# Airbus Service Bulletin 28-6106

Copy: Revision 3 ("SB_28-6106_r03"), 76 pages: PDF https://openairdocs.org/files/sha256/f9/df/f9df3cfc36cb5816f194b187dfa0bb9a179573ad5c6f8159649f1a53e5d489b7; text https://openairdocs.org/service-documents/airbus/sb-28-6106/file/f9df3cfc36cb.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2017-0714, the docket of AD 2017-25-09. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: 28-6106
- Latest revision known: 28-6106, Revision 3 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/airbus/sb-28-6106

## Text (76 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2017-0714, the docket of AD 2017-25-09. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

@A300-600
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 28
TITLE: FUEL - FUEL PUMP SYSTEM - INSPECTION OF THE FUEL PUMP
CANISTER HOOD
MODIFICATION No.: None
This page transmits Revision No.03 of Service Bulletin No.A300-28-6106
ADDITIONAL WORK
**CONF ALL
No additional work is required by this revision for aircraft inspected by any previous issue.
REASON
Revision No. 03 issued to:
- Reinstate the repetitive inspection of the outer wing tank fuel pumps and trim tank fuel pumps
- Cancel the repetitive inspection of the center and trim tank and inner and outer wing tank fuel
pumps if Modifications No. 13644H5743 and 13739H5755 (Service Bulletin No. A300-28-6110)
and Modifications No. 13643H5740 and 13740H5756 (Service Bulletin No. A300-28-6114) are
embodied.
CHANGES
The main changes of this revision are:
- Revise the configurations for aircraft to clarify the inspection requirements
- Add the repeat inspection of the outer wing tank and trim tank fuel pump to the ’Compliance
Timescale’
- Add the reference to Service Bulletin No. A300-28-6114 (Modification No. 13643H5740 and
13740H5756) as means to cancel the repetitive inspection of the outer tank pumps
- Revise the manhours to reflect the extra inspection of the outer wing tank and trim tank fuel pump
- Update the CML references
- Revise Detailed Visual Inspection (DVI) to read Detailed Inspection (DI)
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 2

@A300-600
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
- Revise the ’Flowchart’
- Revise the ’Manpower Gantt Chart’
- Update the Service Bulletin effectivity
- Update the Operational/Maintenance Consequences paragraph
- Add Maintenance Planning Document (MPD) Task No. 282100-05-1, 282100-06-1 and
282100-06-2 to the PUBLICATIONS AFFECTED paragraph.
FRONT MATTER
FUEL - FUEL PUMP SYSTEM -
INSPECTION OF THE FUEL PUMP
CANISTER HOOD
CONFIGURATION UPDATED
 R
SUMMARY
REASON/DESCRIPTION/OPERATIONAL
CONSEQUENCES
REASON UPDATED
 R
MATERIAL PRICE INFORMATION
 MATERIAL PRICE INFORMATION TABLE
UPDATED
R
MATERIAL PRICE INFORMATION TABLE
UPDATED
R
MATERIAL PRICE INFORMATION TABLE
DELETED FOR APPLICABLE MSN
D
EFFECTIVITY
 OPERATOR LIST UPDATED
 R
REFERENCES / REPERCUSSIONS
 REFERENCES/REPERCUSSIONS TABLE
UPDATED
R
MANPOWER
 MANPOWER UPDATED
 R
MANPOWER UPDATED
 R
MANPOWER DELETED FOR APPLICABLE MSN
 D
APPENDICES
 APPENDICES UPDATED
 R
Fig. A-USAAC
 FIGURE SOLUTION DELETED FOR APPLICABLE
MSN
D
PLANNING INFORMATION
EFFECTIVITY
 EFFECTIVITY RELATED INFORMATION
UPDATED
R
Configuration definition
 CONFIGURATION LIST UPDATED
 R
CONF 001
 CONFIGURATION DEFINITION UPDATED
 R
CONF 002
 CONFIGURATION DEFINITION UPDATED
 R
Configuration definition
 CONFIGURATION DELETED
 D
Material Effectivity
 MATERIAL EFFECTIVITY UPDATED
MATERIAL SET QUANTITY UPDATED
R
MATERIAL EFFECTIVITY UPDATED
MATERIAL SET QUANTITY UPDATED
R
MATERIAL EFFECTIVITY DELETED FOR
APPLICABLE MSN
D
REASON
History
 HISTORY UPDATED
 R
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 3

@A300-600
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
Objective/Action
 OBJECTIVE/ACTION UPDATED
 R
Advantages
 ADVANTAGES UPDATED
 R
Operational/Maintenance
Consequences
OPERATIONAL/MAINTENANCE CONSEQUENCES
UPDATED
R
DESCRIPTION
 DESCRIPTION UPDATED
 R
COMPLIANCE
Accomplishment Timescale
 ACCOMPLISHMENT TIMESCALE UPDATED
CONFIGURATION UPDATED
R
Accomplishment Timescale
 ACCOMPLISHMENT TIMESCALE ADDED
 N
MANPOWER
 MANPOWER UPDATED
 R
MANPOWER UPDATED
 R
MANPOWER DELETED FOR APPLICABLE MSN
 D
REFERENCES
 REFERENCED DOCUMENTATION UPDATED
 R
REFERENCED DOCUMENTATION UPDATED
 R
REFERENCED DOCUMENTATION DELETED FOR
APPLICABLE MSN
D
PUBLICATION AFFECTED
 PUBLICATIONS AFFECTED UPDATED
 R
PUBLICATIONS AFFECTED ADDED
 N
MATERIAL INFORMATION
LIST OF MATERIALS - OPERATOR
SUPPLIED
Consumable Materials
Consumable CMLB01
 CONSUMABLE MATERIAL SET UPDATED
CONSUMABLE UPDATED
R
Equipment
Equipement BFEB01
 PART MATERIAL SET UPDATED
 R
Equipement BFEB02
 PART MATERIAL SET UPDATED
 R
ACCOMPLISHMENT INSTRUCTIONS
TASK 286106- 832-895-001-Inspection
 TASK SOLUTION UPDATED
NOTE UPDATED
CAUTION UPDATED
R
Task associated data - 001
 PANEL UPDATED
MAN HOURS UPDATED
ELAPSED TIME UPDATED
R
Task associated data - 002
 PANEL UPDATED
MAN HOURS UPDATED
ELAPSED TIME UPDATED
R
Task associated data - 003
 TASK ASSOCIATED DATA DELETED FOR
APPLICABLE MSN
D
GENERAL
 TOPIC CONTENT DELETED FOR APPLICABLE
MSN
D
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 4

@A300-600
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
Subtask 286106-941-401-001
 SUBTASK SOLUTION UPDATED
LOCATION UPDATED
PANEL UPDATED
ZONE UPDATED
REFERENCED DOCUMENTATION UPDATED
WARNING UPDATED
NOTE UPDATED
CONFIGURATION UPDATED
MANPOWER RESSOURCE UPDATED
REFERENCES UPDATED
R
Subtask 286106-941-401-004
 SUBTASK SOLUTION ADDED
 N
Subtask 286106-941-401-001
 SUBTASK SOLUTION DELETED FOR
APPLICABLE MSN
D
Subtask 286106-941-402-001
 SUBTASK SOLUTION DELETED FOR
APPLICABLE MSN
D
PREPARATION
 TOPIC CONTENT DELETED FOR APPLICABLE
MSN
D
Subtask 286106-832-401-001
 SUBTASK SOLUTION UPDATED
LOCATION UPDATED
PANEL UPDATED
ZONE UPDATED
CONSUMABLE UPDATED
REFERENCED DOCUMENTATION UPDATED
CONFIGURATION UPDATED
WARNING UPDATED
QUANTITY UPDATED
ITEM NUMBER UPDATED
PART NUMBER UPDATED
PART NUMBER DESCRIPTION UPDATED
FIN UPDATED
FIGURE REFERENCE UPDATED
MANPOWER RESSOURCE UPDATED
MATERIAL LIST UPDATED
REFERENCES UPDATED
NOTE UPDATED
R
Subtask 286106-832-403-001
 SUBTASK SOLUTION ADDED
 N
Subtask 286106-832-402-001
 SUBTASK SOLUTION UPDATED
LOCATION UPDATED
PANEL UPDATED
ZONE UPDATED
CONSUMABLE UPDATED
REFERENCED DOCUMENTATION UPDATED
CONFIGURATION UPDATED
WARNING UPDATED
MANPOWER RESSOURCE UPDATED
MATERIAL LIST UPDATED
REFERENCES UPDATED
FIGURE REFERENCE UPDATED
NOTE UPDATED
R
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 5

@A300-600
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
Subtask 286106-832-401-001
 SUBTASK SOLUTION UPDATED
LOCATION UPDATED
PANEL UPDATED
ZONE UPDATED
CONSUMABLE UPDATED
REFERENCED DOCUMENTATION UPDATED
FIGURE REFERENCE UPDATED
CONFIGURATION UPDATED
WARNING UPDATED
QUANTITY UPDATED
ITEM NUMBER UPDATED
PART NUMBER UPDATED
PART NUMBER DESCRIPTION UPDATED
FIN UPDATED
MANPOWER RESSOURCE UPDATED
MATERIAL LIST UPDATED
REFERENCES UPDATED
NOTE UPDATED
R
Subtask 286106-832-403-001
 SUBTASK SOLUTION ADDED
 N
Subtask 286106-832-402-001
 SUBTASK SOLUTION UPDATED
LOCATION UPDATED
PANEL UPDATED
ZONE UPDATED
CONSUMABLE UPDATED
REFERENCED DOCUMENTATION UPDATED
CONFIGURATION UPDATED
FIGURE REFERENCE UPDATED
WARNING UPDATED
MANPOWER RESSOURCE UPDATED
MATERIAL LIST UPDATED
REFERENCES UPDATED
NOTE UPDATED
R
Subtask 286106-832-404-002
 SUBTASK SOLUTION ADDED
 N
Subtask 286106-832-403-002
 SUBTASK SOLUTION DELETED FOR
APPLICABLE MSN
D
PROCEDURE
 TOPIC CONTENT DELETED FOR APPLICABLE
MSN
D
TEST
 TOPIC CONTENT DELETED FOR APPLICABLE
MSN
D
Subtask 286106-942-401-001
 SUBTASK SOLUTION UPDATED
NOTE UPDATED
R
Subtask 286106-942-401-001
 SUBTASK SOLUTION UPDATED
NOTE UPDATED
R
CLOSE-UP
 TOPIC CONTENT DELETED FOR APPLICABLE
MSN
D
TASK 286106- 833-895-001-Replace
 TASK SOLUTION UPDATED
NOTE UPDATED
CAUTION UPDATED
R
Task associated data - 001
 PANEL UPDATED
ZONE UPDATED
R
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 5
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 6

