
4.50 h
Do a Detailed Inspection of the Stringer Edges in the RH
Wing
4.50 h
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges in the LH Wing
0.25 h

### Page 32

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 32
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges in the RH Wing
0.25 h
PREPARATION FOR TEST
None
TEST
T est 0.10 h
CLOSE-UP
Close-up on the LH Wing 5.00 h
Close-up on the RH Wing 5.00 h
General Close-up 0.25 h
TOTAL MAN-HOURS 36.10 h
ELAPSED TIME (HOURS) 8.50 h
NOTE: For an explanation of the man-hours and elapsed time, refer to the
Gantt Chart given in Appendix MANPOWER GANTT CHART.
NOTE: The minimum man-hours necessary to accomplish this Service Bulletin
are those for the Inspection. Depending on the inspection result,
additional man-hours can apply.
CONF 008
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
PREPARATION
General Job Set-up 0.25 h
Job Set-up on the LH Wing 8.00 h
Job Set-up on the RH Wing 8.00 h
PROCEDURE
Do a Detailed Inspection of the Stringer Edges in the LH
Wing
4.50 h
Do a Detailed Inspection of the Stringer Edges in the RH
Wing
4.50 h
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges in the LH Wing
0.25 h
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges in the RH Wing
0.25 h
PREPARATION FOR TEST
None
TEST
T est 0.10 h

### Page 33

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 33
CLOSE-UP
Close-up on the LH Wing 5.00 h
Close-up on the RH Wing 5.00 h
General Close-up 0.25 h
TOTAL MAN-HOURS 36.10 h
ELAPSED TIME (HOURS) 8.50 h
NOTE: For an explanation of the man-hours and elapsed time, refer to the
Gantt Chart given in Appendix MANPOWER GANTT CHART.
NOTE: The minimum man-hours necessary to accomplish this Service Bulletin
are those for the Inspection. Depending on the inspection result,
additional man-hours can apply.
CONF 009
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
PREPARATION
General Job Set-up 0.25 h
Job Set-up on the LH Wing 8.00 h
Job Set-up on the RH Wing 8.00 h
PROCEDURE
Do a Detailed Inspection of the Stringer Edges in the LH
Wing
4.50 h
Do a Detailed Inspection of the Stringer Edges in the RH
Wing
4.50 h
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges in the LH Wing
0.25 h
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges in the RH Wing
0.25 h
PREPARATION FOR TEST
None
TEST
T est 0.10 h
CLOSE-UP
Close-up on the LH Wing 5.00 h
Close-up on the RH Wing 5.00 h
General Close-up 0.25 h
TOTAL MAN-HOURS 36.10 h
ELAPSED TIME (HOURS) 8.50 h

### Page 34

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 34
NOTE: For an explanation of the man-hours and elapsed time, refer to the
Gantt Chart given in Appendix MANPOWER GANTT CHART.
NOTE: The minimum man-hours necessary to accomplish this Service Bulletin
are those for the Inspection. Depending on the inspection result,
additional man-hours can apply.
CONF 010
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
PREPARATION
General Job Set-up 0.25 h
Job Set-up on the LH Wing 8.00 h
Job Set-up on the RH Wing 8.00 h
PROCEDURE
Do a Detailed Inspection of the Stringer Edges in the LH
Wing
4.50 h
Do a Detailed Inspection of the Stringer Edges in the RH
Wing
4.50 h
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges in the LH Wing
0.25 h
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges in the RH Wing
0.25 h
PREPARATION FOR TEST
None
TEST
T est 0.10 h
CLOSE-UP
Close-up on the LH Wing 5.00 h
Close-up on the RH Wing 5.00 h
General Close-up 0.25 h
TOTAL MAN-HOURS 36.10 h
ELAPSED TIME (HOURS) 8.50 h
NOTE: For an explanation of the man-hours and elapsed time, refer to the
Gantt Chart given in Appendix MANPOWER GANTT CHART.
NOTE: The minimum man-hours necessary to accomplish this Service Bulletin
are those for the Inspection. Depending on the inspection result,
additional man-hours can apply.
CONF 011

### Page 35

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 35
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
PREPARATION
General Job Set-up 0.25 h
Job Set-up on the LH Wing 9.00 h
Job Set-up on the RH Wing 9.00 h
PROCEDURE
Do a Detailed Inspection of the Stringer Edges in the LH
Wing
6.75 h
Do a Detailed Inspection of the Stringer Edges in the RH
Wing
6.75 h
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges in the LH Wing
0.25 h
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges in the RH Wing
0.25 h
PREPARATION FOR TEST
None
TEST
T est 0.10 h
CLOSE-UP
Close-up on the LH Wing 6.00 h
Close-up on the RH Wing 6.00 h
General Close-up 0.25 h
TOTAL MAN-HOURS 44.60 h
ELAPSED TIME (HOURS) 10.25 h
NOTE: For an explanation of the man-hours and elapsed time, refer to the
Gantt Chart given in Appendix MANPOWER GANTT CHART.
NOTE: The minimum man-hours necessary to accomplish this Service Bulletin
are those for the Inspection. Depending on the inspection result,
additional man-hours can apply.
CONF 012
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings

### Page 36

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 36
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
PREPARATION
General Job Set-up 0.25 h
Job Set-up on the LH Wing 9.00 h
Job Set-up on the RH Wing 9.00 h
PROCEDURE
Do a Detailed Inspection of the Stringer Edges in the LH
Wing
6.75 h
Do a Detailed Inspection of the Stringer Edges in the RH
Wing
6.75 h
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges in the LH Wing
0.25 h
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges in the RH Wing
0.25 h
PREPARATION FOR TEST
None
TEST
T est 0.10 h
CLOSE-UP
Close-up on the LH Wing 6.00 h
Close-up on the RH Wing 6.00 h
General Close-up 0.25 h
TOTAL MAN-HOURS 44.60 h
ELAPSED TIME (HOURS) 10.25 h
NOTE: For an explanation of the man-hours and elapsed time, refer to the
Gantt Chart given in Appendix MANPOWER GANTT CHART.
NOTE: The minimum man-hours necessary to accomplish this Service Bulletin
are those for the Inspection. Depending on the inspection result,
additional man-hours can apply.
CONF 013
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
PREPARATION
General Job Set-up 0.25 h
Job Set-up on the LH Wing 9.00 h
Job Set-up on the RH Wing 9.00 h

