# Airbus All Operators Telex A300-71A6029

Copy: No revision named ("U.S. DOT/FAA - Service Bulletin (2)"), 11 pages: PDF https://openairdocs.org/files/sha256/9e/f4/9ef43f4d8a9425f8bb9ce2c3ae07362252c9cda2471b641405d532a01529c1e8; text https://openairdocs.org/service-documents/airbus/aot-a300-71a6029/file/9ef43f4d8a94.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2011-0035; AD 2011-09-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Other document (All Operators Telex)
- Number: A300-71A6029
- Page: https://openairdocs.org/service-documents/airbus/aot-a300-71a6029

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2011-09-10](https://openairdocs.org/ad/2011-09-10.md), effective Jun 6, 2011: No revision named

## Text (11 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2011-0035; AD 2011-09-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AOT_7146029_00111. txt
ALL OPERATORS TELEX - ALL OPERATORS TELEX
SUBJECT: A300-600 GE CF6-80C2 - ATA 71 - Inspection and replacement
of forward engine mount cast yoke
OUR REF: AOT A300-71A6029 dated 30 March 2010
1. AIRCRAFT AFFECTED
All A300-600 CF6-80C2 powered aircraft
2. REFERENCED DOCUMENTATION
2.1 ESPM task 20-55-00 Cleaning (AIRBUS)
2.2 AMM task 24-00-00 PB301 General servicing
2.3 AMM task 71-13-00 PB301 Cowl doors - Servicing
2.4 AMM task 71-21-00 PB401 Engine forward mount -
Removal/Installation
2.5 CMMm 71-21-01 Forward mount assembly
2.6 GENERAL ELECTRIC Service Bulletin No. CF6-80C2 72-0222
2.7 AMM task 71-00-00 PB401 General - Removal/Installation
3. REASON
3.1 FACTS
In the frame of the Extended Service Goal (ESG) activities on GE CF6
engine mounts, it has been demonstrated that one  location on the CF6-
80C2 forward engine mounts does not meet the ESG objective (45000
There are 3 types of yokes in service: skinny cast yoke, strengthenec
cast yoke and  forged yoke versions. The torged yoke mount was
designed to increase fatigue life of the  system. The manufacturing
process was changed to increase fatigue life of the yoke.
Post-certification analysis to support ESG shows that the skinny cast
yoke does not  meet this objective.
Analysis requires that the skinny cast yokes (P/N 9383M43G08 or
9383M43G09 or 9383M43G10 or 9383M43G11) must be replaced within
7000FC after inspection.
3.2 CONSEQUENCES
Yoke failure could adversely affect the structural integrity of the
forward engine mount.
3.3 AIM
The aim of this AOT is to perform a one time detailed inspection of
the forward engine mount yokes of GE CF6-80C2 powered aircraft and to
replace by a forged yoke with improved fatigue life if skinny cast
yoke installed.
In case of replacement of  the skinny cast yoke,  the GE CF6-80C2
Service  Bulletin 72-0222 is to be completed if  not already
accomplished.
4. SHORT TERM ACTION
4.1 PLANNING AND MANPOWER
4.1.1 PLANNING
For each engine, do a General Visual Inspection (GVI) for the P/N of
Page 1