@A300-600
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
Task associated data - 002
 PANEL UPDATED
ZONE UPDATED
R
Task associated data - 003
 TASK ASSOCIATED DATA DELETED FOR
APPLICABLE MSN
D
Subtask 286106-910-402-001
 SUBTASK SOLUTION ADDED
 N
Subtask 286106-910-402-001
 SUBTASK SOLUTION ADDED
 N
GENERAL
 TOPIC CONTENT DELETED FOR APPLICABLE
MSN
D
Subtask 286106-941-403-001
 SUBTASK SOLUTION ADDED
 N
Subtask 286106-941-403-001
 SUBTASK SOLUTION ADDED
 N
Subtask 286106-941-404-001
 SUBTASK SOLUTION ADDED
 N
PREPARATION
 TOPIC CONTENT DELETED FOR APPLICABLE
MSN
D
Subtask 286106-833-401-001
 SUBTASK SOLUTION UPDATED
REFERENCED DOCUMENTATION UPDATED
CONSUMABLE UPDATED
MATERIAL LIST UPDATED
REFERENCES UPDATED
NOTE UPDATED
R
Subtask 286106-833-401-001
 SUBTASK SOLUTION UPDATED
REFERENCED DOCUMENTATION UPDATED
CONSUMABLE UPDATED
MATERIAL LIST UPDATED
REFERENCES UPDATED
NOTE UPDATED
R
PROCEDURE
 TOPIC CONTENT DELETED FOR APPLICABLE
MSN
D
TEST
 TOPIC CONTENT DELETED FOR APPLICABLE
MSN
D
Subtask 286106-942-402-001
 SUBTASK SOLUTION UPDATED
 R
Subtask 286106-942-402-001
 SUBTASK SOLUTION UPDATED
 R
CLOSE-UP
 TOPIC CONTENT DELETED FOR APPLICABLE
MSN
D
Fig. A-UAAAA
 FIGURE SOLUTION UPDATED
CONFIGURATION UPDATED
R
Fig. A-UAAAA Sheet 01
 SHEET UPDATED
 R
Fig. A-UAAAB
 FIGURE SOLUTION UPDATED
CONFIGURATION UPDATED
R
Fig. A-UAAAB Sheet 01
 SHEET UPDATED
 R
Fig. A-UBAAA
 FIGURE SOLUTION UPDATED
CONFIGURATION UPDATED
R
Fig. A-UBAAB
 FIGURE SOLUTION DELETED FOR APPLICABLE
MSN
D
Fig. A-UCAAA
 FIGURE SOLUTION UPDATED
 R
Appendix 01: Inspection Findings - Reporting Sheet
Fig. A-UACAA
 FIGURE SOLUTION ADDED
 N
Fig. A-UACAA Sheet 01
 SHEET ADDED
 N
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 6
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 7

@A300-600
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
Fig. A-UACAB
 FIGURE SOLUTION ADDED
 N
Fig. A-UACAB Sheet 01
 SHEET ADDED
 N
APPENDIX
 APPENDIX DELETED
 D
Appendix 02: Manpower Gantt Chart
Fig. A-UABAA
 FIGURE SOLUTION UPDATED
 R
Fig. A-UABAA Sheet 01
 SHEET UPDATED
 R
Fig. A-UABAB
 FIGURE SOLUTION UPDATED
 R
Fig. A-UABAB Sheet 01
 SHEET UPDATED
 R
Fig. A-UABAC
 FIGURE SOLUTION DELETED FOR APPLICABLE
MSN
D
FILING INSTRUCTIONS
This Service Bulletin has been generated electronically and is reissued as a complete document.
Replace the complete document.
Put this Revision Transmittal Sheet in front of the Service Bulletin.
HISTORY OF PREVIOUS REVISIONS
Revision No. 01 issued to add the Equipment BFEB02 for the Canister Hood PN 3C93-129 (part of Fuel
Pump Canister PN C93R51-601).
Revision No. 02 issued to:
cancel the repetitive inspection of the center tank fuel pumps and inner wing tank fuel pumps if
Modification No. 13644H5743 (Service Bulletin No. A300-28-6110) is embodied
cancel the repetitive inspection of the outer wing tank fuel pumps and trim tank fuel pumps, but retain a
one-off inspection at all pump locations for aircraft that have not already accomplished this Inspection
Service Bulletin at previous revisions.
REVISION SEQUENCE
ORIGINAL: Jan 13/11
REVISION No. : 01 - Apr 15/11
REVISION No. : 02 - Apr 25/14
REVISION No. : 03 - Dec 16/16
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 7
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 8

@A300-600
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
This Page Intentionally Left Blank
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 8
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 9

@A300-600
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
This summary is for information only and is not approved for modification of the aircraft.
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 28
TITLE: FUEL - FUEL PUMP SYSTEM - INSPECTION OF THE FUEL PUMP
CANISTER HOOD
**CONF ALL
MODIFICATIONS
None
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
Some operators have reported cases of cracking on the hood of the inboard and outboard fuel pump
canisters located in the inner fuel tanks and the hoods of the center tank canisters. More recently,
cracking has also been reported on the inlet hoods of the outer tank pumps.
The hood is part of the fuel pump canister and forms a surface between the pump inlet mesh and the
canister body. The hood is fabricated from thin aluminium alloy in two halves.
On one aircraft the detached parts were reported as consisting of two separate pieces. One annular
section was subsequently found in the fuel tank.
This Inspection Service Bulletin (ISB) introduces a repetitive Detailed Inspection (DI) of all fuel pump
locations (center, wing inner, wing outer and trim tank). The inspection will also assess which locations
are subject to such cracking, and which hoods must be replaced. The Inspection must be done not
more than 30 months after the issue date of this Service Bulletin and repeated every 30 months.
Replacement of failed hood halves will prevent possible contamination issues and establish which
locations are subject to cracking. Replace both hood halves if cracks are found in one of the two
halves. You must find and remove all broken pieces from the fuel tanks.
Operators that have not yet performed this inspection on their aircraft in accordance with this
Service Bulletin, (at any revision) are required to provide feedback to AIRBUS following their first
accomplishment of this Service Bulletin. There is no feedback requirement for aircraft inspected under
the repeat inspection requirements of this Service Bulletin.
Accomplishment of Service Bulletin No. A300-28-6110 is the terminating action for the repeat inspection
of the center and inner wing tank pump inspection requirements of this Service Bulletin.
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 10

@A300-600
SERVICE BULLETIN
SUMMARY
Accomplishment of Service Bulletin No. A300-28-6114 is the terminating action for the repeat inspection
of the trim tank and outer wing tank pump inspection requirements of this Service Bulletin.
The Operational/Maintenance Consequences of this Service Bulletin are covered by the update of the
affected publications detailed in "PLANNING INFORMATION".
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE
 MANDATORY (1)
 CANCELS INSPECTION SB
 NO
POTENTIAL AD
 YES
 A/C OPERATION AFFECTED
 NO
RELIABILITY AFFECTED
 NO
 PAX COMFORT AFFECTED
 NO
COST SAVING
 NO
 ETOPS AFFECTED
 NO
STRUCTURAL LIFE EXTN
 NO
 VENDOR SB INVOLVED
 NO
DEFUEL/VENTILATION
 YES
 PRE-ENTRY CHECKLIST
 YES
NOTE
 (1)
: Service Bulletin must be accomplished.
MATERIAL PRICE INFORMATION
**CONF 001
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Equipment BFEB01
 1
 See SB
 Hood halves
Equipment BFEB02
 1
 See SB
 Hood halves
**CONF 002
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Equipment BFEB01
 1
 See SB
 Hood halves
Equipment BFEB02
 1
 See SB
 Hood halves
EFFECTIVITY
**CONF ALL
This Service Bulletin is applicable to this (these) operator(s) :
67Q ABR AHK BCS FDX IRA IRM KAC MNB MRJ MSR SOP
 SUD
TAR THA UPS UQA
 URS UTP
CONCURRENT REQUIREMENTS
None
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 11

@A300-600
SERVICE BULLETIN
SUMMARY
REFERENCES / REPERCUSSIONS
TFU
 28.21.13.001
OEB
 None
AOT
 None
SIL
 None
ISI
 None
LINE MAINTENANCE AFFECTED
 No
LIFE LIMIT
 None
OTHER
 None
NATURE OF THE WORK
AIRCRAFT
 YES
EQUIPMENT
 NO
HARD
 NO
SOFT
 NO
OBRM
 NO
MANPOWER
**CONF 001
Task 286106-832-895-001: Inspection
TOTAL MANHOURS
 8.75
ELAPSED TIME (HOURS)
 3.50
Task 286106-833-895-001: Replace
TOTAL MANHOURS
 0.50
ELAPSED TIME (HOURS)
 0.50
**CONF 002
Task 286106-832-895-001: Inspection
TOTAL MANHOURS
 11.25
ELAPSED TIME (HOURS)
 4.50
Task 286106-833-895-001: Replace
TOTAL MANHOURS
 0.50
ELAPSED TIME (HOURS)
 0.50
APPENDICES
**CONF ALL
Appendix 01: Inspection Findings - Reporting Sheet
Appendix 02: Manpower Gantt Chart
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 12

@A300-600
SERVICE BULLETIN
SUMMARY
**CONF 001
LH WING SHOWN
RH WING SIMILAR
RIB14
RIB2
Z550 (Z650)
TYPICAL
Z540 (Z640) FR47
FR46
C
C
C
C
C
A
B
B
A
 − Z141 Z142
D_SB_286106_7_SAAA_01_01
Figure A-USAAA - Sheet 01
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 13

@A300-600
SERVICE BULLETIN
SUMMARY
**CONF 002
B
PUMP 2
CANISTER
PUMP 1
CANISTER
LH WING SHOWN
RH WING SIMILAR
RIB14
RIB2
Z550 (Z650)
TYPICAL
Z540 (Z640)
A
FR47
FR46
A
 − Z141 Z142
B
D
D
D
D
D
319AB
319BZ
319BB
319AZ
D
D
C
Z319
C
D_SB_286106_7_SAAB_01_02
Figure A-USAAB - Sheet 01
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 5
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 14

@A300-600
SERVICE BULLETIN
SUMMARY
This Page Intentionally Left Blank
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 6
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 15

@A300-600
SERVICE BULLETIN
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 28
TITLE: FUEL - FUEL PUMP SYSTEM - INSPECTION OF THE FUEL PUMP
CANISTER HOOD
MODIFICATION No.: None
This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the
property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with
any information contained in it. It is delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall not be used for any purpose other than
that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall
not be duplicated in any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the conditions herein), without
AIRBUS prior written consent.
1. PLANNING INFORMATION
**CONF ALL
A. EFFECTIVITY
(1) Models
B4-603 B4-605R B4-622 B4-622R C4-605R/FC4-620 F4-605R F4-622R
(2) Effectivity by MSN
0344 0358 0361 0365 0380 0388 0401 0405 0408 0411 0414 0417 0477 0479 0505
0521 0525 0530
 0532 0536 0543 0546 0553 0555 0557-0559 0561 0563 0572 0575
0579 0581 0584 0602-0603
 0607-0608 0611 0613 0617-0618 0621 0623 0625-0626
0629-0630 0632-0633 0637 0641 0643 0657 0659 0664 0666 0668 0670 0673 0677
0679 0683 0688 0694 0696 0699 0701 0703 0707 0709 0711 0713 0715 0717 0719
0721-0730 0732-0746 0748-0750 0752-0764 0766
 0768-0775
 0777-0794 0797
0799-0840 0845-0878
(3) Effectivity by Operator
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting from transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 16

