# Airbus Alert Operators Transmission A53P018-25

Copy: No revision named ("AOT A53P018-25"), 20 pages: PDF https://openairdocs.org/files/sha256/8a/56/8a56a18773faa41738ea3ef3fd4f5b6e3025f121f99e5a6b2970edb13664cf8c; text https://openairdocs.org/service-documents/airbus/aot-a53p018-25/file/8a56a18773fa.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2026-3478, the docket of AD 2026-07-11. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Other document (Alert Operators Transmission)
- Number: A53P018-25
- Page: https://openairdocs.org/service-documents/airbus/aot-a53p018-25

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2026-07-11](https://openairdocs.org/ad/2026-07-11.md), effective Apr 29, 2026: No revision named

## Text (20 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2026-3478, the docket of AD 2026-07-11. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Airbus Amber
CUSTOMER SERVICES DIRECTORATE
2 ROND POINT EMILE DEWOITINE
31700 BLAGNAC FRANCE
TELEPHONE + 33 (0)5 61 93 33 33
ALERT OPERATORS TRANSMISSION - AOT
AOT ref: A53P018-25 Rev 00 Page 1 of 20 Date: 24-MAR-2025
C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
SUBJECT: ATA 53 – Inspection of ATA53 Bracket Catcher supporting ATA27 Flap Shaft installation in 
MLG Bay at Fr61
AIRCRAFT TYPE:  A350-1000
OUR REF.: A53P018-25 Rev 00 dated 24-MAR-2025
EFFECTIVITY DATE: 24-March-2025
Export Control - Not technical
1. AIRCRAFT AFFECTED
A350-1000 only.
A/C type Serie MSN
A350 A350-1000
00065, 00071, 00088, 00102, 00110, 00118, 00125, 00141, 00161, 00169, 
00188, 00206, 00215, 00225, 00229, 00233, 00241, 00252, 00258, 00262, 
00266, 00274, 00286, 00290, 00296, 00298, 00306, 00315, 00319, 00326, 
00330, 00332, 00336, 00340, 00342, 00346, 00350, 00356, 00362, 00368, 
00372, 00374, 00380, 00382, 00386, 00388, 00399, 00402, 00409, 00415, 
00420, 00424, 00426, 00430, 00432, 00434, 00438, 00440, 00444, 00446, 
00473, 00482, 00490, 00492, 00495, 00503, 00507, 00509, 00533, 00539, 
00547, 00560, 00563, 00584, 00600, 00605, 00609, 00610, 00617, 00623, 
00628, 00635, 00639, 00647, 00652, 00655, 00662, 00670, 00676, 00683, 
00691, 00702, 00710
2. REFERENCED DOCUMENTATION
2.1 APPENDIX
Appendix 1: AOT inspection instructions flowchart
Appendix 2: AOT repair instruction flowchart
Appendix 3: AOT embodiment reporting sheet
2.2 REFERENCES
Ref. [1]: Maintenance Illustrated Parts Data (MIPD-IF) A350-A-27-54-62-01000-94AA-A ITEM 080B 
CA96779-003 - ATA27 - “Shaft”
Ref. [2]: Maintenance Illustrated Parts Data (MIPD-IF) A350-A-27-54-62-01000-94AA-A ITEM 030 
V2751510220000 - ATA27 - “Catcher”
Ref. [3]: Identification (IDENT) A350-A-53-36-86-02000-94CA-A ITEM 125 V5393528020000 - ATA53 - 
“27-Bracket Equipped” - LH Side
Ref. [4]: Identification (IDENT) A350-A-53-36-86-02000-94CA-A ITEM 115 V5393528020100 - ATA53 - 
“27-Bracket Equipped” - RH Side
Ref. [5]: Maintenance procedure (MP) A350-A-27-54-XX-00002-310A-A - Detailed Inspection of the Flap 
Transmission System
Ref. [6]: Non-Destructive Test (NDT) A350-A-51-99-XX-01001-040A-A - Visual Testing

