# Airbus Service Bulletin 92-1049-01

Copy: No revision named ("SB_92_1049_01"), 78 pages: PDF https://openairdocs.org/files/sha256/8d/6a/8d6a81a10ef44e4a24757208d38a0f5d46a9e07835f0be74cd71086de4b47ad5; text https://openairdocs.org/service-documents/airbus/sb-92-1049-01/file/8d6a81a10ef4.md. Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2016-5591, the docket of AD 2016-19-02. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Airbus](https://openairdocs.org/service-documents/airbus.md)
- Type: Service bulletin (Service Bulletin)
- Number: 92-1049-01
- Page: https://openairdocs.org/service-documents/airbus/sb-92-1049-01

## Text (78 pages)

Rights: © Airbus S.A.S. Filed by the FAA in regulations.gov docket FAA-2016-5591, the docket of AD 2016-19-02. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

@A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
ATA SYSTEM: 92
TITLE: ELECTRIC AND ELECTRONIC COMMON INSTALLATION - ADD ANTI-
CHAFING PROTECTION AT RACEWAY GAPS
MODIFICATION No.: 37504J2648
This page transmits Revision No.01 of Service Bulletin No.A320-92-1049
ADDITIONAL WORK
**CONF ALL
No additional work is required by this revision for aircraft modified by any previous issue.
REASON
Revision 01 issued to delete all references to modification of the leading edge raceways (as no CF
cables were installed in leading edge raceways), Revision 01 now only addresses the trailing edge and
wing tip raceways. The Weight and Balance and Material Information is amended accordingly.
The opportunity is taken to update the aircraft effectivity.
CHANGES
SUMMARY
MODIFICATIONS
 Minor editorial or document structure change
 N
REASON/DESCRIPTION/OPERATIONAL
CONSEQUENCES
Reference to leading edge raceways deleted
 N
GENERAL EVALUATION
 Minor editorial or document structure change
 N
MATERIAL PRICE INFORMATION
 Minor editorial or document structure change
 N
Minor editorial or document structure change
 N
Minor editorial or document structure change
 N
EFFECTIVITY
 Minor editorial or document structure change
 N
CONCURRENT REQUIREMENTS
 Minor editorial or document structure change
 N
REFERENCES / REPERCUSSIONS
 Minor editorial or document structure change
 N
NATURE OF THE WORK
 Minor editorial or document structure change
 N
MANPOWER
 Minor editorial or document structure change
 N
Minor editorial or document structure change
 N
Minor editorial or document structure change
 N
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 2

@A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
APPENDICES
 Minor editorial or document structure change
 N
Fig. A-USAAA
 Minor editorial or document structure change
 N
Fig. A-USAAA Sheet 01
 Minor editorial or document structure change
 N
PLANNING INFORMATION
EFFECTIVITY
 Effectivity updated
 N
Configuration definition
 Minor editorial or document structure change
 N
CONF 001
 Minor editorial or document structure change
 N
CONF 002
 Minor editorial or document structure change
 N
CONF 003
 Minor editorial or document structure change
 N
Material Effectivity
 Minor editorial or document structure change
 N
Minor editorial or document structure change
 N
Minor editorial or document structure change
 N
Minor editorial or document structure change
 N
CONCURRENT REQUIREMENTS
 Minor editorial or document structure change
 N
Minor editorial or document structure change
 N
REASON
 Minor editorial or document structure change
 N
History
 Minor editorial or document structure change
 N
Objective/Action
 Reference to leading edge raceways deleted
 N
Advantages
 Minor editorial or document structure change
 N
Operational/Maintenance
Consequences
Minor editorial or document structure change
 N
DESCRIPTION
 Reference to leading edge raceways deleted
 N
COMPLIANCE
 Minor editorial or document structure change
 N
Classification
 Minor editorial or document structure change
 N
Accomplishment Timescale
 Minor editorial or document structure change
 N
APPROVAL
 Approval standard sentence updated
 N
Minor editorial or document structure change
 N
MANPOWER
 Manhours adjusted to allow for deletion of leading
edge raceways
N
Minor editorial or document structure change
 N
Minor editorial or document structure change
 N
Minor editorial or document structure change
 N
WEIGHT AND BALANCE
 Weight & Balance updated and standard sentence
added
N
Minor editorial or document structure change
 N
ELECTRICAL LOAD DATA
 Minor editorial or document structure change
 N
REFERENCES
 WBM and SB reference added
 N
Minor editorial or document structure change
 N
Minor editorial or document structure change
 N
Minor editorial or document structure change
 N
PUBLICATION AFFECTED
 Minor editorial or document structure change
 N
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 3

@A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
Minor editorial or document structure change
 N
INTERCHANGEABILITY/MIXABILITY
 Minor editorial or document structure change
 N
SPARES
 Minor editorial or document structure change
 N
MATERIAL INFORMATION
MATERIAL - PRICE AND AVAILABILITY
 Minor editorial or document structure change
 N
Procurement Addresses
 Address updated
 N
Price and Availability
 Price and availability updated
 N
INDUSTRY SUPPORT INFORMATION
 Industry Support Information updated
 N
LIST OF COMPONENTS
 Kits B01 and B02 raised to revision 02
 N
Kit 921049B01R02
 Minor editorial or document structure change
 N
Kit 921049B02R02
 Minor editorial or document structure change
 N
LIST OF MATERIALS - OPERATOR
SUPPLIED
Minor editorial or document structure change
 N
PARTS TO BE RE-IDENTIFIED BY
OPERATOR
Minor editorial or document structure change
 N
TOOLING
 Minor editorial or document structure change
 N
ACCOMPLISHMENT INSTRUCTIONS
TASK 921049- 831-895-001-
MODIFICATION
Installation of Protective Strips to leading edge
deleted
N
Task associated data - 001
 Minor editorial or document structure change
 N
Task associated data - 002
 Minor editorial or document structure change
 N
Task associated data - 003
 Minor editorial or document structure change
 N
Subtask 921049-910-401-001
 Standard Practice references added for tie-wraps
and for wing panel zone location
N
Subtask 921049-839-401-001
 Minor editorial or document structure change
 N
Subtask 921049-910-401-001
 Standard Practice references added for tie-wraps
and for wing panel zone location
N
Subtask 921049-839-401-001
 Minor editorial or document structure change
 N
Subtask 921049-910-401-001
 Standard Practice references added for tie-wraps
and for wing panel zone location
N
Subtask 921049-839-401-001
 Minor editorial or document structure change
 N
Subtask 921049-941-401-001
 Removal of leading edge access panels deleted
 N
Subtask 921049-941-401-001
 Removal of leading edge access panels deleted
 N
Subtask 921049-941-401-002
 Removal of leading edge access panels deleted
 N
Subtask 921049-831-408-001
 NOTE added to clarify the installation of the
protective strip at positions where SB A320-24-1062
has been accomplished
N
Subtask 921049-831-409-001
 Minor editorial or document structure change
 N
Subtask 921049-831-410-001
 NOTE added to clarify the installation of the
protective strip at positions where SB A320-24-1062
has been accomplished
N
Subtask 921049-831-411-001
 Minor editorial or document structure change
 N
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 4

@A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
Subtask 921049-831-414-001
 NOTE added to clarify the installation of the
protective strip at positions where SB A320-24-1062
has been accomplished
N
Subtask 921049-831-415-001
 Minor editorial or document structure change
 N
Subtask 921049-831-408-002
 NOTE added to clarify the installation of the
protective strip at positions where SB A320-24-1062
has been accomplished
N
Subtask 921049-831-409-002
 Minor editorial or document structure change
 N
Subtask 921049-831-410-002
 NOTE added to clarify the installation of the
protective strip at positions where SB A320-24-1062
has been accomplished
N
Subtask 921049-831-411-002
 Minor editorial or document structure change
 N
Subtask 921049-831-414-003
 NOTE added to clarify the installation of the
protective strip at positions where SB A320-24-1062
has been accomplished
N
Subtask 921049-831-415-003
 Minor editorial or document structure change
 N
Subtask 921049-831-408-002
 NOTE added to clarify the installation of the
protective strip at positions where SB A320-24-1062
has been accomplished
N
Subtask 921049-831-409-002
 Minor editorial or document structure change
 N
Subtask 921049-831-410-002
 NOTE added to clarify the installation of the
protective strip at positions where SB A320-24-1062
has been accomplished
N
Subtask 921049-831-411-002
 Minor editorial or document structure change
 N
Subtask 921049-942-401-001
 Installation of leading edge access panels deleted
 N
Subtask 921049-942-401-001
 Installation of leading edge access panels deleted
 N
Subtask 921049-942-401-002
 Installation of leading edge access panels deleted
 N
Fig. A-UBAAA
 Minor editorial or document structure change
 N
Fig. A-UBAAA Sheet 01
 Minor editorial or document structure change
 N
Fig. A-UBAAB
 Minor editorial or document structure change
 N
Fig. A-UBAAB Sheet 01
 Minor editorial or document structure change
 N
Fig. A-UBBAA
 Minor editorial or document structure change
 N
Fig. A-UBBAA Sheet 01
 Minor editorial or document structure change
 N
Fig. A-UBBAA Sheet 02
 Minor editorial or document structure change
 N
Fig. A-UBBAA Sheet 03
 Minor editorial or document structure change
 N
Fig. A-UBBAA Sheet 04
 Minor editorial or document structure change
 N
Fig. A-UBBAA Sheet 05
 Minor editorial or document structure change
 N
Fig. A-UBBAB
 Minor editorial or document structure change
 N
Fig. A-UBBAB Sheet 01
 Minor editorial or document structure change
 N
Fig. A-UBBAB Sheet 02
 Minor editorial or document structure change
 N
Fig. A-UBBAB Sheet 03
 Minor editorial or document structure change
 N
Fig. A-UBBAB Sheet 04
 Minor editorial or document structure change
 N
Fig. A-UBCAA
 Minor editorial or document structure change
 N
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 5

@A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
Fig. A-UBCAA Sheet 01
 Minor editorial or document structure change
 N
FILLING INSTRUCTIONS
This Service Bulletin has been generated electronically and is reissued as a complete document.
Replace the complete document.
Put this Revision Transmittal Sheet in front of the Service Bulletin.
HISTORY OF PREVIOUS REVISIONS
No previous revision
REVISION SEQUENCE
ORIGINAL: Jul 23/07
REVISION No. : 01 - Nov 28/11
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 5
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 6

@A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
This Page Intentionally Left Blank
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 6
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 7

@A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
This summary is for information only and is not approved for modification of the aircraft.
ATA SYSTEM: 92
TITLE: ELECTRIC AND ELECTRONIC COMMON INSTALLATION - ADD ANTI-
CHAFING PROTECTION AT RACEWAY GAPS
**CONF ALL
MODIFICATIONS
MODIFICATION CLASSIFICATION
MAJOR
 None
MINOR
 37504J2648
NOTE
: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting the
airworthiness of the product. All other changes are major changes.
REASON/DESCRIPTION/OPERATIONAL CONSEQUENCES
There have been in-service reports of Operators experiencing wire chafing in the raceways which
resulted in short circuits. Investigation has established that the wire chafings, initiated at raceway gaps,
were either due to maintenance operations or due to structure vibrations. The aircraft that are affected
have CF type cable installed in the trailing edge (Pre Mod. No. 22626J0827).
Aircraft that are Post Mod. No. 22626J0827, have the more robust DK type of cable and are not
affected.
There are two standards of raceway installed. Modification 20609J0261 introduced a raceway
constructed of an extruded section with support brackets.
SIL 92-003 has been published to provide guidance for the inspection of electrical installations in the
wing leading and trailing edges.
This Service Bulletin introduces Protective Strips to be installed at all raceway gaps and exits in the
trailing edge and wing tip. This Service Bulletin is only applicable to aircraft that are Pre Mod. No.
22626J0827.
Accomplishment of this Service Bulletin will give increased protection to the cables at the raceway gaps
and therefore prevent short circuits and potential arc tracking caused by damaged cables.
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 8

