# Airbus All Operators Transmission A53L014-19

Copy: No revision named ("AOT A53L014-19 orig"), 36 pages: PDF https://openairdocs.org/files/sha256/8b/1d/8b1d707e8423ef2a80e3a90992127628087a1ad710cb4e3a76ce305d7e44459a; text https://openairdocs.org/service-documents/airbus/aot-a53l014-19/file/8b1d707e8423.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2020-0106, the docket of AD 2020-15-21. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Other document (All Operators Transmission)
- Number: A53L014-19
- Page: https://openairdocs.org/service-documents/airbus/aot-a53l014-19

## Text (36 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2020-0106, the docket of AD 2020-15-21. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

CUSTOMER SERVICES DIRECTORATE
2 ROND POINT EMILE DEWOITINE
31700 BLAGNAC FRANCE
TELEPHONE + 33 (0)5 61 93 33 33
ALERT OPERATORS TRANSMISSION - AOT
AOT ref: A53L014-19 Rev 00 Page 1 of 4 Date: 17-DEC-2019
© AIRBUS S.A.S. 2019. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
SUBJECT: ATA 53 – INSPECTION OF FUSELAGE FRAME 67 STRINGER 44 RH
AIRCRAFT TYPE: A330
OUR REF.: A53L014-19 Rev 00 dated 17-DEC-2019
1. AIRCRAFT AFFECTED
All A330-200 and A330-300 having cumulated more than 22 200 FC since first flight.
2. REFERENCED DOCUMENTATION
2.1 APPENDIX
Appendix 1. NTM 53-40-17 advance copy rev. APRIL 2020
Appendix 2. AOT reporting sheet
2.2 REFERENCES
Ref 1. MPD 534017-01-1.
Ref 2. NTM 53-40-17 - Bulk Cargo Compartment Door Cut-Out Lateral Frames at Fr67 and Fr69.
Ref 3. AMM 53-41-00-220-867-A - Special Detailed Inspection (HFEC and US) of Bulk Cargo 
Compartment Door Cut-Out Lateral Frames, Fr 69 between Str 33 and 34 and Fr 67 between Str 
35 and Str 40 and between Str 44 and Str 46, Fr 69 between Str 36 and Str 39 and between Str 
45 and Str 47.
Ref 4. AMM 53-41-00-220-884-A - Special Detailed Inspection (Rototest) of Bulk Cargo Compartment 
Door Cut-Out Lateral Frames, Fr 69 between Str 33 and 34 and Fr 67 between Str 35 and Str 40 
and between Str 44 and Str 46, Fr 69 between Str 36 and Str 39 and between Str 45 and Str 47.
Ref 5. AMM Task 53-41-00-220-835-A - Detailed Inspection of Bulk Cargo Compartment Door Cut-Out, 
Visible Part of Lateral Frames (Fr 67 and Fr 69) as far as visible.
3. REASON
The purpose of this AOT is to request repeated detailed visual inspections of fuselage frame 67 at stringer 
44 RH, pending application of the corrected NTM procedure (Appendix 1) called by MPD Ref 1.
3.1 FACTS
In the isometric view (Figure 1) of the NTM (Ref 2) and the AMM (Ref 3 & 4), the stringer 44 RH at frame 
67 is shown incorrectly at location of stringer 43 RH.
Consequently, the inspection could have been potentially accomplished at the wrong location and 
potential damage could remain undetected.

### Page 2

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A53L014-19 Rev 00 Page 2 of 4 Date: 17-DEC-2019
© AIRBUS S.A.S. 2019. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
Wrong stringer 44 RH location on Ref. 2, 3 & 4
 Corrected stringer 44 RH location on Appendix 1
Figure 1- NTM illustration before and after correction
3.2 CONSEQUENCES
This condition, if not detected and not corrected, could lead to cracks and substantial damage on fuselage 
frame 67. While this kind of damage has not been experienced in service, such scenario could lead to the 
loss of the bulk cargo door in flight.
3.3 AIM
The aim of this AOT is to provide instructions for inspection of the concerned area.
3.4 INVESTIGATION
None.
4. SHORT TERM ACTION
NOTE: This AOT is classified mandatory or expected to be classified mandatory by an Airworthiness 
Directive (AD). The accomplishment instructions marked as Required for Compliance (RC) must be done 
to comply with the AD. “RC” is indicating these paragraphs accordingly. 
NOTE: The accomplishment instructions of this AOT include procedures given in other documents or in 
other sections of the AOT. When the words ’refer to’ are used and the operator has a procedure accepted 
by the local authority he belongs to, the accepted alternative procedure can be used. When the words ’in 
accordance with’ are used then the given procedure must be followed.
NOTE: The access and close-up instructions, not comprising return to service tests, in this AOT do not 
constitute or affect the technical intent of the AOT. Operators can therefore, as deemed necessary, omit 
or add access and/or close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the AOT is met within the set parameters.

