# ATR Service Bulletin ATR42-26-0031

Copy: No revision named ("SBATR42_26_0031_00"), 20 pages: PDF https://openairdocs.org/files/sha256/cd/56/cd5694a86ccbd726f11b41b392fcbc8f5b77437a42de1b9fb6140b0f807b1d3d; text https://openairdocs.org/service-documents/atr/atr42-26-0031/file/cd5694a86ccb.md. Rights: © ATR. Filed by the FAA in regulations.gov docket FAA-2017-1178; AD 2017-26-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [ATR](https://openairdocs.org/service-documents/atr.md)
- Type: Service bulletin (Service Bulletin)
- Number: ATR42-26-0031
- Page: https://openairdocs.org/service-documents/atr/atr42-26-0031

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2017-26-09](https://openairdocs.org/ad/2017-26-09.md), effective Jan 18, 2018: No revision named

## Text (20 pages)

Rights: © ATR. Filed by the FAA in regulations.gov docket FAA-2017-1178; AD 2017-26-09 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

SERVICE BULLETIN ATR42 
 
Original issue - Apr 30/14 Service Bulletin No. ATR42-26-0031 
 
  Page TS-1 of TS-2 
 
TRANSMITTAL SHEET 
Original issue 
This page transmits Original issue of Service Bulletin No. ATR42-26-0031. 
General information concerning this document is available in Service Letter No. ATR42-00-5005. 
TITLE: Fire protection - Inspection of engine fire extinguishing pipes 
 
 
 
 
© ATR. All rights reserved. Confidential and proprietary document. 
 
This document shall not be reproduced or disclosed to a third party  
without the written consent of ATR. This document and its content  
shall not be used for any purpose other than that for which it is supplied. 
 
ATR, its logo, the distinctive ATR aircraft profiles and patented information  
relating to the ATR aircraft are the exclusive property of ATR and are subject  
to copyright. This document and all information contained herein are the sole 
property of ATR. No intellectual property right is granted through, or induced by,  
the delivery of this document or the disclosure of its content.

### Page 2

SERVICE BULLETIN ATR42 
 
Original issue - Apr 30/14 Service Bulletin No. ATR42-26-0031 
 
 Page TS-2 of TS-2 
© ATR. All rights reserved. Confidential and proprietary document. 
 
1 – TABLE OF CONTENTS  
TRANSMITTAL SHEET ...................................................................................Page TS-1 to TS-2 
ACCOMPLISHMENT REPORT ...................................................................... Page AR-1 to AR-3 
PLANNING INFORMATION............................................................................... Page PI-1 to PI-4 
MATERIAL INFORMATION.............................................................................. Page MI-1 to MI-2 
ACCOMPLISHMENT INSTRUCTIONS ............................................................. Page AI-1 to AI-6 
ILLUSTRATIONS................................................................................................ Page IL-1 to IL-3 
 
2 – REVISION SEQUENCES  
 
Issue or Revision Date Additional work 
   
Original issue Apr 30/14 -

### Page 3

SERVICE BULLETIN ATR42 
 
Original issue - Apr 30/14 Service Bulletin No. ATR42-26-0031 
 
  Page AR-1 
© ATR. All rights reserved. Confidential and proprietary document. 
 
ACCOMPLISHMENT REPORT  
SERVICE BULLETIN No. ATR42-26-0031 
Original issue 
Send this report to: 
ATR RETROFIT ENGINEERING 
1 ALLEE PIERRE NADOT 
31712 BLAGNAC CEDEX 
FRANCE 
phone : +33 (0)5 62 21 62 21 
fax : +33 (0)5 62 21 69 41 
e-mail : techdesk@atr.fr 
 
Aircraft identification 
Aircraft MSN (on which this Service Bulletin has been accomplished): 
Aircraft registration number: 
Number of flights: 
Flight hours: 
 
Accomplishment date of this Service Bulletin:

### Page 4

SERVICE BULLETIN ATR42 
 
Original issue - Apr 30/14 Service Bulletin No. ATR42-26-0031 
 
  Page AR-2 
© ATR. All rights reserved. Confidential and proprietary document. 
 
Inspection results 
Tick (3) the appropriate box 
On LH side 
 Yes No 
- Is there damage on engine fire extinguishing pipe?  
 Yes No 
- Is engine fire extinguishing pipe correctly installed (longest part installed 
towards the forward of the aircraft)? 
 