@A300-600
SERVICE BULLETIN
OPERATOR
 MSN
67Q
 0584 0603 0744 0749 0764
ABR
 0557
 0677
 0717
 0722
AHK
 0683
 0770
 0855 0856 0857 0858 0859 0860 0870 0871
BCS
 0602 0617 0621 0637 0641 0670 0679 0703 0711 0724 0729 0730
0737 0740 0743
 0753 0783 0797 0836 0837 0872
FDX
 0358 0361 0365 0388 0417 0477 0479 0530 0536 0543 0555 0559
0572 0575 0579 0581 0611 0613 0625 0630 0633 0657 0659 0664
0668 0688 0709 0713 0715 0726 0728 0735 0736 0738 0742 0745
0748 0752 0757 0759 0760 0761 0766 0768 0769 0771 0772 0774
0777 0778 0779 0780 0781 0789 0790 0791 0792 0793 0794 0799
0800 0801 0802 0803 0804 0873 0874 0875 0876 0877 0878
IRA
 0632 0696 0723 0727
IRM
 0380 0401 0405 0408 0411 0414 0546 0553 0608 0618 0623 0701
0773 0838
KAC
 0344 0673 0694 0699 0719 0721
MNB
 0521 0525 0734 0739 0755 0756 0758
MRJ
 0750 0762
MSR
 0561 0607
SOP
 0532
SUD
 0666 0775
TAR
 0505 0558 0563
THA
 0629 0782 0784 0785 0786 0787
UPS
 0805 0806 0807 0808 0809 0810 0811 0812 0813 0814 0815 0816
0817 0818 0819 0820 0821 0822 0823 0824 0825 0826 0827 0828
0829 0830 0831 0832 0833 0834 0835 0839 0840 0845 0846 0847
0848 0849 0850 0851 0852 0853 0854 0861 0862 0863 0864 0865
0866 0867 0868 0869
UQA
 0626
 0643
URS
 0733 0788
UTP
 0707
 0725
 0732
 0741
 0746
 0754
 0763
(4) Configuration by MSN
MSN
 CONFIGURATION
0344 0358 0361 0365 0380 0388 0401 0405 0408 0411 0414
0417 0546 0553 0618 0623
001
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 17

@A300-600
SERVICE BULLETIN
MSN
 CONFIGURATION
0477 0479 0505 0521 0525 0530 0532 0536 0543 0555 0557
0558 0559 0561 0563 0572 0575 0579 0581 0584 0602 0603
0607 0608 0611 0613 0617 0621 0625 0626 0629 0630 0632
0633 0637 0641 0643 0657 0659 0664 0666 0668 0670 0673
0677 0679 0683 0688 0694 0696 0699 0701 0703 0707 0709
0711 0713 0715 0717 0719 0721 0722 0723 0724 0725 0726
0727 0728 0729 0730 0732 0733 0734 0735 0736 0737 0738
0739 0740 0741 0742 0743 0744 0745 0746 0748 0749 0750
0752 0753 0754 0755 0756 0757 0758 0759 0760 0761 0762
0763 0764 0766 0768 0769 0770 0771 0772 0773 0774 0775
0777 0778 0779 0780 0781 0782 0783 0784 0785 0786 0787
0788 0789 0790 0791 0792 0793 0794 0797 0799 0800 0801
0802 0803 0804 0805 0806 0807 0808 0809 0810 0811 0812
0813 0814 0815 0816 0817 0818 0819 0820 0821 0822 0823
0824 0825 0826 0827 0828 0829 0830 0831 0832 0833 0834
0835 0836 0837 0838 0839 0840 0845 0846 0847 0848 0849
0850 0851 0852 0853 0854 0855 0856 0857 0858 0859 0860
0861 0862 0863 0864 0865 0866 0867 0868 0869 0870 0871
0872 0873 0874 0875 0876 0877 0878
002
(5) Configuration definition
NOTE
: This Service Bulletin is only applicable to aircraft that have Fuel Pump
Canister Hood PN 205481 (part of Fuel Pump Canister PN 2052C11
or PN 2052C12) or PN 3C93-129 (part of Fuel Pump Canister PN
C93R51-601) installed
**CONF 001
Config. 001 is applicable to all A300-600 aircraft - aircraft without a trim tank.
**CONF 002
Config. 002 is applicable to all A300-600R aircraft - aircraft with a trim tank.
(6) Material Effectivity
NOTE
: One BFEB01 or BFEB02 is required for each Fuel Pump Canister. The
total quantity of BFE kits will be determined by the result of the
inspection requirements of this Service Bulletin.
**CONF 001
MATERIAL
 QTY PER A/C
 SEE NOTES
Equipment BFEB01
 1
Equipment BFEB02
 1
Consumable CMLB01
 1
**CONF 002
MATERIAL
 QTY PER A/C
 SEE NOTES
Equipment BFEB01
 1
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 18

@A300-600
SERVICE BULLETIN
MATERIAL
 QTY PER A/C
 SEE NOTES
Equipment BFEB02
 1
Consumable CMLB01
 1
**CONF ALL
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
Some operators have reported cases of cracking on the hood of the inboard and
outboard fuel pump canisters located in the inner fuel tanks and the hoods of the center
tank canisters. More recently, cracking has also been reported on the inlet hoods of the
outer tank pumps.
The hood is part of the fuel pump canister and forms a surface between the pump inlet
mesh and the canister body. The hood is fabricated from thin aluminium alloy in two
halves.
On one aircraft the detached parts were reported as consisting of two separate pieces.
One annular section was subsequently found in the fuel tank.
(2) Objective/Action
This Inspection Service Bulletin (ISB) introduces a repetitive Detailed Inspection (DI) of
all fuel pump locations (center, wing inner, wing outer and trim tank). The inspection will
also assess which locations are subject to such cracking, and which hoods must be
replaced. The Inspection must be done not more than 30 months after the issue date of
this Service Bulletin and repeated every 30 months.
Replacement of failed hood halves will prevent possible contamination issues and
establish which locations are subject to cracking. Replace both hood halves if cracks are
found in one of the two halves. You must find and remove all broken pieces from the
fuel tanks.
Operators that have not yet performed this inspection on their aircraft in accordance with
this Service Bulletin, (at any revision) are required to provide feedback to AIRBUS
following their first accomplishment of this Service Bulletin. There is no feedback
requirement for aircraft inspected under the repeat inspection requirements of this
Service Bulletin.
(3) Advantages
Accomplishment of Service Bulletin No. A300-28-6110 is the terminating action for the
repeat inspection of the center and inner wing tank pump inspection requirements of this
Service Bulletin.
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 19

@A300-600
SERVICE BULLETIN
Accomplishment of Service Bulletin No. A300-28-6114 is the terminating action for the
repeat inspection of the trim tank and outer wing tank pump inspection requirements of
this Service Bulletin.
(4) Operational/Maintenance Consequences
The Operational/Maintenance Consequences of this Service Bulletin are covered by the
update of the affected publications detailed in "PLANNING INFORMATION".
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to :
**CONF 001
Task 286106-832-895-001: Inspection
(1) Inspection of the Wing Tanks (Inner) Pump Canister Hood Halves
(2) Inspection of the Wing Tanks (Outer) Pump Canister Hood Halves
(3) Inspection of the Center Tank Pump Canister Hood Halves
Task 286106-833-895-001: Replace
(1) Replace the Fuel Pump Canister Hood Halves
**CONF 002
Task 286106-832-895-001: Inspection
(1) Inspection of the Wing Tanks (Inner) Pump Canister Hood Halves
(2) Inspection of the Wing Tanks (Outer) Pump Canister Hood Halves
(3) Inspection of the Center Tank Pump Canister Hood Halves
(4) Inspection of the Trim Tank Transfer Pump Canister Hood Halves
Task 286106-833-895-001: Replace
(1) Replace the Fuel Pump Canister Hood Halves
**CONF ALL
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 5
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 20

@A300-600
SERVICE BULLETIN
(2) Accomplishment Timescale
**CONF 001
COMPLIANCE TIME
CONDITION
 ACTION
THRESHOLD
 GRACE PERIOD
REPETITIVE
INTERVAL (NOT
TO EXCEED)
All Config. 001
aircraft that HAVE
embodied Service
Bulletin No.
A300-28-6110
(Modification No.
13644H5743 and
13739H5755) and
HAVE embodied
Service Bulletin
No. A300-28-6114
(Modification No.
13643H5740 and
13740H5756)
No Further Action
 None
 None
 None
All Config. 001
aircraft that HAVE
embodied Service
Bulletin No.
A300-28-6110
(Modification No.
13644H5743 and
13739H5755) and
have NOT
embodied Service
Bulletin No.
A300-28-6114
(Modification No.
13643H5740 and
13740H5756)
Inspect outer wing
tank pumps in
accordance with
SUBTASK
286106-832-403 001
Inspection of the
Wing Tanks (Outer)
Pump Canister Hood
Halves
30 months
 30 months
 30 months
All Config. 001
aircraft that HAVE
embodied Service
Bulletin No.
A300-28-6114
(Modification No.
13643H5740 and
13740H5756) and
that have NOT
embodied Service
Bulletin No.
A300-28-6110
(Modification No.
13644H5743 and
13739H5755)
Inspect inner and
center wing tank
pumps in accordance
with SUBTASK
286106-832-401 001
Inspection of the
Wing Tanks (Inner)
Pump Canister Hood
Halves
 and
SUBTASK
286106-832-402 001
Inspection of the
Center Tank Pump
Canister Hood Halves
30 months
 None
 30 months
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 6
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 21

@A300-600
SERVICE BULLETIN
COMPLIANCE TIME
CONDITION
 ACTION
THRESHOLD
 GRACE PERIOD
REPETITIVE
INTERVAL (NOT
TO EXCEED)
All Config. 001
aircraft that have
NOT embodied
Service Bulletin
No. A300-28-6110
(Modification No.
13644H5743 and
13739H5755) and
have NOT
embodied Service
Bulletin No.
A300-28-6114
(Modification No.
13643H5740 and
13740H5756)
Inspect inner, center
and outer wing tank
pumps and outer wing
tank pumps in
accordance with
SUBTASK
286106-832-401 001
Inspection of the
Wing Tanks (Inner)
Pump Canister Hood
Halves
 , SUBTASK
286106-832-403 001
Inspection of the
Wing Tanks (Outer)
Pump Canister Hood
Halves
 and
SUBTASK
286106-832-402 001
Inspection of the
Center Tank Pump
Canister Hood Halves
30 months
 30 months for
outer wing tank
pumps
30 months
This Service Bulletin has been classified Mandatory by the issue of an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA). The AD must
be used as the reference document for the mandated accomplishment timescale.
**CONF 002
COMPLIANCE TIME
CONDITION
 ACTION
THRESHOLD
 GRACE PERIOD
REPETITIVE
INTERVAL (NOT
TO EXCEED)
All Config. 002
aircraft that HAVE
embodied Service
Bulletin No.
A300-28-6110
(Modification No.
13644H5743 and
13739H5755) and
HAVE embodied
Service Bulletin
No. A300-28-6114
(Modification No.
13643H5740 and
13740H5756)
No Further Action
 None
 None
 None
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 7
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 22

@A300-600
SERVICE BULLETIN
COMPLIANCE TIME
CONDITION
 ACTION
THRESHOLD
 GRACE PERIOD
REPETITIVE
INTERVAL (NOT
TO EXCEED)
All Config. 002
aircraft that HAVE
embodied Service
Bulletin No.
A300-28-6110
(Modification No.
13644H5743 and
13739H5755) and
have NOT
embodied Service
Bulletin No.
A300-28-6114
(Modification No.
13643H5740 and
13740H5756)
Inspect outer wing
and trim tank pumps
in accordance with
SUBTASK
286106-832-403 001
Inspection of the
Wing Tanks (Outer)
Pump Canister Hood
Halves
 and
SUBTASK
286106-832-404 002
Inspection of the Trim
Tank Transfer Pump
Canister Hood Halves
30 months
 30 months
 30 months
All Config. 002
aircraft that HAVE
embodied Service
Bulletin No.
A300-28-6114
(Modification No.
13643H5740 and
13740H5756) and
that have NOT
embodied Service
Bulletin No.
A300-28-6110
(Modification No.
13644H5743 and
13739H5755)
Inspect inner and
center wing tank
pumps in accordance
with SUBTASK
286106-832-401 001
Inspection of the
Wing Tanks (Inner)
Pump Canister Hood
Halves
 and
SUBTASK
286106-832-402 001
Inspection of the
Center Tank Pump
Canister Hood Halves
30 months
 None
 30 months
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 8
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 23

