# Airbus All Operator Telex A300-53A0391

Copy: No revision named ("U.S. DOT/FAA - AOT A300-53A0391"), 4 pages: PDF https://openairdocs.org/files/sha256/6c/75/6c751e8972cab54f545da1c754825c8e7759826285403ab4cee1cbbb7f84ae6e; text https://openairdocs.org/service-documents/airbus/aot-a300-53a0391/file/6c751e8972ca.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2012-0858; AD 2012-25-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Other document (All Operator Telex)
- Number: A300-53A0391
- Page: https://openairdocs.org/service-documents/airbus/aot-a300-53a0391

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2012-25-06](https://openairdocs.org/ad/2012-25-06.md), effective Jan 30, 2013: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/aot-a300-53a0391/proposed.md).

## Text (4 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2012-0858; AD 2012-25-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

ALL OPERATOR TELEX - ALL OPERATOR TELEX
SUBJECT: ATA53 - WINGS - CENTER WINGS - INSPECTION FOR CRACK IN FR40 FWD
FITTING BETWEEN STRG 32 AND 33
OUR REF.: AOT A300-53A0391 dated 09 Aug 2011,
1. AIRCRAFT AFFECTED
This AOT is only applicable to A300B4-2C, A300B4-103, A300B4-120,
modified preventively in service (without preliminary crack finding) in  A300B4-203, A300-C4-203 and A300F4-203 aircraft,
accordance with SB Ref.2 (Airbus Modification 10453S20571), at any
revision.
Note: Aircraft having incorporated SB Ref.2 (Airbus Modification
10453s20571) at any revis1on  as applicable to the aircraft model, as a
corrective action (repair following crack finding) are not concerned by
the requirements of this AOT.
2. REFERENCED DOCUMENTATION
Ref.1: SB 53-0268 Revision 06 - dated 07 January 2002
Ref.2: SB 53-0297 Revision 02  - dated 31 October 1995
Ref.3: SB 53A0387 Revision 00 - dated 12 September 2008
Ref.4: SB 57-6052 Revision 03  - dated 27 May 2002
Ref.5: SB 57-6053 Revision 03 - dated 28 May 2002
Ref.6: SB 57A6108 Revision 00 - dated 12 September 2008
Ref.7: OIT 999.0075/08 rev.1 - dated 09 September 2008
3. REASON
3.1 BACKGROUND
As detailed in OIT Ref.7, a crack was reported on one A300-600 aircratt,
at frame 40 R/H side. This crack initiated from the spot-faced hole
(inspected through ISB Ref.4). However, the subject aircraft had
previously been modified by SB Ref.5, which cancels the ISB Ref.4
requirements.
Therefore and pending completion of the full analysis using a refined
Finite Element Model,  a one-time Detailed Inspection (DET) of the post-
SB Ref.2 and Ref.5 fleets was launched in order to ensure the structural
integrity of frame 40.
Alert SB's Ref.3 for A300 and Ref.6 for A300-600 were issuec
accordingly.
operators reported crack finding further to completion of these Alert
SB's Ref.3 and Ref.6. This allowed completion of the analysis before any
additional short-term inspection.
3.2 NEW FINDINGS
During recent maintenance checks,  two aircraft (one A300B4 and one A300-
500) were found cracked at FR40 forward fitting.
These new crack findings are considered as unexpected since:
They were found after application of modification SB Ref.2 and
Ref. 5 which cancels the inspections in the area of study
They were found after  accomplishment of the one-time DET in
accordance with Alert SB Ref.3 and Alert SB Ref.6.
Those new findings require additional short-term inspections.
Page 1

