# Airbus All Operators Transmission A32W008-16

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 01 ("AOTA32W008-16 R1"), 9 pages: PDF https://openairdocs.org/files/sha256/6d/43/6d432a32db489fb7016cf464d43bfbc3e17c0d30c7743bab561bb7e45ef2cc1d; text https://openairdocs.org/service-documents/airbus/aot-a32w008-16/file/6d432a32db48.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2018-0907; AD 2019-03-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- AOT-A32W008-16-00 with appendices ("AOT-A32W008-16-00 with appendices"), 8 pages: PDF https://openairdocs.org/files/sha256/f0/a2/f0a2df3f43a18c655e8e09fd56b900a1a733113a1d623741ebe6937823b66ba6; text https://openairdocs.org/service-documents/airbus/aot-a32w008-16/file/f0a2df3f43a1.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2016-8184, the docket of a proposed AD (Federal Register 2016-18486). Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Other document (All Operators Transmission)
- Number: A32W008-16
- Latest revision known: A32W008-16, Revision 01, dated July 30, 2018 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus/aot-a32w008-16

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2019-03-10](https://openairdocs.org/ad/2019-03-10.md), effective Mar 29, 2019: Revision 01
- [AD 2017-07-05](https://openairdocs.org/ad/2017-07-05.md), effective Apr 17, 2017: No revision named

Also cited in [2 proposed ADs](https://openairdocs.org/service-documents/airbus/aot-a32w008-16/proposed.md).

## Text (9 pages)

Revision 01, the newest copy. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2018-0907; AD 2019-03-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

CUSTOMER SERVICES DIRECTORATE
1 ROND POINT MAURICE BELLONTE
31707 BLAGNAC CEDEX FRANCE
TELEPHONE + 33 (0)5 61 93 33 33
ALERT OPERATORS TRANSMISSION - AOT
AOT ref:  A32W008-16 Rev 01 Page 1 of 5 Date: 30-JUL-2018 Date: 30-JUL-2018
© AIRBUS S.A.S. 2018. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
SUBJECT: ATA 32 – Main Landing Gear - Hinge Arm / Barrel pin inspection
AIRCRAFT TYPE: A300,A300-600
OUR REF.: A32W008-16 Rev 01 dated 30-JUL-2018.
OUR PREV. REF.: A32W008-16 Rev 00 dated 25-Feb-2016
0. REASON FOR REVISION
This AOT Rev 01 is issued to modify the compliance parameters to remove the benefit of MLG hinge 
arm / barrel pin last overhaul.
The revised paragraphs are indicated between **BEG. REV** and **END REV**.
1. AIRCRAFT AFFECTED
All A300, A300-600 & A300-600ST aircraft
2. REFERENCED DOCUMENTATION
2.1 APPENDIX
Appendix 1 - Area to be inspected
Appendix 2 - Pictures of the area to be inspected with no crack
Appendix 3 - Inspection flowchart
Appendix 4 - Reporting sheet proforma
2.2 REFERENCES
Ref 1: Aircraft Maintenance Manual 32-00-00 PB301 - Safety Precautions
Ref 2: Aircraft Maintenance Manual 32-11-00 PB701 - Main Landing Gear - Cleaning
Ref 3: Aircraft Maintenance Manual 32-11-11 PB401 – Main Landing Gear – Removal and Installation
Ref 4: A300-600 Maintenance Planning Document Task 321100-07-1
Ref 5: A300 Maintenance Planning Document Task 321112-0504-1
Ref 6: Messier Bugatti Dowty: VSB 470-32-824 / 470-32-826 / 470-32-827 as applicable
Ref 7: TFU 32.11.00.023
3. REASON
The purpose of this AOT is to request operators to do a repetitive detailed visual inspection (DET) of 
the barrel hinge arm pin internal diameter (Ref appendix 1) to ensure the absence of any visible 
crack.
3.1 FACTS
**BEG. REV**
Three cases of cracked Hinge arm / Barrel pin have been reported to Airbus:
One case in-service identified during a maintenance task
One case in-shop when MLG was returned for overhaul

