# Airbus Service Bulletin A350-57-P069

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 1 ("SB A350-57-P069_Rev 01"), 286 pages: PDF https://openairdocs.org/files/sha256/39/e2/39e2d35d43fffb61abfaa9e53507250a80e9664abe034974cf302ced4aa5636e; text https://openairdocs.org/service-documents/airbus/a350-57-p069/file/39e2d35d43ff.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2025-0345, the docket of AD 2025-14-09. Not covered by OpenAirDocs’ CC0 dedication.
- No revision named ("SB 57-P069"), 238 pages: PDF https://openairdocs.org/files/sha256/c3/0a/c30ab78b0faff8ace948c734080dd93235d14ebd422b39dd1cd582189224551e; text https://openairdocs.org/service-documents/airbus/a350-57-p069/file/c30ab78b0faf.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2022-1248, the docket of AD 2022-27-01. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: A350-57-P069
- Latest revision known: A350-57-P069, Revision 1 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus/a350-57-p069

## Text (286 pages)

Revision 1, the newest copy. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2025-0345, the docket of AD 2025-14-09. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 1
CONF ALL
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
 
The content of this document is the property of Airbus. All rights including copyrights are reserved.
It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may information
contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of the
copyright. Requests for reproduction of any data in this document and the media authorized for it must
be addressed to Airbus.
MANDATORY MANDATORY MANDATORY
ATA SYSTEM: 57
TITLE: WINGS - CENTER WING - FASTENERS REPLACEMENT IN THE CENTER
WING BOX AT THE REAR SPAR AND THE FRONT SPAR LOWER AREA
MODIFICATION No.:
116374L27002
116559L27019
CONF 001 003 004
116810L27029

### Page 2

A350
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 2
ATA SYSTEM: 57
TITLE: WINGS - CENTER WING - FASTENERS REPLACEMENT IN THE CENTER
WING BOX AT THE REAR SPAR AND THE FRONT SPAR LOWER AREA
CONF ALL
REVISION TRANSMITTAL SHEET
This page transmits Revision No. 01 of Service Bulletin No. A350-57-P069.
A. ADDITIONAL WORK
No additional work is required by this revision.
B. REASON
Revision No. 01 issued to:
- Update the applicability of this Service Bulletin to add MSN 0005
- Replace the bonding code "P1" with "_1B3M2" in Fig.BE Sol.AA, Sol.AC and Fig.BD
Sol.AA, Sol.AC
- Added the electrical bonding test reference
- Update the toque value in the nut item(56), between 6.30 Nm (55.760 lbf.in) and 8.20
Nm (72.576 lbf.in)
- Add instructions to remove/install hydraulic bracket in case of clash
- Add a note to allow removal/installation of swaged pin in case of clash.
NOTE: This revision satisfies the requirements of the subsequent Repair and Design
Approval Form (RDAF) issued for the related MSNs.
RDAF MSNs
81006239/103/2023 0088, 0102, 0110, 0125, 0141, 0161, 0215, 0229, 0241, 0266,
0332, 0346, 0350, 0356, 0368, 0372, 0382, 0399 and 0420
81006239/195/2023 0006, 0007, 0008, 0009, 0010, 0011, 0012, 0013, 0021, 0025,
0033, 0036, 0042, 0047, 0063, 0069, 0076, 0078, 0083, 0088,
0090, 0100, 0102, 0106, 0110, 0114, 0125, 0126, 0132, 0141,
0143, 0161, 0163, 0172, 0207, 0211, 0214, 0215, 0229, 0237,
0241, 0249, 0257, 0266, 0332, 0346, 0350, 0356, 0368, 0372,
0382, 0399 and 0420
81006239/202/2024 0416 and 0468
81050077/053/2024 0024, 0027, 0048, 0064, 0115, 0135, 0149, 0160, 0164, 0175,
0182, 0190, 0199, 0200, 0204, 0210, 0250, 0265, 0267, 0277,
0282, 0313, 0395 and 0404
81120465/092/2023 0129
81120465/113/2023 0015
81120465/161/2023 0150
81120465/172/2023 0173
81120465/201/2024 0192
81123546/013/2024 0044, 0050, 0095, 0111, 0123, 0130,0 0142, 0177, 0181, 0185,
0189 and 0201
81125187/008/2023 0091
81172648/022/2024 0326, 0340, 0362, 0374, 0386, 0402, 0432 and 0446

### Page 3

A350
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 3
RDAF MSNs
81362782/004/2024 0045
81382688/011/2024 0219
C. CHANGES
CONF 001
PLANNING INFORMATION
APPLICABILITY - Note updated to extend the production applicability
- MOD data of 116810L27029 updated from Service
Bulletin only to series solution only.
COMPLIANCE
Accomplishment Timescale Note is updated.
REFERENCES
T ask set A350-A-57-XX-P069-
01000-93AA-A Replacement of
the Fasteners on the Rear Spar
and the Front Spar
Reference added.
INDUSTRY SUPPORT INFORMATION Sentences added.
MATERIAL INFORMATION
LIST OF NEW PARTS
Part kit 57P069A01R01 Cost value updated.
Part kit 57P069A04R04 Cost value updated.
Components for task set A350-
A-57-XX-P069-01000-93AA-A
Replacement of the Fasteners
on the Rear Spar and the Front
Spar
- Updated PN EN6115V4-8 quantity from 12 to 8
- Updated PN EN6115V6-14 quantity from 12 to 8
- Updated PN ASNA2531-4 quantity from 8 to 4
- Updated PN ASNA2531-6 quantity from 8 to 4.
ACCOMPLISHMENT INSTRUCTIONS
T ask set A350-A-57-XX-P069-01000-93AA-A Replacement of the Fasteners on the Rear Spar
and the Front Spar
PREPARATION
A350-A-57-XX-P069-
01001-540A-A General Job
Set-Up
Caution added.
PROCEDURE
A350-A-57-XX-P069-
01001-920A-A Replace
the Fasteners on the Front
Spar, LH Side
- Added sentence in Standard Practices for fastener
hole diameters and drill data in composite and hybrid
structure
- Caution added
- Updated the word area with outer CWB
- CML added
- MP reference added for electrical bonding step
- Steps added for the removal and installation of
hydraulic bracket to gain access to bracket item (20)

### Page 4

A350
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 4
- Note added for removal/installationof swaged pin in
case of clash.
Fig.BB Sol.AA Replacement
of the fasteners on the
Front Spar
- Updated to add views for the removal and
installation of hydraulic bracket
- Note added to avoid clash between the fasteners
during removal or installation of fasteners
- Updated Fastener table to remove PNs EN6115V4-8,
EN6115V6-14, ASNA2531-4 and ASNA2531-6.
A350-A-57-XX-P069-
03001-920A-A Replace
the Fasteners on the Rear
Spar, LH Side
- Warning and cautions are added
- Added sentence in Standard Practices for fastener
hole diameters and drill data in composite and hybrid
structure
- Updated the word area with outer CWB
- Note updated for the torque value
- CML added
- MP reference added for electrical bonding step
- Wording updated for the procedure step.
Fig.BE Sol.AA Replacement
of the Fasteners on the
Rear Spar, LH Side
Illustration is updated to replace the bonding code
"P1" with "_1B3M2".
Fig.BI Sol.AA Removal/
Installation of the Fittings
on the Rear Spar, LH Side
- Note updated for the torque value
A350-A-57-XX-P069-
02001-920A-A Replace
the Fasteners on the Front
Spar, RH Side
- Added sentence in Standard Practices for fastener
hole diameters and drill data in composite and hybrid
structure
- Caution added
- Updated the word area with outer CWB
- CML added
- MP reference added for electrical bonding step
- Steps added for the removal and installation of
hydraulic bracket to gain access to bracket item (20).
Fig.BB Sol.AA Replacement
of the fasteners on the
Front Spar
- Updated to add views for the removal and
installation of hydraulic bracket
- Note added to avoid clash between the fasteners
during removal or installation of fasteners
- Updated Fastener table to remove PNs EN6115V4-8,
EN6115V6-14, ASNA2531-4 and ASNA2531-6.
A350-A-57-XX-P069-
04001-920A-A Replace
the Fasteners on the Rear
Spar, RH Side
- Warning and cautions are added
- Added sentence in Standard Practices for fastener
hole diameters and drill data in composite and hybrid
structure
- Updated the word area with outer CWB
- Note updated for the torque value
- CML added

### Page 5

A350
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 5
- MP reference added for electrical bonding step
- Wording updated for the procedure step.
Fig.BD Sol.AA
Replacement of the
Fasteners on the Rear
Spar, RH Side
Illustration is updated to replace the bonding code
"P1" with "_1B3M2".
Fig.BH Sol.AA Removal/
Installation of the Fittings
on the Rear Spar, RH Side
- Note updated for the torque value.
T ask A350-A-57-XX-P069-02001-900A-C On Bench, Ream the Fittings
Fig.BJ Sol.AB Ream the
Fittings
Illustration is updated to add note
CONF 002
PLANNING INFORMATION
APPLICABILITY - Note updated to extend the production applicability
- MOD data of 116810L27029 updated from Service
Bulletin only to series solution only.
COMPLIANCE
Accomplishment Timescale Note is updated.
REFERENCES
T ask set A350-A-57-XX-P069-
01000-93AA-A Replacement of
the Fasteners on the Rear Spar
and the Front Spar
Reference added.
INDUSTRY SUPPORT INFORMATION Sentences added.
MATERIAL INFORMATION
LIST OF NEW PARTS
Part kit 57P069A03R02 Cost value updated.
Part kit 57P069A05R02 Cost value updated
ACCOMPLISHMENT INSTRUCTIONS
T ask set A350-A-57-XX-P069-01000-93AA-A Replacement of the Fasteners on the Rear Spar
and the Front Spar
PROCEDURE
T ask A350-A-57-XX-P069-01003-920A-A Replace the Fasteners on the Front Spar,
LH Side
Fig.BB Sol.AC Replacement
of the fasteners on the
Front Spar
- Updated to add views for the removal and
installation of hydraulic bracket
- Note added to avoid clash between the fasteners
during removal or installation of fasteners
- Updated Fastener table to remove PNs EN6115V4-8,
EN6115V6-14, ASNA2531-4 and ASNA2531-6.
A350-A-57-XX-P069-
03003-920A-A Replace
the Fasteners on the Rear
Spar, LH Side
- Warning and cautions are added
- Added sentence in Standard Practices for fastener
hole diameters and drill data in composite and hybrid
structure
- Updated the word area with outer CWB

### Page 6

A350
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 6
- CML added
- MP reference added for electrical bonding step
- Wording updated for the procedure step
- Fitting (10) quantity is updated from 2 to 1.
Fig.BE Sol.AC Replacement
of the Fasteners on the
Rear Spar, LH Side
Illustration is updated to replace the bonding code
"P1" with "_1B3M2".
A350-A-57-XX-P069-
02003-920A-A Replace
the Fasteners on the Front
Spar, RH Side
- Added sentence in Standard Practices for fastener
hole diameters and drill data in composite and hybrid
structure
- Caution added
- Updated the word area with outer CWB
- CML added
- MP reference added for electrical bonding step
- MBN item (21) is deleted
- Stripping diameter updated from 22 mm to 24 mm
- Wording updated for the procedure step
- Steps added for the removal and installation of
hydraulic bracket to gain access to bracket item (20).
Fig.BB Sol.AC Replacement
of the fasteners on the
Front Spar
- Updated to add views for the removal and
installation of hydraulic bracket
- Note added to avoid clash between the fasteners
during removal or installation of fasteners
- Updated Fastener table to remove PNs EN6115V4-8,
EN6115V6-14, ASNA2531-4 and ASNA2531-6.
A350-A-57-XX-P069-
04003-920A-A Replace
the Fasteners on the Rear
Spar, RH Side
- Warning and cautions are added
- Added sentence in Standard Practices for fastener
hole diameters and drill data in composite and hybrid
structure
- Updated the word area with outer CWB
- CML added.
- MP reference added for electrical bonding step
- Item number updated
- Wording updated for the procedure step.
Fig.BD Sol.AC Replacement
of the Fasteners on the
Rear Spar, RH Side
Illustration is updated to replace the bonding code
"P1" with "_1B3M2".
T ask A350-A-57-XX-P069-02002-900A-C On Bench, Ream the Fittings
Fig.BJ Sol.AA Ream the
Fittings
Illustration is updated to add note
CONF 003
PLANNING INFORMATION
APPLICABILITY - Note updated to extend the production applicability

