# Airbus All Operator Telex A320-29A1150

Copy: No revision named ("AOT_A320-29A1150"), 6 pages: PDF https://openairdocs.org/files/sha256/8b/b4/8bb4c8db90377b3bc2a6445848393dd0b5c7e67dc7df69cbb8c71d7d772934a8; text https://openairdocs.org/service-documents/airbus/aot-a320-29a1150/file/8bb4c8db9037.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2011-0388; AD 2011-16-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Other document (All Operator Telex)
- Number: A320-29A1150
- Page: https://openairdocs.org/service-documents/airbus/aot-a320-29a1150

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2011-16-03](https://openairdocs.org/ad/2011-16-03.md), effective Sep 9, 2011: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/aot-a320-29a1150/proposed.md).

## Text (6 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2011-0388; AD 2011-16-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

ALL OPERATORS TELEX - ALL OPERATORS TELEX
SUBJECT: ATA29 - RAM AIR TURBINE - SCREW REPLACEMENT
OUR REF: AOT A320-29A1150 dated 24 JUN 09
1. AIRCRAFT AFFECTED
This AOT applies to all A318, A319, A320 and A321 in service aircraft
equipped with Hamilton Sundstrand Ram Air Turbine (RAT): PN 762308 series
or PN 766352 series.
For A320 in service aircraft this AOT applies to:
- Aircraft Post-Mod 27189 or Post-SB 29-1100: A320 aircraft
Fitted with A319/A321 "Sundstrand Model" Ram Air Turbine are affected by
thIS AOT.
- Aircraft Pre-Mod 28413: A320 Aircraft  above MSN1050 that did
not reintroduce the "Dowty model" Ram Air Turbine are affected by this
AOT .
If still equipped with original (at time of aircraft delivery) Ram Air
Turbine, the aircraft from MSN 3867 and subsequent are not affected by
this AOT.
The Quality Survey addressed the following aircraft MSNs before delivery.
21: 102. 565 106, 597121-10 0 29 3672 3838.  As a consequence,  if the original Ram Air Turbine has not been replaced,
- MSNS: 3591,  3823, 3825, 3826,  386: 3613: 3846, 3848, 3830; 3832; 3635, 3857; 3655; 1631:  369° 382.
3838,
3863, 3866.
NOTE: It is the operator responsibility to check if the original Ram Air
Turbine is fitted  on aircraft.
2. REFERENCED DOCUMENTATION
REF 1:CMM 29-21-42, IPL Fig. 4, item 30.
REF 2:CMM 29-21-44  IP04F] "Functiona1 check of RAT Using Ground Test
REF 3:MPD Task 292000-04-1
REF 4: Hamilton Sundstrand Service Bulletin ERPS08M-29-8
REF 5:AMM Task 29-22-00-869-005  "Extension of the RAT on the Ground"
REF 6:AMM Task 29-22-51-000-010 "Removal of the RAT"
REF 7:AMM Task 29-22-51-400-010 "Installation of the RAT"
REF 8:AMM Task 29-22-00-869-006 "Retraction of the RAT on Ground"
3. REASON
3.1 FACTS
Hamilton Sundstrand has discovered that some RAT were manufactured with
non-conforming screws, Ret.  1 & 2 Hamilton Sundstrand CMMS. The purpose of
these screws is to attach the balance washer, which can have a round or a
rectangular shape depending on RAT configuration. To date there have been
five instances of a fractured balance screw on various RAT part number
contigurations. In one case, the balance washer was also tound missing.
Inspection of other screws  in Hami Iton Sundstrand stock revealec