### Page 2

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref:  A32W008-16 Rev 01 Page 2 of 5 Date: 30-JUL-2018 Date: 30-JUL-2018
© AIRBUS S.A.S. 2018. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
One case in-service observed during AOT A32W008-16 Rev 00 inspection
Cracks have been identified on the internal diameter of the pin.
Part numbers of the pin potentially affected are:
C66441-X series
C65543-X series
**END REV**
3.2 CONSEQUENCES
Failure of the pin could result in a MLG collapse.
3.3 AIM
The aim of this AOT is to provide operators with instructions to perform an “on-wing” repetitive detailed 
visual inspection of the hinge arm/barrel pin internal diameter to ensure the absence of visible through- 
crack.
3.4 INVESTIGATION
**BEG. REV**
The root cause of this crack has been determined and the failure scenario has been identified:
1. Vertical load of the MLG leg above certified limits, causing rupture of connecting rod bushes.
2. Modification of load distribution because of the migration of bush fragments 
3. Stress level increase at the inner diameter of the hinge arm / barrel pin.
On top of this sequence, the weakening of pin material because of hydrogen material embrittlement is 
necessary to initiate a crack on the pin and to propagate it. The origin of this hydrogen is the corrosion 
found on the outer diameter of the pins found cracked in service.
As the overhaul process used before 2016 did not systematically imply chromium removal, Airbus 
believes that potential corrosion may not have been completely removed at that time. Therefore the 
compliance of the present AOT is modified for Rev 01 to remove the benefit of last pin overhaul.
**END REV**
4. SHORT TERM ACTION
4.1 PLANNING AND MANPOWER
4.1.1 ACCOMPLISHMENT TIMESCALE
Within the compliance time specified in Table 1 of this AOT, as applicable, and thereafter at intervals 
not exceeding 100 Flights Cycles, inspect the pin in accordance with the instructions of paragraph 
4.2.2.

### Page 3

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref:  A32W008-16 Rev 01 Page 3 of 5 Date: 30-JUL-2018 Date: 30-JUL-2018
© AIRBUS S.A.S. 2018. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
**BEG. REV**
Table 1 - Initial Inspection
Compliance time: Whichever occurs later between A and B
A No later than 30 months since the pin first flight on an aircraft
B Within 30 days after the effective date of the AOT Rev 01
**END REV**
Repeat inspection every 100 Flight cycles (FC)
When visual inspection is performed, even if no findings, it must be reported within 15 days to Airbus 
using the proforma provided in appendix 4 of this AOT after each inspection.
4.1.2 MANPOWER
The manpower estimates given in this AOT are based on the direct labour cost to do the work. These 
estimates assume that the work will be done by experienced personnel, and may need to be revised 
upwards to suit operator’s circumstances. The estimates do not include the time to prepare, plan or 
inspect the work. Manufacturing and procurement of parts and tools, drying times for paints, sealants, 
etc., and general administration work are also not included.
Estimated time to perform visual inspection
- 0.5 hour elapsed time per aircraft
4.2 DESCRIPTION
4.2.1 ACCESS
The detailed visual inspection:
- does not require A/C jacking. 
- does not require any part removal.
The detailed visual inspection requires the aircraft to be placed in a maintenance configuration with 
Landing Gear safety devices installed as per Ref 1.
The detailed visual inspection requires an access platform and portable light.

### Page 4

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref:  A32W008-16 Rev 01 Page 4 of 5 Date: 30-JUL-2018 Date: 30-JUL-2018
© AIRBUS S.A.S. 2018. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
4.2.2 INSPECTION REQUIREMENTS
Refer to appendix 3 “inspection flowchart”
- Get access to the MLG Hinge arm/barrel pin using a ladder or access platform.
- Clean the inner diameter of the pin according to Ref 2.
- Without disassembly of the MLG or disconnection of the MLG door, perform a detailed visual 
inspection of the entire surface of the pin inner diameter (ID) to detect any presence of 
cracks.
- Refer to areas highlighted in the Appendices 1 & 2:
Use portable white light and mirror as necessary. 
Report any relevant findings or absence of finding and take photos of the cleaned area.
4.2.3 FINDINGS
In case of crack evidence, the complete MLG Leg has to be removed for shop inspection and 
replaced prior to next flight.
Refer to Ref 3 for MLG removal/installation.
If no crack, repeat the inspection detailed in paragraph 4.2.2 at an interval not exceeding 100 flight 
cycles (FC).
4.3 SPARES AND TOOLING
In case of spare necessary, contact:
Safran Landing Systems
Customer Support Center
aogcsc.sls@safrangroup.com
5. FURTHER INFORMATION
5.1 FOLLOW-UP PLAN
**BEG. REV**
This AOT will be cancelled and replaced, or complemented by a new set of Service Bulletin. Information 
about resolution planning will be provided through Ref 7.
**END REV**
5.2 IMPACTED DOCUMENTATION
Not applicable
6. AOT APPROVAL
The technical content of this document is approved under the authority of DOA nr. EASA.21J.031.

