# Airbus All Operators Transmission A36P010-23

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 01 ("Airbus AOT A36P010-23"), 13 pages: PDF https://openairdocs.org/files/sha256/17/93/1793a3621fe6cba5de99f62f7247b92965518e62c3949fa8334942c16d4b9aa5; text https://openairdocs.org/service-documents/airbus/aot-a36p010-23/file/1793a3621fe6.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2024-1701, the docket of AD 2025-05-14. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 01 ("AOT-A36P010-23-02"), 20 pages: PDF https://openairdocs.org/files/sha256/71/09/7109942ceb2dfa26d2ab3809f948c42703a5fb4b83dcad31173d0b101ed4a5c6; text https://openairdocs.org/service-documents/airbus/aot-a36p010-23/file/7109942ceb2d.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2024-1701, the docket of AD 2025-05-14. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Other document (All Operators Transmission)
- Number: A36P010-23
- Latest revision known: A36P010-23, Revision 01, dated April 17, 2024 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus/aot-a36p010-23

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2025-05-14](https://openairdocs.org/ad/2025-05-14.md), effective Apr 22, 2025: Revision 01

## Text (13 pages)

Revision 01, the newest copy. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2024-1701, the docket of AD 2025-05-14. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

CUSTOMER SERVICES DIRECTORATE
2 ROND POINT EMILE DEWOITINE
31700 BLAGNAC FRANCE
TELEPHONE + 33 (0)5 61 93 33 33
ALERT OPERATORS TRANSMISSION - AOT
AOT ref: A36P010-23 Rev 00 Page 1 of 13 Date: 13-FEB-2024
C80_AOT_FM1104649_v8.0 © AIRBUS S.A.S. 2024. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
SUBJECT: ATA 36 – A350 - PCE leaks and Thermal Blankets damaged
AIRCRAFT TYPE: A350
OUR REF.: A36P010-23 Rev 00 dated 13-FEB-2024
EFFECTIVITY DATE: 23-FEB-2024
0. REASON FOR REVISION
N/A
1. AIRCRAFT AFFECTED
This AOT is applicable to all A350 in-service aircraft.
2. REFERENCED DOCUMENTATION
2.1 APPENDIX
Appendix 1 - PCE leak test and Thermal blanket inspection Flow chart 
Appendix 2 - PCE Inspection report sheet. 
Appendix 3 - Nacelle Damage Description (NDD)
Appendix 4 - ADVC_TASK A350-A-36-11-XX-02001-360A-A Leak Test of the Bleed Air 
PreCooler Exchanger (PCE) on the Wing
Appendix 5 - ADVC_TASK A350-A-36-11-62-00001-720A-A Installation of the Bleed-Air 
Precooler Exchanger
2.2 REFERENCES
Ref. 1. - TFU 36.11.00129 
Ref. 2. - MP A350-A-78-3X-XX-00001-398A-A - Opening of the Thrust Reverser (T/R) Cowls with 
the Power Door Opening System (PDOS)
Ref. 3. - MP A350-A-78-3X-XX-04001-398A-A - Opening of the Thrust Reverser (T/R) Cowls 
Manually.
Ref. 4. - MP A350-A-78-32-XX-01001-310A-A - General Visual Inspection (GVI) of the Thrust 
Reverser (T/R) Structure
Ref. 5. - NDT A350-A-51-99-XX-01001-040A-A - Visual Special Detailed Inspection
Ref. 6. - MP A350-A-36-11-62-00001-520A-A - Removal of the Bleed-Air Precooler

### Page 2

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A36P010-23 Rev 00 Page 2 of 13 Date: 13-FEB-2024
C80_AOT_FM1104649_v8.0 © AIRBUS S.A.S. 2024. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
Ref. 7. - RIL V36M24000117
3. REASON
3.1 FACTS
Airbus informs operators that several cases of Precooler Exchanger (PCE) leakage have been reported. 
In some of these cases, surrounding Thermal Blankets (TB) were found damaged.
The affected thermal blankets are:
Thrust Reverser (T/R) Thermal Blanket P/N 351D9906-99
Pylon Thermal Blanket P/N V0003071504200
In nominal bleed operation, 2 bleeds ON and 2 Packs ON, no warning alerts nor cockpit effects linked 
to these leaks have been observed.
3.2 HISTORY/BACKGROUND
During an unrelated maintenance action, an operator reported some cases of T/R and Pylon Thermal 
Blankets damage. 
After troubleshooting, it was observed that PCE installed in the engine core was leaking for these cases 
where blankets were found damaged.
3.3 ROOT CAUSE
Investigation is ongoing to understand the root-cause of the premature failure of the PCE. Refer to 
Ref. 1 - TFU 36.11.00129 for status on the current investigation. 
3.4 INVESTIGATION
Investigation is ongoing. Refer to Ref. 1 - TFU 36.11.00129 for status on the current investigation. 
3.5 CONSEQUENCES
In case of PCE leak, there is a risk of T/R Thermal Blanket damage and / or Pylon Thermal Blanket 
damage.