### Page 3

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A53L014-19 Rev 00 Page 3 of 4 Date: 17-DEC-2019
© AIRBUS S.A.S. 2019. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
4.1 PLANNING AND MANPOWER
4.1.1 RC - ACCOMPLISHMENT TIMESCALE
For all A/C identified in Paragraph 1, perform first inspection as per paragraph 4.2.2 no later than 250 FC 
or 2 months whichever first, from the first issuance date of this AOT.
Repeat the inspection as per paragraph 4.2.2 every 150 FC until next HFEC inspection using updated 
NTM provided by Appendix 1. The HFEC inspection is part of NTM Ref 2.
Embodiment of this AOT is not necessary if you have recorded evidence of NTM 53-40-17 performance 
on the actual stringer 44 position during last inspection called by MPD Ref 1.
4.1.2 MANPOWER
The estimated time to perform detailed visual inspection per frame is estimated at 0.25 MH.
4.2 DESCRIPTION
4.2.1 ACCESS
Open bulk cargo door (Figure 2) as mentioned in AMM Task Ref 5. No parts removal is required.
Figure 2- Location of bulk cargo door
4.2.2 RC - INSPECTION REQUIREMENTS
Perform detailed visual inspection of frame 67 at stringer 44 RH (Figure 3) in accordance with AMM task 
Ref 5.
 
Figure 3- Location of inspection at stringer 44 RH frame 67

### Page 4

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A53L014-19 Rev 00 Page 4 of 4 Date: 17-DEC-2019
© AIRBUS S.A.S. 2019. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
4.2.3 RC - FINDINGS
In case of findings, before next flight, please provide full report of damage to Airbus Customer Services 
Repair Teams trough TechRequest, select Repair Domain, to get instructions.
4.3 SPARES AND TOOLING
None.
5. FURTHER INFORMATION
5.1 FOLLOW-UP PLAN
None.
5.2 IMPACTED DOCUMENTATION
Corrected document provided in Appendix 1 and will be published in April 2020.
6. AOT APPROVAL
The technical content of this document is approved under the authority of DOA nr. EASA.21J.031.
It is anticipated that this AOT will be rendered mandatory.
7. REPORTING
Questions about this AOT and inspection results with or without findings are to be addressed to Airbus 
Customer Services through TechRequest on Airbus World, selecting Engineering Domain and ATA 53-
40 / Topic AOT A53L014-19 Rev 00.
As per latest reporting policy (Ref to OIT 999.0018/16), inspection results (with or without findings) are to 
be addressed to Airbus Customer Services through the generic e-mail address:  
inspection.results@airbus.com.
Best Regards,
Christian FREMONT
VICE PRESIDENT ENGINEERING SUPPORT
CUSTOMER SERVICES
MARCO MANTOVANI ON BEHALF OF THE 
VICE PRESIDENT A330 FAM  PROGRAMME
CUSTOMER SERVICES

### Page 5

ADVANCE COPY 
 
 
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR USE PENDING ISSUE OF THE MANUAL REVISION DATED:  
APR 01/20 
 
 
 
 
 
 
 
 
NOTE:  AIRBUS OIT 999.0134/03 dated 14 NOV 2003 out lines the regulatory aspects of advance data, which are 
authorized for temporary use till the data are released at the indicated issue date of the regular revision service 
Aircraft:  A330/A340 
Manual:   NON-DESTRUCTIVE TESTING MANUAL 
ATA Chapter:  53-40-17 
Effectivity:   A330-200/A330-300/A330-800/A330-900/A 340-200/A340-300 
Issue Date:   December 12/19 
Identifier:   NTM_534017_Advance Copy 
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
1/31

### Page 6

Subject: 53-40-17 BULK CARGO COMPARTMENT DOOR CUT-OUT LATERAL FRAMES AT FR67 AND FR69 (2019-12-12 08:01:55)
Data set: Description Set
** ON A/C ... - (330-900),(330-800),(330-300),(340-300),(330-200),(340-200)
DESCSET: 53-40-17-001-A
Change Description
General revised.
Change Description
Effectivity revised.
TITLE: General
  
A. This procedure includes the inspection of the ALI Task 53-40-17 "Bulk cargo compartment door cut-out lateral frames, FR69 between STGR33 and STGR34 and FR67 between STGR35 and STGR40 and between STGR44 and STGR46, FR69 between STGR36
 and STGR39 and between STGR45 and STGR47".
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
2/31

### Page 7

Subject: 53-40-17 BULK CARGO COMPARTMENT DOOR CUT-OUT LATERAL FRAMES AT FR67 AND FR69 (2019-12-12 08:01:55)
Data set: Description Set
** ON A/C ... - (330-900),(330-800),(330-300),(340-300),(330-200),(340-200)
DESCSET: 53-40-17-002-A
Change Description
Preferred inspection revised.
Change Description
Effectivity revised.
TITLE: Preferred Inspection
  
CAUTION: DO ALL OF THE FOLLOWING TASKS TO COMPLETE THE INSPECTION.
 
