# Airbus Alert Service Bulletin 05-00-90

Copy: Revision 5 ("Airbus Emergency ASB 05-00-90 and -76 and -66 and -56 Rev 5 (the ASB)"), 18 pages: PDF https://openairdocs.org/files/sha256/85/d4/85d417bef6f061799b977fd46d370a696e0e3f4ce5b33ca62d223ea9fe3a3bc4; text https://openairdocs.org/service-documents/airbus/sb-05-00-90/file/85d417bef6f0.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2025-1735, the docket of AD 2025-24-04. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: 05-00-90
- Latest revision known: 05-00-90, Revision 5 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus/sb-05-00-90

## Text (18 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2025-1735, the docket of AD 2025-24-04. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

AIRBUS  HELICOPTERS
EMERGENCY
ALERT SERVICE BULLETIN
PROTECTIVE MEASURE
TIME LIMITS - MAINTENANCE CHECKS - Upper fin
Inspection of the spar and attachment screws of the upper fin
ATA: 55
For the attention of
HELICOPTER  Version(s)
NUMBER
CONCERNED  Civil  Military
AS350  05.00.90  ВЗ
AS355  05.00.76  E, F, F1, F2, N, NP
AS550  05.00.66  СЗ
AS555  05.00.56  AF, AN, AP, SN, UF, UN
Revision No.  Date of issue
Revision 0  2017-06-27
Revision 1  2020-07-22
Revision 2  2021-03-04
Revision 3  2023-04-06
Revision 4  2023-05-02
Revision 5  2024-07-09
Summary:
This ALERT SERVICE BULLETIN consists in:
- cleaning the spar of the upper fin,
- checking the condition of the spar of the upper fin,
- checking the condition of the upper fin attachment screws.
Reason for last Revision:
The purpose of revision 5 is to cancel compliance with this ALERT SERVICE BULLETIN for helicopters that have
an upper fin assembly P/N 355A14-0522-1751 (POST MOD 0720098).
Compliance:
Compliance with this ALERT SERVICE BULLETIN is mandatory.
Export Control:
US Export Control - No US content. This Item does not contain any U.S. origin ITAR or EAR content.
FR Export Control - Not Listed. This Item is not listed against the EC regulations in the EU/FR
Revision 0 2017-06-27  Page 1/18
Revision 5 2024-07-09  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 2 (OCR)

AIRBUS  HELICOPTERS
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment or parts
NOTE 1
If the reference of the upper fin assembly is not listed in the
tables below or not visible on the part or not identified in the
helicopter documents, you must consider that the effectivity
IS.:
For AS355 and AS555 helicopters: all helicopters are
concerned by this ALERT SERVICE BULLETIN except
for the upper fin assembly P/N 355A14-0522-1751
(POST MOD 0720098) which is not concerned by this
ALERT SERVICE BULLETIN.
For AS350 B3 and AS550 C3 helicopters:
this ALERT SERVICE BULLETIN is only applicable to:
PRE MOD 073148 helicopters or that have embodied
073148 through Service Bulletin AS350 No. 55.00.14 or
AS550 No.55.00.08 "Vertical fin with small trailing edge
NOTE 2
Modification 073148 consists in reducing the length of the
tin's angle bracket in order to reduce the dynamic loads
applied to the rotor.
NOTE 3
Modification  073148  can  be  embodied  through
Service  Bulletins  AS350  No.  55.00.14 and
AS550 No. 55.00.08.
NOTE 4
Refer to the Aircraft Log Book to identify the modification
status of the helicopter.
NOTE 5
This ALERT SERVICE BULLETIN is not applicable to
helicopters that have embodied modification 073148 at
manufacturer level.
NOTE 6
Modification 0720098 consists in replacing the upper fin with
a new one that has a reinforced fin spar and can be
embodied through  ASB AS355 No. 55.00.18 and
AS555 No. 55.00.10.
Revision 0 2017-06-27  Page 2/18
Revision 5 2024-07-09  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 3 (OCR)