### Page 2 (OCR)

AOT_71A6029_00[1]. txt
9383M43G08 or 9383M43G09 or 9383M43G10 or 9383M43G11)'400FC after  the forward engine mount yoke and,  if found skinny (i.e. P/N  do a Detailed
Inspection (DET) as per paragraph 4.2 within the next
this AOT issuance date.
within 7000FC from Detailed Inspection, replace the skinny cast yoke
by a forged one as per §4.2.4.
4.1.2 MANPOWER
From 5 to 283 man-hours  and from 2.5 to 46.5 elapsed time hours are
required, depending on findings.
4.2 DESCRIPTION
Apply the following instructions for both engines.
4.2.1 General warning
WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE
CAUTIONS INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL
WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND MECHANICALLY
SERVICEABLE). WHEN YOU DO MAINTENANCE WORK, REPAIRS OR MODIFICATIONS,
ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND THE WORK AREA AS CLEAN
AS POSSIBLE.
TO DO THIS:
PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC; AS NECESSARY
ON WIRING AND COMPONENTS.
REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND OTHER
CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND DAMAGE
TO THE ELECTRICAL WIRING INSTALLATION.
IN CASE OF CONTAMINATION REFER TO ESPM TASK REF 2.1.
4.2.2 Inspection for the P/N of the forward engine mount yoke
4.2.2.a. Preparation
Make sure that the aircraft is electrically grounded (refer to AMM
task ref 2.2) .
Put the access platform(s) in position.
Open the fan cowl doors 435AL and 436AR for engine 1 and 445AL and
+46AR for engine 2 (refer to AMM task ref 2.3).
Open the thrust reverser cowl doors 451AL and 452AR for engine 1 anc
461AL and 462AR for engine 2 (refer to AMM task ref 2.3).
4.2.2.b. Procedure
Do a General Visual Inspection (GVI) for the P/N of the forward
engine mount yoke (refer to Appendix 01 Figure 1 and Figure 2).
If P/N 9383M43G08 or 9383M43G09  or 9383M43G10 or 9383M43G11 is not
installed,  complete the inspection report (Appendix 02). No further
action is necessary.
If P/N 9383M43G08 or  9383M43G09 or 9383M43G10 or 9383M43G11 is
installed,  do a Detailed Inspection (DET) for full rupture in the
forward engine mount skinny cast yoke as per §4.2.3.
4.2.2.c. Close-up
Make sure that the work areas are clean and clear of tools and other
Page 2

### Page 3 (OCR)

AOT_71A6029_00[1]. txt
items of equipment.
446AR for engine 2 (refer to AMM task ref 2.3)'452AR for engine 1 and  Close the fan cowl doors 435AL and 436AR for engine 1 and 445AL and
Close the  thrust reverser cowl doors 451AL and
Restore the system and the airfar to un tas oper ting condition.  461AL and 462AR for
4.2.3 Inspection of the Forward Engine Mount skinny Cast Yoke
4.2.3.a. Preparation
Make sure that the aircraft is electrically grounded (refer to AMM
task ref 2.2).
Put the access platform(s) in position.
Open the fan cowl doors 435AL and 436AR for engine 1 and 445AL and
446AR for engine 2 (refer to AMM task ref 2.3).
Open the thrust reverser cowl doors 451AL and 452AR for engine 1 and
461AL and 462AR for engine 2 (refer to AMM task ref 2.3).
4.2.3.b. Procedure
Refer to Appendix 01 Figure 1 and Figure 2 and Appendix 04.
Do a Detailed  Inspection (DET) of the forward engine mount skinny
cast yoke in the specified area shown on Appendix 01 Figure 2.
- If the skinny cast yoke is found fully ruptured,  contact Airbus at
the following address  for investigation and special workscope. In
addition,  the forward mount assembly must be removed and replaced
before next flight:
Laure Dupland, SEEE3
Customer Services
Phone: +33 (0)  5 61 18 20 24
Fax: +33 (0) 5 61 93  36  14
Mailto: laure.dupland@airbus.com
- If the skinny cast yoke is not ruptured, attach a Movement
Traceability Sheet (MTS) to the skinny cast yoke (Cf. Appendix 03).
The skinny cast yoke must be replaced by a torged yoke (P/N
1806M79G01) as per §4.2.4 before havinq accumulated 7000FC since the
MTS creation.
If a rupture is found on a skinny cast yoke within 7000FC,
Airbus at the following address for investigation and special
workscope. In addition, the forward mount assembly must be removed
and replaced before next flight:
Laure Dup and,  SEEE3
customer  Services
Phone: +33 (0)5 61 18 20 24
Fax: +33 (0)5 61 93 36 14
Mailto: laure.dupland@airbus.com
4.2.3.c. Close-up
Make sure that the work areas are clean and clear of tools and other
items of equipment.
Close the fan cowl doors 435AL and 436AR for engine 1 and 445AL and
446AR for engine 2 (refer to AMM task ref 2.3).
Close the thrust reverser cowl doors 451AL and  452AR for engine 1 and
461AL and 462AR for engine 2 (refer to AMM task ref 2.3).
Remove the access platform (s).
Page 3