### Page 3

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A36P010-23 Rev 00 Page 3 of 13 Date: 13-FEB-2024
C80_AOT_FM1104649_v8.0 © AIRBUS S.A.S. 2024. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
Figure 1: Example of T/R Thermal Blanket damaged
Figure 2: Example of Pylon Thermal Blanket damaged

### Page 4

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A36P010-23 Rev 00 Page 4 of 13 Date: 13-FEB-2024
C80_AOT_FM1104649_v8.0 © AIRBUS S.A.S. 2024. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
4. OBJECTIVES OF THIS AOT
This AOT recommends below instructions to detect PCE leak before thermal blanket damage or, in 
worst case, to reduce the exposure time in such conditions:  
Perform PCE leak test on A/C with installed PCE having accumulated ≥ 5,500 FC at the time of 
AOT effective date. (refer to paragraph 5.6.A)
In case of PCE leakage:
oPerform a Visual Inspection of the T/R Thermal Blanket after failure of the PCE leak test 
(refer to paragraph 5.6.B).
oPerform a Visual Inspection of the Pylon Thermal Blanket after failure of the PCE leak test 
(refer to paragraph 5.6.C).
oReplace the PCE after failure of the PCE leak test (refer to paragraph 5.6.D).
In case of no PCE leak found after performing PCE leak test, perform a repetitive PCE leak test 
every 100 FC after first inspection.
5. MAINTENANCE PROCEDURE
NOTE: This AOT is classified mandatory or expected to be classified mandatory by an Airworthiness 
Directive (AD). If the instructions of this AOT are marked as Required for Compliance (RC), the 
operator must follow the instructions as indicated. These instructions are introduced by “in 
accordance with”.
NOTE: The instructions of this AOT include procedures given in other documents or in other sections 
of the AOT. If the instructions of this AOT are NOT marked as Required for Compliance (RC), the 
operator can use an alternative procedure accepted by his/her local authority. These instructions 
are introduced by “refer to”.
NOTE: When this AOT gives the access or close-up instructions with no return to service tests, the 
operator can adapt these instructions to add flexibility to the maintenance operations. The technical 
intent of this AOT must comply with the set parameters.
5.1 PLANNING - (RC)
The compliance times for the PCE leak test and Thermal Blankets visual inspections are the following 
ones:
Threshold: PCE 5,500 FC Time Since New.
A Grace Period of 100 FC or 3 months, whichever occurs first, is given to plan and prepare the 
future PCE leak test. This is applicable to A/C in the following conditions at the time of AOT 
effective date:
oA/C with installed PCE that have already accumulated 5,500 FC or more.
oA/C with installed PCE that have not accumulated the threshold of 5,500FC but should 
reach this threshold before the grace period limits.
Interval: If PCE passes the leak test, to perform the leak test every 100 FC after the first 
inspection.