### Page 37

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 37
PROCEDURE
Do a Detailed Inspection of the Stringer Edges in the LH
Wing
6.75 h
Do a Detailed Inspection of the Stringer Edges in the RH
Wing
6.75 h
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges in the LH Wing
0.25 h
Depending of the Inspection Result, Apply Sealant in the
Stringer Edges in the RH Wing
0.25 h
PREPARATION FOR TEST
None
TEST
T est 0.10 h
CLOSE-UP
Close-up on the LH Wing 6.00 h
Close-up on the RH Wing 6.00 h
General Close-up 0.25 h
TOTAL MAN-HOURS 44.60 h
ELAPSED TIME (HOURS) 10.25 h
NOTE: For an explanation of the man-hours and elapsed time, refer to the
Gantt Chart given in Appendix MANPOWER GANTT CHART.
NOTE: The minimum man-hours necessary to accomplish this Service Bulletin
are those for the Inspection. Depending on the inspection result,
additional man-hours can apply.
CONF ALL
H. WEIGHT AND BALANCE
Not changed
I. ELECTRICAL LOAD DATA
Not changed
J. REFERENCES
CONF 001
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-24-XX-01ZZZ-667Z-A A350-A-51-76-12-00ZZZ-660Z-A
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D

### Page 38

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 38
MAINTENANCE PROCEDURE (MP)
A350-A-24-41-XX-00ZZZ-170Z-A A350-A-28-12-62-04ZZZ-520Z-A
A350-A-28-12-62-04ZZZ-720Z-A
A350-A-28-12-62-05ZZZ-520Z-A
A350-A-28-12-62-05ZZZ-720Z-A
A350-A-28-12-62-06ZZZ-520Z-A
A350-A-28-12-62-06ZZZ-720Z-A
A350-A-28-12-62-0BZZZ-520Z-A
A350-A-28-12-62-0BZZZ-720Z-A
A350-A-28-12-63-00ZZZ-520Z-A
A350-A-28-12-63-00ZZZ-720Z-A
A350-A-28-12-63-02ZZZ-520Z-A
A350-A-28-12-63-02ZZZ-720Z-A
A350-A-28-12-63-03ZZZ-520Z-A
A350-A-28-12-63-03ZZZ-720Z-A
A350-A-28-12-63-06ZZZ-520Z-A
A350-A-28-12-63-06ZZZ-720Z-A
A350-A-28-12-63-07ZZZ-520Z-A
A350-A-28-12-63-07ZZZ-720Z-A
A350-A-28-12-63-08ZZZ-520Z-A
A350-A-28-12-63-08ZZZ-720Z-A
A350-A-28-21-62-08ZZZ-720Z-A
A350-A-28-21-62-0AZZZ-520Z-A
A350-A-28-25-61-03ZZZ-520Z-A
A350-A-28-25-61-03ZZZ-720Z-A
A350-A-28-25-61-05ZZZ-520Z-A
A350-A-28-25-61-05ZZZ-720Z-A
A350-A-47-20-62-00ZZZ-520Z-A
A350-A-47-20-62-00ZZZ-720Z-A
A350-A-57-27-71-00ZZZ-520Z-A
A350-A-57-27-71-00ZZZ-720Z-A
A350-A-57-27-71-01ZZZ-520Z-A
A350-A-57-27-71-01ZZZ-720Z-A
SYSTEM DESCRIPTION (SD)
A350-A-06-3X-XX-01ZZZ-04CZ-A A350-A-06-4X-XX-01ZZZ-04CZ-A
A350-A-57-2X-XX-01ZZZ-04CZ-A
CONSUMABLE MATERIAL LIST (CML)
CONF 002
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings

### Page 39

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 39
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-24-XX-01ZZZ-667Z-A A350-A-51-76-12-00ZZZ-660Z-A
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP)
A350-A-24-41-XX-00ZZZ-170Z-A A350-A-28-12-62-04ZZZ-520Z-A
A350-A-28-12-62-04ZZZ-720Z-A
A350-A-28-12-62-05ZZZ-520Z-A
A350-A-28-12-62-05ZZZ-720Z-A
A350-A-28-12-62-06ZZZ-520Z-A
A350-A-28-12-62-06ZZZ-720Z-A
A350-A-28-12-62-0BZZZ-520Z-A
A350-A-28-12-62-0BZZZ-720Z-A
A350-A-28-12-63-00ZZZ-520Z-A
A350-A-28-12-63-00ZZZ-720Z-A
A350-A-28-12-63-02ZZZ-520Z-A
A350-A-28-12-63-02ZZZ-720Z-A
A350-A-28-12-63-03ZZZ-520Z-A
A350-A-28-12-63-03ZZZ-720Z-A
A350-A-28-12-63-06ZZZ-520Z-A
A350-A-28-12-63-06ZZZ-720Z-A
A350-A-28-12-63-07ZZZ-520Z-A
A350-A-28-12-63-07ZZZ-720Z-A
A350-A-28-12-63-08ZZZ-520Z-A
A350-A-28-12-63-08ZZZ-720Z-A
A350-A-28-21-62-08ZZZ-720Z-A
A350-A-28-21-62-0AZZZ-520Z-A
A350-A-28-25-61-03ZZZ-520Z-A
A350-A-28-25-61-03ZZZ-720Z-A
A350-A-28-25-61-05ZZZ-520Z-A
A350-A-28-25-61-05ZZZ-720Z-A
A350-A-47-20-62-00ZZZ-520Z-A
A350-A-47-20-62-00ZZZ-720Z-A
A350-A-57-27-71-00ZZZ-520Z-A
A350-A-57-27-71-00ZZZ-720Z-A
A350-A-57-27-71-01ZZZ-520Z-A
A350-A-57-27-71-01ZZZ-720Z-A

### Page 40

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 40
SYSTEM DESCRIPTION (SD)
A350-A-06-3X-XX-01ZZZ-04CZ-A A350-A-06-4X-XX-01ZZZ-04CZ-A
A350-A-57-2X-XX-01ZZZ-04CZ-A
CONSUMABLE MATERIAL LIST (CML)
CONF 003
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-24-XX-01ZZZ-667Z-A A350-A-51-76-12-00ZZZ-660Z-A
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP)
A350-A-24-41-XX-00ZZZ-170Z-A A350-A-28-12-62-04ZZZ-520Z-A
A350-A-28-12-62-04ZZZ-720Z-A
A350-A-28-12-62-05ZZZ-520Z-A
A350-A-28-12-62-05ZZZ-720Z-A
A350-A-28-12-62-06ZZZ-520Z-A
A350-A-28-12-62-06ZZZ-720Z-A
A350-A-28-12-62-0BZZZ-520Z-A
A350-A-28-12-62-0BZZZ-720Z-A
A350-A-28-12-63-07ZZZ-520Z-A
A350-A-28-12-63-07ZZZ-720Z-A
A350-A-28-21-62-08ZZZ-720Z-A
A350-A-28-21-62-0AZZZ-520Z-A
A350-A-28-25-61-03ZZZ-520Z-A
A350-A-28-25-61-03ZZZ-720Z-A
A350-A-28-25-61-05ZZZ-520Z-A
A350-A-28-25-61-05ZZZ-720Z-A
A350-A-47-20-62-00ZZZ-520Z-A
A350-A-47-20-62-00ZZZ-720Z-A
A350-A-57-27-71-00ZZZ-520Z-A
A350-A-57-27-71-00ZZZ-720Z-A
A350-A-57-27-71-01ZZZ-520Z-A
A350-A-57-27-71-01ZZZ-720Z-A
SYSTEM DESCRIPTION (SD)
A350-A-06-3X-XX-01ZZZ-04CZ-A A350-A-06-4X-XX-01ZZZ-04CZ-A
A350-A-57-2X-XX-01ZZZ-04CZ-A
CONSUMABLE MATERIAL LIST (CML)