### Page 2

Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT
AOT ref: A53P018-25 Rev 00 Page 2 of 20 Date: 24-MAR-2025
C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
Ref. [7]: Maintenance procedure (MP) TASK A350-A-27-54-62-00002-520A-A - “Removal of the Flap 
Torque-Shaft Assembly”
Ref. [8]: Aircraft Structural Repair (ASR) ASR A350-A-51-42-21-01001-667A-A - “Fastener Installation 
and Removal - Composite and Hybrid Structures”
Ref. [9]: Non-Destructive Test (NDT) A350-A-51-96-50-00001-353A-A - Rotating Probe Testing - General 
- Procedure A
Ref. [10]: Aircraft Structural Repair (ASR) ASR A350-A-51-99-12-00001-311A-A - “Visual - Remaining 
Corrosion - Metallic Materials”
Ref. [11]: Aircraft Structural Repair (ASR) ASR A350-A-51-72-11-00001-660A-A - “Replacement of 
Structural Components”
Ref. [12]: Maintenance procedure (MP) TASK A350-A-27-54-62-00002-720A-A - “Installation of the Flap 
Torque-Shaft Assembly”
Ref. [13]: Aircraft Structural Repair (ASR) ASR A350-A-51-99-10-00001-311A-A “Visual - Detailed – 
Composites”
Ref. [14]: Maintenance procedure (MP) TASK A350-A-27-51-XX-00ZZZ-270Z-A - “Check of the Flap 
Feedback Position Pick-off Unit (FPPU), the Differential Feedback Position Pick-Off Units (DFPPUs) and 
the Station Position Pick-off Units (SPPUs)”
Ref. [15]: Maintenance procedure (MP SUBTASK) 275462-50000040001 - “Preparation for Test”
Ref. [16]: Maintenance procedure (MP) SUBTASK 275462-50000050001 - “Test(s)”
Ref. [17]: TFU:53.31.00039 - “A350 - Incorrect Flap fairing installation”

### Page 3

Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT
AOT ref: A53P018-25 Rev 00 Page 3 of 20 Date: 24-MAR-2025
C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
3. REASON
3.1 FACTS
During inspection of an A350-1000 in Airbus Final Assembly Line, a clash between ATA27 Flap Shaft F02 
Ref. [1] and related ATA27 Catcher Ref. [2] was found on both A/C sides.
Catcher Ref. [2] and Flap Shaft Ref. [1] are localized in the MLG Bay at Fr61 (See Figure 1 to 4 for affected 
parts location).
Figure 1: A/C location
Figure 2: View A, MLG Bay area (RH Shown - LH symmetrical)
RH shown

### Page 4

Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT
AOT ref: A53P018-25 Rev 00 Page 4 of 20 Date: 24-MAR-2025
C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
Figure 3: View B, clash between ATA27 Shaft & ATA27 Catcher (RH shown - LH symmetrical)
Figure 4: Identified clash (RH shown – LH symmetrical)
ATA53 Bracket
ATA27 
Catcher
ATA27 Shaft
FR61
FWD
ATA27 Shaft
ATA27 Catcher
ATA53 Bracket
Wear
RH shown
RH shown

### Page 5

Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT
AOT ref: A53P018-25 Rev 00 Page 5 of 20 Date: 24-MAR-2025
C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
3.2 HISTORY/BACKGROUND
N/A
3.3 ROOT CAUSE
The root cause of the clash between both ATA27 items is an incorrect installation of the ATA53 Bracket 
Ref. [3] and/or Ref. [4] according to the A/C side on which ATA27 Catcher Ref. [2] is installed.
Investigation outcome has demonstrated a 180° inverted installation of this ATA53 Bracket (see Figure 5 
for wrong ATA53 Bracket installation and Figure 6 for correct ATA53 Bracket installation).
 
