# Airbus All Operators Transmission A330-32A-3256

## Copies (3)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 01 ("U.S. DOT/FAA - AOT A330-32A-3256 R01"): File https://openairdocs.org/files/sha256/20/48/2048435786d8c1ea754e5467d0e73e758252267d141276518d3375440cc78a17; text https://openairdocs.org/service-documents/airbus/aot-a330-32a3256/file/2048435786d8.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2012-0810; AD 2013-08-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 01 ("U.S. DOT/FAA - AOT A330-32A-3256 R01"), 5 pages: PDF https://openairdocs.org/files/sha256/8a/ef/8aef75e5b513cd6bdbcf4329991b9a070aa248fffa814fe887977cb0e3264942; text https://openairdocs.org/service-documents/airbus/aot-a330-32a3256/file/8aef75e5b513.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2012-0810; AD 2013-08-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 01 ("U.S. DOT/FAA - APPENDIX -1 AOT A330-32A-3256"), 11 pages: PDF https://openairdocs.org/files/sha256/a9/34/a934d3d4af17065d07e2be8ac52638a3ccdffc35644e1e9bb44c8fa6148a20f6; text https://openairdocs.org/service-documents/airbus/aot-a330-32a3256/file/a934d3d4af17.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2012-0810; AD 2013-08-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Other document (All Operators Transmission)
- Number: A330-32A-3256
- Latest revision known: A330-32A-3256, Revision 01, dated October 18, 2012 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus/aot-a330-32a3256

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2013-08-03](https://openairdocs.org/ad/2013-08-03.md), effective May 23, 2013: Revision 01

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/aot-a330-32a3256/proposed.md).

## Text (5 pages)

Revision 01, the newest copy. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2012-0810; AD 2013-08-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

ALERT OPERATORS TRANSMISSION - ALERT OPERATORS TRANSMISSION
AIRBUS CUSTOMER SERVICES
SUBJECT: ATA 32 - MAIN LANDING GEAR (MLG) - WHEEL AXLE REPAIR ISSUE.
OUR REF.:  AOT A330-32A-3256 REVISION 01 dated 18 October 2012.
OUR PREV. REF.:  AOT A330-32A-3256 dated 23 August 2011.
0. REASON FOR REVISION
This AOT is being revised to add wheel axle serial numbers in the APPENDIX 1 PART 1 
"List of affected part and serial numbers". 
Airbus has been notified that an additional number of MLG wheel axles currently in service 
have been subject to repairs by REVIMA, leading to a reduced fatigue life. The affected part 
numbers (P/N) are:
- Basic or Growth MLG wheel axle P/N 201272649 (Post [REF 1] or [REF 2]) 
Also, a wheel axle S/N was incorrectly listed in the previous revision of the APPENDIX 1 
PART 1 and has been corrected. This issue was discovered during the axle replacement 
program. The operator was contacted about this issue. 
The revised paragraphs are indicated between **BEG. REV** and **END REV**.
1. AIRCRAFT AFFECTED
A330 Aircraft fitted with Basic or Growth Main Landing Gears only.
2. REFERENCED DOCUMENTATION
2.1 APPENDICES
**BEG. REV**
APPENDIX 1 PART 1 REVISION 1: List of affected part and serial numbers.
**END REV**
APPENDIX 1 PART 2: On-wing wheel axle replacement procedure.
2.2 REFERENCES
REF 1: Messier-Bugatti-Dowty (MBD) VSB A33/34-32-193 revision01 - MLG - Introduction 
of a new axle with better corrosion resistance (Basic MLG).
REF 2: MBD VSB A33/34-32-194 - MLG - Introduction of a new axle with better corrosion 
resistance (Growth MLG).
REF 3: MBD CMM 32-11-74 - Bogie assembly (Basic MLG).
REF 4: MBD CMM 32-12-05 - Bogie assembly (Growth MLG).

