# Airbus All Operators Transmission A52W016-24

Copy: Revision 01 ("AOT A52W016-24 Rev 01"), 9 pages: PDF https://openairdocs.org/files/sha256/eb/63/eb63b9e1e19685c628398184129ea178c30ec360706745ed34c34ce13a48c88b; text https://openairdocs.org/service-documents/airbus/aot-a52w016-24/file/eb63b9e1e196.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2024-2556, the docket of AD 2025-19-06. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Other document (All Operators Transmission)
- Number: A52W016-24
- Latest revision known: A52W016-24, Revision 01, dated July 1, 2024 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus/aot-a52w016-24

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/aot-a52w016-24/proposed.md).

## Text (9 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2024-2556, the docket of AD 2025-19-06. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

CUSTOMER SERVICES DIRECTORATE
2 ROND POINT EMILE DEWOITINE
31700 BLAGNAC FRANCE
TELEPHONE + 33 (0)5 61 93 33 33
ALERT OPERATORS TRANSMISSION - AOT
AOT ref: A52W016-24 Rev 01 Page 1 of 9 Date: 01-JUL-2024
C80_AOT_FM1104649_v8.0 © AIRBUS S.A.S. 2024. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
SUBJECT: ATA 52 – Inspection of the Main Deck Cargo Door (MDCD) Actuator Bearing Fittings
AIRCRAFT TYPE: A300, A300-600, A310
OUR REF.: A52W016-24 Rev 01 dated 01-JUL-2024
OUR PREVIOUS REF.: A52W016-24 Rev 00 dated 18-MAR-2024
EFFECTIVITY DATE: 25-March-2024
0. REASON FOR REVISION
AOT A52W016-24 Rev 00 was originally issued to introduce repetitive inspections in the MDCD bearing 
fitting area.
AOT A52W016-24 Rev 01: 
- Clarification introduced regarding the 70deg operational limitation of the MDCD opening for A/C 
having more than 13000 FC
- Man-hours (M/H) estimation to replace the MDCD bearing fittings has been updated 
The revised paragraphs are indicated between ***BEG. REV*** and ***END REV***
1. AIRCRAFT AFFECTED
All A300, A300-600 and A310 Aircraft (A/C) in serial freighter configuration or converted from Pax-to-
Freighter via AIRBUS Supplemental Type Certificate (STC).
A/C Models: A300 C4-203, A300 F4-203, A300 C4-620, A300 F4-605R, A300 F4-622R and A300 C4-
605R variant F.
AIRBUS STC for Pax-to-Freighter conversion: EASA STC No. 10013960 Rev. 5, EASA STC 10014779 
Rev. 1 and EASA STC 10013945 Rev. 4.
2. REFERENCED DOCUMENTATION
2.1 APPENDIX
Appendix 1: AOT instructions flowchart
Appendix 2: AOT embodiment reporting form
2.2 REFERENCES
Ref.[1] A300-600 Freighter SRM 52-36-00-001 item 270 and 275
Ref.[2] AMM or AMM Supplement 52-36-00 PB 201 MDCD - Maintenance Practices
Ref.[3] AMM or AMM Supplement 52-36-00 PB 1 MDCD - Description and operations
Ref.[4] NTM 51-70-00
Ref.[5] TD/81322793/008/2024 - AMM adaptation for MDCD removal
Ref.[6] TD/81322793/003/2023 - Instruction for replacement of MDCD actuator bearing fittings
Ref.[7] Technical Follow-Up (TFU) 52.36.00007
Ref.[8] OIT 999.0018/16 – ATA 00 – PROCEDURE TO REPORT RESULTS OF  INSPECTION 
SERVICE BULLETINS AND ALERT OPERATORS TRANSMISSIONS

### Page 2

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A52W016-24 Rev 01 Page 2 of 9 Date: 01-JUL-2024
C80_AOT_FM1104649_v8.0 © AIRBUS S.A.S. 2024. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
3. REASON
3.1 FACTS
One A300-600 operator reported to Airbus 3 cases of Main Deck Cargo Door (MDCD) Actuator Bearing 
Fittings (P/Ns A52371123204 and A52371123205 - Ref.[1]) found cracked during C-Check. In one of 
the cases, only one bearing fitting was found cracked. In the two other cases, both bearing fittings were 
found cracked. See Figure 1 for MDCD Actuator Bearing Fittings location and Figure 2 for crack 
location.
Figure 1: MDCD Actuator Bearing Fittings location
Figure 2: MDCD Actuator Bearing Fittings crack location

