# Airbus All Operators Transmission A53N007-14

Copy: No revision named ("A53N007-14"), 9 pages: PDF https://openairdocs.org/files/sha256/4c/a2/4ca2c4b5deea84b69df531deb486f25c9cc087d708436320288a0dcd3afab689; text https://openairdocs.org/service-documents/airbus/aot-a53n007-14/file/4ca2c4b5deea.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2015-3635; AD 2016-12-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Other document (All Operators Transmission)
- Number: A53N007-14
- Page: https://openairdocs.org/service-documents/airbus/aot-a53n007-14

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2017-12-13](https://openairdocs.org/ad/2017-12-13.md), effective Jul 25, 2017: No revision named
- [AD 2016-12-04](https://openairdocs.org/ad/2016-12-04.md), effective Jul 20, 2016: No revision named

Also cited in [2 proposed ADs](https://openairdocs.org/service-documents/airbus/aot-a53n007-14/proposed.md).

## Text (9 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2015-3635; AD 2016-12-04 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

CUSTOMER SERVICES DIRECTORATE 
1 ROND POINT MAURICE BELLONTE 
31707 BLAGNAC CEDEX FRANCE 
TELEPHONE + 33 (0)5 61 93 33 33 
ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A53N007-14 Page 1 of 9 Date: 22/07/2014 
© AIRBUS S.A.S. 2014. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT 
 
 
SUBJECT: ATA 53 – One-time inspection requirements for external repairs on 1.2 mm fuselage skin 
  
 
AIRCRAFT TYPE: A319, A320, A321  
 
 
OUR REF.: A53N007-14 dated 22/07/2014. 
 
 
1. AIRCRAFT AFFECTED 
 
A319-100, A320-200, A321-100, A321-200  
 
2. REFERENCED DOCUMENTATION 
 
2.1 APPENDIX 
 
APPENDIX 1: Tables of SRM affected repairs  
 
APPENDIX 2: A319 zoning figures of 1.2mm skin thickness panels 
 
APPENDIX 3: A320 zoning figures of 1.2mm skin thickness panels 
 
APPENDIX 4: A321 zoning figures of 1.2mm skin thickness panels 
 
 
2.2 REFERENCES 
 
Ref.1:  A319/A320/A321 SRM 
• 53-00-11 PB201 
• 53-11-11 PB201 
• 53-21-11 PB201 
• 53-41-11 PB201 
 
Ref.2:  A319/A320/A321 NTM 
• 51-10-15-270-801-A-01  
 
Ref.3:  A319/A320/A321 NTM 
• 51-90-00-002-A 
 
Ref.4:  A319/A320/A321 NTM 
• 51-10-08-250-803-A-01 
 
Ref.5:  A319/A320/A321 NTM 
• 51-10-16-250-801-A-01 
 
Ref.6: A319/A320/A321 AMM 
• 53-35-13

### Page 2

AALLEERRTT  OOPPEERRAATTOORRSS  TTRRAANNSSMMIISSSSIIOONN  --  AAOOTT  
 
AOT ref: A53N007-14 Page 2 of 9 Date: 22/07/2014  
© AIRBUS S.A.S. 2014. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT 
 
3. REASON 
 
3.1 FACTS 
 
During A320 family Extended Service Goal full scale fatigue t ests, findings were seen at external skin 
repairs completed per SRM.  It was determined that the inspection thresholds defined in accordance to 
the current SRM are insufficient to detect such findings. 
 
The findings were limited to 1.2mm fuselage skin (refer to appendix 2, 3 and 4) and cover for all cut-out 
external repairs. 
The internal repairs are not affected. 
 
The cracks are not detectable with General Visual Inspection (GVI) from outside. 
 
3.2 CONSEQUENCES 
 
Non-detection of cracks may affect the structural integrity of the repaired fuselage skin. 
 