 
 Yes No 
- Is there damage on fastener assembly attaching flap arm and flap hinge  
at rib 4? 
 
 
 Yes No 
- Is there damage on flap arm at rib 4?  
 Yes No 
. If YES, after touch-up, is the remaining thickness within the allowable limit?  
 Yes No 
- Is there damage on flap hinge at rib 4?  
 Yes No 
. If YES, after touch-up, is the remaining thickness within the allowable limit?

### Page 5

SERVICE BULLETIN ATR42 
 
Original issue - Apr 30/14 Service Bulletin No. ATR42-26-0031 
 
  Page AR-3 
© ATR. All rights reserved. Confidential and proprietary document. 
 
On RH side 
 Yes No 
- Is there damage on engine fire extinguishing pipe?  
 Yes No 
- Is engine fire extinguishing pipe correctly installed (longest part installed 
towards the forward of the aircraft)? 
 
 
 Yes No 
- Is there damage on fastener assembly attaching flap arm and flap hinge  
at rib 4? 
 
 
 Yes No 
- Is there damage on flap arm at rib 4?  
 Yes No 
. If YES, after touch-up, is the remaining thickness within the allowable limit?  
 Yes No 
- Is there damage on flap hinge at rib 4?  
 Yes No 
. If YES, after touch-up, is the remaining thickness within the allowable limit?  
 
Maintenance organisation identification 
Maintenance organisation name: 
Name & Signature: 
Date:

### Page 6

SERVICE BULLETIN ATR42 
 
Original issue - Apr 30/14 Service Bulletin No. ATR42-26-0031 
 
 Page PI-1  
© ATR. All rights reserved. Confidential and proprietary document. 
 
COMPLIANCE:  MANDATORY    INSPECTION : 002/2014 
 
TITLE: Fire protection - Inspection of engine fire extinguishing pipes 
1. PLANNING INFORMATION  
A. EFFECTIVITY  
(1) Aircraft models 
ATR42-200 ATR42-300 ATR42-320 ATR42-400 ATR42-500 
NO NO NO NO YES 
 
(2) Aircraft 
MSN Kit(s)  
859, 1001, 1002, 1003, 1004, 1005, 1006, 1007, 
1008, 1009, 1010 None 
For each aircraft MSN, operator should order the mentioned kit(s). 
Other parts or equipment could be required for embodiment of this Service Bulletin. 
Please refer to chapter "MATERIAL INFORMATION" for details. 
(3) Spares 
The following stock items are modifiable (or not) according to the table below. 
None.

### Page 7

SERVICE BULLETIN ATR42 
 
Original issue - Apr 30/14 Service Bulletin No. ATR42-26-0031 
 
 Page PI-2  
© ATR. All rights reserved. Confidential and proprietary document. 
 
B. REASON  
A case of engine fire extinguishing pipe damage has been discovered on an in-service 
aircraft. It was identified that the damage were due to chafing between the engine fire 
extinguishing pipe and a flap bolt when flaps were extended to 30° position. 
The aim of this Service Bulletin is to inspect engine fire extinguishing pipes for possible 
damage and misinstallation and, in case of findings, restore the correct installation. 
COMPLIANCE: Accomplishment of this Service Bulletin is mandatory. 
An Airworthiness Directive will be issued by EASA. 
C. DESCRIPTION  
Accomplishment of this Service Bulletin consists in carrying out the following jobs: 
(1) In zones 295 and 296, inspection of the engine fire extinguishing pipes 
Depending on inspection result, on LH and/or RH side: 
- Correct re-installation of existing extinguishing pipe 
and/or 
- Replacement of extinguishing pipe 
and/or 
- Replacement of fastener assembly on flap arm at rib 4 
and/or 
- Touch-up of flap arm and/or flap hinge. 
D. APPROVAL  
The technical content of this document is approved under the authority of  
DOA No. EASA.21J.044.

### Page 8

SERVICE BULLETIN ATR42 
 
Original issue - Apr 30/14 Service Bulletin No. ATR42-26-0031 
 
 Page PI-3  
© ATR. All rights reserved. Confidential and proprietary document. 
 
E. MANPOWER  
Valid for inspection of extinguishing pipes and flap arm bolts 
 Manhours 
Mechanic  2 
Electrician None 
Total manhours 2 
Elapsed time (hours) 1 
 
NOTE: This Service Bulletin assumes that the aircraft has been placed in the appropriate 
maintenance configuration. The manhours/elapsed time estimates do not include 
preparation for the inspection, non-productive elapsed time or administrative 
functions. 
 