### Page 4 (OCR)

AOT_71A6029_00[1]. txt
Restore the systems and the aircraft to normal operating condition.
4.2.4 Replacement of skinny cast yoke by a forged one
4.2.4.a. Preparation
Make sure that the aircraft is electrically grounded (refer to AMM
task ref 2.2) .
put the access platforcesure as specified in the removal/installation  Do the preparation procedure
of the forward engine mount (refer to AMM task ref 2.4).
4.2.4.b. Procedure
Remove the skinny cast yoke (refer to AMM task ref 2.4 and CMMm ref
2.5) and install a forged one P/N 1806M79G01 (refer to AMM task ref
2.4 and CMMm ref 2.5).
If GE VSB 72-0222 has not been already accomplished, modity the
forward engine mount system (see ret 2.6).
4.2.4.c Test
Install the power plant (refer to AMM task ref 2.7).
o the test procedure as specitied after the installation of the
power plant (refer to AMM task ref 2.7).
4.2.4.d Close-up
Remove the access platform(s).
4.3 MATERIAL INFORMATION
4.3.1 Material - Price and availability
following address of from any other aproved sturest at the
GENERAL ELECTRIC
Manager, Customer Account Support
GE Engine Services Distribution, L.L.C.
Product Support Operation
One Neumann way
Room 115
Cincinnati, OH 45215-1998 USA
http://customer.geae.com
Procurement terms for the equipment must be negotiated with the
equipment supplier.
The quantity of yokes to order depends on the result of the
inspection.
4.3.2 Tooling
accomplish this AOT, it is necessary to use the tools listed in
the AMM task ref 2.4.
4.4 NOTE
From this AOT issuance, a skinny cast yoke (P/N 9383M43G08 or
Page 4

### Page 5 (OCR)

AOT_71A6029_00[1]. txt
9383M43G09 or 9383M43G10 or 9383M43G11) can be re-installed on CF6-
80C2 A300-600 equipped aircraft only if a MTS (Movement Traceability
Sheet) is attached and if it has accumulated less than 7000FC since
the MTS creation.
caution note will be introduced in the AMM to avoid re-installation
of a skinny cast yoke without MTS.
5. FLOW CHART
For readability purpose, a flow chart has been compiled accordingly
(see Appendix 04).
6. AOT APPROVAL
The technical content of this AOT has been approved under the
authority of EASA design organization approval number EASA 21J.031.
7. REPORTING/ACKNOWLEDGMENT
Operators are requested to acknowledge receipt of this AOT within 48
hours after receipt to:
E-mail: richard.lascours@alrbus.com
Fax: +33/ (0) 5 61 93 32 73
This acknowledgement can be made through the Airbus RCSM when
available.
Questions about the technical content of this AOT are to be addressed
MS. Laure DUPLAND, SEEE3
TEL: +33 / (0) 5 61 18 20 24
FAX: +33  / (0) 5 61 93 36 14
E-Mail: laure.dupland@airbus.com
Best regards,
E. VAN AELST
VICE PRESIDENT A300 PROGRAMME
CUSTOMER SERVICES DIRECTORATE
If you receive this message via e-mail/internet, we draw your
attention to the fact that it may be monitored and/or intercepted.
Further, whilst Airbus has taken reasonable measures to ensure the
integrity of this message and its contents, no warranty, whether
© A haress of an us wor 2 or euest that it be rena stered  is given that the contents hereof conform to the
by fax or telex.
Page 5

### Page 6 (OCR)

Appendix 01 - AOT 71A6029 - Figures
Z 460
Z450 ..
WD
ENGINE MOUNT YOKE
NOTE: INSPECTION AREA
Figure 1: Forward Engine Mount Yoke