Figure 5: Reported 180° inverted ATA53 Bracket installation (RH shown - LH symmetrical)
ATA53 Bracket
ATA27 Shaft
FR61
ATA27 
Catcher
FWD
RH shown

### Page 6

Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT
AOT ref: A53P018-25 Rev 00 Page 6 of 20 Date: 24-MAR-2025
C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
Figure 6: Expected ATA53 Bracket installation as per definition (RH shown - LH symmetrical)
Note: A350-900 is not affected because the ATA53 Bracket presents a different design which does not 
allow such inverted installation.
3.4 INVESTIGATION
The clash between ATA27 Catcher Ref. [2] and Shaft Ref. [1] may lead to a damage of the Shaft. 
3.5 CONSEQUENCES
In case of single failure of the affected Shaft, the complete Flap transmission would be fixed in a fail-
safe position. In that case, the Flap Shaft would be kept in place by the ATA53 Bracket and ATA27 
Catcher avoiding additional damage.
Nevertheless, an additional ATA27 Shaft rupture along the ATA27 Flap transmission could potentially 
result in an inboard Flap surface no longer connected and controlled by the Flap command / monitoring.
FR61
Aircraft Junction 
on Doubler side
Rear Canted BeamATA53 Bracket
ATA27 Catcher
ATA27 Shaft
FWD
RH shown

### Page 7

Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT
AOT ref: A53P018-25 Rev 00 Page 7 of 20 Date: 24-MAR-2025
C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
4. OBJECTIVES OF THIS AOT
The objective of this AOT is to request a one-time inspection of the installation position of the ATA53 
Bracket Ref. [3] and Ref. [4] to confirm their correct installation.
Note:
Performing or having performed the MP task Ref. [5] is an Alternative Means of Compliance (AMOC) to 
the DET inspection as required in §5.4.
5. MAINTENANCE PROCEDURE
NOTE: This AOT is classified mandatory or expected to be classified mandatory by an Airworthiness 
Directive (AD). If the instructions of this AOT are marked as Required for Compliance (RC), the 
operator must follow the instructions as indicated. These instructions are introduced by “in 
accordance with”.
NOTE: The instructions of this AOT include procedures given in other documents or in other sections 
of the AOT. If the instructions of this AOT are NOT marked as Required for Compliance (RC), the 
operator can use an alternative procedure accepted by his/her local authority. These instructions 
are introduced by “refer to”.
NOTE: When this AOT gives the access or close-up instructions with no return to service tests, the 
operator can adapt these instructions to add flexibility to the maintenance operations. The technical 
intent of this AOT must comply with the set parameters.
5.1 PLANNING (RC)
From the AOT effective date and no later than the end of September 2025 (the 30th of September 2025), 
perform the actions in accordance with §5.4 to §5.7.
5.2 MANPOWER
For the Inspection manpower, including access, it is estimated to take 0.2 hour for the whole A/C.
For the Repair manpower, including access, it is estimated to take 12.5 hours for the whole A/C.
5.3 ACCESS
WARNING:
MAKE SURE THAT THE SAFETY DEVICES AND THE WARNING NOTICES ARE IN POSITION 
BEFORE YOU START A TASK ON OR NEAR:
-THE FLIGHT CONTROLS
-THE FLIGHT CONTROL SURFACES
-THE LANDING GEAR AND RELATED DOORS
-THE CARGO DOORS
-OTHER COMPONENTS THAT MOVE.
MOVEMENT OF COMPONENTS CAN KILL OR CAUSE INJURY TO PERSONS AND/OR DAMAGE 
TO EQUIPMENT.
WARNING:
BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL 
MANUFACTURER INSTRUCTIONS AND YOUR LOCAL REGULATIONS.

### Page 8

Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT
AOT ref: A53P018-25 Rev 00 Page 8 of 20 Date: 24-MAR-2025
C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
CAUTION:
MAKE SURE THAT THE MAINTENANCE DEVICES OF THE WING TIP BRAKES ARE IN THE 'O' 
POSITION. THIS PREVENTS THE MOVEMENT OF THE FLAP/SLAT TRANSMISSION SYSTEM 
DURING MAINTENANCE.
CAUTION:
MAKE SURE THAT YOU DO NOT CAUSE DAMAGE TO THE CARBON-FIBER TRANSMISSION 
SHAFTS OF THE FLAPS. CARBON-FIBER COMPONENTS ARE EASILY DAMAGED.
CAUTION:
DO NOT APPLY WEIGHT TO THE TRANSMISSION SHAFTS OF THE FLAPS OR USE THEM AS 
HANDLES. THE TRANSMISSION SHAFTS ARE CARBON-FIBER COMPONENTS AND YOU CAN 
EASILY CAUSE DAMAGE TO THEM.
CAUTION:
MAKE SURE THAT YOU DO NOT CAUSE DAMAGE TO THE SURFACES. THESE COMPONENTS 
ARE MADE OF CARBON FIBER REINFORCED PLASTIC.
A/C configuration for inspections and Repairs:
No specific condition is required, A/C can be either on ground or on jacks with MLG doors opened.
The access platform 3M (10 FT) may be required in the frame of repair embodiment.