### Page 2 (OCR)

metallographic non-conformities consistent with those of the fractured
screws. The suspect screws have been isolated to one batch from a specific
supplier.
Analysis shows the non-conformity can be a result of the supplier's
applied heat treatment process, which can increase susceptibility to
brittle fracture.
3.2 CONSEQUENCES
The applied heat treatment has resulted in a non-conforming screw
material. The affected screws are exposed to potential fracture, with
subsequent non-retention of the associated balance washer.
Detachment of the balance washer can create an unacceptable turbine
imbalance.
3.3 AIM
The aim of this AOT is to:
- Inform all A320Fam operators of the discovered nonconforming RAT
screwvide operators with the procedures to check the suspect part
balance screws when affected.  Numbers and Serial Numbers of  the In-Service/Spare RAT, and to replace the
4. SHORT TERM ACTION
4.1 AIRBUS INFORMATION REQUEST AND RECOMMENDATIONS
Airbus recommend that the actions described in paragraph 4.3. of this AOT
be carried out at the next convenient opportunity in accordance with the
following :
4.1.1 Identification of suspect RAT
From the list of Ram Air Turbine provided in Hamilton-Sundstrand SB Ref.4,
operators must identify the RAT that are in the suspect batch.
CAUTION:
If the PN/SN of a Ram Air Turbine cannot be identified, the RAT must be
considered as suspect and inspected in accordance with the instructions
provided in this AOT.
4.1.2  Inspection/replacement
For Ram Air Turbine in the suspect batch, operators are requested to do
the actions described in paragraph 4.3 within the following timescale :
- the next 3000 flight hours after receipt of this All Operators Telex,  or
whichever occurs first.  - the next 12 months after receipt of this All Operators Telex,
within this timescale, and until the screws have been replaced, operators  are allowed to use the suspect RAT:
- only once for a RAT ground test according to Ref. 3 MPD task with
specific conditions as given below,
and
- only once for an in flight RAT extension (for any cause). After this
specific case'has to be performed before next flight.  inspection/replacement of the balance screws as per
paragraph 4.3
Page 2

### Page 3 (OCR)

Any Ram Air Turbine identified with a missing screw and/or a missing
balance washer during the inspection has to be reworked immediately as per
paragraph 4.3.
WARNING:
In addition, when an operator has to perform a RAT ground test within the
given timescale and prior to screw inspection/replacement, Airbus
recommend to :
- ensure that no screws or balance washers are missing prior to the
test,
- keep all persons  away from the area and from the potential RAT
screw trajectory range during the test,
- ensure that no screws have torn out during the test and that no
screws or balance washers are missing after the test.
4.2 PLANNING AND MANPOWER
The maintenance activity related to part replacement can be completed
during an A/C overnight stop.
when screws are found in place on the turbine, Airbus estimate that a
naximum of 2 man-hours are required to gain access  replace the screws and
identify SB 29-8 accomplishment on the Ram Air Turbine.
For a Ram Air Turbine with a missing balance washer, or with a screw that
cannot be  completely removed, removal of the Ram Air Turbine from the
aircraft is required.  In this case,  a maximum of 7 man-hours are required
For replacement of the Ram Air Turbine and test on wing.
4.3 DESCRIPTION OF TASK
4.3.1. INSPECTION AND REPLACEMENT OF SCREW ON AIRCRAFT
1. Extend the Ram Air Turbine (RAT) as per Ref. 5 AMM Task.
2. Open, safety and tag these circuit breakers:
PANEL  LOCATION
106vU  CSM/G / EV / MAN / SPLY
49VU  HYD / RAT / CTL  2801GE
121vU  HYDRAULIC / RAT / SPLY  2803GE
3. Check the Part Number and Serial Number of the installed Ram Air
Turbine (RAT).
the installed RAT is not listed in the effectivity of the
Ref. 4 Hamilton Sundstrand Service Bulletin:
1) No further action on the RAT is required. Go to
paragraph 4.3.1. (4).
b. If the installed RAT is listed in the effectivity of Ref. 4
bears the symbol  Hamilton Sundstrand Service Bulletin, and the RAT nameplate  "29-8" :
1) The Ref. 4 Hamilton Sundstrand Service Bulletin has
already been applied. No further  action on the RAT is
required. Go to paragraph 4.3.1. (4).
c. If the installed RAT is listed in the effectivity of Ref. 4
Hamilton Sundstrand Service Bulletin, and the RAT nameplate does
not bear the symbol "29-g"
Page 3