### Page 5

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A36P010-23 Rev 00 Page 5 of 13 Date: 13-FEB-2024
C80_AOT_FM1104649_v8.0 © AIRBUS S.A.S. 2024. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
For aircraft in Parking or Storage condition with PCE which have accumulated 5,500 FC or more and 
that would return to service at a date later than the Grace Period of 3 months, the recommended 
maintenance actions can be delayed until the next A/C engine run.
5.2 MANPOWER
Leak test of PCE:
Job Set-up, access and close up on ENG1(2) side refer to Appendix 4: 4 MH
Leak test of PCE on ENG1(2) side refer to Appendix 4: 1 MH
Visual inspection of T/R Thermal Blanket:
Job Set-up, access and close up on ENG1(2) side refer to 5.6.B: 0.5 MH
Visual inspection of T/R Thermal Blanket on ENG1(2) side refer to Paragraph 5.6.B: 2 MH
Visual inspection of Pylon Thermal Blanket:
Job Set-up, access and close up on ENG1(2) side refer to Paragraph 5.6.C: 1 MH
Visual inspection of Pylon Thermal Blanket on ENG1(2) side refer to Paragraph 5.6.C: 0.5 MH
Removal of the PCE:
Job Set-up, access and close up on ENG1(2) side refer to Ref. 6: 1.5 MH
Removal of PCE on ENG1(2) side refer to Ref. 6: 6 MH
Installation of the PCE:
Job Set-up, access and close up on ENG1(2) side refer to Appendix 5: 1.5 MH
Installation of PCE on ENG1(2) side refer to Appendix 5: 6 MH
5.3 ACCESS
For the Leak test of PCE:
ADVC_TASK A350-A-36-11-XX-02001-360A-A Leak Test of the Bleed Air Precooler Exchanger 
(PCE) on the Wing (Appendix - 4)
oAccess and working zone:
Access panel 193KB
Access panel 453DL for ENG 1
Access panel 463DL for ENG 2
Work zone 410 for ENG1
Work zone 420 for ENG2
Work zone 450 for ENG1 Pylon
Work zone 460 for ENG2 Pylon

### Page 6

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A36P010-23 Rev 00 Page 6 of 13 Date: 13-FEB-2024
C80_AOT_FM1104649_v8.0 © AIRBUS S.A.S. 2024. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
oWarnings and cautions:
WARNING: BEFORE YOU DO WORK ON OR AROUND THE THRUST 
REVERSER, MAKE SURE THAT THE THRUST REVERSER IS INHIBITED. IF 
YOU DO NOT OBEY THIS INSTRUCTION, YOU CAN CAUSE ACCIDENTAL 
OPERATION OF THE THRUST REVERSER AND INJURY TO PERSONS 
AND/OR DAMAGE TO THE EQUIPMENT.
WARNING: MAKE SURE THAT THE PNEUMATIC SYSTEM IS 
DEPRESSURIZED BEFORE YOU START WORK. PRESSURIZED AIR CAN 
CAUSE INJURY TO PERSONNEL.
WARNING: WHEN YOU DO THIS WORK, ALWAYS PUT ON PROTECTIVE 
GLOVES, GOGGLES AND PROTECTIVE CLOTHING TO PREVENT INJURY.
WARNING: BEFORE YOU START WORK, YOU MUST PUT ON A SAFETY 
HARNESS AND ATTACH IT TO THE ACCESS PLATFORM. WITHOUT A 
SAFETY HARNESS, YOU CAN FALL. THIS CAN KILL YOU OR CAUSE YOU 
INJURY.
WARNING: DO NOT TOUCH HOT PARTS WITHOUT APPLICABLE GLOVES. 
HOT PARTS CAN CAUSE AN INJURY. IF YOU GET AN INJURY, PUT IT IN 
COLD WATER FOR 10 MINUTES AND GET MEDICAL AID.
WARNING: BE CAREFUL WHEN YOU DO WORK ON THE ENGINE PARTS 
AFTER THE ENGINE IS SHUTDOWN. THE ENGINE AND ENGINE OIL CAN 
STAY HOT FOR A LONG TIME. IF YOU DO NOT OBEY THIS INSTRUCTION, 
INJURY CAN OCCUR.
WARNING: MAKE SURE THAT THE SAFETY DEVICES AND THE WARNING 
NOTICES ARE IN POSITION BEFORE YOU START A TASK ON OR NEAR:
THE FLIGHT CONTROLS
THE FLIGHT CONTROL SURFACES
THE LANDING GEAR AND RELATED DOORS
THE CARGO DOORS
THE ENGINES
OTHER COMPONENTS THAT MOVE.
MOVEMENT OF COMPONENTS CAN KILL OR CAUSE INJURY TO 
PERSONS AND/OR DAMAGE TO EQUIPMENT.
WARNING: BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. 
OBEY THE MATERIAL MANUFACTURER INSTRUCTIONS AND YOUR 
LOCAL REGULATIONS.
oSpecific ground support:
Access platform 1M(3FT)
Access platform 3M (10FT) - Adjustable 
For the Visual inspection of T/R Thermal Blanket:
MP A350-A-78-32-XX-01001-310A-A - General Visual Inspection (GVI) of the Thrust Reverser 
(T/R) Structure. (Ref. 4.)
oAccess and working zones:
Work zone 410 for ENG1
Work zone 420 for ENG2