### Page 9

Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT
AOT ref: A53P018-25 Rev 00 Page 9 of 20 Date: 24-MAR-2025
C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
5.4 INSPECTION (RC)
A. Preparation of the Inspection Area
(1) If necessary, use a FLASHLIGHT and get access to the Main Landing Gear Bay at Fr61.
B. Inspection Procedure
On both LH and RH sides:
(1) Do a Detailed Inspection (DET), in accordance with Ref. [6] to ensure the correct installation 
of ATA53 Bracket Ref. [3] & Ref. [4] (see Figure 6).
(2) If both ATA53 Bracket Ref. [3] and Ref. [4] are installed in accordance with assembly drawing 
installation (see Table 1), send inspection report (APPENDIX 3: AOT embodiment reporting sheet).
No further action.
(3) If ATA53 Bracket Ref. [3] and/or Ref. [4] is/are not installed in accordance with assembly drawing 
installation (see Table 1), go to §5.5 & §5.6.
Notes:
Performing or having performed the MP task Ref. [5] is an Alternative Means of Compliance (AMOC) to 
the DET inspection as required in §5.4 B (1). 
If nil finding is reported in the frame of MP task Ref. [5], send inspection report (APPENDIX 3: AOT 
embodiment reporting sheet) and no further action is required.
If finding is reported in the frame of MP task Ref. [5] and this finding is consistent with the one mentioned 
in §5.5, follow the instructions defined in accordance with §5.6.

### Page 10

Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT
AOT ref: A53P018-25 Rev 00 Page 10 of 20 Date: 24-MAR-2025
C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
5.5 FINDINGS (RC) 
Correct installation
(RH shown - LH symmetrical)
Incorrect installation
(RH shown - LH symmetrical)
It is considered a finding, when the ATA53 Bracket (Ref. [3] and/or Ref. [4]) is/are incorrectly 
installed i.e. when the ATA53 Bracket flange is installed in the FWD direction. 
FWD
FWD
ATA53
Bracket flange 
oriented in 
FWD direction
ATA53 
Bracket flange 
oriented in 
AFT direction

### Page 11

Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT
AOT ref: A53P018-25 Rev 00 Page 11 of 20 Date: 24-MAR-2025
C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
5.6 INSTRUCTIONS (RC)
WARNING:
MAKE SURE THAT THE SAFETY DEVICES AND THE WARNING NOTICES ARE IN POSITION 
BEFORE YOU START A TASK ON OR NEAR:
-THE FLIGHT CONTROLS
-THE FLIGHT CONTROL SURFACES
-THE LANDING GEAR AND RELATED DOORS
-THE CARGO DOORS
-OTHER COMPONENTS THAT MOVE.
MOVEMENT OF COMPONENTS CAN KILL OR CAUSE INJURY TO PERSONS AND/OR DAMAGE 
TO EQUIPMENT.
WARNING:
BE CAREFUL WHEN YOU USE CONSUMABLE MATERIALS. OBEY THE MATERIAL 
MANUFACTURER INSTRUCTIONS AND YOUR LOCAL REGULATIONS.
CAUTION:
MAKE SURE THAT THE MAINTENANCE DEVICES OF THE WING TIP BRAKES ARE IN THE 'O' 
POSITION. THIS PREVENTS THE MOVEMENT OF THE FLAP/SLAT TRANSMISSION SYSTEM 
DURING MAINTENANCE.
CAUTION:
MAKE SURE THAT YOU DO NOT CAUSE DAMAGE TO THE CARBON-FIBER TRANSMISSION 
SHAFTS OF THE FLAPS. CARBON-FIBER COMPONENTS ARE EASILY DAMAGED.
CAUTION:
DO NOT APPLY WEIGHT TO THE TRANSMISSION SHAFTS OF THE FLAPS OR USE THEM AS 
HANDLES. THE TRANSMISSION SHAFTS ARE CARBON-FIBER COMPONENTS AND YOU CAN 
EASILY CAUSE DAMAGE TO THEM.
CAUTION:
MAKE SURE THAT YOU DO NOT CAUSE DAMAGE TO THE SURFACES. THESE COMPONENTS 
ARE MADE OF CARBON FIBER REINFORCED PLASTIC.

