# Airbus Alert Operators Transmission A53N006-14

Copy: No revision named ("U.S. DOT/FAA - AOT A53N006-14"), 3 pages: PDF https://openairdocs.org/files/sha256/cf/9b/cf9b5bdbf44a50cf4146f902116c77e00d2729ae668de168299a1d42fa5e2020; text https://openairdocs.org/service-documents/airbus/aot-a53n006-14/file/cf9b5bdbf44a.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2014-0486; AD 2014-15-16 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Other document (Alert Operators Transmission)
- Number: A53N006-14
- Page: https://openairdocs.org/service-documents/airbus/aot-a53n006-14

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2014-15-16](https://openairdocs.org/ad/2014-15-16.md), effective Aug 18, 2014: No revision named

## Text (3 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2014-0486; AD 2014-15-16 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

CUSTOMER SERVICES DIRECTORATE
1 ROND POINT MAURICE BELLONTE
31707 BLAGNAC CEDEX FRANCE
TELEPHONE + 33 (0)5 61 93 33 33
ALERT OPERATORS TRANSMISSION - AOT
AOT ref: A53N006-14 Page 1 of 3 Date: 13-MAY-2014
© AIRBUS S.A.S. 2014. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
SUBJECT: ATA  53 –  Inspection for Missing Fasteners at FR24 RH Side between STR17 & STR18
AIRCRAFT TYPE:  A319,A320,A321
OUR REF.:  A53N006-14 dated  13-MAY-2014.
1. AIRCRAFT AFFECTED
MSN 5230 to 5254; 5256 to 5294; 5296 to 5300
2. REFERENCED DOCUMENTATION
2.1 APPENDIX
Appendix A.Fasteners location
Appendix B.Flowchart
2.2 REFERENCES
Ref. 1. SRM 53-21-12 PB 001 Fig 001 item 60
Ref. 2. Service Bulletin A320-53-1285 rev. 00 dated Jan 29/14
Ref. 3. NTM 51-90-00
Ref. 4. NTM 51-10-08
Ref. 5. SRM 51-75-11
3. REASON
3.1 FACTS
During a VIP cabin customisation, several fasteners and one angle (PN D532-30065-201-03 identified in 
Ref. 1.) were found missing at FR24 Right Hand side between STR17 and STR18. A quality 
investigation has shown that the following MSN are potentially impacted by the same issue:
MSN 5230 to 5254; 5256 to 5294; 5296 to 5300.
3.2 CONSEQUENCES
Non-installation of the angle and fasteners may affect the structural integrity of the circumferential joint 
and surrounding area: fatigue analysis has set up a threshold (TH) of 3300 FC for possible crack 
initiation without this angle.
3.3 AIM
The aim of this AOT is to call for a one-time Detailed Inspection (DET) in order to detect any missing 
fastener at FR24 RH side between STR17-STR18. The latest fatigue analysis results are not sufficient 
to demonstrate TH provided in SB Ref. 2.
Some of potentially affected A/C have already reached the revised TH of 3300 FC and need to be 
inspected trough this AOT, which aims at the same inspection, before SB Ref. 2. revision.

### Page 2

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A53N006-14 Page 2 of 3 Date: 13-MAY-2014
© AIRBUS S.A.S. 2014. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
4. SHORT TERM ACTION
4.1 PLANNING AND MANPOWER
4.1.1 ACCOMPLISHMENT TIMESCALE
Instructions provided in this AOT must be applied within 60 FC from AOT issuance date since potentially 
affected A/C have already reached the revised TH of 3300 FC.
4.1.2 MANPOWER
The manpower estimates given in this AOT are based on the direct labour cost to do the work. These 
estimates assume that the work will be done by experienced personnel, and may need to be revised 
upwards to suit operator’s circumstances. The estimates do not include the time to prepare, plan or 
inspect the work. Manufacturing and procurement of parts and tools, drying times for paints, sealants, 
etc., and general administration work are also not included.
The estimated time to get access, perform the inspection and close-up is 1 MH.
4.2 DESCRIPTION
4.2.1 ACCESS
WARNING: Be careful when you use consumable materials. Obey the material manufacturer's 
instructions and your local regulations.
Put ACCESS PLATFORM 4M (13 FT) in position at zone 230 at level of fuselage external RH side, 
FR24.
4.2.2 INSPECTION REQUIREMENTS
Please refer to Appendix A. for location of possible missing fasteners and to Appendix B. for inspection 
flowchart.
Perform a DET as per Ref. 3. for missing fasteners. If necessary use a flashlight flush to fuselage skin in 
order to detect rivet heads.
If fasteners presence / absence cannot be confirmed by the DET, one of the two further inspection steps 
has to be applied:
- Perform HFEC inspection of the area as per Ref. 4.
- Or perform local sanding as per Ref. 5. and do a DET as per Ref. 3.
4.2.3 FINDINGS
Missing fasteners reported in the area corresponds to a non-installation of the angle. In case of missing 
fasteners confirmation, embody SB Ref. 2. before next flight.
In case of other findings (such as crack discovered during the inspection), please contact Airbus before 
next flight to get further instructions: 
SEOE1/SEOE2/SEOE3 
Customer Services
Fax: +33 (0)5 61 93 28 73

### Page 3

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A53N006-14 Page 3 of 3 Date: 13-MAY-2014
© AIRBUS S.A.S. 2014. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
Mailto: 
region1.StructureRepairSupport@airbus.com 
region2.StructureRepairSupport@airbus.com  
region3.StructureRepairSupport@airbus.com  
Or for AOG request 
AIRTAC (Airbus Technical AOG Center) 
Customer Services 
Phone: +33 (0)5 61 93 34 00 
Fax: +33 (0)5 61 93 35 00 
Mailto: airtac@airbus.com 
4.3 SPARES AND TOOLING
Information about spares and tooling for missing angle installation is available in SB Ref. 2. content.
5. FURTHER INFORMATION
5.1 FOLLOW-UP PLAN
A new revision (rev. 01) of SB Ref. 2. will be issued to cancel and supersede this AOT including:
- Inspection requirements depicted in this AOT,
- Updated TH of 3300 FC.
5.2 IMPACTED DOCUMENTATION
N/A
6. AOT APPROVAL
The technical content of this document is approved under the authority of DOA nr. EASA.21J.031.
7. REPORTING
Questions about this AOT and inspection results with or without findings are to be sent to Airbus 
Customer Services engineering as soon as possible, after the AOT application, to the attention of:
Emeric MEVEL
Structure Engineer
Structure Engineering Support – SEES1
CUSTOMER SERVICES
Phone: +33(0)5 67 19 02 41
Fax: +33(0)5 61 93 36 14 
Mailto: emeric.mevel@airbus.com
Best Regards,
Jean-Luc MOUYSSET
VICE PRESIDENT ENGINEERING SUPPORT
CUSTOMER SERVICES
Gilles DE-CEVINS
VICE PRESIDENT A320  PROGRAMME
CUSTOMER SERVICES

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