### Page 7

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A36P010-23 Rev 00 Page 7 of 13 Date: 13-FEB-2024
C80_AOT_FM1104649_v8.0 © AIRBUS S.A.S. 2024. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
oWarnings and cautions:
WARNING: BE CAREFUL WHEN YOU DO WORK ON THE ENGINE PARTS 
AFTER THE ENGINE IS SHUTDOWN. THE ENGINE PARTS CAN STAY HOT 
FOR ALMOST 1 HOUR.
WARNING: DO NOT TOUCH HOT PARTS WITHOUT APPLICABLE GLOVES. 
HOT PARTS CAN CAUSE AN INJURY.
WARNING: BEFORE YOU DO WORK ON OR AROUND THE THRUST 
REVERSER, MAKE SURE THAT THE THRUST REVERSER IS INHIBITED. IF 
YOU DO NOT OBEY THIS INSTRUCTION, YOU CAN CAUSE ACCIDENTAL 
OPERATION OF THE THRUST REVERSER AND INJURY TO PERSONS 
AND/OR DAMAGE TO THE EQUIPMENT.
WARNING: WEAR APPLICABLE PERSONAL PROTECTIVE EQUIPMENT (PPE) 
WHEN YOU DO THIS TASK. BEFORE YOU USE PPE, READ, UNDERSTAND 
AND OBEY ALL INSTRUCTIONS FOR ITS USE. THESE INSTRUCTIONS 
INCLUDE INSTRUCTIONS FROM THE MANUFACTURER, YOUR EMPLOYER 
AND GOVERNMENT REGULATIONS. YOU CAN GET INJURED IF YOU DO NOT 
USE PPE. GET INSTRUCTIONS FROM YOUR EMPLOYER ON WHICH PPE IS 
NECESSARY.
oSpecific ground support:
Access platform 3M (10FT) - Adjustable 
For the Visual inspection of Pylon Thermal Blanket:
Refer to AOT paragraph 5.6.C.
oAccess and working zones:
Work zone 410 for ENG1
Work zone 420 for ENG2
oWarnings and cautions:
WARNING: BE CAREFUL WHEN YOU DO WORK ON THE ENGINE PARTS 
AFTER THE ENGINE IS SHUTDOWN. THE ENGINE PARTS CAN STAY HOT 
FOR ALMOST 1 HOUR.
WARNING: DO NOT TOUCH HOT PARTS WITHOUT APPLICABLE GLOVES. 
HOT PARTS CAN CAUSE AN INJURY.g
WARNING: BEFORE YOU DO WORK ON OR AROUND THE THRUST 
REVERSER, MAKE SURE THAT THE THRUST REVERSER IS INHIBITED. IF 
YOU DO NOT OBEY THIS INSTRUCTION, YOU CAN CAUSE ACCIDENTAL 
OPERATION OF THE THRUST REVERSER AND INJURY TO PERSONS 
AND/OR DAMAGE TO THE EQUIPMENT.
WARNING: WEAR APPLICABLE PERSONAL PROTECTIVE EQUIPMENT (PPE) 
WHEN YOU DO THIS TASK. BEFORE YOU USE PPE, READ, UNDERSTAND 
AND OBEY ALL INSTRUCTIONS FOR ITS USE. THESE INSTRUCTIONS 
INCLUDE INSTRUCTIONS FROM THE MANUFACTURER, YOUR EMPLOYER 
AND GOVERNMENT REGULATIONS. YOU CAN GET INJURED IF YOU DO NOT 
USE PPE. GET INSTRUCTIONS FROM YOUR EMPLOYER ON WHICH PPE IS 
NECESSARY.
oSpecific ground support:
Access platform 3M (10FT) - Adjustable 
For the Removal / Installation of PCE:

### Page 8

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A36P010-23 Rev 00 Page 8 of 13 Date: 13-FEB-2024
C80_AOT_FM1104649_v8.0 © AIRBUS S.A.S. 2024. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
TASK A350-A-36-11-62-00001-520A-A Removal of the Bleed-Air Precooler Exchanger (Ref -6), 
and ADVC_TASK A350-A-36-11-62-00001-720A-A Installation of the Bleed-Air Precooler 
Exchanger (Appendix – 5)
oAccess and working zones:
Access panel 193KB
Access panel 453DL for ENG 1
Access panel 463DL for ENG 2
Work zone 410 for ENG1
Work zone 420 for ENG2
Work zone 450 for ENG1 PYLON
Work zone 460 for ENG2 PYLON
oWarnings and cautions:
WARNING: BE CAREFUL WHEN YOU REMOVE OR INSTALL THIS 
EQUIPMENT. THIS EQUIPMENT IS HEAVY (MORE THAN 12 KG (26.5 lb)) AND 
CAN CAUSE INJURY AND/OR DAMAGE.
WARNING: BEFORE YOU DO WORK ON OR AROUND THE THRUST 
REVERSER, MAKE SURE THAT THE THRUST REVERSER IS INHIBITED. IF 
YOU DO NOT OBEY THIS INSTRUCTION, YOU CAN CAUSE ACCIDENTAL 
OPERATION OF THE THRUST REVERSER AND INJURY TO PERSONS 
AND/OR DAMAGE TO THE EQUIPMENT.
WARNING: MAKE SURE THAT THE PNEUMATIC SYSTEM IS 
DEPRESSURIZED BEFORE YOU START WORK. PRESSURIZED AIR CAN 
CAUSE INJURY TO PERSONNEL.
WARNING: BE CAREFUL WHEN YOU DO WORK ON THE ENGINE PARTS 
AFTER THE ENGINE IS SHUTDOWN. THE ENGINE AND ENGINE OIL CAN 
STAY HOT FOR A LONG TIME. IF YOU DO NOT OBEY THIS INSTRUCTION, 
INJURY CAN OCCUR.
WARNING: BEFORE YOU START WORK, YOU MUST PUT ON A SAFETY 
HARNESS AND ATTACH IT TO THE ACCESS PLATFORM. WITHOUT A 
SAFETY HARNESS, YOU CAN FALL. THIS CAN KILL YOU OR CAUSE YOU 
INJURY.
WARNING: MAKE SURE THAT THE SAFETY DEVICES AND THE WARNING 
NOTICES ARE IN POSITION BEFORE YOU START A TASK ON OR NEAR:
THE FLIGHT CONTROLS
THE FLIGHT CONTROL SURFACES
THE LANDING GEAR AND RELATED DOORS
THE CARGO DOORS
THE ENGINES
OTHER COMPONENTS THAT MOVE.
MOVEMENT OF COMPONENTS CAN KILL OR CAUSE INJURY TO 
PERSONS AND/OR DAMAGE TO EQUIPMENT.
WARNING: DO NOT TOUCH HOT PARTS WITHOUT APPLICABLE GLOVES. 
HOT PARTS CAN CAUSE AN INJURY.
oSpecific ground support:
Access platform 3M (10FT) - Adjustable 
Access platform 5M (16FT) - Adjustable

### Page 9

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A36P010-23 Rev 00 Page 9 of 13 Date: 13-FEB-2024
C80_AOT_FM1104649_v8.0 © AIRBUS S.A.S. 2024. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
5.4 INSPECTION - (RC)
The following Visual inspections are requested to be performed in case of PCE leak:
T/R thermal blanket visual inspection procedure in accordance with AOT Instructions Paragraph 
5.6.B. 
Pylon Thermal blanket visual inspection procedure in accordance with AOT Instructions 
Paragraph 5.6.C.
5.5 FINDINGS 
PCE leaks found during PCE Leak test procedure in accordance with AOT instructions Paragraph 
5.6.A are considered as a finding. 
In case of PCE leak all the following actions are requested to be performed: 
oFor T/R thermal blanket visual inspection procedure, in accordance with AOT 
Instructions Paragraph 5.6.B, the potential findings on T/R Thermal Blanket are:
Burn marks.
Damage without perforation of the Thermal Blanket.
Thermal Blanket perforated or partially missing.
Inner Fixed Structure (IFS) direct exposure
oFor Pylon Thermal blanket visual inspection procedure in accordance with AOT 
Instructions Paragraph 5.6.C. The potential findings on Pylon Thermal Blanket are:
Cracks.
Gouges.
Nicks.
Scores. 
Scratches. 
Missing pieces.
5.6 INSTRUCTIONS - (RC)
A350 operators must identify if a PCE that has accumulated 5,500FC (since new) is installed on an A/C 
in their fleet. 
A PCE identified with 5,500 FC or more has to be tested.  
The flowchart in Appendix 1 details the appropriate subsequent actions which must be taken. 
A. PCE LEAK TEST PROCEDURE
a. Take close pictures of the PCE cold path.