@A300-600
SERVICE BULLETIN
COMPLIANCE TIME
CONDITION
 ACTION
THRESHOLD
 GRACE PERIOD
REPETITIVE
INTERVAL (NOT
TO EXCEED)
All Config. 002
aircraft that have
NOT embodied
Service Bulletin
No. A300-28-6110
(Modification No.
13644H5743 and
13739H5755) and
have NOT
embodied Service
Bulletin No.
A300-28-6114
(Modification No.
13643H5740 and
13740H5756)
Inspect inner, center
and outer wing tank
pumps and trim tank
pumps in accordance
with SUBTASK
286106-832-401 001
Inspection of the
Wing Tanks (Inner)
Pump Canister Hood
Halves
 , SUBTASK
286106-832-403 001
Inspection of the
Wing Tanks (Outer)
Pump Canister Hood
Halves
 , SUBTASK
286106-832-402 001
Inspection of the
Center Tank Pump
Canister Hood Halves
and SUBTASK
286106-832-404 002
Inspection of the Trim
Tank Transfer Pump
Canister Hood Halves
30 months
 30 months for
outer wing and
trim tank pumps
30 months
This Service Bulletin has been classified Mandatory by the issue of an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA). The AD must
be used as the reference document for the mandated accomplishment timescale.
**CONF ALL
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organisation Approval No. EASA.21J.031.
If an aircraft listed in the effectivity has a modification or repair embodied that is not of
AIRBUS origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also not
included.
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 9
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 24

@A300-600
SERVICE BULLETIN
**CONF 001
Task 286106-832-895-001: Inspection
Get Access
 0.25
On Aircraft
Inspection of the Wing Tanks (Inner) Pump Canister
Hood Halves
2.50
Inspection of the Wing Tanks (Outer) Pump Canister
Hood Halves
2.50
Inspection of the Center Tank Pump Canister Hood
Halves
1.50
Tests
 0.00
Close-Up
 2.00
TOTAL MANHOURS
 8.75
ELAPSED TIME (HOURS)
 3.50
NOTE
: For an explanation of the manhours and elapsed time, refer to the Manpower
Gantt Chart,
 Fig. A-UABAA
 given in Appendix 02: Manpower Gantt Chart
 .
Task 286106-833-895-001: Replace
Get Access
 0.00
On Aircraft
Replace the Fuel Pump Canister Hood Halves
 0.50
Tests
 0.00
Close-Up
 0.00
TOTAL MANHOURS
 0.50
ELAPSED TIME (HOURS)
 0.50
**CONF 002
Task 286106-832-895-001: Inspection
Get Access
 0.25
On Aircraft
Inspection of the Wing Tanks (Inner) Pump Canister
Hood Halves
2.50
Inspection of the Wing Tanks (Outer) Pump Canister
Hood Halves
2.50
Inspection of the Center Tank Pump Canister Hood
Halves
1.50
Inspection of the Trim Tank Transfer Pump Canister
Hood Halves
1.50
Tests
 0.00
Close-Up
 3.00
TOTAL MANHOURS
 11.25
ELAPSED TIME (HOURS)
 4.50
NOTE
: For an explanation of the manhours and elapsed time, refer to the Manpower
Gantt Chart,
 Fig. A-UABAB
 given in Appendix 02: Manpower Gantt Chart
 .
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 10
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 25

@A300-600
SERVICE BULLETIN
Task 286106-833-895-001: Replace
Get Access
 0.00
On Aircraft
Replace the Fuel Pump Canister Hood Halves
 0.50
Tests
 0.00
Close-Up
 0.00
TOTAL MANHOURS
 0.50
ELAPSED TIME (HOURS)
 0.50
**CONF ALL
H. WEIGHT AND BALANCE
Not Changed
I. ELECTRICAL LOAD DATA
Not Changed
J. REFERENCES
**CONF 001
Aircraft Maintenance Manual (AMM)
 06-21-00 06-41-53 06-41-57
28-00-00 28-10-00 28-11-22
28-11-29 28-25-00
Consumable Material List (CML)
Elec. Std. Practices Manual (ESPM)
 20-55-00
Service Bulletin (SB)
 A300-28-6110
A300-28-6114
**CONF 002
Aircraft Maintenance Manual (AMM)
 06-21-00 06-41-53 06-41-57
28-00-00 28-10-00 28-11-22
28-11-29 28-25-00 28-27-12
Consumable Material List (CML)
Elec. Std. Practices Manual (ESPM)
 20-55-00
Service Bulletin (SB)
 A300-28-6110
A300-28-6114
**CONF ALL
K. PUBLICATION AFFECTED
Maintenance Planning Document (MPD)
 282100-05-1
282100-06-1
282100-06-2
L. INTERCHANGEABILITY/MIXABILITY
Not Applicable
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 11
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 26

@A300-600
SERVICE BULLETIN
M. SPARES
None
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 12
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 27

@A300-600
SERVICE BULLETIN
2. MATERIAL INFORMATION
**CONF ALL
A. MATERIAL - PRICE AND AVAILABILITY
(1) Procurement Addresses
Vendor parts are to be procured from:
Equipment BFEB01
Equipment BFEB02
ZODIAC AEROSPACE
61 Rue Pierre Curie
78373 Plaisir Cedex
FRANCE
(2) Price and Availability
Procurement terms for the equipment must be negotiated with the equipment supplier.
(MATERIAL INFORMATION).
B. INDUSTRY SUPPORT INFORMATION
Refer to the paragraph: ’Price and Availability’.
C. LIST OF COMPONENTS
No Kit
D. LIST OF MATERIALS - OPERATOR SUPPLIED
(1) Consumable Materials
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO CML
MAT. No.
QTY PER A/C
 SEE
NOTES
Non Aqueous Cleaner - Acetone
 08BBH1
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
(2) Components
None
(3) Equipment
Equipment BFEB01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 ITEM
 OLD PART N˚
 INT
 SEE
NOTES
1
 205481
 2
 HOODHALF
 (1)
 205481
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 13
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 28

@A300-600
SERVICE BULLETIN
NOTE
: One BFEB01 is required for each Fuel Pump Canister. The total
quantity of BFE kits will be determined by the result of the inspection
requirements of this Service Bulletin.
Canister Hood PN 205481 for Fuel Pump Canister PN 2052C11 or PN
2052C12.
NOTE
: For Center and Inner tank pumps, the installation of improved canister
hoods are recommended through accomplishment of Service Bulletin No.
A300-28-6110.
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
NOTE
: Trim (if fitted) and Outer fuel tank pumps, the installation of improved
canister hoods are recommended through accomplishment of Service
Bulletin No. A300-28-6114.
Equipment BFEB02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 ITEM
 OLD PART N˚
 INT
 SEE
NOTES
4
 3C93-129
 2
 HOODHALF
 (4)
 3C93-129
NOTE
: One BFEB02 is required for each Fuel Pump Canister. The total
quantity of BFE kits will be determined by the result of the inspection
requirements of this Service Bulletin.
Canister Hood PN 3C93-129 for Fuel Pump Canister PN C93R51-601.
NOTE
: For Center and Inner tank pumps, the installation of improved canister
hoods are recommended through accomplishment of Service Bulletin No.
A300-28-6110.
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
NOTE
: Trim (if fitted) and Outer fuel tank pumps, the installation of improved
canister hoods are recommended through accomplishment of Service
Bulletin No. A300-28-6114.
E. PARTS TO BE RE-IDENTIFIED BY OPERATOR
None
F. TOOLING
None
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 14
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 29

@A300-600
SERVICE BULLETIN
3. ACCOMPLISHMENT INSTRUCTIONS
Task 286106-832-895-001 - Inspection
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
WARNING
: THIS PROCEDURE USES A FUEL SYSTEM ITEM THAT IS IN A CATEGORY
KNOWN AS A CRITICAL DESIGN CONFIGURATION CONTROL LIMITATION
(CDCCL) CDCCL IDENTIFIES AN ITEM THAT CAN BE THE SOURCE OF A
POSSIBLE FUEL TANK IGNITION. YOU MUST KEEP ALL CDCCL ITEMS IN
THE APPROVED CONFIGURATION. DAMAGE, WEAR OR CHANGES TO A
CDCCL ITEM CAN CAUSE A POSSIBLE FUEL TANK EXPLOSION.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC. AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.
NOTE
: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
’refer to’ are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words ’in
accordance with’ are used then the given procedure must be followed.
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE
: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE
: This Service Bulletin is classified mandatory or expected to be classified mandatory
by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.D. in these
accomplishment instructions are Required for Compliance (RC) and must be done
to comply with the AD. Other paragraphs are recommended and may be deviated
from, done as part of other actions or done with accepted methods different from
those given in the Service Bulletin, as long as the RC paragraphs can be done and
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 15
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 30

@A300-600
SERVICE BULLETIN
the aircraft can be put back into a serviceable condition.
NOTE
: The purpose of flowcharts is to supplement the information given in the Procedure
and Compliance paragraphs and not to serve as the primary source for tasks or
compliance times given in this Service Bulletin.
NOTE
: This Service Bulletin contains the instructions for the on-aircraft maintenance
necessary to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions contained herein, contact AIRBUS for further
instructions and approval.
Task Associated Data
**CONF 001
Zone
141 142 540 550 640 650
Modified FIN
280014 280015 280016 280017 280018 280019 280020 280021 280022 280023
Access
Panel
 147AZ
 148AZ
 542CB
 550BB
 642CB
 650BB
Manpower
TOTAL MANHOURS
 8.75
ELAPSED TIME (HOURS)
 3.50
**CONF 002
Zone
141 142 311 312 540 550 640 650
Modified FIN
280014 280015 280016 280017 280018 280019 280020 280021 280022 280023
280432 280433
Access
Panel
 147AZ
 148AZ
 319AZ
 319BZ
 542CB
 550BB
 642CB
 650BB
Manpower
TOTAL MANHOURS
 11.25
ELAPSED TIME (HOURS)
 4.50
**CONF ALL
A. GENERAL
**CONF 001
(1) Subtask 286106-910-401-001 - Standard Practices
Manpower Resources
Skills
 AIRFRAME
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 16
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 31

@A300-600
SERVICE BULLETIN
References
Aircraft Maintenance Manual (AMM)
 06-21-00, Page Block 001
06-41-53, Page Block 001
06-41-57, Page Block 001
28-00-00, Page Block 301
28-10-00, Page Block 301
Consumable Material List (CML)
(a) For the specification of materials (Mat. No.) that you must use in this Service
Bulletin refer to Consumable Materials List (CML).
(b) For the identification of Access Panels, refer to AMM 06-41-53, Page Block 001
and AMM 06-41-57, Page Block 001.
(c) For the identification of zones, refer to AMM 06-21-00, Page Block 001.
(d) Obey the safety procedures when you do work in a fuel tank, refer to AMM
28-10-00, Page Block 301 and AMM 28-00-00, Page Block 301.
(2) Subtask 286106-839-401-001 - Administrative
Manpower Resources
Skills
 AIRFRAME
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 002
(1) Subtask 286106-910-401-001 - Standard Practices
Manpower Resources
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 06-21-00, Page Block 001
06-41-53, Page Block 001
06-41-57, Page Block 001
28-00-00, Page Block 301
28-10-00, Page Block 301
Consumable Material List (CML)
(a) For the specification of materials (Mat. No.) that you must use in this Service
Bulletin refer to Consumable Materials List (CML).
(b) For the identification of Access Panels, refer to AMM 06-41-53, Page Block 001
and AMM 06-41-57, Page Block 001.
(c) For the identification of zones, refer to AMM 06-21-00, Page Block 001.
(d) Obey the safety procedures when you do work in a fuel tank, refer to AMM
28-10-00, Page Block 301 and AMM 28-00-00, Page Block 301.
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 17
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 32