@A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
GENERAL EVALUATION
EVALUATION TABLE
COMPLIANCE
 RECOMMENDED (1)
 CANCELS INSPECTION SB
 NO
POTENTIAL AD
 NO
 A/C OPERATION AFFECTED
 NO
RELIABILITY AFFECTED
 NO
 PAX COMFORT AFFECTED
 NO
COST SAVING
 NO
 ETOPS AFFECTED
 NO
STRUCTURAL LIFE EXTN
 NO
 VENDOR SB INVOLVED
 NO
NOTE
 (1)
: Service Bulletin recommended to be accomplished to prevent significant operational
disruptions.
MATERIAL PRICE INFORMATION
**CONF 001
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Kit 921049B01R02
 2
 13,000.00
 Protective Strips, Protective Sleeves, Tie-
wraps
**CONF 002
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Kit 921049B02R02
 2
 11,320.00
 Protective Strips, Protective Sleeves, Tie-
wraps
**CONF 003
MATERIAL PRICE INFORMATION TABLE
MATERIAL SET
 QTY PER
A/C
PRICE PER
A/C (USD)
MAIN PARTS
Kit 921049B02R02
 2
 11,320.00
 Protective Strips, Protective Sleeves, Tie-
wraps
EFFECTIVITY
**CONF ALL
This Service Bulletin is applicable to this (these) operator(s) :
83V 86Z AAF AAN ACA ADR AEU AFR AHY ANA ART AWW B2V
BAW BGH BIE BTV C9G CTN CYP D2F DAL DLH ETJ F2I FHY
FPY HEJ IAC IBE IRA JAV JET KAC KPS LBT MLD MMA MSR
MXA SHY SKU SOL STZ SVR SWE TAM TAR UDC USA VLG XLF
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 9

@A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
CONCURRENT REQUIREMENTS
The prior or simultaneous accomplishment of the Service Bulletin that follows is recommended:
Service Bulletin No. A320-24-1062
NOTE
: Service Bulletin A320-24-1062 introduces additional protection to the ’S’ routes in the
trailing edge raceways.
REFERENCES / REPERCUSSIONS
TFU
 None
OEB
 None
AOT
 None
SIL
 92-003
LINE MAINTENANCE AFFECTED
 No
LIFE LIMIT
 None
OTHER
 None
NATURE OF THE WORK
AIRCRAFT
 YES
EQUIPMENT
 NO
HARD
 NO
SOFT
 NO
OBRM
 NO
MANPOWER
**CONF 001
Task 921049-831-895-001: MODIFICATION
TOTAL MANHOURS
 38.00
ELAPSED TIME (HOURS)
 33.00
**CONF 002
Task 921049-831-895-001: MODIFICATION
TOTAL MANHOURS
 31.50
ELAPSED TIME (HOURS)
 24.00
**CONF 003
Task 921049-831-895-001: MODIFICATION
TOTAL MANHOURS
 28.00
ELAPSED TIME (HOURS)
 23.00
APPENDICES
**CONF ALL
None
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 10

@A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
**CONF ALL
PROTECTIVE STRIP
FOR RACEWAY GAPS
N_SB_921049_7_SAAA_01_00
FRONT SPAR
REAR SPAR
ZONE 574/674
RACEWAY
TRAILING EDGE
RACEWAY
RIB 27
RACEWAYS
LH WING SHOWN
RH WING SIMILAR
Figure A-USAAA - Sheet 01
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 11

@A318/A319/A320/A321
SERVICE BULLETIN
AIRBUS
CUSTOMER SERVICES DIRECTORATE
1 Rond Point Maurice Bellonte
31707 BLAGNAC CEDEX
FRANCE
T e l:( 3 3 )56 19 33 33 3
Telex : AIRBU 530526F
F a x:( 3 3 )56 19 34 25 1
ATA SYSTEM: 92
TITLE: ELECTRIC AND ELECTRONIC COMMON INSTALLATION - ADD ANTI-
CHAFING PROTECTION AT RACEWAY GAPS
MODIFICATION No.: 37504J2648
This document contains AIRBUS PROPRIETARY INFORMATION and shall at all times remain the
property of AIRBUS; no intellectual property right or licence is granted by AIRBUS in connection with
any information contained in it. It is delivered on the express condition that said document and the
information contained in it shall be treated as confidential, shall not be used for any purpose other than
that for which it is hereby delivered. It shall not be disclosed in whole or in part to third parties and shall
not be duplicated in any manner (except for the purposes of performing the tasks described hereunder
and provided that any recipient of such document shall comply with the conditions herein), without
AIRBUS prior written consent.
1. PLANNING INFORMATION
**CONF ALL
A. EFFECTIVITY
(1) Models
320-211 320-212 320-231
(2) Effectivity by MSN
0029 0039 0042-0059 0061-0078 0080-0090 0093-0097 0099 0102-0104 0109-0128
0132 0135-0155 0157-0162 0164-0176 0178-0179 0181-0183 0185-0192 0194-0224
0226-0237 0239-0270 0272-0279 0281-0303 0305-0312 0314 0316-0337 0339
(3) Effectivity by Operator
The Operator/MSN relationship is provided for information only and is correct at the time
of issue in accordance with the information available to AIRBUS. Any future changes
resulting from transfer of an aircraft from one operator to another will not be reflected in
this list unless the Service Bulletin is revised for another reason.
OPERATOR
 MSN
83V
 0226
86Z
 0164
AAF
 0244
AAN
 0299
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 1
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 12

@A318/A319/A320/A321
SERVICE BULLETIN
OPERATOR
 MSN
ACA
 0059 0068 0073 0084 0122 0126 0127 0141 0149 0150 0154 0159
0174 0175 0183 0210 0231 0232 0233 0242 0248 0253 0254 0255
0265 0277 0284 0290 0309 0324 0330
ADR
 0043
AEU
 0136
AFR
 0044 0061 0062 0063 0102 0115 0144 0145 0155 0186 0187 0214
0227 0228 0236 0237 0239 0270 0278 0285 0286 0287 0337
AHY
 0331
ANA
 0139 0151 0167 0170 0196 0212 0219 0245 0300 0328
ART
 0142 0283 0310 0311 0333
AWW
 0229
B2V
 0185 0191
BAW
 0039 0042 0103 0109 0120
BGH
 0221 0294 0305
BIE
 0293
BTV
 0168
C9G
 0246
CTN
 0258
CYP
 0256
D2F
 0211 0243 0251 0326
DAL
 0118 0121 0125 0152 0153 0160 0171 0192 0197 0206 0208 0213
0262 0263 0272 0273 0281 0282 0297 0298 0306 0307 0318 0319
0329 0339
DLH
 0069 0070 0071 0072 0078 0083 0086 0093 0094 0104 0110 0111
0116 0117 0135 0137 0147 0161 0162 0172 0200 0201 0202 0209
0216 0217 0218 0267 0268 0269
ETJ
 0325
F2I
 0128 0188
FHY
 0132 0288
FPY
 0112
HEJ
 0087 0088
IAC
 0045 0046 0047 0048 0049 0050 0051 0056 0057 0058 0074 0075
0080 0089 0090 0095 0096 0097 0247 0257 0308 0314 0327 0336
IBE
 0176 0207 0223 0274
IRA
 0303 0312
JAV
 0029
JET
 0204 0215
KAC
 0181 0182 0195
KPS
 0234
LBT
 0222 0301
MLD
 0249
MMA
 0113 0114 0295 0316
MSR
 0165 0166 0178 0194 0198 0322
MXA
 0252 0259 0260 0261 0275 0276 0291 0292 0296 0320 0321 0332
SHY
 0138 0148
SKU
 0179
SOL
 0302
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 2
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 13

@A318/A319/A320/A321
SERVICE BULLETIN
OPERATOR
 MSN
STZ
 0190 0279
SVR
 0140 0157 0203 0220
SWE
 0169 0289
TAM
 0250 0334 0335
TAR
 0119 0123 0124 0205
UDC
 0085 0230 0235
USA
 0052 0053 0054 0055 0064 0065 0066 0067 0076 0077 0081 0082
0099 0317
VLG
 0143 0146 0158 0173 0199 0224 0240 0241 0264 0266 0323
XLF
 0189
(4) Configuration by MSN
MSN
 CONFIGURATION
0029 0039 0042 0043 0044 0045 0046 0047 0048 0049 0050
0051 0052 0053 0054 0055 0056 0057 0058 0059
001
0061 0062 0063 0064 0065 0066 0067 0068 0069 0070 0071
0072 0073 0074 0075 0076 0077 0078 0080 0081 0082 0083
0084 0085 0086 0087 0088 0089 0090 0093 0094 0095 0096
0097 0099 0102 0103 0104 0109 0110 0111 0112 0113 0114
0115 0116 0117 0118 0119 0120 0121 0122 0123 0124 0125
0126 0127 0128 0132 0135 0136 0137 0138 0139 0140 0141
0142 0143 0144 0145 0146 0147 0148 0149 0150 0151 0152
0153 0154 0155 0157 0158 0159 0160 0161 0162 0164 0165
0166 0167 0168 0169 0170 0171 0172 0173 0174 0175 0176
0178 0179 0181 0182 0183 0185 0186 0187 0188 0189 0190
0191 0192 0194 0195 0196 0197 0198 0199 0200 0201 0202
0203 0204 0205 0206 0207 0208 0209 0210 0211 0212 0213
0214 0215 0216 0217 0218 0219
002
0220 0221 0222 0223 0224 0226 0227 0228 0229 0230 0231
0232 0233 0234 0235 0236 0237 0239 0240 0241 0242 0243
0244 0245 0246 0247 0248 0249 0250 0251 0252 0253 0254
0255 0256 0257 0258 0259 0260 0261 0262 0263 0264 0265
0266 0267 0268 0269 0270 0272 0273 0274 0275 0276 0277
0278 0279 0281 0282 0283 0284 0285 0286 0287 0288 0289
0290 0291 0292 0293 0294 0295 0296 0297 0298 0299 0300
0301 0302 0303 0305 0306 0307 0308 0309 0310 0311 0312
0314 0316 0317 0318 0319 0320 0321 0322 0323 0324 0325
0326 0327 0328 0329 0330 0331 0332 0333 0334 0335 0336
0337 0339
003
(5) Configuration definition
**CONF 001
Config. 001 is valid for aircraft on which Modification No. 20609J0261 and Modification
No. 21814J0617 are not embodied.
**CONF 002
Config. 002 is valid for aircraft on which Modification No. 20609J0261 is embodied and
on which Modification No. 21814J0617 is not embodied.
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 3
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 14

@A318/A319/A320/A321
SERVICE BULLETIN
**CONF 003
Config. 003 is valid for aircraft on which Modification No. 20609J0261 and Modification
No. 21814J0617 are embodied.
(6) Material Effectivity
**CONF 001
MATERIAL
 QTY PER A/C
 SEE NOTES
Kit 921049B01R02
 2
**CONF 002
MATERIAL
 QTY PER A/C
 SEE NOTES
Kit 921049B02R02
 2
**CONF 003
MATERIAL
 QTY PER A/C
 SEE NOTES
Kit 921049B02R02
 2
**CONF ALL
B. CONCURRENT REQUIREMENTS
The prior or simultaneous accomplishment of the Service Bulletin that follows is
recommended:
Service Bulletin No. A320-24-1062
NOTE
: Service Bulletin A320-24-1062 introduces additional protection to the ’S’
routes in the trailing edge raceways.
C. REASON
(1) History
There have been in-service reports of Operators experiencing wire chafing in the
raceways which resulted in short circuits. Investigation has established that the wire
chafings, initiated at raceway gaps, were either due to maintenance operations or due to
structure vibrations. The aircraft that are affected have CF type cable installed in the
trailing edge (Pre Mod. No. 22626J0827).
Aircraft that are Post Mod. No. 22626J0827, have the more robust DK type of cable and
are not affected.
There are two standards of raceway installed. Modification 20609J0261 introduced a
raceway constructed of an extruded section with support brackets.
SIL 92-003 has been published to provide guidance for the inspection of electrical
installations in the wing leading and trailing edges.
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 4
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 15

@A318/A319/A320/A321
SERVICE BULLETIN
(2) Objective/Action
This Service Bulletin introduces Protective Strips to be installed at all raceway gaps and
exits in the trailing edge and wing tip. This Service Bulletin is only applicable to aircraft
that are Pre Mod. No. 22626J0827.
(3) Advantages
Accomplishment of this Service Bulletin will give increased protection to the cables at the
raceway gaps and therefore prevent short circuits and potential arc tracking caused by
damaged cables.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to :
**CONF 001
Task 921049-831-895-001: MODIFICATION
(1) Install Protective Strips at the Raceway Gaps on Rib 27 (Wing Tip)
(2) Install Protective Sleeves at the Raceway Exits on Rib 27 (Wing Tip)
(3) Install Protective Strips at the Raceway Gaps on the Trailing Edge
(4) Install Protective Sleeves at the Raceway Exits on the Trailing Edge
(5) Install Protective Strips at the Raceway Gaps in Zone 574/674
(6) Install Protective Sleeves at the Raceway Exits in Zone 574/674
**CONF 002
Task 921049-831-895-001: MODIFICATION
(1) Install Protective Strips at the Raceway Gaps on Rib 27 (Wing Tip)
(2) Install Protective Sleeves at the Raceway Exits on Rib 27 (Wing Tip)
(3) Install Protective Strips at the Raceway Gaps on the Trailing Edge
(4) Install Protective Sleeves at the Raceway Exits on the Trailing Edge
(5) Install Protective Strips at the Raceway Gaps in Zone 574/674
(6) Install Protective Sleeves at the Raceway Exits in Zone 574/674
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 5
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 16