3.3 AIM 
 
The aim of this AOT is to call for: 
• One time inspection in order to detect any cracks on 1.2 mm fuselage skin on Sections 11, 12, 
13, 14, 16 and 17 further to external doubler repairs embodied as: 
o SRM (all revisions) 
o All RDAS issued before 01 January 2005 
o Permanent RDAS with inspections (Repair Category “B”) issued 
 After 01 January 2005  
 Before 01 July 2014 
o Concessions 
o Modifications based on the same principle (e.g. antenna doubler) 
o Repair approved outside Airbus DOA 
• An update of SRM threshold inspection requirements  
 
The inspection thresholds (TH) for possible crack initiation have been calculated by fatigue analysis. 
 
Note: Inspection intervals defined at the time of repair embodiment in the SRM, RDAS or concession 
remain valid for next repetitive inspections following this one time AOT inspection. 
 
Note: Doubler repairs impacted by this AOT are related to the skin thickness value in fastener areas:

### Page 3

AALLEERRTT  OOPPEERRAATTOORRSS  TTRRAANNSSMMIISSSSIIOONN  --  AAOOTT  
 
AOT ref: A53N007-14 Page 3 of 9 Date: 22/07/2014  
© AIRBUS S.A.S. 2014. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT 
 
Fuselage sections to be inspected are (refer to appendix 2, 3 and 4): 
 
A319 
• Sections 11 and 12 (Frame 1 thru 24) 
• Sections 13 and 14 (Frame 24 thru 35) 
• Sections 16 and 17 (Frame 47/51 thru 64) 
 
A320 
• Sections 11 and 12 (Frame 1 thru 24) 
• Sections 13 and 14 (Frame 24 thru 35) 
• Sections 16 and 17 (Frame 47 thru 64) 
 
A321 
• Sections 11 and 12 (Frame 1 thru 24) 
• Sections 13 and 14 (Frame 24 thru 35.8) 
• Sections 16 and 17 (Frame 47.5 thru 64)

### Page 4

AALLEERRTT  OOPPEERRAATTOORRSS  TTRRAANNSSMMIISSSSIIOONN  --  AAOOTT  
 
AOT ref: A53N007-14 Page 4 of 9 Date: 22/07/2014  
© AIRBUS S.A.S. 2014. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT 
 
4. SHORT TERM ACTION 
 
Operators must inspect any external doubler repairs in sections listed on paragraph 3.3 that have been 
applied through RDAS, concessions and /or as per SRM repairs defined in Appendix 1. 
 
External doubler repairs installed on the aircraft can be identified through available operator 
documentation or through inspection of the aircraft. 
 
4.1 PLANNING AND MANPOWER 
 
4.1.1 ACCOMPLISHMENT TIMESCALE 
 
Inspection must be accomplished as per timescale detailed in paragraphs 4.1.1.b and 4.1.1.c. 
The AOT one time inspection per Ref. 2, can be repetitively postponed if inspections with nil findings are 
accomplished with a threshold and interval as follows: 
Doubler Width  DVI per Ref 3 HFEC per Ref 4  
≤160 mm 100 FC  200 FC 
160 mm< Width ≤185 mm 50 FC 130 FC 
 
Note: DVI per Ref 3 and HFEC per Ref 4 aim at detecting a crack that grows out of the doubler into the 
free skin area. 
 
a. Definitions: 
 
• SMALL skin repairs: Maximum cut-out to 2 fasteners pitch. 
• LIMITED skin repairs: Maximum cut-out limited to a length of half a frame bay and a width of 
one stringer bay. 
• UNLIMITED skin repairs: Cut-out beyond SMALL and LIMITED skin repairs requirements. 
 
b. SMALL and LIMITED skin repairs: 
Note: Doubler thickness measurement is under operators responsibility. 
 
Note: I n case,  repair records are not available then AOT inspections requirements must be 
considered from aircraft first flight. 
 
