# Airbus All Operators Transmission A26P005-21

Copy: No revision named ("AOT A26P005-21"), 4 pages: PDF https://openairdocs.org/files/sha256/50/bd/50bd0138934314e6120af3f154f1cf6dd91a9022032237b87c44d3e960fc6a61; text https://openairdocs.org/service-documents/airbus/aot-a26p005-21/file/50bd01389343.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2022-1167, the docket of AD 2022-25-22. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Other document (All Operators Transmission)
- Number: A26P005-21
- Page: https://openairdocs.org/service-documents/airbus/aot-a26p005-21

## Text (4 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2022-1167, the docket of AD 2022-25-22. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A26P005-21 Rev 00 Page 1 of 4 Date: 17-MAR-2022
© AIRBUS S.A.S. 2022. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
SUBJECT: ATA 26 – Blanking plug found installed on Engine Fire Extinguishing pipe nozzle
AIRCRAFT TYPE: A350
OUR REF.: A26P005-21 Rev 00 dated 17-MAR-2022
EFFECTIVITY DATE: 22 March 2022
1. AIRCRAFT AFFECTED
Aircraft fitted with engines listed in NMSB Ref 2 for A350-900 aircraft and NMSB Ref 3 for A350-1000 
aircraft, “Effectivity” section.
Note: 
The aircraft on which the MP TASK Ref.1. was performed without any engine change 
afterwards are exempt from this inspection, as the fire extinguishing nozzle inspections are 
already requested by this task. 
The aircraft on which the MP task Ref.1 was performed through an alternative procedure 
provided by RDAF (due to missing tool P/N 98V26203000002) are exempt to this inspection.
The aircraft already inspected by operators and corrected following the same procedure as 
described in this AOT, with documented recording of the inspection results, are also exempt to 
redo this inspection.
This MP task Ref.1 is requested by the following instructions:
MP task ref 4 From May 2021 revision.
MPD task Ref 5.
2. REFERENCED DOCUMENTATION
2.1 APPENDIX
None
2.2 REFERENCES
Ref 1: MP TASK A350-A-26-21-XX-00001-340A-A Functional Check of Engine Fire Extinguishing 
System Distribution Piping for Leakage or Obstruction.
Ref 2: Rolls Royce procedure task NMSB TRENT XWB 26−AK834 issuance date 9th march 2022 for 
A350-900 model fitted with engine TRENT XWB-75, TRENT XWB-79, TRENT XWB-79B, TRENT XWB-
84.
Ref 3: Rolls Royce procedure task NMSB TRENT XWB 26−AK835 issuance date 10th march 2022 for 
A350-1000 model fitted with engine TRENT XWB-97.
Ref 4: MP TASK A350-A-71-00-51-00001-720A-A Installation of the Demountable Power Plant with the 
Split Engine Stand/Whole Engine Stand and the Bootstrap
Ref 5: MPD task 262100-00M03-01
3. REASON

### Page 2

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A26P005-21 Rev 00 Page 2 of 4 Date: 17-MAR-2022
© AIRBUS S.A.S. 2022. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
The purpose of this AOT is to advise A350 operators about findings on Engine Fire Extinguishing pipes 
nozzles, and to request one time inspection of the pipe nozzle and removal of blanking plug in case of 
finding.
3.1 FACTS
During one A350 aircraft C-Check, a black blanking plug was found on the fire Extinguishing pipe P/N 
AE711494-5, located in zone 2 of the engine core.
Fig. 1: Engine location of black blanking plug finding
 
Fig. 2: black blanking plug finding Fig. 3: Nozzle without black blanking plug
3.2 CONSEQUENCES
In case of an engine fire, the efficiency of the fire extinguishing system in zone core 2 cannot be 
confirmed. Indeed there is no confirmation that the blanking plug would be ejected at engine fire 
extinguishing agent discharge.
3.3 AIM

### Page 3

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A26P005-21 Rev 00 Page 3 of 4 Date: 17-MAR-2022
© AIRBUS S.A.S. 2022. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
The aim of this AOT is to inspect ENG 1 and ENG 2 fire extinguishing discharge tube nozzles in engine 
core zone 2. Any blanking plug that would have been left installed shall be removed.
4. SHORT TERM ACTION
NOTE: This AOT is classified mandatory or expected to be classified mandatory by an Airworthiness 
Directive (AD). The accomplishment instructions marked as Required for Compliance (RC) must be 
done to comply with the AD. “RC” is indicating these paragraphs accordingly. 
NOTE: The accomplishment instructions of this AOT include procedures given in other documents or 
in other sections of the AOT. When the words ’refer to’ are used and the operator has a procedure 
accepted by the local authority he belongs to, the accepted alternative procedure can be used. When 
the words ’in accordance with’ are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this AOT do not 
constitute or affect the technical intent of the AOT. Operators can therefore, as deemed necessary, omit 
or add access and/or close-up steps to add flexibility to their maintenance operations as long as the 
technical intent of the AOT is met within the set parameters.
4.1 PLANNING AND MANPOWER
4.1.1 ACCOMPLISHMENT TIMESCALE (RC)
Before the 31st August 2022, perform the procedure described in NMSB Ref 2 for A350-900 aircraft or 
NMSB Ref 3 for A350-1000 aircraft.
4.1.2 MANPOWER
Refer to NMSB Ref 2 for A350-900 aircraft or NMSB Ref 3 for A350-1000 aircraft, “Manpower” section.
4.2 DESCRIPTION
4.2.1 ACCESS
Refer to NMSB Ref 2 for A350-900 aircraft or NMSB Ref 3 for A350-1000 aircraft, “Accomplishment 
Instructions” section.
4.2.2 INSPECTION REQUIREMENTS (RC)
Inspect in accordance with NMSB Ref 2 for A350-900 aircraft or NMSB Ref 3 for A350-1000 aircraft, 
“Accomplishment Instructions” section.
4.2.3 FINDINGS (RC)
Perform corrective action in accordance with NMSB Ref 2 for A350-900 aircraft or NMSB Ref 3 for 
A350-1000 aircraft, “Accomplishment Instructions” section.
4.3 SPARES AND TOOLING

### Page 4

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A26P005-21 Rev 00 Page 4 of 4 Date: 17-MAR-2022
© AIRBUS S.A.S. 2022. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
Reference QTY DESIGNATION
98V27801000000 1 CONTROL LEVER FLAP SLAT
No specific 1
FLEXIBLE BORESCOPE (6, 8 OR 10 MM DIAMETER), WITH 
STRAIGHT AHEAD VIEWING TIP AND SIDE WAY VIEWING TIP.
No specific AR WARNING NOTICE(S)
No specific 1 ACCESS PLATFORM 1M (3 FT)- ADJUSTABLE
5. FURTHER INFORMATION
5.1 FOLLOW-UP PLAN
No follow up is required.
5.2 IMPACTED DOCUMENTATION
N/A
6. AOT APPROVAL
The technical content of this document is approved under the authority of the DOA ref.EASA.21J.031.
7. REPORTING
Questions about this AOT are to be addressed to Airbus Customer Services through TechRequest on 
Airbus World, selecting Engineering Domain Section and ATA 26-21
As per latest reporting policy (Ref to OIT 999.0018/16), inspection results (with or without findings) are 
to be addressed to Airbus Customer Services through the generic e-mail 
address:  inspection.results@airbus.com.
Best Regards,
Ahmed CHABBOUH
SENIOR DIRECTOR ENGINEERING 
SUPPORT
CUSTOMER SERVICES
Mathieu DUMAS
HEAD OF  A350 FLEET EFFICIENCY 
CUSTOMER SERVICES

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