@A318/A319/A320/A321
SERVICE BULLETIN
**CONF 003
Task 921049-831-895-001: MODIFICATION
(1) Install Protective Strips at the Raceway Gaps on Rib 27 (Wing Tip)
(2) Install Protective Sleeves at the Raceway Exits on Rib 27 (Wing Tip)
(3) Install Protective Strips at the Raceway Gaps on the Trailing Edge
(4) Install Protective Sleeves at the Raceway Exits on the Trailing Edge
**CONF ALL
E. COMPLIANCE
(1) Classification
RECOMMENDED: Service Bulletin recommended to be accomplished to prevent
significant operational disruptions.
(2) Accomplishment Timescale
Accomplishment of this Service Bulletin is recommended at the earliest opportunity
where manpower and facilities are available.
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organization Approval No. EASA.21J.031.
If an aircraft listed in the effectivity has a modification or repair embodied that is not of
AIRBUS origin, and which affects the content of this Service Bulletin, the operator is
responsible for obtaining approval by its airworthiness authority for any adaptation necessary
before incorporation of the Service Bulletin.
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also not
included.
**CONF 001
Task 921049-831-895-001: MODIFICATION
Get Access
 6.00
On Aircraft
Install Protective Strips at the Raceway Gaps on Rib
27 (Wing Tip)
1.00
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 6
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 17

@A318/A319/A320/A321
SERVICE BULLETIN
Task 921049-831-895-001: MODIFICATION
Install Protective Sleeves at the Raceway Exits on Rib
27 (Wing Tip)
1.00
Install Protective Strips at the Raceway Gaps on the
Trailing Edge
20.00
Install Protective Sleeves at the Raceway Exits on the
Trailing Edge
1.50
Install Protective Strips at the Raceway Gaps in Zone
574/674
1.00
Install Protective Sleeves at the Raceway Exits in Zone
574/674
1.50
Tests
 0.00
Close-Up
 6.00
TOTAL MANHOURS
 38.00
ELAPSED TIME (HOURS)
 33.00
**CONF 002
Task 921049-831-895-001: MODIFICATION
Get Access
 6.00
On Aircraft
Install Protective Strips at the Raceway Gaps on Rib
27 (Wing Tip)
1.00
Install Protective Sleeves at the Raceway Exits on Rib
27 (Wing Tip)
0.50
Install Protective Strips at the Raceway Gaps on the
Trailing Edge
14.00
Install Protective Sleeves at the Raceway Exits on the
Trailing Edge
1.50
Install Protective Strips at the Raceway Gaps in Zone
574/674
1.00
Install Protective Sleeves at the Raceway Exits in Zone
574/674
1.50
Tests
 0.00
Close-Up
 6.00
TOTAL MANHOURS
 31.50
ELAPSED TIME (HOURS)
 24.00
**CONF 003
Task 921049-831-895-001: MODIFICATION
Get Access
 5.50
On Aircraft
Install Protective Strips at the Raceway Gaps on Rib
27 (Wing Tip)
1.00
Install Protective Sleeves at the Raceway Exits on Rib
27 (Wing Tip)
0.50
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 7
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 18

@A318/A319/A320/A321
SERVICE BULLETIN
Task 921049-831-895-001: MODIFICATION
Install Protective Strips at the Raceway Gaps on the
Trailing Edge
14.00
Install Protective Sleeves at the Raceway Exits on the
Trailing Edge
1.50
Tests
 0.00
Close-Up
 5.50
TOTAL MANHOURS
 28.00
ELAPSED TIME (HOURS)
 23.00
**CONF ALL
H. WEIGHT AND BALANCE
The weight and balance estimates given in this Service Bulletin are based on the
Manufacturer’s Empty Weight (MEW) and do not include operator item’s. For the definition of
MEW and operator’s items refer to Weight and Balance Manual (WBM) Chapter 1-00-07.
Manufacturers Empty Weight +0.90 KG (+1.9841 LB)
Effect on Balance +19.80 KGM (+143.213 LB.FT )
I. ELECTRICAL LOAD DATA
Not Changed
J. REFERENCES
**CONF 001
Aircraft Maintenance Manual (AMM)
 06-41-57 24-41-00 27-50-00
27-60-00 57-31-21 57-51-37
Elec. Std. Practices Manual (ESPM)
 20-33-10 20-33-30 20-33-33
20-33-43 20-33-44 20-53-00
20-55-00
Service Bulletin (SB)
 A320-24-1062
Service Information Letter (SIL)
 SIL 92-003
Standards Manual (SM)
Weight and Balance Manual (WBM)
 Chapter 1-00-07
**CONF 002
Aircraft Maintenance Manual (AMM)
 06-41-57 24-41-00 27-50-00
27-60-00 57-31-21 57-51-37
Elec. Std. Practices Manual (ESPM)
 20-33-10 20-33-30 20-33-33
20-33-43 20-33-44 20-53-00
20-55-00
Service Bulletin (SB)
 A320-24-1062
Service Information Letter (SIL)
 SIL 92-003
Standards Manual (SM)
Weight and Balance Manual (WBM)
 Chapter 1-00-07
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 8
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 19

@A318/A319/A320/A321
SERVICE BULLETIN
**CONF 003
Aircraft Maintenance Manual (AMM)
 06-41-57 24-41-00 27-50-00
27-60-00 57-31-21 57-51-37
Elec. Std. Practices Manual (ESPM)
 20-33-10 20-33-30 20-33-33
20-33-43 20-33-44 20-53-00
20-55-00
Service Bulletin (SB)
 A320-24-1062
Service Information Letter (SIL)
 SIL 92-003
Standards Manual (SM)
Weight and Balance Manual (WBM)
 Chapter 1-00-07
**CONF ALL
K. PUBLICATION AFFECTED
Illustrated Parts Catalog (IPC)
 24-92-05
L. INTERCHANGEABILITY/MIXABILITY
Not Applicable
M. SPARES
None
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 9
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 20

@A318/A319/A320/A321
SERVICE BULLETIN
This Page Intentionally Left Blank
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 10
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 21

@A318/A319/A320/A321
SERVICE BULLETIN
2. MATERIAL INFORMATION
**CONF ALL
A. MATERIAL - PRICE AND AVAILABILITY
(1) Procurement Addresses
Customers with aircraft shown in the effectivity of this Service Bulletin should send a
purchase order to AIRBUS. Quote the number of this Service Bulletin. The address is:
AIRBUS
Material, Logistics and Suppliers
Weg beim Jaeger 150
D-22335 HAMBURG
GERMANY
For ordering by internet : http://spares.airbus.com
For ordering by fax: +49 40 50 76 25 90
For ordering by E-mail: airbus.kit@airbus.com
(2) Price and Availability
Kit 921049B01R02
Cost
 6,500.00 USD
Availability
 90 calendar days from receipt of order
The Kit availability given above is the standard lead time from the date of your purchase
order. If you require the Kit(s) before this time, please include a retrofit planning
schedule with your order so that we can try to comply with your requirements.
The sales terms (costs and availability) are estimated in relation to economic conditions
at the issue date of the Service Bulletin.
Kit 921049B02R02
Cost
 5,660.00 USD
Availability
 90 calendar days from receipt of order
The Kit availability given above is the standard lead time from the date of your purchase
order. If you require the Kit(s) before this time, please include a retrofit planning
schedule with your order so that we can try to comply with your requirements.
The sales terms (costs and availability) are estimated in relation to economic conditions
at the issue date of the Service Bulletin.
B. INDUSTRY SUPPORT INFORMATION
AIRBUS will not provide industry support for accomplishment of this Service Bulletin.
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 11
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 22

@A318/A319/A320/A321
SERVICE BULLETIN
C. LIST OF COMPONENTS
Kit 921049B01R02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 ITEM
 OLD PART N˚
 INT
 SEE
NOTES
1
 ABS5252F01
 184
 Protective
Strip
2
 EN6049-006-13-5
 32
 Sleeve
3
 NSA935401-05
 64
 Tie
NOTE
: If you find part numbers of hardware components in the related kit(s) which
you cannot identify in the LIST OF COMPONENTS of this Service Bulletin,
refer to Standards Manual (SM). The SM will give you the correct part number
to part number relationship.
Kit 921049B02R02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 ITEM
 OLD PART N˚
 INT
 SEE
NOTES
1
 ABS5252F01
 158
 Protective
Strip
2
 EN6049-006-13-5
 28
 Sleeve
3
 NSA935401-05
 56
 Tie
NOTE
: If you find part numbers of hardware components in the related kit(s) which
you cannot identify in the LIST OF COMPONENTS of this Service Bulletin,
refer to Standards Manual (SM). The SM will give you the correct part number
to part number relationship.
D. LIST OF MATERIALS - OPERATOR SUPPLIED
None
E. PARTS TO BE RE-IDENTIFIED BY OPERATOR
None
F. TOOLING
None
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 12
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 23

@A318/A319/A320/A321
SERVICE BULLETIN
3. ACCOMPLISHMENT INSTRUCTIONS
Task 921049-831-895-001 - MODIFICATION
WARNING
: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.
CAUTION
: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP
ELECTRICAL WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY
AND MECHANICALLY SERVICEABLE) . WHEN YOU DO MAINTENANCE
WORK, REPAIRS OR MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING,
COMPONENTS AND THE WORK AREA AS CLEAN AS POSSIBLE. TO DO
THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC; AS
NECESSARY ON WIRING AND COMPONENTS
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION
AND DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO ESPM 20-55-00.
CAUTION
: MAKE SURE THAT THE RACEWAY EXITS, CHANNELS AND WIRING ARE
CLEAN AND CLEAR OF SAND, GRIT OR OTHER ABRASIVE OR SHARP
DEBRIS THAT COULD CAUSE DAMAGE TO THE WIRING.
CAUTION
: CABLE TIES MUST NOT BE INSTALLED INTO THE RACEWAY CHANNELS.
Task Associated Data
**CONF 001
Zone
570 574 670 674
Modified FIN
574AB 575AB 674AB 675AB 574BB 575BB 674BB 675BB 575CB 675CB 575DB
675DB 575EB 675EB 573FB 575FB 673F B 675FB 575GB 675GB 575HB 675HB
575KB 675KB 575LB 675LB 575MB 675MB
Access
Panel
 573FB 574AB 574BB 575AB 575BB 575CB 575DB 575EB
575FB 575GB 575HB 575KB 575LB 575MB 673FB 674AB
674BB 675AB 675BB 675CB 675DB 675EB 675FB 675GB
675HB 675KB 675LB 675MB
Manpower
TOTAL MANHOURS
 38.00
ELAPSED TIME (HOURS)
 33.00
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 13
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 24

@A318/A319/A320/A321
SERVICE BULLETIN
**CONF 002
Zone
570 574 670 674
Modified FIN
574AB 575AB 674AB 675AB 574BB 575BB 674BB 675BB 575CB 675CB 575DB
675DB 575EB 675EB 573FB 575FB 673F B 675FB 575GB 675GB 575HB 675HB
575KB 675KB 575LB 675LB 575MB 675MB
Access
Panel
 573FB 574AB 574BB 575AB 575BB 575CB 575DB 575EB
575FB 575GB 575HB 575KB 575LB 575MB 673FB 674AB
674BB 675AB 675BB 675CB 675DB 675EB 675FB 675GB
675HB 675KB 675LB 675MB
Manpower
TOTAL MANHOURS
 31.50
ELAPSED TIME (HOURS)
 24.00
**CONF 003
Zone
570 670
Modified FIN
575AB 675AB 575BB 675BB 575CB 675CB 575DB 675DB 575EB 675EB 573FB
575FB 673FB 675FB 575GB 675GB 575HB 675HB 575KB 675KB 575LB 675LB
575MB 675MB
Access
Panel
 573FB 575AB 575BB 575CB 575DB 575EB 575FB 575GB
575HB 575KB 575LB 575MB 673FB 675AB 675BB 675CB
675DB 675EB 675FB 675GB 675HB 675KB 675LB 675MB
Manpower
TOTAL MANHOURS
 28.00
ELAPSED TIME (HOURS)
 23.00
**CONF ALL
A. GENERAL
**CONF 001
(1) Subtask 921049-910-401-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
ELECTRICAL
References
Aircraft Maintenance Manual (AMM)
 06-41-57
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 14
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 25