### Page 5

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref:  A32W008-16 Rev 01 Page 5 of 5 Date: 30-JUL-2018 Date: 30-JUL-2018
© AIRBUS S.A.S. 2018. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
7. REPORTING
Questions about this AOT are to be addressed to Airbus Customer Services through TechRequest on 
Airbus World, selecting Engineering Domain and ATA 32-11.
Inspection results with or without findings are to be addressed to Airbus Customer Services to the 
following address: inspection.results@airbus.com
Best Regards,
Jean-Luc MOUYSSET
VICE PRESIDENT ENGINEERING SUPPORT
CUSTOMER SERVICES
Olivier CRIOU
HEAD OF A300/A310 PROGRAMME & CHIEF 
ENGINEER 
CUSTOMER SERVICES

### Page 6

REFERENCE; AOT 32W008-16 
Page 1/1 
 
 
APPENDIX 1 
 
MAIN LANDING GEAR HINGE ARM / BARREL PIN INSPECTION  
AREA TO BE INSPECTED 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Fig.1: area to be inspected on MLG 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Fig.2: zone of the pin to be inspected in green 
Barrel 
MLG door 
Pin to be 
inspected 
Hinge Arm 
Pin inner 
diameter full 
circumference

### Page 7

REFERENCE; AOT 32W008-16 
Page 1/1 
 
 
APPENDIX 2 
 
MAIN LANDING GEAR HINGE ARM / BARREL PIN INSPECTION  
PICTURES OF THE AREA TO BE INSPECTED WITH NO CRACK FOR REFERENCE

### Page 8 (OCR)

REFERENCE; AOT 32W008-16
APPENDIX 3
MAIN LANDING GEAR HINGE ARM / BARREL PIN INSPECTION
INSPECTION FLOWCHART
No later than 30 months since the pin first flight on
an aeroplane
OR
Within 30 days after the effective date of this AOT
WHICHEVER OCCURS LATER
Detailed visual inspection (DET) of the
internal diameter of the barrel/hinge arm
pin to ensure absence of crack
Perform Detailed visual
inspection (DET) every  100 Flight cycles  Crack ?  YES  Before next flight,  replace the main
landing gear and
report to Airbus
NO
Return aircraft in service and report
inspection results within 15 days

### Page 9

REFERENCE; AOT 32W008-16 
Page 1/1 
 
 
APPENDIX 4 
 
MAIN LANDING GEAR HINGE ARM / BARREL PIN INSPECTION  
PROFORMA FOR REPORTING RESULTS OF THE INSPECTION 
 
Airbus requests the operator to fill in this proforma to report inspection findings even if no findings. 
It must be used as well if damage is found. In that case, please provide photographic evidence. 
 
Operator:   Aircraft MSN:   
Aircraft TSN:   Aircraft CSN:   
    
LH MLG PN:   RH MLG PN:   
LH MLG SN:   RH MLG SN:   
LH Hinge arm/Barrel pin PN:   RH Hinge arm/Barrel p in PN:   
LH Hinge arm/Barrel pin SN:   RH Hinge arm/Barrel p in SN:   
LH Pin CSN:   RH Pin CSN:   
LH PIN TSO:   RH PIN TSO:   
LH Pin CSO:   RH PIN CSO:   
Inspection Date: 
 
                                          ------/------/------------ 
  
Findings:  Yes*  No  
*In case of findings, provide more information here below 
Additional information : 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Return Proforma 
Inspection results with or without findings are to be 
addressed to Airbus Customer Services at the 
following address: 
inspection.results@airbus.com

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
