# Airbus All Operators Transmission A24R009-20

Copy: No revision named ("A24R009-20 R00 with Appx 1 and 2"), 13 pages: PDF https://openairdocs.org/files/sha256/da/77/da77f457011660d09291ded6770ce3405704ba32dd7221cc07a5be045d3459ad; text https://openairdocs.org/service-documents/airbus/aot-a24r009-20/file/da77f4570116.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2021-0547, the docket of AD 2021-21-02. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Other document (All Operators Transmission)
- Number: A24R009-20
- Page: https://openairdocs.org/service-documents/airbus/aot-a24r009-20

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/aot-a24r009-20/proposed.md).

## Text (13 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2021-0547, the docket of AD 2021-21-02. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

CUSTOMER SERVICES DIRECTORATE
2 ROND POINT EMILE DEWOITINE
31700 BLAGNAC FRANCE
TELEPHONE + 33 (0)5 61 93 33 33
ALERT OPERATORS TRANSMISSION - AOT
AOT ref: A24R009-20 Rev 00 Page 1 of 6 Date: 23-SEP-2020
© AIRBUS S.A.S. 2020. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
SUBJECT: ATA 24 – Ni-Cd Batteries - Risk of capacity reduction during aircraft parking
AIRCRAFT TYPE: A380
OUR REF.: A24R009-20 Rev 00 dated 23-SEP-2020
EFFECTIVITY DATE: 23-SEP-2020
1. AIRCRAFT AFFECTED
All Aircraft 
2. REFERENCED DOCUMENTATION
2.1 APPENDIX
Appendix 1: Short term action
 
Appendix 2: On-wing battery preservation procedure
2.2 REFERENCES
Ref 1: ISI 24.00.00046 (ATA 24 - Recommendations for parking & storage during COVID19       
period)
Ref 2: Task in AMM PB 10-10-00 (Parking and storage procedure)
Ref 3: Task in AMM PB 10-11-00 (Parking periodic ground checks)
Ref 4: Task in AMM PB 10-30-00 (Return to operation after a parking period)
Ref 5: Task in AMM PB 24-38-51, 24-38-52 & 24-38-41 (Removal of the battery)
Ref 6: Task in AMM PB 24-38-51, 24-38-52 & 24-38-41 (Installation of the battery)
Ref 7: Task in AMM PB 31-21-00 (Setting of the clock)
Ref 8: Task in AMM PB 24-41-00 (Energize the aircraft electrical circuits)
Ref 9: Task in AMM PB 24-41-00 (De-energize the aircraft electrical circuits)
Ref 10: Task in AMM PB 24-42-00 (Energize the ground service network)
Ref 11: Task in AMM PB 24-42-00 (De-Energize the ground service network)
Ref 12: SAFT Battery CMM 24-38-55 (Battery PN 505CH2)

### Page 2

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A24R009-20 Rev 00 Page 2 of 6 Date: 23-SEP-2020
© AIRBUS S.A.S. 2020. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
 
3. REASON
The purpose of this AOT is to inform the operators:
that the capacity of the batteries (FINs 3PB1, 3PB2, 3PB3 and 3PB4) may be reduced due to 
repetitive disconnections and connections during an aircraft parking period, as detailed in § 3.1 
and § 4.2.1 of this AOT 
and of the need of restoring the capacity of these batteries per ref 12, within a defined time 
frame.
 
