# Airbus Service Bulletin 57-6005-06

Copy: No revision named ("SB_57_6005_06"), 30 pages: PDF https://openairdocs.org/files/sha256/f1/b7/f1b76cda4cce6b664fd048c530afb85d450b8e609bd4dcaa6d669a5bc34b9dce; text https://openairdocs.org/service-documents/airbus/sb-57-6005-06/file/f1b76cda4cce.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2015-8470, the docket of AD 2016-20-08. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: 57-6005-06
- Page: https://openairdocs.org/service-documents/airbus/sb-57-6005-06

## Text (30 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2015-8470, the docket of AD 2016-20-08. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

@A300-600
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 57
TITLE: WINGS- FLAP BEAM 2 - INSPECTION OF FLAP BEAM BASE AND SIDE
MEMBERS.
MODIFICATION No.: None
This page transmits Revision No.06 of Service Bulletin No.A300-57-6005
ADDITIONAL WORK
**CONF ALL
No additional work is required by this revision for aircraft modified by any previous issue.
REASON
Revision No. 06 issued to:
- update the effectivity
- clarify aircraft not affected by this Service Bulletin
- add accomplishment instruction notes in the inspection tasks.
CHANGES
SUMMARY
EFFECTIVITY
 OPERATOR LIST UPDATED
 R
Fig. A-USAAA
 FIGURE SOLUTION UPDATED
 R
PLANNING INFORMATION
EFFECTIVITY
 Effectivity has been updated
 R
Configuration definition
CONF 001
 CONFIGURATION DEFINITION UPDATED
 R
REASON
 REASON UPDATED
 R
COMPLIANCE
Accomplishment Timescale
 ACCOMPLISHMENT TIMESCALE UPDATED
 R
ACCOMPLISHMENT INSTRUCTIONS
TASK 576005- 832-895-001- INSPECTION
 Accomplishment instructions Notes added
 R
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 2

@A300-600
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
Subtask 576005-910-401-001
 SUBTASK SOLUTION UPDATED
 R
Fig. A-UBAAA
 FIGURE SOLUTION UPDATED
 R
Fig. A-UCAAA
 FIGURE SOLUTION UPDATED
 R
Fig. A-UDAAA
 FIGURE SOLUTION UPDATED
 R
Fig. A-UEAAA
 FIGURE SOLUTION UPDATED
 R
Fig. A-UFAAA
 FIGURE SOLUTION UPDATED
 R
FILLING INSTRUCTIONS
This Service Bulletin has been generated electronically and is reissued as a complete document.
Replace the complete document.
Put this Revision Transmittal Sheet in front of the Service Bulletin.
HISTORY OF PREVIOUS REVISIONS
Revision 01 was issued to incorporate rewrites of Paras. 1 and 3 and amendments to references to
various manuals.
Revision 02 was issued to incorporate changes to the effectivity and changes to Paras. 1.B., 1.C. and
inclusion of the Summary pages.
Revision 03 was issued to incorporate Change Notices 2A through 2C, and include editorial changes
and updates to the effectivity.
Revision 04 issued to update the effectivity, to add new aircraft model C4-605R/F and the aircraft MSN
0755 and 0758. Also the statements for the approval and manpower are amended.
Revision No. 05 issued to re-introduce an inspection for aircraft Post Modification No. 05815H00968
and aircraft Post Modification No. 11133H05409. Service Bulletin No. A300-57-6006 (Mod. No.
05815H00968). For some aircraft this increases the inspection threshold, for other aircraft it cancels
the requirements of this Inspection Service Bulletin (ISB) depending on the aircraft configuration or
modification embodiment point.
The inspection thresholds and intervals relating to the embodiment of Modification No. 05815H00968
and Modification No. 11133H05409 are now included in the paragraph 1.E (2).
REVISION SEQUENCE
ORIGINAL: Aug 18/86
REVISION No. : 01 - Feb 26/93
REVISION No. : 02 - Dec 01/93
REVISION No. : 03 - Nov 25/97
REVISION No. : 04 - Oct 25/99
REVISION No. : 05 - Apr 25/13
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 3

@A300-600
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
REVISION No. : 06 - Nov 14/13
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 4

@A300-600
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
This Page Intentionally Left Blank
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 5