• For all aircrafts and fuselage sections except A319 and A321 S16/17 above window line 
Compliance time 
For Doubler with thickness > 1.4mm, at the latest of the 3 conditions: 
• 33400FC from repair embodiment  
or 
• 1500 FC from AOT issuance without exceeding 36400 FC from repair embodiment 
or 
• 350 FC from AOT issuance 
 
For Doubler with thickness = 1.4mm, at the latest of the 3 conditions: 
• 45000FC from repair embodiment  
or 
• 1500 FC from AOT issuance without exceeding 49100 FC from repair embodiment 
or 
• 350 FC from AOT issuance 
Table 3 – SMALL and LIMITED skin repairs (except A319/A321 S16/17 above window line)

### Page 5

AALLEERRTT  OOPPEERRAATTOORRSS  TTRRAANNSSMMIISSSSIIOONN  --  AAOOTT  
 
AOT ref: A53N007-14 Page 5 of 9 Date: 22/07/2014  
© AIRBUS S.A.S. 2014. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT 
 
• For A319 and A321 Section 16/17 above window line: 
Compliance time 
For Doubler with thickness > 1.4mm, at the latest of the 3 conditions: 
• 29500FC from repair embodiment  
or 
• 1500 FC from AOT issuance without exceeding 32000 FC from repair embodiment 
or 
• 350 FC from AOT issuance 
 
For Doubler with thickness = 1.4mm, at the latest of the 3 conditions: 
• 39800FC from repair embodiment  
or 
• 1500 FC from AOT issuance without exceeding 43200 FC from repair embodiment  
or 
• 350 FC from AOT issuance 
 
Table 4 – SMALL and LIMITED skin repairs on A319/A321 S16/17 above window line

### Page 6

AALLEERRTT  OOPPEERRAATTOORRSS  TTRRAANNSSMMIISSSSIIOONN  --  AAOOTT  
 
AOT ref: A53N007-14 Page 6 of 9 Date: 22/07/2014  
© AIRBUS S.A.S. 2014. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT 
 
 
c. UNLIMITED skin repairs: 
Note: Doubler thickness measurement is under operators responsibility. 
 
Note: I n case repair records are not available then AOT inspections requirements must be 
considered from aircraft first flight. 
 
• For all A/C and fuselage sections except A319 and A321 S16/17 above window line: 
Compliance time 
For Doubler with thickness > 1.4mm, at the latest of the 2 conditions: 
• 28700FC from repair embodiment  
or 
• 350 FC from AOT issuance 
 
For Doubler with thickness = 1.4mm, at the latest of the 2 conditions: 
• 38700FC from repair embodiment  
or 
• 350 FC from AOT issuance 
 
Table 5 – UNLIMITED skin repairs (except A319/A321 S16/17 above window line) 
 
• For A319 Section 16/17 above window line: 
Compliance time 
For Doubler with thickness > 1.4mm, at the latest of the 2 conditions: 
• 26100FC from repair embodiment  
or 
• 350 FC from AOT issuance 
 
For Doubler with thickness = 1.4mm, at the latest of the 2 conditions: 
• 35200FC from repair embodiment  
or 
• 350 FC from AOT issuance 
 
Table 6 – UNLIMITED skin repairs on A319 S16/17 above window line 
 
• For A321 Section 16/17 above window line: 
Compliance time 
For Doubler with thickness > 1.4mm, at the latest of the 2 conditions: 
• 25200FC from repair embodiment  
or 
• 350 FC from AOT issuance 
 
For Doubler with thickness = 1.4mm, at the latest of the 2 conditions: 
• 34000FC from repair embodiment  
or 
• 350 FC from AOT issuance 
 
Table 7 – UNLIMITED skin repairs on A321 S16/17 above window line

### Page 7

AALLEERRTT  OOPPEERRAATTOORRSS  TTRRAANNSSMMIISSSSIIOONN  --  AAOOTT  
 
AOT ref: A53N007-14 Page 7 of 9 Date: 22/07/2014  
© AIRBUS S.A.S. 2014. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT 
 
  
4.1.2 MANPOWER 
 
The manpower to perform  this AOT could vary depending the aircraft situation, from repairs records 
review only through to repair replacement if needed. 
 
 
4.2 DESCRIPTION 
 
4.2.1 ACCESS 
 
WARNING: Be careful when you use consumable materials. Obey the material manufacturer's  
instructions and your local regulations. 
 
Access to skin fuselage underneath belly fairing panel 191AT as per AMM Ref 6. Procedure 53- 35-13 
May 2014 revision or subsequent ones. 
 
4.2.2 INSPECTION REQUIREMENTS 
 
Inspection is aiming to detect crack on skin underneath the doubler repair on fasteners area (no fastener 
removal is necessary). 
 
