# Aircraft Industries Mandatory Bulletin L410UVP

Copy: No revision named ("LET Mandatory Bulletin L410UVP E 144a"), 7 pages: PDF https://openairdocs.org/files/sha256/82/dc/82dc9c1e0e39c4415c8c9452107c6306e4da0826c24907662c80c78b7cee9d27; text https://openairdocs.org/service-documents/aircraft-industries/l410uvp/file/82dc9c1e0e39.md. Rights: © Aircraft Industries. Filed by the FAA in regulations.gov docket FAA-2021-0510, the docket of AD 2021-14-02. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Aircraft Industries](https://openairdocs.org/service-documents/aircraft-industries.md)
- Type: Service bulletin (Mandatory Bulletin)
- Number: L410UVP
- Page: https://openairdocs.org/service-documents/aircraft-industries/l410uvp

## Text (7 pages)

Rights: © Aircraft Industries. Filed by the FAA in regulations.gov docket FAA-2021-0510, the docket of AD 2021-14-02. Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

Q 0501 Př.2/C Aircraft Industries, a.s., 686 04 Kunovice, Czech Republic, phone: +420 572 817 660, fax: +420 572 816 112, e-mail: ots@let.cz 
 
 
MANDATORY BULLETIN 
SB No.: L410UVP-E/144a Revision 1 
An Airworthiness Directive is expected to be issued by the EASA 
Applicability: All nose landing gear legs  P/N 2 143 900 ( or 3 259 900  or 3 259 900 -7) 
if L3 223 016 pin secured by retaining bolt is installed on the L-410 UVP-E, 
L 410 UVP -E-LW, L 410 UVP -E9, L 410 UVP -E20, L 410 UVP -E20 
CARGO models . 
Subject: Nose landing gear inspection and eventually replacement of the L3 223 016 
pin with the new L3 223 316 pin of the lever assembly of the nose landing 
gear steering. Prescription the torque for installation of the retaining bolt. 
Revision 1: Correction of the pin part number. 
Reason: Using of modified pin to prevent falling out from the nose landing gear 
steering. 
Compliance Time: January 31, 2020 
To be carried out by: Approved maintenance organisation or personel. 
Material costs 
to be covered by: Aircraft Industries, a.s., 686 04 Kunovice, Czech Republic. 
Work costs 
to be covered by: Operator. 
Necessary material 
to be delivered by: Aircraft Industries, a.s., 686 04 Kunovice, Czech Republic 
against an order. 
Bulletin becomes effective: On the day of the release. 
Total No. of pages: 6 
Note: Bulletin L410UVP-E/144a Revision 1 supersedes previous bulletin L410UVP-E/144a. 
........................... 
Released: Pavel Jurák 
Head of Airworthiness dept. 
The technical content of this document is approved under the authority of DOA ref. EASA.21J.119. 
Date of release: October 29, 2019

### Page 2

Page: 2  L410UVP-E/144a 
Pages: 6  Revision 1 
1. INSTRUCTIONS FOR PLANNING 
A. CONCERNS 
1. Airplane type 
L-410 
2. Model / Variant / S/N 
See Applicability chapter. 
3. Special qualifications for implementation 
No required 
4. Special new equipment 
Not required. 
B. REASON 
Using of modified pin to prevent falling out from the nose landing gear steering. 
Malfunction of the steering on the nose landing gear was reported by L-410 
operators. Investigation determined that the malfunction was due to loss of the 
vertical pin further to a cracking of the retaining bolt on the nose landing gear 
control. 
This condition, if not detected and corrected, could lead to reduced control of the 
aeroplane by the nose landing gear on the ground i.e. during taxiing, take-off and 
landing phases of the flight. During these phases of the flight is possible direction 
control the aeroplane by rudder on differential braking only. 
 
C. DESCRIPTION 
Visual inspection of the nose landing gear leg steering console assembly. 
Removal of original pin and installation of the new pin if required. 
D. APPROVAL 
This bulletin has been elaborated based on data of design change No. P-410-Z 0207. 
E. MAN-HOURS 
Supposed Man-hours: 1.5 M-hours 
F. MATERIAL - AVAILABILITY 
1. New equipment 
Not required. 
2. Installation parts 
Will be delivered by the airplane manufacturer Aircraft Industries, a.s., 
686 04 Kunovice, Czech Republic against an order.