### Page 7

A350
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 7
- MOD data of 116810L27029 updated from Service
Bulletin only to series solution only.
COMPLIANCE
Accomplishment Timescale Note is updated.
REFERENCES
T ask set A350-A-57-XX-P069-
01000-93AA-A Replacement of
the Fasteners on the Rear Spar
and the Front Spar
Reference added.
INDUSTRY SUPPORT INFORMATION Sentences added.
MATERIAL INFORMATION
LIST OF NEW PARTS
Part kit 57P069A02R01 Cost value and lead times updated.
Part kit 57P069A04R04 Cost value updated.
Components for task set A350-
A-57-XX-P069-01000-93AA-A
Replacement of the Fasteners
on the Rear Spar and the Front
Spar
- Updated PN EN6115V4-8 quantity from 12 to 8
- Updated PN EN6115V6-14 quantity from 12 to 8
- Updated PN ASNA2531-4 quantity from 8 to 4
- Updated PN ASNA2531-6 quantity from 8 to 4.
ACCOMPLISHMENT INSTRUCTIONS
T ask set A350-A-57-XX-P069-01000-93AA-A Replacement of the Fasteners on the Rear Spar
and the Front Spar
PREPARATION
A350-A-57-XX-P069-
01001-540A-A General Job
Set-Up
Caution added.
PROCEDURE
A350-A-57-XX-P069-
01001-920A-A Replace
the Fasteners on the Front
Spar, LH Side
- Added sentence in Standard Practices for fastener
hole diameters and drill data in composite and hybrid
structure
- Caution added
- Updated the word area with outer CWB
- CML added
- MP reference added for electrical bonding step
- Steps added for the removal and installation of
hydraulic bracket to gain access to bracket item (20)
- Note added for removal/installationof swaged pin in
case of clash.
Fig.BB Sol.AA Replacement
of the fasteners on the
Front Spar
- Updated to add views for the removal and
installation of hydraulic bracket
- Note added to avoid clash between the fasteners
during removal or installation of fasteners
- Updated Fastener table to remove PNs EN6115V4-8,
EN6115V6-14, ASNA2531-4 and ASNA2531-6.
A350-A-57-XX-P069-
03002-920A-A Replace
- Warning and cautions are added

### Page 8

A350
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 8
the Fasteners on the Rear
Spar, LH Side
- Added sentence in Standard Practices for fastener
hole diameters and drill data in composite and hybrid
structure
- Updated the word area with outer CWB
- Note updated for the torque value
- CML added
- MP reference added for electrical bonding step
- Wording updated for the procedure step.
Fig.BE Sol.AB Replacement
of the Fasteners on the
Rear Spar, LH Side
Illustration is updated to replace the bonding code
"P1" with "_1B3M2".
Fig.BI Sol.AA Removal/
Installation of the Fittings
on the Rear Spar, LH Side
- Note updated for the torque value
A350-A-57-XX-P069-
02001-920A-A Replace
the Fasteners on the Front
Spar, RH Side
- Added sentence in Standard Practices for fastener
hole diameters and drill data in composite and hybrid
structure
- Caution added
- Updated the word area with outer CWB
- CML added
- MP reference added for electrical bonding step
- Steps added for the removal and installation of
hydraulic bracket to gain access to bracket item (20).
Fig.BB Sol.AA Replacement
of the fasteners on the
Front Spar
- Updated to add views for the removal and
installation of hydraulic bracket
- Note added to avoid clash between the fasteners
during removal or installation of fasteners
- Updated Fastener table to remove PNs EN6115V4-8,
EN6115V6-14, ASNA2531-4 and ASNA2531-6.
A350-A-57-XX-P069-
04002-920A-A Replace
the Fasteners on the Rear
Spar, RH Side
- Warning and cautions are added
- Added sentence in Standard Practices for fastener
hole diameters and drill data in composite and hybrid
structure
- Updated the word area with outer CWB
- Note updated for the torque value
- CML added
- MP reference added for electrical bonding step
- Wording updated for the procedure step.
Fig.BD Sol.AB Replacement
of the Fasteners on the
Rear Spar, RH Side
Illustration is updated to replace the bonding code
"P1" with "_1B3M2".
Fig.BH Sol.AA Removal/
Installation of the Fittings
on the Rear Spar, RH Side
- Note updated for the torque value.
T ask A350-A-57-XX-P069-02001-900A-C On Bench, Ream the Fittings

### Page 9

A350
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 9
Fig.BJ Sol.AB Ream the
Fittings
Illustration is updated to add note
CONF 004
PLANNING INFORMATION
APPLICABILITY - Note updated to extend the production applicability
- MOD data of 116810L27029 updated from Service
Bulletin only to series solution only.
COMPLIANCE
Accomplishment Timescale Note is updated.
REFERENCES
T ask set A350-A-57-XX-P069-
01000-93AA-A Replacement of
the Fasteners on the Rear Spar
and the Front Spar
Reference added.
INDUSTRY SUPPORT INFORMATION Sentences added.
MATERIAL INFORMATION
LIST OF NEW PARTS
Part kit 57P069A02R01 Cost value and lead times updated.
Part kit 57P069A04R04 Cost value updated.
Components for task set A350-
A-57-XX-P069-01000-93AA-A
Replacement of the Fasteners
on the Rear Spar and the Front
Spar
- Updated PN EN6115V4-8 quantity from 12 to 8
- Updated PN EN6115V6-14 quantity from 12 to 8
- Updated PN ASNA2531-4 quantity from 8 to 4
- Updated PN ASNA2531-6 quantity from 8 to 4.
ACCOMPLISHMENT INSTRUCTIONS
T ask set A350-A-57-XX-P069-01000-93AA-A Replacement of the Fasteners on the Rear Spar
and the Front Spar
PREPARATION
A350-A-57-XX-P069-
01001-540A-A General Job
Set-Up
Caution added.
PROCEDURE
A350-A-57-XX-P069-
01002-920A-A Replace
the Fasteners on the Front
Spar, LH Side
- Added sentence in Standard Practices for fastener
hole diameters and drill data in composite and hybrid
structure
- Caution added
- Updated the word area with outer CWB
- CML added
- MP reference added for electrical bonding step
- Steps added for the removal and installation of
hydraulic bracket to gain access to bracket item (20)
- Note added for removal/installationof swaged pin in
case of clash.

### Page 10

A350
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 10
Fig.BB Sol.AB Replacement
of the fasteners on the
Front Spar
- Updated to add views for the removal and
installation of hydraulic bracket
- Note added to avoid clash between the fasteners
during removal or installation of fasteners
- Updated Fastener table to remove PNs EN6115V4-8,
EN6115V6-14, ASNA2531-4 and ASNA2531-6.
A350-A-57-XX-P069-
03002-920A-A Replace
the Fasteners on the Rear
Spar, LH Side
- Warning and cautions are added
- Added sentence in Standard Practices for fastener
hole diameters and drill data in composite and hybrid
structure
- Updated the word area with outer CWB
- Note updated for the torque value
- CML added
- MP reference added for electrical bonding step
- Wording updated for the procedure step.
Fig.BE Sol.AB Replacement
of the Fasteners on the
Rear Spar, LH Side
Illustration is updated to replace the bonding code
"P1" with "_1B3M2".
Fig.BI Sol.AA Removal/
Installation of the Fittings
on the Rear Spar, LH Side
- Note updated for the torque value
A350-A-57-XX-P069-
02002-920A-A Replace
the Fasteners on the Front
Spar, RH Side
- Added sentence in Standard Practices for fastener
hole diameters and drill data in composite and hybrid
structure
- Caution added
- Updated the word area with outer CWB
- CML added
- MP reference added for electrical bonding step
- Steps added for the removal and installation of
hydraulic bracket to gain access to bracket item (20).
Fig.BB Sol.AB Replacement
of the fasteners on the
Front Spar
- Updated to add views for the removal and
installation of hydraulic bracket
- Note added to avoid clash between the fasteners
during removal or installation of fasteners
- Updated Fastener table to remove PNs EN6115V4-8,
EN6115V6-14, ASNA2531-4 and ASNA2531-6.
A350-A-57-XX-P069-
04002-920A-A Replace
the Fasteners on the Rear
Spar, RH Side
- Warning and cautions are added
- Added sentence in Standard Practices for fastener
hole diameters and drill data in composite and hybrid
structure
- Updated the word area with outer CWB
- Note updated for the torque value
- CML added
- MP reference added for electrical bonding step

### Page 11

A350
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 11
- Wording updated for the procedure step.
Fig.BD Sol.AB Replacement
of the Fasteners on the
Rear Spar, RH Side
Illustration is updated to replace the bonding code
"P1" with "_1B3M2".
Fig.BH Sol.AA Removal/
Installation of the Fittings
on the Rear Spar, RH Side
- Note updated for the torque value.
T ask A350-A-57-XX-P069-02001-900A-C On Bench, Ream the Fittings
Fig.BJ Sol.AB Ream the
Fittings
Illustration is updated to add note
CONF ALL
D. FILING INSTRUCTIONS
This Service Bulletin has been generated electronically and is reissued as a complete
document. Replace the complete document.
Put this Revision Transmittal Sheet in front of the Service Bulletin.
E. HISTORY OF PREVIOUS REVISIONS
No previous revision
F. REVISION SEQUENCE
ORIGINAL: Nov 16/21
REVISION No. : 01 - Jun 07/24

### Page 12

A350
SERVICE BULLETIN
SUMMARY
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 12
ATA SYSTEM: 57
TITLE: WINGS - CENTER WING - FASTENERS REPLACEMENT IN THE CENTER
WING BOX AT THE REAR SPAR AND THE FRONT SPAR LOWER AREA
SUMMARY
This summary is for information only and is not approved for modification of the aircraft.
A. MODIFICATIONS
CONF 001
MODIFICATION CLASSIFICATION
MAJOR 116374L27002 116559L27019
MINOR 116810L27029
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
NOTE: This modification is related to an airworthiness issue and has been re-classified and
confirmed by EASA as minor in accordance with EU Part 21.A.91. As such, this is
handled by Airbus under the Design Organisation Approval ref. EASA.21J.031.
CONF 002
MODIFICATION CLASSIFICATION
MAJOR 116374L27002 116559L27019
MINOR None
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
CONF 003
MODIFICATION CLASSIFICATION
MAJOR 116374L27002 116559L27019
MINOR 116810L27029
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
NOTE: This modification is related to an airworthiness issue and has been re-classified and
confirmed by EASA as minor in accordance with EU Part 21.A.91. As such, this is
handled by Airbus under the Design Organisation Approval ref. EASA.21J.031.
CONF 004
MODIFICATION CLASSIFICATION
MAJOR 116374L27002 116559L27019
MINOR 116810L27029

### Page 13

A350
SERVICE BULLETIN
SUMMARY
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 13
NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.
NOTE: This modification is related to an airworthiness issue and has been re-classified and
confirmed by EASA as minor in accordance with EU Part 21.A.91. As such, this is
handled by Airbus under the Design Organisation Approval ref. EASA.21J.031.
CONF ALL
B. REASON
(1) History
It has been identified by in service experience that some fasteners may rotate inside
their fastener holes of the Center Wing Box (CWB) at front and rear spar area. This
rotation can cause a crack on the fastener head and nut sealant cover, this generate a
risk of voltage sparking and out gassing in case of lighting strike.
(2) Objective/Action
This Service Bulletin details the replacement of fasteners and introduce additional
head nut cap protection at front and rear spar in the CWB.
(3) Advantages
Accomplishment of this Service Bulletin will ensure the tightness and lightning
requirement adherence of the CWB fasteners and prevent voltage sparking and out
gassing in case of lighting strike.
(4) Operational/Maintenance Consequences
None
C. GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE MANDATORY COST SAVING NO
A/C OPERATION
AFFECTED
NO VENDOR SB NO
CANCELS INSPECTION SB NO ETOPS AFFECTED NO
PAX COMFORT AFFECTED NO POTENTIAL AD YES
RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO
LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO
VALIDATION ON AIRCRAFT NO BOOKLET AVAILABLE NO
NOTE: Service Bulletin must be accomplished.
D. MAINTENANCE CONFIGURATION
CONF 001
MAINTENANCE CONFIGURATION
FUEL TANKS OPENED YES
CONF 002
MAINTENANCE CONFIGURATION
FUEL TANKS OPENED YES

### Page 14

A350
SERVICE BULLETIN
SUMMARY
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 14
CONF 003
MAINTENANCE CONFIGURATION
FUEL TANKS OPENED YES
CONF 004
MAINTENANCE CONFIGURATION
FUEL TANKS OPENED YES
CONF ALL
E. MATERIAL PRICE INFORMATION
CONF 001
(1) Replacement of the Fasteners on the Rear Spar and the Front Spar
(a) T ask set A350-A-57-XX-P069-01000-93AA-A Replacement of the Fasteners on the
Rear Spar and the Front Spar
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS
Part kit 57P069A01R01 2 17460.00 USD Bolts, caps, nuts, washers
Part kit 57P069A04R04 2 256.00 USD Bolts, caps, nuts, washers
TOTAL   17716.00 USD  
Aircraft standard tools See SB See Note Reamers Set T ool
Components See SB See Note Nut, bolt, Pin-cotter
NOTE: Price information to be obtained from the given supplier.
CONF 002
(1) Replacement of the Fasteners on the Rear Spar and the Front Spar
(a) T ask set A350-A-57-XX-P069-01000-93AA-A Replacement of the Fasteners on the
Rear Spar and the Front Spar
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS
Part kit 57P069A03R02 2 6440.00 USD Bolts, caps, nuts, washers
Part kit 57P069A05R02 2 246.00 USD Bolts, caps, nuts, washers
TOTAL   6686.00 USD  
Aircraft standard tools See SB See Note Reamers Set T ool
Components See SB See Note Pin-cotter
NOTE: Price information to be obtained from the given supplier.
CONF 003
(1) Replacement of the Fasteners on the Rear Spar and the Front Spar