### Page 12

Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT
AOT ref: A53P018-25 Rev 00 Page 12 of 20 Date: 24-MAR-2025
C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
If finding (ATA53 Bracket found with its flange in the FWD direction) reported during inspection in §5.4 B, 
do the below steps.
Per affected aircraft side:
(1) Remove and discard affected ATA27 Catcher Ref. [2] and ATA27 Shaft F02 FIN 5004CV Ref. [1] (LH 
side) and/or ATA27 Catcher Ref. [2] and ATA27 Shaft F02 FIN 5104CV Ref. [1] (RH side) in accordance 
with Ref. [7]. 
(2) Remove and discard fasteners at junction between ATA53 Bracket and aircraft structure in 
accordance with Ref. [8]. Affected fasteners are represented by the blue circles in the Figure 7.
Figure 7: ATA53 Bracket fastener removal and hole inspection (RH shown - LH symmetrical)
WARNING:  This picture is taken from an ATA53 BRACKET WELL ORIENTED.
Remark: Figure 7 presents fasteners description to be removed. 
 Fasteners in dotted circles or squares correspond to fasteners not visible on the Figure 7.
Disassemble ATA53 Bracket Ref. [3] and/or Ref. [4] from aircraft junction.
(3) Do a Detailed Inspection of the ATA53 Bracket Ref. [3] and/or Ref. [4] with reference to Ref. [10] to 
make sure there is no scratch and no wear mark.

### Page 13

Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT
AOT ref: A53P018-25 Rev 00 Page 13 of 20 Date: 24-MAR-2025
C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
(4) Do a Detailed Inspection of the open holes at the aircraft junction with ATA53 Bracket Ref. [3] and/or 
Ref. [4] with reference to Ref. [10] and Ref. [13], to make sure there is no scratch and no wear mark. 
Those holes are mentioned in Figure 8 & 9.
Figure 8: Holes to check the tolerance in the aircraft junction “Doubler” (RH shown - LH symmetrical)
                           
Figure 9: Holes to check the tolerance in the aircraft junction “Canted Beam”
(RH shown - LH symmetrical)
(5) On all fasteners holes of the aircraft junction:
Do a rototest inspection in accordance with Ref. [9] in metallic parts only.
Do a dimensional check of the open holes to ensure that diameters are still within the original tolerances 
in accordance with Figure 8 & 9. Production tolerances are: Ø 11.105 – Ø11.160mm.
On ATA53 Bracket Ref. [3] and/or Ref. [4]:
Do a rototest inspection in accordance with Ref. [9] in each fastener hole and do a dimensional check to 
confirm that hole dimension remains within the definition tolerances in accordance with Figure 7 & 10.
Interface between ATA53 Bracket and aircraft junction production tolerances are: 
Ø 11.3 – Ø11.4mm
Interface between ATA53 Bracket and ATA27 Catcher production tolerances are: 
Ø 5.0 – Ø5.1mm
FWD
RH shown
Tolerance to be checked in aircraft 
junction on Doubler side
Tolerance to be checked in 
aircraft junction on Rear Canted 
Beam side
RH shown RH shown
FWD FWD