3.1 FACTS
In the frame of massive aircraft grounding due to COVID-19 pandemic, several engineering reviews 
have been organised between Airbus and the battery supplier SAFT. During these reviews, it was 
highlighted that the current AMM aircraft parking procedures (per ref 2 & ref 3) requiring physical 
disconnection and periodic reconnection of batteries may induce a reduction in capacity for Ni-Cd 
batteries, when repetitively done.
The current AMM Aircraft Parking Procedures require:
to disconnect the batteries when the aircraft is parked and de-energized for more than 2 days 
(per ref 2).
to reconnect the batteries when aircraft is energized during aircraft periodic ground checks (per 
ref 3). 
to disconnect the batteries again at the end of the aircraft periodic ground check (per ref 3).
When a Ni-Cd battery is physically disconnected from the aircraft loads, it self-discharges, due to an 
electrochemical phenomenon, thus, inducing a reduction of battery capacity. 
After each cycle of battery self-discharge, the available battery capacity will decrease progressively and 
will not be recovered to 100% of its initial capacity even when the battery is charged again from the 
aircraft electrical network during the periodic ground checks per ref 3.
In order to restore the battery capacity, the battery must be sent to an approved battery shop for a 
periodical check or a battery regular check or a battery general overhaul per ref 12.
Note 1: This action in shop includes a battery charge at constant current which allows to restore the 
battery capacity. 
Note 2: On aircraft, it is not possible to:
restore the battery capacity as the battery is charged at constant voltage.
check the battery capacity.
3.2 CONSEQUENCES
As the battery capacity may be significantly reduced, the battery performance may be affected and 
hence, the battery functions may be not fully guaranteed.

### Page 3

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A24R009-20 Rev 00 Page 3 of 6 Date: 23-SEP-2020
© AIRBUS S.A.S. 2020. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
4. SHORT TERM ACTION
NOTE: This AOT is classified mandatory or expected to be classified mandatory by an Airworthiness 
Directive (AD). The accomplishment instructions marked as Required for Compliance (RC) must be 
done to comply with the AD. “RC” is indicating these paragraphs accordingly. If an AD is issued, 
reference should be made to the AD for the mandated accomplishment timescale.
NOTE: The accomplishment instructions of this AOT include procedures given in other documents or 
in other sections of the AOT. When the words ’refer to’ are used and the operator has a procedure 
accepted by the local authority he belongs to, the accepted alternative procedure can be used. When 
the words ’in accordance with’ are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this AOT do not 
constitute or affect the technical intent of the AOT. Operators can therefore, as deemed necessary, omit 
or add access and/or close-up steps to add flexibility to their maintenance operations as long as the 
technical intent of the AOT is met within the set parameters.
4.1 PLANNING AND MANPOWER
4.1.1 ACCOMPLISHMENT TIMESCALE (RC)
The compliance time for this AOT is defined as follows: 
          Within 6 months after the AOT effective date or prior to next flight, whichever occurs latest.
For additional information, refer to appendix 1 of this AOT.
4.1.2 MANPOWER
N/A
4.2 DESCRIPTION
4.2.1 APPLICABILITY
Group A
This AOT is applicable to Ni-Cd batteries (PN 505CH2) which have been disconnected, kept (on aircraft) 
and reconnected on aircraft per ref 2 and ref 3 more than 4 times during an aircraft parking period since 
last battery periodical check, battery regular check or battery general overhaul per ref 12, and which 
are still installed on aircraft, at the effectivity date of this AOT.
Refer to § 4.2.2 and § 4.2.3.1 of this AOT for the accomplishment of the required actions.
Group B
This AOT is also applicable to all other Ni-Cd batteries (PN 505CH2) not identified in group A.
Refer to § 4.2.3.2 of this AOT for the accomplishment of the required actions.

### Page 4

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A24R009-20 Rev 00 Page 4 of 6 Date: 23-SEP-2020
© AIRBUS S.A.S. 2020. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
4.2.2 TERMINATING ACTIONS (RC)
The restoration of the capacity of the batteries, identified in group A in § 4.2.1 of this AOT, is the 
terminating action for this AOT and is defined as follows:
-   Do a battery periodical check or a battery regular check or a battery general overhaul per ref 
12 in an approved battery shop.
Note: This action in shop includes a battery charge at constant current allowing to restore the 
battery capacity. 
 