Valid for replacement of extinguishing pipes, flap arm bolts and flap arms and flap hinges 
touch-up 
 Manhours 
Mechanic  16 
Electrician None 
Total manhours 16 
Elapsed time (hours) 8 
 
The above estimates are only provided for general guidance in operator's modification 
planning. 
NOTE: This Service Bulletin assumes that the aircraft has been placed in the appropriate 
maintenance configuration. The manhours/elapsed time estimates do not include 
preparation for the modification, non-productive elapsed time or administrative 
functions. 
F. WEIGHT AND BALANCE  
None.

### Page 9

SERVICE BULLETIN ATR42 
 
Original issue - Apr 30/14 Service Bulletin No. ATR42-26-0031 
 
 Page PI-4  
© ATR. All rights reserved. Confidential and proprietary document. 
 
G. REFERENCES  
The following publications have to be used during accomplishment of this Service Bulletin: 
AMM : 06-41-20 
   
AMM (JIC) : 24-40-00 EAD 10000
26-20-00 FUT 10000
27-50-00 EAR 10000
27-51-00 OPT 10000
53-93-00 RAI 10000
   
NDTM : 51-90-00 
   
SRM : 51-10-10 
51-21-17 
51-21-31 
51-21-58 
51-35-00 
   
H. AFFECTED PUBLICATIONS  
(1) Maintenance documentation 
None. 
(2) Operational documentation 
None.

### Page 10

SERVICE BULLETIN ATR42 
 
Original issue - Apr 30/14 Service Bulletin No. ATR42-26-0031 
 
  Page MI-1 
© ATR. All rights reserved. Confidential and proprietary document. 
 
2. MATERIAL INFORMATION  
A. MATERIAL - COST AND AVAILABILITY  
(1) Material 
Parts cost and availability, or any further commercial information about Service 
Bulletin, may be consulted through ATRactive or operator should contact ATR at the 
following addresses: 
www.atractive.com 
 
ATR CUSTOMER SERVICES 
SPARES SUPPORT 
1 ALLEE PIERRE NADOT 
31712 BLAGNAC CEDEX 
FRANCE 
phone : +33 (0)5 62 21 60 33 
fax : +33 (0)5 62 21 62 80 
e-mail : spares.quotations@atr.fr 
 
Or operator should contact the ATR center it is related to, according to its operational 
area, at the following addresses: 
ATR Americas, Inc. 
4355 NW 36th St. 
Miami Springs, FL 33166 
USA 
phone : +1 (305) 704 9812 
fax : +1 (305) 704 9806 
e-mail : commercialservices@atramericas.com 
 
ATR EASTERN SUPPORT Pte Ltd. 
51 CHANGI BUSINESS PARK CENTRAL 2 
#08-02 THE SIGNATURE 
SINGAPORE 486066 
phone : +65 6542 0122 
fax : +65 6542 1047 
e-mail : commercial.services@atr.com.sg 
 
Operator should place a purchase order specifying parts reference through ATRactive 
or to the ATR center it is related to according to its operational area.

### Page 11

SERVICE BULLETIN ATR42 
 
Original issue - Apr 30/14 Service Bulletin No. ATR42-26-0031 
 
  Page MI-2 
© ATR. All rights reserved. Confidential and proprietary document. 
 
B. LIST OF COMPONENTS  
Item Part Number Qty Description 
    
 Material    
    
3 ABS0114V5D14 2* Screw 
5 ASNA2397-516 2* Washer 
7 MS24665-153 2* Cotter pin 
6 NSA5060-5 2* Nut 
1 S2621004100400 1* LH extinguishing pipe 
2 S2621004100700 1* RH extinguishing pipe 
    
* Quantity depending on inspection result. Maximum quantity is presented. 
C. LIST OF MATERIALS - OPERATOR SUPPLIED  
Item Description Reference SRM 51-35-00 Qty per  aircraft 
    
- Grease 04-004 As required 
- Lubricant 04-012 As required 
- Water repellent 05-027H As required 
- Water repellent 05-027N As required 
4 Sealant 09-019B As required 
  or  
  09-019C  
    
 
NOTE: The above materials can be procured by means of a spares purchase order. 
D. SPECIAL TOOLS  
Accomplishment of this Service Bulletin requires use of the following special tools: 
None.