@A300-600
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
This summary is for information only and is not approved for modification of the aircraft.
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 57
TITLE: WINGS- FLAP BEAM 2 - INSPECTION OF FLAP BEAM BASE AND SIDE
MEMBERS.
**CONF ALL
MODIFICATIONS
None
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
Calculations, confirmed by fatigue and fail safe testing, show that on flap beam 2, transverse cracking
may occur at the bolt holes of the flap beam base members and light alloy side members.
During fatigue testing, the flap beam 2 developed cracks at the steel base member and light alloy side
members lower flanges at approximately 43,000 simulated flights and failure occurred at approximately
48,000 simulated flights.
For aircraft with an average flight time (AFT) greater than or equal to 1.5 hours Service Bulletin No.
A300-57-6005 requires the flap beam 2 to be inspected upon completion of 15,000 Flight Cycles (FC).
Repeat inspections are required at intervals of 1,500 flights as long as cracks are not found.
Modification No. 05815H00968 (Service Bulletin No. A300-57-6006) introduces oversized interference fit
bolts in cold expanded holes in order to increase the fatigue life of the flap beam base and side
members. If no cracks are found, it is recommended that the modification should be embodied at the
following aircraft lives:
For aircraft with an AFT greater than or equal to 1.5 hours:
- 15,000 FC / 32,400 FH (whichever occurs first).
For aircraft with an AFT less than 1.5 hours:
- 16,200 FC / 24,300 FH (whichever occurs first).
The objective of this Service Bulletin requires the flap beam 2 to be inspected using ultrasonic
techniques to detect cracks that extend from the bolt holes in the steel base member and aluminium
side members.
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 6

@A300-600
SERVICE BULLETIN
SUMMARY
This Service Bulletin can detect signs of cracks at a sufficiently early stage of life to prevent the need to
do expensive and time consuming repairs.
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE
 MANDATORY (1)
 CANCELS INSPECTION SB
 NO
POTENTIAL AD
 YES
 A/C OPERATION AFFECTED
 NO
RELIABILITY AFFECTED
 NO
 PAX COMFORT AFFECTED
 NO
COST SAVING
 NO
 ETOPS AFFECTED
 NO
STRUCTURAL LIFE EXTN
 NO
 VENDOR SB INVOLVED
 NO
NOTE
 (1)
: Service Bulletin must be accomplished.
MATERIAL PRICE INFORMATION
No Material
EFFECTIVITY
This Service Bulletin is applicable to this (these) operator(s) :
ABD ABR BCS CES F2I FDX GBG
 I2L IRA IRM KAC KAL MGC
MNB MON MSR MXU OHY QTR SUD TAR THA URS UZB
CONCURRENT REQUIREMENTS
None
REFERENCES / REPERCUSSIONS
TFU
 None
OEB
 None
AOT
 None
SIL
 None
LINE MAINTENANCE AFFECTED
 No
LIFE LIMIT
 None
OTHER
 None
NATURE OF THE WORK
AIRCRAFT
 YES
EQUIPMENT
 NO
HARD
 NO
SOFT
 NO
OBRM
 NO
MANPOWER
Task 576005-832-895-001: INSPEC TION
TOTAL MANHOURS
 6.00
ELAPSED TIME (HOURS)
 5.00
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 7

@A300-600
SERVICE BULLETIN
SUMMARY
APPENDICES
None
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 8

@A300-600
SERVICE BULLETIN
SUMMARY
**CONF ALL
D_SB_576005_7_SAAA_01_00
AZ532 (Z632)
A
AREA OF INSPECTION
NOTE:
LH SHOWN
RH SIMILAR
Figure A-U SAAA - S heet 01
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 9

@A300-600
SERVICE BULLETIN
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
MANDATORY
 MANDATORY
 MANDATORY
ATA SYSTEM: 57
TITLE: WINGS- FLAP BEAM 2 - INSPECTION OF FLAP BEAM BASE AND SIDE
MEMBERS.
MODIFICATION No.: None
This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the
property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with
any information contained in it. It is delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall not be used for any purpose other than
that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall
not be duplicated in any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the conditions herein), without
AIRBUS prior written consent.
1. PLANNING INFORMATION
**CONF ALL
A. EFFECTIVITY
NOTE
: This Service Bulletin is applicable to all A300-600 aircraft, all certified models
and all MSNs, except:
- A300F4-622R aircraft on which the following AIRBUS modifications
(Mod.) have been embodied: 11133H5409, 12047S21726, 12048S21727
and 12050S21744.
- A300F4-650R and A300F4-622R aircraft on which both AIRBUS Mod.
Nos. 11133H5409 and 12699S22372 have been embodied.
(1) Models
B4-603 B4-605R B4-620 B4-622 B4-622R C4-605R/F C4-620 F4-605R
(2) Effectivity by MSN
0294 0344 0358 0361 0365 0380 0388 0401 0405 0408 0411 0414 0417 0464
 0477
0479 0505
 0518 0521 0525 0529-0530 0532 0536 0543 0546 0553-0561 0563 0572
0575 0577 0579 0581
 0584 0602-0605 0607-0608
 0611
 0613-0614 0617-0618 0621
0623 0625-0626
 0629-0633
 0637 0641 0643 0657 0659 0662 0664 0666 0668 0670
0673 0677 0679 0681 0683 0688 0694 0696 0699 0701 0703 0705 0707 0709 0711
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 10