4.2.3 APPLICATION OF NEW AMM PROCEDURES (RC)
In order to preserve batteries, when the aircraft is parked and de-energized for more than 2 days, the 
AMM will be revised to introduce, as detailed in § 5.2 of this AOT, the off-wing battery preservation or 
the on-wing battery preservation.  
4.2.3.1. For batteries identified in group A in § 4.2.1 of this AOT and installed on aircraft
After the terminating action, as detailed in § 4.2.2 of this AOT, is completed, the off-wing battery 
preservation or the on-wing battery preservation, as detailed in § 5.2 of this AOT, must be applied when 
the aircraft is parked and de-energized for more than 2 days.
From the effectivity date of this AOT, operators can start applying the off-wing battery preservation or 
the on-wing battery preservation when the aircraft is parked and de-energized more than 2 days. 
However, it is recommended that the battery capacity restoration, as detailed in § 4.2.2 of this AOT, is 
performed before the application of the on-wing battery preservation.
Note 1: A battery, affected by the issue detailed in § 3.1 of this AOT, cannot be restored through the 
application of the on-wing battery preservation.
Note 2: If the on-wing preservation procedure is applied for batteries with a reduced capacity, there is 
a risk that these batteries are over discharged before the aircraft is energized again per ref 3. This 
situation may prevent the battery from being recharged on aircraft.
4.2.3.2 For batteries identified in group B in § 4.2.1 of this AOT and installed on aircraft
After effectivity date of this AOT, the off-wing battery preservation or the on-wing battery preservation, 
as detailed in § 5.2 of this AOT, must be applied when the aircraft is parked and de-energized more 
than 2 days.
 
4.2.4 ACCESS
N/A
4.2.5 INSPECTION REQUIREMENTS 
N/A

### Page 5

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A24R009-20 Rev 00 Page 5 of 6 Date: 23-SEP-2020
© AIRBUS S.A.S. 2020. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
4.2.6 FINDINGS 
N/A
4.3 SPARES AND TOOLING
N/A
5. FURTHER INFORMATION
5.1 FOLLOW-UP PLAN
A webinar will be organized within two weeks after the publication of this AOT to answer all questions 
pertaining to this AOT.  
Additional information related to this AOT (for instance, frequently asked questions, complementary 
recommendations if any) will be provided through ref 1.
 5.2 IMPACTED DOCUMENTATION
The AMM will be revised (currently planned for JAN-2021) to introduce, as detailed below, the off-wing 
battery preservation or the on-wing battery preservation. The availability of the AMM advance copies is 
currently planned for 26-NOV-2020.
A - Off Wing Battery Preservation
If the aircraft is parked and de-energized more than 2 days, the batteries have to be disconnected and 
removed from aircraft per ref 5.
Note 1: To allow ground periodic checks per ref 3 during an aircraft parking period, batteries 
must be re-installed on aircraft and re-connected to the aircraft electrical network
Note 2: Batteries removed from aircraft in parking or storage have to be stored per ref 12.
B - On-Wing Battery Preservation
The on-wing battery preservation is a new procedure consisting in leaving the battery physically 
connected to the aircraft electrical network and keeping a minimum battery hot bus consumption, when 
the aircraft is parked and de-energized more than 2 days. This is achieved by pulling the circuit breakers 
of some loads supplied by the battery hot buses, as detailed in the appendix 2 of this AOT. In this 
configuration, there is no battery self-discharge, and hence the progressive and permanent reduction 
of the capacity of the batteries is avoided.
When the on-wing preservation procedure is applied, batteries must be sent to an approved battery 
shop for a battery regular check per ref 12, every six months during the aircraft parking period.   
6. AOT APPROVAL
The technical content of this document is approved under the authority of the DOA ref.EASA.21J.031.

### Page 6

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A24R009-20 Rev 00 Page 6 of 6 Date: 23-SEP-2020
© AIRBUS S.A.S. 2020. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
 
7. REPORTING
Questions about this AOT are to be addressed to Airbus Customer Services through  TechRequest on 
Airbus World, selecting Maintenance Engineering Domain, Engineering Support Section and ATA 24-
38.
As per latest reporting policy (Ref to OIT 999.0018/16), inspection results (with or without findings) are 
to be addressed to Airbus Customer Services through the generic e-mail 
address:  inspection.results@airbus.com.
Best Regards,
Christian FREMONT
VICE PRESIDENT ENGINEERING SUPPORT
CUSTOMER SERVICES
Jean-Luc MOUYSSET
VICE PRESIDENT A380 PROGRAMME
CUSTOMER SERVICES

### Page 7

Appendix 1 : Short Term Action
 
 
 
 
 
Figure 1
 
 
 
 
 
Examples as
 
per Figure 1
 
 
AOT
 
Applicability
 
Terminating action needed?
 