### Page 41

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 41
CONF 004
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-24-XX-01ZZZ-667Z-A A350-A-51-76-12-00ZZZ-660Z-A
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP)
A350-A-24-41-XX-00ZZZ-170Z-A A350-A-28-12-62-04ZZZ-520Z-A
A350-A-28-12-62-04ZZZ-720Z-A
A350-A-28-12-62-05ZZZ-520Z-A
A350-A-28-12-62-05ZZZ-720Z-A
A350-A-28-12-62-06ZZZ-520Z-A
A350-A-28-12-62-06ZZZ-720Z-A
A350-A-28-12-62-0BZZZ-520Z-A
A350-A-28-12-62-0BZZZ-720Z-A
A350-A-28-12-63-07ZZZ-520Z-A
A350-A-28-12-63-07ZZZ-720Z-A
A350-A-28-21-62-08ZZZ-720Z-A
A350-A-28-21-62-0AZZZ-520Z-A
A350-A-28-25-61-03ZZZ-520Z-A
A350-A-28-25-61-03ZZZ-720Z-A
A350-A-28-25-61-05ZZZ-520Z-A
A350-A-28-25-61-05ZZZ-720Z-A
A350-A-47-20-62-00ZZZ-520Z-A
A350-A-47-20-62-00ZZZ-720Z-A
A350-A-57-27-71-00ZZZ-520Z-A
A350-A-57-27-71-00ZZZ-720Z-A
A350-A-57-27-71-01ZZZ-520Z-A
A350-A-57-27-71-01ZZZ-720Z-A
SYSTEM DESCRIPTION (SD)
A350-A-06-3X-XX-01ZZZ-04CZ-A A350-A-06-4X-XX-01ZZZ-04CZ-A
A350-A-57-2X-XX-01ZZZ-04CZ-A
CONSUMABLE MATERIAL LIST (CML)
CONF 005
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings

### Page 42

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 42
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-24-XX-01ZZZ-667Z-A A350-A-51-76-12-00ZZZ-660Z-A
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP)
A350-A-24-41-XX-00ZZZ-170Z-A A350-A-28-12-62-04ZZZ-520Z-A
A350-A-28-12-62-04ZZZ-720Z-A
A350-A-28-12-62-05ZZZ-520Z-A
A350-A-28-12-62-05ZZZ-720Z-A
A350-A-28-12-62-06ZZZ-520Z-A
A350-A-28-12-62-06ZZZ-720Z-A
A350-A-28-12-62-0BZZZ-520Z-A
A350-A-28-12-62-0BZZZ-720Z-A
A350-A-28-12-63-07ZZZ-520Z-A
A350-A-28-12-63-07ZZZ-720Z-A
A350-A-28-21-62-08ZZZ-720Z-A
A350-A-28-21-62-0AZZZ-520Z-A
A350-A-28-25-61-03ZZZ-520Z-A
A350-A-28-25-61-03ZZZ-720Z-A
A350-A-28-25-61-05ZZZ-520Z-A
A350-A-28-25-61-05ZZZ-720Z-A
A350-A-28-31-61-01ZZZ-520Z-A
A350-A-28-31-61-01ZZZ-720Z-A
A350-A-28-31-61-02ZZZ-520Z-A
A350-A-28-31-61-02ZZZ-720Z-A
A350-A-47-20-62-00ZZZ-520Z-A
A350-A-47-20-62-00ZZZ-720Z-A
A350-A-57-27-71-00ZZZ-520Z-A
A350-A-57-27-71-00ZZZ-720Z-A
A350-A-57-27-71-01ZZZ-520Z-A
A350-A-57-27-71-01ZZZ-720Z-A
SYSTEM DESCRIPTION (SD)
A350-A-06-3X-XX-01ZZZ-04CZ-A A350-A-06-4X-XX-01ZZZ-04CZ-A
A350-A-57-2X-XX-01ZZZ-04CZ-A
CONSUMABLE MATERIAL LIST (CML)
CONF 006
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-24-XX-01ZZZ-667Z-A A350-A-51-76-12-00ZZZ-660Z-A

### Page 43

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 43
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP)
A350-A-24-41-XX-00ZZZ-170Z-A A350-A-28-12-62-04ZZZ-520Z-A
A350-A-28-12-62-04ZZZ-720Z-A
A350-A-28-12-62-05ZZZ-520Z-A
A350-A-28-12-62-05ZZZ-720Z-A
A350-A-28-12-62-06ZZZ-520Z-A
A350-A-28-12-62-06ZZZ-720Z-A
A350-A-28-12-62-0BZZZ-520Z-A
A350-A-28-12-62-0BZZZ-720Z-A
A350-A-28-12-63-07ZZZ-520Z-A
A350-A-28-12-63-07ZZZ-720Z-A
A350-A-28-21-62-08ZZZ-720Z-A
A350-A-28-21-62-0AZZZ-520Z-A
A350-A-28-25-61-03ZZZ-520Z-A
A350-A-28-25-61-03ZZZ-720Z-A
A350-A-28-25-61-05ZZZ-520Z-A
A350-A-28-25-61-05ZZZ-720Z-A
A350-A-28-31-61-01ZZZ-520Z-A
A350-A-28-31-61-01ZZZ-720Z-A
A350-A-28-31-61-02ZZZ-520Z-A
A350-A-28-31-61-02ZZZ-720Z-A
A350-A-47-20-62-00ZZZ-520Z-A
A350-A-47-20-62-00ZZZ-720Z-A
A350-A-57-27-71-00ZZZ-520Z-A
A350-A-57-27-71-00ZZZ-720Z-A
A350-A-57-27-71-01ZZZ-520Z-A
A350-A-57-27-71-01ZZZ-720Z-A
SYSTEM DESCRIPTION (SD)
A350-A-06-3X-XX-01ZZZ-04CZ-A A350-A-06-4X-XX-01ZZZ-04CZ-A
A350-A-57-2X-XX-01ZZZ-04CZ-A
CONSUMABLE MATERIAL LIST (CML)
CONF 007
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-24-XX-01ZZZ-667Z-A A350-A-51-76-12-00ZZZ-660Z-A
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D