@A300-600
SERVICE BULLETIN
0713 0715 0717 0719 0721-0730
 0732-0746
 0748-0750 0752-0764 0766-0775
0777-0794
 0797
 0799-0804
 0836-0838
(3) Effectivity by Operator
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting from transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
OPERATOR
 MSN
ABD
 0529 0557
ABR
 0683 0770
BCS
 0602 0617 0621 0637 0641 0670 0679 0703 0711 0724 0729 0730
0737 0740 0753 0783
CES
 0532 0707 0725 0732 0741 0746 0754 0763
F2I
 0294 0518
FDX
 0358 0361 0365 0388 0417 0477 0479 0530 0536 0543 0555 0559
0572 0575 0579 0581 0611 0613 0625 0630 0633 0657 0659 0664
0668 0688 0709 0713 0715 0726 0728 0735 0736 0738 0742 0745
0748 0752 0757 0759 0760 0761 0766 0768 0769 0771 0772 0774
0777 0778
 0779
 0780
 0781
 0789
 0790
 0791
 0792
 0793
 0794
 0799
0800
 0801
 0802
 0803
 0804
GBG
 0626
 0643
I2L
 0677
IRA
 0632 0696 0723 0727
IRM
 0380 0401 0405 0408 0411 0414 0546 0553 0608 0618 0623 0701
0750 0762 0773 0838
KAC
 0344 0673 0694 0699 0719 0721
KAL
 0631 0662
MGC
 0743
MNB
 0521
 0525
 0734 0739 0755 0756 0758
MON
 0556 0604 0605
MSR
 0561 0607
MXU
 0767 0788
 0797
 0836
 0837
OHY
 0584 0603 0744 0749 0764
QTR
 0554 0560 0614
SUD
 0666 0775
TAR
 0505 0558 0563
THA
 0464 0577 0629 0681 0705 0782
 0784
 0785
 0786
 0787
URS
 0733
UZB
 0717 0722
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 11

@A300-600
SERVICE BULLETIN
(4) Configuration by MSN
MSN
 CONFIGURATION
0294 0344 0358 0361 0365 0380 0388 0401 0405 0408 0411
0414 0417 0464 0477 0479 0505 0518 0521 0525 0529 0530
0532 0536 0543 0546 0553 0554 0555 0556 0557 0558 0559
0560 0561 0563 0572 0575 0577 0579 0581 0584 0602 0603
0604 0605 0607 0608 0611 0613 0614 0617 0618 0621 0623
0625 0626 0629 0630 0631 0632 0633 0637 0641 0643 0657
0659 0662 0664 0666 0668 0670 0673 0677 0679 0681 0683
0688 0694 0696 0699 0701 0703 0705 0707 0709 0711 0713
0715 0717 0719 0721 0722 0723 0724 0725 0726 0727 0728
0729 0730 0732 0733 0734 0735 0736 0737 0738 0739 0740
0741 0742 0743 0744 0745 0746 0748 0749 0750 0752 0753
0754 0755 0756 0757 0758 0759 0760 0761 0762 0763 0764
0766 0767 0768 0769 0770 0771 0772 0773 0774 0775
 0777
0778
 0779
 0780
 0781
 0782
 0783
 0784
 0785
 0786
 0787
 0788
0789
 0790
 0791
 0792
 0793
 0794
 0797
 0799
 0800
 0801
 0802
0803
 0804
 0836
 0837
 0838
001
(5) Configuration definition
**CONF 001
Config. 001 is valid for all the aircraft given in the effectivity of this Service Bulletin as a
standard configuration.
(6) Material Effectivity
B. CONCURRENT REQUIREMENTS
None
C. REASON
(1) History
Calculations, confirmed by fatigue and fail safe testing, show that on flap beam 2,
transverse cracking may occur at the bolt holes of the flap beam base members and
light alloy side members.
During fatigue testing, the flap beam 2 developed cracks at the steel base member and
light alloy side members lower flanges at approximately 43,000 simulated flights and
failure occurred at approximately 48,000 simulated flights.
For aircraft with an average flight time (AFT) greater than or equal to 1.5 hours Service
Bulletin No. A300-57-6005 requires the flap beam 2 to be inspected upon completion of
15,000 Flight Cycles (FC). Repeat inspections are required at intervals of 1,500 flights
as long as cracks are not found.
Modification No. 05815H00968 (Service Bulletin No. A300-57-6006) introduces oversized
interference fit bolts in cold expanded holes in order to increase the fatigue life of the
flap beam base and side members. If no cracks are found, it is recommended that the
modification should be embodied at the following aircraft lives:
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 12