 
When?
 
 
 
 
Application of new AMM procedures
 
needed, if aircraft is parked again or remain
 
in parking?
 
 
 
Example 1
 
Group A
 
 
Yes
 
 
T
​
CT
​
 , at the latest
 
 
Recommended before AOT terminating action
 
Required after AOT terminating action
 
Example 2
Group A
 
 
Yes
 
 
T
​
CT
​
 , at the latest
 
 
 
Recommended before AOT terminating action
 
Required after AOT terminating action
 
 
Example 3
 
Group A
 
Yes
 
 
Prior to next flight
 
 
Recommended before AOT terminating action
 
Required after AOT terminating action
 
 
 
Example 1
 
Group B
 
No
 
 
Required after AOT effectivity date
 
 
Example 2
 
Group B
 
No
 
Required after AOT effectivity date
 
Example 3
Group B
 
No
 
 
Required after AOT effectivity date
 
 
 
 
 
AOT ref:
​
 A24R009-20 Rev 00
 
Page 1 of 1
 
Date: 
​
23-SEP-2020

### Page 8

Appendix 2 : On-wing battery preservation procedure
 
 
 
CAUTION
​
:
If
on-wing
battery
preservation
procedure
is
applied,
during
parking
period,
Battery
APU
 
 
 
 
 
 
 
 
 
 
 
 
 
 
must not be swapped with another position or with another aircraft.
 
The
procedures
per
ref
2,
ref
3
and
ref
4
are
modified
to
include
the
instructions
for
the
on-wing
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
battery preservation, as detailed below:
 
 
A/ The parking and storage procedure (ref 2) is modified as follows:
 
●
Perform all steps from step 3.A.(1) to step 4.T.(1) of ref 2.
 
●
If
the
parking
period
is
more
than
2
days,
​
perform
the
following
steps
instead
of
step
4.T.(2)
of
ref
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
2 :
 
(1)
In
the
cockpit,
on
ELEC
section
of
panel
1225VM,
release
the
pushbutton
switches
of
BAT
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1(2)(APU)(ESS).
 
(2)
In
the
cockpit,
on
ELEC
section
of
panel
1225VM,
check
the
voltage
of
the
BAT
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1(2)(APU)(ESS): 
 
(a)
If
one
of
the
battery
voltages
is
less
than
26V, perform
a
cycle
of
battery
charge
as
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
follows:
 
○
On the ECAM control panel:
 
-
Push the ELEC DC key to get the ELEC DC system page.
 
○
On ELEC section of panel 1225VM:
 
-
Push
the
related
BAT
1(2)(APU)(ESS)
pushbutton
switch
(OFF
and
FAULT
 
 
 
 
 
 
 
 
 
 
legends off) to start the charging cycle of the battery 1(2)(APU)(ESS).
 
○
On
the
lower
ECAM
DU,
wait
until
the
current
value
shown
on
the
"ELEC
DC"
page
is
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
less than 1 A to charge the battery.
 
Note: 
​
The time for the battery to charge can be approximately 30 minutes.
 
(b)
Otherwise, push the BAT 1(2)(APU)(ESS) pushbutton switches.
 
●
Perform all steps from step 4.T.(3) to step 4.T.(4) of ref 2.
 
●
If the parking period is more than 2 days,
​
 
​
perform the following steps after step 4.T.(4) of ref 2:
 
(1)
Energize the ground service network from the external power per ref 10.
 