  
A. See Task 53-40-17-250-801  for the inspection of the bulk cargo compartment door cut-out lateral frames, FR69 between STGR33 and STGR34 and FR67 between STGR35 and STGR40 and between STGR44 and STGR46, FR69 between STGR36 and STGR39
 and between STGR45 and STGR47, RH.
  
B. See Task 53-40-17-250-802  for the inspection of the bulk cargo compartment door cut-out lateral frames, FR69 between STGR33 and STGR34 and FR69 between STGR45 and STGR47, RH.
  
C. See Task 53-40-17-270-801  for the inspection of the bulk cargo compartment door cut-out lateral frames, FR69 between STGR36 and STGR38, RH.
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
3/31

### Page 8

Subject: 53-40-17 BULK CARGO COMPARTMENT DOOR CUT-OUT LATERAL FRAMES AT FR67 AND FR69 (2019-12-12 08:01:55)
Data set: Task
** ON A/C ... - (330-900), (330-800), (330-300), (340-300), (330-200), (340-200)
TASK: 53-40-17-250-801-A-01
TITLE: Bulk Cargo Compartment Door Cut-Out Lateral Frames at FR67 and FR69
 
1. Task Supporting Data
  
A. Area of Applicability
- Area 1: Bulk cargo compartment door cut-out lateral frames inner flange is to be inspected at FR67 at STGR35, STGR44 and STGR45 and at FR69 at STGR33, STGR36, STGR45 and STGR47, RH (See Figure 53-40-17-001 ).
- Area 2: Bulk cargo compartment door cut-out lateral frames outer flange is to be inspected at FR67 between STGR35 and STGR37 and between STGR44 and STGR46 and at FR69 between STGR36 and STGR38 and between STGR45 and
 STGR47, RH (See Figure 53-40-17-001 ).
NOTE:
Due to unsatisfactory access on AFT side of FR69 between STGR36 and below STGR38, the lining and support strut must be removed (See Figure 53-40-17-015  and see SB 53-3278, SRM 51-42-00 and AMM 53-43-11).
- Area 3: Bulk cargo compartment door cut-out lateral frames web is to be inspected from the non covered side at FR67 between STGR37 and STGR40 and between STGR44 and STGR46 and at FR69 between STGR38 and STGR39 and
 between STGR45 and STGR47, RH (See Figure 53-40-17-001 ).
  
B. Description of possible damage
- Fatigue cracks in the inner flange of the frame measured from the fastener heads/nuts and through the full thickness (See Figure 53-40-17-002 ).
- Fatigue cracks in the outer flange of the frame measured from the fastener heads/nuts and through the full thickness (SeeFigure 53-40-17-002 ).
- Fatigue cracks in the web of the frame measured from the fastener heads/nuts and through the full thickness (See Figure 53-40-17-002 ).
  
C. Reason for the Job
See ALID ALI-TASK-534017-01 .
  
D. Job Setup Information
  
(1) List of Materials
  
(2) List of Tools
PROBE (PAB001200FX) 
PROBE (MP455-60) 
  
(3) List of References
51-10-08-250-802 
51-10-08-250-803 
ALIDALI-TASK-534017-01 
AMM25-54-00PB001 
AMM25-80-00PB201 
 
2. Procedure
  
SUBTASK: ** ON A/C ... - {330-900} {330-800} {330-300} {340-300} {330-200} {340-200}251-001-A
A. Preparation for Inspection
 (1) Use the equipment as described in Task 51-10-08-250-803 .
NOTE:
As an alternative, Task 51-10-08-250-802  can be used.
(2) For inspection on AFT side of the area at FR69 between STGR36 and below STGR38 use the PROBE (PAB001200FX) , 50 - 500 KHz, from EC NDT (See Figure 53-40-17-014 ).
NOTE:
All comparable probes (for example PROBE (MP455-60) , 500 KHz, from olympus) can be used. It must satisfy that the frequency is between 200 KHz - 500 MHz.
(3) Make sure that the lining/panels in the inspection area are removed (See AMM 25-54-00PB001 ).
(4) Make sure that the insulation is removed in the inspection area (See AMM 25-80-00PB201 ).
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
4/31

### Page 9

(5) Make sure that the lining and the support strut at FR69 is removed (See Figure 53-40-17-015 ).
NOTE:
Remove sealant on the frame outer flange before the inspection.
(6) Make sure that the access to do the inspection is clear.
(7) Make sure that the inspection area is clean and smooth.
(8) Do a check of the inspection area for visual damage or discontinuities.
(9) For more preparation see Task 51-10-08-250-803 .
NOTE:
As an alternative, Task 51-10-08-250-802  can be used.
  
SUBTASK: ** ON A/C ... - {330-900} {330-800} {330-300} {340-300} {330-200} {340-200}252-001-A
B. Instrument Adjustment
 (1) See Task 51-10-08-250-803 .
NOTE:
As an alternative, Task 51-10-08-250-802  can be used.
  
