# Airbus All Operator Telex A330-29A3110

Copy: No revision named ("AOT_A330-29A3110"), 5 pages: PDF https://openairdocs.org/files/sha256/48/7f/487f047d5829c3c87473415ffe415bdc6e34e5668c7195aea72fce34c6828e52; text https://openairdocs.org/service-documents/airbus/aot-a330-29a3110/file/487f047d5829.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2011-0388; AD 2011-16-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Other document (All Operator Telex)
- Number: A330-29A3110
- Page: https://openairdocs.org/service-documents/airbus/aot-a330-29a3110

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2011-16-03](https://openairdocs.org/ad/2011-16-03.md), effective Sep 9, 2011: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/aot-a330-29a3110/proposed.md).

## Text (5 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2011-0388; AD 2011-16-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

ALL OPERATORS TELEX - ALL OPERATORS TELEX
SUBJECT: ATA29 - RAM AIR TURBINE - SCREW REPLACEMENT
OUR REF: AOT A330-29A3110 dated 01 SEP 2009
1. AIRCRAFT AFFECTED
This AOT applies  Sundstrand Ram Air Turbine (RAT) Turbine-Lower Gearbox Assembly PN 766542  series and PN 1701401 series.  to all A330 in service aircraft equipped with Hamilton
NOTE: Operators have to distinguish the Ram Air Turbine (RAT) Module from
the RAT Turbine-Lower Gearbox Assembly sub-assembly.
[f still equipped with the original RAT Turbine-Lower Gearbox Assembl!
rom delivery, aircraft MSN 1024 and subsequent are not affected by this
A Quality suoy y dressed the following aircraft MaNs before deliv 1003.  As sentequencao pen reblaced in service, the above-listed airera t nishe  994, 1010%  990, 9911, 1013, 1018, 1019, 1020, 1021, 1023. AS  Turbine-Lower Gearbox
are not affected by this AOT.
NOTE: It is the operator's responsibility to check if the original RAT
Turbine-Lower Gearbox Assembly is still fitted on aircraft.
2. REFERENCED DOCUMENTATION
Unit" (MPD Task 292400-03)  REF 2:AMM TASK 29-24-00-720-801 "Functional Check of RAT Using Ground Test
REF 3: Hamilton Sundstrand Service Bulletin ERPS06G-29-6
REF 4:AMM Task 29-24-00-869-801  'Extension of the RAT on the Ground"
Assembly"  REF 5:AMM Task 29-24-54-000-801 Removal of the RAT Turbine-Lower Gearbox
REF 6:AMM Task 29-24-54-400-801 Installation of the RAT Turbine-Lower  Gearbox Assembly"
REF 7:AMM Task 29-24-00-869-802 "Retraction of the RAT on Ground"
3. REASON
3.1 FACTS
Hamilton Sundstrand has discovered that some RAT were manufactured with
non-conforming screws, Ret.  1 Hamilton Sundstrand CMM. The purpose of
these screws is to attach the balance washers, which can have a round or a
rectanqular shape depending on RAT confiquration. To date there have beer
five instances of a fractured balance screw on various RAT part number
contigurations. In one case, the balance washer was also tound missing.  Inspection of other screws in Hamilton Sundstrand  stock revealed
metallographic non-conformities  consistent with those of the fractured
The suspect screws have been isolated to one batch from a specific
applied heat treatment process, which can increase susceptibility to  Analysis shows the non-conformity can be a  result of the supplier's