### Page 15

A350
SERVICE BULLETIN
SUMMARY
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 15
(a) T ask set A350-A-57-XX-P069-01000-93AA-A Replacement of the Fasteners on the
Rear Spar and the Front Spar
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS
Part kit 57P069A02R01 2 6440.00 USD Bolts, caps, nuts, washers
Part kit 57P069A04R04 2 256.00 USD Bolts, caps, nuts, washers
TOTAL   6696.00 USD  
Aircraft standard tools See SB See Note Reamers Set T ool
Components See SB See Note Nut, bolt, Pin-cotter
NOTE: Price information to be obtained from the given supplier.
CONF 004
(1) Replacement of the Fasteners on the Rear Spar and the Front Spar
(a) T ask set A350-A-57-XX-P069-01000-93AA-A Replacement of the Fasteners on the
Rear Spar and the Front Spar
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET QTYPER A/C PRICE PER A/C MAIN PARTS
Part kit 57P069A02R01 2 6440.00 USD Bolts, caps, nuts, washers
Part kit 57P069A04R04 2 256.00 USD Bolts, caps, nuts, washers
TOTAL   6696.00 USD  
Aircraft standard tools See SB See Note Reamers Set T ool
Components See SB See Note Nut, bolt, Pin-cotter
NOTE: Price information to be obtained from the given supplier.
CONF ALL
F. APPLICABILITY
This Service Bulletin is applicable to this (these) operator(s):
AAR AFL AFR BAW CAL CCA CES CPA CSC CSN DAL DLH EDW ETD ETH EVE FBU FIN FJI FWI
GAF HVN IBE ITY JAL KAY MAS MAU PAL QTR SAS SIA THA THY VIR WFL
G. CONCURRENT REQUIREMENTS
None
H. NATURE OF THE WORK
CONF 001
(1) Replacement of the Fasteners on the Rear Spar and the Front Spar
(a) T ask set A350-A-57-XX-P069-01000-93AA-A Replacement of the Fasteners on the
Rear Spar and the Front Spar
AIRCRAFT YES
EQUIPMENT NO
CONF 002

### Page 16

A350
SERVICE BULLETIN
SUMMARY
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 16
(1) Replacement of the Fasteners on the Rear Spar and the Front Spar
(a) T ask set A350-A-57-XX-P069-01000-93AA-A Replacement of the Fasteners on the
Rear Spar and the Front Spar
AIRCRAFT YES
EQUIPMENT NO
CONF 003
(1) Replacement of the Fasteners on the Rear Spar and the Front Spar
(a) T ask set A350-A-57-XX-P069-01000-93AA-A Replacement of the Fasteners on the
Rear Spar and the Front Spar
AIRCRAFT YES
EQUIPMENT NO
CONF 004
(1) Replacement of the Fasteners on the Rear Spar and the Front Spar
(a) T ask set A350-A-57-XX-P069-01000-93AA-A Replacement of the Fasteners on the
Rear Spar and the Front Spar
AIRCRAFT YES
EQUIPMENT NO
CONF ALL
I. MANPOWER
CONF 001
(1) Replacement of the Fasteners on the Rear Spar and the Front Spar
(a) T ask set A350-A-57-XX-P069-01000-93AA-A Replacement of the Fasteners on the
Rear Spar and the Front Spar
MANPOWER
TOTAL MAN-HOURS 82.25 h
ELAPSED TIME (HOURS) 17.00 h
CONF 002
(1) Replacement of the Fasteners on the Rear Spar and the Front Spar
(a) T ask set A350-A-57-XX-P069-01000-93AA-A Replacement of the Fasteners on the
Rear Spar and the Front Spar
MANPOWER
TOTAL MAN-HOURS 82.75 h
ELAPSED TIME (HOURS) 17.00 h
CONF 003
(1) Replacement of the Fasteners on the Rear Spar and the Front Spar
(a) T ask set A350-A-57-XX-P069-01000-93AA-A Replacement of the Fasteners on the
Rear Spar and the Front Spar
MANPOWER
TOTAL MAN-HOURS 82.25 h

### Page 17

A350
SERVICE BULLETIN
SUMMARY
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 17
MANPOWER
ELAPSED TIME (HOURS) 17.00 h
CONF 004
(1) Replacement of the Fasteners on the Rear Spar and the Front Spar
(a) T ask set A350-A-57-XX-P069-01000-93AA-A Replacement of the Fasteners on the
Rear Spar and the Front Spar
MANPOWER
TOTAL MAN-HOURS 82.25 h
ELAPSED TIME (HOURS) 17.00 h

### Page 18

A350
SERVICE BULLETIN
SUMMARY
Figure ICN-A350-A-57XXP069-A-FAPE3-064VJ-A-001-01 Fig.SA Sol.AA SHEET 1/2
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24
General Overview
Page 18
CONF ALL
J. GENERAL OVERVIEW
CONF ALL
A
Z140
FR46
FR47
FR48
FR49
FR50
FR51
FR52
FR53
FR54
A
B
C
ICN-A350-A-57XXP069-A-FAPE3-064VJ-A-001-01

### Page 19

A350
SERVICE BULLETIN
SUMMARY
Figure ICN-A350-A-57XXP069-A-FAPE3-064VK-A-001-01 Fig.SA Sol.AA SHEET 2/2
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24
General Overview
Page 19
CONF ALL
B
C
VIEW LOOKING AFT
VIEW LOOKING FWD
NOTE:
FASTENERS TO BE REPLACED.
RIB1 LH
FR46
RIB1 RH
FR54
RIB1 RHRIB1 LH
ICN-A350-A-57XXP069-A-FAPE3-064VK-A-001-01

### Page 20

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 20
ATA SYSTEM: 57
TITLE: WINGS - CENTER WING - FASTENERS REPLACEMENT IN THE CENTER
WING BOX AT THE REAR SPAR AND THE FRONT SPAR LOWER AREA
1. PLANNING INFORMATION
A. APPLICABILITY
NOTE: This modification No. 116374L27002 is applicable by Service Bulletin only. The
intent of this modification is achieved in production on aircraft:
- A350-941 aircraft with Manufacturer Serial Number (MSN) 0270, 0283, 0453,
0457, 0459, 0463, 0466, 0471, 0483, 0485 thru 0487, 0493 thru 0496, 0498,
0504 thru 0516, 0520, 0525 thru 0530, 0534, 0537 and subsequent.
- A350-1041 aircraft with MSN 0409, 0430, 0438 thru 0444, 0450 thru 0477,
0486 thru 0521, 0533, 0539 and subsequent
through modification No. 116348L26999.
NOTE: This modification No. 116559L27019 is embodied before delivery on:
- A350-941 aircraft with Manufacturer Serial Number (MSN) 0270, 0283, 0453,
0457, 0459, 0463, 0466, 0471, 0483, 0485 thru 0487, 0493 thru 0496, 0498,
0504 thru 0516, 0520, 0525 thru 0530, 0534, 0537 and subsequent.
- A350-1041 aircraft with MSN 0409, 0430, 0438 thru 0444, 0450 thru 0477,
0486 thru 0521, 0533, 0539 and subsequent.
NOTE: This modification No. 116810L27029 is embodied before delivery on:
- A350-941 aircraft with Manufacturer Serial Number (MSN) 0270, 0283, 0453,
0457, 0459, 0463, 0466, 0471, 0483, 0485 thru 0487, 0493, 0505 thru 0506,
0510, 0516, 0520, 0526 thru 0528, 0530, 0537 thru 0538, 0541 thru 0545,
0550 and subsequent.
(1) Models
ON A/C 0065, 0071, 0088, 0102, 0110, 0118, 0125, 0141, 0161, 0169, 0188, 0206, 0215,
0225, 0229, 0233, 0241, 0252, 0258, 0262, 0266, 0274, 0286, 0290, 0296, 0298, 0306,
0315, 0319, 0326, 0330, 0332, 0336, 0340, 0342, 0346, 0350, 0356, 0362, 0368, 0372,
0374, 0380, 0382, 0386, 0388, 0399, 0402, 0415, 0420, 0424, 0426, 0432, 0434, 0446, 0482
350-1041
ON A/C 0005-0058, 0060-0064, 0066-0070, 0072-0087, 0089-0101, 0103-0107, 0109, 0111-
0117, 0119-0124, 0126-0130, 0132-0138, 0140, 0142-0151, 0153-0155, 0157-0160, 0162-
0165, 0167, 0168, 0170, 0172-0187, 0189-0193, 0195-0205, 0207-0214, 0216-0221, 0223,
0224, 0226-0228, 0230-0232, 0234-0240, 0243-0251, 0254-0257, 0259-0261, 0263-0265,
0267-0269, 0271-0273, 0276-0282, 0284, 0285, 0287, 0289, 0291-0295, 0297, 0299-0303,
0305, 0307-0314, 0316, 0318, 0320-0325, 0327-0329, 0331, 0333-0335, 0337-0339, 0341,
0343-0345, 0347-0349, 0351, 0352, 0354, 0355, 0357-0359, 0363-0366, 0369-0371, 0373,
0375, 0376, 0378, 0379, 0381, 0383, 0385, 0387, 0389-0398, 0400, 0401, 0403-0408, 0410-
0414, 0416-0419, 0421-0423, 0425, 0427-0429, 0431, 0433, 0435-0437, 0439, 0441-0443,
0445, 0447-0449, 0451, 0452, 0454, 0455, 0458, 0462, 0464, 0465, 0468-0470, 0472, 0474-
0476, 0478, 0479, 0481, 0484, 0488, 0489, 0491, 0497, 0499, 0500, 0502, 0517, 0524,
0531, 0535, 0536
350-941
CONF ALL
(2) Applicability by MSN
0005-0058 0060-0107 0109-0130 0132-0138 0140-0151 0153-0155 0157-0165 0167-
0170 0172-0193 0195-0221 0223-0241 0243-0252 0254-0269 0271-0274 0276-0282
0284-0287 0289-0303 0305-0316 0318-0352 0354-0359 0362-0366 0368-0376 0378-

### Page 21

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 21
0383 0385-0408 0410-0429 0431-0437 0439 0441-0443 0445-0449 0451 0452 0454
0455 0458 0462 0464 0465 0468-0470 0472 0474-0476 0478 0479 0481 0482 0484
0488 0489 0491 0497 0499 0500 0502 0517 0524 0531 0535 0536
(3) MSN by configuration
CONF 001
MSN CONFIGURATION
0005 0006 0007 0008 0009 0010 0011 0012 0013 0014 0015
0016 0017 0018 0019 0020 0021 0022 0023 0024 0025 0026
0027 0028 0029 0030 0031 0032 0033 0034 0035 0036 0037
0038 0039 0040 0041 0042 0043 0044 0045 0046 0047 0048
0049 0050 0051 0052 0053 0054 0055 0056 0057 0058 0060
0061 0062 0063 0064 0066 0067 0068 0069 0070 0072 0073
0074 0075 0076 0077 0078 0079 0080 0081 0082 0083 0084
0085 0086 0087 0089 0090 0091 0092 0093 0094 0095 0096
0097 0098 0099 0100 0101 0103 0104 0105 0106 0107 0109
0111 0112 0113 0114 0115 0116 0117 0119 0120 0121 0122
0123 0124 0126 0127 0128 0129 0130 0132 0133 0134 0135
0136 0137 0138 0140 0142 0143 0144 0145 0146 0147 0148
0149 0150 0151 0153 0154 0155 0157 0158 0159 0160 0162
0163 0164 0165 0167 0168 0170 0172 0173 0174 0175 0176
0177 0178 0179 0180 0181 0182 0183 0184 0185 0186 0187
0189 0190 0191 0192 0193 0195 0196 0197 0198 0199 0200
0201 0202 0203 0204 0205 0207 0208 0209 0210 0211 0212
0213 0214 0216 0217 0218 0219 0220 0221 0223 0224 0226
0227 0228 0230 0231 0232 0234 0235 0236 0237 0238 0239
0240 0243 0244 0245 0246 0247 0248 0249 0250 0251 0254
0255 0256 0257 0259 0260 0261 0263 0264 0265 0267 0268
0269 0271 0272 0273 0276 0277 0278 0279 0280 0281 0282
0284 0285 0287 0289 0291 0292 0293 0294 0295 0297 0299
0300 0301 0302 0303 0305 0307 0308 0309 0310 0311 0312
0313 0314
001
CONF 002
MSN CONFIGURATION
0065 0071 0088 0102 0110 0118 0125 0141 0161 0169 0188
0206 0215 0225 0229 0233 0241 0252 0258 0262 0266 0274
0286 0290 0296 0298 0306 0315 0319 0326 0330 0332 0336
0340 0342 0346 0350 0356 0362 0368 0372 0374 0380 0382
0386 0388 0399 0402 0415 0420 0424 0426 0432 0434 0446
0482
002
CONF 003
MSN CONFIGURATION
0316 0318 0320 0321 0322 0323 0324 0325 0327 0328 0329
0331 0333 0334 0335 0337 0338 0339 0341 0343 0344 0345
0347 0348 0349 0351 0352 0354 0355 0357 0358 0359 0363
0364 0365 0366 0369 0370 0371 0373 0375 0376 0378 0379
0381 0383 0385 0387 0389 0390 0391 0392 0393 0394 0395
0396 0397 0398 0400 0401 0403 0404 0405 0406 0407
003
CONF 004

