# Airbus All Operators Transmission A57N012-19

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 01 ("AOT A57N012-19 Rev01"), 9 pages: PDF https://openairdocs.org/files/sha256/2a/77/2a774e8a23d6b500413ccd3b7cddb20e80a64760c07e2871bf2e5643107bbfd3; text https://openairdocs.org/service-documents/airbus/aot-a57n012-19/file/2a774e8a23d6.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2019-0982, the docket of AD 2020-05-16. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 01 ("AOT-A57N012-19 R01"), 9 pages: PDF https://openairdocs.org/files/sha256/86/46/8646294896dd636117895e7b2a38109da5e9ddc7cf477818a6a77e1dc41bc073; text https://openairdocs.org/service-documents/airbus/aot-a57n012-19/file/8646294896dd.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2023-0009, the docket of AD 2024-06-07. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Other document (All Operators Transmission)
- Number: A57N012-19
- Latest revision known: A57N012-19, Revision 01, dated April 18, 2019 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus/aot-a57n012-19

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2024-06-07](https://openairdocs.org/ad/2024-06-07.md), effective May 22, 2024: Revision 01

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/aot-a57n012-19/proposed.md).

## Text (9 pages)

Revision 01, the newest copy. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2019-0982, the docket of AD 2020-05-16. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

CUSTOMER SERVICES DIRECTORATE
2 ROND POINT EMILE DEWOITINE
31700 BLAGNAC FRANCE
TELEPHONE + 33 (0)5 61 93 33 33
ALERT OPERATORS TRANSMISSION - AOT
AOT ref: A57N012-19 Rev 01 Page 1 of 9 Date: 18-APR-2019
© AIRBUS S.A.S. 2019. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
SUBJECT: ATA 57 – OVERWING PANEL INSTALLATION INSPECTION
AIRCRAFT TYPE: A319,A320,A321
OUR REF.: A57N012-19 Rev 01 dated 18-APR-2019
OUR PREVIOUS REF.: A57N012-19 Rev 00 dated 20-MAR-2019
0. REASON FOR REVISION
Paragraph “1. AIRCRAFT AFFECTED” updated to add the following MSNs into AOT applicability:
8026, 8028, 8031-8032, 8034, 8040-8041, 8044-8045, 8049, 8054, 8057, 8061-8062, 8065, 8069, 8071, 
8075-8076, 8082-8083, 8103.
Paragraph “3.1 FACTS” updated content to remove reference to aircraft delivery date. This information 
is superseded by the updated paragraph 1. AIRCRAFT AFFECTED.
“BEG REV 01”
1. AIRCRAFT AFFECTED
7181, 7530, 7544, 7548, 7598, 7610, 7634, 7669, 7757, 7811, 7849, 7851, 7853, 7858, 7862, 7871, 
7875, 7895, 7918, 7920, 7934, 7936, 7941, 7945, 7952, 7963-7964, 7968, 7977, 7980, 7986-7987, 
7992, 7995-7996, 8000, 8008, 8014-8017, 8023, 8026-8029, 8031-8032, 8034, 8036, 8038-8047,8049-
8058, 8060-8063, 8065, 8067-8069, 8071-8090, 8092-8139, 8141-8171, 8173-8221, 8223-8256, 8258-
8270, 8272-8276, 8278-8288, 8290-8378, 8380-8420, 8422-8438, 8440-8444, 8446-8468, 8470-8482, 
8484-8494, 8496-8500, 8502-8507, 8509-8530, 8532-8546, 8548-8582, 8584-8586, 8589-8592, 8594-
8595, 8598-8601, 8604-8609, 8611, 8613-8617, 8619-8628, 8630, 8632, 8634, 8636, 8639-8643, 8646, 
8648, 8650, 8652, 8654, 8656-8659, 8661-8665, 8667-8673, 8675-8677, 8679-8682, 8684-8690, 8692, 
8694-8695, 8700, 8702, 8705, 8717, 8726. 
“END REV 01”
2. REFERENCED DOCUMENTATION
2.1 APPENDIX
Appendix 1: Inspection Flowchart
Appendix 2: Reporting Form
2.2 REFERENCES
01. AMM TASK 32-12-00-010-001-A - Open the Main Gear Doors for Access
02. AMM TASK 57-51-42-400-002-A - Installation of the Overwing Panel
03. Overwing Panel installation drawings D57557048 (effective all A319/A320 models) and 
D57557049 (effective all A321 models)