### Page 7 (OCR)

PN TO BE CHECKED
AREA TO BE
INSPECTED
Figure 2: Area to be inspected

### Page 8 (OCR)

Appendix 02 - AOT 71A6029 - Inspection Report
INSPECTION REPORT
AOT No.: A300-71A6029  DATE OF INSPECTION:
A/C MSN:  INSPECTION METHOD:
FLIGHT CYCLES:  GENERAL VISUAL INSPECTION FOR P/N
• DET FOR FULL RUPTURE
FLIGHT HOURS:
ENGINE 1 (LH)
YES  NO
SKINNY CAST YOKE (P/N 9383M43G08 OR 9383M43G09 OR
9383M43G10 OR 9383M43G11) INSTALLED?
SKINNY CAST YOKE FOUND FULLY RUPTURED?
ENGINE 2 (RH)
YES  NO
SKINNY CAST YOKE (P/N 9383M43G08 OR 9383M43G09 OR
9383M43G10 OR 9383M43G11) INSTALLED?
SKINNY CAST YOKE FOUND FULLY RUPTURED?
The results of the inspection must be forwarded to Airbus department SEEE3:
Laure Dupland, SEEE
Customer Services
Phone: +33 (0)5 61 18 20 24
Fax: +33 (0)5 61 93 36 14
Mailto: laure.dupland@airbus.com

### Page 9 (OCR)

Serial Number of the detail  ENDORSEMENT  All information stated in  the MTS have to be  validated/endorsed by the  relevant quality  organisation  Page: 1/1
POS  Position of the  detail part (ENG1  or ENG2)  • Issue date: 04-Mar-2005 Time: 12:09
CSN  Cycles  since new  of the  aircraft the  detail part  is fitted to
COMPONENT MOVEMENT TRACEABILITY SHEET  PART's S/N  AIRCRAFT  TSN  MSN WV  Aircraft  Weight  variant  Time since  new of the  aircraft the  detail part  Manufacturer  is fitted to  Serial Number  of the aircraft  the detail part  is fitted to
Model  Model of the  aircraft the  detail part is  fitted to
ASSY  CSO  TSO  Time since  overhaul of  the assembly  the detail  part is fitted  Serial  Cycles since  Number of  overhaul of  the assembly  the assembly  the detail  the detail  part is fitted  part is fitted  REMARKS  Reference date  (status/issue  date/time and page  number)
P/N  Part Number  of the  assembly the  detail part is  fitted to
CSI  Cycles since  MTS creation  of the detail
COMPONENT DESCRIPTION:  part
PART  TSI  0/00  Time since  MTS creation  of the detail
Nomenclature of the detail  DATE  P/N  Off  Reason  Reason for  removal (repair,  overhaul...)  Part Number of  the detail part  Date when the  detail part is  removed from the  aircraft  All relevant remarks on the  part/aircraft have to be  introduced here.  Appendix 03 - AOT 71A6029 - MTS explanation
part  Date when the  detail part is  fitted on the  aircraft or date  of MTS creation

### Page 10 (OCR)

ENDORSEMENT  Page: 1/1
• POS  Issue date: 04-Mar-2005 Time: 12:09
CSN
COMPONENT MOVEMENT TRACEABILITY SHEET  PART's S/N  AIRCRAFT  TSN  MSN W  Model
CSO
ASSY  TSO  REMARKS
S/N
P/N
CSI
COMPONENT DESCRIPTION:  PART  TSI  0:00
P/N
DATE  Off  Reason  Appendix 03 - AOT 71A6029 - MTS
On

### Page 11 (OCR)

CONTACT AIRBUS AND  REPLACE THE  FORWARD MOUNT  ASSEMBLY BEFORE  NEXT FLIGHT
YES  DO A DETAILED  INSPECTION (DET) OF  THE SKINNY CAST YOKE  FOR FULL RUPTURE  CAST YOKE  FULLY  RUPTURED?
CREATE AND ATTACH  A MTS (APPENDIX 03)  SEND TO AIRBUS INSPECTION  REPORT (APPENDIX 02)  REPLACE THE FORWARD ENGINE MOUNT  YOKE BY A FORGED YOKE (P/N 1806M79G01)  WITHIN 7000FC AND ACCOMPLISH GE SB 72-  0222 IF NOT ALREADY ACCOMPLISHED
DO A GENERAL VISUAL  INSPECTION OF THE ENGINE  FRONT MOUNT YOKE TO  IDENTIFY THE P/N WITHIN  400FC  SKINNY CAST YOKE (P/N  9383M43G08 or 9383M43G09  or 9383M43G10 or  9383M43G11) INSTALLED?
Appendix 04 - AOT 71A6029 - Flow Chart  NO  SEND TO AIRBUS  INSPECTION REPORT  (APPENDIX 02)  NO FURTHER ACTION

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