### Page 22

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 22
MSN CONFIGURATION
0408 0410 0411 0412 0413 0414 0416 0417 0418 0419 0421
0422 0423 0425 0427 0428 0429 0431 0433 0435 0436 0437
0439 0441 0442 0443 0445 0447 0448 0449 0451 0452 0454
0455 0458 0462 0464 0465 0468 0469 0470 0472 0474 0475
0476 0478 0479 0481 0484 0488 0489 0491 0497 0499 0500
0502 0517 0524 0531 0535 0536
004
CONF ALL
(4) Configuration definition
CONF 001
Configuration 001
CONF 001 is applicable for aircraft on which:
- MOD No. 111537L26447 is not embodied,
- MOD No. 114062L26838 is not embodied.
CONF 001 retrofits following modifications: 116374L27002, 116559L27019,
116810L27029.
CONF 002
Configuration 002
CONF 002 is applicable for A350-1041 aircraft only.
CONF 002 retrofits following modifications: 116374L27002, 116559L27019.
CONF 003
Configuration 003
CONF 003 is applicable for aircraft on which:
- MOD No. 111537L26447 is embodied,
- MOD No. 114062L26838 is not embodied.
CONF 003 retrofits following modifications: 116374L27002, 116559L27019,
116810L27029.
CONF 004
Configuration 004
CONF 004 is applicable for aircraft on which:
- MOD No. 111537L26447 is embodied,
- MOD No. 114062L26838 is embodied.
CONF 004 retrofits following modifications: 116374L27002, 116559L27019,
116810L27029.
CONF ALL
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
It has been identified by in service experience that some fasteners may rotate inside
their fastener holes of the Center Wing Box (CWB) at front and rear spar area. This

### Page 23

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 23
rotation can cause a crack on the fastener head and nut sealant cover, this generate a
risk of voltage sparking and out gassing in case of lighting strike.
(2) Objective/Action
This Service Bulletin details the replacement of fasteners and introduce additional
head nut cap protection at front and rear spar in the CWB.
(3) Advantages
Accomplishment of this Service Bulletin will ensure the tightness and lightning
requirement adherence of the CWB fasteners and prevent voltage sparking and out
gassing in case of lighting strike.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
T o accomplish this Service Bulletin it is necessary to:
(1) Replacement of the Fasteners on the Rear Spar and the Front Spar
(a) T ask set A350-A-57-XX-P069-01000-93AA-A Replacement of the Fasteners on the
Rear Spar and the Front Spar
CONF 001 003
1 Replace the Fasteners on the Front Spar, LH Side
CONF 004
1 Replace the Fasteners on the Front Spar, LH Side
CONF 002
1 Replace the Fasteners on the Front Spar, LH Side
CONF 001
2 Replace the Fasteners on the Rear Spar, LH Side
CONF 003 004
2 Replace the Fasteners on the Rear Spar, LH Side
CONF 002
2 Replace the Fasteners on the Rear Spar, LH Side
CONF 001 003
3 Replace the Fasteners on the Front Spar, RH Side
CONF 004
3 Replace the Fasteners on the Front Spar, RH Side
CONF 002
3 Replace the Fasteners on the Front Spar, RH Side
CONF 001
4 Replace the Fasteners on the Rear Spar, RH Side
CONF 003 004
4 Replace the Fasteners on the Rear Spar, RH Side
CONF 002
4 Replace the Fasteners on the Rear Spar, RH Side
CONF ALL
5 On Bench, Prepare the Sealant Nozzle
CONF 001 003 004
6 On Bench, Ream the Fittings

### Page 24

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 24
CONF 002
6 On Bench, Ream the Fittings
CONF ALL
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
This Service Bulletin has been classified Mandatory by the issue of an Airworthiness
Directive (AD) published by the European Union Aviation Safety Agency (EASA). The
AD must be used as the reference document for the mandated accomplishment
timescale.
F. APPROVAL
The technical content of this document is approved under the authority of the Design
Organisation Approval ref. EASA.21J.031.
If an aircraft listed in the applicability has a modification or repair embodied that is not
of AIRBUS origin, and which affects the content of this Service Bulletin, the operator
is responsible for obtaining approval by its airworthiness authority for any adaptation
necessary before incorporation of the Service Bulletin.
G. MANPOWER
CONF 001
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Replacement of the Fasteners on the Rear Spar and the Front Spar
(a) T ask set A350-A-57-XX-P069-01000-93AA-A Replacement of the Fasteners on the
Rear Spar and the Front Spar
PREPARATION
General Job Set-Up 7.00 h
Job Set-Up on the Front Spar, LH Side 2.00 h
Job Set-Up on the Rear Spar, LH Side 1.00 h
Job Set-Up on the Front Spar, RH Side 2.00 h
Job Set-Up on the Rear Spar, RH Side 4.00 h
PROCEDURE
Replace the Fasteners on the Front Spar, LH Side 11.00 h
Replace the Fasteners on the Rear Spar, LH Side 16.00 h
Replace the Fasteners on the Front Spar, RH Side 11.00 h
Replace the Fasteners on the Rear Spar, RH Side 16.00 h
On Bench, Prepare the Sealant Nozzle 0.25 h BENCH
On Bench, Ream the Fittings 0.50 h BENCH
PREPARATION FOR TEST
None

### Page 25

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 25
TEST
T esting 0.50 h
CLOSE-UP
Close-Up on the Rear Spar, LH Side 1.00 h
Close-Up on the Front Spar, LH Side 2.00 h
Close-Up on the Rear Spar, RH Side 4.00 h
Close-Up on the Front Spar, RH Side 2.00 h
General Close-Up 2.00 h
TOTAL MAN-HOURS 82.25 h
ELAPSED TIME (HOURS) 17.00 h
NOTE: For an explanation of the man-hours and elapsed time, refer to the
Gantt Chart given in Appendix Manpower Gantt Chart.
CONF 002
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Replacement of the Fasteners on the Rear Spar and the Front Spar
(a) T ask set A350-A-57-XX-P069-01000-93AA-A Replacement of the Fasteners on the
Rear Spar and the Front Spar
PREPARATION
General Job Set-Up 7.00 h
Job Set-Up on the Front Spar, LH Side 2.00 h
Job Set-Up on the Rear Spar, LH Side 1.00 h
Job Set-Up on the Front Spar, RH Side 2.00 h
Job Set-Up on the Rear Spar, RH Side 4.00 h
PROCEDURE
Replace the Fasteners on the Front Spar, LH Side 11.00 h
Replace the Fasteners on the Rear Spar, LH Side 16.00 h
Replace the Fasteners on the Front Spar, RH Side 11.00 h
Replace the Fasteners on the Rear Spar, RH Side 16.00 h
On Bench, Prepare the Sealant Nozzle 0.25 h BENCH
On Bench, Ream the Fittings 1.00 h BENCH
PREPARATION FOR TEST
None
TEST
T esting 0.50 h
CLOSE-UP
Close-Up on the Rear Spar, LH Side 1.00 h
Close-Up on the Front Spar, LH Side 2.00 h
Close-Up on the Rear Spar, RH side 4.00 h

### Page 26

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 26
Close-Up on the Front Spar, RH Side 2.00 h
General Close-Up 2.00 h
TOTAL MAN-HOURS 82.75 h
ELAPSED TIME (HOURS) 17.00 h
NOTE: For an explanation of the man-hours and elapsed time, refer to the
Gantt Chart given in Appendix Manpower Gantt Chart.
CONF 003
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Replacement of the Fasteners on the Rear Spar and the Front Spar
(a) T ask set A350-A-57-XX-P069-01000-93AA-A Replacement of the Fasteners on the
Rear Spar and the Front Spar
PREPARATION
General Job Set-Up 7.00 h
Job Set-Up on the Front Spar, LH Side 2.00 h
Job Set-Up on the Rear Spar, LH Side 1.00 h
Job Set-Up on the Front Spar, RH Side 2.00 h
Job Set-Up on the Rear Spar, RH Side 4.00 h
PROCEDURE
Replace the Fasteners on the Front Spar, LH Side 11.00 h
Replace the Fasteners on the Rear Spar, LH Side 16.00 h
Replace the Fasteners on the Front Spar, RH Side 11.00 h
Replace the Fasteners on the Rear Spar, RH Side 16.00 h
On Bench, Prepare the Sealant Nozzle 0.25 h BENCH
On Bench, Ream the Fittings 0.50 h BENCH
PREPARATION FOR TEST
None
TEST
T esting 0.50 h
CLOSE-UP
Close-Up on the Rear Spar, LH Side 1.00 h
Close-Up on the Front Spar, LH Side 2.00 h
Close-Up on the Rear Spar, RH Side 4.00 h
Close-Up on the Front Spar, RH Side 2.00 h
General Close-Up 2.00 h
TOTAL MAN-HOURS 82.25 h
ELAPSED TIME (HOURS) 17.00 h
NOTE: For an explanation of the man-hours and elapsed time, refer to the
Gantt Chart given in Appendix Manpower Gantt Chart.

### Page 27

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 27
CONF 004
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Replacement of the Fasteners on the Rear Spar and the Front Spar
(a) T ask set A350-A-57-XX-P069-01000-93AA-A Replacement of the Fasteners on the
Rear Spar and the Front Spar
PREPARATION
General Job Set-Up 7.00 h
Job Set-Up on the Front Spar, LH Side 2.00 h
Job Set-Up on the Rear Spar, LH Side 1.00 h
Job Set-Up on the Front Spar, RH Side 2.00 h
Job Set-Up on the Rear Spar, RH Side 4.00 h
PROCEDURE
Replace the Fasteners on the Front Spar, LH Side 11.00 h
Replace the Fasteners on the Rear Spar, LH Side 16.00 h
Replace the Fasteners on the Front Spar, RH Side 11.00 h
Replace the Fasteners on the Rear Spar, RH Side 16.00 h
On Bench, Prepare the Sealant Nozzle 0.25 h BENCH
On Bench, Ream the Fittings 0.50 h BENCH
PREPARATION FOR TEST
None
TEST
T esting 0.50 h
CLOSE-UP
Close-Up on the Rear Spar, LH Side 1.00 h
Close-Up on the Front Spar, LH Side 2.00 h
Close-Up on the Rear Spar, RH Side 4.00 h
Close-Up on the Front Spar, RH Side 2.00 h
General Close-Up 2.00 h
TOTAL MAN-HOURS 82.25 h
ELAPSED TIME (HOURS) 17.00 h
NOTE: For an explanation of the man-hours and elapsed time, refer to the
Gantt Chart given in Appendix Manpower Gantt Chart.
CONF ALL
H. WEIGHT AND BALANCE
The weight and balance estimates given in this Service Bulletin are based on the
Manufacturer's Empty Weight (MEW) and do not include operator's items. The definition of
MEW and operator's items is given in the Weight and Balance Manual (WBM), Ref. WBM.
For the Modification No. 116559L27019:

### Page 28

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 28
FOR ALL SERIES
Manufacturer's Empty Weight +0.067 kg (+0.148 lb)
Effect on Balance +2.046 kg.m (+14.799 lb.ft)
I. ELECTRICAL LOAD DATA
Not changed
J. REFERENCES
CONF 001
(1) Replacement of the Fasteners on the Rear Spar and the Front Spar
(a) T ask set A350-A-57-XX-P069-01000-93AA-A Replacement of the Fasteners on the
Rear Spar and the Front Spar
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-24-XX-01ZZZ-667Z-A A350-A-51-42-XX-01ZZZ-667Z-A
A350-A-51-43-XX-01ZZZ-667Z-A A350-A-51-44-11-01ZZZ-667Z-A
A350-A-51-44-21-01ZZZ-667Z-A A350-A-51-75-12-00ZZZ-660Z-A
A350-A-51-76-12-00ZZZ-660Z-A
CONSUMABLE MATERIAL LIST (CML)
See manual
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP)
A350-A-20-51-20-00ZZZ-25BZ-A
A350-A-20-51-20-01ZZZ-25BZ-A
A350-A-20-51-20-04ZZZ-264Z-A
A350-A-20-51-20-09ZZZ-34BZ-A
A350-A-20-51-50-01ZZZ-25BZ-A
A350-A-20-51-61-00ZZZ-25BZ-A
A350-A-20-51-61-05ZZZ-25BZ-A
A350-A-24-41-XX-00ZZZ-170Z-A
A350-A-28-11-XX-00ZZZ-270Z-A
A350-A-28-11-XX-03ZZZ-270Z-A
A350-A-29-XX-XX-02ZZZ-170Z-A
A350-A-29-XX-XX-04ZZZ-562Z-A
A350-A-29-XX-XX-04ZZZ-762Z-A
A350-A-51-76-12-00ZZZ-660Z-A A350-A-53-35-75-0YZZZ-520Z-A
A350-A-53-35-75-0YZZZ-720Z-A
A350-A-53-35-75-0ZZZZ-520Z-A
A350-A-53-35-75-0ZZZZ-720Z-A
A350-A-57-11-65-00ZZZ-310Z-A A350-A-57-17-71-00ZZZ-520Z-A
A350-A-57-17-71-00ZZZ-720Z-A

### Page 29

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 29
NON DESTRUCTIVE TEST (NDT)
A350-A-51-99-XX-01ZZZ-040Z-A
PROCESS AND MATERIAL SPECIFICATION (PMS)
01-04-45 01-04-58
SYSTEM DESCRIPTION (SD)
A350-A-06-2X-XX-01ZZZ-04CZ-A A350-A-06-3X-XX-01ZZZ-04CZ-A
A350-A-06-4X-XX-01ZZZ-04CZ-A A350-A-20-51-20-01ZZZ-04CZ-A
STANDARDS MANUAL (SM)
See manual
WEIGHT AND BALANCE MANUAL (WBM)
See manual
CONF 002
(1) Replacement of the Fasteners on the Rear Spar and the Front Spar
(a) T ask set A350-A-57-XX-P069-01000-93AA-A Replacement of the Fasteners on the
Rear Spar and the Front Spar
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-24-XX-01ZZZ-667Z-A A350-A-51-42-XX-01ZZZ-667Z-A
A350-A-51-43-XX-01ZZZ-667Z-A A350-A-51-44-11-01ZZZ-667Z-A
A350-A-51-44-21-01ZZZ-667Z-A A350-A-51-75-12-00ZZZ-660Z-A
A350-A-51-76-12-00ZZZ-660Z-A
CONSUMABLE MATERIAL LIST (CML)
See manual
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP)
A350-A-20-51-20-00ZZZ-25BZ-A
A350-A-20-51-20-01ZZZ-25BZ-A
A350-A-20-51-20-04ZZZ-264Z-A
A350-A-20-51-20-09ZZZ-34BZ-A
A350-A-20-51-50-01ZZZ-25BZ-A
A350-A-20-51-61-00ZZZ-25BZ-A
A350-A-20-51-61-05ZZZ-25BZ-A
A350-A-24-41-XX-00ZZZ-170Z-A
A350-A-28-11-XX-00ZZZ-270Z-A
A350-A-28-11-XX-03ZZZ-270Z-A
A350-A-29-XX-XX-02ZZZ-170Z-A
A350-A-29-XX-XX-04ZZZ-562Z-A
A350-A-29-XX-XX-04ZZZ-762Z-A

### Page 30

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 30
MAINTENANCE PROCEDURE (MP)
A350-A-51-76-12-00ZZZ-660Z-A A350-A-53-35-75-0YZZZ-520Z-A
A350-A-53-35-75-0YZZZ-720Z-A
A350-A-53-35-75-0ZZZZ-520Z-A
A350-A-53-35-75-0ZZZZ-720Z-A
A350-A-57-11-65-00ZZZ-310Z-A A350-A-57-17-71-00ZZZ-520Z-A
A350-A-57-17-71-00ZZZ-720Z-A
PROCESS AND MATERIAL SPECIFICATION (PMS)
01-04-45 01-04-58
SYSTEM DESCRIPTION (SD)
A350-A-06-2X-XX-01ZZZ-04CZ-A A350-A-06-3X-XX-01ZZZ-04CZ-A
A350-A-06-4X-XX-01ZZZ-04CZ-A
STANDARDS MANUAL (SM)
See manual
WEIGHT AND BALANCE MANUAL (WBM)
See manual
CONF 003
(1) Replacement of the Fasteners on the Rear Spar and the Front Spar
(a) T ask set A350-A-57-XX-P069-01000-93AA-A Replacement of the Fasteners on the
Rear Spar and the Front Spar
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-24-XX-01ZZZ-667Z-A A350-A-51-42-XX-01ZZZ-667Z-A
A350-A-51-43-XX-01ZZZ-667Z-A A350-A-51-44-11-01ZZZ-667Z-A
A350-A-51-44-21-01ZZZ-667Z-A A350-A-51-75-12-00ZZZ-660Z-A
A350-A-51-76-12-00ZZZ-660Z-A
CONSUMABLE MATERIAL LIST (CML)
See manual
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP)
A350-A-20-51-20-00ZZZ-25BZ-A
A350-A-20-51-20-01ZZZ-25BZ-A
A350-A-20-51-20-04ZZZ-264Z-A
A350-A-20-51-20-09ZZZ-34BZ-A
A350-A-20-51-50-01ZZZ-25BZ-A

### Page 31

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 31
MAINTENANCE PROCEDURE (MP)
A350-A-20-51-61-00ZZZ-25BZ-A
A350-A-20-51-61-05ZZZ-25BZ-A
A350-A-24-41-XX-00ZZZ-170Z-A
A350-A-28-11-XX-00ZZZ-270Z-A
A350-A-28-11-XX-03ZZZ-270Z-A
A350-A-29-XX-XX-02ZZZ-170Z-A
A350-A-29-XX-XX-04ZZZ-562Z-A
A350-A-29-XX-XX-04ZZZ-762Z-A
A350-A-51-76-12-00ZZZ-660Z-A A350-A-53-35-75-0YZZZ-520Z-A
A350-A-53-35-75-0YZZZ-720Z-A
A350-A-53-35-75-0ZZZZ-520Z-A
A350-A-53-35-75-0ZZZZ-720Z-A
A350-A-57-11-65-00ZZZ-310Z-A A350-A-57-17-71-00ZZZ-520Z-A
A350-A-57-17-71-00ZZZ-720Z-A
NON DESTRUCTIVE TEST (NDT)
A350-A-51-99-XX-01ZZZ-040Z-A
PROCESS AND MATERIAL SPECIFICATION (PMS)
01-04-45 01-04-58
SYSTEM DESCRIPTION (SD)
A350-A-06-2X-XX-01ZZZ-04CZ-A A350-A-06-3X-XX-01ZZZ-04CZ-A
A350-A-06-4X-XX-01ZZZ-04CZ-A A350-A-20-51-20-01ZZZ-04CZ-A
STANDARDS MANUAL (SM)
See manual
WEIGHT AND BALANCE MANUAL (WBM)
See manual
CONF 004
(1) Replacement of the Fasteners on the Rear Spar and the Front Spar
(a) T ask set A350-A-57-XX-P069-01000-93AA-A Replacement of the Fasteners on the
Rear Spar and the Front Spar
AIRCRAFT STRUCTURAL REPAIR (ASR)
A350-A-51-24-XX-01ZZZ-667Z-A A350-A-51-42-XX-01ZZZ-667Z-A
A350-A-51-43-XX-01ZZZ-667Z-A A350-A-51-44-11-01ZZZ-667Z-A
A350-A-51-44-21-01ZZZ-667Z-A A350-A-51-75-12-00ZZZ-660Z-A
A350-A-51-76-12-00ZZZ-660Z-A
CONSUMABLE MATERIAL LIST (CML)
See manual
ELECTRICAL STANDARD PRACTICES (ESP)
A350-A-20-55-XX-01ZZZ-042Z-A

### Page 32

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 32
INTRODUCTION (INTRO)
A350-A-00-61-04-11ZZZ-018Z-D
MAINTENANCE PROCEDURE (MP)
A350-A-20-51-20-00ZZZ-25BZ-A
A350-A-20-51-20-01ZZZ-25BZ-A
A350-A-20-51-20-04ZZZ-264Z-A
A350-A-20-51-20-09ZZZ-34BZ-A
A350-A-20-51-50-01ZZZ-25BZ-A
A350-A-20-51-61-00ZZZ-25BZ-A
A350-A-20-51-61-05ZZZ-25BZ-A
A350-A-24-41-XX-00ZZZ-170Z-A
A350-A-28-11-XX-00ZZZ-270Z-A
A350-A-28-11-XX-03ZZZ-270Z-A
A350-A-29-XX-XX-02ZZZ-170Z-A
A350-A-29-XX-XX-04ZZZ-562Z-A
A350-A-29-XX-XX-04ZZZ-762Z-A
A350-A-51-76-12-00ZZZ-660Z-A A350-A-53-35-75-0YZZZ-520Z-A
A350-A-53-35-75-0YZZZ-720Z-A
A350-A-53-35-75-0ZZZZ-520Z-A
A350-A-53-35-75-0ZZZZ-720Z-A
A350-A-57-11-65-00ZZZ-310Z-A A350-A-57-17-71-00ZZZ-520Z-A
A350-A-57-17-71-00ZZZ-720Z-A
NON DESTRUCTIVE TEST (NDT)
A350-A-51-99-XX-01ZZZ-040Z-A
PROCESS AND MATERIAL SPECIFICATION (PMS)
01-04-45 01-04-58
SYSTEM DESCRIPTION (SD)
A350-A-06-2X-XX-01ZZZ-04CZ-A A350-A-06-3X-XX-01ZZZ-04CZ-A
A350-A-06-4X-XX-01ZZZ-04CZ-A A350-A-20-51-20-01ZZZ-04CZ-A
STANDARDS MANUAL (SM)
See manual
WEIGHT AND BALANCE MANUAL (WBM)
See manual
CONF ALL
K. PUBLICATION AFFECTED
MAINTENANCE ILLUSTRATED PART DATA (MIPD)
See manual
L. INDUSTRY SUPPORT INFORMATION
AIRBUS will share the costs of accomplishment of this Service Bulletin by providing the kits
at no charge for orders placed before Mar 01/28 after the initial issue date of the Service
Bulletin.

### Page 33

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 33
For the accomplishment of this Service Bulletin before Mar 01/28 after the initial issue
date of the Service Bulletin, AIRBUS will share the costs by crediting the operator supplied
standard hardware parts. Claims for this allowance should be received no later than 90
days after completion of the last affected aircraft of your fleet fulfilling above timeframe
conditions.
For the accomplishment of this Service Bulletin before Mar 01/28, AIRBUS will credit the
man-hours indicated in this Service Bulletin at the agreed in-house warranty labor rate.
Claims for this allowance shall be received no later than 90 days after completion of the last
affected aircraft of your fleet fulfilling above timeframe conditions.
This Service Bulletin is the subject of an AIRBUS monitored retrofit campaign. For detailed
support, please refer to the related RIL.
For the organization of this retrofit, you are kindly requested to contact AIRBUS retrofit
management department: monitored.retrofit@airbus.com.