AIRBUS  HELICOPTERS
- For AS355 and AS555 helicopters: all helicopters equipped with upper fin assembly listed in the
Table No.1 below are concerned by this ALERT SERVICE BULLETIN:
Designation  Reference
355A08-5508-0201
355A08-5508-0401
355A08-5508-0501
355A08-5508-0601
Upper fin assembly  350A08-5506-0701
350A08-5506-1701
350A08-5506-1801
355A14-0522-1601
355A14-0522-1602
Table No. 1
- For AS350 B3 and AS550 C3 helicopters: this ALERT SERVICE BULLETIN is only applicable to:
. PRE MOD 073148 helicopters equipped with upper fin assembly listed in the Table No.2 below
Designation  Reference
350A08-5506-1201
Upper fin assembly  355A08-5508-0701
350A14-0020-1901
Table No. 2
or
. Helicopters that have embodied modification 073148 through Service Bulletin AS350 No. 55.00.14 or
AS550 No. 55.00.08 and equipped with upper fin assembly listed in the Table No.3 below.
Designation  Reference
350A14-0020-1902
Upper fin assembly
350A08-5506-1201
Table No. 3
1.A.2. Non-installed equipment or parts
Not applicable.
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
Revision 0 2017-06-27  Page 3/18
Revision 5 2024-07-09  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 4 (OCR)

AIRBUS  HELICOPTERS
1.C. REASON
Revision 0:
Airbus Helicopters has been informed of a partial fracture of the spar of the upper fin which occurred during a
flight at low speed. The pilot felt vibrations in the flight controls and landed in accordance with the
instructions given in the Flight Manual. This incident did not affect the safety of the helicopter, its occupants
or persons on the ground.
Inspections revealed a crack in the spar of the upper fin and the fracture of the two front attachment screws
of the fin.
As damage to this connection could, over time, lead to the loss of the fin, Airbus Helicopters introduces
several checks of the upper fin.
Airbus Helicopters renders compliance with this ALERT SERVICE BULLETIN mandatory.
Revision 1:
The purpose of revision 1 of this ALERT SERVICE BULLETIN is to:
- reduce the periodicity of the visual inspection of the RH side of the spar from 55 flight hours to 10 flight
hours,
- delete the visual inspection of the LH side of the spar and the check for the attachment screws of the upper
fin at 55 flight hours,
- add details to the procedure.
Revision 1 of this ALERT SERVICE BULLETIN does not affect compliance with revision 0 of this
ALERT SERVICE BULLETIN.
Revision 2:
A recent analysis has identified that the fatigue damage accumulated with the initial tail fin configuration can
occur on AS350 B3 and AS550 C3 helicopters modified through Service Bulletin AS350 No. 55.00.14 or
AS550 No. 55.00.08.
Because of this, revision 2 extends the effectivity to AS350 B3 and AS550 C3 helicopters that have
embodied modification 073148 through Service Bulletin AS350 No. 55.00.14 or AS550 No. 55.00.08.
Also, for better understanding of the ALERT SERVICE BULLETIN, Airbus Helicopters has used Simplified
Technical English (STE).
Revision 2 of this ALERT SERVICE BULLETIN has no effect on the application of the former revisions of this
ALERT SERVICE BULLETIN.
Revision 3:
A new case of crack on the spar of the upper fin occurred recently on an AS355.
Analyzes following this new crack lead Airbus Helicopters to limit the VNE.
The function of Revision 3 of this ALERT SERVICE BULLETIN is:
- To limit the Velocity Never Exceed (VNE) to 110 knots for helicopters type AS355 and AS555.
- To add the Part Number (P/N) in the effectivity paragraph 1.A.1. for all helicopters.
- To take into account the TSN of the upper fin assembly in case a new upper fin assembly has been
installed, for all helicopters.
Revision 3 of this ALERT SERVICE BULLETIN has no effect on the compliance with former
revisions of this ALERT SERVICE BULLETIN.
Revision 0  2017-06-27  Page 4/18
Revision 5 2024-07-09  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 5 (OCR)