### Page 10

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A36P010-23 Rev 00 Page 10 of 13 Date: 13-FEB-2024
C80_AOT_FM1104649_v8.0 © AIRBUS S.A.S. 2024. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
b. Perform PCE Leak Test of the Bleed Air Precooler Exchanger (PCE) on the Wing in accordance 
with ADVC_ TASK A350-A-36-11-XX-02001-360A-A (Appendix 4). 
i. If the PCE leak test is failed, apply the following actions:
Perform Visual inspection of the T/R Thermal blankets in accordance with 
Paragraph 5.6.B
Perform Visual inspection of Pylon Thermal blanket in accordance with Paragraph 
5.6.C
Replace PCE in accordance with Paragraph 5.6.D
Contact Airbus through TechRequest in order to provide the following information:
oPCE Inspection sheet report fulfilled. Refer to Appendix 2.
oPictures of the PCE’s cold path.
oSAR017 data of 3 previous flights (before PCE leak test)
oSAR017 of flight after the PCE replacement when available.  
ii. If the PCE leak test is passed, apply the following actions:
Contact Airbus through Tech Request in order to provide the following information:
oPCE Inspection sheet report fulfilled. Refer to Appendix 2.
oPictures of the PCE’s cold path.
Perform PCE leak test Procedure in accordance with Paragraph 5.6.A in the next 
100 FC.
B. VISUAL INSPECTION OF THE T/R THERMAL BLANKETS AFTER FAILURE OF PCE LEAK 
TEST
Perform this procedure when the PCE leak test is failed:  
i. If T/R cowls are not already open; Open the thrust reverser cowls to access the lower 
spar area of the pylon box. Refer to Ref.2 - MP A350-A-78-3X-XX-00001-398A-A - 
Opening of the Thrust Reverser (T/R) Cowls with the Power Door Opening System 
(PDOS) or Ref. 3. - MP A350-A-78-3X-XX-04001-398A-A - Opening of the Thrust 
Reverser (T/R) Cowls Manually.
NOTE: All parts removed for access will be stored in a safe area to ensure a correct re-
installation without damage.
ii. Perform Visual inspection of the T/R Thermal blankets in accordance with Ref. 4 - MP 
A350-A-78-32-XX-01001-310A-A - General Visual Inspection (GVI) of the Thrust 
Reverser (T/R) Structure.
iii. In case of T/R thermal blanket findings, please provide to Airbus and Collins a complete 
report of damage with Collins NDD report (type of damage, dimensions, position, 
pictures).
iv. Wait for Airbus statement before further actions.
v. If no damage is found, no more actions are required on the nacelle side.

### Page 11

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A36P010-23 Rev 00 Page 11 of 13 Date: 13-FEB-2024
C80_AOT_FM1104649_v8.0 © AIRBUS S.A.S. 2024. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
C. VISUAL INSPECTION OF THE PYLON THERMAL BLANKETS AFTER FAILURE OF PCE 
LEAK TEST
Perform this procedure when the PCE leak test is failed. 
The following instruction describes the job for the inspection of Pylon thermal blanket P/N 
V00030715042. 
***START OF THE PROCEDURE***
i. If T/R cowls are not already open; Open the thrust reverser cowls to access the lower 
spar area of the pylon box. Refer to Ref.2 - MP A350-A-78-3X-XX-00001-398A-A - 
Opening of the Thrust Reverser (T/R) Cowls with the Power Door Opening System 
(PDOS) or Ref. 3. - MP A350-A-78-3X-XX-04001-398A-A - Opening of the Thrust 
Reverser (T/R) Cowls Manually.
NOTE: All parts removed for access will be stored in a safe area to ensure a correct re-
installation without damage.
ii. Do a detailed visual inspection of the thermal blanket P/N V00030715042 in 
accordance with Ref. 5 - NDT A350-A-51-99-XX-01001-040A-A - Visual Special 
Detailed Inspection.
iii. If any damage is detected (cracks, gouges, nicks, scores, scratches, missing pieces) 
to provide Airbus through Tech Request a complete report of damage (type of damage, 
dimensions, position, and provide clear pictures) and if possible, the root cause of the 
damage. 
iv. Wait for Airbus statement before further actions
v. If no damage is found, no more actions are required on the pylon side.
***END OF THE PROCEDURE***
D. PCE REPLACEMENT AFTER FAILURE OF PCE LEAK TEST
Perform this procedure when the PCE leak test is failed. 
i. Perform removal of the PCE in accordance with Ref. 6 - MP A350-A-36-11-62-00001-
520A-A - Removal of the Bleed-Air Precooler
ii. Perform installation of the PCE. in accordance with ADVC_TASK A350-A-36-11-62-
00001-720A-A (Appendix 5)
5.7 SPARES AND TOOLING
The leak test of the PCE requires one of the following material and tooling depending on the selected 
method for the leak test:
Aluminum foil
Leak detector Camera P/N 99V36009001000
Textile Lint free Cotton