### Page 3

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A52W016-24 Rev 01 Page 3 of 9 Date: 01-JUL-2024
C80_AOT_FM1104649_v8.0 © AIRBUS S.A.S. 2024. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
3.2 ROOT CAUSE
A fractographic analysis of the failed MDCD Actuator Bearing Fittings revealed that the root cause of 
the failure was fatigue. This has been further confirmed by a Finite Element Model (FEM) analysis.
3.3 CONSEQUENCES
In case of failure of one and/or two MDCD Actuator Bearing Fittings, there is no safety impact in flight 
when the Cargo Door is fully closed, latched and locked.
However, in case both MDCD Actuator bearing fittings are cracked, there is a risk of MDCD undamped 
free fall during MDCD operations or during cargo loading/off-loading, with the MDCD in the open 
position.
4. OBJECTIVES OF THIS AOT
The objective of this AOT is to request repetitive inspections of both MDCD Actuator Bearing Fittings 
as per the compliance time and inspection interval stated in paragraph 5.1.
***BEG. REV***
AOT inspections and cargo operations are limited to 70 degrees normal opening and closing procedure 
of the MDCD as per Ref.[2] and Ref.[3] (wind speed less than 40 knots).
***END REV***
This AOT reminds operators that the warnings and cautions from the AMM Ref.[2] shall be strictly 
obeyed.
5. MAINTENANCE PROCEDURE
NOTE: This AOT is classified mandatory or expected to be classified mandatory by an Airworthiness 
Directive (AD). If the instructions of this AOT are marked as Required for Compliance (RC), the 
operator must follow the instructions as indicated. These instructions are introduced by “in 
accordance with”.
NOTE: The instructions of this AOT include procedures given in other documents or in other sections 
of the AOT. If the instructions of this AOT are NOT marked as Required for Compliance (RC), the 
operator can use an alternative procedure accepted by his/her local authority. These instructions 
are introduced by “refer to”.
NOTE: When this AOT gives the access or close-up instructions with no return to service tests, the 
operator can adapt these instructions to add flexibility to the maintenance operations. The technical 
intent of this AOT must comply with the set parameters.
5.1 PLANNING - RC
The accomplishment of the Detailed Visual Inspection (DET), described in Paragraph 5.4 must be 
done no later than 330 FC from AOT effective date for A/C having accumulated more than 13000 
Flight Cycles (FC), counted from (whichever occurs last):
The Entry Into Service (EIS) for serial freighter A/C,
The MDCD installation for Pax-to-Freighter conversion A/C,
The replacement date of both MDCD bearing fittings.
The accomplishment of the DET, described in Paragraph 5.4 must be repeated every 640 FC.

### Page 4

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A52W016-24 Rev 01 Page 4 of 9 Date: 01-JUL-2024
C80_AOT_FM1104649_v8.0 © AIRBUS S.A.S. 2024. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
***BEG. REV***
Cargo operations are limited to 70 degrees normal opening and closing procedure of the MDCD as per 
Ref.[2] and Ref.[3] (wind speed less than 40 knots) since AOT effective date for A/C above 13000 FC. 
This is no longer needed if the MDCD bearing fittings have been replaced (as per paragraph 5.5).
This limitation is applicable at every MDCD operation for A/C above 13000 FC, not only for the 
inspection.
***END REV***
5.2 MANPOWER
1. The DET described in paragraph 5.4, including access, is estimated to take 0.5 man-hours 
(M/H)
***BEG. REV***
2. The MDCD Actuator bearing fittings replacement, including MDCD removal/installation, is 
estimated to take 500 man-hours (M/H)
***END REV***
5.3 ACCESS
Open the MDCD as per AMM Ref.[3] to gain access to the bearing fittings.
WARNING: WHEN THE MDCD IS OPENED BUT CARGO IS NOT TO BE LOADED, SECURE 
FUSELAGE OPENING WITH THE MDCD NET.
***BEG. REV***
WARNING: MAXIMUM MDCD OPENING ANGLE MUST BE LIMITED TO 70 DEGREES NORMAL 
OPENING AND CLOSING PROCEDURE OF THE MDCD AS PER REF.[2] AND REF.[3] FOR A/C 
ABOVE 13000 FC.
***END REV***
WARNING: IN CASE OF NEED FOR MDCD OPENING AT 145 DEGREES (WIND SPEED LESS 
THAN 10 KNOTS) MONITOR THE NUMBER OF SEQUENCES AND REPORT TO AIRBUS.
WARNING: THE MAIN DECK CARGO DOOR MUST NOT BE OPERATED WHEN THE WIND SPEED 
IS EQUAL OR GREATER THAT 74 KM/H (40 KTS).
After accomplishment of the DET described in paragraph 5.4 and corrective actions described in 
paragraph 5.5, close the MDCD as per AMM Ref.[3].
5.4 INSPECTION – (RC)
1. Clean the inspection area, refer to CML 14SBA1 (lint free cotton) and with a non-aqueous 
cleaner, refer to CML 08BAA9 (non-aqueous cleaner – general). See Figures 3, 4 and 5 for the 
area to be inspected.
2. Do DET as per Ref.[4] on both MDCD bearing fittings.
NOTE: You can use a MIRROR-INSPECTION and a FLASHLIGHT-HIGHPOWER.