AIRBUS  HELICOPTERS
Revision 4:
The function of Revision 4 of this ALERT SERVICE BULLETIN is:
- To precise the effectivity in case of impossibility to identify the upper fin reference.
- To authorize maintenance flights that require exceeding 110 knots with the condition of an additional
inspection.
- To expand positioning options of the VNE limitation label in the cockpit.
Revision 4 of this ALERT SERVICE BULLETIN has no effect on the compliance with former
revisions of this ALERT SERVICE BULLETIN.
Revision 5:
The purpose of revision 5 is to cancel compliance with this ALERT SERVICE BULLETIN for helicopters that
have an upper fin assembly P/N 355A14-0522-1751 (POST MOD 0720098).
Revision 5 of this ALERT SERVICE BULLETIN has no effect on the compliance with former
revisions of this ALERT SERVICE BULLETIN.
1.D. DESCRIPTION
This ALERT SERVICE BULLETIN includes the work steps that follow:
For all helicopters:
- Cleaning the spar of the upper fin.
- Checking the condition of the spar of the upper fin.
- Checking the condition of the upper fin attachment screws.
For helicopters AS355 and AS555 only:
- Limit the VNE to 110 knots
- Install a label in the cockpit.
1.E. COMPLIANCE
1.E.1. Compliance at H/C manufacturer level
Not applicable.
1.E.2. Compliance in service
The operator must do the work on the helicopter.
The visual inspection (paragraph 3.B.2.) can be done by a pilot with correct training and accreditation in
compliance with the local regulation in force.
Helicopters/installed equipment or parts:
NOTE T
The compliance times defined in this paragraph refer to the
flight hours accumulated by the helicopter when the upper
tin  assembly  has  not  been  replaced.
If a new upper fin assembly has been installed, the TSN to
be taken into account is the one of the upper fin assembly.
Revision 0  2017-06-27  Page 5/18
Revision 5 2024-07-09  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 6 (OCR)

AIRBUS  HELICOPTERS
1.E.2.a. For AS355 and AS555 helicopters and for AS350 B3 and AS550 C3 helicopters that are
PRE MOD 073148:
- For helicopters or upper fin assembly with a TSN that is less than or equal to 605 flight hours:
. Do cleaning and a condition check: refer to paragraphs 3.B.1. and 3.B.3. when you get to
660 flight hours.
Then:
. Every 10 flight hours, comply with paragraphs 3.B.1. and 3.B.2.
Then:
. Every 660 flight hours, comply with paragraphs 3.B.1. and 3.B.3.
- For helicopters or upper fin assembly with a TSN that is more than 605 flight hours:
. Do a visual check (refer to paragraphs 3.B.1. and 3.B.2.):
.. In less than 55 flight hours after you received revision 1 of this ALERT SERVICE BULLETIN issued
on July 22, 2020
. Before you get to 55 flight hours since the last inspection.
Then:
• Every 10 flight hours, comply with paragraphs 3.B.1. and 3.B.2.
Then:
. Only for helicopters that had more than 605 flight hours on receipt of revision 0 of this
ALERT SERVICE BULLETIN:
• In less than 165 flight hours after you received revision 0 of this ALERT SERVICE BULLETIN
(refer to the issue date on the page footer), comply with paragraphs 3.B.1. and 3.B.3.
Then:
• Every 660 flight hours, comply with paragraphs 3.B.1. and 3.B.3.
1.E.2.b. For AS350 B3 and AS550 C3 helicopters that have embodied modification 073148 through
Service Bulletins AS350 No. 55.00.14 and AS550 No. 55.00.08:
- For helicopters or upper fin assembly with a TSN that is less than or equal to 605 flight hours:
Do cleaning and a condition check: refer to paragraphs 3.B.1. and 3.B.3. when you get to
660 flight hours.
Then:
• Every 10 flight hours: comply with paragraphs 3.B.1. and 3.B.2.
Then:
. Every 660 flight hours, comply with paragraphs 3.B.1. and 3.B.3.
- For helicopters or upper fin assembly with a TSN that is more than 605 flight hours:
. Do a visual check: refer to paragraphs 3.B.1. and 3.B.2. in less than 55 flight hours after you received
revision 2 of this ALERT SERVICE BULLETIN (refer to the issue date on the page footer).
Then:
• Every 10 flight hours, comply with paragraphs 3.B.1. and 3.B.2.
• In less than 165 flight hours after you received revision 2 of this ALERT SERVICE BULLETIN
(refer to the issue date on the page footer), comply with paragraphs 3.B.1. and 3.B.3.
Then:
. Every 660 flight hours, comply with paragraphs 3.B. 1. and 3.B.3.
Revision 0  2017-06-27  Page 6/18
Revision 5 2024-07-09  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 7 (OCR)