Note:
​
This
step
is
necessary
only
to
have
light
in
the
avionic
bay
and
in
the
cockpit.
​
If
a
torch
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
is used to perform steps (2) to (4) below, step (1) above can be disregarded.
 
(2)
In
the
cockpit,
on
ELEC
section
of
panel
1225VM,
put
the
WARNING
NOTICE(S)
in
position
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
“Do not to operate the batteries”.
 
 
AOT ref:
​
 A24R009-20 Rev 00
 
Page 1 of 6
 
Date: 
​
23-SEP-2020

### Page 9

(3)
Immediately open, safety and tag these circuit breakers after the aircraft is de-energized :
 
Panel
 
Designation
 
FIN
 
Location
 
2500VU
 
C/B-ELEC RAT SOL 1 SPLY
 
13XE
 
2149
 
2500VU
 
C/B-ELEC RAT SOL 2 SPLY
 
14XE
 
2049
 
2500VU
 
C/B-A/C ON GND INDIC IRDC
 
50XR
 
2047 (or 0849)
 
2500VU
 
C/B-EBCU BAT SPLY
 
25GY
 
2061
 
2500VU
 
C/B-ADIRU 3 28VDC BKUP
 
42FP
 
2055
 
2500VU
 
C/B-CLOCK TBU
 
4FS
 
2165
 
 
(4)
On
the
overhead
panel
(1225VM),
put
the
Battery
​
ESS/APU/OFF/1/2
switch
in
the
BAT2
 
 
 
 
 
 
 
 
 
 
 
 
 
position.
 
(5)
De-energize the ground service network from the external power per ref 11.
 
Note:
​
If
a
torch
has
been
used
to
perform
steps
(2)
to
(4)
above,
step
(5)
above
can
be
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
disregarded.
 
●
Perform all steps from step 4.T.(5) to step 5.B.(2) of ref 2.
 
 
 
 
AOT ref:
​
 A24R009-20 Rev 00
 
Page 2 of 6
 
Date: 
​
23-SEP-2020

### Page 10

B/ The parking periodic ground checks procedure (ref 3)  is modified as
 
follows:
 
 
●
Perform all steps from step 3.A.(1) to step 3.B.(3).(a) of ref 3.
 
●
If the parking period is more than 2 days,
​
 
​
perform the following steps after step 3.B.(3).(a) of ref 3:
 
(1)
Energize the ground service network from the external power per ref 10.
 
Note:
​
This
step
is
necessary
only
to
have
light
in
the
avionic
bay
and
in
the
cockpit.
​
If
a
torch
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
is used to perform steps (2) to (4) below, step (1) above can be disregarded.
 
(2)
Remove safety clips and tags and close these circuit breakers:
 
Panel
 
Designation
 
FIN
 
Location
 
2500VU
 
C/B-ELEC RAT SOL 1 SPLY
 
13XE
 
2149
 
2500VU
 
C/B-ELEC RAT SOL 2 SPLY
 
14XE
 
2049
 
2500VU
 
C/B-A/C ON GND INDIC IRDC
 
50XR
 
2047 (or 0849)
 
2500VU
 
C/B-EBCU BAT SPLY
 
25GY
 
2061
 
2500VU
 
C/B-ADIRU 3 28VDC BKUP
 
42FP
 
2055
 
2500VU
 
C/B-CLOCK TBU
 
4FS
 
2165
 
 
(3)
In
the
cockpit,
on
ELEC
section
of
panel
1225VM,
remove
the
WARNING
NOTICE(S)
in
 
 
 
 
 
 
 
 
 
 
 
 
 
 
position “Do not to operate the batteries”.
 
(4)
De-energize the ground service network from the external power per ref 11.
 
Note: 
​
If a torch has been used to perform steps (2) to (4) above, step (4) can be disregarded.
 
(5)
Adjust the clock per ref 7.
 
●
Perform all steps from step 3.B.(3).(b) to step 3.B.(3).(d) of ref 3.
 
●
Do not perform step 3.B.(3).(e) of ref 3.
 
●
Perform all steps from step 3.C.(1) to step 4.M.(2) of ref 3.
 