@A300-600
SERVICE BULLETIN
For aircraft with an AFT greater than or equal to 1.5 hours:
- 15,000 FC / 32,400 FH (whichever occurs first).
For aircraft with an AFT less than 1.5 hours:
- 16,200 FC / 24,300 FH (whichever occurs first).
(2) Objective/Action
The objective of this Service Bulletin requires the flap beam 2 to be inspected using
ultrasonic techniques to detect cracks that extend from the bolt holes in the steel base
member and aluminium side members.
(3) Advantages
This Service Bulletin can detect signs of cracks at a sufficiently early stage of life to
prevent the need to do expensive and time consuming repairs.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to :
Task 576005-832-895-001: INSPEC TION
(1) ULTRASONIC INSPECTION OF TH E STEEL BASE MEM BER AND ALUMINIUM
SIDE MEMBER ON FLAP BEAMS 2 (LH/RH)
E. COMPLIANCE
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
This Service Bulletin has been classified Mandatory. It is expected that an Airworthiness
Directive (AD) published by the European Av iation Safety Agenc y (EASA) will be issued
to confirm this classification. It is anticipated that the AD will confirm the (thresholds
and/or intervals and/or date) given above but reference should be made to the AD for
confirmation of the mandated accomplishment timescale.
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 13

@A300-600
SERVICE BULLETIN
CONDITION
 CONFIGURATION
 INSPECTION
THRESHOLD
INSPECTION
INTERVAL
GRACE
PERIOD
Pre-Modification
05815H00968 or Pre-
Modification
11133H05409
15,000 FC / 32,400 FH
Post Modification
05815H00968 or Pre-
Modification
11133H05409 and bolts
less than 11.11 mm
(0.438 in) diameter
**33,000 FC / 71,200 FH
Post Modification
05815H00968 or Pre-
Modification
11133H05409 and bolts
not less than 11.11 mm
(0.438 in) diameter
**22,000 FC / 47,500 FH
For aircraft with
an average
flight time (AFT)
equal to or
more than 1.5
hours
Post Modification
11133H05409
 33,000 FC / 71,200 FH
1,500 FC /
3,200 FH
300 FC /
640 FH
Crack found
 Contact Airbus
 Before next flight
Table 1: For aircraft with an average flight time (AFT) equal to or more than 1.5 hours
**NOTE: FC / FH from modification embodiment.
CONDITION
 CONFIGURATION
 INSPECTION
THRESHOLD
INSPECTION
INTERVAL
GRACE
PERIOD
Pre-Modification
05815H00968 or Pre-
Modification
11133H05409
16,200 FC / 24,300 FH
Post Modification
05815H00968 or Pre-
Modification
11133H05409 and bolts
less than 11.11 mm
(0.438 in) diameter
**35,600 FC / 53,400 FH
Post Modification
05815H00968 or Pre-
Modification
11133H05409 and bolts
not less than 11.11 mm
(0.438 in) diameter
**23,700 FC / 35,600 FH
For aircraft with
an average
flight time (AFT)
less than 1.5
hours
Post Modification
11133H05409
 35,600 FC / 53,400 FH
1,600 FC /2,400
FH
300 FC /
640 FH
Crack found
 Contact Airbus
 Before next flight
Table 2: For aircraft with an average flight time (AFT) less than 1.5 hours
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 5
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 14