AIRBUS  HELICOPTERS
1.E.2.c. For AS355 and AS555 helicopters:
- For helicopters or upper fin assembly with a TSN that is less than or equal to 660 flight hours:
. Before exceeding 660 flight hours:
.. Limit the VNE to 110 knots (203 km/h). Refer to Appendix 4.A.
.. Locally make one or more labels. Refer to Appendix 4.B.
.. Attach the locally made label(s) in the cockpit so that the limitations indicated on the label(s)
are visible to the pilot and the copilot.
NOTE 8
The installer should identify the adequate position in the
cockpit ensuring that the label(s) are in clear view of the pilot
in command (for example instrument panel or in the
overhead panel surrounding area. In case of doubt about
correct positioning, contact airbus helicopters for advice at
the address that follow:
Airbus world: technical request management
https://airbusworld.helicopters.airbus.com
email:support.technical-airframe.ah@,airbus.com
„ Some maintenance flights, as defined in section 8.3 "Test Sheets" of the Flight Manual (FLM), require
to fly beyond 110 kts (203 km/h). These maintenance flights are triggered by periodic checks or
components replacement.
.. The test conditions listed in the FLM during which the 110 kts (203 km/h) limitation may be exceeded
are:
- MCP (Maximum Continuous Power) level flight.
- VNE power-on.
- VNE power-off.
.. In case of need to perform such a maintenance flight requiring to fly beyond 110 kts (203 km/h),
comply with paragraphs 3.B.1. and 3.B.2. before the maintenance flight and comply with paragraphs
3.B.1. and 3.B.3. before the next flight that follows the maintenance flight.
.. In the other cases of 110 Kts VNE exceedance, comply with paragraphs 3.B.1. and 3.B.2. before the
next flight.
- For helicopters or upper fin assembly with a TSN that is more than 660 flight hours:
• Within 7 days after you receive the Revision 3 of this ALERT SERVICE BULLETIN
(refer to the issue date on the page footer):
.. Limit the VNE to 110 knots (203 km/h). Refer to Appendix 4.A.
.. Locally make one or more labels. Refer to Appendix 4.B.
.. Attach the locally made label(s) in the cockpit so that the limitations indicated on the label(s)
are visible to the pilot and the copilot.
NOTE 9
The installer should identify the adequate position in the
cockpit ensuring that the label (s) are in clear view of the pilot
in command for example instrument panel or in the
overhead panel surrounding area. In case of doubt about
correct positioning, contact airbus helicopters for advice at
the address that follow:
Airbus world: technical request management
https://airbusworld.helicopters.airbus.com
email: support.technical-airframe.ah@airbus.com
.. Some maintenance flights, as defined in section 8.3 "Test Sheets" of the FLM, require to fly beyond
110 kts (203 km/h). These maintenance flights are triggered by periodic checks or components
replacement.
Revision O  2017-06-27  Page 7/18
Revision 5 2024-07-09  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 8 (OCR)