### Page 34

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 34
2. MATERIAL INFORMATION
A. MATERIAL APPLICABILITY
CONF 001
Material for task set A350-A-57-XX-P069-01000-93AA-A Replacement of the
Fasteners on the Rear Spar and the Front Spar
MATERIAL QTY SEE NOTES
Aircraft standard tools See SB
Referenced tools See SB
Consumables See SB
Referenced consumables See SB
Part kit 57P069A01R01 2
Part kit 57P069A04R04 2
Components See SB
Referenced parts See SB
CONF 002
Material for task set A350-A-57-XX-P069-01000-93AA-A Replacement of the
Fasteners on the Rear Spar and the Front Spar
MATERIAL QTY SEE NOTES
Aircraft standard tools See SB
Referenced tools See SB
Consumables See SB
Referenced consumables See SB
Part kit 57P069A03R02 2
Part kit 57P069A05R02 2
Components See SB
Referenced parts See SB
CONF 003
Material for task set A350-A-57-XX-P069-01000-93AA-A Replacement of the
Fasteners on the Rear Spar and the Front Spar
MATERIAL QTY SEE NOTES
Aircraft standard tools See SB
Referenced tools See SB
Consumables See SB
Referenced consumables See SB
Part kit 57P069A02R01 2
Part kit 57P069A04R04 2
Components See SB
Referenced parts See SB

### Page 35

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 35
CONF 004
Material for task set A350-A-57-XX-P069-01000-93AA-A Replacement of the
Fasteners on the Rear Spar and the Front Spar
MATERIAL QTY SEE NOTES
Aircraft standard tools See SB
Referenced tools See SB
Consumables See SB
Referenced consumables See SB
Part kit 57P069A02R01 2
Part kit 57P069A04R04 2
Components See SB
Referenced parts See SB
CONF ALL
B. TOOLING
CONF 001
Aircraft standard tools for task set A350-A-57-XX-P069-01000-93AA-A
Replacement of the Fasteners on the Rear Spar and the Front Spar
Procurement address D4296
AIRBUS Material, Logistics and Suppliers
Customer Order Fulfilment
Customer Order Fulfilment
Weg beim Jaeger 150
22335 HAMBURG
GERMANY
Phone: +49 (0) 40 50 76 40 02
E-mail: Please contact your Single Point Of Contact
(SPOC)
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
98V57103008000
(D4296) 1 REAMERS (1)
NOTE(S)
(1): The tool 98V57103008000 contents the following reamers:
- ST00231578 – 31278535, or equivalent
- ST00231576 – 31278533, or equivalent
- ST00231575 – 31278530, or equivalent
- ST00231577 – 31278542, or equivalent
CONF 002
Aircraft standard tools for task set A350-A-57-XX-P069-01000-93AA-A
Replacement of the Fasteners on the Rear Spar and the Front Spar
Procurement address D4296 AIRBUS Material, Logistics and Suppliers

### Page 36

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 36
Customer Order Fulfilment
Customer Order Fulfilment
Weg beim Jaeger 150
22335 HAMBURG
GERMANY
Phone: +49 (0) 40 50 76 40 02
E-mail: Please contact your Single Point Of Contact
(SPOC)
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
98V57103008000
(D4296) 1 REAMERS (1)
NOTE(S)
(1): The tool 98V57103008000 contents the following reamers:
- ST00231578 – 31278535, or equivalent
- ST00231576 – 31278533, or equivalent
- ST00231575 – 31278530, or equivalent
- ST00231577 – 31278542, or equivalent
CONF 003
Aircraft standard tools for task set A350-A-57-XX-P069-01000-93AA-A
Replacement of the Fasteners on the Rear Spar and the Front Spar
Procurement address D4296
AIRBUS Material, Logistics and Suppliers
Customer Order Fulfilment
Customer Order Fulfilment
Weg beim Jaeger 150
22335 HAMBURG
GERMANY
Phone: +49 (0) 40 50 76 40 02
E-mail: Please contact your Single Point Of Contact
(SPOC)
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
98V57103008000
(D4296) 1 REAMERS (1)
NOTE(S)
(1): The tool 98V57103008000 contents the following reamers:
- ST00231578 – 31278535, or equivalent
- ST00231576 – 31278533, or equivalent

### Page 37

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 37
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
- ST00231575 – 31278530, or equivalent
- ST00231577 – 31278542, or equivalent
CONF 004
Aircraft standard tools for task set A350-A-57-XX-P069-01000-93AA-A
Replacement of the Fasteners on the Rear Spar and the Front Spar
Procurement address D4296
AIRBUS Material, Logistics and Suppliers
Customer Order Fulfilment
Customer Order Fulfilment
Weg beim Jaeger 150
22335 HAMBURG
GERMANY
Phone: +49 (0) 40 50 76 40 02
E-mail: Please contact your Single Point Of Contact
(SPOC)
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
98V57103008000
(D4296) 1 REAMERS (1)
NOTE(S)
(1): The tool 98V57103008000 contents the following reamers:
- ST00231578 – 31278535, or equivalent
- ST00231576 – 31278533, or equivalent
- ST00231575 – 31278530, or equivalent
- ST00231577 – 31278542, or equivalent
CONF 001
Referenced tools for task set A350-A-57-XX-P069-01000-93AA-A Replacement of
the Fasteners on the Rear Spar and the Front Spar
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. MP A350-A-28-11-XX-03ZZZ-270Z-A
Ref. MP A350-A-53-35-75-0ZZZZ-520Z-A
Ref. MP A350-A-53-35-75-0ZZZZ-720Z-A
Ref. MP A350-A-57-17-71-00ZZZ-520Z-A
Ref. MP A350-A-57-17-71-00ZZZ-720Z-A
CONF 002
Referenced tools for task set A350-A-57-XX-P069-01000-93AA-A Replacement of
the Fasteners on the Rear Spar and the Front Spar
T o accomplish this Service Bulletin it is necessary to use the tools listed in:

### Page 38

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 38
Ref. MP A350-A-28-11-XX-03ZZZ-270Z-A
Ref. MP A350-A-53-35-75-0ZZZZ-520Z-A
Ref. MP A350-A-53-35-75-0ZZZZ-720Z-A
Ref. MP A350-A-57-17-71-00ZZZ-520Z-A
Ref. MP A350-A-57-17-71-00ZZZ-720Z-A
CONF 003
Referenced tools for task set A350-A-57-XX-P069-01000-93AA-A Replacement of
the Fasteners on the Rear Spar and the Front Spar
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. MP A350-A-28-11-XX-03ZZZ-270Z-A
Ref. MP A350-A-53-35-75-0ZZZZ-520Z-A
Ref. MP A350-A-53-35-75-0ZZZZ-720Z-A
Ref. MP A350-A-57-17-71-00ZZZ-520Z-A
Ref. MP A350-A-57-17-71-00ZZZ-720Z-A
CONF 004
Referenced tools for task set A350-A-57-XX-P069-01000-93AA-A Replacement of
the Fasteners on the Rear Spar and the Front Spar
T o accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. MP A350-A-28-11-XX-03ZZZ-270Z-A
Ref. MP A350-A-53-35-75-0ZZZZ-520Z-A
Ref. MP A350-A-53-35-75-0ZZZZ-720Z-A
Ref. MP A350-A-57-17-71-00ZZZ-520Z-A
Ref. MP A350-A-57-17-71-00ZZZ-720Z-A
CONF ALL
C. CONSUMABLES
CONF 001
Consumables for task set A350-A-57-XX-P069-01000-93AA-A Replacement of the
Fasteners on the Rear Spar and the Front Spar
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
04CMA2 Wash Primer - - - Structure
04DEB2
Primer Epoxy Paint -
TSA Anodizing Corrosion
Inhibiting Structure
04EAC2
Primer Polyurethane Paint
- - CorrosionInhibiting
Structure
04JAA3 T op Coat Polyurethane - - -External Structure
04QAC5
Coating - - Corrosion
Inhibiting Fastener Head
Protection

### Page 39

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 39
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
04TMB2 Varnish - - ElectricalBonding Structure
06AAC1 Polysulfide Sealant -General Purpose Interfay
06ABA1 Polysulfide Sealant - FuelT ank Brushable
06ACA1
Polysulfide Sealant - Low
Density MultiPurpose
Brushable
06ACC1
Polysulfide Sealant - Low
Density MultiPurpose
Interfay
06LDG2
Non Hardening Jointing
Putty - High T emp. Area -
Structure
08BAA9 Non Aqueous Cleaner -General
12ACB1
Corrosion Preventive
Compound - Heavy Duty
Hard Film
12AEB1
Corrosion Preventive
Compound - Heavy Duty
Long Durability Hard Film
14SBA1 T extile - Lint free Cotton
14SBB1 T extile - Lint free Fuel T ank
CONF 002
Consumables for task set A350-A-57-XX-P069-01000-93AA-A Replacement of the
Fasteners on the Rear Spar and the Front Spar
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
04DEB2
Primer Epoxy Paint -
TSA Anodizing Corrosion
Inhibiting Structure
04QAB2 Coating - - FlexibleStructure
04QAC5
Coating - - Corrosion
Inhibiting Fastener Head
Protection
04TMB2 Varnish - - ElectricalBonding Structure
06AAC1 Polysulfide Sealant -General Purpose Interfay
06ABA1 Polysulfide Sealant - FuelT ank Brushable
06ACA1
Polysulfide Sealant - Low
Density MultiPurpose
Brushable

### Page 40

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 40
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
06ACC1
Polysulfide Sealant - Low
Density MultiPurpose
Interfay
06LDG2
Non Hardening Jointing
Putty - High T emp. Area -
Structure
08BAA9 Non Aqueous Cleaner -General
12ACB1
Corrosion Preventive
Compound - Heavy Duty
Hard Film
12AEB1
Corrosion Preventive
Compound - Heavy Duty
Long Durability Hard Film
14SBA1 T extile - Lint free Cotton
14SBB1 T extile - Lint free Fuel T ank
CONF 003
Consumables for task set A350-A-57-XX-P069-01000-93AA-A Replacement of the
Fasteners on the Rear Spar and the Front Spar
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
04CMA2 Wash Primer - - - Structure
04DEB2
Primer Epoxy Paint -
TSA Anodizing Corrosion
Inhibiting Structure
04EAC2
Primer Polyurethane Paint
- - CorrosionInhibiting
Structure
04JAA3 T op Coat Polyurethane - - -External Structure
04QAC5
Coating - - Corrosion
Inhibiting Fastener Head
Protection
04TMB2 Varnish - - ElectricalBonding Structure
06AAC1 Polysulfide Sealant -General Purpose Interfay
06ABA1 Polysulfide Sealant - FuelT ank Brushable
06ACA1
Polysulfide Sealant - Low
Density MultiPurpose
Brushable
06ACC1
Polysulfide Sealant - Low
Density MultiPurpose
Interfay
06LDG2
Non Hardening Jointing
Putty - High T emp. Area -
Structure

### Page 41

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 41
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
08BAA9 Non Aqueous Cleaner -General
12ACB1
Corrosion Preventive
Compound - Heavy Duty
Hard Film
12AEB1
Corrosion Preventive
Compound - Heavy Duty
Long Durability Hard Film
14SBA1 T extile - Lint free Cotton
14SBB1 T extile - Lint free Fuel T ank
CONF 004
Consumables for task set A350-A-57-XX-P069-01000-93AA-A Replacement of the
Fasteners on the Rear Spar and the Front Spar
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
04CMA2 Wash Primer - - - Structure
04DEB2
Primer Epoxy Paint -
TSA Anodizing Corrosion
Inhibiting Structure
04EAC2
Primer Polyurethane Paint
- - CorrosionInhibiting
Structure
04JAA3 T op Coat Polyurethane - - -External Structure
04QAC5
Coating - - Corrosion
Inhibiting Fastener Head
Protection
04TMB2 Varnish - - ElectricalBonding Structure
06AAC1 Polysulfide Sealant -General Purpose Interfay
06ABA1 Polysulfide Sealant - FuelT ank Brushable
06ACA1
Polysulfide Sealant - Low
Density MultiPurpose
Brushable
06ACC1
Polysulfide Sealant - Low
Density MultiPurpose
Interfay
06LDG2
Non Hardening Jointing
Putty - High T emp. Area -
Structure
08BAA9 Non Aqueous Cleaner -General
12ACB1
Corrosion Preventive
Compound - Heavy Duty
Hard Film

### Page 42

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 42
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
12AEB1
Corrosion Preventive
Compound - Heavy Duty
Long Durability Hard Film
14SBA1 T extile - Lint free Cotton
14SBB1 T extile - Lint free Fuel T ank
CONF 001
Referenced consumables for task set A350-A-57-XX-P069-01000-93AA-A
Replacement of the Fasteners on the Rear Spar and the Front Spar
T o accomplish this Service Bulletin it is necessary to use the consumable materials listed in:
Ref. MP A350-A-20-51-20-04ZZZ-264Z-A
Ref. MP A350-A-20-51-20-00ZZZ-25BZ-A
Ref. MP A350-A-20-51-61-05ZZZ-25BZ-A
Ref. MP A350-A-51-76-12-00ZZZ-660Z-A
Ref. MP A350-A-53-35-75-0ZZZZ-720Z-A
Ref. MP A350-A-53-35-75-0YZZZ-720Z-A
Ref. MP A350-A-57-17-71-00ZZZ-720Z-A
CONF 002
Referenced consumables for task set A350-A-57-XX-P069-01000-93AA-A
Replacement of the Fasteners on the Rear Spar and the Front Spar
T o accomplish this Service Bulletin it is necessary to use the consumable materials listed in:
Ref. MP A350-A-20-51-20-04ZZZ-264Z-A
Ref. MP A350-A-20-51-20-00ZZZ-25BZ-A
Ref. MP A350-A-20-51-61-05ZZZ-25BZ-A
Ref. MP A350-A-51-76-12-00ZZZ-660Z-A
Ref. MP A350-A-53-35-75-0ZZZZ-720Z-A
Ref. MP A350-A-53-35-75-0YZZZ-720Z-A
Ref. MP A350-A-57-17-71-00ZZZ-720Z-A
CONF 003
Referenced consumables for task set A350-A-57-XX-P069-01000-93AA-A
Replacement of the Fasteners on the Rear Spar and the Front Spar
T o accomplish this Service Bulletin it is necessary to use the consumable materials listed in:
Ref. MP A350-A-20-51-20-04ZZZ-264Z-A
Ref. MP A350-A-20-51-20-00ZZZ-25BZ-A
Ref. MP A350-A-20-51-61-05ZZZ-25BZ-A
Ref. MP A350-A-51-76-12-00ZZZ-660Z-A
Ref. MP A350-A-53-35-75-0ZZZZ-720Z-A
Ref. MP A350-A-53-35-75-0YZZZ-720Z-A
Ref. MP A350-A-57-17-71-00ZZZ-720Z-A