@A300-600
SERVICE BULLETIN
**NOTE: FC / FH from modification embodiment.
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organization Approv al No. EASA. 21J.031.
If an aircraft listed in the effectivity has a modification or repair embodied that is not of
AIRBUS origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also not
included.
Task 576005-832-895-001: INSPEC TION
Get Access
 2.00
On Aircraft
ULTRASONIC INSPECTION OF THE STEEL BASE
MEMBER AND ALUMINIUM SIDE MEMBER ON FLAP
BEAMS 2 (LH/RH)
2.00
Close-Up
 2.00
TOTAL MANHOURS
 6.00
ELAPSED TIME (HOURS)
 5.00
H. WEIGHT AND BALANCE
Not Changed
I. ELECTRICAL LOAD DATA
Not Changed
J. REFERENCES
Aircraft Maintenance Manual (AMM)
 06-21-00 06-41-00 20-16-00
24-00-00 27-50-00 27-50-21
57-20-35
Consumable Material List (CML)
Elec. Std. Practices Manual (ESPM)
 20-55-00
Non Destructive Test Manual (NTM)
 57-20-11
K. PUBLICATION AFFECTED
None
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 6
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 15

@A300-600
SERVICE BULLETIN
L. INTERCHANGEABILITY/MIXABILITY
Not Applicable
M. SPARES
None
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 7
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 16

@A300-600
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 8
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 17

@A300-600
SERVICE BULLETIN
2. MATERIAL INFORMATION
**CONF ALL
A. MATERIAL - PRICE AND AVAILABILITY
(1) Procurement Addresses
None
(2) Price and Availability
None
B. INDUSTRY SUPPORT INFORMATION
None
C. LIST OF COMPONENTS
No Kit
D. LIST OF MATERIALS - OPERATOR SUPPLIED
None
E. PARTS TO BE RE-IDENTIFIED BY OPERATOR
None
F. TOOLING
None
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 9
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 18

@A300-600
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 10
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 19

@A300-600
SERVICE BULLETIN
3. ACCOMPLISHMENT INSTRUCTIONS
Task 576005-832-895-001 - IN SPECTION
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
WARNING
: MAKE SURE THAT THE SAFETY DEVICES AND THE WARNING NOTICES ARE
IN POSITION BEFORE YOU START A TASK ON OR NEAR:
- THE FLIGHT CONTROLS
- THE FLIGHT CONTROL SURFACES
- THE LANDING GEAR AND THE RELATED DOORS
- COMPONENTS THAT MOVE.
MOVEMENT OF COMPONENTS CAN KILL OR INJURE PERSONS.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC. AS
NECESSARY ON WIRING AND COMPONENTS
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.
NOTE
: The accomplishment instructions of this Service Bulletin refer to procedures
included in other AIRBUS documents. When the words ’refer to’ are used and the
operator has an accepted alternative procedure, the accepted alternative procedure
can be used. When the words ’in accordance with’ are included in the instruction,
the procedure in the AIRBUS document must be used.
NOTE
: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service
Bulletin. Operators can therefore, as deemed necessary, omit or add access and/or
close-up steps to add flexibility to their maintenance operations as long as the
technical intent of the Service Bulletin is met within the set parameters.
NOTE
: Manual titles given in the accomplishment instructions are referred to by acronyms.
Refer to paragraph 1.J., References, for the definition of acronyms.
NOTE
: This Service Bulletin is classified mandatory or expected to be classified mandatory
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 11
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 20

@A300-600
SERVICE BULLETIN
by an Airworthiness Directive (AD). The paragraphs 3.C. and 3.D. in these
accomplishment instructions are Required for Compliance (RC) and must be done
to comply with the AD. Other paragraphs are recommended and may be deviated
from, done as part of other actions or done with accepted methods different from
those given in the Service Bulletin, as long as the RC paragraphs can be done and
the aircraft can be put back into a serviceable condition.
NOTE
: The purpose of flow charts is to supplement the information given in the Procedure
and Compliance paragraphs and not to serve as the primary source for tasks or
compliance times given in this Service Bulletin.
Task Associated Data
Zone
532 632
Access
Door
 575FB 675FB AL AR
Panel
 AL AR
Manpower
TOTAL MANHOURS
 6.00
ELAPSED TIME (HOURS)
 5.00
A. GENERAL
(1) Subtask 576005-910-401-001 - STANDARD PRACTICES
Manpower Resources
Skills
 NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 06-21-00, Page Block 001
06-41-00, Page Block 001
20-16-00, Page Block 201
Consumable Material List (CML)
Non Destructive Test Manual (NTM)
 57-20-11
(a) For the specification of materials (Mat. No.) given in this Service Bulletin refer to
the Consumable Materials List (CML).
(b) For the identification of zones, refer to AMM 06-21-00, Page Block 001.
(c) For the identification of access panels, refer to AMM 06-41-00, Page Block 001.
(d) For the circuit breaker safety precautions, refer to AMM 20-16-00, Page Block 201.
(e) For ultrasonic evaluation of crack lengths (Refer to NTM 57-20-11).
(2) Subtask 576005-839-401-001 - ADMINISTRATIVE
Manpower Resources
Skills
 NON SPECIFIC
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 12
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 21