### Page 12

SERVICE BULLETIN ATR42 
 
Original issue - Apr 30/14 Service Bulletin No. ATR42-26-0031 
 
  Page AI-1 
© ATR. All rights reserved. Confidential and proprietary document. 
 
3. ACCOMPLISHMENT INSTRUCTIONS  
A. GENERAL  
The following instructions assume that work will be accomplished when the aircraft is in 
the appropriate maintenance configuration. 
B. JOB SET-UP  
(1) Set flap at 0° position as per AMM (JIC) 27-50-00 EAR 10000. 
(2) De-energize the aircraft electrical network and connect the aircraft to ground as per 
AMM (JIC) 24-40-00 EAD 10000. 
(3) Install warning notice in cockpit prohibiting operation on flaps. 
(4) Remove the wing to fuselage fairings 295AL and 296AR (Refer to AMM 06-41-20)  
as per AMM (JIC) 53-93-00 RAI 10000. 
C. INSPECTION  
(1) In zones 295 and 296, inspection of the engine fire extinguishing pipes 
As per Figures 1, 2 and 3 
(a) Check there is no damage on the two extinguishing pipes item 1, 
P/N S2621004100400 and item 2, P/N S2621004100700. 
1 If there is no damage, verify the correct installation of the extinguishing pipes 
(longest part towards the forward of the aircraft). 
- If the pipe(s) is(are) correctly installed, perform paragraph 3.F. 
- If the pipe(s) is(are) not correctly installed, remove and re-install the pipe(s) 
correctly as per paragraphs 3.D.(1) for the LH extinguishing pipe and 3.D.(2) 
for the RH extinguishing pipe.

### Page 13

SERVICE BULLETIN ATR42 
 
Original issue - Apr 30/14 Service Bulletin No. ATR42-26-0031 
 
  Page AI-2 
© ATR. All rights reserved. Confidential and proprietary document. 
 
2 If there is damage on LH and/or RH extinguishing pipe(s), remove, discard 
and install new LH and/or RH pipe(s) as per paragraph 3.D.(3), and: 
- As per NDTM 51-90-00, verify there is no damage on the following flap 
fasteners, 
 
. screw  item 3, 
. washer  item 5, 
. nut  item 6, 
. cotter pin  item 7. 
. If there is no damage on above flap fasteners, verify the 
presence of protection on head of screw item 3. If not, protect 
with sealant item 4, Material No. 09-019B or No. 09-019C  
(Refer to SRM 51-35-00). 
 
. If there is damage on above flap fasteners, remove, discard and 
install new fasteners as per paragraph 3.D.(4). 
 
- As per NDTM 51-90-00, verify there is no damage on flap arms item 8 
and/or item 9, and on flap hinges item 10 and/or item 11. 
. If there is at least one of the above parts damaged, on damaged 
parts: 
 
. Perform smooth blend out as per SRM 51-21-58, 
. Measure the remaining thickness, 
. If the remaining thickness is within allowable thickness  
(Refer to SRM 51-10-10), restore protection Alodine + Primer  
on flap arm and Alodine + Primer + Finish paint on flap hinge  
and on the lug of the flap arm (Refer to SRM 51-21-17 for  
Alodine application process and SRM 51-21-31 for paint  
touch-up). 
. If the remaining thickness is not within allowable thickness 
(Refer to SRM 51-10-10), contact ATR to obtain an approved 
solution, at the following address: 
 
ATR TECHDESK 
1 ALLEE PIERRE NADOT 
31712 BLAGNAC CEDEX 
FRANCE 
phone : +33 (0)5 62 21 65 61 
fax : +33 (0)5 62 21 62 32 
e-mail : techdesk@atr.fr

### Page 14

SERVICE BULLETIN ATR42 
 
Original issue - Apr 30/14 Service Bulletin No. ATR42-26-0031 
 
  Page AI-3 
© ATR. All rights reserved. Confidential and proprietary document. 
 
