# Airbus All Operators Telex A330-34A3235

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 02 ("U.S. DOT/FAA - AOT A330-34A3235 Rev 02"), 5 pages: PDF https://openairdocs.org/files/sha256/33/f0/33f0d032698d298cb1170fa5c0c3eee0e1cf0f2eeb4f0601d953fde1efa8ca79; text https://openairdocs.org/service-documents/airbus/aot-a330-34a3235/file/33f0d032698d.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2012-0273; AD 2012-06-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 02 ("U.S. DOT/FAA - AOT A330-34A3235 Rev 02"): File https://openairdocs.org/files/sha256/ab/8b/ab8b9b58c6c52b31a5a0af716c5323ba7446011bc795112c89ea30b7c31063ae; text https://openairdocs.org/service-documents/airbus/aot-a330-34a3235/file/ab8b9b58c6c5.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2012-0273; AD 2012-06-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Other document (All Operators Telex)
- Number: A330-34A3235
- Latest revision known: A330-34A3235, Revision 02, dated March 1, 2010 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus/aot-a330-34a3235

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2012-06-07](https://openairdocs.org/ad/2012-06-07.md), effective Apr 6, 2012: Revisions 1 and 02
- [AD 2010-17-02](https://openairdocs.org/ad/2010-17-02.md), effective Sep 22, 2010: Revision 02

## Text (5 pages)

Revision 02, the newest copy. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2012-0273; AD 2012-06-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

ALL OPERATORS TELEX – ALL OPERATORS TELEX
SUBJECT: ATA 34 - PITOT PROBE 0851HL - LOOSE PNEUMATIC QUICK-DISCONNECT 
UNION
OUR REF: AOT A330-34A3235 REV 02 dated 01 MARCH 2010
OUR PREV/REF:
AOT A330-34A3235 dated 10 SEPT 2009
AOT A330-34A3235 REV 01 dated 21 SEPT 2009
0. REASON FOR REVISION
The aim of this AOT revision is to inform operators about the terminating 
action for affected probes held as spares.
This AOT revision includes instructions to identify a Goodrich Pitot 
probe that has already had the torque check performed and therefore 
requires no further action under this AOT.
The revised paragraphs are indicated by: **BEG REV** and **END REV**.
1. AIRCRAFT AFFECTED
**BEG REV**
All A330 fitted with Goodrich Sensors Integrated Systems (Rosemount) 
Pitot probes P/N 0851HL with Serial Numbers from 267328 THRU 270714 
(inclusive).
Pitot probes currently fitted on aircraft, which have already been 
checked per the previous revision of this AOT, do not need re-checking.
**END REV**
2. REFERENCED DOCUMENTATION
Ref 1 SB A330-34-3231
Ref 2 AMM TASK 34-11-15-000-801
Ref 3 AMM TASK 34-11-15-400-801
Ref 4 RIL SEOT2 916.0253/09
**BEG REV**
Ref 5 CMM GOODRICH 34-11-09, Revision 3, OCT 2009
Ref 6 AD 2009-0202-E
**END REV**

### Page 2

3. REASONS
3.1 FACTS
Several operators have reported loose pneumatic quick disconnect unions 
on Goodrich Pitot probes P/N 0851HL, as per SB Ref 1 and RIL Ref 4. 
Airbus suspects a batch quality issue due to increased production rate.
3.2 CONSEQUENCES
A loose pneumatic quick-disconnect union could lead to an air leak and 
potentially incorrect total pressure measurement.
**BEG REV**
However, further investigations have shown that an under-torqued probe 
would not leak (torque value lower than the one specified in CMM Ref 5).
3.3 AIM
The aim of this AOT revision is to provide operators with the updated 
procedure to apply to Pitot probes P/N 0851HL with Serial Numbers from 
267328 THRU 270714 (inclusive) that are still held in stock as spares.
4. SHORT-TERM ACTION
Category A: Pitot probes P/N 0851HL in the effectivity of this AOT and 
installed on aircraft have been checked as per AOT A330-34A3235 Revision 
1 dated 21 SEPT 2009. No further action is required for these probes as 
long as they remain installed on aircraft. Once removed from aircraft, 
pitot probes shall be treated as indicated in category B prior to re-
installation on aircraft.
Category B: For Pitot probes P/N 0851HL in the effectivity of this AOT 
that are still held as spares or have been removed from aircraft, as per 
category A, check the interface of the quick disconnect union and the 
union mount for red torque check indicating mark:
- If a torque check indicating mark is present and intact, the pitot 
probe may be installed on aircraft with no further action required.
- If no torque check indicating mark is present or if it is compromised, 
either:
* Apply CMM Ref 5 instructions to check and adjust (if necessary) the 
torque of the quick-disconnect union and apply (or re-apply) a red torque 
check indicating mark as per the Check Section of Goodrich CMM Ref 5.
Or
* Install the pitot probe on aircraft as per AMM Ref 3 and perform a 
torque check of the pneumatic quick-disconnect union (in accordance with 
the procedure in para 4.2 of this AOT) just after installation on 
aircraft and before next flight.
4.1 PLANNING AND MANPOWER