### Page 44

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 44
MAINTENANCE PROCEDURE (MP)
A350-A-24-41-XX-00ZZZ-170Z-A A350-A-28-12-62-05ZZZ-520Z-A
A350-A-28-12-62-05ZZZ-720Z-A
A350-A-28-12-62-06ZZZ-520Z-A
A350-A-28-12-62-06ZZZ-720Z-A
A350-A-28-12-63-07ZZZ-520Z-A
A350-A-28-12-63-07ZZZ-720Z-A
A350-A-28-21-62-08ZZZ-720Z-A
A350-A-28-21-62-0AZZZ-520Z-A
A350-A-28-25-61-03ZZZ-520Z-A
A350-A-28-25-61-03ZZZ-720Z-A
A350-A-28-25-61-05ZZZ-520Z-A
A350-A-28-25-61-05ZZZ-720Z-A
A350-A-47-20-62-00ZZZ-520Z-A
A350-A-47-20-62-00ZZZ-720Z-A
A350-A-57-27-71-00ZZZ-520Z-A
A350-A-57-27-71-00ZZZ-720Z-A
A350-A-57-27-71-01ZZZ-520Z-A
A350-A-57-27-71-01ZZZ-720Z-A
SYSTEM DESCRIPTION (SD)
A350-A-06-3X-XX-01ZZZ-04CZ-A A350-A-06-4X-XX-01ZZZ-04CZ-A
A350-A-57-2X-XX-01ZZZ-04CZ-A
CONSUMABLE MATERIAL LIST (CML)
CONF 008
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-24-XX-01ZZZ-667Z-A A350-A-51-76-12-00ZZZ-660Z-A
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP)
A350-A-24-41-XX-00ZZZ-170Z-A A350-A-28-12-62-05ZZZ-520Z-A
A350-A-28-12-62-05ZZZ-720Z-A
A350-A-28-12-62-06ZZZ-520Z-A
A350-A-28-12-62-06ZZZ-720Z-A
A350-A-28-12-63-07ZZZ-520Z-A
A350-A-28-12-63-07ZZZ-720Z-A
A350-A-28-21-62-08ZZZ-720Z-A
A350-A-28-21-62-0AZZZ-520Z-A
A350-A-28-25-61-03ZZZ-520Z-A A350-A-47-20-62-00ZZZ-520Z-A

### Page 45

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 45
MAINTENANCE PROCEDURE (MP)
A350-A-28-25-61-03ZZZ-720Z-A
A350-A-28-25-61-05ZZZ-520Z-A
A350-A-28-25-61-05ZZZ-720Z-A
A350-A-47-20-62-00ZZZ-720Z-A
A350-A-57-27-71-00ZZZ-520Z-A
A350-A-57-27-71-00ZZZ-720Z-A
A350-A-57-27-71-01ZZZ-520Z-A
A350-A-57-27-71-01ZZZ-720Z-A
SYSTEM DESCRIPTION (SD)
A350-A-06-3X-XX-01ZZZ-04CZ-A A350-A-06-4X-XX-01ZZZ-04CZ-A
A350-A-57-2X-XX-01ZZZ-04CZ-A
CONSUMABLE MATERIAL LIST (CML)
CONF 009
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-24-XX-01ZZZ-667Z-A A350-A-51-76-12-00ZZZ-660Z-A
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP)
A350-A-24-41-XX-00ZZZ-170Z-A A350-A-28-12-62-05ZZZ-520Z-A
A350-A-28-12-62-05ZZZ-720Z-A
A350-A-28-12-62-06ZZZ-520Z-A
A350-A-28-12-62-06ZZZ-720Z-A
A350-A-28-12-63-07ZZZ-520Z-A
A350-A-28-12-63-07ZZZ-720Z-A
A350-A-28-21-62-08ZZZ-720Z-A
A350-A-28-21-62-0AZZZ-520Z-A
A350-A-28-25-61-03ZZZ-520Z-A
A350-A-28-25-61-03ZZZ-720Z-A
A350-A-28-25-61-05ZZZ-520Z-A
A350-A-28-25-61-05ZZZ-720Z-A
A350-A-28-31-61-01ZZZ-520Z-A
A350-A-28-31-61-01ZZZ-720Z-A
A350-A-28-31-61-02ZZZ-520Z-A
A350-A-28-31-61-02ZZZ-720Z-A
A350-A-47-20-62-00ZZZ-520Z-A
A350-A-47-20-62-00ZZZ-720Z-A
A350-A-57-27-71-00ZZZ-520Z-A
A350-A-57-27-71-00ZZZ-720Z-A
A350-A-57-27-71-01ZZZ-520Z-A
A350-A-57-27-71-01ZZZ-720Z-A

### Page 46

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 46
SYSTEM DESCRIPTION (SD)
A350-A-06-3X-XX-01ZZZ-04CZ-A A350-A-06-4X-XX-01ZZZ-04CZ-A
A350-A-57-2X-XX-01ZZZ-04CZ-A
CONSUMABLE MATERIAL LIST (CML)
CONF 010
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-24-XX-01ZZZ-667Z-A A350-A-51-76-12-00ZZZ-660Z-A
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP)
A350-A-24-41-XX-00ZZZ-170Z-A A350-A-28-12-62-05ZZZ-520Z-A
A350-A-28-12-62-05ZZZ-720Z-A
A350-A-28-12-62-06ZZZ-520Z-A
A350-A-28-12-62-06ZZZ-720Z-A
A350-A-28-12-63-07ZZZ-520Z-A
A350-A-28-12-63-07ZZZ-720Z-A
A350-A-28-21-62-08ZZZ-720Z-A
A350-A-28-21-62-0AZZZ-520Z-A
A350-A-28-25-61-03ZZZ-520Z-A
A350-A-28-25-61-03ZZZ-720Z-A
A350-A-28-25-61-05ZZZ-520Z-A
A350-A-28-25-61-05ZZZ-720Z-A
A350-A-28-31-61-01ZZZ-520Z-A
A350-A-28-31-61-01ZZZ-720Z-A
A350-A-28-31-61-02ZZZ-520Z-A
A350-A-28-31-61-02ZZZ-720Z-A
A350-A-47-20-62-00ZZZ-520Z-A
A350-A-47-20-62-00ZZZ-720Z-A
A350-A-57-27-71-00ZZZ-520Z-A
A350-A-57-27-71-00ZZZ-720Z-A
A350-A-57-27-71-01ZZZ-520Z-A
A350-A-57-27-71-01ZZZ-720Z-A
SYSTEM DESCRIPTION (SD)
A350-A-06-3X-XX-01ZZZ-04CZ-A A350-A-06-4X-XX-01ZZZ-04CZ-A
A350-A-57-2X-XX-01ZZZ-04CZ-A
CONSUMABLE MATERIAL LIST (CML)
CONF 011
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings

### Page 47

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 47
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-24-XX-01ZZZ-667Z-A A350-A-51-76-12-00ZZZ-660Z-A
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP)
A350-A-24-41-XX-00ZZZ-170Z-A A350-A-28-12-62-04ZZZ-520Z-A
A350-A-28-12-62-04ZZZ-720Z-A
A350-A-28-12-62-05ZZZ-520Z-A
A350-A-28-12-62-05ZZZ-720Z-A
A350-A-28-12-62-06ZZZ-520Z-A
A350-A-28-12-62-06ZZZ-720Z-A
A350-A-28-12-63-07ZZZ-520Z-A
A350-A-28-12-63-07ZZZ-720Z-A
A350-A-28-25-61-03ZZZ-520Z-A
A350-A-28-25-61-03ZZZ-720Z-A
A350-A-28-25-61-05ZZZ-520Z-A
A350-A-28-25-61-05ZZZ-720Z-A
A350-A-47-20-62-00ZZZ-520Z-A
A350-A-47-20-62-00ZZZ-720Z-A
A350-A-57-27-71-00ZZZ-520Z-A
A350-A-57-27-71-00ZZZ-720Z-A
A350-A-57-27-71-01ZZZ-520Z-A
A350-A-57-27-71-01ZZZ-720Z-A
SYSTEM DESCRIPTION (SD)
A350-A-06-3X-XX-01ZZZ-04CZ-A A350-A-06-4X-XX-01ZZZ-04CZ-A
A350-A-57-2X-XX-01ZZZ-04CZ-A
CONSUMABLE MATERIAL LIST (CML)
CONF 012
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-24-XX-01ZZZ-667Z-A A350-A-51-76-12-00ZZZ-660Z-A
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D

### Page 48

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 48
MAINTENANCE PROCEDURE (MP)
A350-A-24-41-XX-00ZZZ-170Z-A A350-A-28-12-62-04ZZZ-520Z-A
A350-A-28-12-62-04ZZZ-720Z-A
A350-A-28-12-62-05ZZZ-520Z-A
A350-A-28-12-62-05ZZZ-720Z-A
A350-A-28-12-62-06ZZZ-520Z-A
A350-A-28-12-62-06ZZZ-720Z-A
A350-A-28-12-63-07ZZZ-520Z-A
A350-A-28-12-63-07ZZZ-720Z-A
A350-A-28-25-61-03ZZZ-520Z-A
A350-A-28-25-61-03ZZZ-720Z-A
A350-A-28-25-61-05ZZZ-520Z-A
A350-A-28-25-61-05ZZZ-720Z-A
A350-A-47-20-62-00ZZZ-520Z-A
A350-A-47-20-62-00ZZZ-720Z-A
A350-A-57-27-71-00ZZZ-520Z-A
A350-A-57-27-71-00ZZZ-720Z-A
A350-A-57-27-71-01ZZZ-520Z-A
A350-A-57-27-71-01ZZZ-720Z-A
SYSTEM DESCRIPTION (SD)
A350-A-06-3X-XX-01ZZZ-04CZ-A A350-A-06-4X-XX-01ZZZ-04CZ-A
A350-A-57-2X-XX-01ZZZ-04CZ-A
CONSUMABLE MATERIAL LIST (CML)
CONF 013
(1) Detailed Inspection of the Sealant in the Stringer Edges in the Wings
(a) T ask set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the Sealant in
the Stringer Edges in the Wings
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-24-XX-01ZZZ-667Z-A A350-A-51-76-12-00ZZZ-660Z-A
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP)
A350-A-24-41-XX-00ZZZ-170Z-A A350-A-28-12-62-04ZZZ-520Z-A
A350-A-28-12-62-04ZZZ-720Z-A
A350-A-28-12-62-05ZZZ-520Z-A
A350-A-28-12-62-05ZZZ-720Z-A
A350-A-28-12-62-06ZZZ-520Z-A
A350-A-28-12-62-06ZZZ-720Z-A
A350-A-28-12-63-07ZZZ-520Z-A A350-A-28-25-61-03ZZZ-520Z-A

### Page 49

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 49
MAINTENANCE PROCEDURE (MP)
A350-A-28-12-63-07ZZZ-720Z-A A350-A-28-25-61-03ZZZ-720Z-A
A350-A-28-25-61-05ZZZ-520Z-A
A350-A-28-25-61-05ZZZ-720Z-A
A350-A-28-31-61-01ZZZ-520Z-A
A350-A-28-31-61-01ZZZ-720Z-A
A350-A-28-31-61-02ZZZ-520Z-A
A350-A-28-31-61-02ZZZ-720Z-A
A350-A-47-20-62-00ZZZ-520Z-A
A350-A-47-20-62-00ZZZ-720Z-A
A350-A-57-27-71-00ZZZ-520Z-A
A350-A-57-27-71-00ZZZ-720Z-A
A350-A-57-27-71-01ZZZ-520Z-A
A350-A-57-27-71-01ZZZ-720Z-A
SYSTEM DESCRIPTION (SD)
A350-A-06-3X-XX-01ZZZ-04CZ-A A350-A-06-4X-XX-01ZZZ-04CZ-A
A350-A-57-2X-XX-01ZZZ-04CZ-A
CONSUMABLE MATERIAL LIST (CML)
CONF ALL
K. PUBLICATION AFFECTED
None
L. INDUSTRY SUPPORT INFORMATION
AIRBUS will credit the man-hours indicated in this Service Bulletin at the agreed in-house
warranty labor rate for claims received no later than 90 days after completion of the last
affected aircraft of your fleet, for the accomplishment of this Service Bulletin before 31 Oct
2025.

