# Airbus All Operator Telex A310-29A2098

Copy: No revision named ("AOT_A310-29A2098"), 5 pages: PDF https://openairdocs.org/files/sha256/13/b5/13b5a38597ed5882bab1a21afdbf2e2b421491c38725e944b2cdc3851589fca3; text https://openairdocs.org/service-documents/airbus/aot-a310-29a2098/file/13b5a38597ed.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2011-0388; AD 2011-16-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Other document (All Operator Telex)
- Number: A310-29A2098
- Page: https://openairdocs.org/service-documents/airbus/aot-a310-29a2098

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2011-16-03](https://openairdocs.org/ad/2011-16-03.md), effective Sep 9, 2011: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/aot-a310-29a2098/proposed.md).

## Text (5 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2011-0388; AD 2011-16-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

ALL OPERATORS TELEX - ALL OPERATORS TELEX
SUBJECT: ATA29 - RAM AIR TURBINE - SCREW REPLACEMENT
OUR REF: AOT A310-29A2098 dated 01 SEP 2009
1. AIRCRAFT AFFECTED
This AOT applies to all A310 in service aircraft equipped with Hamilton
Sundstrand Ram Air Turbine (RAT) Turbine Assembly PN 734350 series.
For A310 in service aircraft this AOT does not apply to aircraft Post-Moc
5161 (installation of the "Dowty/Vickers model"  Ram Air Turbine).
NOTE: Operators have to distinguish the Ram Air Turbine (RAT) Module from
the RAT Turbine Assembly sub-assembly.
2. REFERENCED DOCUMENTATION
REF 2:4MM 29-25-00'PB S01' Functional Test of RAT" (MPD Task 292500-01-1)  REF 2:AMM 29-25-00
REF 3:Hamilton  Sundstrand  Service Bulletin 730816-29-15
REF 4:AMM 29-25-00 PB 301"Extension of the RAT on the Ground"
REF 5:AMM 29-25-37 PB 401  "Removal of the RAT Turbine Assembly"
REF 7:AMM 29-25-00 PB 301 "Retraction of the RAT on Ground,Assembly"  REF 6:AMM 29-25-37 PB 401  ¿'¿Installation of the RAT Turbine
3. REASON
3.1 FACTS
Hamilton Sundstrand has discovered that some RAT were manufactured with
non-conforming screws, Ref.  1 Hamilton Sundstrand CMM. The purpose of
chese screws is to attach the balance washers, which can have a round or a
rectanqular shape depending on RAT confiquration. To date there have beer
five instances of a fractured screw on various RAT part number
Inspection of other screws  configurations. In one case, the balance washer was also tound missing.  in Hamilton Sundstrand stock revealec
metallographic non-conformities consistent with those of the fractured
screws. The suspect screws have been isolated to one batch from a specific
applied at treatment process, which bana resease fuse sibility to  brittle fracture.
3.2 CONSEQUENCES
material.  The applied heat treatment has resulted in a non-conforming screw  The affected screws are exposed to potential fracture, with
subsequent detachment or insecurity of the associated balance washer.
imbalance.  Detachment of the balance washer can create an unacceptable turbine
3.3 AIM
The aim of this AOT is to:
washer  - Inform all A310 operators of the discovered nonconforming RAT balance  screws,
- Provide operators with a procedure to check the suspect Part Numbers and
Page 1

