# Airbus All Operator Telex A340-29A4085

Copy: No revision named ("AOT A340-29A4085"), 5 pages: PDF https://openairdocs.org/files/sha256/80/8a/808a762776810ed1ddc8fc1dc43bf081534e63807186d2a5d986c843210b1c84; text https://openairdocs.org/service-documents/airbus/aot-a340-29a4085/file/808a76277681.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2011-0388; AD 2011-16-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Other document (All Operator Telex)
- Number: A340-29A4085
- Page: https://openairdocs.org/service-documents/airbus/aot-a340-29a4085

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2011-16-03](https://openairdocs.org/ad/2011-16-03.md), effective Sep 9, 2011: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/aot-a340-29a4085/proposed.md).

## Text (5 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2011-0388; AD 2011-16-03 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

ALL OPERATORS TELEX - ALL OPERATORS TELEX
SUBJECT: ATA29 - RAM AIR TURBINE - SCREW REPLACEMENT
OUR REF: AOT A340-29A4085 dated 01 SEP 2009
1. AIRCRAFT AFFECTED
AOT applies to all A340-200/300 in service aircraft equipped with
Hamilton Sundstrand Ram Air Turbine (RAT) Turbine-Lower Gearbox Assembly
PN 766542 series and PN 1701401 series.
NOTE: Operators have to distinguish the Ram Air Turbine (RAT) Module from
the RAT Turbine-Lower Gearbox Assembly sub-assembly.
He del very, at erate man 102 and subsequent are not artex eas by this
A Quality Survey addressed the following aircraft MSNs before delivery,  MSNS 988,  994, 1010,
1006, 1007, 1008, 1009,
a consequence, if the original Ram Air Turbine
Assembly has not been replaced in service, the above-listed aircraft MSNs
are not affected by this AOT.
NOTE: It is the operator's responsibility  to check if the original RAT
Turbine-Lower Gearbox Assembly is still  fitted on aircratt.
2. REFERENCED DOCUMENTATION
REF 1:CMM 29-21-45,  2: AMM 795k 29-24-00-520-801 "Functional Check oF RAT Using Ground Test
(MPD Task 292400-03)
REF 3: Hamilton Sundstrand Service Bulletin ERPS06G-29-6
REF 4:AMM Task 29-24-00-869-801  "Extension of the RAT on the Ground"
REF 5:AMM Task 29-24-54-000-801 "Removal of the RAT Turbine-Lower Gearbox
Assembly"
REF 6:AMM Task 29-24-54-400-801 Installation of the RAT Turbine-Lower
Gearbox Assembly
REF 7:AMM Task 29-24-00-869-802 'Retraction of the RAT on Ground"
3. REASON
3.1 FACTS
Hamilton Sundstrand has discovered that some RAT were manufactured with
non-conforming screws, Ref.  1 Hamilton Sundstrand CMM. The purpose of
these screws is to attach the balance washers, which can have a round or a
ectanqular shape depending on RAT confiquration. To date there have beer
instances of a fractured balance screw on various RAT part number
configurations. In one case, the balance washer was also tound missing.
Inspection of other screws  in Hamilton Sundstrand stock revealec
metallographic non-conformities consistent with those of the fractured
screws. The suspect screws have been isolated to one batch from a specific
supplier.
Analysis  shows the non-conformity can be a result of the supplier's
applied heat treatment process, which can increase susceptibility to