### Page 2

REF 5: MBD VSB A33/34-32-300 original issue - MLG - Bogie & Dressing - Axle removal 
and installation using Enerpac equipment.
REF 6: AMM 32-41-11 PB 401 - MLG WHEEL REMOVAL / INSTALLATION.
REF 7: MBD SL A33-34 A16 - Disposal of scrap aircraft parts.
3. REASON
The purpose of this AOT is:
- to advise A330 operators that a number of Basic and Growth Main Landing Gear (MLG) 
wheel axles have been subject to repairs leading to a reduced fatigue life. All affected wheel 
axles are listed in APPENDIX 1 PART 1. 
- to require operators to perform a one-time identification of all A330 wheel axles. 
- to require operators to replace wheel axles listed in APPENDIX 1 PART 1 with a 
serviceable part in compliance with life limits and timescales as defined in paragraph 4.1.1. 
The APPENDIX 1 PART 2 provides the procedure to follow for on-wing wheel axle 
replacement. 
3.1 DESCRIPTION
Airbus has been notified that a number of MLG wheel axles currently in service have been 
subject to repairs by a Maintenance Repair Organisation (MRO) agency, REVIMA, leading to 
a reduced fatigue life. The affected part numbers (P/N) are:
- Basic or Growth MLG wheel axle P/N 201272638  or P/N 201272644 (Pre [REF 1] or [REF 
2]) and P/N 201272649 (Post [REF 1] or [REF 2]) 
- Growth MLG wheel axle P/N 201485601 (Pre [REF 2]) and P/N 201485615 (Post [REF 2]) 
Between 2002 and October 2010, affected wheel axles have been repaired to repair 2.1 & 2.3 
as per [REF 3] and [REF 4] by machining with a blend radius that may have a detrimental 
effect on the fatigue lives of these parts. The repair blend radius issue is located on the wheel 
axle centre journal. Reduced fatigue life limits are defined in paragraph 4.1.1. The date at 
which each affected wheel axle was repaired are shown in APPENDIX 1 PART 1.
3.2 CONSEQUENCES
MLG wheel axle is a Principal Structural Element (PSE) listed in Airworthiness Limitation 
Section (ALS) Part 1, the failure of which constitutes an unsafe condition. As such the 
affected wheel axles must be removed from service before reaching the life limits and 
timescales as defined in paragraph 4.1.1.
3.3 AIM
The aim of this AOT is to ensure continued airworthiness of the MLG wheel axles by 
requiring operators:
- to identify from aeroplane maintenance records and/or by physical inspection, the part and 
serial number of all their A330 Basic and Growth MLG wheel axles currently fitted on 
aircraft and available as spares 
- to check if any are listed in APPENDIX 1 PART 1. If an axle is listed, it must be removed 
from service before reaching the life limits and timescales as defined in paragraph 4.1.1.
Note: It is not possible to carry out any further repair of the affected wheel axles to improve 
or to restore their fatigue lives. Therefore all the listed wheel axles will have to be scrapped.