### Page 3

L410UVP-E/144a  Page: 3 
Revision 1  Pages: 6 
3. Costs 
Material: To be covered by the AI, a.s., 686 04 Kunovice, Czech Republic. 
Work:  To be covered by the operator. 
G. SPECIAL TOOLS 
Not required. 
H. WEIGHT AND BALANCE 
Influence of the replacement on the empty airplane weight and balance is negligible. 
I. USED DOCUMENTATION 
1. Drawings: 
2 143 900  Nose landing gear leg (see Attachment 1 of this bulletin) 
2. Maintenance Manual, Doc. No. Do-L410-1232.2, chap.: 
032.50.00 
J. AMENDED DOCUMENTATION 
AFM not affected. 
MS not affected. 
MM not affected. 
WM not affected. 
2. INSTRUCTION FOR IMPLEMENTATION 
A. VISUAL INSPECTION 
 Visual inspection of the L3 223 016 pin securing. 
 
 
 
 
 
 
 
 
 
 
 
 
Figure 1 - L3 223 016 pin without head secured with a retaining bolt

### Page 4

Page: 4  L410UVP-E/144a 
Pages: 6  Revision 1 
 
 
Figure 2 - L3 245 016 pin without head secured with a dowel pin 
 
Result of the visual inspection: 
If the L3 223 016 pin without head and secured with retaining bolt is installed (refer to 
the Figure 1), perform the L3 223 016 pin replacement according the point 2.B., C. of 
this bulletin. 
If the L3 245 016 pin without head and secured with dowel pin is installed (refer to 
the Figure 2), record the inspection of the nose landing gear into the log book 
according to the point 4.b) of this bulletin. 
B. DISASSEMBLY 
 Remove the grease nipples. 
 Heat the retaining bolt secured with Loctite 270 adhesive on the lever assembly 
see Figure 1 to 250°C with a hot air gun. 
 Unscrew the retaining bolt. 
 Remove the original pin pos. 16. 
C. ASSEMBLY 
 Check the surface of the sliding bushes. 
 Install the new pin pos. 16, put on washer pos. 142 and secure it with lock ring 
pos. 143 according to the Dwg. No. 2 143 900. Use material of point 3.A. of this 
bulletin 
 Degrease the threads of the retaining bolt pos. 106 and pin pos. 16. 
 Apply Loctite 270 on the retaining bolt thread, according to the technical sheet. 
Screw on the retaining bolt to the pin and tighten it, use torque 8 Nm! 
 Install back the grease nipples. 
 Dowel pin

### Page 5

L410UVP-E/144a  Page: 5 
Revision 1  Pages: 6 
D. TESTS 
1. Ground Tests 
 Check of the function of MANUAL nose landing gear steering according to the 
MM, chap. 032.50.00, page 302. 
2. Flight Tests 
Not required. 
E. FINALISATION WORK 
 Grease the new pin with AEROSHELL grease 22 or equivalent after Loctite 270 
hardening. 
 Repair the damaged paint with primer for metal (one layer) and synthetic top coat 
(two layers). 
 
 
 
 
 
 
3. NECESSARY MATERIAL 
A. INSTALLATION PARTS DELIVERED BY THE AIRPLANE MANUFACTURER 
 
 
 
 
 
 
 
 
 
 
 
                                   Figure 3 – Set of the Spare parts 
 
Pos. AI Identifier P/N Name Pcs/Acft 
- 96274150 2143801 Set of the spare parts 1

### Page 6

Page: 6  L410UVP-E/144a 
Pages: 6  Revision 1 
B. MATERIAL SUBJECT TO SPECIAL CONDITIONS DURING TRANSPORT 
To be ensured by the operator 
 
Pos. AI Identifier Name Qty/Acft 
- 82177499 Loctite 270 2 g 
 
4. RECORD IN THE AIRPLANE LOGBOOK 
L410UVP-E/144a Revision 1 Mandatory service bulletin was performed and after visual 
inspection: 
a) L3 223 016 pin secured with retaining bolt was replaced by L3 223 316 pin. 
b) L3 245 016 pin secured with dowel pin remains installed. 
 
Mandatory bulletin was: 
Elaborated: Lukáš Popelka  .......................... 
Checked: Ing. Pavel Ulrich ..........................

### Page 7 (OCR)

33,116,1259129  3 3ž  2 143: 900
68 240  ORMATÍON ONLY
102 53  120,126,133 R
80 149 136 159  OR ZE
.B 2 25
23
112  29,132 0  18  36,116,123, 129
ATTACHMENT 1 OF BULLETIN 144a Revision 1  B-B
35,116,123,129  118,37.117.130 ®  420  28,132  17,116,123,129  156  34,116,123,129

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