SUBTASK: ** ON A/C ... - {330-900} {330-800} {330-300} {340-300} {330-200} {340-200}253-001-A
C. Inspection
 (1) Do a scan around the rivets/nuts and the holes as shown in Figure 53-40-17-003  and as described in Task 51-10-08-250-803 .
NOTE:
As an alternative, Task 51-10-08-250-802  can be used.
(2) Do the scan around the rivets/nuts and on the frame outer flange at FR69 between STGR36 and STGR38 (See Figure 53-40-17-013 ).
NOTE:
For this unsatisfactoried area use PROBE (PAB001200FX) , 50 - 500 KHz, from EC NDT (See Figure 53-40-17-014 ).
NOTE:
All comparable probes (for example PROBE (MP455-60) , 500 KHz, from olympus) can be used. It must satisfy that the frequency is between 200 KHz - 500 MHz.
  
SUBTASK: ** ON A/C ... - {330-900} {330-800} {330-300} {340-300} {330-200} {340-200}971-001-A
D. Acceptance Criteria
 (1) See Task 51-10-08-250-803 .
NOTE:
As an alternative, Task 51-10-08-250-802  can be used.
(2) Record all the results (See Figure 53-40-17-001 ).
(3) Record the data that follows:
(a) Amplitude of the cracks
(b) Direction and length of the cracks
(c) Position of the rivets/nuts/cracks.
 
3. Figures
 
Figure - 53-40-17-001-A
** ON A/C ... - {330-900} {330-800} {330-300} {340-300} {330-200} {340-200}
Inspection Area
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
5/31

### Page 10

FR71 FR69 FR67 FR59
STGR36RH
STGR45RH
STGR40RH
FWDA FR67
COUPLING
STGR35RH
C
FR67
FR69
STGR35RH
STGR37RH
STGR33RH
STGR47RH
STGR45RH
STGR39RH
STGR38RH
STGR36RH
STGR44RH
STGR45RH
STGR47RH
C
B
M
R
N
G
E
D
P
F
K
L
A
B
H
J
Q
NOTE:
THE FRAME SURFACE (INNER FLANGE) AROUND THE RIVETS
FOR REFERENCE ONLY
TO BE INSPECTED FROM THE NON COVERED SIDE FOR INSPECTION AREA 1
FOR DETAIL D AND E (FOR INSPECTION AREA 1)
FOR DETAIL F AND G (FOR INSPECTION AREA 2)
FOR DETAIL H AND J (FOR INSPECTION AREA 1)
FOR DETAIL K AND L (FOR INSPECTION AREA 1)
FOR DETAIL M AND N (FOR INSPECTION AREA 2)
FOR DETAIL P, Q, R AND S  (FOR INSPECTION AREA 3)
SEE SHEET 3
SEE SHEET 5
SEE SHEET 7
STGR46RH
S
SEE SHEET 2
SEE SHEET 4
SEE SHEET 6
STGR42RH
F_NT_534017_1_0010101_01_03
Inspection Area
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
6/31

### Page 11

NOTE:
THE FRAME SURFACE (INNER FLANGE) AROUND THE RIVETS
FOR REFERENCE ONLY
TO BE INSPECTED FROM THE NON COVERED SIDE FOR INSPECTION AREA 1
COUPLING
COUPLING
FR67
FR67
U
PFWD
U
PFWD
D
E
STGR44RH
STGR45RH
F_NT_534017_1_0010102_01_01
Inspection Area 1
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
7/31

### Page 12

NOTE:
THE FRAME SURFACE (OUTER FLANGE) AROUND THE RIVETS
FOR REFERENCE ONLY
TO BE INSPECTED FROM THE NON COVERED SIDE FOR INSPECTION AREA 2
F
G
VIEW FROM INSIDE
VIEW FROM INSIDE
FR67
STGR46RH
STGR44RH
U
P
FWD
U
P
FWD
FR67
STGR35RH
INSPECTION FROM INSIDE
STGR37RH
F_NT_534017_1_0010103_01_02
Inspection Area 2
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
8/31

### Page 13

U
P
FR69
FWD
FR69
COUPLING
U
P
FWD
NOTE:
THE FRAME SURFACE (INNER FLANGE) AROUND
FOR REFERENCE ONLY
THE RIVETS TO BE INSPECTED FROM THE NON 
COVERED SIDE FOR INSPECTION AREA 1
H
J
COUPLING
STGR33RH
STGR36RH
F_NT_534017_1_0010104_01_01
Inspection Area 1
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
9/31

### Page 14

FR69
COUPLING
U
P
FWD
NOTE:
THE FRAME SURFACE (INNER FLANGE) AROUND
FOR REFERENCE ONLY
THE RIVETS TO BE INSPECTED FROM THE NON 
COVERED SIDE FOR INSPECTION AREA 1
FR69
COUPLING UP
FWD
K
L
STGR45RH
STGR47RH
F_NT_534017_1_0010105_01_01
Inspection Area 1
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
10/31