### Page 50

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 50
2. MATERIAL INFORMATION
A. MATERIAL APPLICABILITY
CONF 001
Material for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the
Sealant in the Stringer Edges in the Wings
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
Referenced consumables See SB
Referenced parts See SB
CONF 002
Material for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the
Sealant in the Stringer Edges in the Wings
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
Referenced consumables See SB
Referenced parts See SB
CONF 003
Material for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the
Sealant in the Stringer Edges in the Wings
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
Referenced consumables See SB
Referenced parts See SB
CONF 004
Material for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the
Sealant in the Stringer Edges in the Wings
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
Referenced consumables See SB
Referenced parts See SB
CONF 005
Material for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the
Sealant in the Stringer Edges in the Wings
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
Referenced consumables See SB

### Page 51

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 51
MATERIAL QTY SEE NOTES
Referenced parts See SB
CONF 006
Material for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the
Sealant in the Stringer Edges in the Wings
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
Referenced consumables See SB
Referenced parts See SB
CONF 007
Material for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the
Sealant in the Stringer Edges in the Wings
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
Referenced consumables See SB
Referenced parts See SB
CONF 008
Material for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the
Sealant in the Stringer Edges in the Wings
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
Referenced consumables See SB
Referenced parts See SB
CONF 009
Material for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the
Sealant in the Stringer Edges in the Wings
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
Referenced consumables See SB
Referenced parts See SB
CONF 010
Material for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the
Sealant in the Stringer Edges in the Wings
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB

### Page 52

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 52
MATERIAL QTY SEE NOTES
Referenced consumables See SB
Referenced parts See SB
CONF 011
Material for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the
Sealant in the Stringer Edges in the Wings
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
Referenced consumables See SB
Referenced parts See SB
CONF 012
Material for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the
Sealant in the Stringer Edges in the Wings
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
Referenced consumables See SB
Referenced parts See SB
CONF 013
Material for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection of the
Sealant in the Stringer Edges in the Wings
MATERIAL QTY SEE NOTES
Referenced tools See SB
Consumables See SB
Referenced consumables See SB
Referenced parts See SB
CONF ALL
B. TOOLING
CONF 001
Referenced tools for task set A350-A-57-XX-P067-01000-93BA-A Detailed
Inspection of the Sealant in the Stringer Edges in the Wings
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. MP A350-A-57-27-71-00ZZZ-520Z-A
Ref. MP A350-A-57-27-71-00ZZZ-720Z-A
Ref. MP A350-A-57-27-71-01ZZZ-520Z-A
Ref. MP A350-A-57-27-71-01ZZZ-720Z-A
CONF 002
Referenced tools for task set A350-A-57-XX-P067-01000-93BA-A Detailed
Inspection of the Sealant in the Stringer Edges in the Wings
T o accomplish this Service Bulletin it is necessary to use the tools listed in:

### Page 53

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 53
Ref. MP A350-A-57-27-71-00ZZZ-520Z-A
Ref. MP A350-A-57-27-71-00ZZZ-720Z-A
Ref. MP A350-A-57-27-71-01ZZZ-520Z-A
Ref. MP A350-A-57-27-71-01ZZZ-720Z-A
CONF 003
Referenced tools for task set A350-A-57-XX-P067-01000-93BA-A Detailed
Inspection of the Sealant in the Stringer Edges in the Wings
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. MP A350-A-57-27-71-00ZZZ-520Z-A
Ref. MP A350-A-57-27-71-00ZZZ-720Z-A
Ref. MP A350-A-57-27-71-01ZZZ-520Z-A
Ref. MP A350-A-57-27-71-01ZZZ-720Z-A
CONF 004
Referenced tools for task set A350-A-57-XX-P067-01000-93BA-A Detailed
Inspection of the Sealant in the Stringer Edges in the Wings
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. MP A350-A-57-27-71-00ZZZ-520Z-A
Ref. MP A350-A-57-27-71-00ZZZ-720Z-A
Ref. MP A350-A-57-27-71-01ZZZ-520Z-A
Ref. MP A350-A-57-27-71-01ZZZ-720Z-A
CONF 005
Referenced tools for task set A350-A-57-XX-P067-01000-93BA-A Detailed
Inspection of the Sealant in the Stringer Edges in the Wings
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. MP A350-A-57-27-71-00ZZZ-520Z-A
Ref. MP A350-A-57-27-71-00ZZZ-720Z-A
Ref. MP A350-A-57-27-71-01ZZZ-520Z-A
Ref. MP A350-A-57-27-71-01ZZZ-720Z-A
CONF 006
Referenced tools for task set A350-A-57-XX-P067-01000-93BA-A Detailed
Inspection of the Sealant in the Stringer Edges in the Wings
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. MP A350-A-57-27-71-00ZZZ-520Z-A
Ref. MP A350-A-57-27-71-00ZZZ-720Z-A
Ref. MP A350-A-57-27-71-01ZZZ-520Z-A
Ref. MP A350-A-57-27-71-01ZZZ-720Z-A
CONF 007
Referenced tools for task set A350-A-57-XX-P067-01000-93BA-A Detailed
Inspection of the Sealant in the Stringer Edges in the Wings
T o accomplish this Service Bulletin it is necessary to use the tools listed in:

### Page 54

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 54
Ref. MP A350-A-57-27-71-00ZZZ-520Z-A
Ref. MP A350-A-57-27-71-00ZZZ-720Z-A
Ref. MP A350-A-57-27-71-01ZZZ-520Z-A
Ref. MP A350-A-57-27-71-01ZZZ-720Z-A
CONF 008
Referenced tools for task set A350-A-57-XX-P067-01000-93BA-A Detailed
Inspection of the Sealant in the Stringer Edges in the Wings
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. MP A350-A-57-27-71-00ZZZ-520Z-A
Ref. MP A350-A-57-27-71-00ZZZ-720Z-A
Ref. MP A350-A-57-27-71-01ZZZ-520Z-A
Ref. MP A350-A-57-27-71-01ZZZ-720Z-A
CONF 009
Referenced tools for task set A350-A-57-XX-P067-01000-93BA-A Detailed
Inspection of the Sealant in the Stringer Edges in the Wings
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. MP A350-A-57-27-71-00ZZZ-520Z-A
Ref. MP A350-A-57-27-71-00ZZZ-720Z-A
Ref. MP A350-A-57-27-71-01ZZZ-520Z-A
Ref. MP A350-A-57-27-71-01ZZZ-720Z-A
CONF 010
Referenced tools for task set A350-A-57-XX-P067-01000-93BA-A Detailed
Inspection of the Sealant in the Stringer Edges in the Wings
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. MP A350-A-57-27-71-00ZZZ-520Z-A
Ref. MP A350-A-57-27-71-00ZZZ-720Z-A
Ref. MP A350-A-57-27-71-01ZZZ-520Z-A
Ref. MP A350-A-57-27-71-01ZZZ-720Z-A
CONF 011
Referenced tools for task set A350-A-57-XX-P067-01000-93BA-A Detailed
Inspection of the Sealant in the Stringer Edges in the Wings
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. MP A350-A-57-27-71-00ZZZ-520Z-A
Ref. MP A350-A-57-27-71-00ZZZ-720Z-A
Ref. MP A350-A-57-27-71-01ZZZ-520Z-A
Ref. MP A350-A-57-27-71-01ZZZ-720Z-A
CONF 012
Referenced tools for task set A350-A-57-XX-P067-01000-93BA-A Detailed
Inspection of the Sealant in the Stringer Edges in the Wings
T o accomplish this Service Bulletin it is necessary to use the tools listed in:

### Page 55

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 55
Ref. MP A350-A-57-27-71-00ZZZ-520Z-A
Ref. MP A350-A-57-27-71-00ZZZ-720Z-A
Ref. MP A350-A-57-27-71-01ZZZ-520Z-A
Ref. MP A350-A-57-27-71-01ZZZ-720Z-A
CONF 013
Referenced tools for task set A350-A-57-XX-P067-01000-93BA-A Detailed
Inspection of the Sealant in the Stringer Edges in the Wings
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. MP A350-A-57-27-71-00ZZZ-520Z-A
Ref. MP A350-A-57-27-71-00ZZZ-720Z-A
Ref. MP A350-A-57-27-71-01ZZZ-520Z-A
Ref. MP A350-A-57-27-71-01ZZZ-720Z-A
CONF ALL
C. CONSUMABLES
CONF 001
Consumables for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection
of the Sealant in the Stringer Edges in the Wings
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
06ABB1 Polysulfide Sealant - FuelT ank Fillet
08BBF1 Non Aqueous Cleaner - -Methyl-Ethyl-Ketone
14SBA1 T extile - Lint free Cotton
CONF 002
Consumables for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection
of the Sealant in the Stringer Edges in the Wings
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
06ABB1 Polysulfide Sealant - FuelT ank Fillet
08BBF1 Non Aqueous Cleaner - -Methyl-Ethyl-Ketone
14SBA1 T extile - Lint free Cotton
CONF 003
Consumables for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection
of the Sealant in the Stringer Edges in the Wings
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
06ABB1 Polysulfide Sealant - FuelT ank Fillet
08BBF1 Non Aqueous Cleaner - -Methyl-Ethyl-Ketone
14SBA1 T extile - Lint free Cotton

### Page 56

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 56
CONF 004
Consumables for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection
of the Sealant in the Stringer Edges in the Wings
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
06ABB1 Polysulfide Sealant - FuelT ank Fillet
08BBF1 Non Aqueous Cleaner - -Methyl-Ethyl-Ketone
14SBA1 T extile - Lint free Cotton
CONF 005
Consumables for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection
of the Sealant in the Stringer Edges in the Wings
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
06ABB1 Polysulfide Sealant - FuelT ank Fillet
08BBF1 Non Aqueous Cleaner - -Methyl-Ethyl-Ketone
14SBA1 T extile - Lint free Cotton
CONF 006
Consumables for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection
of the Sealant in the Stringer Edges in the Wings
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
06ABB1 Polysulfide Sealant - FuelT ank Fillet
08BBF1 Non Aqueous Cleaner - -Methyl-Ethyl-Ketone
14SBA1 T extile - Lint free Cotton
CONF 007
Consumables for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection
of the Sealant in the Stringer Edges in the Wings
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
06ABB1 Polysulfide Sealant - FuelT ank Fillet
08BBF1 Non Aqueous Cleaner - -Methyl-Ethyl-Ketone
14SBA1 T extile - Lint free Cotton
CONF 008
Consumables for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection
of the Sealant in the Stringer Edges in the Wings
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
06ABB1 Polysulfide Sealant - FuelT ank Fillet

### Page 57

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 57
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
08BBF1 Non Aqueous Cleaner - -Methyl-Ethyl-Ketone
14SBA1 T extile - Lint free Cotton
CONF 009
Consumables for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection
of the Sealant in the Stringer Edges in the Wings
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
06ABB1 Polysulfide Sealant - FuelT ank Fillet
08BBF1 Non Aqueous Cleaner - -Methyl-Ethyl-Ketone
14SBA1 T extile - Lint free Cotton
CONF 010
Consumables for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection
of the Sealant in the Stringer Edges in the Wings
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
06ABB1 Polysulfide Sealant - FuelT ank Fillet
08BBF1 Non Aqueous Cleaner - -Methyl-Ethyl-Ketone
14SBA1 T extile - Lint free Cotton
CONF 011
Consumables for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection
of the Sealant in the Stringer Edges in the Wings
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
06ABB1 Polysulfide Sealant - FuelT ank Fillet
08BBF1 Non Aqueous Cleaner - -Methyl-Ethyl-Ketone
14SBA1 T extile - Lint free Cotton
CONF 012
Consumables for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection
of the Sealant in the Stringer Edges in the Wings
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
06ABB1 Polysulfide Sealant - FuelT ank Fillet
08BBF1 Non Aqueous Cleaner - -Methyl-Ethyl-Ketone
14SBA1 T extile - Lint free Cotton
CONF 013
Consumables for task set A350-A-57-XX-P067-01000-93BA-A Detailed Inspection
of the Sealant in the Stringer Edges in the Wings

### Page 58

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 58
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
06ABB1 Polysulfide Sealant - FuelT ank Fillet
08BBF1 Non Aqueous Cleaner - -Methyl-Ethyl-Ketone
14SBA1 T extile - Lint free Cotton
CONF 001
Referenced consumables for task set A350-A-57-XX-P067-01000-93BA-A Detailed
Inspection of the Sealant in the Stringer Edges in the Wings
T o accomplish this Service Bulletin it is necessary to use the consumable materials listed in:
Ref. MP A350-A-28-25-61-03ZZZ-720Z-A
Ref. MP A350-A-28-25-61-05ZZZ-720Z-A
Ref. MP A350-A-47-20-62-00ZZZ-720Z-A
Ref. MP A350-A-28-12-63-02ZZZ-720Z-A
Ref. MP A350-A-28-12-62-04ZZZ-720Z-A
Ref. MP A350-A-28-21-62-08ZZZ-720Z-A
Ref. MP A350-A-28-12-63-07ZZZ-720Z-A
Ref. MP A350-A-28-12-62-05ZZZ-720Z-A
Ref. MP A350-A-28-12-62-06ZZZ-720Z-A
Ref. MP A350-A-28-12-63-00ZZZ-720Z-A
Ref. MP A350-A-28-12-63-06ZZZ-720Z-A
Ref. MP A350-A-28-12-63-08ZZZ-720Z-A
Ref. MP A350-A-28-12-63-03ZZZ-720Z-A
Ref. MP A350-A-28-12-62-0BZZZ-720Z-A
Ref. MP A350-A-57-27-71-00ZZZ-720Z-A
Ref. MP A350-A-57-27-71-01ZZZ-720Z-A
CONF 002
Referenced consumables for task set A350-A-57-XX-P067-01000-93BA-A Detailed
Inspection of the Sealant in the Stringer Edges in the Wings
T o accomplish this Service Bulletin it is necessary to use the consumable materials listed in:
Ref. MP A350-A-28-25-61-03ZZZ-720Z-A
Ref. MP A350-A-28-25-61-05ZZZ-720Z-A
Ref. MP A350-A-47-20-62-00ZZZ-720Z-A
Ref. MP A350-A-28-12-63-02ZZZ-720Z-A
Ref. MP A350-A-28-12-62-04ZZZ-720Z-A
Ref. MP A350-A-28-21-62-08ZZZ-720Z-A
Ref. MP A350-A-28-12-63-07ZZZ-720Z-A
Ref. MP A350-A-28-12-62-05ZZZ-720Z-A
Ref. MP A350-A-28-12-62-06ZZZ-720Z-A