Inspection of the repairs embodied through RDAS, concessions and /or the SRM repairs has to be 
performed in accordance with May 2014 revision or subsequent ones of the: 
• External inspection per NTM (Ref.2) procedure 51-10-15-270-801-A-01 “Inspection for Shallow 
Cracks in Multi-Layered Joint Structures” 
or 
• Internal inspection per NTM (Ref.5) procedure 51- 10-16-250-801-A-01 “Inspection for Sub-
Surface Cracks in Al-Alloy Structure”. 
 
Repetitively inspections aiming at postponing one time inspections have to be performed in accordance 
with May 2014 revision of the NTM Ref.3 or Ref. 4 or subsequent ones. 
 
Note: Removal of the repair sealant could be necessary when performing referenced NTM procedures.

### Page 8

AALLEERRTT  OOPPEERRAATTOORRSS  TTRRAANNSSMMIISSSSIIOONN  --  AAOOTT  
 
AOT ref: A53N007-14 Page 8 of 9 Date: 22/07/2014  
© AIRBUS S.A.S. 2014. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT 
 
4.2.3 FINDINGS 
 
a. SMALL and LIMITED skin repairs: 
 
• In case of no findings on skin then inspection intervals and methods remain applicable if any. 
 
Note: Operators have the possibility to re-life the embodied repairs: 
o Remove doubler repair per S RM standard practices in order to determine the exact 
damage size and report details to Airbus. 
o Perform new repair according to SRM or RDAS, by increasing the cut -out to next 
possible size or contact Airbus for specific RDAS. 
 
• In case of findings on skin then operators should before next flight: 
o Remove doubler repair per S RM standard practices in order to determine the exact 
damage size and report details to Airbus. 
o Perform new repair according to SRM or RDAS, by increasing the cut -out to next 
possible size (without waiting Airbus feedback) or contact Airbus for specific RDAS. 
or 
o Contact Airbus for specific RDAS. 
 
b. UNLIMITED skin repairs: 
-For repair that has accumulated less than 20 000FC, in case of no findings on skin t hen 
inspection intervals and methods remain applicable if any. 
 
-In all other cases, contact Airbus repairs daily support for further instructions. 
 
SEOE1/SEOE2/SEOE3 
Customer Services 
Fax: +33 (0)5 61 93 28 73 
 
Mailto: 
region1.StructureRepairSupport@airbus.com  
region2.StructureRepairSupport@airbus.com  
region3.StructureRepairSupport@airbus.com

### Page 9

AALLEERRTT  OOPPEERRAATTOORRSS  TTRRAANNSSMMIISSSSIIOONN  --  AAOOTT  
 
AOT ref: A53N007-14 Page 9 of 9 Date: 22/07/2014  
© AIRBUS S.A.S. 2014. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT 
 
5. FURTHER INFORMATION 
 
5.1 FOLLOW-UP PLAN 
 
Inspection Service Bulletin (ISB) is planned to be issued to cancel and supersede this AOT.  
 
5.2 IMPACTED DOCUMENTATION 
 
SRM (Ref.1) threshold will be updated accordingly with next revisions. 
Until availability of SRM (Ref.1) update thresholds provided as per #4.1.1 of this AOT should be 
considered in case of new embodiment of SRM repairs per #3. 
 
6. AOT APPROVAL 
 
The technical content of this document is approved under the authority of DOA nr. EASA.21J.031.  
 
7. REPORTING 
 
Questions about this AOT and inspection results with or without findings are to be sent to Airbus  
Customer Services engineering as soon as possible, after the AOT application, to the attention of:  
 
Julien MAZIEUX 
Structure repair engineer 
SRM development – SEOEM 
CUSTOMER SERVICES 
Phone: +33 (0)5 67 19 10 25 
Mailto: srm.StructureRepairSupport@airbus.com  
 
Best Regards, 
 
Jean-Luc MOUYSSET 
VICE PRESIDENT ENGINEERING SUPPORT 
CUSTOMER SERVICES 
Gilles DE-CEVINS 
VICE PRESIDENT A320 PROGRAMME 
CUSTOMER SERVICES

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