### Page 2 (OCR)

Serial Numbers of In-Service/Spare RAT Turbine Assemblies, and to replace  the screws when affected.
- Provide operators with recommendations prior to any RAT ground test as
per Ref.2.
4. SHORT TERM ACTION
4.1 PLANNING AND MANPOWER
Airbus recommend that the actions described in paragraph 4.2. of this AOT  Following :  be carried out at the next convenient opportunity in accordance with the
4.1.1 Identification of suspect RAT
From the list of RAT Turbine Assembly Serial Numbers (S/N) provided in
Hamilton-Sundstrand SB Ref. 3, operators must identify the RAT that are in  the suspect batch.
CAUTION:
If the PN/SN of a RAT Turbine Assembly cannot be identified, the RAT must
be considered as suspect and inspected in accordance with the instructions
provided in this AOT paragraph 4.2.
4.1.2  Inspection/replacement
For RAT Turbine Assemblies included in the  suspect batch list,  operators
are requested to do the actions described in paragraph 4.2 within the
following timescale:
- within the next 1500 flight hours after receipt of this All operators
- within the next 9 months after receipt of this All Operators Telex,
whichever occurs  - before carrying out a RAT ground test as per Ref.2.  first.
Any RAT Turbine Assembly with a missing screw and/or a missing balance
washer during the inspection must be reworked immediately as per paragraph
4.1.3  MANPOWER
when screws are found in place on the turbine, Airbus estimate that a  maximum of 2 man-hours are required to gain access,  replace the screws and
identify Hamilton Sundstrand SB Ref. 3 accomplishment on the RAT Turbine
that cant be completely removed, missoval olathe kat turbine assembly  or with a screw
from the aircraft is required. In  required for replacement of the RAT Turbine Assembly and test on wing.  this case, a maximum of 6 man-hours are
4.2 DESCRIPTION OF TASK
4.2.1. INSPECTION AND REPLACEMENT OF BALANCE SCREWS ON AIRCRAFT
1.  Extend the Ram Air Turbine (RAT) as per Ref. 4 AMM Task.
2.  Open, safety and tag these circuit breakers:
PANEL  DESIGNATION  FIN  LOCATION
133VU  ACCU PRESS/CTL&/CARGO DOOR/PUMP 7GX  333/T51
Page 2

### Page 3 (OCR)

133VU  PTU CTL/G/Y  6GL  332/U60
If the RAT Turbine Assembly Serial Number is not listed in the
effectivity of the Ref. 3 Hamilton Sundstrand Service Bulletin:
a) No further action on the RAT is required. Go to paragraph
4.2.1. (6).
effectivity of Ref. 3 Hamilton Sundstrand Sersymbol "29-15":  If the RAT Turbine Assembly Serial Number is listed in the
the RAT Turbine Assembly nameplate bears the
a) The Ref. 3 Hamilton Sundstrand Service Bulletin has already
been applied.  No further action on the RAT is required. Go to
paragraph 4.2.1. (6).
She effect turbine Assembly nameplate does not bear the symbol  If the installed RAT Turbine Assembly Serial Number is listed in
a) If all the balance screws are fitted  on the turbine. within
the timescale given in paragraph 4.1.2.:
3 amit ton sunstrand service bullet in cordance with the net.
- Replace the RAT Turbine Assembly (Refer to Ref. 5 and Ref. 6
AMM Tasks) and  send the affected RAT Turbine Assembly to the
vendor for application of Ref. 3 Hamilton Sundstrand Service
Bulletin.
b) If one or  several screws are sheared/missing and the
associated balance washers are still fitted on the turbine.
Before the next flight:
- with the RAT installed on aircraft, replace all the balance
screws on the RAT Turbine Assembly in accordance with the Ret.
3 Hamilton Sundstrand Service Bulletin.
Or
- Replace the RAT Turbine Assembly (Refer to Ref. 5 and Ref. 6
AMM Tasks) and  send the affected RAT Turbine Assembly to the
vendor for application of Ref. 3 Hamilton Sundstrand Service  Bulletin.
c) If one or several screws  are fractured and balance washers are
missing, then before next flight:
- Replace the RAT Turbine Assembly (Refer to Ref. 5 and Ref. 6
AMM Tasks) and send the affected RAT Turbine Assembly to the
vendor to balance the turbine assembly and apply the Ref. 3
Hamilton Sundstrand Service Bulletin.
breakers:  Remove the safety clip(s) and tag(s) and close these circuit
133VU  PANEL  ACCU PRESS/CTL&/CARGO DOOR/PUMP  DESIGNATION  7GX  FIN  LOCATION  333/T51
133VU  PTU CTL/G/Y  6GL  332/U60
7.  Retract the Ram Air Turbine (RAT) as per Ref. 7 AMM Task.
Report all inspection results to Airbus in accordance with
paragraph 7 of this AOT.
4.2.2. INSPECTION AND REPLACEMENT OF SCREWS ON SPARE RAT
Page 3