### Page 15

NOTE:
THE FRAME SURFACE (OUTER FLANGE) AROUND THE RIVETS
FOR REFERENCE ONLY
TO BE INSPECTED FROM THE NON COVERED SIDE FOR INSPECTION AREA 2
M
N
VIEW FROM INSIDE
U
P
FWD
VIEW FROM INSIDE
U
P
FWD
FR69
FR69
STGR36RH
STGR38RH
STGR45RH
STGR46RH
STGR47RH
INSPECTION FROM INSIDE F_NT_534017_1_0010106_01_01
Inspection Area 2
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
11/31

### Page 16

STGR36RH
STGR38RH
STGR40RH
FR67
NOTE:
THE FRAME SURFACE (WEB) AROUND THE RIVETS/NUTS 
FOR REFERENCE ONLY
TO BE INSPECTED FROM THE NON COVERED SIDE FOR INSPECTION AREA 3
U
P
INBD
STGR48RH
STGR46RH
STGR44RH
FR67
U
P
INBD
STGR38RH
STGR39RH
U
P INBD
FR69
P
Q
R
STGR44RH
STGR46RH
U
P INBD
S
FR69
F_NT_534017_1_0010107_01_01
Inspection Area 3
 
Figure - 53-40-17-015-A
** ON A/C ... - {330-900} {330-800} {330-300} {340-300} {330-200} {340-200}
Inspection Area FR69 between STGR36 and STGR38
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
12/31

### Page 17

A
FR69
FR70
FOR VIEW D
TO GET ACCESS TO THE INSPECTION AREA
REFER TO SB 53-32-78, SRM 51-42-00 AND AMM 53-43-11
FR69 FR70
STGR36
STGR38
U
P
FWD
FOR ACCESS AND CLEANING OF THE INSPECTION
AREA, THE LINING AND THE SUPPORT STRUT
HAVE TO BE REMOVED.
U
P
RH SHOWN
VIEW FROM INSIDE
INBD
CB
A
RH SHOWN
VIEW FROM INSIDE
B
SEALANT ON FRAME OUTER FLANGE NEEDS TO BE REMOVED
BEFORE INSPECTION ACCORDING AMM
C
SEE SHEET 2
D
NOTE:
F_NT_534017_1_0150101_01_01
Inspection Area FR69 between STGR36 and STGR38
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
13/31

### Page 18

SEALANT ON FRAME OUTER FLANGE NEEDS TO BE REMOVED
BEFORE INSPECTION
AREA TO BE INSPECTED
NOTE:
VIEW FROM INSIDE
D
F_NT_534017_1_0150102_01_00
Possible Sealant in Area FR69 between STGR36 and STGR38
 
Figure - 53-40-17-002-A
** ON A/C ... - {330-900} {330-800} {330-300} {340-300} {330-200} {340-200}
Possible Damage
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
14/31

### Page 19

COUPLING
RH SHOWN
U
PFWD
EXAMPLE
POSSIBLE
CRACKS
FRAME
COUPLING
RIVET
A A
STRINGER
AREA 1
NOTE:
THE FRAME SURFACE (INNER FLANGE) AROUND THE RIVETS
TO BE INSPECTED FROM THE NON COVERED SIDE
FOR REFERENCE ONLY
AA
POSSIBLE
CRACK
POSSIBLE
CRACK
FRAME
TYPICAL
F_NT_534017_1_0020101_01_02
Possible Damage on Inspection Area 1
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
15/31

### Page 20

NOTE:
HOLES TO BE INSPECTED
FOR REFERENCE ONLY
FRAME OUTER FLANGE
SKINPOSSIBLE CRACK
FRAME WEB
A A
RH SHOWN
VIEW FROM INSIDE
U
P
FWD
EXAMPLE
STRINGER
FRAME
A A
TYPICAL
STRINGER
F_NT_534017_1_0020103_01_02
Possible Damage on Inspection Area 2
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
16/31

### Page 21

POSSIBLE CRACKS
NOTE:
FOR REFERENCE ONLY
THE FRAME SURFACE (WEB) AROUND THE RIVETS/NUTS
TO BE INSPECTED FROM THE NON COVERED SIDE
WEB
A A
TYPICAL
A
A
U
P
INBD
POSSIBLE
CRACK
POSSIBLE
CRACK
FRAME
EXAMPLE
RH SHOWN
F_NT_534017_1_0020104_01_01
Possible Damage on Inspection Area 3
 
Figure - 53-40-17-014-A
** ON A/C ... - {330-900} {330-800} {330-300} {340-300} {330-200} {340-200}
Probe PAB001200FX, 50-500KHZ from EC NDT
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
17/31