@A318/A319/A320/A321
SERVICE BULLETIN
References
Elec. Std. Practices Manual (ESPM)
 20-33-10
20-33-30
20-33-33
20-33-43
20-33-44
20-53-00
(a) Wiring and Routing (Refer to ESPM 20-33-10).
(b) Wiring Protection (Refer to ESPM 20-33-30).
(c) Raceway Assemblies (Refer to ESPM 20-33-43).
(d) Repair Processes (Re fer to ESPM 20-53-00).
(e) Tie-wraps (Refer to ESPM 20-33-44).
(f) Wing Panel Zone Location (Refer to AMM 06-41-57).
(g) For the installation of conduits (protective sleeves) PN EN6049-006-013-5 at
raceway exits, refer to ESPM 20-33-33.
(h) To prevent damage to electrical wiring, make sure you are careful and keep
disturbance to a minimum.
(2) Subtask 921049-839-401-001 - Administrative
Write in the applicable aircraft records that you have done all the work given in the
Service Bulletin.
**CONF 002
(1) Subtask 921049-910-401-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
ELECTRICAL
References
Aircraft Maintenance Manual (AMM)
 06-41-57
Elec. Std. Practices Manual (ESPM)
 20-33-10
20-33-30
20-33-33
20-33-43
20-33-44
20-53-00
(a) Wiring and Routing (Refer to ESPM 20-33-10).
(b) Wiring Protection (Refer to ESPM 20-33-30).
(c) Raceway Assemblies (Refer to ESPM 20-33-43).
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 15
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 26

@A318/A319/A320/A321
SERVICE BULLETIN
(d) Repair Processes (Re fer to ESPM 20-53-00).
(e) Tie-wraps (Refer to ESPM 20-33-44).
(f) Wing Panel Zone Location (Refer to AMM 06-41-57).
(g) For the installation of conduits (protective sleeves) PN EN6049-006-013-5 at
raceway exits, refer to ESPM 20-33-33.
(h) To prevent damage to electrical wiring, make sure you are careful and keep
disturbance to a minimum.
(2) Subtask 921049-839-401-001 - Administrative
Write in the applicable aircraft records that you have done all the work given in the
Service Bulletin.
**CONF 003
(1) Subtask 921049-910-401-001 - Standard Practices
Manpower Resources
Skills
 NON SPECIFIC
ELECTRICAL
References
Aircraft Maintenance Manual (AMM)
 06-41-57
Elec. Std. Practices Manual (ESPM)
 20-33-10
20-33-30
20-33-33
20-33-43
20-33-44
20-53-00
(a) Wiring and Routing (Refer to ESPM 20-33-10).
(b) Wiring Protection (Refer to ESPM 20-33-30).
(c) Raceway Assemblies (Refer to ESPM 20-33-43).
(d) Repair Processes (Re fer to ESPM 20-53-00).
(e) Tie-wraps (Refer to ESPM 20-33-44).
(f) Wing Panel Zone Location (Refer to AMM 06-41-57).
(g) For the installation of conduits (protective sleeves) PN EN6049-006-013-5 at
raceway exits, refer to ESPM 20-33-33.
(h) To prevent damage to electrical wiring, make sure you are careful and keep
disturbance to a minimum.
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 16
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 27

@A318/A319/A320/A321
SERVICE BULLETIN
(2) Subtask 921049-839-401-001 - Administrative
Write in the applicable aircraft records that you have done all the work given in the
Service Bulletin.
**CONF ALL
B. PREPARATION
**CONF 001
(1) Subtask 921049-941-401-001 - Job Set-up
Work Zones and Access Panels
Zone
 Access/Work location
570
 Access
 Panel 573FB, Panel 575AB, Panel 575BB, Panel
575CB, Panel 575DB, Panel 575EB, Panel
575FB, Panel 575GB, Panel 575HB, Panel
575LB, Panel 575MB, Panel 574AB, Panel
574BB
670
 Access
 Panel 673FB, Panel 675AB, Panel 675BB, Panel
675CB, Panel 675DB, Panel 675EB, Panel
675FB, Panel 675GB, Panel 675HB, Panel
675KB, Panel 675LB, Panel 675MB, Panel
674AB, Panel 674BB
Manpower Resources
Skills
 NON SPECIFIC
AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 Task 24-41-00-862-002
Task 27-50-00-866-008
Task 27-60-00-866-002
Task 57-31-21-000-001
Task 57-51-37-000-003
Task 57-51-37-000-004
Task 57-51-37-000-005
(a) Extend the flaps (Refer to AMM Task 27-50-00-866-008).
(b) Extend the spoilers (Refer to AMM Task 27-60-00-866-002).
(c) De-energize the aircraft electrical network (Refer to AMM Task 24-41-00-862-002).
(d) Put access platforms in position under the LH and RH wing trailing edges and wing
tips.
(e) Remove the LH and RH wing tips (Refer to AMM Task 57-31-21-000-001).
(f) Remove these panels from the LH and RH trailing edges for access:
- FINs 573FB (673FB) (Refer to AMM Task 57-51-37-000-003)
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 17
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 28

@A318/A319/A320/A321
SERVICE BULLETIN
- FINs 575AB (675AB), 575BB (675BB), 575CB (675CB), 575DB (675DB),
575EB (675EB), 575FB (675FB), 575GB (675GB) and 575HB (675HB) (Refer
to AMM Task 57-51-37-000-004)
- FINs 575KB (675KB), 575LB (675LB) and 575MB (675MB) (Refer to AMM
Task 57-51-37-000-005).
(g) Remove these panels from the inboard LH and RH wings for access:
- FINs 574AB (674AB) and 574BB (674BB).
**CONF 002
(1) Subtask 921049-941-401-001 - Job Set-up
Work Zones and Access Panels
Zone
 Access/Work location
570
 Access
 Panel 573FB, Panel 575AB, Panel 575BB, Panel
575CB, Panel 575DB, Panel 575EB, Panel
575FB, Panel 575GB, Panel 575HB, Panel
575LB, Panel 575MB, Panel 574AB, Panel
574BB
670
 Access
 Panel 673FB, Panel 675AB, Panel 675BB, Panel
675CB, Panel 675DB, Panel 675EB, Panel
675FB, Panel 675GB, Panel 675HB, Panel
675KB, Panel 675LB, Panel 675MB, Panel
674AB, Panel 674BB
Manpower Resources
Skills
 NON SPECIFIC
AIRFRAME
References
Aircraft Maintenance Manual (AMM)
 Task 24-41-00-862-002
Task 27-50-00-866-008
Task 27-60-00-866-002
Task 57-31-21-000-001
Task 57-51-37-000-003
Task 57-51-37-000-004
Task 57-51-37-000-005
(a) Extend the flaps (Refer to AMM Task 27-50-00-866-008).
(b) Extend the spoilers (Refer to AMM Task 27-60-00-866-002).
(c) De-energize the aircraft electrical network (Refer to AMM Task 24-41-00-862-002).
(d) Put access platforms in position under the LH and RH wing trailing edges and wing
tips.
(e) Remove the LH and RH wing tips (Refer to AMM Task 57-31-21-000-001).
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 18
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 29

@A318/A319/A320/A321
SERVICE BULLETIN
(f) Remove these panels from the LH and RH trailing edges for access:
- FINs 573FB (673FB) (Refer to AMM Task 57-51-37-000-003)
- FINs 575AB (675AB), 575BB (675BB), 575CB (675CB), 575DB (675DB),
575EB (675EB), 575FB (675FB), 575GB (675GB) and 575HB (675HB) (Refer
to AMM Task 57-51-37-000-004)
- FINs 575KB (675KB), 575LB (675LB) and 575MB (675MB) (Refer to AMM
Task 57-51-37-000-005).
(g) Remove these panels from the inboard LH and RH wings for access:
- FINs 574AB (674AB) and 574BB (674BB).
**CONF 003
(1) Subtask 921049-941-401-002 - Job Set-up
Work Zones and Access Panels
Zone
 Access/Work location
570
 Access
 Panel 573FB, Panel 575AB, Panel 575BB, Panel
575CB, Panel 575DB, Panel 575EB, Panel
575FB, Panel 575GB, Panel 575HB, Panel
575KB, Panel 575LB, Panel 575MB
670
 Access
 Panel 673FB, Panel 675AB, Panel 675BB, Panel
675CB, Panel 675DB, Panel 675EB, Panel
675FB, Panel 675GB, Panel 675HB, Panel
675KB, Panel 675LB, Panel 675MB
Manpower Resources
Skills
 AIRFRAME
NON SPECIFIC
References
Aircraft Maintenance Manual (AMM)
 Task 24-41-00-862-002
Task 27-50-00-866-008
Task 27-60-00-866-002
Task 57-31-21-000-001
Task 57-51-37-000-003
Task 57-51-37-000-004
Task 57-51-37-000-005
(a) Extend the flaps (Refer to AMM Task 27-50-00-866-008).
(b) Extend the spoilers (Refer to AMM Task 27-60-00-866-002).
(c) De-energize the aircraft electrical network (Refer to AMM Task 24-41-00-862-002).
(d) Put access platforms in position under the LH and RH wing trailing edges and wing
tips.
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 19
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 30

@A318/A319/A320/A321
SERVICE BULLETIN
(e) Remove the LH and RH wing tips (Refer to AMM Task 57-31-21-000-001).
(f) Remove these panels from the LH and RH trailing edges for access:
- FINs 573FB (673FB) (Refer to AMM Task 57-51-37-000-003)
- FINs 575AB (675AB), 575BB (675BB), 575CB (675CB), 575DB (675DB),
575EB (675EB), 575FB (675FB), 575GB (675GB) and 575HB (675HB) (Refer
to AMM Task 57-51-37-000-004)
- FINs 575KB (675KB), 575LB (675LB) and 575MB (675MB) (Refer to AMM
Task 57-51-37-000-005).
**CONF ALL
C. PROCEDURE
NOTE
: The worksteps that follow are applicable to the LH and RH wings.
**CONF 001
(1) Subtask 921049-831-408-001 - Install Protective Strips at the Raceway Gaps on Rib
27 (Wing Tip)
Work Zones and Access Panels
Zone
 Access/Work location
570
670
Manpower Resources
Manhours
 1.00
Minimum number of person
 2
Subtask elapsed time
 0.50
Skills
 ELECTRICAL
Material necessary to do the job
Kit 921049B01R02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 ABS5252F01
 4
 Protective Strip
References
Fig. A-UBAAA
Protective Strip Installation
Sheet 01
Fig. A-UBBAA
Raceway Gap Positions
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Sheet 05
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 20
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 31

@A318/A319/A320/A321
SERVICE BULLETIN
Refer to Fig. A-UBAAA Sheet 01
 and Fig. A-UBBAA Sheet 01
(a) At the raceway gap install one of these items around each of the four looms 1M,
2M, 1S, 2S as follows:
4 Protective Strip ABS5252F01 Item 1
NOTE
: Where harpoon ties are installed near the raceway gaps, the width
of the Protective Strip, Item 1 can be cut to the dimension to fit
between the harpoon ties.
NOTE
: Where the ’S’ routes have had insulators ABS0596 Type S or Type
U installed by SB A320-24-1062 (Mod. No. 22851J0886), the
Protective Strip, Item 1 must be installed over the insulator and the
cable-tie that attaches it.
NOTE
: If the insulator ABS0596 Type S or Type U installed by SB
A320-24-1062:
- extends fully into each raceway channel, it will not be
necessary to install the Protective Strip, Item 1 at that position
- extends into only one raceway channel or does not extend
into any raceway channel the Protective Strip, Item 1 must be
installed into the channel.
If the loom diameter is too large to allow the Protective Strip, Item 1
to be installed over the insulator in the raceway channel:
- the insulator must be removed and cut to a length where it
extends to cover only the gap between the raceways
- the insulator must be re-installed in the gap and the Protective
Strip, Item 1 must then be installed.
1
 Put the Protective Strip, Item 1 into the selected raceway channel and slide it
around the wire loom.
2
 Make sure that the Protective Strip, Item 1 is positioned equally in the center
of the raceway gap.
3
 Put the tail of the Protective Strip, Item 1 through the slot and pull the tail so
that the arrowhead goes through the slot and locks in place.
4
 Cut off the tail of the Protective Strip, Item 1.
5
 If there are insulators ABS0596 Type M installed on the ’S’ routes between the
raceways by Service Bulletin A320-24-1062 (Mod. No. 22851J0886) do this
procedure:
a
 Cut the cable tie that holds the insulator ABS0596 Type M in position on
the two ’S’ routes.
b
 Remove and retain the insulator ABS0596 Type M.
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 21
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 32