### Page 4 (OCR)

1.  If the RAT Turbine Assembly is not listed in the effectivity of
the Ref. 3 Hamilton Service Bulletin:
- No further action on the RAT is required. Go to paragraph
4.2.2. (4).
If the RAT Turbine Assembly is listed in the effectivity of Ref.
3 Hamilton Sundstrand Service Bulletin,  the RAT Turbine
Assembly nameplate bears the symbol "29-15":
- The Ref. 3 Hamilton Sundstrand Service Bulletin has already
been applied. No further action on the RAT is required. Go to
paragraph 4.2.2. (4).
It the RAT Turbine Assembly is listed in the effectivity of Ret.
3 Hamilton Service Bulletin, and the RAT  Turbine Assembly
nameplate does not bear the  symbol "29-15":
- Replace the screws  on the RAT Turbine Assembly in accordance
with the Ref. 3 Hamilton Service Bulletin.
- Send the affected RAT Turbine Assembly to the vendor for
application of Ref. 3 Hamilton Service Bulletin.
4.  eport all inspection results to Airbus in accordance with
paragraph 7 of this AOT.
4.3 MATERIAL / TOOLING
The material necessary for this inspection is listed in the Ref. 3
Hamilton Sundstrand Service Bulletin.
Hamilton sundstrand will provide screws free of charge to the affected
operators.
The number of screws required for this inspection may vary from operator
to operator. Therefore, in order to determine the number of screws to be
ordered, operators are  requested to contact their assigned Hamilton
the responsible Administrator is not known). In addition, operators can  Sundstrand Commercial  Spares Administrator (or fax to +1-815-226-2624, if
contact the Commercial Spares group. Upon  "Customer Service"  also use the Hamilton Sundstrand website at www.hamiltonsundstrand.com to  followed by  Commercial Spares  entering the website, select  for other contact and
order processing options that are available.
5. FURTHER ACTION
No further action is requested after full accomplishment of this AOT.
6. AOT APPROVAL
The technical content of this AOT has been approved under the authority of
EASA design organisation approval number EASA.21.J.031.
It is anticipated that this  Airworthiness Directive (AD).  AOT will be rendered mandatory by an EASA
7. REPORTING / ACKNOWLEDGMENT
after receipt to:  Operators are requested to acknowledge receipt of this AOT within 48 hours
Mr. R: 435 (095 61 93 47 91  +33 (0)5
Fax: +33 (0) 5 61 93 32 73
. Page 4

### Page 5 (OCR)

Mailto: richard.lascours@airbus.com
This acknowledgement can be made through the Airbus RCSM when available.
Inspection results and questions about the technical content of this AOT
are to be addressed to:
Mr. Adrien TONON
Hydraulic Systems, SEEL4
Phone: +33 (0)5 67  19 20 35
-ax: +33 (0) 5 61 93 32 73
wailto: adrien.tonon@airbus.com
Best regards,
E. VAN AELST
VICE PRESIDENT A300 PROGRAMME
CUSTOMER SERVICES DIRECTORATE
If you receive this message via e-mail/internet, we draw your attentio
o the fact that it may be monitored and/or intercepted
Further, whilst airbus has taken reasonable measures to ensure the
integrity of this message and its contents,  or implied is given that the contents hereof conform to the original. Ir  no warranty, whether express
case of any doubt, please retrieve this document from your sita address or
the Airbus AOLS system or request that it be retransmitted by fax or
Page 5

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