### Page 22

50-500 kHz
128 mm
(5.040 in)
FLEXIBLE
COPPER SHAFT3.2 mm
(0.126 in)
DIA
F_NT_534017_1_0140101_01_01
Probe PAB001200FX, 50-500KHZ from EC NDT
 
Figure - 53-40-17-003-A
** ON A/C ... - {330-900} {330-800} {330-300} {340-300} {330-200} {340-200}
Inspection Procedure
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
18/31

### Page 23

NOTE:
COUPLING
THE FRAME SURFACE (INNER FLANGE) AROUND THE RIVETS
FOR REFERENCE ONLY
TO BE INSPECTED FROM THE NON COVERED SIDE
SCAN PATH AS NEAR AS POSSIBLE TO THE RIVET HEADS
RH SHOWN
EXAMPLE
U
PFWD
PROBE MOVEMENT
STRINGER
FRAME
F_NT_534017_1_0030101_01_02
Inspection Procedure on Inspection Area 1
 
Figure - 53-40-17-013-A
** ON A/C ... - {330-900} {330-800} {330-300} {340-300} {330-200} {340-200}
Inspection Procedure
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
19/31

### Page 24

PROBE SCAN PATH
THE FRAME SURFACE (OUTER FLANGE) AROUND THE RIVETS
FOR REFERENCE ONLY
TO BE INSPECTED FROM THE NON COVERED SIDE
THE RIVET HEADS NEEDS TO BE INSPECTED
THE USE OF AN ENDOSCOPE FROM LOCAL PROCUREMENT CAN
HELP TO INSPECT THIS AREA
FOR THE INSPECTION OF THIS AREA THE USE OF A
SPECIAL PROBE IS MANDATORY ( SEE FIGURE 53-40-17-991-014)
NOTE:
RH SHOWN
VIEW FROM INSIDE
U
P
FR69
STGR36RH
STGR38RH
FWD
SCAN PATH ON FRAME OUTER FLANGE NEAR TO
THE RIVET HEADS TO DETECT CRACKS GROWING IN AFT DIRECTION
SCAN CAN JUST BE 
PERFORMED ON
AFT SIDE HALF
AROUND THE RIVET HEADS.
SCAN PATH ON FRAME OUTER
FLANGE NEAR TO THE RIVET HEADS/NUTS
TO DETECT CRACKS GROWING IN AFT DIRECTION
U
P
FWD
STRINGER
FRAME
RH SHOWN
VIEW FROM INSIDE
EXAMPLE
INSPECTION PROCEDURE IS
 APPLICABLE FOR OTHER FRAME
 IN INSPECTION AREA 2
ONLY APPLICABLE FOR FR69 BETWEEN
STGR36RH THRU STGR38RH
STRINGER
STRINGER
F_NT_534017_1_0130101_01_02
Inspection Procedure on Inspection Area 2
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
20/31

### Page 25

NOTE:
FOR REFERENCE ONLY
THE FRAME SURFACE (WEB) AROUND THE RIVETS/NUTS
TO BE INSPECTED FROM THE NON COVERED SIDE FOR INSPECTION AREA 3
PROBE SCAN PATH (NEAR AS POSSIBLE TO THE RIVETS/NUTS)
U
P
INBD
EXAMPLE
RH SHOWN
FRAME
F_NT_534017_1_0130102_01_01
Inspection Procedure on Inspection Area 3
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
21/31

### Page 26

Subject: 53-40-17 BULK CARGO COMPARTMENT DOOR CUT-OUT LATERAL FRAMES AT FR67 AND FR69 (2019-12-12 08:01:55)
Data set: Task
** ON A/C ... - (330-900), (330-800), (330-300), (340-300), (330-200), (340-200)
TASK: 53-40-17-250-802-A-01
Change Description
Effectivity revised.
Change Description
1. B.  revised.
TITLE: Bulk Cargo Compartment Door Cut-out Lateral Frames at FR67 and FR69
 
1. Task Supporting Data
  
A. Area of Applicability
Bulk cargo compartment door cut-out lateral frames (tooling/RIS holes) at FR69 between STGR33 and STGR34 and between STGR46 and STGR47, RH (See Figure 53-40-17-004 ).
  
B. Description of possible damage
Fatigue cracks that start from the tooling/RIS holes of the lateral frame layer and extend in the full thickness of the frame (See Figure 53-40-17-005 ).
  
C. Reason for the Job
See ALID ALI-TASK-534017-01 .
  
D. Job Setup Information
  
(1) List of Materials
  
(2) List of Tools
  
(3) List of References
51-10-01-250-801 
51-10-07-250-801 
ALIDALI-TASK-534017-01 
AMM25-80-00PB201 
 
2. Procedure
  
SUBTASK: ** ON A/C ... - {330-900} {330-800} {330-300} {340-300} {330-200} {340-200}251-002-A
A. Preparation for Inspection
Change Description
Subtask 251-002  Preparation for inspection revised.
 (1) Use the equipment as described in Task 51-10-01-250-801 .
(2) Make sure that the insulation is removed in the inspection area (See AMM 25-80-00PB201 ).
(3) Make sure that the inspection area is clean and smooth.
(4) Do a check of the inspection area for visual damage or discontinuities.
(5) For more preparation see Task 51-10-01-250-801 .
  