### Page 2 (OCR)

brittle fracture.
3.2 CONSEQUENCES
The applied heat treatment has resulted in a non-conforming screw
material. The affected screws are exposed to potential fracture, with
subsequent non-retention of the associated balance washer.
Detachment of the balance washer can create an unacceptable turbine
imbalance.
3.3 AIM
The aim of this AOT is to:
- Inform all A330 operators of the discovered nonconforming RAT screws,
- Provide operators with a procedure to check the suspect Part Numbers and
Serial Numbers of the In-Service/Spare RAT Turbine Lower Gearbox
Assemblies, and to replace the balance screws when affected.
per Ref.2  - Provide operators with recommendations prior to any RAT ground test as
4. SHORT TERM ACTION
4.1 AIRBUS RECOMMENDATION
Airbus recommend that the actions described in paragraph 4.3. of this AOT
following :  be carried out at the next convenient opportunity in accordance with the
4.1.1  Identification of suspect RAT
From the list of RAT Turbine-Lower Gearbox Assemblies provided in
Hamilton-Sundstrand SB Ref. 3, operators must identify the RAT that are in  the suspect batch.
CAUTION:
If the PN/SN of a RAT Turbine-Lower Gearbox Assembly  the RAT must be considered as suspect and inspected in accordance with the  cannot be identified,
instructions provided in this AOT paragraph 4.3.1.
4.1.2  Inspection/replacement
are requested to do the actions described in paragraph 4.3 within the  For RAT Turbine-Lower Gearbox Assemblies in the suspect batch, operators
following timescale:
- the next 3000 flight hours after receipt of this All Operators Telex,
or  - the next 8 months after receipt of this All operators Telex,
- before carrying  out a RAT ground test as per Ref.2.
whichever occurs first.
Any RAT Turbine Lower Gearbox Assembly identified with a missing screw
and/or a missing balance washer during the inspection has to be reworked  immediately as per paragraph 4.3.
4.2 PLANNING AND MANPOWER
When screws  are found in place on the turbine, Airbus estimate that a
Lower Gearbox Assembly.  maximum of 2 man-hours are required to gain  identify Hamilton Sundstrand SB Ref. 3 accomplishment on the RAT Turbine-  access, replace the screws and
For a RAT Turbine-Lower Gearbox Assembly with a missing balance washer, or
Page 2

### Page 3 (OCR)

screw that cannot be completely removed,  removal of the RAT
Turbine-Lower Gearbox Assembly from the aircraft is required. In this
case, a maximum of 6 man-hours are required for replacement of the RAT
Turbine-Lower Gearbox Assembly and test on wing.
4.3 DESCRIPTION OF TASK
4.3.1. INSPECTION AND REPLACEMENT OF BALANCE SCREWS ON AIRCRAFT
1.  Extend the Ram Air Turbine (RAT) as per Ref. 4 AMM Task.
2.  Open, safety and tag these circuit breakers:
PANEL  DESIGNATION  FIN  LOCATION
721VU  HSMU B + PART G  6JG  10 U
722VU  HSMU Y + PART G  7JG  46 X
742VU  RAT STOW CTL  1JR  77 D
742VU  HYD RAT EXT SOL 2  SJR  76 D
742VU  RAT MAN ON  2JR  74 K
3.  If the RAT Turbine-Lower Gearbox Assembly is not listed in the
effectivity of the Ref. 3 Hamilton Sundstrand Service Bulletin:
a) No further action on the RAT is required. Go to paragrapr
4.3.1. (6).
"29-6":  the RAT Turbine-Lower Gearbox Assembly nameplate bears the  Affectivity of Ref. 3 Hamilton Sundstrand Service Bulletin, and  It the RAT Turbine-Lower Gearbox Assembly is listed in the  symbol
a) The Ref. 3 Hamilton Sundstrand Service Bulletin has already
been applied. No further action on the RAT is required. Go to
paragraph 4.3.1. (6).
the effectivity of Ref. 3 Hamilton Sundstrand service Bes etin,  and the RAT Turbine-Lower Gearbox Assembly nameplate does not  If the installed RAT Turbine-Lower Gearbox Assembly is listed in
bear the symbol "29-6":
a) If all the balance screws are fitted on the turbine. within
the timescale given in paragraph 4.1.2.:
- with the RAT installed on aircraft, replace all the balance
screws on the RAT Turbine-Lower Gearbox Assembly in accordance
vith the Ref. 3 Hamilton Sundstrand Service Bulletin
- Replace the RAT Turbine-Lower Gearbox Assembly (Refer to
Ref. 5 and Ref. 6 AMM Tasks) and send the affected RAT
Turbine-Lower Gearbox Assembly to the vendor for application
of Ref. 3 Hamilton Sundstrand Service Bulletin.
b) If one or several screws are broken and the associated balance
washers are still fitted on the turbine. Before the next flight:
SE the Ref. e Hameleon sunst and service Bullet a coreane
- Replace the RAT Turbine-Lower Gearbox Assembly (Refer to
Ref.  5 and Ref. 6 AMM Tasks) and send the affected RAT
Turbine-Lower Gearbox Assembly to the vendor for application
of Ref. 3 Hamilton Sundstrand Service Bulletin.
c) If one or several screws and balance washers are broken, then  before next flight:
Page 3