### Page 2 (OCR)

3.3 AIM
The purpose of this AOT is to call for a repetitive DET of the FR40
forward fitting (without nut removal) up to the accomplishment of a one-
time Eddy Current or liquid penetrant inspection of this area (with nut
removal).
4. SHORT TERM ACTION
4.1 PLANNING AND MANPOWER
4.1.1 ACCOMPLISHMENT TIMESCALE
The repetitive DET described in paragraph 4.2.2.1 must be performed:
within 300 FC from  the receipt date of  this AOT
Then, repeated at intervals not exceeding 300 FC
Up to accomplishment of a one-time Non Destructive Testing (NDT)
Inspection  that must be pertormed within 36 months from the receipt
of this AOT.
Decomplish this this pectime regive ition carls the repetitive
DET requirements described in paragraph 4.2.2.1.
If this one-time NDT inspection is performed within 300 FC from the
receipt date of this AOT, no DET is required before or simultaneously.
4.1.2 MANPOWER
The manpower estimates given in this AOT are based on the direct labor
cost to do the work. These estimates assume that the work will be done
by experienced personnel, and may need to be revised upwards to suit
operator's circumstances. The estimates do not include the time to
prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and genera
administration work are also not included.
The total man-hours (MH) and elapsed time (ET)  required to perform the
repetitive DET are the same as the ones specified in SB Ref. 3 paragraph
The total MH and ET required to perform the one-time NDT inspection are
the same as the ones specified  in SB Ref.1 paragraph 1.E.
4.2 DESCRIPTION
4.2.1 JOB PREPARATION AND ACCESS
For the repetitive DET, refer to SB Ref.3 paragraph 3.B.
For the one-time NDT inspection, refer to SB Ref.1 paragraph 2.A. (1).
Note:
To perform the above mentioned NDT inspection, it is not required to
remove the vapor-seal.
4.2.2 INSPECTION INSTRUCTIONS
4.2.2.1 Repetitive DET
Refer to SB Ref.3 paragraph 3.C. This inspection is to be done without
nut removal.
4.2.2.2 NDT inspection
Page 2

### Page 3 (OCR)

Refer to SB Ref.1 paragraph 2.B. part "WITH NUT REMOVAL", with method of
Eddy Current (refer to NTM 53-15-17, Part 6) or liquid penetrant (refer
to NTM 53-15-17, Part 9).
Caution:
After the NDT inspection,  a new nut post-mod SB Ref.2 shall be installed
(Nut part number: NAS1726-8E or alternatives as per A300 SRM 51-30-31).
4.2.3 JOB CLOSE UP
For the repetitive DET, refer to SB Ref.3 paragraph 3.E.
For the one-time NDT inspection, refer to SB Ref.1 paragraph 2.D. and
2.E.
4.2.4 ACTIONS IN CASE OF FINDINGS
In case of fiefore next flight, please contact Airbus to get further  either the repetitive DET or the NDT
inspection,
instructions:
SEER1/SEER2/SEER3
Customer Services
Fax: +33 (0)5 61 93 28 73
Mailto:
region1.StructureRepairSupport@airbus.com
region2.StructureRepairSupport@airbus.com
region3.StructureRepairSupport@airbus.com
Or for AOG request
AIRTAC (Airbus Technical AOG Center)
Customer Services
Phone: +33 (0)5 61 93 34 00
Fax: +33 (0)5 61 93 35 00
Mailto: airtac@airbus.com
4.2.5 TOOLING
Inspection equipment for Eddy Current inspection as per NTM 53-15-
17, part 6  Inspection equipment for liquid penetrant inspection as per NTM 53-
15-17, Part 9
5. AOT APPROVAL
The technical content of this AOT has been approved under the authority
of EASA Design Organization Approval number  EASA 21J.031.
It is anticipated that this AOT will be rendered mandatory.
6. REPORTING/ACKNOWLEDGEMENT
Operators are requested to acknowledge receipt of this AOT within 48
hours after receipt to:
Cecile BORDES, SEES
E-mail: cecile.bordes@airbus.com
Fax number: +33+ (0) 5 61 93  36 14
Questions about this AOT and inspection results with or without findings
are to be sent to Airbus Customer Services engineering as soon as
possible, after the AOT accomplishment, to the attention of:
Page 3

### Page 4 (OCR)

Phone: +33 (0)5 61  Mr Sebastien FAURE, 93 31 68
Fax number +33 (0)5 61 93 36 14
E-mail: sebastien.s.faure@airbus.com
Best Regards,
P. BOUCHERAT
VICE PRESIDENT A300/A310/A300-600 PROGRAMME
CUSTOMER SERVICES DIRECTORATE
If you do not need to receive AOT any more  or if other people in your
organization need to be added to the distribution, please advise your
Airbus Customer Services contact accordingly.
For SITA or FAX users: You can have access to the complete version of
this document, including the attachments, by opening it in AirNov
engineering from Airbusworld. The document is available in AirN@v withir
hours after dispatch. You may  also contact the responsible Airbus
engineer in order to have the full content by email or fax.
Page 4

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