### Page 3

4.1.1 ACCOMPLISHMENT TIMESCALE
The torque check of the pneumatic quick-disconnect union should have been 
done within 5 days of reception of the original issue of this AOT dated 
10 SEPT for those Pitot probes fitted on aircraft.
For those Pitot probes held as spares:
- Ref 5 CMM application shall be done before installation on aircraft
Or
- Pitot probes shall be installed provided the procedure described in 
para 4.2 of this AOT is done before next flight after installation on 
aircraft.
4.1.2 MANPOWER
The elapsed time necessary to check the quick disconnect coupling 
connection as required by par 4.2 of this AOT is:
- 30 minutes for one person to check 3 Pitot probe on one aircraft plus 5 
minutes for another person for visual check of quick-disconnect coupling 
connection.
- 10 minutes for 1 person to check in shop 1 Pitot probe held as spare.
4.2 DESCRIPTION
4.2.1 TORQUE CHECK
For each Pitot probe that needs to be checked on aircraft (no torque 
check mark present or AOT rev 1 not applied), apply the following 
procedure:
- Disconnect the quick-disconnect coupling from each Goodrich probe (as 
per Ref 2)
- Gradually torque the quick-disconnect union fitted on the probe to 4.9 
ft-lbs / 0.66 daN.m while using a restraining wrench on the mating hex to 
oppose the applied torque.
- If the connector nut does not rotate for a torque lower or equal to 4.9 
ft-lbs / 0.66 daN.m, it is correctly torqued and no further action is 
required.
- If the connector nut does rotate for a torque lower or equal to 4.9 ft-
lbs / 0.66 daN.m, it is not sufficiently torqued. In this case, continue 
applying torque to reach 6 ft.lbs / 0.81 daN.m, again using a restraining 
wrench on the mating hex to oppose the applied torque.
- Re-connect the quick-disconnect coupling to the Pitot probe.
- Make sure that you can see the blue ring on the quick-disconnect 
coupling (as per Ref 3)
- Pull the quick-disconnect coupling to make sure that it is correctly 
installed.
- Make sure that a second qualified mechanic does a visual inspection of 
the quick disconnect coupling connection. The two mechanics must sign off 
the job.
4.2.2 RED TORQUE CHECK INDICATING MARK APPLICATION

### Page 4

A torque check indicating mark can be applied as per the following 
procedure:
- apply a small amount of marking paint (colour: red) to the interface of 
the air fitting and the air-fitting mount 
- air dry for one hour.
5. FURTHER ACTION
N/A
6. AOT APPROVAL
The technical content of this AOT has been approved under EASA Design 
Organisation Approval EASA.21J.031.
It is anticipated that corresponding EASA Airworthiness Directive (AD Ref 
6) will be modified accordingly.
**END REV**
7. RECORDING/ACKNOWLEDGMENT
Operators are requested to acknowledge receipt of this AOT revision to:
Mr R. LASCOURS, SEE
E-mail: richard.lascours@airbus.com
Fax number: +33/(0)5 61 93 32 73
Within 10 days after receipt. This acknowledgement can be made through 
the Airbus RCSR office when available.
Questions about the technical content of this AOT are to be addressed to:
Mr Antoine BOUYER
Phone: +33/(0)5 67 19 73 65
Fax: +33/(0)5 61 93 44 25
E-mail: antoine.bouyer@airbus.com
Best regards,
John GROTHER
VICE PRESIDENT A330/A340 PROGRAMME
CUSTOMER SERVICES DIRECTORATE
If you receive this message via e-mail/internet, we draw your attention 
to the fact that it may be 
monitored and/or intercepted. Further, whilst Airbus has taken reasonable 
measures to ensure the 
integrity of this message and its contents, no warranty, whether express 
or implied is given that the 
contents hereof conform to the original. In case of any doubt, please, 
retrieve this document from your 
SITA address or the AirbusWorld or request that it be retransmitted by 
fax or telex.

### Page 5

(No text on this page.)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