### Page 4 (OCR)

- Replace the RAT Turbine-Lower Gearbox Assembly (Refer to
5 and Ref. 6 AMM Tasks) and send the affected RAT
Turbine-Lower Gearbox Assembly to the vendor to balance the
turbine assembly and apply the Ref. 3 Hamilton Sundstrand
Service Bulletin.
Remove the safety clip(s) and tag(s) and close these circuit
breakers:
PANEL  DESIGNATION  FIN  LOCATION
721VU  HSMU B + PART G  6JG  10 U
722VU  HSMU Y + PART G  7JG  46 x
742VU  RAT STOW CTL  1JR  77 D
742VU  HYD RAT EXT SOL 2  SJR  76 D
742VU  RAT MAN ON  2JR  74 K
Retract the Ram Air Turbine (RAT) as per Ref. 7 AMM Task.
8.  Report all inspection results to Airbus in accordance with
paragraph 7 of this AOT.
4.3.2. INSPECTION AND REPLACEMENT OF SCREWS ON SPARE RAT
If the RAT Turbine-Lower Gearbox Assembly is not listed in the
effectivity of the Ref. 3 Hamilton Service Bulletin:
- No further action on the RAT is required. Go to paragraph
4.3.2. (4).
2.  If the RAT Turbine-Lower Gearbox Assembly is listed in the
effectivity of Ref. 3 Hamilton Sundstrand Service Bulletin, and
"29-6":  the RAT Turbine-Lower Gearbox Assembly nameplate bears the symbol
- The Ref.  3 Hamilton Sundstrand Service Bulletin has already
been applied. No further action on the RAT is required. Go to
paragraph 4.3.2. (4).
effectivity of Ref. 3 Hamilton Service Bulletin, and theheAs  Turbine-Lower Gearbox Assembly nameplate does not bear the symbol  If the RAT Turbine-Lower Gearbox Assembly is listed in the
- Replace  Assembly in accordance with the Ref. 3 Hamilton Service Bulletin.  all the balance  Screws on the RAT Turbine-Lower Gearbox
- Send the affected RAT Turbine-Lower Gearbox Assembly to the
vendor tor application of Ref. 3 Hamilton Service Bulletin.
Report all inspection results to Airbus in accordance with
paragraph 7 of this AOT.
4.4 MATERIAL / TOOLING
Hamilton Sundstrand Service Bulletin.  The material necessary for this inspection is listed in the Ref. 3
affected operators.  Hamilton Sundstrand will provide balance screws free of charge to the
to operator. Therefore,  The number of screws required for this inspection may vary from operator  in order to determine the number of screws to be
ordered, operators are requested to contact their assigned Hamilton
Sundstrand Commercial Spares Administrator (or fax to +1-815-226-2624, if
the responsible Administrator is not known). In addition, operators can
also use the Hamilton Sundstrand website at www.hamiltonsundstrand. com to
contact the Commercial Spares group. Upon entering the website, select

### Page 5 (OCR)

"Customer Service" followed by "Commercial spares" for other contact and
order processing options that are available.
5. FURTHER ACTION
No further action is requested after full accomplishment of this AOT.
6. AOT APPROVAL
EASA design.  The technical content  organisation approval number EASA.21.J.031.  of this AOT has been approved under the authority of
Airworthiness Directive (AD).  It is anticipated that this AOT will be rendered mandatory by an EASA
7. REPORTING / ACKNOWLEDGMENT
Operators are requested to acknowledge receipt of this Aot within 48 hours  after receipt to:
Phone: +33 (095 65 93 47 91
Fax: +33 (0)5 61 93 32 73
Mailto: richard.lascours@airbus.com
This acknowledgement can be made through the Airbus RCSM when available.
Inspection results and questions about the technical content of this AOT  are to be addressed to:
Mr. Adrien TONON
Hydraulic Systems,
Phone: +33  (0) 5 67 19 20 35
Fax: +33 (0)5 61 93 32 73
Mailto: adrien.tonon@airbus.com
Best regards,
J. GROTHER
VICE PRESIDENT A330/A340 PROGRAMME
CUSTOMER SERVICES DIRECTORATE
'If you receive this message via e-mail/internet, we draw your attention  to the fact that it may be monitored and/or intercepted.
integrity of this message and its contents,  Further, whilst airbus has taken reasonable measures to ensure the  or implied is given that the contents hereof conform to the original. Ir  no warranty, whether express
case of any doubt, please retrieve this document from your sita address or
the Airbus AOLS system or request that it be retransmitted by fax or
Page 5

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