### Page 43

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 43
CONF 004
Referenced consumables for task set A350-A-57-XX-P069-01000-93AA-A
Replacement of the Fasteners on the Rear Spar and the Front Spar
T o accomplish this Service Bulletin it is necessary to use the consumable materials listed in:
Ref. MP A350-A-20-51-20-04ZZZ-264Z-A
Ref. MP A350-A-20-51-20-00ZZZ-25BZ-A
Ref. MP A350-A-20-51-61-05ZZZ-25BZ-A
Ref. MP A350-A-51-76-12-00ZZZ-660Z-A
Ref. MP A350-A-53-35-75-0ZZZZ-720Z-A
Ref. MP A350-A-53-35-75-0YZZZ-720Z-A
Ref. MP A350-A-57-17-71-00ZZZ-720Z-A
CONF ALL
D. LIST OF NEW PARTS
CONF 001
Part kit 57P069A01R01
Cost 8730.00 USD
Availability 240 d (calendar days from receipt of order)
NOTE(S)
The sales terms (costs and availability) are estimated in relation to economic
conditions. The latest valid price and lead time for ordering purposes shall be
obtained through the AIRBUS Spares portal or through a request for quotation to
airbus.kit@airbus.com.
The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning
schedule with your order so that we can try to comply with your requirements.
Procurement address D4296
AIRBUS
Material, Logistics and Suppliers ATP II B,
Hein-Sass-Weg 24
21129 HAMBURG
GERMANY
Phone: +49 40 743 51775
E-mail: airbus.kit@airbus.com
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
30 EN6115M7-16 2 BOLT
31 EN6115M7-17 2 BOLT
39 EN6115V8X24 2 BOLT
41 EN6115V8X27 6 BOLT
43 ABS1758E0732V 4 WASHER
45 ASNA2531-8 8 NUT

### Page 44

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 44
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
46 ASNA2536-7 4 NUT
47 ABS1846A7B 6 CAP
NOTE(S)
Refer to the AIRBUS Ref. SM if you find part numbers of hardware components which
you cannot identify. The SM will give you the correct part number to part number
relationship.
CONF 003 004
Part kit 57P069A02R01
Cost 3220.00 USD
Availability 230 d (calendar days from receipt of order)
NOTE(S)
The sales terms (costs and availability) are estimated in relation to economic
conditions. The latest valid price and lead time for ordering purposes shall be
obtained through the AIRBUS Spares portal or through a request for quotation to
airbus.kit@airbus.com.
The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning
schedule with your order so that we can try to comply with your requirements.
Procurement address D4296
AIRBUS
Material, Logistics and Suppliers ATP II B,
Hein-Sass-Weg 24
21129 HAMBURG
GERMANY
Phone: +49 40 743 51775
E-mail: airbus.kit@airbus.com
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
30 EN6115M7-16 2 BOLT
31 EN6115M7-17 2 BOLT
38 EN6115V8X22 2 BOLT
40 EN6115V8X26 6 BOLT
43 ABS1758E0732V 4 WASHER
45 ASNA2531-8 8 NUT
46 ASNA2536-7 4 NUT
47 ABS1846A7B 6 CAP
NOTE(S)
Refer to the AIRBUS Ref. SM if you find part numbers of hardware components which
you cannot identify. The SM will give you the correct part number to part number
relationship.

### Page 45

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 45
CONF 002
Part kit 57P069A03R02
Cost 3220.00 USD
Availability 240 d (calendar days from receipt of order)
NOTE(S)
The sales terms (costs and availability) are estimated in relation to economic
conditions. The latest valid price and lead time for ordering purposes shall be
obtained through the AIRBUS Spares portal or through a request for quotation to
airbus.kit@airbus.com.
The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning
schedule with your order so that we can try to comply with your requirements.
Procurement address D4296
AIRBUS
Material, Logistics and Suppliers ATP II B,
Hein-Sass-Weg 24
21129 HAMBURG
GERMANY
Phone: +49 40 743 51775
E-mail: airbus.kit@airbus.com
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
32 EN6115M7-18 4 BOLT
36 EN6115V8X25 2 BOLT
38 EN6115V8X22 2 BOLT
40 EN6115V8X26 4 BOLT
43 ABS1758E0732V 4 WASHER
45 ASNA2531-8 8 NUT
46 ASNA2536-7 4 NUT
47 ABS1846A7B 6 CAP
NOTE(S)
Refer to the AIRBUS Ref. SM if you find part numbers of hardware components which
you cannot identify. The SM will give you the correct part number to part number
relationship.
CONF 001 003 004
Part kit 57P069A04R04
Cost 128.00 USD
Availability 240 d (calendar days from receipt of order)
NOTE(S)
The sales terms (costs and availability) are estimated in relation to economic
conditions. The latest valid price and lead time for ordering purposes shall be

### Page 46

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 46
obtained through the AIRBUS Spares portal or through a request for quotation to
airbus.kit@airbus.com.
The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning
schedule with your order so that we can try to comply with your requirements.
Procurement address D4296
AIRBUS
Material, Logistics and Suppliers ATP II B,
Hein-Sass-Weg 24
21129 HAMBURG
GERMANY
Phone: +49 40 743 51775
E-mail: airbus.kit@airbus.com
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
33 EN6115V7-21 2 BOLT
34 EN6115V7-22 2 BOLT
42 ABS1852BB7 4 WASHER
44 ASNA2531-7 4 NUT
48 ABS1854A7P 4 CAP
NOTE(S)
Refer to the AIRBUS Ref. SM if you find part numbers of hardware components which
you cannot identify. The SM will give you the correct part number to part number
relationship.
CONF 002
Part kit 57P069A05R02
Cost 123.00 USD
Availability 240 d (calendar days from receipt of order)
NOTE(S)
The sales terms (costs and availability) are estimated in relation to economic
conditions. The latest valid price and lead time for ordering purposes shall be
obtained through the AIRBUS Spares portal or through a request for quotation to
airbus.kit@airbus.com.
The availability given above is the standard lead time from the date of your purchase
order. If items are required before this time, please include a retrofit planning
schedule with your order so that we can try to comply with your requirements.
Procurement address D4296
AIRBUS
Material, Logistics and Suppliers ATP II B,
Hein-Sass-Weg 24
21129 HAMBURG
GERMANY
Phone: +49 40 743 51775
E-mail: airbus.kit@airbus.com
Internet: http://spares.airbus.com

### Page 47

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 47
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
34 EN6115V7-22 4 BOLT
42 ABS1852BB7 4 WASHER
44 ASNA2531-7 4 NUT
48 ABS1854A7P 4 CAP
NOTE(S)
Refer to the AIRBUS Ref. SM if you find part numbers of hardware components which
you cannot identify. The SM will give you the correct part number to part number
relationship.
CONF 001
Components for task set A350-A-57-XX-P069-01000-93AA-A Replacement of the
Fasteners on the Rear Spar and the Front Spar
Procurement address D4296
AIRBUS Material, Logistics and Suppliers Standard
Parts
Customer Order Fulfilment
Phone: +49 (0) 40 50 76 40 02
E-mail: Please contact your Single Point Of Contact
(SPOC)
Internet: http://spares.airbus.com or via SPEC2000
NOTE(S)
For standard hardware the purchase order must be addressed to AIRBUS at the
address given above. Quote the number of this Service Bulletin, the MSN and, if
applicable the Retrofit Information Letter (RIL) reference.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
26 EN6115V3-7 8 BOLT
26 EN6115V4-8 8 BOLT
26 EN6115V6-14 8 BOLT
27 ASNA2531-3 8 NUT
27 ASNA2531-4 4 NUT
27 ASNA2531-6 4 NUT
28 ABS1738K4 4 NUT
29 ABS1738K6 4 NUT
57 MS24665-153(D4296) 2 PIN (1)
NOTE(S)
Refer to the AIRBUS Ref. SM if you find part numbers of hardware components which
you cannot identify. The SM will give you the correct part number to part number
relationship.
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.

### Page 48

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 48
CONF 002
Components for task set A350-A-57-XX-P069-01000-93AA-A Replacement of the
Fasteners on the Rear Spar and the Front Spar
Procurement address D4296
AIRBUS Material, Logistics and Suppliers Standard
Parts
Customer Order Fulfilment
Phone: +49 (0) 40 50 76 40 02
E-mail: Please contact your Single Point Of Contact
(SPOC)
Internet: http://spares.airbus.com or via SPEC2000
NOTE(S)
For standard hardware the purchase order must be addressed to AIRBUS at the
address given above. Quote the number of this Service Bulletin, the MSN and, if
applicable the Retrofit Information Letter (RIL) reference.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
57 MS24665-153(D4296) 2 PIN (1)
NOTE(S)
Refer to the AIRBUS Ref. SM if you find part numbers of hardware components which
you cannot identify. The SM will give you the correct part number to part number
relationship.
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
CONF 003
Components for task set A350-A-57-XX-P069-01000-93AA-A Replacement of the
Fasteners on the Rear Spar and the Front Spar
Procurement address D4296
AIRBUS Material, Logistics and Suppliers Standard
Parts
Customer Order Fulfilment
Phone: +49 (0) 40 50 76 40 02
E-mail: Please contact your Single Point Of Contact
(SPOC)
Internet: http://spares.airbus.com or via SPEC2000
NOTE(S)
For standard hardware the purchase order must be addressed to AIRBUS at the
address given above. Quote the number of this Service Bulletin, the MSN and, if
applicable the Retrofit Information Letter (RIL) reference.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
26 EN6115V3-7 8 BOLT
26 EN6115V4-8 8 BOLT
26 EN6115V6-14 8 BOLT
27 ASNA2531-3 8 NUT
27 ASNA2531-4 4 NUT
27 ASNA2531-6 4 NUT
28 ABS1738K4 4 NUT
29 ABS1738K6 4 NUT

### Page 49

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 49
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
57 MS24665-153(D4296) 2 PIN (1)
NOTE(S)
Refer to the AIRBUS Ref. SM if you find part numbers of hardware components which
you cannot identify. The SM will give you the correct part number to part number
relationship.
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
CONF 004
Components for task set A350-A-57-XX-P069-01000-93AA-A Replacement of the
Fasteners on the Rear Spar and the Front Spar
Procurement address D4296
AIRBUS Material, Logistics and Suppliers Standard
Parts
Customer Order Fulfilment
Phone: +49 (0) 40 50 76 40 02
E-mail: Please contact your Single Point Of Contact
(SPOC)
Internet: http://spares.airbus.com or via SPEC2000
NOTE(S)
For standard hardware the purchase order must be addressed to AIRBUS at the
address given above. Quote the number of this Service Bulletin, the MSN and, if
applicable the Retrofit Information Letter (RIL) reference.
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
26 EN6115V3-7 8 BOLT
26 EN6115V4-8 8 BOLT
26 EN6115V6-14 8 BOLT
27 ASNA2531-3 8 NUT
27 ASNA2531-4 4 NUT
27 ASNA2531-6 4 NUT
28 ABS1738K4 4 NUT
29 ABS1738K6 4 NUT
57 MS24665-153(D4296) 2 PIN (1)
NOTE(S)
Refer to the AIRBUS Ref. SM if you find part numbers of hardware components which
you cannot identify. The SM will give you the correct part number to part number
relationship.
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
CONF 001
Referenced parts for task set A350-A-57-XX-P069-01000-93AA-A Replacement of
the Fasteners on the Rear Spar and the Front Spar
T o accomplish this Service Bulletin it is necessary to use the expendable parts listed in:
Ref. MP A350-A-57-17-71-00ZZZ-720Z-A

### Page 50

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 50
CONF 002
Referenced parts for task set A350-A-57-XX-P069-01000-93AA-A Replacement of
the Fasteners on the Rear Spar and the Front Spar
T o accomplish this Service Bulletin it is necessary to use the expendable parts listed in:
Ref. MP A350-A-57-17-71-00ZZZ-720Z-A
CONF 003
Referenced parts for task set A350-A-57-XX-P069-01000-93AA-A Replacement of
the Fasteners on the Rear Spar and the Front Spar
T o accomplish this Service Bulletin it is necessary to use the expendable parts listed in:
Ref. MP A350-A-57-17-71-00ZZZ-720Z-A
CONF 004
Referenced parts for task set A350-A-57-XX-P069-01000-93AA-A Replacement of
the Fasteners on the Rear Spar and the Front Spar
T o accomplish this Service Bulletin it is necessary to use the expendable parts listed in:
Ref. MP A350-A-57-17-71-00ZZZ-720Z-A
CONF ALL
E. LIST OF EXISTING PARTS
No parts