### Page 59

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 59
Ref. MP A350-A-28-12-63-00ZZZ-720Z-A
Ref. MP A350-A-28-12-63-06ZZZ-720Z-A
Ref. MP A350-A-28-12-63-08ZZZ-720Z-A
Ref. MP A350-A-28-12-63-03ZZZ-720Z-A
Ref. MP A350-A-28-12-62-0BZZZ-720Z-A
Ref. MP A350-A-57-27-71-00ZZZ-720Z-A
Ref. MP A350-A-57-27-71-01ZZZ-720Z-A
CONF 003
Referenced consumables for task set A350-A-57-XX-P067-01000-93BA-A Detailed
Inspection of the Sealant in the Stringer Edges in the Wings
T o accomplish this Service Bulletin it is necessary to use the consumable materials listed in:
Ref. MP A350-A-28-25-61-03ZZZ-720Z-A
Ref. MP A350-A-28-25-61-05ZZZ-720Z-A
Ref. MP A350-A-28-12-62-04ZZZ-720Z-A
Ref. MP A350-A-28-21-62-08ZZZ-720Z-A
Ref. MP A350-A-28-12-63-07ZZZ-720Z-A
Ref. MP A350-A-28-12-62-05ZZZ-720Z-A
Ref. MP A350-A-28-12-62-06ZZZ-720Z-A
Ref. MP A350-A-47-20-62-00ZZZ-720Z-A
Ref. MP A350-A-28-12-62-0BZZZ-720Z-A
Ref. MP A350-A-57-27-71-00ZZZ-720Z-A
Ref. MP A350-A-57-27-71-01ZZZ-720Z-A
CONF 004
Referenced consumables for task set A350-A-57-XX-P067-01000-93BA-A Detailed
Inspection of the Sealant in the Stringer Edges in the Wings
T o accomplish this Service Bulletin it is necessary to use the consumable materials listed in:
Ref. MP A350-A-28-25-61-03ZZZ-720Z-A
Ref. MP A350-A-28-25-61-05ZZZ-720Z-A
Ref. MP A350-A-28-12-62-04ZZZ-720Z-A
Ref. MP A350-A-28-21-62-08ZZZ-720Z-A
Ref. MP A350-A-28-12-63-07ZZZ-720Z-A
Ref. MP A350-A-28-12-62-05ZZZ-720Z-A
Ref. MP A350-A-28-12-62-06ZZZ-720Z-A
Ref. MP A350-A-47-20-62-00ZZZ-720Z-A
Ref. MP A350-A-28-12-62-0BZZZ-720Z-A
Ref. MP A350-A-57-27-71-00ZZZ-720Z-A
Ref. MP A350-A-57-27-71-01ZZZ-720Z-A

### Page 60

A350
SERVICE BULLETIN
REV 00 Sep 17/20 A350-57-P067
Page 60
CONF 005
Referenced consumables for task set A350-A-57-XX-P067-01000-93BA-A Detailed
Inspection of the Sealant in the Stringer Edges in the Wings
T o accomplish this Service Bulletin it is necessary to use the consumable materials listed in:
Ref. MP A350-A-28-25-61-03ZZZ-720Z-A
Ref. MP A350-A-28-25-61-05ZZZ-720Z-A
Ref. MP A350-A-28-31-61-01ZZZ-720Z-A
Ref. MP A350-A-28-31-61-02ZZZ-720Z-A
Ref. MP A350-A-28-12-62-04ZZZ-720Z-A
Ref. MP A350-A-28-21-62-08ZZZ-720Z-A
Ref. MP A350-A-28-12-63-07ZZZ-720Z-A
Ref. MP A350-A-28-12-62-05ZZZ-720Z-A
Ref. MP A350-A-28-12-62-06ZZZ-720Z-A
Ref. MP A350-A-47-20-62-00ZZZ-720Z-A
Ref. MP A350-A-28-12-62-0BZZZ-720Z-A
Ref. MP A350-A-57-27-71-00ZZZ-720Z-A
Ref. MP A350-A-57-27-71-01ZZZ-720Z-A
CONF 006
Referenced consumables for task set A350-A-57-XX-P067-01000-93BA-A Detailed
Inspection of the Sealant in the Stringer Edges in the Wings
T o accomplish this Service Bulletin it is necessary to use the consumable materials listed in:
Ref. MP A350-A-28-25-61-03ZZZ-720Z-A
Ref. MP A350-A-28-25-61-05ZZZ-720Z-A
Ref. MP A350-A-28-31-61-01ZZZ-720Z-A
Ref. MP A350-A-28-31-61-02ZZZ-720Z-A
Ref. MP A350-A-28-12-62-04ZZZ-720Z-A
Ref. MP A350-A-28-21-62-08ZZZ-720Z-A
Ref. MP A350-A-28-12-63-07ZZZ-720Z-A
Ref. MP A350-A-28-12-62-05ZZZ-720Z-A
Ref. MP A350-A-28-12-62-06ZZZ-720Z-A
Ref. MP A350-A-47-20-62-00ZZZ-720Z-A
Ref. MP A350-A-28-12-62-0BZZZ-720Z-A
Ref. MP A350-A-57-27-71-00ZZZ-720Z-A
Ref. MP A350-A-57-27-71-01ZZZ-720Z-A
CONF 007
Referenced consumables for task set A350-A-57-XX-P067-01000-93BA-A Detailed
Inspection of the Sealant in the Stringer Edges in the Wings
T o accomplish this Service Bulletin it is necessary to use the consumable materials listed in:
Ref. MP A350-A-28-25-61-03ZZZ-720Z-A

The text continues at https://openairdocs.org/service-documents/airbus/a350-57-p067/file/23e2fee117d6.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