### Page 12

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A36P010-23 Rev 00 Page 12 of 13 Date: 13-FEB-2024
C80_AOT_FM1104649_v8.0 © AIRBUS S.A.S. 2024. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
The replacement of the PCE requires specific tooling and material. Find below information about the 
spares, tool and materials that are necessary:
Ground Support Equipment (GSE) tooling P/N 98V36003000000 or P/N 98V36003000001
PCE P/N 67200000-02
Seal P/N AS1895-7-600
In case of T/R Thermal blanket damage that will lead to it replacement, the following spare are 
required:
oT/R Thermal Blanket P/N 351D9906-99
oT/R Thermal Blanket P/N 351D9906-16
In case of Pylon Thermal blanket damage that will lead to it replacement, the following spare are 
required:
Pylon Heat shield P/N V0003071504200 (A350-900 from MSN005 onwards)
Pylon Heat shield P/N V0003081501200 (A350-1000 from MSN059 onwards)
5.7.1 REMOVED UNITS
PCE removed units have to be sent to Honeywell LHT to the following address:
Lufthansa Technik
Weg Beim Jager 193
Hamburg,Hamburg 22335
Germany
Pylon Thermal Blankets removed units have to be sent to Airbus to the following address:
Airbus St Eloi, quai E101Q
A l'attention de Aurélie EMILE (E50)
Tel: +33 776144773
2 chemin Henry Bessemer
31200 TOULOUSE
Thrust Reverser Thermal Blankets removed can be scrapped. 
5.7.2. COMMERCIAL POLICY
For Commercial Policy refer to Ref. 7 - RIL V36M24000117
6. ADDITIONAL INFORMATION
6.1 FOLLOW-UP PLAN
An Airworthiness Directive (AD) is expected to be published by EASA on this topic, mandating this AOT. 
This AOT will be cancelled as soon as a technical solution will be available to address the Precooler 
leak.

### Page 13

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A36P010-23 Rev 00 Page 13 of 13 Date: 13-FEB-2024
C80_AOT_FM1104649_v8.0 © AIRBUS S.A.S. 2024. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
6.2 IMPACTED DOCUMENTATION
TFU 36.11.00129
6.3 AOT APPROVAL
The technical content of this document is approved under the authority of the DOA ref.EASA.21J.031.
7. REPORTING
Address your inspection results (with or without findings) to Airbus Customer Services through the generic 
e-mail address inspection.results@airbus.com and to monitored.retrofit@airbus.com. Refer to the latest 
reporting policy (Ref in the OIT 999.0018/16). 
Give the AOT reference in the mail title, as follows: AOT A36P010-23 Inspection Result
You can address your questions about this AOT to Airbus Customer Services through TechRequest 
on Airbus World, selecting Engineering Domain, Engineering Support Section and ATA 36/11/Topic 
PCE Leak and Thermal Blankets damaged.
Best Regards,
Ahmed CHABBOUH
SENIOR DIRECTOR IN-SERVICE
ENGINEERING
CUSTOMER CARE CENTER
Mathieu DUMAS
HEAD OF WIDE BODY PROGRAMME
SUPPORT
CUSTOMER SERVICES

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