@A300-600
SERVICE BULLETIN
(2) Subtask 286106-839-401-001 - Administrative
Manpower Resources
Skills
 AIRFRAME
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF ALL
B. PREPARATION
**CONF 001
(1) Subtask 286106-941-401-001 - Job Set-up
Manpower Resources
Skills
 NON SPECIFIC
References
Service Bulletin (SB)
 A300-28-6110
A300-28-6114
NOTE
: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
- Job Set-up Administrative
Aircraft on the ground resting on landing gear (the ground safety
locks and the wheel chocks are in position on the landing gear)
- Engine shut down, thrust reversers closed and locked
- Aircraft in clean configuration
- Parking brake applied
- Aircraft electrical network de-energized
- Hydraulic system s depressurized
- Access to the cockpit and cabin is available
- All circuit breakers are in closed position
- All controls in NORM, AUTO or OFF position.
(a) Do a check of aircraft records for embodiment of Service Bulletin Nos.
A300-28-6110 and A300-28-6114
:
- If Service Bulletin Nos. A300-28-6110 and A300-28-6114 have been embodied,
go to SUBTASK 286106-942-401 001 Close-up
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 18
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 33

@A300-600
SERVICE BULLETIN
- If only Service Bulletin No. A300-28-6110 has been embodied, go to SUBTASK
286106-832-403 001 Inspection of the Wing Tanks (Outer) Pump Canister
Hood Halves
- If only Service Bulletin No. A300-28-6114 has been embodied, go to SUBTASK
286106-832-401 001 Inspection of the Wing Tanks (Inner) Pump Canister
Hood Halves
 and SUBTASK 286106-832-402 001 Inspection of the Center
Tank Pump Canister Hood Halves
- If Service Bulletin Nos. A300-28-6110 and A300-28-6114 have not been
accomplished, go to SUBTASK 286106-832-401 001 Inspection of the Wing
Tanks (Inner) Pump Canister Hood Halves
 , SUBTASK 286106-832-402 001
Inspection of the Center Tank Pump Canister Hood Halves
 and SUBTASK
286106-832-403 001 Inspection of the Wing Tanks (Outer) Pump Canister
Hood Halves
 .
**CONF 002
(1) Subtask 286106-941-401-004 - Job Set-up
Manpower Resources
Skills
 NON SPECIFIC
References
Service Bulletin (SB)
 A300-28-6110
A300-28-6114
(a) Do a check of aircraft records for embodiment of Service Bulletin Nos.
A300-28-6110 and A300-28-6114:
- If Service Bulletin Nos. A300-28-6110 and A300-28-6114 have been embodied,
go to SUBTASK 286106-942-401 001 Close-up
- If only Service Bulletin No. A300-28-6110 has been embodied, go to SUBTASK
286106-832-403 001 Inspection of the Wing Tanks (Outer) Pump Canister
Hood Halves
 and SUBTASK 286106-832-404 002 Inspection of the Trim Tank
Transfer Pump Canister Hood Halves
- If only Service Bulletin No. A300-28-6114 has been embodied, go to SUBTASK
286106-832-401 001 Inspection of the Wing Tanks (Inner) Pump Canister
Hood Halves
 and SUBTASK 286106-832-402 001 Inspection of the Center
Tank Pump Canister Hood Halves
- If Service Bulletin Nos. A300-28-6110 and A300-28-6114 have not been
accomplished, go to SUBTASK 286106-832-401 001 Inspection of the Wing
Tanks (Inner) Pump Canister Hood Halves
 , SUBTASK 286106-832-402 001
Inspection of the Center Tank Pump Canister Hood Halves
 , SUBTASK
286106-832-403 001 Inspection of the Wing Tanks (Outer) Pump Canister
Hood Halves
 and SUBTASK 286106-832-404 002 Inspection of the Trim Tank
Transfer Pump Canister Hood Halves
 .
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 19
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 34

@A300-600
SERVICE BULLETIN
**CONF ALL
C. PROCEDURE
NOTE
: Operators can have the Fuel Pump Canister Hood PN 205481 (part of Fuel
Pump Canister PN 2052C11 or PN 2052C12) or PN 3C93-129 (part of Fuel
Pump Canister PN C93R51-601) installed.
**CONF 001
(1) Subtask 286106-832-401-001 - Inspection of the Wing Tanks (Inner) Pump Canister
Hood Halves
Work Zones and Access Panels
Zone
 Access/Work location
540
 Access
 Panel 542CB
640
 Access
 Panel 642CB
Manpower Resources
Manhours
 2.50
Minimum number of person
 2
Subtask elapsed time
 1.25
Skills
 AIRFRAME
Material necessary to do the job
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Non Aqueous Cleaner -
Acetone
08BBH1
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
References
Aircraft Maintenance Manual (AMM)
 06-21-00, Page Block 001
28-10-00, Page Block 301
28-11-22, Page Block 401
28-25-00, Page Block 301
Service Bulletin (SB)
 A300-28-6110
Fig. A-UAAAA
Inspection Flowchart
Sheet 01
Fig. A-UBAAA
Fuel Pump Canister Hood Halves
Inspection - Wing Tanks
Sheet 01
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 20
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 35

@A300-600
SERVICE BULLETIN
WARNING
: YOU MUST OBEY ALL THE SAFETY PROCEDURES WHEN YOU DO
WORK IN OR NEAR A FUEL TANK. IF YOU DO NOT OBEY THE
SAFETY PROCEDURES, THERE IS A RISK OF:
- DEATH OR INJURY TO PERSONS
- DAMAGE TO THE AIRCRAFT OR TO OTHER EQUIPMENT.
(a) Defuel all of the aircraft fuel tanks, refer to AMM 28-25-00, Page Block 301
 .
(b) Prepare the aircraft as specified in AMM Task ’STORAGE - SERVICING (Fuel
Tank Draining, Venting and Entry)’, refer to AMM 28-10-00, Page Block 301
 .
1
 Before you go into a fuel tank you must complete the Pre-Entry Checklist,
refer to AMM 28-10-00, Page Block 301
 .
(c) Put platforms in position to get access to the inner wing tanks - Zones 540 LH (640
RH), refer to AMM 06-21-00, Page Block 001
 .
(d) Remove the inner wing tank manhole covers 542CB LH (642CB RH), refer to AMM
28-11-22, Page Block 401
 .
(e) Inspect the Inner Wing Tank Pump Canister Hood Halves:
1
 Clean the
2 Hood Half 205481 Item (1)
with a
Textile-Lint Free
Cotton
14SBA1
 As required
made moist with
Non Aqueous
Cleaner - Acetone
08BBH1
 As required
2
 Do a Detailed Inspection (DI) of the fuel pump canister hood halves in the
wing tanks:
- Wing tank (LH) - inboard FIN 280014 and FIN 280016.
- Wing tank (RH) - inboard FIN 280015 and FIN 280017.
Refer to Fig. A-UAAAA Sheet 01
 and Fig. A-UBAAA Sheet 01
 .
a
 No cracks found in
2 Hood Half 205481 Item (1)
Make a record of the results, refer to Appendix 01: Inspection Findings -
Reporting Sheet .
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 21
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 36

@A300-600
SERVICE BULLETIN
b
 Cracks are found in
2 Hood Half 205481 Item (1)
Replace the Hood Halves.
Refer to TASK 286106-833-895 001 Replace .
NOTE
: Accomplishment of Service Bulletins No.
 A300-28-6110
cancels the repetitive inspection requirements of this
Service Bulletin for the inner tank fuel pumps.
3
 Make sure that all broken parts and unwanted materials are removed from the
related tank.
4
 Make a record of the results, refer to Appendix 01: Inspection Findings -
Reporting Sheet .
(f) Send a record of the inspection results to AIRBUS, refer to Appendix 01: Inspection
Findings - Reporting Sheet .
(2) Subtask 286106-832-403-001 - Inspection of the Wing Tanks (Outer) Pump Canister
Hood Halves
Work Zones and Access Panels
Zone
 Access/Work location
550
 Access
 Panel 550BB
650
 Access
 Panel 650BB
Manpower Resources
Manhours
 2.50
Minimum number of person
 2
Subtask elapsed time
 1.25
Skills
 AIRFRAME
Material necessary to do the job
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Non Aqueous Cleaner -
Acetone
08BBH1
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
References
Aircraft Maintenance Manual (AMM)
 06-21-00, Page Block 001
28-10-00, Page Block 301
28-11-22, Page Block 401
28-25-00, Page Block 301
Service Bulletin (SB)
 A300-28-6114
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 22
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 37

@A300-600
SERVICE BULLETIN
References
Fig. A-UAAAA
Inspection Flowchart
Sheet
 01
Fig. A-UBAAA
Fuel Pump Canister Hood Halves
Inspection - Wing Tanks
Sheet
 01
WARNING
: YOU MUST OBEY ALL THE SAFETY PROCEDURES WHEN YOU DO
WORK IN OR NEAR A FUEL TANK. IF YOU DO NOT OBEY THE
SAFETY PROCEDURES, THERE IS A RISK OF:
- DEATH OR INJURY TO PERSONS
- DAMAGE TO THE AIRCRAFT OR TO OTHER EQUIPMENT.
(a) Defuel all of the aircraft fuel tanks, refer to AMM 28-25-00, Page Block 301.
(b) Prepare the aircraft as specified in AMM Task ’STORAGE - SERVICING (Fuel
Tank Draining, Venting and Entry)’, refer to AMM 28-10-00, Page Block 301.
1
 Before you go into a fuel tank you must complete the Pre-Entry Checklist,
refer to AMM 28-10-00, Page Block 301.
(c) Put platforms in position to get access to outer wing tanks - zones 550 LH (650
RH), refer to AMM 06-21-00, Page Block 001.
(d) Remove the outer wing tanks manhole covers 550BB LH (650BB RH), refer to
AMM 28-11-22, Page Block 401.
(e) Inspect the Outer Wing Tank Pump Canister Hood Halves:
1
 Clean the
2
 Hood Half
 205481
 Item (1
)
with a
Textile-Lint Free
Cotton
14SBA1
 As required
made moist with
Non Aqueous
Cleaner - Acetone
08BBH1
 As required
2
 Do a Detailed Inspection (DI) of the fuel pump canister hood halves in the
wing tanks:
- Wing tank (LH) - outboard FIN
 280018 and FIN
 280020.
- Wing tank (RH) - outboard FIN
 280019 and FIN
 280021.
Refer to Fig. A-UAAAA Sheet 01
 and Fig. A-UBAAA Sheet 01
 .
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 23
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 38

@A300-600
SERVICE BULLETIN
a
 No cracks found in
2
 Hood Half
 205481
 Item (1
)
Make a record of the results, refer to Appendix 01: Inspection Findings -
Reporting Sheet
 .
b
 Cracks are found in
2
 Hood Half
 205481
 Item (1
)
Replace the Hood Halves.
Refer to TASK 286106-833-895 001 Replace
 .
NOTE
: Accomplishment of Service Bulletins No. A300-28-6114
cancels the repetitive inspection requirements of this
Service Bulletin for the outer tank fuel pumps.
3
 Make sure that all broken parts and unwanted materials are removed from the
related tank.
4
 Make a record of the results, refer to Appendix 01: Inspection Findings -
Reporting Sheet
 .
(f) Send a record of the inspection results to AIRBUS, refer to Appendix 01: Inspection
Findings - Reporting Sheet
 .
(3) Subtask 286106-832-402-001 - Inspection of the Center Tank Pump Canister Hood
Halves
Work Zones and Access Panels
Zone
 Access/Work location
141
 Access
 Panel 147AZ
142
 Access
 Panel 148AZ
Manpower Resources
Manhours
 1.50
Minimum number of person
 2
Subtask elapsed time
 0.75
Skills
 AIRFRAME
Material necessary to do the job
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Non Aqueous Cleaner -
Acetone
08BBH1
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 24
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 39