### Page 2 (OCR)

brittle fracture.
3.2 CONSEQUENCES
The applied heat treatment has resulted in a non-conforming screw
material. The affected screws are exposed to potential fracture, with
subsequent non-retention of the associated balance washer.
Detachment of the balance washer can create an unacceptable turbine
imbalance.
3.3 AIM
The aim of this AOT is to:
- Inform all A340-200/300 operators of the discovered nonconforming RAT
Screovide operators with a procedure to check the suspect part Numbers and  Serial Numbers of the In-Service/Spare RAT Turbine Lower Gearbox
Assemblies, and to replace the balance screws when affected.
per Ref.2  - Provide operators with recommendations prior to any RAT ground test as
4. SHORT TERM ACTION
4.1 AIRBUS RECOMMENDATION
following :  Airbus recommend that the actions described in paragraph 4.3. of this AOT  carried out at the next convenient opportunity in accordance with the
4.1.1  Identification of suspect RAT
From the list of RAT Turbine-Lower Gearbox Assemblies provided in
Hamilton-Sundstrand SB Ref.3, operators must identify the RAT that are in  the suspect batch.
CAUTION:
If the PN/SN of a RAT Turbine-Lower Gearbox Assembly  cannot be identified,
the RAT must be considered as suspect and inspected in accordance with the
instructions provided in this AOT paragraph 4.3.1.
4.1.2  Inspection/replacement
For RAT Turbine-Lower Gearbox Assemblies in the suspect batch, operators
following timescale:  requested to do the actions described in paragraph 4.3 within the
- the next 3000 flight hours after receipt of this All Operators Telex,
- the next 8 months after receipt of this All Operators Telex,  or
- before carrying out a RAT ground test as per Ref.2.
whichever occurs  first.
Any RAT Turbine Lower Gearbox Assembly identified with a missing
and/or a missing balance washer during the inspection has to be reworked
immediately as per paragraph 4.3.
4.2 PLANNING AND MANPOWER
When screws  are found in place on the turbine, Airbus estimate that a
maximum of 2 man-hours are required to gain access, replace the screws and

### Page 3 (OCR)

Lower Gearbox Assembly.  identify Hamilton Sundstrand SB Ref.3 accomplishment on the RAT Turbine-
with a screw that cannot be co from the aircraft is required.  For a RAT Turbine-Lower Gearbox Assembly with a missing balance washer, or  removal of the RAT
Turbine-Lower Gearbox Assembly from the
case, a maximum of 6 man-hours are required for replacement of the RAT
Turbine-Lower Gearbox Assembly and test on wing.
4.3 DESCRIPTION OF TASK
4.3.1. INSPECTION AND REPLACEMENT OF BALANCE SCREWS ON AIRCRAFT
1.  Extend the Ram Air Turbine (RAT) as per Ref. 4 AMM Task.
2.  Open, safety and tag these circuit breakers:
PANEL  DESIGNATION  FIN  LOCATION
721VU  HSMU B + PART G
722VU  HSMU Y + PART G
742VU  RAT STOW CTL
742VU  HYD RAT EXT SOL 2
742VU  RAT MAN ON
If the RAT Turbine-Lower Gearbox Assembly is not listed in the
effectivity of the Ref. 3 Hamilton Sundstrand Service Bulletin:
a) No further action on the RAT is required. Go to paragraph
4.3.1. (6).
Effectivity of Ref. 3 Hamilton Sundstrand Service Bulletin, and  If the RAT Turbine-Lower Gearbox Assembly is listed in the
"29-6":  the RAT Turbine-Lower Gearbox Assembly nameplate bears the symbol
a) The Ref. 3 Hamilton Sundstrand Service Bulletin has already
been applied. No further action on the RAT is required. Go to
paragraph 4.3.1. (6).
the effectivity of Ref. 3 Hamilton Sundstrand Service Bulletin,  If the installed RAT Turbine-Lower Gearbox Assembly is listed in
and the RAT Turbine-Lower Gearbox Assembly nameplate does not  bear the symbol "29-6":
a) If all the balance screws are fitted on the turbine. within
the timescale given in paragraph 4.1.2.:
• With the RAT installed on aircratt, replace all the balance  screws on the RAT Turbine-Lower Gearbox Assembly in accordance
with the Ret. 3 Hamilton Sundstrand Service Bulletin.
- Replace the RAT Turbine-Lower Gearbox Assembly (Refer to
Turbine-Lower  of Ref. 3 Hamilton Sundstrand  Ref.  5 and Ref. 6 AMM Tasks) and send the affected RAT  Gearbox Assembly to the vendor for application  Service Bulletin.
b) If one or several screws are broken and the associated balance
washers are still fitted on the turbine. Before the next flight:
- With the RAT installed on aircraft, replace all the balance
Screws on the RAT Turbine-Lower Gearbox Assembly in accordance
with the Ref. 3 Hamilton Sundstrand Service Bulletin.
- Replace the RAT Turbine-Lower  Gearbox Assembly (Refer to
5 and Ref. 6 AMM Tasks)  and send the affected RAT
Turbine-Lower Gearbox Assembly to the vendor for application
of Ref. 3 Hamilton Sundstrand Service Bulletin.