### Page 3

4. SHORT-TERM ACTIONS
4.1 PLANNING AND MANPOWER
4.1.1 ACCOMPLISHMENT TIMESCALES
Identification of all A330 MLG wheel axle part and serial numbers should be performed no 
later than 90 days after this AOT issue date and send to Airbus.
For all MLG wheel axles listed in APPENDIX 1 PART 1, Airbus requires their replacement 
with a serviceable part before reaching the life limits and timescales specified in (a) or (b) 
indicated below, whichever occurs later: 
a) Before the accumulation of the Landings (LDG) or Flight Hours (FH), whichever occurs 
first, defined in Table 1, as applicable to the aeroplane type and model,
Table 1 - MLG wheel axle life limit
--------------------------------------------------------------------------------------------------
Affected aeroplanes                      - From wheel axle post repair installation  
A330-2xx WV02x / WV05x / WV06x - 4 450 LDG or 17 900 FH
A330-3xx WV00x / WV01x - 5 050 LDG or 15 200 FH
A330-3xx WV02x / WV05x - 5 150 LDG or 13 450 FH
--------------------------------------------------------------------------------------------------
**BEG. REV**
b) No later than 20th of September 2013 without exceeding the LDG or FH, whichever occurs 
first, defined in Table 2, as applicable to the aeroplane type and model.
**END REV**
Table 2 - MLG wheel axle LDG or FH not to be exceeded
--------------------------------------------------------------------------------------------------
Affected aeroplanes                      - From wheel axle post repair installation  
A330-2xx WV02x / WV05x / WV06x - 7 410 LDG or 29 830 FH
A330-3xx WV00x / WV01x - 8 410 LDG or 25 330 FH
A330-3xx WV02x / WV05x - 8 580 LDG or 22 580 FH
--------------------------------------------------------------------------------------------------
Note : the date of repair of the affected wheel axles are identified in Appendix 1 Part 1.
4.1.2 MANPOWER
Manpower, man hours and elapsed time are defined in [REF 5] for the on-wing wheel axle 
replacement.
4.2 DESCRIPTION
4.2.1 IDENTIFICATION OF WHEEL AXLES
Check the LH and RH MLG forward and aft wheel axle part and serial numbers:
- from aeroplane maintenance records and/or
- physically on aircraft, the P/N and S/N are engraved on one of the wheel axle ends, on the 
external diameter and outboard of the wheel axle nut thread. To gain access to this area, the

### Page 4

hub-cap and the wheel axle nut have to be removed (refer to [REF 6] AMM task for removal / 
installation of the wheel axle nut).
If the wheel axle is listed in the APPENDIX 1 PART 1, then it must be removed in 
accordance with the procedure given in paragraph 4.2.2 before reaching the life limits and 
timescales defined in paragraph 4.1.1. 
If the wheel axle part number/serial number is not listed in APPENDIX 1 PART 1, no further 
action is required.
4.2.2 WHEEL AXLE REPLACEMENT PROCEDURE
On-wing wheel axle replacement can be performed as per AOT APPENDIX 1 PART 2.
Bogie Beam fitted with affected wheel axles that are not currently fitted on aircraft, i.e. on 
spare MLG or sub-assembly level, have to  be replaced as per [REF 3] or [REF 4] or [REF 5]  
by a serviceable part before reaching the life limits and timescales specified in paragraph 
4.1.1.
All the listed wheel axles and/or out of compliance to paragraph 4.1.1 when removed from 
service must be disposed and scrapped in accordance with [REF 7]. Scrap certificate as per 
appendix A [REF 7] must be sent back to MBD.    
4.3 SPARES and TOOLING
Spare wheel axles have been provisioned to support this replacement program. Also, on-wing 
wheel axle replacement tooling kits are available to support this program.
Airbus recommends operators to contact REVIMA to organise the necessary wheel axle 
replacement including tooling at the following e-mail address: 
revima.onwingassistance@revima.fr
5. FURTHER RECOMMENDATION
Airbus recommends operators and MRO agencies to perform all future wheel axle repairs in 
accordance with the latest revision of [REF 3] and [REF 4].
6. AOT APPROVAL
The technical content of this AOT has been approved under EASA Design Organisation 
Approval EASA.21J.031.
**BEG. REV**
This AOT REVISION 01 will be rendered mandatory by an EASA Airworthiness Directive.
**END REV**
7. REPORTING/ACKNOWLEDGEMENT
Operators are requested to acknowledge receipt of this AOT within 48 hours after receipt to:
Mrs. L. BONNET, SEEL
E-mail:  laetitia.bonnet@airbus.com
Fax:     +33 (0) 5 67.19.12.05
Questions about the technical content of this AOT are to be addressed to:

### Page 5

Mr. Sébastien Mathevet, SEEL3,
Phone: +33(0) 5 61.93.85.75
Fax:     +33(0) 5 67.19.12.05
E-mail: sebastien.mathevet@airbus.com
Best regards.
Jean-luc MOUYSSET                                       Philippe GOURDON
VICE PRESIDENT ENGINEERING SUPPORT      VICE PRESIDENT 
A330/A340PROGRAMME
CUSTOMER SERVICES                                    CUSTOMER SERVICES

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