AIRBUS  HELICOPTERS
.. The test conditions listed in the FLM during which the 110 kts (203 km/h) limitation may be exceeded
are:
- MCP level flight.
- VNE power-on.
- VNE power-off.
.. In case of need to perform such a maintenance flight requiring to fly beyond 110 kts (203 km/h), comply
with paragraphs 3.B.1. and 3.B.2. before the maintenance flight and comply with paragraphs 3.B.1. and
3.B.3. before the next flight that follows the maintenance flight.
.. In the other cases of 110 Kts VNE exceedance, comply with paragraphs 3.B.1. and 3.B.2. before
the next flight.
Non-installed equipment or parts:
Not applicable.
1.F. APPROVAL
The technical content of this document is approved under the authority of the Design Organization Approval
ref. EASA. 21J.700.
The technical content of this document is approved under the prerogatives of the recognition of design
capability ref. EMAR21J-015-DGA for French Government helicopters.
The technical content of this document is approved by Airbus Helicopters Airworthiness Department for
export military versions.
1.G. MANPOWER
Airbus Helicopters recommends that the personnel who will do this ALERT SERVICE BULLETIN have these
qualifications:
Qualification: 1 Airframe Technician for compliance with paragraph 3. or 1 Pilot with correct training and
accreditation in compliance with the local regulation in force for compliance with
paragraphs 3.B.1., 3.B.2. and 3.B.4.
The man-hours are an estimate given for information only and for a standard helicopter configuration.
Estimated Man-hours: Half hour for the 10-FH inspection.
1.H. WEIGHT AND BALANCE
There is no change in weight and moment.
1.I. POWER CONSUMPTION
Not changed.
1.J. SOFTWARE UPGRADES/UPDATES
Not applicable.
Revision 0  2017-06-27  Page 8/18
Revision 5 2024-07-09  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 9 (OCR)

AIRBUS  HELICOPTERS
1.K. REFERENCES
These documents are necessary to comply with this ALERT SERVICE BULLETIN:
Maintenance Manual (MET):
Work Card: 33-41-00-501: Position Lights - Operation testing
Work Card: 55-00-00-601: Stabilizer - Checking
Aircraft Maintenance Manual (AMM):
Task: 33-41-00, 5-1a: Functional Tests - Position Lights PRE MOD 074280
Task: 33-41-00, 5-1b: Functional Tests - Position Lights POST MOD 074280
Task: 55-20-00, 6-2: Check - Upper and lower vertical stabilisers
Standard Practices Manual (MTC):
Work Card: 20-02-09-101: Crack detection - Crack detection through dye-penetrant inspection: General
Work Card: 20-02-09-601: Crack detection - Checking structural parts / components using the dye penetrant
Work Card: 20-04-01-102: Cleaning - Use of cleaning products on individual parts and on aircraft
Work Card: 20-07-03-406: Technical instructions - Instructions applicable when working on an aircraft
electrical circuit and power generating systems
Work Card: 20-07-03-408: Technical instructions - Appearance checks on an aircraft after an inspection or
Information Notice (IN):
IN: 3481-1-00: The Marketplace: an AirbusWorld Ordering service
IN: 3785-1-00: Introduction of the digital Service Bulletin reporting service SB Insight
Safety Promotion Notice (SPN):
SPN: 3703-P-00: GENERAL - Foreign Object Damage prevention
OTHER AFFECTED PUBLICATIONS
The Flight Manual (FLM) will be updated.
1.M. PART INTERCHANGEABILITY OR MIXABILITY
This ALERT SERVICE BULLETIN has no effect on the interchangeability and mixability.
Revision 0 2017-06-27  Page 9/18
Revision 5 2024-07-09  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 10 (OCR)

AIRBUS  HELICOPTERS
2. EQUIPMENT OR PARTS INFORMATION
2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT
Not applicable.
2.B. LOGISTIC INFORMATION
Not applicable.
2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT
Consumables to be ordered separately:
Refer to the Work Cards and Tasks identified in this ALERT SERVICE BULLETIN.
You can order the consumables from the AirbusWorld Marketplace through e-ordering (IN 3481-1-00).
If you cannot get access to e-ordering, please contact your Logistic Focal Point.
2.D. EQUIPMENT OR PARTS TO BE RETURNED
Not applicable.
Revision 0 2017-06-27  Page 10/18
Revision 5 2024-07-09  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 11 (OCR)