### Page 4 (OCR)

c) If one or  several screws and balance washers are broken, then
before next flight:
- Replace the RAT Turbine-Lower Gearbox Assembly (Refer to
5 and Ref. 6 AMM Tasks) and send the affected RAT
Turbine-Lower Gearbox Assembly to the vendor to balance the
Service Bulletin.  turbine assembly and apply the Ref. 3 Hamilton Sundstrand
breakers:  Remove the safety clip(s) and tag(s) and close these circuit
PANEL  DESIGNATION  FIN  LOCATION
721vU  HSMU B + PART G  6JG  10 U
722VU  HSMU Y + PART G  7JG  46 x
742VU  RAT STOW CTL  IJR  77 D
742VU  HYD RAT EXT SOL 2  SJR  76 D
742VU  RAT MAN ON  2JR  74 K
7.  Retract the Ram Air Turbine (RAT) as per Ref. 7 AMM Task.
Report all inspection results to Airbus in accordance with
paragraph 7 of this AOT.
4.3.2. INSPECTION AND REPLACEMENT OF SCREWS ON SPARE RAT
1.  If the RAT Turbine-Lower Gearbox Assembly is not listed in the
effectivity of the Ref.  3 Hamilton Service Bulletin:
- No further action on the RAT is required. Go to paragraph
4.3.2. (4) .
Effectivity of Ref. 3 Hamilton Sundstrand service Bulletin, and  the RAT Turbine-Lower Gearbox Assembly nameplate bears the symbol  It the RAT Turbine-Lower Gearbox Assembly is listed in the
- The Ref. 3 Hamilton Sundstrand Service Bulletin has already
been applied. No further action on the RAT is required. Go to
paragraph 4.3.2. (4).
3.  If the RAT Turbine-Lower Gearbox Assembly is listed in the
effectivity of Ref. 3 Hamilton Service Bulletin,  and the RAT
"29-6":  Turbine-Lower Gearbox Assembly nameplate does not bear the symbol
- Replace the balance screws on the RAT Turbine-Lower Gearbox
Assembly in accordance with the Ref. 3 Hamilton Service Bulletin.
- Send the aftected RAT Turbine-Lower  vendor for application of Ref. 3 Hamilton Service Bulletin.  Gearbox Assembly to the
Report all inspection results to Airbus in accordance with
paragraph 7 of this AOT.
4.4 MATERIAL / TOOLING
The material necessary for this inspection is listed in the Ref. 3
Hamilton Sundstrand Service Bulletin.
Hamilton Sundstrand will provide balance screws free of charge to the
affected operators.
The number of screws required for this inspection may vary from operator
to operator. Theretore, in order to determine the number of screws to be
ordered, operators are requested to contact their assigned Hamilton
Sundstrand Commercial  Spares Administrator (or fax to +1-815-226-2624, if

### Page 5 (OCR)

the responsible Administrator is not known). In addition, operators can  also use the Hamilton  Sundstrand website at www.hamiltonsundstrand.com to
"Customer Service"  "Customer service followedes commercial spares for vehsite, talect  followed by  for other contact and
order processing options that are available.
5. FURTHER ACTION
No further action is requested after full accomplishment of this AOT.
6. AOT APPROVAL
The technical content  of this AOT has been approved under the authority of
EASA design organisation approval number EASA.21.J.031.
It is anticipated that this AOT will be rendered mandatory by an EASA
Airworthiness Directive (AD).
7. REPORTING / ACKNOWLEDGMENT
Operators are requested to acknowledge receipt of this AOT within 48 hours
after receipt to:
Mhone: +33 (0P5 61 93 47 91  Phone: +33 (0)5
Fax: +33 (0)5 61 93 32 73
Mailto: richard.lascours@airbus.com
This acknowledgement can be made through the Airbus RCSM when available.
Inspection results and questions about the technical content of this AOT
are to be addressed to:
Mr. Adrien TONON
Hydrau +3515 67 19 20 35  SEEL4
Phone: +33
Fax: +33 (0) 5 61 93 32 73
Mailto: adrien.tonon@airbus.com
Best regards,
J. GROTHER
VICE PRESIDENT A330/A340 PROGRAMME
CUSTOMER SERVICES DIRECTORATE
"there that its be monited or intercepter your attention  Further, whilst airbus has taken reasonable measures to ensure the
Integrity of this message and its contents, no warranty, whether express
or implied is given that the contents hereof conform to the original. Ir
case of any doubt, please retrieve this document from your sita address or
the Airbus AOLS system or request that it be retransmitted by fax or
telex."
Page 5

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