### Page 2

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A57N012-19 Rev 01 Page 2 of 9 Date: 18-APR-2019
© AIRBUS S.A.S. 2019. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
Overwing Panel installation drawings D57557048 and D57557049 are attached to this AOT.
3. REASON
3.1 FACTS
During aircraft inspections before delivery, a discrepancy was detected in Overwing Panel (OWP) 
installation. At one OWP installation point (out of seven total attaching points), the attaching bolt was not 
correctly installed (the nut was missing). This triggered production line inspections resulting in three 
additional findings.
“BEG REV 01”
Investigations revealed a discrepancy in production work orders following an OWP installation industrial 
change. This change concerns only two out of the seven OWP attaching points, identified as point A and 
point B in Figure 1.
“END REV 01”
3.2 CONSEQUENCES
Missing or incorrect bolt installation into point A and/or point B lugs could lead to localized stress 
increase into the OWP areas surrounding the affected attaching point and into the attaching strap. It has 
been demonstrated that there is no risk of PDA resulting from this installation discrepancy, however a 
consequential reduction of OWP structural damage tolerance capability is identified.
3.3 AIM
The aim of this AOT is to provide instructions for OWP inspection and to confirm its correct installation. 
In case of findings, corrective actions (hardware installation or OWP repair) and additional inspections 
for consequential damage are required.
4. SHORT TERM ACTION
4.1 PLANNING AND MANPOWER
4.1.1 ACCOMPLISHMENT TIMESCALE
The inspections detailed in this document paragraph 4.2 are to be accomplished no later than 6 
months after AOT issuance.
The inspections detailed in this AOT will be subject to an Airworthiness Directive (AD) published by 
the European Aviation Safety Agency (EASA).
4.1.2 MANPOWER
Estimated time to perform the inspection is 0.1 Hrs per Wing.
In case of finding (missing bolt, nut, washer or cotter pin), corrective actions will require additional 0.5 
Hrs per Wing.

### Page 3

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A57N012-19 Rev 01 Page 3 of 9 Date: 18-APR-2019
© AIRBUS S.A.S. 2019. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
FIGURE 1 – ATTACHING POINTS A & B
FIGURE 2 – ATTACHING POINT A                                                   FIGURE 3 – ATTACHING POINT B
Washer
Nut
Pin cotter
Bush
ATTACHING POINT “B”
ATTACHING POINT “A”
Section K3-K3
Washer
Nut
Cotter PinSection G3-G3
Washer
Nut
Cotter Pin
Bolt Bolt

### Page 4

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A57N012-19 Rev 01 Page 4 of 9 Date: 18-APR-2019
© AIRBUS S.A.S. 2019. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
4.2 DESCRIPTION
4.2.1 ACCESS
MLG doors opening as per Ref 01.
4.2.1.1 SAFETY PRECAUTIONS
Refer to standard safety procedures when accessing the MLG bay and on upper wing surface.
4.2.2 INSPECTION REQUIREMENTS
From inside the MLG bay, look upward and inspect the following OWP fitting lugs:
- Forward outboard lug (Rib 4, most forward lug out of three), identified as point A in Figure 1.
- Rear Spar lug (Rib 1, attaching OWP to Wing Rear Spar), identified as point B in Figure 1.
Confirm that attaching hardware is correctly installed (bolt, nut, washer, cotter pin) as per Ref 02 on both 
sides LH and RH (refer also to Figures 2 and 3) and send the Reporting Form to AIRBUS.
In case of findings, refer to chapter 4.2.3.
4.2.3 FINDINGS
1) In the case only the cotter pin is missing, but the bolt, washer, and nut are installed:
a) Check that the installation is in accordance with Ref 02 (check torque value) and re-install 
missing parts before next flight.
b) Send Reporting Form to AIRBUS.
2) In case of a missing bolt or nut, perform a DET inspection to detect any distortion or missing 
part:
a) On the OWP lower surface in the area of 300 mm radius around concerned fitting (refer to 
Figure 4);
b) On the OWP upper surface, inspect the attaching strap installed on the leading edge and 
outboard side of OWP (refer to Figure 5);
c) In case of NIL findings, complete installation in accordance with Ref 02 before the next 
flight, and go to step “e”.
d) In case of findings, assess the damage and perform a repair in accordance with the SRM or 
send a damage report to AIRBUS before next flight for further instructions.
e) Send Reporting Form to AIRBUS