@A318/A319/A320/A321
SERVICE BULLETIN
c
 Install the two Protective Strips, Item 1 on the two ’S’ routes.
d
 Install the insulator ABS0596 Type M over the two Protective Strips, Item
1 and hold in place with a new cable tie.
e
 Make sure that the tails of the Protective Strips, Item 1 are in the open
part of the channels of the in sulator ABS0596 Type M.
(2) Subtask 921049-831-409-001 - Install Protective Sleeves at the Raceway Exits on
Rib 27 (Wing Tip)
Work Zones and Access Panels
Zone
 Access/Work location
570
670
Manpower Resources
Manhours
 1.00
Minimum number of person
 2
Subtask elapsed time
 0.50
Skills
 ELECTRICAL
Material necessary to do the job
Kit 921049B01R02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
2
 EN6049-006-13-5
 8
 Sleeve
3
 NSA935401-05
 16
 Tie
References
Fig. A-UBAAA
Protective Strip Installation
Sheet 01
Fig. A-UBBAA
Raceway Gap Positions
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Sheet 05
Refer to Fig. A-UBBAA Sheet 01
(a) At the two raceway exits install one of these items around each of the four looms
1M, 2M, 1S, 2S as follows:
8 Sleeve-Protective EN6049-006-13-5 Item 2
1
 Cut four pieces of protective sleeve to an approximate length of 100.0 mm
(4.0 in.) for each raceway exit.
2
 Wind the sleeves, Item 2 tightly around the wire looms with approximately 50.0
mm (2.0 in.) of their length in the raceway channel.
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 22
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 33

@A318/A319/A320/A321
SERVICE BULLETIN
3
 Hold the sleeves tightly in place with:
16 Tie-Cable NSA935401-05 Item 3
one in a position immediately outside of the raceway channel and one spaced
approximately 25.0 mm (1.0 in.) apart, clear of the raceway for each of the
four sleeves at each of the raceway exits.
(3) Subtask 921049-831-410-001 - Install Protective Strips at the Raceway Gaps on the
Trailing Edge
Work Zones and Access Panels
Zone
 Access/Work location
570
670
Manpower Resources
Manhours
 20.00
Minimum number of person
 2
Subtask elapsed time
 10.00
Skills
 ELECTRICAL
Material necessary to do the job
Kit 921049B01R02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 ABS5252F01
 176
 Protective Strip
References
Fig. A-UBAAA
Protective Strip Installation
Sheet 01
Fig. A-UBBAA
Raceway Gap Positions
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Sheet 05
(a) Ribs 27 - Ribs 23
Refer to Fig. A-UBAAA Sheet 01
 , Fig. A-UBBAA Sheet 01
 and Fig. A-UBBAA
Sheet 02
1
 At each raceway gap install one of these items around each of the four looms
1M, 2M, 1S, 2S as follows:
20 Protective Strip ABS5252F01 Item 1
NOTE
: Where harpoon ties are installed near the raceway gaps, the
width of the Protective Strip, Item 1 can be cut to the
dimension to fit between the harpoon ties.
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 23
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 34

@A318/A319/A320/A321
SERVICE BULLETIN
NOTE
: Where the ’S’ routes have had insulators ABS0596 Type S or
Type U installed by SB A320-24-1062 (Mod. No. 22851J0886),
the Protective Strip, Item 1 must be installed over the insulator
and the cable-tie that attaches it.
NOTE
: If the insulator ABS0596 Type S or Type U installed by SB
A320-24-1062:
- extends fully into each raceway channel, it will not be
necessary to install the Protective Strip, Item 1 at that
position
- extends into only one raceway channel or does not extend
into any raceway channel the Protective Strip, Item 1 must
be installed into the channel.
If the loom diameter is too large to allow the Protective Strip,
Item 1 to be installed over the insulator in the raceway
channel:
- the insulator must be removed and cut to a length where it
extends to cover only the gap between the raceways
- the insulator must be re-installed in the gap and the
Protective Strip, Item 1 must then be installed.
a
 Put the Protective Strip, Item 1 into the selected raceway channel and
slide it around the wire loom.
b
 Make sure that the Protective Strip, Item 1 is positioned equally in the
center of the raceway gap.
c
 Put the tail of the Protective Strip, Item 1 through the slot and pull the tail
so that the arrowhead goes through the slot and locks in place.
d
 Cut off the tail of the Protective Strip, Item 1.
2
 If there are insulators ABS0596 Type M installed on the ’S’ routes between the
raceways by Service Bulletin A320-24-1062 (Mod. No. 22851J0886) do this
procedure:
a
 Cut the cable tie that holds the insulator ABS0596 Type M in position on
the two ’S’ routes.
b
 Remove and retain the insulator ABS0596 Type M.
c
 Install the two Protective Strips, Item 1 on the two ’S’ routes.
d
 Install the insulator ABS0596 Type M over the two Protective Strips, Item
1 and hold in place with a new cable tie.
e
 Make sure that the tails of the Protective Strips, Item 1 are in the open
part of the channels of the in sulator ABS0596 Type M.
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 24
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 35

@A318/A319/A320/A321
SERVICE BULLETIN
(b) Ribs 23 - Ribs 16
Refer to Fig. A-UBAAA Sheet 01
 , Fig. A-UBBAA Sheet 01
 and Fig. A-UBBAA
Sheet 03
1
 At each raceway gap (include octant gaps) install one of these items around
each of the four looms 1M, 2M, 1S, 2S as follows:
52 Protective Strip ABS5252F01 Item 1
NOTE
: Where harpoon ties are installed near the raceway gaps, the
width of the Protective Strip, Item 1 can be cut to the
dimension to fit between the harpoon ties.
NOTE
: Where the ’S’ routes have had insulators ABS0596 Type S or
Type U installed by SB A320-24-1062 (Mod. No. 22851J0886),
the Protective Strip, Item 1 must be installed over the insulator
and the cable-tie that attaches it.
NOTE
: If the insulator ABS0596 Type S or Type U installed by SB
A320-24-1062:
- extends fully into each raceway channel, it will not be
necessary to install the Protective Strip, Item 1 at that
position
- extends into only one raceway channel or does not extend
into any raceway channel the Protective Strip, Item 1 must
be installed into the channel.
If the loom diameter is too large to allow the Protective Strip,
Item 1 to be installed over the insulator in the raceway
channel:
- the insulator must be removed and cut to a length where it
extends to cover only the gap between the raceways
- the insulator must be re-installed in the gap and the
Protective Strip, Item 1 must then be installed.
a
 Put the Protective Strip, Item 1 into the selected raceway channel and
slide it around the wire loom.
b
 Make sure that the Protective Strip, Item 1 is positioned equally in the
center of the raceway gap.
c
 Put the tail of the Protective Strip, Item 1 through the slot and pull the tail
so that the arrowhead goes through the slot and locks in place.
d
 Cut off the tail of the Protective Strip, Item 1.
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 25
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 36

@A318/A319/A320/A321
SERVICE BULLETIN
2
 If there are insulators ABS0596 Type M installed on the ’S’ routes between the
raceways by Service Bulletin A320-24-1062 (Mod. No. 22851J0886) do this
procedure:
a
 Cut the cable tie that holds the insulator ABS0596 Type M in position on
the two ’S’ routes.
b
 Remove and retain the insulator ABS0596 Type M.
c
 Install the two Protective Strips, Item 1 on the two ’S’ routes.
d
 Install the insulator ABS0596 Type M over the two Protective Strips, Item
1 and hold in place with a new cable tie.
e
 Make sure that the tails of the Protective Strips, Item 1 are in the open
part of the channels of the in sulator ABS0596 Type M.
(c) Ribs 16 - Ribs 7
Refer to Fig. A-UBAAA Sheet 01
 , Fig. A-UBBAA Sheet 01
 and Fig. A-UBBAA
Sheet 04
1
 At each raceway gap (include octant gaps) install one of these items around
each of the four looms 1M, 2M, 1S, 2S as follows:
104 Protective Strip ABS5252F01 Item 1
NOTE
: Where harpoon ties are installed near the raceway gaps, the
width of the Protective Strip, Item 1 can be cut to the
dimension to fit between the harpoon ties.
NOTE
: Where the ’S’ routes have had insulators ABS0596 Type S or
Type U installed by SB A320-24-1062 (Mod. No. 22851J0886),
the Protective Strip, Item 1 must be installed over the insulator
and the cable-tie that attaches it.
NOTE
: If the insulator ABS0596 Type S or Type U installed by SB
A320-24-1062:
- extends fully into each raceway channel, it will not be
necessary to install the Protective Strip, Item 1 at that
position
- extends into only one raceway channel or does not extend
into any raceway channel the Protective Strip, Item 1 must
be installed into the channel.
If the loom diameter is too large to allow the Protective Strip,
Item 1 to be installed over the insulator in the raceway
channel:
- the insulator must be removed and cut to a length where it
extends to cover only the gap between the raceways
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 26
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 37

@A318/A319/A320/A321
SERVICE BULLETIN
- the insulator must be re-installed in the gap and the
Protective Strip, Item 1 must then be installed.
a
 Put the Protective Strip, Item 1 into the selected raceway channel and
slide it around the wire loom.
b
 Make sure that the Protective Strip, Item 1 is positioned equally in the
center of the raceway gap.
c
 Put the tail of the Protective Strip, Item 1 through the slot and pull the tail
so that the arrowhead goes through the slot and locks in place.
d
 Cut off the tail of the Protective Strip, Item 1.
2
 If there are insulators ABS0596 Type M installed on the ’S’ routes between the
raceways by Service Bulletin A320-24-1062 (Mod. No. 22851J0886) do this
procedure:
a
 Cut the cable tie that holds the insulator ABS0596 Type M in position on
the two ’S’ routes.
b
 Remove and retain the insulator ABS0596 Type M.
c
 Install the two Protective Strips, Item 1 on the two ’S’ routes.
d
 Install the insulator ABS0596 Type M over the two Protective Strips, Item
1 and hold in place with a new cable tie.
e
 Make sure that the tails of the Protective Strips, Item 1 are in the open
part of the channels of the in sulator ABS0596 Type M.
(4) Subtask 921049-831-411-001 - Install Protective Sleeves at the Raceway Exits on
the Trailing Edge
Work Zones and Access Panels
Zone
 Access/Work location
570
670
Manpower Resources
Manhours
 1.50
Minimum number of person
 2
Subtask elapsed time
 0.75
Skills
 ELECTRICAL
Material necessary to do the job
Kit 921049B01R02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
2
 EN6049-006-13-5
 16
 Sleeve
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 27
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 38

@A318/A319/A320/A321
SERVICE BULLETIN
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
3
 NSA935401-05
 32
 Tie
References
Fig. A-UBBAA
Raceway Gap Positions
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Sheet 05
(a) Raceway Exit Rib 27 and Raceway Exit Rib 7
Refer to Fig. A-UBBAA Sheet 01
 , Fig. A-UBBAA Sheet 02
 and Fig. A-UBBAA
Sheet 04
1
 At the raceway exits install one of these items around each of the four looms
1M, 2M, 1S, 2S as follows:
16 Sleeve-Protective EN6049-006-13-5 Item 2
a
 Cut four pieces of protective sleeve to an approximate length of 100.0
mm (4.0 in.) for each raceway exit.
b
 Wind the sleeves, Item 2 tightly around the wire looms with approximately
50.0 mm (2.0 in.) of their length in the raceway channel.
c
 Hold the sleeves tightly in place with:
32 Tie-Cable NSA935401-05 Item 3
one in a position immediately outside of the raceway channel and one
spaced approximately 25.0 mm (1.0 in.) apart, clear of the raceway for
each of the four sleeves at each of the raceway exits.
(5) Subtask 921049-831-414-001 - Install Protective Strips at the Raceway Gaps in
Zone 574/674
Work Zones and Access Panels
Zone
 Access/Work location
574
674
Manpower Resources
Manhours
 1.00
Minimum number of person
 2
Subtask elapsed time
 0.50
Skills
 ELECTRICAL
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 28
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 39