### Page 14

Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT
AOT ref: A53P018-25 Rev 00 Page 14 of 20 Date: 24-MAR-2025
C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
Figure 10: Holes tolerances on ATA53 Bracket
(6) If findings during steps (3) to (5), contact Airbus with a damage report and send the Appendix 3: AOT 
embodiment reporting Sheet.
(7) If nil finding, re-install the removed ATA53 Bracket Ref. [3] and/or Ref. [4] in accordance with assembly 
installation drawing (Table 1) and Ref. [11].
(8) Install new ATA27 Shaft F02 FIN 5004CV Ref. [1] and new ATA27 Catcher Ref. [2] (LH side) and/or 
new ATA27 Shaft F02 FIN 5104CV Ref. [1] and new ATA27 Catcher Ref. [2] (RH side) in accordance with 
Ref. [12] from the beginning to the very end with the following deviation:
- Disregard MP TASK Ref. [14] highlighted in the frame of MP SUBTASK Ref. [15] bullet point (4) (d) & 
MP SUBTASK Ref. [16] bullet point (1) requiring to make sure that the transmission system at Flap support 
1/2/3/4 are in the zero position.
- Consider the following instead:
- If the difference of the value(s) is (are) not in the limit:
Disconnect the Flap Torque-Shaft assembly (42) from universal joint (53) at the T-bevel gearbox (52) level 
in accordance with AMM TASK Ref. [7] and carefully turn the universal joint (53) by hand until the current 
SPPU value is the same as the one previously recorded (A1 & A2) before Flap Torque-Shaft assembly 
F02 removal plus or minus 0.05 degree.
Reconnect the Flap Torque-Shaft assembly (42) to the universal joint (53) at the T-bevel gearbox (52) 
level in accordance with AMM TASK Ref. [12].
(9) Close accesses.
(10) Send inspection report (Appendix 3: AOT embodiment reporting sheet).
(11) No further action.

### Page 15 (OCR)

Airbus Amber
AIRBUS
ALERT OPERATORS TRANSMISSION - AOT
Assembly Drawing Installation
V53314139004 / V53314139005
V53314139000 / V53314139001
V53314139002 / V53314139003
V53314114000 / V53314114001
V53314114002 / V53314114003
V53314114004 / V53314114005
V53314114008 / V53314114009
(*) EFFECTIVITY TABLE
MSN
00584, 00605, 00609, 00610, 00617, 00623, 00628, 00635, 00639,
00662, 00670, 00676, 00683, 00691, 00702, 00710
00342, 00346, 00350, 00356, 00362, 00368, 00372, 00374, 00380
00382, 00386, 00388, 00399, 00402, 00409, 00415, 00420, 00424
00426, 00430, 00432, 00434, 00438, 00440, 00444, 00446, 00473
00482, 00490, 00492, 00495, 00533, 00539, 00547, 00600, 00647,
00652, 00655
00503, 00507, 00509, 00560, 00563
00065, 00071, 00088, 00102, 00110, 00118, 00125, 00141, 00161
00169, 00188, 00206, 0022:
00215, 00229, 00233, 00241
00252, 00258
00262, 00266, 00274, 00286, 00290, 00296, 00298, 00306, 00315,
00319, 00326, 00330, 00332, 00336, 00340
Table 1: ATA53 Bracket installation drawing reference on A/C structure.
AOT ref: A53P018-25 Rev 00  Page 15 of 20  Date: 24-MAR-2025
C80_AOT_FM1104649_v9.0  © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT

### Page 16

Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT
AOT ref: A53P018-25 Rev 00 Page 16 of 20 Date: 24-MAR-2025
C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
5.7 SPARES AND TOOLING
This AOT is the subject of an AIRBUS monitored retrofit campaign. Before performing AOT inspection,
Airbus recommends for each operator to refer to Retrofit Information Letter (RIL) ref. V53M25000282
instructions for material ordering.
In the frame of the AOT inspection below part and quantities are needed per A/C side:
A/ For inspection:
No spare part is required.
B/ In case of ATA53 Bracket(s) not installed as per definition dossier, the below parts will have to be 
ordered: 
Per A/C side:
Fasteners between ATA53 Bracket and aircraft junction:
o1EA EN6115B7-18
o2EA EN6115B7-20
o1EA EN6115B7-22
o4EA ABS1826K7
Fasteners between ATA53 Bracket and ATA27 Catcher:
o4EA ABS0114V3-4
o4EA NAS1149E0332P
Catcher ATA27 P/N V2751510220000
Shaft ATA27 P/N CA96779-003
Moog supplier will have to be contacted directly for shaft ordering.
NOTE: For the organization of this retrofit, you are kindly requested to contact AIRBUS retrofit
management department: monitored.retrofit@airbus.com.