SUBTASK: ** ON A/C ... - {330-900} {330-800} {330-300} {340-300} {330-200} {340-200}252-002-A
B. Instrument Adjustment
 (1) See Task 51-10-01-250-801 .
  
SUBTASK: ** ON A/C ... - {330-900} {330-800} {330-300} {340-300} {330-200} {340-200}253-002-A
C. Inspection
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
22/31

### Page 27

Change Description
Subtask 253-002  Inspection revised.
 (1) Do the rotating probe inspection with the cargo compartment door in open position (See Figure 53-40-17-017  and Task 51-10-01-250-801 ).
(2) Measure the length of surface breaking cracks as described in Task 51-10-07-250-801 .
  
SUBTASK: ** ON A/C ... - {330-900} {330-800} {330-300} {340-300} {330-200} {340-200}971-002-A
D. Acceptance Criteria
Change Description
Subtask 971-002  Acceptance criteria revised.
 (1) See Task 51-10-01-250-801 .
(2) Record all the results (See Figure 53-40-17-004 ).
(3) Record the data that follows:
(a) Amplitude of the cracks
(b) Direction of the cracks
(c) Position of the fastener/cracks.
 
3. Figures
 
Figure - 53-40-17-004-A
** ON A/C ... - {330-900} {330-800} {330-300} {340-300} {330-200} {340-200}
Change Description
Figure 1  revised.
Inspection Area
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
23/31

### Page 28

FR71 FR69 FR67 FR59
STGR36RH
STGR45RH
FWD A
STGR48RH
STGR47RH
STGR46RH
STGR32RH
STGR33RH
STGR34RH
U
P
INBD
U
P
INBD
B
C
FR69
FR69
C
B
RH SHOWN
FRAME
A A
FOR REFERENCE ONLY
THE FRAME AT TOOLING / RIS HOLES
TO BE INSPECTED
NOTE:
INSPECTION AREA
A
A
A
A
TYPICAL
A
F_NT_534017_1_0040101_01_01
Inspection Area
 
Figure - 53-40-17-005-A
** ON A/C ... - {330-900} {330-800} {330-300} {340-300} {330-200} {340-200}
Change Description
Figure 2  revised.
Possible Damage
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
24/31

### Page 29

RH SHOWN
RH SHOWN
U
P
INBD
U
P
INBD
EXAMPLE
EXAMPLE
A
A
A
A
FR69
FR69
STGR48RH
STGR47RH
STGR46RH
STGR32RH
STGR33RH
STGR34RH
FRAME
POSSIBLE CRACK
POSSIBLE CRACK
POSSIBLE CRACKS
POSSIBLE CRACKS
FOR REFERENCE ONLY
NOTE:
A A
TYPICAL
F_NT_534017_1_0050101_01_02
Possible Damage
 
Figure - 53-40-17-017-A
** ON A/C ... - {330-900} {330-800} {330-300} {340-300} {330-200} {340-200}
Inspection Procedure
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
25/31

### Page 30

RH SHOWN
RH SHOWN
U
P
INBD
U
P
INBD
EXAMPLE
EXAMPLE
A
A
A
A
FRAME
FR69
FR69
STGR48RH
STGR47RH
STGR46RH
STGR32RH
STGR33RH
STGR34RH
A A
FOR REFERENCE ONLY
NOTE:
PROBE MOVEMENT
TYPICAL
F_NT_534017_1_0170101_01_00
Inspection Procedure
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
26/31

### Page 31

Subject: 53-40-17 BULK CARGO COMPARTMENT DOOR CUT-OUT LATERAL FRAMES AT FR67 AND FR69 (2019-12-12 08:01:55)
Data set: Task
** ON A/C ... - (330-900), (330-800), (330-300), (340-300), (330-200), (340-200)
TASK: 53-40-17-270-801-A-01
TITLE: Bulk Cargo Compartment Door Cut-Out Lateral Frames at FR67 and FR69
 
1. Task Supporting Data
  
A. Area of Applicability
Bulk cargo compartment door cut-out lateral frames inner flange is to be inspected at FR69 at STGR36, RH (See Figure 53-40-17-009 ).
  
B. Description of possible damage
Fatigue cracks in the frame, at the multi layered joint structure, that start from the fastener hole in the covered frame inner flange and through the full thickness of the frame inner flange (See Figure 53-40-17-010 ).
  