@A318/A319/A320/A321
SERVICE BULLETIN
Material necessary to do the job
Kit 921049B01R02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 ABS5252F01
 4
 Protective Strip
References
Fig. A-UBAAA
Protective Strip Installation
Sheet 01
Fig. A-UBBAA
Raceway Gap Positions
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Sheet 05
(a) Raceway Gaps in Zone 574/674
Refer to Fig. A-UBAAA Sheet 01
 , Fig. A-UBBAA Sheet 01
 and Fig. A-UBBAA
Sheet 05
1
 At each raceway gap install one of these items around each of the four looms
1M, 2M, 1S, 2S as follows:
4 Protective Strip ABS5252F01 Item 1
NOTE
: Where harpoon ties are installed near the raceway gaps, the
width of the Protective Strip, Item 1 can be cut to the
dimension to fit between the harpoon ties.
NOTE
: Where the ’S’ routes have had insulators ABS0596 Type S or
Type U installed by SB A320-24-1062 (Mod. No. 22851J0886),
the Protective Strip, Item 1 must be installed over the insulator
and the cable-tie that attaches it.
NOTE
: If the insulator ABS0596 Type S or Type U installed by SB
A320-24-1062:
- extends fully into each raceway channel, it will not be
necessary to install the Protective Strip, Item 1 at that
position
- extends into only one raceway channel or does not extend
into any raceway channel the Protective Strip, Item 1 must
be installed into the channel.
If the loom diameter is too large to allow the Protective Strip,
Item 1 to be installed over the insulator in the raceway
channel:
- the insulator must be removed and cut to a length where it
extends to cover only the gap between the raceways
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 29
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 40

@A318/A319/A320/A321
SERVICE BULLETIN
- the insulator must be re-installed in the gap and the
Protective Strip, Item 1 must then be installed.
a
 Put the Protective Strip, Item 1 into the selected raceway channel and
slide it around the wire loom.
b
 Make sure that the Protective Strip, Item 1 is positioned equally in the
center of the raceway gap.
c
 Put the tail of the Protective Strip, Item 1 through the slot and pull the tail
so that the arrowhead goes through the slot and locks in place.
d
 Cut off the tail of the Protective Strip, Item 1.
2
 If there are insulators ABS0596 Type M installed on the ’S’ routes between the
raceways by Service Bulletin A320-24-1062 (Mod. No. 22851J0886) do this
procedure:
a
 Cut the cable tie that holds the insulator ABS0596 Type M in position on
the two ’S’ routes.
b
 Remove and retain the insulator ABS0596 Type M.
c
 Install the two Protective Strips, Item 1 on the two ’S’ routes.
d
 Install the insulator ABS0596 Type M over the two Protective Strips, Item
1 and hold in place with a new cable tie.
e
 Make sure that the tails of the Protective Strips, Item 1 are in the open
part of the channels of the in sulator ABS0596 Type M.
(6) Subtask 921049-831-415-001 - Install Protective Sleeves at the Raceway Exits in
Zone 574/674
Work Zones and Access Panels
Zone
 Access/Work location
574
674
Manpower Resources
Manhours
 1.50
Minimum number of person
 2
Subtask elapsed time
 0.75
Skills
 ELECTRICAL
Material necessary to do the job
Kit 921049B01R02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
2
 EN6049-006-13-5
 8
 Sleeve
3
 NSA935401-05
 16
 Tie
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 30
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 41

@A318/A319/A320/A321
SERVICE BULLETIN
References
Fig. A-UBBAA
Raceway Gap Positions
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Sheet 05
(a) Raceway Exits in Zone 574/674
Refer to Fig. A-UBBAA Sheet 01
 and Fig. A-UBBAA Sheet 05
1
 At the raceway exits install one of these items around each of the four looms
1M, 2M, 1S, 2S as follows:
8 Sleeve-Protective EN6049-006-13-5 Item 2
a
 Cut four pieces of protective sleeve to an approximate length of 100.0
mm (4.0 in.) for each raceway exit.
b
 Wind the sleeves, Item 2 tightly around the wire looms with approximately
50.0 mm (2.0 in.) of their length in the raceway channel.
c
 Hold the sleeves tightly in place with:
16 Tie-Cable NSA935401-05 Item 3
one in a position immediately outside of the raceway channel, the other
spaced approximately 25.0 mm (1.0 in.) apart, clear of the raceway for
each of the four sleeves at each of the raceway exits.
**CONF 002
(1) Subtask 921049-831-408-002 - Install Protective Strips at the Raceway Gaps on Rib
27 (Wing Tip)
Work Zones and Access Panels
Zone
 Access/Work location
570
670
Manpower Resources
Manhours
 1.00
Minimum number of person
 2
Subtask elapsed time
 0.50
Skills
 ELECTRICAL
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 31
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 42

@A318/A319/A320/A321
SERVICE BULLETIN
Material necessary to do the job
Kit 921049B02R02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 ABS5252F01
 4
 Protective Strip
References
Fig. A-UBAAB
Protective Strip Installation
Sheet 01
Fig. A-UBBAB
Raceway Gap Positions
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Refer to Fig. A-UBAAB Sheet 01
 and Fig. A-UBBAB Sheet 01
(a) At the raceway gap install one of these items around each of the four looms 1M,
2M, 1S, 2S as follows:
4 Protective Strip ABS5252F01 Item 1
NOTE
: Where harpoon ties are installed near the raceway gaps, the width
of the Protective Strip, Item 1 can be cut to the dimension to fit
between the harpoon ties.
NOTE
: Where the ’S’ routes have had insulators ABS0596 Type S or Type
U installed by SB A320-24-1062 (Mod. No. 22851J0886), the
Protective Strip, Item 1 must be installed over the insulator and the
cable-tie that attaches it.
NOTE
: If the insulator ABS0596 Type S or Type U installed by SB
A320-24-1062:
- extends fully into each raceway channel, it will not be
necessary to install the Protective Strip, Item 1 at that position
- extends into only one raceway channel or does not extend
into any raceway channel the Protective Strip, Item 1 must be
installed into the channel.
If the loom diameter is too large to allow the Protective Strip, Item 1
to be installed over the insulator in the raceway channel:
- the insulator must be removed and cut to a length where it
extends to cover only the gap between the raceways
- the insulator must be re-installed in the gap and the Protective
Strip, Item 1 must then be installed.
1
 Put the Protective Strip, Item 1 into the selected raceway channel and slide it
around the wire loom.
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 32
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 43

@A318/A319/A320/A321
SERVICE BULLETIN
2
 Make sure that the Protective Strip, Item 1 is positioned equally in the center
of the raceway gap.
3
 Put the tail of the Protective Strip, Item 1 through the slot and pull the tail so
that the arrowhead goes through the slot and locks in place.
4
 Cut off the tail of the Protective Strip, Item 1.
5
 If there are insulators ABS0596 Type M installed on the ’S’ routes between the
raceways by Service Bulletin A320-24-1062 (Mod. No. 22851J0886) do this
procedure:
a
 Cut the cable tie that holds the insulator ABS0596 Type M in position on
the two ’S’ routes.
b
 Remove and retain the insulator ABS0596 Type M.
c
 Install the two Protective Strips, Item 1 on the two ’S’ routes.
d
 Install the insulator ABS0596 Type M over the two Protective Strips, Item
1 and hold in place with a new cable tie.
e
 Make sure that the tails of the Protective Strips, Item 1 are in the open
part of the channels of the in sulator ABS0596 Type M.
(2) Subtask 921049-831-409-002 - Install Protective Sleeves at the Raceway Exits on
Rib 27 (Wing Tip)
Work Zones and Access Panels
Zone
 Access/Work location
570
670
Manpower Resources
Manhours
 0.50
Minimum number of person
 2
Subtask elapsed time
 0.25
Skills
 ELECTRICAL
Material necessary to do the job
Kit 921049B02R02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
2
 EN6049-006-13-5
 4
 Sleeve
3
 NSA935401-05
 8
 Tie
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 33
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 44

@A318/A319/A320/A321
SERVICE BULLETIN
References
Fig. A-UBBAB
Raceway Gap Positions
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Refer to Fig. A-UBBAB Sheet 01
(a) At the raceway exit install one of these items around each of the four looms 1M,
2M, 1S, 2S as follows:
4 Sleeve-Protective EN6049-006-13-5 Item 2
1
 Cut four pieces of protective sleeve to an approximate length of 100.0 mm
(4.0 in.).
2
 Wind the sleeves, Item 2 tightly around the wire looms with approximately 50.0
mm (2.0 in.) of their length in the raceway channel.
3
 Hold the sleeves tightly in place with:
8 Tie-Cable NSA935401-05 Item 3
one in a position immediately outside of the raceway channel and one spaced
approximately 25.0 mm (1.0 in.) apart, clear of the raceway for each of the
four sleeves.
(3) Subtask 921049-831-410-002 - Install Protective Strips at the Raceway Gaps on the
Trailing Edge
Work Zones and Access Panels
Zone
 Access/Work location
570
670
Manpower Resources
Manhours
 14.00
Minimum number of person
 2
Subtask elapsed time
 7.00
Skills
 ELECTRICAL
Material necessary to do the job
Kit 921049B02R02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 ABS5252F01
 150
 Protective Strip
References
Fig. A-UBAAB
Protective Strip Installation
Sheet 01
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 34
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 45

@A318/A319/A320/A321
SERVICE BULLETIN
References
Fig. A-UBBAB
Raceway Gap Positions
Sheet 01
Sheet 02
Sheet 03
Sheet 04
(a) Ribs 27 - Ribs 23
Refer to Fig. A-UBAAB Sheet 01
 , Fig. A-UBBAB Sheet 01
 and Fig. A-UBBAB
Sheet 02
1
 At each raceway gap install one of these items around each of the four looms
1M, 2M, 1S, 2S as follows:
20 Protective Strip ABS5252F01 Item 1
NOTE
: Where harpoon ties are installed near the raceway gaps, the
width of the Protective Strip, Item 1 can be cut to the
dimension to fit between the harpoon ties.
NOTE
: Where the ’S’ routes have had insulators ABS0596 Type S or
Type U installed by SB A320-24-1062 (Mod. No. 22851J0886),
the Protective Strip, Item 1 must be installed over the insulator
and the cable-tie that attaches it.
NOTE
: If the insulator ABS0596 Type S or Type U installed by SB
A320-24-1062:
- extends fully into each raceway channel, it will not be
necessary to install the Protective Strip, Item 1 at that
position
- extends into only one raceway channel or does not extend
into any raceway channel the Protective Strip, Item 1 must
be installed into the channel.
If the loom diameter is too large to allow the Protective Strip,
Item 1 to be installed over the insulator in the raceway
channel:
- the insulator must be removed and cut to a length where it
extends to cover only the gap between the raceways
- the insulator must be re-installed in the gap and the
Protective Strip, Item 1 must then be installed.
a
 Put the Protective Strip, Item 1 into the selected raceway channel and
slide it around the wire loom.
b
 Make sure that the Protective Strip, Item 1 is positioned equally in the
center of the raceway gap.
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 35
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 46

@A318/A319/A320/A321
SERVICE BULLETIN
c
 Put the tail of the Protective Strip, Item 1 through the slot and pull the tail
so that the arrowhead goes through the slot and locks in place.
d
 Cut off the tail of the Protective Strip, Item 1.
2
 If there are insulators ABS0596 Type M installed on the ’S’ routes between the
raceways by Service Bulletin A320-24-1062 (Mod. No. 22851J0886) do this
procedure:
a
 Cut the cable tie that holds the insulator ABS0596 Type M in position on
the two ’S’ routes.
b
 Remove and retain the insulator ABS0596 Type M.
c
 Install the two Protective Strips, Item 1 on the two ’S’ routes.
d
 Install the insulator ABS0596 Type M over the two Protective Strips, Item
1 and hold in place with a new cable tie.
e
 Make sure that the tails of the Protective Strips, Item 1 are in the open
part of the channels of the in sulator ABS0596 Type M.
(b) Ribs 23 - Ribs 16
Refer to Fig. A-UBAAB Sheet 01
 , Fig. A-UBBAB Sheet 01
 and Fig. A-UBBAB
Sheet 03
1
 At each raceway gap install one of these items around each of the four looms
1M, 2M, 1S, 2S as follows:
70 Protective Strip ABS5252F01 Item 1
NOTE
: Where harpoon ties are installed near the raceway gaps, the
width of the Protective Strip, Item 1 can be cut to the
dimension to fit between the harpoon ties.
NOTE
: Where the ’S’ routes have had insulators ABS0596 Type S or
Type U installed by SB A320-24-1062 (Mod. No. 22851J0886),
the Protective Strip, Item 1 must be installed over the insulator
and the cable-tie that attaches it.
NOTE
: If the insulator ABS0596 Type S or Type U installed by SB
A320-24-1062:
- extends fully into each raceway channel, it will not be
necessary to install the Protective Strip, Item 1 at that
position
- extends into only one raceway channel or does not extend
into any raceway channel the Protective Strip, Item 1 must
be installed into the channel.
If the loom diameter is too large to allow the Protective Strip,
Item 1 to be installed over the insulator in the raceway
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 36
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 47

