# Airbus All Operator Telex A310-53A2135

Copy: No revision named ("AOT 53A2135 00"), 3 pages: PDF https://openairdocs.org/files/sha256/57/d5/57d5b40c074679486c90a53b7e3e0dc91fedf21d52a94c6aa4597e944af7e6e3; text https://openairdocs.org/service-documents/airbus/aot-a310-53a2135/file/57d5b40c0746.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2014-0229; AD 2015-06-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Other document (All Operator Telex)
- Number: A310-53A2135
- Page: https://openairdocs.org/service-documents/airbus/aot-a310-53a2135

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2015-06-05](https://openairdocs.org/ad/2015-06-05.md), effective May 1, 2015: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/aot-a310-53a2135/proposed.md).

## Text (3 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2014-0229; AD 2015-06-05 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

ALL OPERATOR TELEX - ALL OPERATOR TELEX
SUBJECT: ATA 53 – INSPECTION OF EXISTING SRM REPAIRS ON CROSS BEAM
FLANGE AT FRAMES 11 AND 12A
OUR REF.: AOT A310-53A2135 dated 14 MAR 2012
1. AIRCRAFT AFFECTED
This AOT is applicable to all A310 models.
2. REFERENCED DOCUMENTATION
Ref.1: A310 SRM 53-12-15 PB201 figures 204, 205 and 206
3. REASON
3.1 BACKGROUND
In the frame of the Extended Service Goal (ESG) activity, all existing
SRM repairs were reviewed.
This analysis, which consisted in new static and fatigue calculations,
revealed that repairs available in Ref.1 were no longer applicable to
some specific areas.
Ref.1 was revised accordingly in 2008 to exclude these areas.
Further to the implementation of the Aging Aircraft Safety Rule (AASR)
project, it is required to inspect these SRM repairs and to perform
appropriate corrective actions.
3.2 AIM
The purpose of this AOT is to call for:
* An early one-time inspection of the cross beams flange located at:
- FR11 between Y-520 and Y+520 and outboard from Y+/-1317.5
- FR12A between Y-227.5 and Y+227.5
* The accomplishment of corrective actions if repairs previously
applied as per Ref.1 before 2008 are detected at above mentioned
locations.
4. SHORT TERM ACTION
4.1 PLANNING AND MANPOWER
4.1.1 ACCOMPLISHMENT TIMESCALE
In case of repairs previously applied as per Ref.1 at locations given in
paragraph 4.2.2, appropriate corrective actions must be embodied within
36 months from the receipt date of this AOT.
Therefore, Airbus recommend to perform the one-time inspection described
in paragraph 4.2.2 at next suitable opportunity.
The potential findings shall be reported to Airbus for detailed
analysis. Airbus will individually come back with appropriate corrective
actions.
4.1.2 MANPOWER
The manpower estimates given in this AOT are based on the direct labor
cost to do the work. These estimates assume that the work will be done
by experienced personnel, and may need to be revised upwards to suit
operator’s circumstances. The estimates do not include the time to
prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general
administration work are also not included.

### Page 2

One man-hour (MH) is required to perform the one-time inspection
described in paragraph 4.2.2.
The total MH and elapsed time (ET) required to apply the corrective
actions will depend on the inspection results and will be provided on a
case-by-case basis.
4.2 DESCRIPTION
4.2.1 JOB PREPARATION AND ACCESS
Open the avionics compartment access door located in the cockpit,
referenced in A310 IPC 53-11-21 figure 5.
4.2.2 INSPECTION INSTRUCTIONS
(1)Perform a General Visual Inspection (GVI) of the cross beams flange
located at:
* FR11 between Y-520 and Y+520 and outboard from Y+/-1317.5
* FR12A between Y-227.5 and Y+227.5
Above mentioned locations refer to the excluded areas detailed in Ref.1.
(2)If a repair, previously applied as per Ref.1 or unidentified repair
procedure, is detected at these locations, please contact Airbus to get
further instructions:
SEER1/SEER2/SEER3
Customer Services
Fax: +33 (0)5 61 93 28 73
Mailto:
- region1.StructureRepairSupport@airbus.com
- region2.StructureRepairSupport@airbus.com
- region3.StructureRepairSupport@airbus.com
(3)If no repair is detected, no further action is required.
4.2.3 JOB CLOSE UP
Close the avionics compartment access door located in the cockpit,
referenced in A310 IPC 53-11-21 figure 5.
4.2.4 TOOLING
No specific tooling is required to perform the GVI described in
paragraph 4.2.2.
5. AOT APPROVAL
The technical content of this document is approved under the authority
of DOA nr. EASA.21J.031.
6. REPORTING/ACKNOWLEDGEMENT
Operators are requested to acknowledge receipt of this AOT within 48
hours after receipt to:
Cecile BORDES, SEES
E-mail: cecile.bordes@airbus.com
Fax number: +33+ (0) 5 61 93 36 14
Questions about this AOT and inspection results with or without findings
are to be sent to Airbus Customer Services engineering as soon as
possible, after the AOT application, to the attention of:
Mr Sebastien FAURE, SEES1
Phone: +33 (0)5 61 93 31 68
Fax number +33 (0)5 61 93 36 14

### Page 3

E-mail: sebastien.s.faure@airbus.com
Best Regards,
P. BOUCHERAT
VICE PRESIDENT A300/A310/A300-600 PROGRAMME
CUSTOMER SERVICES DIRECTORATE
If you do not need to receive AOT any more, or if other people in your
organization need to be added to the distribution, please advise your
Airbus Customer Services contact accordingly.
AOT’s attachments (if any) can be downloaded from AirbusWorld via AirN@v
/ Engineering.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