@A300-600
SERVICE BULLETIN
References
Aircraft Maintenance Manual (AMM)
 06-21-00, Page Block 001
28-10-00, Page Block 301
28-11-29, Page Block 401
28-25-00, Page Block 301
Service Bulletin (SB)
 A300-28-6110
Fig. A-UBCAA
Fuel Pump Canister Hood Halves
Inspection - Center Tank
Sheet 01
Fig. A-UAAAA
Inspection Flowchart
Sheet 01
Fig. A-UCAAA
Replace the Fuel Pump Canister Hood
Halves - Typical
Sheet 01
WARNING
: YOU MUST OBEY ALL THE SAFETY PROCEDURES WHEN YOU DO
WORK IN OR NEAR A FUEL TANK. IF YOU DO NOT OBEY THE
SAFETY PROCEDURES, THERE IS A RISK OF:
- DEATH OR INJURY TO PERSONS
- DAMAGE TO THE AIRCRAFT OR TO OTHER EQUIPMENT.
(a) Defuel all of the aircraft fuel tanks, refer to AMM 28-25-00, Page Block 301.
(b) Prepare the aircraft as specified in AMM Task ’STORAGE - SERVICING (Fuel
Tank Draining, Venting and Entry)’, refer to AMM 28-10-00, Page Block 301.
1
 Before you go into a fuel tank you must complete the Pre-Entry Checklist,
refer to AMM 28-10-00, Page Block 301.
(c) Put platforms in position to get access to the center tank - zones 141 and 142,
refer to AMM 06-21-00, Page Block 001.
(d) Remove the center tank manhole covers 147AZ LH and 148AZ RH, refer to AMM
28-11-29, Page Block 401.
(e) Inspect the Center Tank Pump Canister Hood Halves:
1
 Clean the
2 Hood Half 3C93-129 Item (4)
with a
Textile-Lint Free
Cotton
14SBA1
 As required
made moist with
Non Aqueous
Cleaner - Acetone
08BBH1
 As required
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 25
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 40

@A300-600
SERVICE BULLETIN
2
 Do a Detailed Inspection (DI) to the fuel pump canister hood halves in the
center tank - LH FIN
 280022 and RH FIN 280023
Refer to Fig. A-UAAAA Sheet 01
 and Fig. A-UBCAA Sheet 01
 .
a
 No cracks found in
2 Hood Half 3C93-129 Item (4)
Make a record of the results, refer to Appendix 01: Inspection Findings -
Reporting Sheet .
b
 Cracks are found in
2 Hood Half 3C93-129 Item (4)
Replace the Hood Halves.
Refer to TASK 286106-833-895 001 Replace
.
NOTE
: Accomplishment of Service Bulletins Nos.
 A300-28-6110
cancels the repetitive inspection requirements of this
Service Bulletin for the center tank fuel pumps.
3
 Make sure that all broken parts and unwanted materials are removed from the
related tank.
4
 Make a record of the results, refer to Appendix 01: Inspection Findings -
Reporting Sheet .
(f) Send a record of the inspection results to AIRBUS, refer to Appendix 01: Inspection
Findings - Reporting Sheet .
**CONF 002
(1) Subtask 286106-832-401-001 - Inspection of the Wing Tanks (Inner) Pump Canister
Hood Halves
Work Zones and Access Panels
Zone
 Access/Work location
540
 Access
 Panel 542CB
640
 Access
 Panel 642CB
Manpower Resources
Manhours
 2.50
Minimum number of person
 2
Subtask elapsed time
 1.25
Skills
 AIRFRAME
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 26
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 41

@A300-600
SERVICE BULLETIN
Material necessary to do the job
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Non Aqueous Cleaner -
Acetone
08BBH1
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
References
Aircraft Maintenance Manual (AMM)
 06-21-00, Page Block 001
28-10-00, Page Block 301
28-11-22, Page Block 401
28-25-00, Page Block 301
Service Bulletin (SB)
 A300-28-6110
Fig. A-UAAAB
Inspection Flowchart
Sheet
 01
Fig. A-UBAAA
Fuel Pump Canister Hood Halves
Inspection - Wing Tanks
Sheet 01
WARNING
: YOU MUST OBEY ALL THE SAFETY PROCEDURES WHEN YOU DO
WORK IN OR NEAR A FUEL TANK. IF YOU DO NOT OBEY THE
SAFETY PROCEDURES, THERE IS A RISK OF:
- DEATH OR INJURY TO PERSONS
- DAMAGE TO THE AIRCRAFT OR TO OTHER EQUIPMENT.
(a) Defuel all of the aircraft fuel tanks, refer to AMM 28-25-00, Page Block 301
 .
(b) Prepare the aircraft as specified in AMM Task ’STORAGE - SERVICING (Fuel
Tank Draining, Venting and Entry)’, refer to AMM 28-10-00, Page Block 301
 .
1
 Before you go into a fuel tank you must complete the Pre-Entry Checklist,
refer to AMM 28-10-00, Page Block 301
 .
(c) Put platforms in position to get access to the inner wing tanks - Zones 540 LH (640
RH), refer to AMM 06-21-00, Page Block 001
 .
(d) Remove the inner wing tank manhole covers 542CB LH (642CB RH), refer to AMM
28-11-22, Page Block 401
 .
(e) Inspect the Inner Wing Tank Pump Canister Hood Halves:
1
 Clean the
2 Hood Half 205481 Item (1)
with a
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 27
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 42

@A300-600
SERVICE BULLETIN
Textile-Lint Free
Cotton
14SBA1
 As required
made moist with
Non Aqueous
Cleaner - Acetone
08BBH1
 As required
2
 Do a Detailed Inspection (DI) of the fuel pump canister hood halves in the
wing tanks:
- Wing tank (LH) - inboard FIN 280014 and FIN 280016.
- Wing tank (RH) - inboard FIN 280015 and FIN 280017.
Refer to and Fig. A-UBAAA Sheet 01
 .
a
 No cracks found in
2 Hood Half 205481 Item (1)
Make a record of the results, refer to Appendix 01: Inspection Findings -
Reporting Sheet .
b
 Cracks are found in
2 Hood Half 205481 Item (1)
Replace the Hood Halves.
Refer to TASK 286106-833-895 001 Replace .
NOTE
: Accomplishment of Service Bulletins No.
 A300-28-6110
cancels the repetitive inspection requirements of this
Service Bulletin for the inner tank fuel pumps.
3
 Make sure that all broken parts and unwanted materials are removed from the
related tank.
4
 Make a record of the results, refer to Appendix 01: Inspection Findings -
Reporting Sheet .
(f) Send a record of the inspection results to AIRBUS, refer to Appendix 01: Inspection
Findings - Reporting Sheet .
(2) Subtask 286106-832-403-001 - Inspection of the Wing Tanks (Outer) Pump Canister
Hood Halves
Work Zones and Access Panels
Zone
 Access/Work location
550
 Access
 Panel 550BB
650
 Access
 Panel 650BB
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 28
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 43

@A300-600
SERVICE BULLETIN
Manpower Resources
Manhours
 2.50
Minimum number of person
 2
Subtask elapsed time
 1.25
Skills
 AIRFRAME
Material necessary to do the job
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Non Aqueous Cleaner -
Acetone
08BBH1
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
References
Aircraft Maintenance Manual (AMM)
 06-21-00, Page Block 001
28-10-00, Page Block 301
28-11-22, Page Block 401
28-25-00, Page Block 301
Service Bulletin (SB)
 A300-28-6114
Fig. A-UAAAB
Inspection Flowchart
Sheet
 01
Fig. A-UBAAA
Fuel Pump Canister Hood Halves
Inspection - Wing Tanks
Sheet
 01
WARNING
: YOU MUST OBEY ALL THE SAFETY PROCEDURES WHEN YOU DO
WORK IN OR NEAR A FUEL TANK. IF YOU DO NOT OBEY THE
SAFETY PROCEDURES, THERE IS A RISK OF:
- DEATH OR INJURY TO PERSONS
- DAMAGE TO THE AIRCRAFT OR TO OTHER EQUIPMENT.
(a) Defuel all of the aircraft fuel tanks, refer to AMM 28-25-00, Page Block 301.
(b) Prepare the aircraft as specified in AMM Task ’STORAGE - SERVICING (Fuel
Tank Draining, Venting and Entry)’, refer to AMM 28-10-00, Page Block 301.
1
 Before you go into a fuel tank you must complete the Pre-Entry Checklist,
refer to AMM 28-10-00, Page Block 301.
(c) Put platforms in position to get access to outer wing tanks - zones 550 LH (650
RH), refer to AMM 06-21-00, Page Block 001.
(d) Remove the outer wing tanks manhole covers 550BB LH (650BB RH), refer to
AMM 28-11-22, Page Block 401.
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 29
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 44

@A300-600
SERVICE BULLETIN
(e) Inspect the Outer Wing Tank Pump Canister Hood Halves:
1
 Clean the
2
 Hood Half
 205481
 Item (1
)
with a
Textile-Lint Free
Cotton
14SBA1
 As required
made moist with
Non Aqueous
Cleaner - Acetone
08BBH1
 As required
2
 Do a Detailed Inspection (DI) of the fuel pump canister hood halves in the
wing tanks:
- Wing tank (LH) - outboard FIN
 280018 and FIN
 280020.
- Wing tank (RH) - outboard FIN
 280019 and FIN
 280021.
Refer to and Fig. A-UBAAA Sheet 01
 .
a
 No cracks found in
2
 Hood Half
 205481
 Item (1
)
Make a record of the results, refer to Appendix 01: Inspection Findings -
Reporting Sheet
 .
b
 Cracks are found in
2
 Hood Half
 205481
 Item (1
)
Replace the Hood Halves.
Refer to TASK 286106-833-895 001 Replace
 .
NOTE
: Accomplishment of Service Bulletins No. A300-28-6114
cancels the repetitive inspection requirements of this
Service Bulletin for the outer tank fuel pumps.
3
 Make sure that all broken parts and unwanted materials are removed from the
related tank.
4
 Make a record of the results, refer to Appendix 01: Inspection Findings -
Reporting Sheet
 .
(f) Send a record of the inspection results to AIRBUS, refer to Appendix 01: Inspection
Findings - Reporting Sheet
 .
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 30
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 45

@A300-600
SERVICE BULLETIN
(3) Subtask 286106-832-402-001 - Inspection of the Center Tank Pump Canister Hood
Halves
Work Zones and Access Panels
Zone
 Access/Work location
141
 Access
 Panel 147AZ
142
 Access
 Panel 148AZ
Manpower Resources
Manhours
 1.50
Minimum number of person
 2
Subtask elapsed time
 0.75
Skills
 AIRFRAME
Material necessary to do the job
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Non Aqueous Cleaner -
Acetone
08BBH1
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
References
Aircraft Maintenance Manual (AMM)
 06-21-00, Page Block 001
28-10-00, Page Block 301
28-11-29, Page Block 401
28-25-00, Page Block 301
Service Bulletin (SB)
 A300-28-6110
Fig. A-UBCAA
Fuel Pump Canister Hood Halves
Inspection - Center Tank
Sheet 01
Fig. A-UAAAB
Inspection Flowchart
Sheet
 01
Fig. A-UCAAA
Replace the Fuel Pump Canister Hood
Halves - Typical
Sheet 01
WARNING
: YOU MUST OBEY ALL THE SAFETY PROCEDURES WHEN YOU DO
WORK IN OR NEAR A FUEL TANK. IF YOU DO NOT OBEY THE
SAFETY PROCEDURES, THERE IS A RISK OF:
- DEATH OR INJURY TO PERSONS
- DAMAGE TO THE AIRCRAFT OR TO OTHER EQUIPMENT.
(a) Defuel all of the aircraft fuel tanks, refer to AMM 28-25-00, Page Block 301.
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 31
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 46