AIRBUS  HELICOPTERS
3. ACCOMPLISHMENT INSTRUCTIONS
3.A. GENERAL
Comply with the general instructions on crack detection by dye-penetrant inspection, refer to
Work Card 20-02-09-101 (MTC).
3.B. WORK STEPS
CAUTION
MAKE SURE THAT YOU PREVENT ALL POSSIBLE
SAFETY PROMOTION NOTICE FEST  SAFETY  PROMOTION  (SPN)
NO. 3703-P-00.
3.B.1. Preliminary steps
- Disconnect all electrical power supplies: refer to Work Card 20-07-03-406 (MTC).
- Install access equipment.
3.B.2. Visual inspection (Figure 1)
- Without removing the rear and the TGB fairings, visually check that there are no cracks on the
RH side of spar (a) (see Figure 1) and if needed, clean the area, refer to Work Card 20-04-01-102 (MTC):
NOTE 1
A light source must be used to make the visual check easier.
. If you are not sure, remove the rear fairings and the TGB fairings to do a detailed inspection.
. Do a dye-penetrant inspection, refer to Work Card 20-02-09-601 (MTC):
.. If there are no cracks, leave as is.
.. If there are cracks, before continuing flights, get in communication with the Airbus Helicopters
Customer Service Technical Support: refer to Note 2 to get a repair solution.
NOTE 2
Airbus Helicopters Customer Support contact data:
Tel: +33 (0)4.42.85.97.89
Fax: + 33 (0)4.42.85.99.66
E-mail: support.technical-airframe.ah@airbus.com
Keycopter: Technical Request Management
(Technica/Support. Helicopters@airbus.com)
- Do the final steps: refer to paragraph 3.B.4.
Revision 0  2017-06-27  Page 11/18
Revision 5 2024-07-09  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 12 (OCR)

AIRBUS  HELICOPTERS
3.B.3. Cleaning and condition check (Figures 2 and 3)
- Remove the rear fairing from the tail boom.
- Remove the TGB fairing.
- Disconnect the cut-off connector of the tail position light.
- Clean (refer to Work Card 20-04-01-102 (MC)):
• The spar (a) (Figure 2)
• Area Z (Detail A, Figure 2)
. The heads of the attachment screws (b) (Detail B, Figure 2) of the upper fin.
- Do a visual check for cracks in the spar (a) of the top and bottom fins (see example of crack: refer to
Figure 3): refer to Work Card 55-00-00-601 (MET) or Task 55-20-00, 6-2 (AMM):
• If you are not sure, do a dye-penetrant inspection: refer to Work Card 20-02-09-101 (MTC):
CAUTION
PAY PARTICULAR ATTENTION TO THE 50 MM
RADIUS, SEE AREA Z, DETAIL A.
. If there are no cracks, leave as is.
• If there are cracks, before continuing flights, contact the Airbus Helicopters Customer Service Technical
Support: refer to Note 2.
- Check the integrity of the two thrust pad attachment screws (b) (Detail B, Figure 2):
. If no damage is found, leave as is.
. If damage is found, before continuing flights, contact the Airbus Helicopters Customer Service Technical
Support: refer to Note 2.
- Connect the cut-off connector of the tail position light.
- Do a functional test: refer to Work Card 33-41-00-501 (MET) or Task 33-41-00, 5-1 (AMM).
- Install the TGB fairing.
- Install the rear fairing of the tail boom.
- Do the final steps: refer to paragraph 3.B.4.
3.B.4. Final steps
- Remove the access equipment.
- Connect all electrical power supplies.
- Do a check of the appearance of the helicopter: refer to Work Card 20-07-03-408 (MTC).
Revision 0 2017-06-27  Page 12/18
Revision 5 2024-07-09  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 13 (OCR)

AIRBUS  HELICOPTERS
3.C. RECORD OF COMPLIANCE
Compliance with this document:
- Record first compliance with this ALERT SERVICE BULLETIN, with the revision number, in the helicopter
documents.
- Record compliance with this ALERT SERVICE BULLETIN (see IN 3785-1-00 for instructions):
QR code or hypertext link
NOTE 3
recording  compliance
ALERT  SERVICE  BULLETINS
SB Insight tool does not replace the recording in the
helicopter documents.
EASB AS350 05.00.90
3.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Not applicable.
Revision 0 2017-06-27  Page 13/18
Revision 5 2024-07-09  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 14 (OCR)

AIRBUS  HELICOPTERS
a
Back to paragraph 3.B.2.
Figure 1: visual inspection
Revision 0 2017-06-27  Page 14/18
Revision 5 2024-07-09  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 15 (OCR)

AIRBUS  HELICOPTERS
a
FWD
FWD
50 mm radius
Area Z
Back to paragraph 3.B.3.
Figure 2: definition of the inspection areas
Revision 0 2017-06-27  Page 15/18
Revision 5 2024-07-09  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 16 (OCR)