@A318/A319/A320/A321
SERVICE BULLETIN
channel:
- the insulator must be removed and cut to a length where it
extends to cover only the gap between the raceways
- the insulator must be re-installed in the gap and the
Protective Strip, Item 1 must then be installed.
a
 Put the Protective Strip, Item 1 into the selected raceway channel and
slide it around the wire loom.
b
 Make sure that the Protective Strip, Item 1 is positioned equally in the
center of the raceway gap.
c
 Put the tail of the Protective Strip, Item 1 through the slot and pull the tail
so that the arrowhead goes through the slot and locks in place.
2
 If there are insulators ABS0596 Type M installed on the ’S’ routes between the
raceways by Service Bulletin A320-24-1062 (Mod. No. 22851J0886) do this
procedure:
a
 Cut the cable tie that holds the insulator ABS0596 Type M in position on
the two ’S’ routes.
b
 Remove and retain the insulator ABS0596 Type M.
c
 Install the two Protective Strips, Item 1 on the two ’S’ routes.
d
 Install the insulator ABS0596 Type M over the two Protective Strips, Item
1 and hold in place with a new cable tie.
e
 Make sure that the tails of the Protective Strips, Item 1 are in the open
part of the channels of the in sulator ABS0596 Type M.
(c) Ribs 16 - Ribs 7
Refer to Fig. A-UBAAB Sheet 01
 , Fig. A-UBBAB Sheet 01
 and Fig. A-UBBAB
Sheet 04
1
 At each raceway gap install one of these items around each of the four looms
1M, 2M, 1S, 2S as follows:
60 Protective Strip ABS5252F01 Item 1
NOTE
: Where harpoon ties are installed near the raceway gaps, the
width of the Protective Strip, Item 1 can be cut to the
dimension to fit between the harpoon ties.
NOTE
: Where the ’S’ routes have had insulators ABS0596 Type S or
Type U installed by SB A320-24-1062 (Mod. No. 22851J0886),
the Protective Strip, Item 1 must be installed over the insulator
and the cable-tie that attaches it.
NOTE
: If the insulator ABS0596 Type S or Type U installed by SB
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 37
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 48

@A318/A319/A320/A321
SERVICE BULLETIN
A320-24-1062:
- extends fully into each raceway channel, it will not be
necessary to install the Protective Strip, Item 1 at that
position
- extends into only one raceway channel or does not extend
into any raceway channel the Protective Strip, Item 1 must
be installed into the channel.
If the loom diameter is too large to allow the Protective Strip,
Item 1 to be installed over the insulator in the raceway
channel:
- the insulator must be removed and cut to a length where it
extends to cover only the gap between the raceways
- the insulator must be re-installed in the gap and the
Protective Strip, Item 1 must then be installed.
a
 Put the Protective Strip, Item 1 into the selected raceway channel and
slide it around the wire loom.
b
 Make sure that the Protective Strip, Item 1 is positioned equally in the
center of the raceway gap.
c
 Put the tail of the Protective Strip, Item 1 through the slot and pull the tail
so that the arrowhead goes through the slot and locks in place.
2
 If there are insulators ABS0596 Type M installed on the ’S’ routes between the
raceways by Service Bulletin A320-24-1062 (Mod. No. 22851J0886) do this
procedure:
a
 Cut the cable tie that holds the insulator ABS0596 Type M in position on
the two ’S’ routes.
b
 Remove and retain the insulator ABS0596 Type M.
c
 Install the two Protective Strips, Item 1 on the two ’S’ routes.
d
 Install the insulator ABS0596 Type M over the two Protective Strips, Item
1 and hold in place with a new cable tie.
e
 Make sure that the tails of the Protective Strips, Item 1 are in the open
part of the channels of the in sulator ABS0596 Type M.
(4) Subtask 921049-831-411-002 - Install Protective Sleeves at the Raceway Exits on
the Trailing Edge
Work Zones and Access Panels
Zone
 Access/Work location
570
670
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 38
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 49

@A318/A319/A320/A321
SERVICE BULLETIN
Manpower Resources
Manhours
 1.50
Minimum number of person
 2
Subtask elapsed time
 0.75
Skills
 ELECTRICAL
Material necessary to do the job
Kit 921049B02R02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
2
 EN6049-006-13-5
 16
 Sleeve
3
 NSA935401-05
 32
 Tie
References
Fig. A-UBBAB
Raceway Gap Positions
Sheet 01
Sheet 02
Sheet 03
Sheet 04
(a) Raceway Exit Rib 27 and Raceway Exit Rib 7
Refer to Fig. A-UBBAB Sheet 01
 ,.Fig. A-UBBAB Sheet 02
 and Fig. A-UBBAB
Sheet 04
1
 At the raceway exits install one of these items around each of the four looms
1M, 2M, 1S, 2S as follows:
16 Sleeve-Protective EN6049-006-13-5 Item 2
a
 Cut four pieces of protective sleeve to an approximate length of 100.0
mm (4.0 in.) for each raceway exit.
b
 Wind the sleeves, Item 2 tightly around the wire looms with approximately
50.0 mm (2.0 in.) of their length in the raceway channel.
c
 Hold the sleeves tightly in place with:
32 Tie-Cable NSA935401-05 Item 3
one in a position immediately outside of the raceway channel and one
spaced approximately 25.0 mm (1.0 in.) apart, clear of the raceway for
each of the four sleeves at each of the raceway exits.
(5) Subtask 921049-831-414-003 - Install Protective Strips at the Raceway Gaps in
Zone 574/674
Work Zones and Access Panels
Zone
 Access/Work location
574
674
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 39
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 50

@A318/A319/A320/A321
SERVICE BULLETIN
Manpower Resources
Manhours
 1.00
Minimum number of person
 2
Subtask elapsed time
 0.50
Skills
 ELECTRICAL
Material necessary to do the job
Kit 921049B02R02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 ABS5252F01
 4
 Protective Strip
References
Fig. A-UBCAA
Raceway Gap Positions Zone 574/674
Sheet 01
Fig. A-UBAAB
Protective Strip Installation
Sheet 01
(a) Raceway Gaps in Zone 574/674
Refer to Fig. A-UBAAB Sheet 01
 and Fig. A-UBCAA Sheet 01
1
 At each raceway gap install one of these items around each of the four looms
1M, 2M, 1S, 2S as follows:
4 Protective Strip ABS5252F01 Item 1
NOTE
: Where harpoon ties are installed near the raceway gaps, the
width of the Protective Strip, Item 1 can be cut to the
dimension to fit between the harpoon ties.
NOTE
: Where the ’S’ routes have had insulators ABS0596 Type S or
Type U installed by SB A320-24-1062 (Mod. No. 22851J0886),
the Protective Strip, Item 1 must be installed over the insulator
and the cable-tie that attaches it.
NOTE
: If the insulator ABS0596 Type S or Type U installed by SB
A320-24-1062:
- extends fully into each raceway channel, it will not be
necessary to install the Protective Strip, Item 1 at that
position
- extends into only one raceway channel or does not extend
into any raceway channel the Protective Strip, Item 1 must
be installed into the channel.
If the loom diameter is too large to allow the Protective Strip,
Item 1 to be installed over the insulator in the raceway
channel:
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 40
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 51

@A318/A319/A320/A321
SERVICE BULLETIN
- the insulator must be removed and cut to a length where it
extends to cover only the gap between the raceways
- the insulator must be re-installed in the gap and the
Protective Strip, Item 1 must then be installed.
a
 Put the Protective Strip, Item 1 into the selected raceway channel and
slide it around the wire loom.
b
 Make sure that the Protective Strip, Item 1 is positioned equally in the
center of the raceway gap.
c
 Put the tail of the Protective Strip, Item 1 through the slot and pull the tail
so that the arrowhead goes through the slot and locks in place.
d
 Cut off the tail of the Protective Strip, Item 1.
2
 If there are insulators ABS0596 Type M installed on the ’S’ routes between the
raceways by Service Bulletin A320-24-1062 (Mod. No. 22851J0886) do this
procedure:
a
 Cut the cable tie that holds the insulator ABS0596 Type M in position on
the two ’S’ routes.
b
 Remove and retain the insulator ABS0596 Type M.
c
 Install the two Protective Strips, Item 1 on the two ’S’ routes.
d
 Install the insulator ABS0596 Type M over the two Protective Strips, Item
1 and hold in place with a new cable tie.
e
 Make sure that the tails of the Protective Strips, Item 1 are in the open
part of the channels of the in sulator ABS0596 Type M.
(6) Subtask 921049-831-415-003 - Install Protective Sleeves at the Raceway Exits in
Zone 574/674
Work Zones and Access Panels
Zone
 Access/Work location
574
674
Manpower Resources
Manhours
 1.50
Minimum number of person
 2
Subtask elapsed time
 0.75
Skills
 ELECTRICAL
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 41
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 52

@A318/A319/A320/A321
SERVICE BULLETIN
Material necessary to do the job
Kit 921049B02R02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
2
 EN6049-006-13-5
 8
 Sleeve
3
 NSA935401-05
 16
 Tie
References
Fig. A-UBCAA
Raceway Gap Positions Zone 574/674
Sheet 01
(a) Raceway Exits in Zone 574/674
Fig. A-UBCAA Sheet 01
1
 At the raceway exits install one of these items around each of the four looms
1M, 2M, 1S, 2S as follows:
8 Sleeve-Protective EN6049-006-13-5 Item 2
a
 Cut four pieces of protective sleeve to an approximate length of 100.0
mm (4.0 in.) for each raceway exit.
b
 Wind the sleeves, Item 2 tightly around the wire looms with approximately
50.0 mm (2.0 in.) of their length in the raceway channel.
c
 Hold the sleeves tightly in place with:
16 Tie-Cable NSA935401-05 Item 3
one in a position immediately outside of the raceway channel, the other
spaced approximately 25.0 mm (1.0 in.) apart, clear of the raceway for
each of the four sleeves at each of the raceway exits.
**CONF 003
(1) Subtask 921049-831-408-002 - Install Protective Strips at the Raceway Gaps on Rib
27 (Wing Tip)
Work Zones and Access Panels
Zone
 Access/Work location
570
670
Manpower Resources
Manhours
 1.00
Minimum number of person
 2
Subtask elapsed time
 0.50
Skills
 ELECTRICAL
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 42
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 53

@A318/A319/A320/A321
SERVICE BULLETIN
Material necessary to do the job
Kit 921049B02R02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 ABS5252F01
 4
 Protective Strip
References
Fig. A-UBAAB
Protective Strip Installation
Sheet 01
Fig. A-UBBAB
Raceway Gap Positions
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Refer to Fig. A-UBAAB Sheet 01
 and Fig. A-UBBAB Sheet 01
(a) At the raceway gap install one of these items around each of the four looms 1M,
2M, 1S, 2S as follows:
4 Protective Strip ABS5252F01 Item 1
NOTE
: Where harpoon ties are installed near the raceway gaps, the width
of the Protective Strip, Item 1 can be cut to the dimension to fit
between the harpoon ties.
NOTE
: Where the ’S’ routes have had insulators ABS0596 Type S or Type
U installed by SB A320-24-1062 (Mod. No. 22851J0886), the
Protective Strip, Item 1 must be installed over the insulator and the
cable-tie that attaches it.
NOTE
: If the insulator ABS0596 Type S or Type U installed by SB
A320-24-1062:
- extends fully into each raceway channel, it will not be
necessary to install the Protective Strip, Item 1 at that position
- extends into only one raceway channel or does not extend
into any raceway channel the Protective Strip, Item 1 must be
installed into the channel.
If the loom diameter is too large to allow the Protective Strip, Item 1
to be installed over the insulator in the raceway channel:
- the insulator must be removed and cut to a length where it
extends to cover only the gap between the raceways
- the insulator must be re-installed in the gap and the Protective
Strip, Item 1 must then be installed.
1
 Put the Protective Strip, Item 1 into the selected raceway channel and slide it
around the wire loom.
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 43
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 54