### Page 4 (OCR)

1) If all screws are fitted on the turbine :
- With the RAT installed on aircraft, replace the
balance screws on the RAT in accordance with the Ref. 4
Hamilton Sundstrand Service Bulletin.
- Replace the RAT (Refer to Ref. 6 and Ref. 7 AMM Tasks)
and send the affected RAT to the vendor for application
of Ref. 4 Hamilton Sundstrand Service Bulletin.
If one or several screws  are broken and associated
balance washers are still fitted on the turbine. Before the
next flight:
- With the RAT installed on  aircraft, replace the
balance screws on the RAT in accordance with the Ref. 4
Hamilton Sundstrand Service Bulletin.
- Replace the RAT (Refer to Ref. 6 and Ref. 7 AMM Tasks)
and send the affected RAT to the vendor for application
of Ref. 4 Hamilton Sundstrand Service Bulletin.
3) one or several screws and balance washers are broken.
Before the next flight:
- Replace the RAT (Refer to Ref. 6 and Ref. 7 AMM Tasks)
and send the affected RAT to the vendor to  balance the
turbine assembly and apply the Ref. 4 Hami ton
Sundstrand Service Bulletin.
4. Remove the safety clip(s) and tag(s) and close these circuit
breakers :
PANEL  DESIGNATION  FIN  LOCATION
106VU  CSM/G / EV / MAN / SPLY  6XE  04 B
49VU  HYD / RAT / CTL  2801GE  14 D
121vU  HYDRAULIC / RAT / SPLY  2803GE  33 P
5. Retract the Ram Air Turbine (RAT) as per Ref. 8 AMM Task.
6. Report to Airbus all the inspection results in accordance with
paragraph 7
4.3.2. INSPECTION AND REPLACEMENT OF SCREWS ON SPARE RAT
1. Identify the Part Number and Serial Number of the Ram Air Turbine
(RAT) .
a. If the RAT is not listed in the effectivity of the Ref. 4
Hamilton Service  Bulletin:
- No further action on the RAT is required. Go to paragraph
4.3.2. (2).
b. If the RAT is listed in the effectivity of Ref. 4 Hamilton
Sundstrand Service Bulletin, and the RAT nameplate does bear the
symbol "29-8":
- The Ref. 4 Hamilton Sundstrand Service Bulletin has
already been applied. No further action on the RAT is
required. Go to paragraph 4.3.2. (2).
c. If the RAT is listed in the effectivity of Ref. 4 Hamilton
Page 4

### Page 5 (OCR)

S29-ge: Bulletin, and the RAT nameplate does not bear the symbol
- Replace  the balance screws on the RAT in accordance with
the Ref. 4 Hamilton Service Bulletin.
- Send the affected RAT to the vendor for application of
Ref. 4 Hamilton Service Bulletin.
2. Report to Airbus all the inspection results in accordance with
paragraph 7.
4.4. MATERIAL / TOOLING
The material necessary for this inspection is listed in the ref. 4
Hamilton Sundstrand Service Bulletin.
Hamilton Sundstrand will provide balance screws free of charge to the
affected operators.
The number of screws required for this inspection may vary from operator
to operator. Therefore,  in order to determine the number of screws to be
ordered, operators are requested to contact their assigned Hamilton
Sundstrand Commercial Spares Administrator (or fax to +1-815-226-2624, if
the responsible Administrator is not known). In addition, operators can
also use the Hamilton Sundstrand website at www.hamiltonsundstrand. com to
"Customer Service"  contact the Commercial  followed by  Spares group. Upon  Commercial Spares  entering the website, select  for other contact and
order processing options that are available.
5. FURTHER ACTION
No further action is requested after full accomplishment of this AOT.
6. AOT APPROVAL
The technical content of this AOT has been approved under the authority of
EASA design organisation approval number EASA.21.J.031.
It is anticipated this AOT will be rendered mandatory by an EASA
Airworthiness Directive (AD).
7. REPORTING / ACKNOWLEDGMENT
after receipt to:  Operators are requested to acknowledge receipt of this AOT within 48 hours
Mr. R: 4AS 0095 61 93 47 91  +33 (0)5
Fax: +33 (0)5 61 93 32 73
Mailto: richard.lascours@airbus.com
This acknowledgement can be made through the Airbus RCSM when available.
Inspection results and questions about the technical content of this AOT
are to be addressed to:
Mr. Adrien TONON
Hydraulic Systems, SEEL4
Phone: +33 (0)5 67 19 20 35
+33 (0) 5 61 93
Mailto: adrien.tonon@airbus.com
Best regards,
A. VIEILLARD
Page 5

### Page 6 (OCR)

VICE PRESIDENT A320 PROGRAMME
CUSTOMER SERVICES DIRECTORATE
If you receive this message via e-mail/internet, we draw your attention
to the fact that it may be monitored and/or intercepted.
Further, whilst airbus has taken reasonable measures to ensure the
in implied this me that the consents hero come to the reginales
case of any doubt, please retrieve this document from your sita address or
the Airbus AOLS system or request that it be retransmitted by fax or
telex.
Page 6

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