AIRBUS  HELICOPTERS
Back to paragraph 3.B.3.
Figure 3: example of a crack in the spar of the upper fin
Revision 0 2017-06-27  Page 16/18
Revision 5 2024-07-09  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 17 (OCR)

AIRBUS  HELICOPTERS
4. APPENDICES
4.A. COMPLIANCE TO THE VNE LIMIT
- VNE Power-on:
. VNE power-on: refer to Figure 4.
. From 0 ft to 16,000 ft (4876 m)  ... 110 kt (203 km/h)
. Above 16,000 ft (4876 m).  • 110 kt - 2.5 kt / 1,000 ft (4.6 km/h per 300 m) (pressure-altitude)
CAUTION
COLD  WEATHER: WHEN OUTSIDE AIR
TEMPERATURE (OAT) IS LESS THAN -35°C,
SUBTRACT 10KT (19 KM/H) FROM THE VNE
SPECIFIED ABOVE.
- VNE Power-off:
. VNE power-off: refer to Figure 4.
. From 0 ft to 4,000 ft (1219 m)  .110 kt (203 km/h)
• Above 4,000 ft (1219 m).  110 kt - 2.5 kt / 1,000 ft (4.6 km/h per 300 m) (pressure-altitude)
CAUTION
IN COLD WEATHER, REDUCE THE VNE AS
FOLLOWS: 20KT (37 KM/H) WHEN OAT IS BELOW
-25°C,  WITHOUT DROPPING BELOW 65KT
(120 KM/H).
20
18  VNE power-on
16
Hp (ft x 1000)  12  VNE power-off
10
60  80  90  100  110  120
IAS (kt)
Figure 4
For memory:
• For AS355 versions E; F;F1; F2 and AS555 versions AF; UF helicopters:
Maximum pressure-altitude (substantiated)..  ..... 16 000 ft (4875m)
• For AS355 versions N;NP and AS555 versions AN; AP; SN; UN helicopters:
Maximum pressure-altitude (substantiated)...  ....20 000 ft (6096m)
Revision 0 2017-06-27  Page 17/18
Revision 5 2024-07-09  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

### Page 18 (OCR)

AIRBUS  HELICOPTERS
4.B. LOCALLY MADE LABEL
Characteristics of the locally made label (1) or (2) or (3):
- Font in white color with a red background or in red color with a white background for civil versions.
- Font in black color with a yellow background for military versions.
- Font size more than or equal to: 4 mm (.157 in).
- The locally made label (1) or (2) or (3) must not be easily erasable.
- The locally made label (1) or (2) or (3) must not be easily damageable.
- The text is given in English but can be translated into another language, as per the local regulations in force.
- Example of locally made label:
VNE Power-on:
From 0 ft to 16,000 ft...  ...110 kt
Above 16,000 ft......... 110kt - 2.5 kt/1,000 ft (pressure-altitude)
VNE Power-off:
From 0 ft to 4,000 ft  .. 110 kt
Above 4,000 ft  • 110 kt - 2.5 kt/1,000 ft (pressure-altitude)
VNE Power-on:
From 0 ft to 16,000 ft.  ..110 kt
Above 16,000 ft..  110kt - 2.5 kt/1,000 ft (pressure-altitude)
2
VNE Power-off:
From 0 ft to 4,000 ft..  ..110 kt
Above 4,000 ft..  ..110 kt - 2.5 kt/1,000 ft (pressure-altitude)
VNE Power-on:
From 0 ft to 16,000 ft..  110 kt
Above 16,000 ft  .. 110kt - 2.5 kt/1,000 ft (pressure-altitude)
•
VNE Power-off:
From 0 ft to 4,000 ft..  ..110 kt
Above 4,000 ft..  .110 kt - 2.5 kt/1,000 ft (pressure-altitude)
Revision O  2017-06-27  Page 18/18
Revision 5 2024-07-09  This document is available on the Internet: www.airbushelicopters.com/techpub/
Export Control: US_EC_NoUScontent - FR_EC_NotListed

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