●
If
the
parking
period
is
more
than
2
days,
​
perform
the
following
steps
instead
of
step
4.M.(3)
of
ref
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
3:
 
(1)
In
the
cockpit,
on
ELEC
section
of
panel
1225VM,
release
the
pushbutton
switches
of
BAT
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1(2)(APU)(ESS).
 
(2)
In
the
cockpit,
on
ELEC
section
of
panel
1225VM,
check
the
voltage
of
the
BAT
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1(2)(APU)(ESS): 
 
(a)
If
one
of
the
battery
voltages
is
less
than
26V, perform
a
cycle
of
battery
charge
as
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
follows:
 
 
AOT ref:
​
 A24R009-20 Rev 00
 
Page 3 of 6
 
Date: 
​
23-SEP-2020

### Page 11

○
On the ECAM control panel:
 
-
Push the ELEC DC key to get the ELEC DC system page.
 
○
On ELEC section of panel 1225VM:
 
-
Push
the
related
BAT
1(2)(APU)(ESS)
pushbutton
switch
(OFF
and
FAULT
 
 
 
 
 
 
 
 
 
 
legends off) to start the charging cycle of the battery 1(2)(APU)(ESS).
 
○
On
the
lower
ECAM
DU,
wait
until
the
current
value
shown
on
the
"ELEC
DC"
page
is
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
less than 1 A to charge the battery.
 
Note: 
​
The time for the battery to charge can be approximately 30 minutes.
 
(b)
Otherwise, push the BAT 1(2)(APU)(ESS) pushbutton switches.
 
●
Perform step 4.M.(4) of ref 3.
 
●
If the parking period is more than 2 days,
​
 
​
perform the following steps after step 4.M.(4) of ref 3 :
 
(1)
Energize the ground service network from the external power per ref 10.
 
 
Note:
​
This
step
is
necessary
only
to
have
light
in
the
avionic
bay
and
in
the
cockpit.
​
If
a
torch
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
is used to perform steps (2) to (4) below, step (1) above can be disregarded.
 
(2)
In
the
cockpit,
on
ELEC
section
of
panel
1225VM,
put
the
WARNING
NOTICE(S)
in
position
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
“Do not to operate the batteries”.
 
(3)
Immediately open, safety and tag these circuit breakers after the aircraft is de-energized :
 
Panel
 
Designation
 
FIN
 
Location
 
2500VU
 
C/B-ELEC RAT SOL 1 SPLY
 
13XE
 
2149
 
2500VU
 
C/B-ELEC RAT SOL 2 SPLY
 
14XE
 
2049
 
2500VU
 
C/B-A/C ON GND INDIC IRDC
 
50XR
 
2047 (or 0849)
 
2500VU
 
C/B-EBCU BAT SPLY
 
25GY
 
2061
 
2500VU
 
C/B-ADIRU 3 28VDC BKUP
 
42FP
 
2055
 
2500VU
 
C/B-CLOCK TBU
 
4FS
 
2165
 
 
(4)
On
the
overhead
panel
(1225VM),
put
the
Battery
​
ESS/APU/OFF/1/2
switch
in
the
BAT
2
 
 
 
 
 
 
 
 
 
 
 
 
 
 
position (if not already done).
 
(5)
De-energize the ground service network from the external power per ref 11.
 
Note:
​
If
a
torch
has
been
used
to
perform
steps
(2)
to
(4)
above,
step
(5)
above
can
be
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
disregarded.
 
●
Perform all steps from step 4.M.(5) to step 5.A.(6) of ref 3.
 
 
 
AOT ref:
​
 A24R009-20 Rev 00
 
Page 4 of 6
 
Date: 
​
23-SEP-2020

### Page 12

C/
The
return
to
operation
after
a
parking
period
procedure
(ref
4)
is
modified
 
 
 
 
 
 
 
 
 
 
 
 
 
 
as follows:
 
●
Perform all the steps from 3.A.(1) to 3.B of ref 4.
 
