# Airbus All Operators Transmission A340-52A4091

Copy: No revision named ("U.S. DOT/FAA - Service Information - 2"), 3 pages: PDF https://openairdocs.org/files/sha256/da/16/da16672ec1b41c9aa77625341dd05260829ab0113c95b5118aa475863b525277; text https://openairdocs.org/service-documents/airbus/aot-a340-52a4091/file/da16672ec1b4.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2012-0152; AD 2012-12-12 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Other document (All Operators Transmission)
- Number: A340-52A4091
- Page: https://openairdocs.org/service-documents/airbus/aot-a340-52a4091

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2012-12-12](https://openairdocs.org/ad/2012-12-12.md), effective Jul 30, 2012: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/aot-a340-52a4091/proposed.md).

## Text (3 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2012-0152; AD 2012-12-12 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

ALL OPERATORS TELEX - ALL OPERATORS TELEX
SUBJECT: A340 - ATA52 - INSPECTION OF AFT CARGO COMPARTMENT DOOR
OUR REF: AOT A340-52A4091 DATED 20 DECEMBER 2010
1. AIRCRAFT AFFECTED
All A340-200/300 up to MSN 163 included that do not have SB 52-4054
incorporated.
2. REFERENCED DOCUMENTATION
REF.1: SB 52-4053 rev 01
REF.2: SB 52-4054 rev 01
3. REASON
3.1 FACTS
The affected aircraft have been subject to a mandatory inspection
program of the aft cargo door called by SB ref.1 at a threshold of 12000
Flight Cycles (FC) and a repeat interval of 4000 FC. Accomplishment of
Mod SB ref.2 reinforces the cargo door structure and cancels the
inspection requirement.
During a routine 2A check, an operator found the aft cargo door frame
64A cracked on a length of more than 3 inches. Outer skin rivets were
also found sheared.  At time of finding the aircraft had accumulated
10564 FC, i.e. below the 12000 FC threshold of inspection SB ref.1. The
affected aircraft did not have SB ref.2 incorporated.
3.2 CONSEQUENCES
In case of one cracked or ruptured cargo door frame, the loads will be
transferred to the remaining structural elements. This second load path
is able to sustain the loads for a limited number of flight cycles.
With the current inspection threshold and interval as per SB ref. 1, the
detection of a crack cannot be guaranteed, which might lead to cracking
or rupture of a second cargo door frame.
A Safety Assessment has shown that rupture of two frames represents an
unsafe condition due to loss of the structural integrity of the aft
cargo door.
3.3 AIM
The aim of this AOT is to provide instructions for an inspection of the
aft cargo door outer skin for sheared, loose or missing rivets at all
frame fork ends.
4. ACTION REQUIRED
4.1 PLANNING
Before the accumulation of 4000 FC since the first flight or within 400
FC after the AOT reception, whichever occurs later, the inspection
described in paragraph 4.3 has to be performed and has to be repeated
every 400 FC.
4.2 MANPOWER
0.2 man-hours per aircraft are estimated for the inspection.

### Page 2

4.3 DESCRIPTION
Before inspecting, close and lock the aft cargo door.
Perform a detailed visual inspection of outer skin rivets at the frame
fork ends between FR60 and Fr64A. Refer to the area A of the appendix 01
for details of the inspection. Inspect each area for sheared, loose or
missing rivets.
If no sheared, loose or missing rivet is found, repeat the inspection
within the next 400 FC.
If rivets are found sheared, loose or missing, no further flight is
permitted. Contact Airbus for corrective action.
4.4 MATERIAL
AIRBUS MATERIAL, LOGISTICS AND SUPPLIERS
WEG BEIM JAEGER 150
D-22335 HAMBURG
GERMANY
FAX: + 49 40 5076 4012
INTERNET: HTTP://SPARES.AIRBUS.COM
5. TERMINATING ACTION
The existing SB Ref.1 will be revised to take into account the new
threshold and new inspection interval of this AOT. SB revision 02 and
subsequent will supersede and cancel this AOT.
Accomplishment of Mod SB ref.2 will also cancel the repetitive
inspection requirement of this AOT.
6. AOT APPROVAL
The technical content of this AOT has been approved under EASA design
organisation EASA.21J.031.
It is anticipated that this AOT will be rendered mandatory by an EASA
AD.
7. REPORTING/ACKNOWLEDGEMENT
Operators are requested to acknowledge receipt of this AOT within 48
hours after receipt to:
MS. CECILE BORDES SEES
E-MAIL Cecile.bordes@airbus.com
FAX NUMBER +33+ (0)5 61.93.47.35
This acknowledgement can be made through the AIRBUS field service where
available.
Question about this AOT and inspection results with or without findings
are to be sent to AIRBUS CUSTOMER SERVICES ENGINEERING as soon as
possible, after the AOT application, to the attention of:
MR. PIERRE BARBEAU SEES3
PHONE NUMBER +33+ (0)5 67.19.73.35
FAX NUMBER +33+ (0)5 61.93.36.14
E-MAIL PIERRE.BARBEAU@AIRBUS.COM
Best Regards
PHILIPPE GOURDON
VICE PRESIDENT A330/A340 PROGRAMME

### Page 3

CUSTOMER SERVICES DIRECTORATE
If you receive this message via e-mail/internet, we draw your attention
to the fact that it may be monitored and/or intercepted. Further, whilst
airbus has taken reasonable measures to ensure the integrity of this
message and its contents, no warranty, whether express or implied, is
given that the contents hereof conform to the original. In case of any
doubt, please retrieve this document from your SITA address or Airbus
World or request that it be retransmitted by fax or telex.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