@A300-600
SERVICE BULLETIN
Write in the applicable aircraft records that you have done all the work given in this
Service Bulletin.
B. PREPARATION
(1) Subtask 576005-941-401-001 - GET ACCESS TO THE FLAP BEAMS
Work Zones and Access Panels
Zone
 Access/Work location
532
 Access
 Door 575FB, Door AL
Work location
 Panel 133VU
632
 Access
 Door 675FB
Panel AR
Work location
 Panel 133VU
Manpower Resources
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 24-00-00, Page Block 301
27-50-00, Page Block 301
27-50-21, Page Block 401
57-20-35, Page Block 401
Consumable Material List (CML)
(a) Make sure that the aircraft is electrically grounded (Refer to AMM 24-00-00, Page
Block 301).
(b) Remove the fixed fairings from flap beam 2 (Refer to AMM 57-20-35, Page Block
401).
(c) Fully extend the flap (Refer to AMM 27-50-00, Page Block 301).
(d) Remove the moveable fairings from flap beam 2 (Refer to AMM 27-50-21, Page
Block 401).
(e) Put the access platform(s) in position below the flap beam 2.
C. PROCEDURE
(1) Subtask 576005-832- 401-001 - ULTRASONIC INSPECTION OF THE STEEL BASE
MEMBER AND ALUMINIUM SIDE MEMBER ON FLAP BEAMS 2 (LH/RH)
Work Zones and Access Panels
Zone
 Access/Work location
532
 Access
 Door 575FB
Panel AL
Work location
 Panel 133VU
632
 Access
 Door 675FB
Panel AR
Work location
 Panel 133VU
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 13
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 22

@A300-600
SERVICE BULLETIN
Manpower Resources
Manhours
 2.00
Minimum number of person
 1
Subtask elapsed time
 2.00
Skills
 AIRFRAME
References
Non Destructive Test Manual (NTM)
 57-20-11 Part 4, Procedure A
57-20-11 Part 4, Procedure B
Fig. A-UBAAA
FLAP TRACK 2 SIDE MEMBER
ASSEMBLY
Sheet 01
Fig. A-UCAAA
FLAP TRACK 2 BASE MEMBER
ASSEMBLY
Sheet 01
Fig. A-UDAAA
FLAP TRACK 2 SIDE MEMBER
ASSEMBLY AREA OF INSPECTION
Sheet 01
Fig. A-UEAAA
SECTION THROUGH FLAP BEAM 2
ASSEMBLY
Sheet 01
Fig. A-UFAAA
FLOWCHART
Sheet 01
Refer to Fig. A-UFAAA Sheet 01
 for the ultrasonic inspection procedure.
(a) Do an ultrasonic inspection of the steel base member of the flap beam 2 for cracks
that extend from the bolt holes (Refer to NTM 57-20-11 Part 4, Procedure A, Fig.
A-UBAAA Sheet 01
 , Fig. A-UCAAA Sheet 01
 , Fig. A-UDAAA Sheet 01
 and Fig. A-
UEAAA S heet 01
 ).
(b) Do an ultrasonic inspection of the aluminium side members of the flap beam 2 for
cracks that extend from the bolt holes (Refer to NTM 57-20-11 Part 4, Procedure B,
Fig. A-UBAAA Sheet 01
 , Fig. A-UCAAA Sheet 01
 , Fig. A-UDAAA Sheet 01
 and Fig.
A-UEAAA Sheet 01
 ).
(c) If cracks are found in either of the side members or the base member that are to
the edge, or extend as much as 4.0 mm (0.157 in.) beyond the bolt hole, a repeat
inspection must be done every 250 FC.
(d) If cracks are found in either of the side members or the base member that are
more than 4.0 mm (0.157 in.) beyond the bolt hole, the flap beam must be replaced
before the next flight.
(e) If no cracks are found, refer to SUBTASK 576005-942-401 001 CLOSE-UP .
(f) All inspection results, including nil findings, should be sent to AIRBUS with a copy
of Fig. A-UCAAA Sheet 01
 as a reporting form.
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 14
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 23