●
If the parking period is more than 2 days,
​
 
​
perform the following steps after step 3.B of ref 4 :
 
(1)
Disconnect and remove APU Battery (3PB4) per ref 5.
 
(2)
Install and connect serviceable APU battery (3PB4) per ref 6.
 
Note
​
:
In
case
of
a
non-revenue
flight
(per
ref
3),
the
replacement
of
the
APU
Battery
(3PB4)
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
can be disregarded.
 
 
●
Perform the steps 3.C.(1).(a) and 3.C.(1).(b) of ref 4.
 
●
If the parking period is more than 2 days,
​
 
​
perform the following steps after step 3.C.(1).(b) of ref 4 :
 
(1)
Energize the ground service network from the external power per ref 10.
 
 
Note:
​
This
step
is
necessary
only
to
have
light
in
the
avionic
bay
and
in
the
cockpit.
​
If
a
torch
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
is used to perform steps (2) to (4) below, step (1) can be disregarded.
 
(2)
Remove safety clips and tags and close these circuit breakers:
 
Panel
 
Designation
 
FIN
 
Location
 
2500VU
 
C/B-ELEC RAT SOL 1 SPLY
 
13XE
 
2149
 
2500VU
 
C/B-ELEC RAT SOL 2 SPLY
 
14XE
 
2049
 
2500VU
 
C/B-A/C ON GND INDIC IRDC
 
50XR
 
2047 (or 0849)
 
2500VU
 
C/B-EBCU BAT SPLY
 
25GY
 
2061
 
2500VU
 
C/B-ADIRU 3 28VDC BKUP
 
42FP
 
2055
 
2500VU
 
C/B-CLOCK TBU
 
4FS
 
2165
 
 
(3)
In
the
cockpit,
on
ELEC
section
of
panel
1225VM,
remove
the
WARNING
NOTICE(S)
in
 
 
 
 
 
 
 
 
 
 
 
 
 
 
position “Do not to operate the batteries”.
 
(4)
De-energize the ground service network from the external power per ref 11.
 
Note: 
​
If a torch has been used to perform steps (2) to (4) above, step (4) can be disregarded.
 
(5)
Adjust the clock per ref 7.
 
●
Perform step 3.C.(2) per of 4.
 
 
●
If the parking period is more than 2 days,
​
 
​
perform the following steps instead step 3.C.(3) of ref 4:
 
 
 
AOT ref:
​
 A24R009-20 Rev 00
 
Page 5 of 6
 
Date: 
​
23-SEP-2020

### Page 13

(1)
In
the
cockpit,
on
ELEC
section
of
panel
1225VM,
release
the
pushbutton
switches
of
BAT
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1(2)(APU)(ESS).
 
(2)
In
the
cockpit,
on
ELEC
section
of
panel
1225VM,
check
the
voltage
of
the
BAT
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1(2)(APU)(ESS): 
 
(a)
If
one
of
the
battery
voltages
is
less
than
26V, perform
a
cycle
of
battery
charge
as
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
follows:
 
○
On the ECAM control panel:
 
-
Push the ELEC DC key to get the ELEC DC system page.
 
○
On ELEC section of panel 1225VM:
 
-
Push
the
related
BAT
1(2)(APU)(ESS)
pushbutton
switch
(OFF
and
FAULT
 
 
 
 
 
 
 
 
 
 
legends off) to start the charging cycle of the battery 1(2)(APU)(ESS).
 
○
On
the
lower
ECAM
DU,
wait
until
the
current
value
shown
on
the
"ELEC
DC"
page
is
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
less than 1 A to charge the battery.
 
Note: 
​
The time for the battery to charge can be approximately 30 minutes.
 
(b)
Otherwise, push the BAT 1(2)(APU)(ESS) pushbutton switches.
 
●
Perform all steps from step 3.C.(4) to step 5.A.(7) of ref 4.
 
 
 
AOT ref:
​
 A24R009-20 Rev 00
 
Page 6 of 6
 
Date: 
​
23-SEP-2020

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