@A300-600
SERVICE BULLETIN
(b) Prepare the aircraft as specified in AMM Task ’STORAGE - SERVICING (Fuel
Tank Draining, Venting and Entry)’, refer to AMM 28-10-00, Page Block 301.
1
 Before you go into a fuel tank you must complete the Pre-Entry Checklist,
refer to AMM 28-10-00, Page Block 301.
(c) Put platforms in position to get access to the center tank - zones 141 and 142,
refer to AMM 06-21-00, Page Block 001.
(d) Remove the center tank manhole covers 147AZ LH and 148AZ RH, refer to AMM
28-11-29, Page Block 401.
(e) Inspect the Center Tank Pump Canister Hood Halves:
1
 Clean the
2 Hood Half 3C93-129 Item (4)
with a
Textile-Lint Free
Cotton
14SBA1
 As required
made moist with
Non Aqueous
Cleaner - Acetone
08BBH1
 As required
2
 Do a Detailed Inspection (DI) to the fuel pump canister hood halves in the
center tank - LH FIN
 280022 and RH FIN 280023
Refer to and Fig. A-UBCAA Sheet 01
 .
a
 No cracks found in
2 Hood Half 3C93-129 Item (4)
Make a record of the results, refer to Appendix 01: Inspection Findings -
Reporting Sheet .
b
 Cracks are found in
2 Hood Half 3C93-129 Item (4)
Replace the Hood Halves.
Refer to TASK 286106-833-895 001 Replace
.
NOTE
: Accomplishment of Service Bulletins Nos.
 A300-28-6110
cancels the repetitive inspection requirements of this
Service Bulletin for the center tank fuel pumps.
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 32
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 47

@A300-600
SERVICE BULLETIN
3
 Make sure that all broken parts and unwanted materials are removed from the
related tank.
4
 Make a record of the results, refer to Appendix 01: Inspection Findings -
Reporting Sheet .
(f) Send a record of the inspection results to AIRBUS, refer to Appendix 01: Inspection
Findings - Reporting Sheet .
(4) Subtask 286106-832-404-002 - Inspection of the Trim Tank Transfer Pump Canister
Hood Halves
Work Zones and Access Panels
Zone
 Access/Work location
311
 Access
 Panel 319AZ
312
 Access
 Panel 319BZ
Manpower Resources
Manhours
 1.50
Minimum number of person
 2
Subtask elapsed time
 0.75
Skills
 AIRFRAME
Material necessary to do the job
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Non Aqueous Cleaner -
Acetone
08BBH1
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
References
Aircraft Maintenance Manual (AMM)
 06-21-00, Page Block 001
28-10-00, Page Block 301
28-25-00, Page Block 301
28-27-12, Page Block 401
Service Bulletin (SB)
 A300-28-6114
Fig. A-UBEAA
Fuel Pump Canister Hood Halves
Inspection - Trim Tank
Sheet
 01
Fig. A-UAAAB
Inspection Flowchart
Sheet
 01
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 33
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 48

@A300-600
SERVICE BULLETIN
WARNING
: YOU MUST OBEY ALL THE SAFETY PROCEDURES WHEN YOU DO
WORK IN OR NEAR A FUEL TANK. IF YOU DO NOT OBEY THE
SAFETY PROCEDURES, THERE IS A RISK OF:
- DEATH OR INJURY TO PERSONS
- DAMAGE TO THE AIRCRAFT OR TO OTHER EQUIPMENT.
(a) Defuel all of the aircraft fuel tanks, refer to AMM 28-25-00, Page Block 301.
(b) Prepare the aircraft as specified in AMM Task ’STORAGE - SERVICING (Fuel
Tank Draining, Venting and Entry)’, refer to AMM 28-10-00, Page Block 301.
1
 Before you go into a fuel tank you must complete the Pre-Entry Checklist,
refer to AMM 28-10-00, Page Block 301.
(c) Put platforms in position to get access to the trim tank - zones 311 and 312, refer
to AMM 06-21-00, Page Block 001.
(d) Remove the trim tank transfer pump canisters 319AZ and 319BZ, refer to AMM
28-27-12, Page Block 401.
(e) Inspect the Trim Tank Pump Canister Hood Halves:
1
 Clean the
2
 Hood Half
 205481
 Item (1
)
with a
Textile-Lint Free
Cotton
14SBA1
 As required
made moist with
Non Aqueous
Cleaner - Acetone
08BBH1
 As required
2
 Do a Detailed Inspection (DI) to the fuel pump canister hood halves in the trim
tank - FIN
 280432 and FIN
 280433
Refer to Fig. A-UAAAB Sheet 01
 and Fig. A-UBEAA Sheet 01
 .
3
 No cracks found in
2
 Hood Half
 205481
 Item (1
)
a
 Make a record of the results, refer to Appendix 01: Inspection Findings -
Reporting Sheet
 .
b
 Cracks are found in
2
 Hood Half
 205481
 Item (1
)
Replace the Hood Halves.
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 34
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 49

@A300-600
SERVICE BULLETIN
Refer to TASK 286106-833-895 001 Replace
 .
NOTE
: Accomplishment of Service Bulletins No. A300-28-6114
cancels the repetitive inspection requirements of this
Service Bulletin for the trim tank fuel pumps.
4
 Make sure that all broken parts and unwanted materials are removed from the
related tank.
5
 Make a record of the results, refer to Appendix 01: Inspection Findings -
Reporting Sheet
 .
(f) Send a record of the inspection results to AIRBUS, refer to Appendix 01: Inspection
Findings - Reporting Sheet
 .
**CONF ALL
D. TEST
**CONF 001
None
**CONF 002
None
**CONF ALL
E. CLOSE-UP
**CONF 001
(1) Subtask 286106-942-401-001 - Close-up
Manpower Resources
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 28-10-00, Page Block 301
NOTE
: If you intend to accomplish an associated Replace Task during the same
layover period, the subsequent close-up procedure is not necessary.
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the close-up procedure as specified in AMM Task ’STORAGE - SERVICING
(Fuel Tank Draining, Venting and Entry - Leaving a Fuel Tank)’, refer to
 AMM
28-10-00, Page Block 301.
(c) Remove the access platform(s).
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 35
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 50

@A300-600
SERVICE BULLETIN
(d) Put the aircraft back to its initial configuration.
**CONF 002
(1) Subtask 286106-942-401-001 - Close-up
Manpower Resources
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 28-10-00, Page Block 301
NOTE
: If you intend to accomplish an associated Replace Task during the same
layover period, the subsequent close-up procedure is not necessary.
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Do the close-up procedure as specified in AMM Task ’STORAGE - SERVICING
(Fuel Tank Draining, Venting and Entry - Leaving a Fuel Tank)’, refer to
 AMM
28-10-00, Page Block 301.
(c) Remove the access platform(s).
(d) Put the aircraft back to its initial configuration.
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 36
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 51

@A300-600
SERVICE BULLETIN
Task 286106-833-895-001 - Replace
**CONF ALL
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
WARNING
: THIS PROCEDURE USES A FUEL SYSTEM ITEM THAT IS IN A CATEGORY
KNOWN AS A CRITICAL DESIGN CONFIGURATION CONTROL LIMITATION
(CDCCL) CDCCL IDENTIFIES AN ITEM THAT CAN BE THE SOURCE OF A
POSSIBLE FUEL TANK IGNITION. YOU MUST KEEP ALL CDCCL ITEMS IN
THE APPROVED CONFIGURATION. DAMAGE, WEAR OR CHANGES TO A
CDCCL ITEM CAN CAUSE A POSSIBLE FUEL TANK EXPLOSION.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC. AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.
NOTE
: The accomplishment instructions of this Service Bulletin include procedures given
in other documents or in other sections of the Service Bulletin. When the words
’refer to’ are used and the operator has a procedure accepted by the local authority
he belongs to, the accepted alternative procedure can be used. When the words ’in
accordance with’ are used then the given procedure must be followed.
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE
: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE
: This Service Bulletin is classified mandatory or expected to be classified mandatory
by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.D. in these
accomplishment instructions are Required for Compliance (RC) and must be done
to comply with the AD. Other paragraphs are recommended and may be deviated
from, done as part of other actions or done with accepted methods different from
those given in the Service Bulletin, as long as the RC paragraphs can be done and
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 37
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 52

@A300-600
SERVICE BULLETIN
the aircraft can be put back into a serviceable condition.
NOTE
: This Service Bulletin contains the instructions for the on-aircraft maintenance
necessary to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions contained herein, contact AIRBUS for further
instructions and approval.
NOTE
: Discarded parts must be managed at the operator’s discretion.
Task Associated Data
**CONF 001
Zone
141
 142
 540
 550
 640
 650
Access
Panel
 147AZ
 148AZ
 542CB
 550BB
 642CB
 650BB
Manpower
TOTAL MANHOURS
 0.50
ELAPSED TIME (HOURS)
 0.50
**CONF 002
Zone
141
 142
 311
 312
 540
 550
 640
 650
Access
Panel
 147AZ
 148AZ
 319AZ
 319BZ
 542CB
 550BB
 642CB
 650BB
Manpower
TOTAL MANHOURS
 0.50
ELAPSED TIME (HOURS)
 0.50
**CONF ALL
A. GENERAL
**CONF 001
(1) Subtask 286106-910-402-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 06-21-00, Page Block 001
06-41-53, Page Block 001
06-41-57, Page Block 001
28-00-00, Page Block 301
28-10-00, Page Block 301
Consumable Material List (CML)
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 38
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 53

@A300-600
SERVICE BULLETIN
(a) For the specification of materials (Mat. No.) that you must use in this Service
Bulletin refer to Consumable Materials List (CML).
(b) For the identification of Access Panels, refer to AMM 06-41-53, Page Block 001
and AMM 06-41-57, Page Block 001.
(c) For the identification of zones, refer to AMM 06-21-00, Page Block 001.
(d) Obey the safety procedures when you do work in a fuel tank, refer to AMM
28-10-00, Page Block 301 and AMM 28-00-00, Page Block 301.
(2) Subtask 286106-839-402-001 - Administrative
Manpower Resources
Skills
 AIRFRAME
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
**CONF 002
(1) Subtask 286106-910-402-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 06-21-00, Page Block 001
06-41-53, Page Block 001
06-41-57, Page Block 001
28-00-00, Page Block 301
28-10-00, Page Block 301
Consumable Material List (CML)
(a) For the specification of materials (Mat. No.) that you must use in this Service
Bulletin refer to Consumable Materials List (CML).
(b) For the identification of Access Panels, refer to AMM 06-41-53, Page Block 001
and AMM 06-41-57, Page Block 001.
(c) For the identification of zones, refer to AMM 06-21-00, Page Block 001.
(d) Obey the safety procedures when you do work in a fuel tank, refer to AMM
28-10-00, Page Block 301 and AMM 28-00-00, Page Block 301.
(2) Subtask 286106-839-402-001 - Administrative
Manpower Resources
Skills
 AIRFRAME
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 39
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 54