@A300-600
SERVICE BULLETIN
D. TEST
None
E. CLOSE-UP
(1) Subtask 576005-942-401-001 - CLOSE-UP
Work Zones and Access Panels
Zone
 Access/Work location
532
 Access
 Door 575FB, Door AL
Work location
 Panel 133VU
632
 Access
 Door 675FB, Door AR
Work location
 Panel 133VU
Manpower Resources
Skills
 AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 27-50-00, Page Block 301
27-50-21, Page Block 401
57-20-35, Page Block 401
(a) Install the moveable fairings on flap beam 2 (Refer to AMM 27-50-21, Page Block
401).
(b) Fully retract the flaps (Refer to AMM 27-50-00, Page Block 301).
(c) Install the fixed fairings on flap beam 2 (Refer to AMM 57-20-35, Page Block 401).
(d) Restore the systems and the aircr aft to the normal operating conditions.
(e) Report all findings, including nil finding to AIRBUS on the form provided in this
Service Bulletin.
(f) Remove the access platforms from flap beam 2 area.
(g) Make sure that the work areas are clean and clear of tools and other items of
equipment.
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 15
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 24

@A300-600
SERVICE BULLETIN
**CONF ALL
AREA OF INSPECTION
AREA OF INSPECTION
FOR DETAILS SEE A−UCAAA
D_SB_576005_7_BAAA_01_00
AZ532 (Z632)
FWD
C/L
DUPLEX
DRIVE
LH SHOWN
RH SIMILAR
A
A
A
AREA OF INSPECTION
FOR DETAILS SEE A−UCAAA
A A
Figure A-U BAAA - S heet 01
FLAP TRACK 2 SIDE MEMBER ASSEMBLY
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 16
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 25

@A300-600
SERVICE BULLETIN
**CONF ALL
A
Z532 (Z632)
A
B
LH SHOWN
RH SIMILAR
TYPICAL
CRACK PROPOGATION
DIRECTION OF
F
W
D
VIEW ON UNDERSIDE OF
FLAP BEAM 2 ASSEMBLY
NOTE:
RECORD THE CRACK POSITIONS AND LENGTHS01
01
IN BASE MEMBERS ON THIS FIGURE AND RETURN
THE INFORMATION BACK TO AIRBUS. D_SB_576005_7_CAAA_01_00
B
B
Figure A-UCAAA - Sheet 01
FLAP TRACK 2 BASE MEMBER ASSEMBLY
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 17
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 26

@A300-600
SERVICE BULLETIN
**CONF ALL
B
TYPICAL
CRACK PROPOGATION
AZ532 (Z632)
A
B
D_SB_576005_7_DAAA_01_00
LH SHOWN
RH SIMILAR
DIRECTION OF
Figure A-UDAAA - Sheet 01
FLAP TRACK 2 SIDE MEMBER ASSEMBLY AREA OF INSPECTION
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 18
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 27

@A300-600
SERVICE BULLETIN
**CONF ALL
LIGHT ALLOY
SIDE MEMBER
STEEL
STRAPS STEELSTRAPS
STEEL
BASE MEMBER
SECTION THROUGH FLAP BEAM 2 ASSEMBLY
THE LOWER HALF OF THE FLAP BEAM STRUCTURE CONSTITUTES A TENSION BOOM
ASSEMBLY MADE FROM THE FOLLOWING ELEMENTS: TWO LIGHT ALLOY SIDE MEMBERS,
A STEEL BASE MEMBER AND FOUR STEEL STRAPS, TWO EACH SIDE AS ILLUSTRATED ABOVE.
WHEN CRACKS ARE FOUND THE FOLLOWING LIMITATIONS APPLY:
DESCRIPTION REPEAT INSPECTIONS
A CRACK IN EITHER SIDE MEMBER
OR BASE MEMBER TO EDGE OR UP TO
4.000 mm (0.157 in) BEYOND BOLT HOLE.
CRACK IN EITHER SIDE MEMBER
OR BASE MEMBER GREATER THAN
4.000 mm (0.157 in) BEYOND BOLT HOLE.
250 FLIGHTS
REPLACE IMMEDIATELY
1.
2.
LIGHT ALLOY
SIDE MEMBER
D_SB_576005_7_EAAA_01_00
Figure A-U EAAA - S heet 01
SECTION THROUGH FLAP BEAM 2 ASSEMBLY
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 19
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 28