### Page 17

Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT
AOT ref: A53P018-25 Rev 00 Page 17 of 20 Date: 24-MAR-2025
C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
6. ADDITIONAL INFORMATION
6.1 FOLLOW-UP PLAN
It is anticipated that this AOT will be mandated by issuance of an EASA Airworthiness Directive (AD).
TFU:53.31.00039 Ref. [17] will provide latest status of the inspection and associated additional in-
service actions if any.
6.2 IMPACTED DOCUMENTATION
N/A
7. AOT APPROVAL
The technical content of this document is approved under the authority of the DOA ref. EASA.21J.031.
8. REPORTING
Address your inspection results (with or without findings) to Airbus Customer Services through the 
generic e-mail address: inspection.results@airbus.com. Refer to the latest reporting policy (Ref in the OIT 
999.0018/16). 
Give the AOT reference in the mail title, as follows: A53P018-25 Inspection Result.
You can address your questions about this AOT to Airbus Customer Services through TechRequest 
on Airbus World, selecting Maintenance & Engineering Domain, Engineering Support and ATA 53-31 
/Topic A53-018-25.
Best Regards,
Ahmed CHABBOUH
SENIOR DIRECTOR IN-SERVICE
ENGINEERING
CUSTOMER CARE CENTER
Mathieu DUMAS 
HEAD OF WIDE BODY PROGRAMME
SUPPORT
CUSTOMER SERVICES

### Page 18 (OCR)

Airbus Amber
AIRBUS
ALERT OPERATORS TRANSMISSION - AOT
Appendix 1:
Inspection Instruction Flowchart
Per A/C side, Do the DET inspection of AТA53 Bracket installation
as detailed in §5.4
ATA53 Bracket is  installed in  YES
accordance with
definition dossier?
ATA53 Bracket is in the correct position
NO
Send inspection report to Airbus
Refer to Repair Flowchart  No further action
AOT ref: A53P018-25 Rev 00  Page 18 of 20  Date: 24-MAR-2025
C80_AOT_FM1104649_v9.0  © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT

### Page 19 (OCR)

Airbus Amber
AIRBUS
ALERT OPERATORS TRANSMISSION - AOT
Appendix 2:
Repair Instruction Flow Chart
Finding reported in accordance with inspection flowchart
Open accesses and remove ATA27 Catcher & disconnect ATA27 Shaft
Remove & discard fasteners from ATA53 Bracket & disassemble ATA53 Bracket from Aircraft Junction
Do Visual inspection of the open holes (in stacking Aircraft Junction & ATA53 Bracket),
to make sure there is no scratch nor wear mark.
Do Rototest inspection on all fasteners holes (4 external Aircraft Junction holes & 4 Rear Canted Beam
holes) & in 8 open holes of ATA53 Bracket.
Do a dimensional check of the open holes to ensure that diameter is still within the original tolerances.
YES
Findings
NO
Re-install the removal ATA53 Bracket
Connect the new ATA27 Shaft & install new ATA27 Catcher & test / check the slats / flaps
Close accesses
Send inspection report to Airbus
No further action  Contact Airbus for further instructions before next flight
AOT ref: A53P018-25 Rev 00  Page 19 of 20  Date: 24-MAR-2025
C80_AOT_FM1104649_v9.0  © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT

### Page 20

Airbus Amber
ALERT OPERATORS TRANSMISSION - AOT
AOT ref: A53P018-25 Rev 00 Page 20 of 20 Date: 24-MAR-2025
C80_AOT_FM1104649_v9.0 © AIRBUS S.A.S. 2025. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
Appendix 3: AOT Reporting embodiment Sheet
A/C INFORMATION:
OPERATOR:
A/C MSN:
A/C REGISTRATION:
FLIGHT CYCLES:
FLIGHT HOURS:
DATE OF INSPECTION:
Inspection results
Finding
(Yes / No) Damage type
ATA53 Bracket LHS
ATA53 Bracket RHS
COMMENTS (free text):

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