### Page 51

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 51
3. ACCOMPLISHMENT INSTRUCTIONS
Task set A350-A-57-XX-P069-01000-93AA-A (A350-A-57-XX-P069-01ZZZ-93AZ-A)
Replacement of the Fasteners on the Rear Spar and the Front Spar
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
WARNING: BEFORE YOU DO WORK IN OR NEAR A FUEL TANK, MAKE SURE THAT YOU
OBEY ALL THE SAFETY PROCEDURES. THIS WILL PREVENT INJURY TO
PERSONS AND/OR DAMAGE TO THE AIRCRAFT.
WARNING: IF YOU DO ABRASIVE OR POLISHING WORK IN OR NEAR A FUEL TANK, BE
CAREFUL NOT TO MAKE SPARKS. SPARKS CAN CAUSE A FIRE.
CAUTION: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL
WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND MECHANICALLY
SERVICEABLE). WHEN YOU DO A MAINTENANCE WORK, REPAIRS OR
MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND
THE WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND
DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO Ref. ESP A350-A-20-55-XX-01ZZZ-
042Z-A.
CAUTION: DO NOT USE THE FUEL PIPES AND THE EQUIPMENT AS HANDHOLDS WHEN
YOU DO WORK IN A FUEL TANK. THIS WILL PREVENT DAMAGE TO THEM.
CAUTION: BE CAREFUL WHEN YOU DO WORK IN THE CENTER WING BOX. IF YOU DO
NOT OBEY THE NECESSARY PRECAUTIONS, THERE IS A RISK OF DAMAGE
ON THE CARBON RODS AND ON THE CARBON PARTS OF THE CENTER WING
BOX.
NOTE: The accomplishment instructions of this Service Bulletin include procedures given in
other documents or in other sections of the Service Bulletin. When the words “refer to”
are used and the operator has a procedure accepted by the local authority he belongs to,
the accepted alternative procedure can be used. When the words “in accordance with”
are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service Bulletin.
Operators can therefore, as deemed necessary, omit or add access and/or close-up steps
to add flexibility to their maintenance operations as long as the technical intent of the
Service Bulletin is met within the set parameters.
NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms. Refer
to paragraph 1.J., References, for the definition of acronyms.
NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance necessary
to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, including Required for Compliance paragraph
contained herein, contact AIRBUS for further instructions and approval.

### Page 52

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 52
NOTE: This Service Bulletin is classified mandatory or expected to be classified mandatory by
an Airworthiness Directive (AD). The paragraphs 3.C. and 3.E. in these accomplishment
instructions are Required for Compliance (RC) and must be done to comply with the AD.
T o allow more flexibility, the rule "refer to" and "in accordance with" will apply to these
paragraphs 3.C. and 3.E. Other paragraphs are recommended and may be deviated from,
done as part of other actions or done with accepted methods different from those given
in the Service Bulletin, as long as the RC paragraphs can be done and the aircraft can be
put back into a serviceable condition.
NOTE: Discarded parts must be managed at the operator's discretion.
A. TASK SET ASSOCIATED INFORMATION
CONF 001
Maintenance Configuration
Fuel tanks opened
CONF 002
Maintenance Configuration
Fuel tanks opened
CONF 003
Maintenance Configuration
Fuel tanks opened
CONF 004
Maintenance Configuration
Fuel tanks opened
Task Manpower
CONF 001
TOTAL MAN-HOURS 82.25 h
CONF 002
TOTAL MAN-HOURS 82.75 h
CONF 003
TOTAL MAN-HOURS 82.25 h
CONF 004
TOTAL MAN-HOURS 82.25 h
CONF 001
ELAPSED TIME (HOURS) 17.00 h
CONF 002
ELAPSED TIME (HOURS) 17.00 h
CONF 003
ELAPSED TIME (HOURS) 17.00 h
CONF 004
ELAPSED TIME (HOURS) 17.00 h
CONF ALL
B. PREPARATION
(1) Task A350-A-57-XX-P069-01001-540A-A (A350-A-57-XX-P069-01ZZZ-540Z-A)
General Job Set-Up
CAUTION: MAKE SURE THAT YOU DO NOT CAUSE DAMAGE TO THE
SURFACES. THESE COMPONENTS ARE MADE OF CARBON FIBER
REINFORCED PLASTIC.

### Page 53

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 53
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 7.00 h
Minimum Number of person 2
Elapsed Time 3.50 h
Referenced Information
Manuals/Drawings References/Sheets
INTRO A350-A-00-61-04-11ZZZ-018Z-D
MP A350-A-24-41-XX-00ZZZ-170Z-AA350-A-57-11-65-00ZZZ-310Z-A
Procedure
NOTE: For the basic Aircraft configuration, refer to Ref. INTRO A350-A-00-61-04-
11ZZZ-018Z-D “Maintenance Procedure - Introduction”.
(a) Make sure that the aircraft is electrically grounded, refer to Ref. MP A350-A-24-
41-XX-00ZZZ-170Z-A.
(b) Do the job set-up as specified in the procedure, refer to Ref. MP A350-A-57-11-
65-00ZZZ-310Z-A
(2) Task A350-A-57-XX-P069-02001-540A-A (A350-A-57-XX-P069-02ZZZ-540Z-A)
Job Set-Up on the Front Spar, LH Side
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 2.00 h
Minimum Number of person 2
Elapsed Time 1.00 h
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-53-35-75-0YZZZ-520Z-AA350-A-53-35-75-0ZZZZ-520Z-A
SD A350-A-06-4X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices:
1 For the identification of access panels, refer to Ref. SD A350-A-06-4X-XX-
01ZZZ-04CZ-A.
(b) Remove the Panel 193CL and Panel 193DL, refer to Ref. MP A350-A-53-35-75-
0ZZZZ-520Z-A and Ref. MP A350-A-53-35-75-0YZZZ-520Z-A.
(c) If necessary, disengage all the electrical wires from the work area.
(3) Task A350-A-57-XX-P069-03001-540A-A (A350-A-57-XX-P069-03ZZZ-540Z-A)
Job Set-Up on the Rear Spar, LH Side

### Page 54

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 54
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 1.00 h
Minimum Number of person 2
Elapsed Time 0.50 h
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-57-17-71-00ZZZ-520Z-A
SD A350-A-06-4X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices:
1 For the identification of access panels, refer to Ref. SD A350-A-06-4X-XX-
01ZZZ-04CZ-A.
(b) Remove the Panel 141AZ, refer to Ref. MP A350-A-57-17-71-00ZZZ-520Z-A.
(c) If necessary, disengage all the electrical wires from the work area.
(4) Task A350-A-57-XX-P069-04001-540A-A (A350-A-57-XX-P069-04ZZZ-540Z-A)
Job Set-Up on the Front Spar, RH Side
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 2.00 h
Minimum Number of person 2
Elapsed Time 1.00 h
Referenced Information
Manuals/Drawings References/Sheets
MP A350-A-53-35-75-0YZZZ-520Z-AA350-A-53-35-75-0ZZZZ-520Z-A
SD A350-A-06-4X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices:
1 For the identification of access panels, refer to Ref. SD A350-A-06-4X-XX-
01ZZZ-04CZ-A.
(b) Remove the Panel 194ER and Panel 194FR, refer to Ref. MP A350-A-53-35-75-
0ZZZZ-520Z-A and Ref. MP A350-A-53-35-75-0YZZZ-520Z-A.
(c) If necessary, disengage all the electrical wires from the work area.
CONF 001 003 004
(5) Task A350-A-57-XX-P069-05001-540A-A (A350-A-57-XX-P069-05ZZZ-540Z-A)
Job Set-Up on the Rear Spar, RH Side

### Page 55

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 55
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 4.00 h
Minimum Number of person 2
Elapsed Time 2.00 h
Referenced Information
Manuals/Drawings References/Sheets
MP
A350-A-29-XX-XX-02ZZZ-170Z-A
A350-A-29-XX-XX-04ZZZ-562Z-A
A350-A-57-17-71-00ZZZ-520Z-A
SD
A350-A-06-2X-XX-01ZZZ-04CZ-A
A350-A-06-3X-XX-01ZZZ-04CZ-A
A350-A-06-4X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices:
1 For the identification of access panels, refer to Ref. SD A350-A-06-4X-XX-
01ZZZ-04CZ-A.
2 For identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-04CZ-A.
3 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-XX-01ZZZ-
04CZ-A.
4 T ag all the parts you must remove and retain to make the subsequent
installation easier.
5 Put all the retained hardware in identified plastic bags and attach the bags
to the related unit.
(b) Remove the Panel 142AZ, refer to Ref. MP A350-A-57-17-71-00ZZZ-520Z-A.
(c) If necessary, disengage all the electrical wires from the work area.
(d) Put the hydraulic systems in the depressurized for maintenance configuration,
refer to Ref. MP A350-A-29-XX-XX-04ZZZ-562Z-A.
(e) General rules for removal and installation procedures for the hydraulic systems,
refer to Ref. MP A350-A-29-XX-XX-02ZZZ-170Z-A
(f) Remove the pipe, item (1):
Refer to Ref. Fig.BA Removal of the Hydraulics Pipes on the Rear Spar, RH Side
1 Remove:
1 PIPE   Item (1) Retain
attached with:
2 BOLT   Item (4) Retain
2 WASHER   Item (5) Retain
1 CLAMP BLOCK   Item (3) Retain
2 BOLT   Item (6) Retain
2 WASHER   Item (7) Retain

### Page 56

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 56
1 CLAMP   Item (2) Retain

### Page 57

A350
SERVICE BULLETIN
Figure ICN-A350-A-57XXP069-A-FAPE3-064ZT-A-001-01 Fig.BA Sol.AA SHEET 1/2
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24
Removal of the Hydraulics Pipes on the Rear Spar, RH Side
Page 57
CONF 001 003 004
FR46
FR60
FR54
A
B
Z140
A
B
C
(1)
D
ICN-A350-A-57XXP069-A-FAPE3-064ZT-A-001-01

### Page 58

A350
SERVICE BULLETIN
Figure ICN-A350-A-57XXP069-A-FAPE3-064ZU-A-002-01 Fig.BA Sol.AA SHEET 2/2
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24
Removal of the Hydraulics Pipes on the Rear Spar, RH Side
Page 58
CONF 001 003 004
(2)
C
(7)
(6)
(3)
(1)
(5)
(4)
E
D
F
W
D
VIEW LOOKING UP
(1)
E
ICN-A350-A-57XXP069-A-FAPE3-064ZU-A-002-01

### Page 59

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 59
CONF 002
(5) Task A350-A-57-XX-P069-05002-540A-A (A350-A-57-XX-P069-05ZZZ-540Z-A)
Job Set-Up on the Rear Spar, RH Side
Job Set-Up Information
Manpower/Resources/Skills
Man-hours 4.00 h
Minimum Number of person 2
Elapsed Time 2.00 h
Referenced Information
Manuals/Drawings References/Sheets
MP
A350-A-29-XX-XX-02ZZZ-170Z-A
A350-A-29-XX-XX-04ZZZ-562Z-A
A350-A-57-17-71-00ZZZ-520Z-A
SD
A350-A-06-2X-XX-01ZZZ-04CZ-A
A350-A-06-3X-XX-01ZZZ-04CZ-A
A350-A-06-4X-XX-01ZZZ-04CZ-A
Procedure
(a) Standard Practices:
1 For the identification of access panels, refer to Ref. SD A350-A-06-4X-XX-
01ZZZ-04CZ-A.
2 For identification of zones, refer to Ref. SD A350-A-06-3X-XX-01ZZZ-04CZ-A.
3 For the Frame (FR) identification, refer to Ref. SD A350-A-06-2X-XX-01ZZZ-
04CZ-A.
4 T ag all the parts you must remove and retain to make the subsequent
installation easier.
5 Put all the retained hardware in identified plastic bags and attach the bags
to the related unit.
(b) Remove the Panel 142AZ, refer to Ref. MP A350-A-57-17-71-00ZZZ-520Z-A.
(c) If necessary, disengage all the electrical wires from the work area.
(d) Put the hydraulic systems in the depressurized for maintenance configuration,
refer to Ref. MP A350-A-29-XX-XX-04ZZZ-562Z-A.
(e) General rules for removal and installation procedures for the hydraulic systems,
refer to Ref. MP A350-A-29-XX-XX-02ZZZ-170Z-A
(f) Remove the pipe, item (1):
Refer to Ref. Fig.BA Removal of the Hydraulics Pipes on the Rear Spar, RH Side
1 Remove:
1 PIPE   Item (1) Retain
attached with:
2 BOLT   Item (4) Retain
2 WASHER   Item (5) Retain
1 CLAMP BLOCK   Item (3) Retain

### Page 60

A350
SERVICE BULLETIN
REV 00 Nov 16/21 A350-57-P069
REV 01 Jun 07/24 Page 60
2 BOLT   Item (6) Retain
2 WASHER   Item (7) Retain
1 CLAMP   Item (2) Retain

The text continues at https://openairdocs.org/service-documents/airbus/a350-57-p069/file/39e2d35d43ff.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