@A318/A319/A320/A321
SERVICE BULLETIN
2
 Make sure that the Protective Strip, Item 1 is positioned equally in the center
of the raceway gap.
3
 Put the tail of the Protective Strip, Item 1 through the slot and pull the tail so
that the arrowhead goes through the slot and locks in place.
4
 Cut off the tail of the Protective Strip, Item 1.
5
 If there are insulators ABS0596 Type M installed on the ’S’ routes between the
raceways by Service Bulletin A320-24-1062 (Mod. No. 22851J0886) do this
procedure:
a
 Cut the cable tie that holds the insulator ABS0596 Type M in position on
the two ’S’ routes.
b
 Remove and retain the insulator ABS0596 Type M.
c
 Install the two Protective Strips, Item 1 on the two ’S’ routes.
d
 Install the insulator ABS0596 Type M over the two Protective Strips, Item
1 and hold in place with a new cable tie.
e
 Make sure that the tails of the Protective Strips, Item 1 are in the open
part of the channels of the in sulator ABS0596 Type M.
(2) Subtask 921049-831-409-002 - Install Protective Sleeves at the Raceway Exits on
Rib 27 (Wing Tip)
Work Zones and Access Panels
Zone
 Access/Work location
570
670
Manpower Resources
Manhours
 0.50
Minimum number of person
 2
Subtask elapsed time
 0.25
Skills
 ELECTRICAL
Material necessary to do the job
Kit 921049B02R02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
2
 EN6049-006-13-5
 4
 Sleeve
3
 NSA935401-05
 8
 Tie
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 44
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 55

@A318/A319/A320/A321
SERVICE BULLETIN
References
Fig. A-UBBAB
Raceway Gap Positions
Sheet 01
Sheet 02
Sheet 03
Sheet 04
Refer to Fig. A-UBBAB Sheet 01
(a) At the raceway exit install one of these items around each of the four looms 1M,
2M, 1S, 2S as follows:
4 Sleeve-Protective EN6049-006-13-5 Item 2
1
 Cut four pieces of protective sleeve to an approximate length of 100.0 mm
(4.0 in.).
2
 Wind the sleeves, Item 2 tightly around the wire looms with approximately 50.0
mm (2.0 in.) of their length in the raceway channel.
3
 Hold the sleeves tightly in place with:
8 Tie-Cable NSA935401-05 Item 3
one in a position immediately outside of the raceway channel and one spaced
approximately 25.0 mm (1.0 in.) apart, clear of the raceway for each of the
four sleeves.
(3) Subtask 921049-831-410-002 - Install Protective Strips at the Raceway Gaps on the
Trailing Edge
Work Zones and Access Panels
Zone
 Access/Work location
570
670
Manpower Resources
Manhours
 14.00
Minimum number of person
 2
Subtask elapsed time
 7.00
Skills
 ELECTRICAL
Material necessary to do the job
Kit 921049B02R02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
1
 ABS5252F01
 150
 Protective Strip
References
Fig. A-UBAAB
Protective Strip Installation
Sheet 01
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 45
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 56

@A318/A319/A320/A321
SERVICE BULLETIN
References
Fig. A-UBBAB
Raceway Gap Positions
Sheet 01
Sheet 02
Sheet 03
Sheet 04
(a) Ribs 27 - Ribs 23
Refer to Fig. A-UBAAB Sheet 01
 , Fig. A-UBBAB Sheet 01
 and Fig. A-UBBAB
Sheet 02
1
 At each raceway gap install one of these items around each of the four looms
1M, 2M, 1S, 2S as follows:
20 Protective Strip ABS5252F01 Item 1
NOTE
: Where harpoon ties are installed near the raceway gaps, the
width of the Protective Strip, Item 1 can be cut to the
dimension to fit between the harpoon ties.
NOTE
: Where the ’S’ routes have had insulators ABS0596 Type S or
Type U installed by SB A320-24-1062 (Mod. No. 22851J0886),
the Protective Strip, Item 1 must be installed over the insulator
and the cable-tie that attaches it.
NOTE
: If the insulator ABS0596 Type S or Type U installed by SB
A320-24-1062:
- extends fully into each raceway channel, it will not be
necessary to install the Protective Strip, Item 1 at that
position
- extends into only one raceway channel or does not extend
into any raceway channel the Protective Strip, Item 1 must
be installed into the channel.
If the loom diameter is too large to allow the Protective Strip,
Item 1 to be installed over the insulator in the raceway
channel:
- the insulator must be removed and cut to a length where it
extends to cover only the gap between the raceways
- the insulator must be re-installed in the gap and the
Protective Strip, Item 1 must then be installed.
a
 Put the Protective Strip, Item 1 into the selected raceway channel and
slide it around the wire loom.
b
 Make sure that the Protective Strip, Item 1 is positioned equally in the
center of the raceway gap.
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 46
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 57

@A318/A319/A320/A321
SERVICE BULLETIN
c
 Put the tail of the Protective Strip, Item 1 through the slot and pull the tail
so that the arrowhead goes through the slot and locks in place.
d
 Cut off the tail of the Protective Strip, Item 1.
2
 If there are insulators ABS0596 Type M installed on the ’S’ routes between the
raceways by Service Bulletin A320-24-1062 (Mod. No. 22851J0886) do this
procedure:
a
 Cut the cable tie that holds the insulator ABS0596 Type M in position on
the two ’S’ routes.
b
 Remove and retain the insulator ABS0596 Type M.
c
 Install the two Protective Strips, Item 1 on the two ’S’ routes.
d
 Install the insulator ABS0596 Type M over the two Protective Strips, Item
1 and hold in place with a new cable tie.
e
 Make sure that the tails of the Protective Strips, Item 1 are in the open
part of the channels of the in sulator ABS0596 Type M.
(b) Ribs 23 - Ribs 16
Refer to Fig. A-UBAAB Sheet 01
 , Fig. A-UBBAB Sheet 01
 and Fig. A-UBBAB
Sheet 03
1
 At each raceway gap install one of these items around each of the four looms
1M, 2M, 1S, 2S as follows:
70 Protective Strip ABS5252F01 Item 1
NOTE
: Where harpoon ties are installed near the raceway gaps, the
width of the Protective Strip, Item 1 can be cut to the
dimension to fit between the harpoon ties.
NOTE
: Where the ’S’ routes have had insulators ABS0596 Type S or
Type U installed by SB A320-24-1062 (Mod. No. 22851J0886),
the Protective Strip, Item 1 must be installed over the insulator
and the cable-tie that attaches it.
NOTE
: If the insulator ABS0596 Type S or Type U installed by SB
A320-24-1062:
- extends fully into each raceway channel, it will not be
necessary to install the Protective Strip, Item 1 at that
position
- extends into only one raceway channel or does not extend
into any raceway channel the Protective Strip, Item 1 must
be installed into the channel.
If the loom diameter is too large to allow the Protective Strip,
Item 1 to be installed over the insulator in the raceway
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 47
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 58

@A318/A319/A320/A321
SERVICE BULLETIN
channel:
- the insulator must be removed and cut to a length where it
extends to cover only the gap between the raceways
- the insulator must be re-installed in the gap and the
Protective Strip, Item 1 must then be installed.
a
 Put the Protective Strip, Item 1 into the selected raceway channel and
slide it around the wire loom.
b
 Make sure that the Protective Strip, Item 1 is positioned equally in the
center of the raceway gap.
c
 Put the tail of the Protective Strip, Item 1 through the slot and pull the tail
so that the arrowhead goes through the slot and locks in place.
2
 If there are insulators ABS0596 Type M installed on the ’S’ routes between the
raceways by Service Bulletin A320-24-1062 (Mod. No. 22851J0886) do this
procedure:
a
 Cut the cable tie that holds the insulator ABS0596 Type M in position on
the two ’S’ routes.
b
 Remove and retain the insulator ABS0596 Type M.
c
 Install the two Protective Strips, Item 1 on the two ’S’ routes.
d
 Install the insulator ABS0596 Type M over the two Protective Strips, Item
1 and hold in place with a new cable tie.
e
 Make sure that the tails of the Protective Strips, Item 1 are in the open
part of the channels of the in sulator ABS0596 Type M.
(c) Ribs 16 - Ribs 7
Refer to Fig. A-UBAAB Sheet 01
 , Fig. A-UBBAB Sheet 01
 and Fig. A-UBBAB
Sheet 04
1
 At each raceway gap install one of these items around each of the four looms
1M, 2M, 1S, 2S as follows:
60 Protective Strip ABS5252F01 Item 1
NOTE
: Where harpoon ties are installed near the raceway gaps, the
width of the Protective Strip, Item 1 can be cut to the
dimension to fit between the harpoon ties.
NOTE
: Where the ’S’ routes have had insulators ABS0596 Type S or
Type U installed by SB A320-24-1062 (Mod. No. 22851J0886),
the Protective Strip, Item 1 must be installed over the insulator
and the cable-tie that attaches it.
NOTE
: If the insulator ABS0596 Type S or Type U installed by SB
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 48
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 59

@A318/A319/A320/A321
SERVICE BULLETIN
A320-24-1062:
- extends fully into each raceway channel, it will not be
necessary to install the Protective Strip, Item 1 at that
position
- extends into only one raceway channel or does not extend
into any raceway channel the Protective Strip, Item 1 must
be installed into the channel.
If the loom diameter is too large to allow the Protective Strip,
Item 1 to be installed over the insulator in the raceway
channel:
- the insulator must be removed and cut to a length where it
extends to cover only the gap between the raceways
- the insulator must be re-installed in the gap and the
Protective Strip, Item 1 must then be installed.
a
 Put the Protective Strip, Item 1 into the selected raceway channel and
slide it around the wire loom.
b
 Make sure that the Protective Strip, Item 1 is positioned equally in the
center of the raceway gap.
c
 Put the tail of the Protective Strip, Item 1 through the slot and pull the tail
so that the arrowhead goes through the slot and locks in place.
2
 If there are insulators ABS0596 Type M installed on the ’S’ routes between the
raceways by Service Bulletin A320-24-1062 (Mod. No. 22851J0886) do this
procedure:
a
 Cut the cable tie that holds the insulator ABS0596 Type M in position on
the two ’S’ routes.
b
 Remove and retain the insulator ABS0596 Type M.
c
 Install the two Protective Strips, Item 1 on the two ’S’ routes.
d
 Install the insulator ABS0596 Type M over the two Protective Strips, Item
1 and hold in place with a new cable tie.
e
 Make sure that the tails of the Protective Strips, Item 1 are in the open
part of the channels of the in sulator ABS0596 Type M.
(4) Subtask 921049-831-411-002 - Install Protective Sleeves at the Raceway Exits on
the Trailing Edge
Work Zones and Access Panels
Zone
 Access/Work location
570
670
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 49
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

### Page 60

@A318/A319/A320/A321
SERVICE BULLETIN
Manpower Resources
Manhours
 1.50
Minimum number of person
 2
Subtask elapsed time
 0.75
Skills
 ELECTRICAL
Material necessary to do the job
Kit 921049B02R02
ITEM
 NEW PART N˚
 QTY (UM)
 KEYWORD
 SEE
NOTES
2
 EN6049-006-13-5
 16
 Sleeve
3
 NSA935401-05
 32
 Tie
References
Fig. A-UBBAB
Raceway Gap Positions
Sheet 01
Sheet 02
Sheet 03
Sheet 04
(a) Raceway Exit Rib 27 and Raceway Exit Rib 7
Refer to Fig. A-UBBAB Sheet 01
 ,.Fig. A-UBBAB Sheet 02
 and Fig. A-UBBAB
Sheet 04
1
 At the raceway exits install one of these items around each of the four looms
1M, 2M, 1S, 2S as follows:
16 Sleeve-Protective EN6049-006-13-5 Item 2
a
 Cut four pieces of protective sleeve to an approximate length of 100.0
mm (4.0 in.) for each raceway exit.
b
 Wind the sleeves, Item 2 tightly around the wire looms with approximately
50.0 mm (2.0 in.) of their length in the raceway channel.
c
 Hold the sleeves tightly in place with:
32 Tie-Cable NSA935401-05 Item 3
one in a position immediately outside of the raceway channel and one
spaced approximately 25.0 mm (1.0 in.) apart, clear of the raceway for
each of the four sleeves at each of the raceway exits.
**CONF ALL
D. TEST
**CONF 001
None
DATE: Jul 23/07 SERVICE BULLETIN No.: A320-92-1049
REVISION No.: 01 - Nov 28/11 Page: 50
7
Printed in FRANCE © AIRBUS S.A.S. 2007. All rights reserved.

The text continues at https://openairdocs.org/service-documents/airbus/sb-92-1049-01/file/8d6a81a10ef4.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
