# Airbus All Operators Transmission A57W009-16

Copy: Revision 01 ("FAA-2016-9055_ATO A57W009-16, Rev 01 with Appendices"), 6 pages: PDF https://openairdocs.org/files/sha256/5e/ad/5eadeac2a7551b4a0465f1c9c36ed7417fa3de04dd643eb5c9a2b9d47406c381; text https://openairdocs.org/service-documents/airbus/aot-a57w009-16/file/5eadeac2a755.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2016-9055; AD 2017-15-17 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Other document (All Operators Transmission)
- Number: A57W009-16
- Latest revision known: A57W009-16, Revision 01, dated July 13, 2016 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus/aot-a57w009-16

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2017-15-17](https://openairdocs.org/ad/2017-15-17.md), effective Sep 5, 2017: Revision 01

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/airbus/aot-a57w009-16/proposed.md).

## Text (6 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2016-9055; AD 2017-15-17 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

CUSTOMER SERVICES DIRECTORATE  AIRBUS
1 ROND POINT MAURICE BELLONTE
31707 BLAGNAC CEDEX FRANCE
TELEPHONE + 33 (0)5 61 93 33 33
ALERT OPERATORS TRANSMISSION - AOT
SUBJECT: ATA 57 - WINGS - CENTER WINGS - INSPECTION OF FRAME 40 LOWER OUTBOARD
RADIUS FOR CRACKS
AIRCRAFT TYPE: A300-600
OUR REF.: A57W009-16 Rev 01 dated 13-JUL-2016.
0. REASON FOR REVISION
The purpose of this revision is to extend the inspection area. Indeed, the adjacent fastener hole, not
inspected as per revision 00, was found cracked while accomplishing this AOT.
The revised paragraphs are indicated between **BEG. REV** and **END REV**.
1. AIRCRAFT AFFECTED
All A300-600 aircraft post MOD/MP 10221/S20394 (MSN 726 and subsequent)
2. REFERENCED DOCUMENTATION
2.1 APPENDIX
**BEG. REV**
Appendix 1: Extended inspection area
**END REV**
Appendix 2: Flowchart
2.2 REFERENCES
SB 57-0261 rev00
AMM 24-00-00
AMM 32-12-11
AMM 06-41-57
AMM 57-41-41
NTM 51-10-08
3. REASON
3.1 FACTS
A full stress analysis of the FR40 lower area, supported by a detailed Finite Element Model, of the
configuration A300-600 post-mod 10221 was recently completed. This analysis demonstrated for the
FR40 forward fitting lower radius:
- a low fatigue and propagation threshold
a high probability to detect cracks on aircraft having accumulated more than 19000FC/41000FH
In addition, on A300-B2 aircraft, which have a similar design, cracks were reported on the Full Scale
Fatigue Test and on in-service aircraft. These aircraft are currently inspected through SB 57-0261 rev00.
Therefore, all A300-600 aircraft post MOD/MP 10221/S20394, close to or beyond 19000FC/41000FH,
must be inspected in a short-time frame.
AOT ref: A57W009-16 Rev 01  Page 1 of 3  Date: 13-JUL-2016
© AIRBUS S.A.S. 2016. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT

### Page 2 (OCR)

AIRBUS
ALERT OPERATORS TRANSMISSION - AOT
3.2 CONSEQUENCES
A non-detected crack in this area could have an impact on the structural integrity of the FR40 forward
fitting.
3.3 AIM
The aim of this AOT is to call for a one-time High Frequency Eddy Current (HFEC) inspection of the
FR40 forward fitting on A300-600 aircraft post MOD/MP 10221/S20394 (MSN 726 and subsequent).
4. SHORT TERM ACTION
4.1 PLANNING AND MANPOWER
4.1.1 ACCOMPLISHMENT TIMESCALE
**BEG. REV**
The one-time HFEC inspection described in paragraph 4.2.2 must be performed as follows:
- Not later than 19000FC/41000FH whichever occurs first (WOF), for aircraft with less or equal to
18700FC/40300FH at AOT issuance date,
- Within 300FC/630FH WOF from AOT issuance date, for aircraft with more than 18700FC/40300FH
at AOT issuance date.
For aircraft already inspected as per revision 00 of this AOT, a one-time additional HFEC inspection,
described in paragraph 4.2.2, must be performed within 300FC/630FH WOF from AOT revision 00
accomplishment date (see appendix 1 for extended inspection area).
**END REV**
4.1.2 MANPOWER
The manpower estimates given in this AOT are based on the direct labor cost to do the work. These
estimates assume that the work will be done by experienced personnel, and may need to be revised
upwards to suit operator's circumstances. The estimates do not include the time to prepare, plan or
inspect the work. Manufacturing and procurement of parts and tools, drying times for paints, sealants,
etc., and general administration work are also not included.
The estimated time for access is 2MH.
**BEG. REV**
The estimated time to perform this extended inspection is 2MH
**END REV**
The estimated time for close-up is 2.5MH.
4.2 DESCRIPTION
4.2.1  ACCESS
Make sure that the aircraft is electrically grounded, refer to AMM 24-00-00, Page Block 301.
Put access platforms in position at zones 510 and 610.
- Open main landing gear doors, refer to AMM 32-12-11, Page Block 301.
Open wing access doors 512AB, 512BB, 513AB, 612AB, 612BB, 613AB, refer to AMM 06-41-57,
Page Block 001 and AMM 57-41-41, Page Block 401.
AOT ref: A57W009-16 Rev 01  Page 2 of 3  Date: 13-JUL-2016
© AIRBUS S.A.S. 2016. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT

### Page 3 (OCR)

AIRBUS
ALERT OPERATORS TRANSMISSION - AOT
4.2.2 INSPECTION REQUIREMENTS
Refer to appendix 2 for inspection instructions.
4.2.3 JOB CLOSE UP
Make sure that the work areas are clean and clear of tools and other items of equipment.
Close wing access doors 512AB, 512BB, 513AB, 612AB, 612BB, 613AB, refer to AMM 06-41-57,
Page Block 001 and AMM 57-41-41, Page Block 401.
Close main landing gear doors, refer to AMM 32-12-11, Page Block 301.
Remove the access platform(s).
Restore the systems and the aircraft to normal operating condition.
4.2.4 FINDINGS
In case of findings, before next flight, please contact Airbus Customer Services Repair Teams
SEOE1/SEOE2/SEOE3/SEOE4 through TechRequest on Airbus World, selecting Repair Domain to
get further instructions.
4.3 SPARES AND TOOLING
Not applicable
5. FURTHER INFORMATION
5.1 FOLLOW-UP PLAN
**BEG. REV**
This AOT will be cancelled and superseded by a new Inspection Service Bulletin, which will be available
by Q1 2017.
**END REV**
5.2 IMPACTED DOCUMENTATION
Not applicable
6. AOT APPROVAL
The technical content of this document is approved under the authority of DOA nr. EASA.21J.031.
It is anticipated that this AOT will be rendered mandatory.
7. REPORTING
Questions about this AOT and inspection results with or without findings are to be addressed to Airbus
Customer Services through TechRequest on Airbus World, selecting Engineering Domain and ATA
57-10.
Best Regards,
Jean-Luc MOUY SSET  Olivier CRIOU
VICE PRESIDENT ENGINEERING SUPPORT  HEAD OF A300/A310 PROGRAMME & CHIEF
CUSTOMER SERVICES  ENGINEER
CUSTOMER SERVICES
AOT ref: A57W009-16 Rev 01  Page 3 of 3  Date: 13-JUL-2016
• AIRBUS S.A.S. 2016. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT

### Page 4 (OCR)

Z140
FR47
RIB1 DATUM
FR40
FRONT SPAR DATUM
c
RH SHOWN
LH SYMMETRICAL
AOT A57W009-16 Rev 01 - Appendix 1

### Page 5 (OCR)

AOT A57W009-16 Rev 01 - Appendix 1
Extended  Inspection area

### Page 6 (OCR)

Do a HFEC inspection of the FR40 forward fitting
outboard radius area
As per NTM 51-10-08, LH/RH sides
YES
Crack?  Contact Airbus before next
flight
NO
No further action in the frame of
this AOT
AOT A57W009-16 Rev 01 - Appendix 2

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