@A300-600
SERVICE BULLETIN
**CONF ALL
QUESTION
ACTION
FINDING
NOYES
COMPLIANCE TIMES GIVEN IN THIS SERVICE BULLETIN.
AND COMPLIANCE PARAGRAPHS AND NOT TO SERVE AS THE PRIMARY SOURCE FOR TASKS OR
NOTE:
THE PURPOSE OF FLOW CHARTS IS TO SUPPLEMENT THE INFORMATION GIVEN IN THE PROCEDURE
REPEAT INSPECTIONS AT
INTERVALS IN ACCORDANCE
D_SB_576005_7_FAAA_01_00
ULTRASONIC INSPECTION OF THE STEEL BASE MEMBER
OF THE FLAP BEAM 2 FOR CRACKS EXTENDING FROM
THE BOLT HOLES AND ULTRASONIC INSPECTION OF THE
ALUMINUM SIDE MEMBERS OF THE FLAP BEAM 2.
THRESHOLD IN ACCORDANCE WITH PARAGRAPH 1.E(2)  
ARE
THERE ANY
CRACKS?
WITH PARAGRAPH 1.E(2)
THE LENGTH
LESS THAN 4.000 mm NOYES
REPEAT INSPECTIONS
EVERY 250 FLIGHT
CYCLES
REPLACE FLAP BEAM
BEFORE NEXT FLIGHT
REPEAT INSPECTIONS AT
INTERVALS IN ACCORDANCE
WITH PARAGRAPH 1.E(2)
IS
(0.157 in) ?
Figure A-UFAAA - Sheet 01
FLOWCHART
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 20
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 29

@A300-600
SERVICE BULLETIN
REPORTING SHEET
TITLE: WINGS- FLAP BEAM 2 - INSPECTION OF FLAP BEAM BASE AND SIDE
MEMBERS.
MODIFICATION No.: None
Please complete the appropriate item (A or B):
A - SB WILL BE
 embodied YES/NO (if NO please comment)
If YES, aircraft concer ned (as per SB effectivity by default) and planned dates (month/year) of
embodiment:
B - SB HAS BEEN
 embodied on aircraft:
Operator comments:
From Airline:
Name/Title:
Signature: Date:
If operational documentation is affected (see Paragraph 1.K of this SB): If information is needed prior to
next normal revision or prior to SB embodiment, please indicate required service(s):
Either: Modification Operational Impact (MOI), if available YES/NO
Or : Intermediate revision YES/NO
Important Information:
 This SB will only be incorporated in your maintenance and operational
documentation if this sheet is returned to Airbus and signed by a duly authorised representative. With
the next feasible revision, this will result in
- Updating of maintenance documentation to show pre and post SB data.
- Updating of maintenance and operational documentation to show post SB data after embodiment.
If this SB requires previous or simultaneous accomplishment of other SBs, Airbus shall automatically
include them in the manual revisions. Refer to SIL 00-037 for detailed information.
Please return this completed sheet to:
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Attn: SDC32 Technical Data and Documentation Services
F A X :( + 3 3 )56 19 32 80 6
e-mail: sb.reporting@airbus.com
or via your Resident Customer Support Office.
Alternatively, SB lists via letters or fax are also accepted.
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 30

@A300-600
SERVICE BULLETIN
QUALITY PERCEPTION FORM
Use this form to tell us what is your perception of the quality of this Service Bulletin. The reported data
that you provide us will be used to analyse areas of difficulties and to take corrective action to further
improve the quality of our Service Bulletins.
We thank you for the time you have taken in completing this form.
(Please rate on a scale of 1 to 4, with 4 being the highest score)
- Quality rating of this SB 4321
- Quality rating of the Accomplishment Instructions 4321
- Quality rating of the Illustrations 4321
- Is this SB easy to understand ? Y/N
If you have had difficulties in the accomplishment of this SB please quote below the area(s) and give a
short description of the issue.
Planning Material Instructions
X Effectivity X Kit content X Preparation
X Reason X List of Materials Operator Supplied X Mod/Inspection
X Manpower X Industry support X Test
X References X Re-identification X Close-Up
X Publication X Tooling X Illustrations
Comments:
Operator: Date:
Name/Title:
Please return this form to:
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX FRANCE
Attn : SEM4 Service Bulletins Management
F A X:( 3 3 )56 19 34 25 1
Or via your Resident Customer Support Office.
DATE: Aug 18/86 SERVICE BULLETIN No.: A300-57-6005
REVISION No.: 06 - Nov 14/13 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