C. Reason for the Job
See ALID ALI-TASK-534017-01 .
  
D. Job Setup Information
  
(1) List of Materials
  
(2) List of Tools
  
(3) List of References
51-10-13-270-801 
ALIDALI-TASK-534017-01 
AMM25-54-00PB001 
AMM25-80-00PB201 
 
2. Procedure
  
SUBTASK: ** ON A/C ... - {330-900} {330-800} {330-300} {340-300} {330-200} {340-200}271-001-A
A. Preparation for Inspection
 (1) Use the equipment as described in Task 51-10-13-270-801 .
(2) Make sure that the lining/panels in the inspection area are removed (See AMM 25-54-00PB001 ).
(3) Make sure that the insulation in the inspection area is removed (See AMM 25-80-00PB201 ).
(4) Make sure that the inspection area is clean and smooth.
(5) Do a check of the inspection area for visual damage or discontinuities.
(6) For more preparation see Task 51-10-13-270-801 .
  
SUBTASK: ** ON A/C ... - {330-900} {330-800} {330-300} {340-300} {330-200} {340-200}272-001-A
B. Instrument Adjustment
 (1) See Task 51-10-13-270-801 .
  
SUBTASK: ** ON A/C ... - {330-900} {330-800} {330-300} {340-300} {330-200} {340-200}273-001-A
C. Inspection
 (1) Do the inspection from inside.
(2) Slide and swivel the search unit as shown in Figure 53-40-17-011  and as described in Task 51-10-13-270-801 .
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
27/31

### Page 32

SUBTASK: ** ON A/C ... - {330-900} {330-800} {330-300} {340-300} {330-200} {340-200}971-003-A
D. Acceptance Criteria
 (1) See Task 51-10-13-270-801 .
(2) Record all the results (See Figure 53-40-17-009 ).
(3) Record the data that follows:
(a) Amplitude of the cracks
(b) Direction and length of the cracks
(c) Position of the rivets/cracks.
  
SUBTASK: ** ON A/C ... - {330-900} {330-800} {330-300} {340-300} {330-200} {340-200}943-001-A
E. Final NDT Requirements
 (1) Remove the couplant and clean the inspection surface.
 
3. Figures
 
Figure - 53-40-17-009-A
** ON A/C ... - {330-900} {330-800} {330-300} {340-300} {330-200} {340-200}
Inspection Area
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
28/31

### Page 33

B
A
FR71 FR69 FR67 FR59
STGR36RH
STGR45RH
STGR40RH
FWD A
FR67
FR69
STGR35RH
STGR37RH
STGR33RH
STGR47RH
STGR45RH
STGR39RH
STGR38RH
STGR36RH
STGR44RH
STGR45RH
STGR47RH
B
C
NOTE:
THE FRAME SURFACE (INNER FLANGE) AROUND THE FASTENER
FOR REFERENCE ONLY
TO BE INSPECTED
STGR36RH
FR69
COUPLING
U
P
FWD
C
STGR42RH
F_NT_534017_1_0090101_01_03
Inspection Area
 
Figure - 53-40-17-010-A
** ON A/C ... - {330-900} {330-800} {330-300} {340-300} {330-200} {340-200}
Possible Damage
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
29/31

### Page 34

NOTE:
THE FRAME SURFACE (INNER FLANGE) AROUND THE RIVET
FOR REFERENCE ONLY
TO BE INSPECTED
STGR36
FR69
COUPLING
U
P
FWD
AA
CRACKS
POSSIBLE
FRAME 
COUPLING
RIVET
POSSIBLE CRACK
A A
POSSIBLE CRACK
F_NT_534017_1_0100101_01_01
Possible Damage
 
Figure - 53-40-17-011-A
** ON A/C ... - {330-900} {330-800} {330-300} {340-300} {330-200} {340-200}
Inspection Procedure
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
30/31

### Page 35

STGR36
FR69
COUPLING
U
P
FWD
A
SWIVEL MOVEMENT 20° - 30°
THE RIVET TO BE INSPECTED
NOTE:
THE FRAME SURFACE (INNER FLANGE) AROUND
SLIDING MOVEMENT
POSSIBLE CRACK IN FRAME (COVERED LAYER)
FOR REFERENCE ONLY
FRAME
SEARCH UNIT
FRAME COUPLING
A A
A
A
A
F_NT_534017_1_0110101_01_01
Inspection Procedure
THE DATA GIVEN IN THIS ADVANCE COPY IS APPROVED FOR
USE PENDING ISSUE OF THE MANUAL REVISION DATED: APRIL 2020
Effectivity: A330-200/A330-300/A330-800/A330-900/A340-200/A340-300
53-40-17
printed in Germany
31/31

### Page 36

AOT A53L014-19 Rev 00 
 
Appendix 2: AOT reporting sheet 1 
 
DATE OF INSPECTION: 
 
A/C MSN: FLIGHT CYCLES: 
A/C TYPE: FLIGHT HOURS: 
A/C REGISTRATION: OPERATOR: 
 
In case of finding precise crack length and depth. 
 
In case of no finding indicate it with “NIL” 
 
 Finding 
 
 
 
 
Frame 67 Stringer 44 RH

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