@A300-600
SERVICE BULLETIN
**CONF ALL
B. PREPARATION
**CONF 001
(1) Subtask 286106-941-403-001 - Job Set-up - Wing and Center Tank
Work Zones and Access Panels
Zone
 Access/Work location
540
 Access
 Panel 542CB
640
 Access
 Panel 642CB
550
 Access
 Panel 550BB
650
 Access
 Panel 650BB
141
 Access
 Panel 147AZ
142
 Access
 Panel 148AZ
Manpower Resources
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 06-21-00, Page Block 001
28-10-00, Page Block 301
28-11-22, Page Block 401
28-11-29, Page Block 401
28-25-00, Page Block 301
WARNING
: YOU MUST OBEY ALL THE SAFETY PROCEDURES WHEN YOU DO
WORK IN OR NEAR A FUEL TANK. IF YOU DO NOT OBEY THE
SAFETY PROCEDURES, THERE IS A RISK OF:
- DEATH OR INJURY TO PERSONS
- DAMAGE TO THE AIRCRAFT OR TO OTHER EQUIPMENT.
NOTE
: If you intend to accomplish this Replace Task during the same
layover period as the associated Inspection, the subsequent Preparation
procedure is not necessary.
NOTE
: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
- Aircraft on the ground resting on landing gear (the ground safety
locks and the wheel chocks are in position on the landing gear)
- Engine shut down, thrust reversers closed and locked
- Aircraft in clean configuration
- Parking brake applied
- Aircraft electrical network de-energized
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 40
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 55

@A300-600
SERVICE BULLETIN
- Hydraulic system s depressurized
- Access to the cockpit and cabin is available
- All circuit breakers are in closed position
- All controls in NORM, AUTO or OFF position.
(a) Defuel all of the aircraft fuel tanks, refer to AMM 28-25-00, Page Block 301.
(b) Prepare the aircraft as specified in AMM Task ’STORAGE - SERVICING (Fuel
Tank Draining, Venting and Entry)’, refer to AMM 28-10-00, Page Block 301.
1
 Before you go into a fuel tank you must complete the Pre-Entry Checklist,
refer to AMM 28-10-00, Page Block 301.
(c) Put platforms in position to get access to the applicable zones, refer to AMM
06-21-00, Page Block 001:
1
 Wing tanks inner - Zones 540 LH (640 RH).
2
 Wing tanks outer - Zones 550 LH (650 RH).
3
 Center tank - Zones 141 and 142.
(d) Remove the applicable manhole covers:
1
 Wing tanks inner 542CB LH (642CB RH), refer to AMM 28-11-22, Page Block
401
2
 Wing tanks outer 550BB LH (650BB RH), refer to AMM 28-11-22, Page Block
401
3
 Center tank canisters 147AZ LH and 148AZ RH, refer to AMM 28-11-29, Page
Block 401.
**CONF 002
(1) Subtask 286106-941-403-001 - Job Set-up - Wing and Center Tank
Work Zones and Access Panels
Zone
 Access/Work location
540
 Access
 Panel 542CB
640
 Access
 Panel 642CB
550
 Access
 Panel 550BB
650
 Access
 Panel 650BB
141
 Access
 Panel 147AZ
142
 Access
 Panel 148AZ
Manpower Resources
Skills
 AIRFRAME
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 41
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 56

@A300-600
SERVICE BULLETIN
References
Aircraft Maintenance Manual (AMM)
 06-21-00, Page Block 001
28-10-00, Page Block 301
28-11-22, Page Block 401
28-11-29, Page Block 401
28-25-00, Page Block 301
WARNING
: YOU MUST OBEY ALL THE SAFETY PROCEDURES WHEN YOU DO
WORK IN OR NEAR A FUEL TANK. IF YOU DO NOT OBEY THE
SAFETY PROCEDURES, THERE IS A RISK OF:
- DEATH OR INJURY TO PERSONS
- DAMAGE TO THE AIRCRAFT OR TO OTHER EQUIPMENT.
NOTE
: If you intend to accomplish this Replace Task during the same
layover period as the associated Inspection, the subsequent Preparation
procedure is not necessary.
NOTE
: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
- Aircraft on the ground resting on landing gear (the ground safety
locks and the wheel chocks are in position on the landing gear)
- Engine shut down, thrust reversers closed and locked
- Aircraft in clean configuration
- Parking brake applied
- Aircraft electrical network de-energized
- Hydraulic system s depressurized
- Access to the cockpit and cabin is available
- All circuit breakers are in closed position
- All controls in NORM, AUTO or OFF position.
(a) Defuel all of the aircraft fuel tanks, refer to AMM 28-25-00, Page Block 301.
(b) Prepare the aircraft as specified in AMM Task ’STORAGE - SERVICING (Fuel
Tank Draining, Venting and Entry)’, refer to AMM 28-10-00, Page Block 301.
1
 Before you go into a fuel tank you must complete the Pre-Entry Checklist,
refer to AMM 28-10-00, Page Block 301.
(c) Put platforms in position to get access to the applicable zones, refer to AMM
06-21-00, Page Block 001:
1
 Wing tanks inner - Zones 540 LH (640 RH).
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 42
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 57

@A300-600
SERVICE BULLETIN
2
 Wing tanks outer - Zones 550 LH (650 RH).
3
 Center tank - Zones 141 and 142.
(d) Remove the applicable manhole covers:
1
 Wing tanks inner 542CB LH (642CB RH), refer to AMM 28-11-22, Page Block
401
2
 Wing tanks outer 550BB LH (650BB RH), refer to AMM 28-11-22, Page Block
401
3
 Center tank canisters 147AZ LH and 148AZ RH, refer to AMM 28-11-29, Page
Block 401.
(2) Subtask 286106-941-404-001 - Job Set-up - Trim Tank
Work Zones and Access Panels
Zone
 Access/Work location
311
 Access
 Panel 319AZ
312
 Access
 Panel 319BZ
Manpower Resources
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 06-21-00, Page Block 001
28-10-00, Page Block 301
28-25-00, Page Block 301
28-27-12, Page Block 401
WARNING
: YOU MUST OBEY ALL THE SAFETY PROCEDURES WHEN YOU DO
WORK IN OR NEAR A FUEL TANK. IF YOU DO NOT OBEY THE
SAFETY PROCEDURES, THERE IS A RISK OF:
- DEATH OR INJURY TO PERSONS
- DAMAGE TO THE AIRCRAFT OR TO OTHER EQUIPMENT.
NOTE
: If you intend to accomplish this Replace Task during the same
layover period as the associated Inspection, the subsequent Preparation
procedure is not necessary.
NOTE
: The items given in this note shall be considered as the basic Aircraft
configuration before you start a maintenance task:
- Aircraft on the ground resting on landing gear (the ground safety
locks and the wheel chocks are in position on the landing gear)
- Engine shut down, thrust reversers closed and locked
- Aircraft in clean configuration
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 43
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 58

@A300-600
SERVICE BULLETIN
- Parking brake applied
- Aircraft electrical network de-energized
- Hydraulic system s depressurized
- Access to the cockpit and cabin is available
- All circuit breakers are in closed position
- All controls in NORM, AUTO or OFF position.
(a) Defuel all of the aircraft fuel tanks, refer to AMM 28-25-00, Page Block 301.
(b) Prepare the aircraft as specified in AMM Task ’STORAGE - SERVICING (Fuel
Tank Draining, Venting and Entry)’, refer to AMM 28-10-00, Page Block 301.
1
 Before you go into a fuel tank you must complete the Pre-Entry Checklist,
refer to AMM 28-10-00, Page Block 301.
(c) Put platforms in position to get access to the applicable zones:
1
 Trim tank - Zones 311 and 312, refer to AMM 06-21-00, Page Block 001:
(d) Remove the applicable manhole covers:
1
 Trim tank transfer pump canisters 319AZ and 319BZ, refer to AMM 28-27-12,
Page Block 401.
**CONF ALL
C. PROCEDURE
**CONF 001
(1) Subtask 286106-833-401-001 - Replace the Fuel Pump Canister Hood Halves
Manpower Resources
Manhours
 0.50
Minimum number of person
 1
Subtask elapsed time
 0.50
Skills
 AIRFRAME
Material necessary to do the job
Equipment BFEB01
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 205481
 2
 HOODHALF
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 44
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 59

@A300-600
SERVICE BULLETIN
NOTE
: One BFEB01 is required for each Fuel Pump Canister. The total
quantity of BFE kits will be determined by the result of the inspection
requirements of this Service Bulletin.
Canister Hood PN 205481 for Fuel Pump Canister PN 2052C11 or PN
2052C12.
NOTE
: For Center and Inner tank pumps, the installation of improved canister
hoods are recommended through accomplishment of Service Bulletin No.
A300-28-6110.
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
NOTE
: Trim (if fitted) and Outer fuel tank pumps, the installation of improved
canister hoods are recommended through accomplishment of Service
Bulletin No. A300-28-6114.
Equipment BFEB02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
4
 3C93-129
 2
 HOODHALF
NOTE
: One BFEB02 is required for each Fuel Pump Canister. The total
quantity of BFE kits will be determined by the result of the inspection
requirements of this Service Bulletin.
Canister Hood PN 3C93-129 for Fuel Pump Canister PN C93R51-601.
NOTE
: For Center and Inner tank pumps, the installation of improved canister
hoods are recommended through accomplishment of Service Bulletin No.
A300-28-6110.
NOTE
: The above list of components is not an AIRBUS Kit, the required parts
shall be ordered as necessary through the given channel.
NOTE
: Trim (if fitted) and Outer fuel tank pumps, the installation of improved
canister hoods are recommended through accomplishment of Service
Bulletin No. A300-28-6114.
Consumable CMLB01
ITEM
 DESCRIPTION
 REFERENCE TO
CML MAT. No.
QTY PER A/C
 SEE
NOTES
Non Aqueous Cleaner -
Acetone
08BBH1
 As required
Textile-Lint Free Cotton
 14SBA1
 As required
References
Service Bulletin (SB)
 A300-28-6110
A300-28-6114
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 45
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 60

@A300-600
SERVICE BULLETIN
References
Fig. A-UCAAA
Replace the Fuel Pump Canister Hood
Halves - Typical
Sheet 01
(a) Replace the fuel pump canister hood halves, do the steps that follow, refer to Fig.
A-UCAAA Sheet 01
:
1
 Clean the surface area of the fuel pump canister with a
Textile-Lint Free
Cotton
14SBA1
 As required
made moist with
Non Aqueous
Cleaner - Acetone
08BBH1
 As required
2
 Remove:
6 Screw Item (2) Retain
6 Washer Item (3) Retain
2 Hood Half 205481 Item (1) Discard
or
2 Hood Half 3C93-129 Item (4) Discard
NOTE
: If there are defective parts they must be replaced with Vendor
INTERTECHNIQUE replacement parts.
NOTE
: The discarded hood halves have to be replaced with a new
ones with the same Part Number.
3
 Install the:
2 Hood Half 205481 Item 1
or
2 Hood Half 3C93-129 Item 4
with:
6 Screw Item (2) Retained at
removal
6 Washer Item (3) Retained at
removal
(b) Make sure that all broken parts and unwanted materials are removed from the
related tank.
DATE: Jan 13/11 SERVICE BULLETIN No.: A300-28-6106
REVISION No.: 03 - Dec 16/16 Page: 46
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

The text continues at https://openairdocs.org/service-documents/airbus/sb-28-6106/file/f9df3cfc36cb.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