### Page 5 (OCR)

AIRBUS
ALERT OPERATORS TRANSMISSION - AOT
• 30
STGR13
Area to be inspected
40
8 Main Frames
Figure 3: Area to be inspected - General view
Areas to be inspected
Auxiliary Frame C24 /
Bearing Fitting
Auxiliary Frame C23 /
Bearing Fitting
Main Frame C24  LONGN 4 STGR12
FR23
Main Frame C23
Figure 4: Area to be inspected - Detailed view I
AOT ref: A52W016-24 Rev 01  Page 5 of 9  Date: 01-JUL-2024
C80_AOT_FM1104649_V8.0  © AIRBUS S.A.S. 2024. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT

### Page 6

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A52W016-24 Rev 01 Page 6 of 9 Date: 01-JUL-2024
C80_AOT_FM1104649_v8.0 © AIRBUS S.A.S. 2024. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
Figure 5: Main Deck Cargo Door Actuation Mechanism – Detailed view II
5.5 FINDINGS - (RC)
***BEG. REV***
In case of no finding, inspection must be repeated as defined in paragraph 5.1 with limited MDCD 
opening angle to 70 degrees normal opening and closing procedure as per Ref.[2] and Ref.[3] (wind 
speed less than 40 knots).
***END REV***
In case of one or two MDCD bearing fitting(s) found cracked, both must be replaced before next flight 
by new ones (same P/N) as per instructions given in Ref.[5] and Ref.[6]. 
5.6 SPARES AND TOOLING
In case the MDCD bearing fittings need to be replaced, the Part Numbers (P/N) to be ordered are the 
following ones:
- P/N A523-71123-002-00 FWD Bearing Fitting Assy (FR23)
- P/N A523-71123-003-00 Rear Bearing Fitting Assy (FR24)
6. ADDITIONAL INFORMATION
6.1 FOLLOW-UP PLAN
It is anticipated that this AOT will be rendered mandatory by issuance of an EASA Airworthiness 
Directive (AD).
Follow-up of this AOT will be ensured by means of Technical Follow-Up (TFU) Ref.[7].
Inspection Service Bulletins (ISB) will be issued to supersede this AOT.

### Page 7

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A52W016-24 Rev 01 Page 7 of 9 Date: 01-JUL-2024
C80_AOT_FM1104649_v8.0 © AIRBUS S.A.S. 2024. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
6.2 IMPACTED DOCUMENTATION
Not applicable.
7. AOT APPROVAL
The technical content of this document is approved under the authority of the DOA ref.EASA.21J.031.
8. REPORTING
Address your inspection results (with or without findings) to AIRBUS Customer Services through the 
generic e-mail address. Refer to the latest reporting policy (OIT 999.0018/16 Ref.[8]). 
Give the AOT reference in the mail title, as follows: A52W016-24 Inspection Result.
You can address your questions about this AOT to AIRBUS Customer Services through TechRequest 
on AIRBUS World, selecting Maintenance & Engineering Domain, Engineering Support Section and 
ATA 52-36.
Best Regards,
Ahmed CHABBOUH
SENIOR DIRECTOR IN-SERVICE 
ENGINEERING
CUSTOMER CARE CENTER
Pascal VIALLETON
HEAD OF A300/A310 PROGRAMME AND CHIEF 
ENGINEER
CUSTOMER SERVICES

### Page 8

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A52W016-24 Rev 01 Page 8 of 9 Date: 01-JUL-2024
C80_AOT_FM1104649_v8.0 © AIRBUS S.A.S. 2024. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
APPENDIX 1 – Instructions flowchart
From the AOT effective date* and within the threshold given in paragraph 5.1, do 
the inspections as detailed in paragraph 5.4
Is there any 
crack or 
damage(s) 
found?
Replace both MDCD 
bearing fittings as per 
TD/81322793/003/2023 
and 
TD/81322793/008/2024
Restore A/C conditions and 
close accesses*
Report to AIRBUS using 
Appendix 2
Yes No
Repeat inspection as per 
interval indicated in 
paragraph 5.1
***BEG. REV***
The operation of the MDCD opening must be limited to 70 degrees normal opening and closing 
procedure as per Ref.[2] and Ref.[3] for A/C above 13000 FC.
***END REV***

### Page 9

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A52W016-24 Rev 01 Page 9 of 9 Date: 01-JUL-2024
C80_AOT_FM1104649_v8.0 © AIRBUS S.A.S. 2024. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
APPENDIX 2 – AOT embodiment reporting form
A/C INFORMATION:
OPERATOR:
A/C MSN:
A/C REGISTRATION:
FLIGHT CYCLES:
DATE OF INSPECTION:
INSPECTION RESULTS:
Finding at FWD MDCD 
Bearing Fitting
(Yes / No)
Finding at Rear MDCD 
Bearing Fitting
(Yes / No)
COMMENTS (free text):

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