### Page 5

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A57N012-19 Rev 01 Page 5 of 9 Date: 18-APR-2019
© AIRBUS S.A.S. 2019. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
FIGURE 4 – INSPECTION AREA – OWP LOWER SURFACE
FIGURE 5 – INSPECTION AREA – OWP UPPER SURFACE
R 300 mm
R 300 mm
STRAP INSPECTION

### Page 6

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A57N012-19 Rev 01 Page 6 of 9 Date: 18-APR-2019
© AIRBUS S.A.S. 2019. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
4.3 SPARES AND TOOLING
Refer to Ref 03 for applicable P/Ns.
For your information, the following parts have been identified as composing the installation 
assembly:
Part Number Description Total Quantity 
per a/c
Alternative 
P/N
Local 
manufacturing 
authorized
Attaching 
point location
NAS1149D0516K Washer 2 N/A NO A
NSA5060-5 Nut 2 N/A NO A
NAS6605D16 Bolt 2 N/A NO A
D5754082420200 Washer 2 N/A YES B
NSA5060-4 Nut 2 N/A NO B
NAS6604D25 Bolt 2 N/A NO B
MS24665-153 Pin cotter 4 N/A NO A & B
No special tooling is required to complete the inspection or hardware installation.
5. FURTHER INFORMATION
5.1 FOLLOW-UP PLAN
After completion of this AOT it is essential that all the inspections results are reported to AIRBUS 
using the Reporting Form in Appendix 2. AIRBUS will consider the delivery of the inspection results 
as AOT terminative action.
5.2 IMPACTED DOCUMENTATION
None.
6. AOT APPROVAL
The technical content of this document is approved under the authority of DOA nr. EASA.21J.031.
7. REPORTING
Questions about this AOT are to be addressed to Airbus Customer Services through TechRequest on 
Airbus World, selecting Engineering Domain, Section Engineering Support and ATA 57-50.
As per latest reporting policy (Ref to OIT 999.0018/16), inspection results (with or without findings) are to 
be addressed to Airbus Customer Services through the generic e-mail address:  
inspection.results@airbus.com.

### Page 7

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A57N012-19 Rev 01 Page 7 of 9 Date: 18-APR-2019
© AIRBUS S.A.S. 2019. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
Best Regards,
Christian FREMONT
VICE PRESIDENT ENGINEERING SUPPORT
CUSTOMER SERVICES
Jean-Pierre GOMEZ
VICE PRESIDENT A320 FAMILY PROGRAMME
CUSTOMER SERVICES

### Page 8

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A57N012-19 Rev 01 Page 8 of 9 Date: 18-APR-2019
© AIRBUS S.A.S. 2019. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
APPENDIX 1 – INSPECTION FLOWCHART
Perform DET inspection of both attaching 
points A and B shown in Figure 1 to 
confirm correct installation (bolt, washer, 
nut, cotter pin)
NO FURTHER 
ACTION REQUIRED, 
REPORT TO AIRBUS
Repair iaw SRM or submit 
damage assessment to 
AIRBUS
Are both attaching points 
correctly installed?
YES
NO
YES
Enter into LH/RH MLG bay
Is there any damage 
in the area?
NO
NO
Is only the pin cotter 
missing?
Restore installation as 
per Ref 02
Perform DET to check for signs of 
damage as per paragraph 4.2.3
YES
Restore installation as 
per Ref 02

### Page 9

ALERT OPERATORS TRANSMISSION - AOT 
AOT ref: A57N012-19 Rev 01 Page 9 of 9 Date: 18-APR-2019
© AIRBUS S.A.S. 2019. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT
APPENDIX 2 – Reporting Form
A/C INFORMATION:
OPERATOR:
A/C MSN:
A/C REGISTRATION:
FLIGHT CYCLES:
FLIGHT HOURS:
DATE OF INSPECTION:
For the concerned MSN:
-If the attaching point is correctly installed: quote NIL findings.
-If any attaching element is missing, report finding and corrective action.
INSPECTION 
LOCATION INSPECTION RESULT
LH OWP
Point A
LH OWP
Point B
RH OWP
Point A
RH OWP
Point B

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