D. MODIFICATION  
(1) Re-installation of the existing LH extinguishing pipe 
As per Figure 1 
(a) Remove the LH extinguishing pipe item 1, P/N S2621004100400 and re-install it 
correctly with the longest part towards the forward of the aircraft. 
(b) Torque pipe ends from 3.03 to 5 daN.m (22.348 to 36.878 lbf.ft). 
(c) Mark the pipe ends and the relative unions with a dash of red paint or permanent 
inks, after having removed the existing marks. 
(2) Re-installation of the existing RH extinguishing pipe 
As per Figure 1 
(a) Remove the RH extinguishing pipe item 2, P/N S2621004100700 and re-install it 
correctly with the longest part towards the forward of the aircraft. 
(b) Torque pipe ends from 3.03 to 5 daN.m (22.348 to 36.878 lbf.ft). 
(c) Mark the pipe ends and the relative unions with a dash of red paint or permanent 
inks, after having removed the existing marks. 
(3) Replacement of LH and/or RH extinguishing pipe(s) 
As per Figure 1 
(a) Remove all the parts listed in the following table. 
REMOVAL     
Item Description Part Number Qty Discarded Qty  Re-used Figure
      
1  LH extinguishing pipe S2621004100400 1 - 1 
and/or      
2 RH extinguishing pipe S2621004100700 1 - 1

### Page 15

SERVICE BULLETIN ATR42 
 
Original issue - Apr 30/14 Service Bulletin No. ATR42-26-0031 
 
  Page AI-4 
© ATR. All rights reserved. Confidential and proprietary document. 
 
(b) Install all the parts listed in the following table. Carefully follow the specific 
instruction(s) detailed after the table. 
    INSTALLATION 
Item Description Part Number Qty New Qty fromRemoval Figure
      
1 LH extinguishing pipe S2621004100400 1 - 1 
and/or      
2 RH extinguishing pipe S2621004100700 1 - 1 
      
 
Specific instruction(s): 
- Before installation, apply lubricant, Material No. 04-012 (Refer to  
SRM 51-35-00) inside the two pipe ends. 
- Install the longest part of the pipe(s) towards the forward of the aircraft. 
- Torque pipe ends from 3.03 to 5 daN.m (22.348 to 36.878 lbf.ft). 
(c) Mark the pipe ends and the relative unions with a dash of red paint or permanent 
inks, after having removed the existing marks. 
(d) On extinguishing pipe(s), application of water repellent. 
WARNING: MAKE SURE THAT VENTILATION IS CORRECT, AVOID DIRECT 
CONTACT WITH THE COMPOUND. 
SMOKING, FIRE, SPARKS OR WELDING IS PROHIBITED 
THROUGHOUT OPERATION. 
THE FIRE RISK INCREASES IF THE EVAPORATION SURFACE 
IS LARGE. WHEN HEATED, THE PRODUCT RELEASES 
INFLAMMABLE FUMES, WHICH MAY FORM AN EXPLOSIVE 
MIXTURE WITH AIR. 
IT IS RECOMMENDED TO WEAR PROTECTIVE GLOVES, 
GLASSES AND A FACE MASK WITH FILTER A. 
FOR HEALTH HARZARD (INHALATION, INGESTION, CONTACT 
WITH SKIN OR EYES) REFER TO THE CORROSION INHIBITING 
COMPOUND MANUFACTURER'S INSTRUCTIONS.

### Page 16

SERVICE BULLETIN ATR42 
 
Original issue - Apr 30/14 Service Bulletin No. ATR42-26-0031 
 
  Page AI-5 
© ATR. All rights reserved. Confidential and proprietary document. 
 
CAUTION: DO NOT SPRAY CORROSION INHIBITING COMPOUND ON 
INSULATION BLANKET AS THIS COULD IMPAIR FLAME 
RESISTANCE. AVOID DIRECT APPLICATION TO CONTROL 
CABLES, PULLEYS, TEFLON BEARINGS AND LUBRICATED 
AREAS. 
1 Apply on pipe(s) the corrosion inhibiting compound, Material No. 05-027H 
(Refer to SRM 51-35-00) with a brush in order to obtain a homogeneous film. 
2 Allow the product to dry for a minimum of 40 minutes. 
3 Allow the solvents to evaporate. 
4 Apply corrosion inhibiting compound, Material No. 05-027N (Refer to 
SRM 51-35-00) with a brush in order to obtain a homogeneous film. 
5 Allow the products to dry for 3 hours. 
6 Allow the solvents to evaporate. 
(4) At rib 4 on flap arm, replacement of flap fasteners 
As per Figure 2 
CAUTION: THE MODIFICATION DESCRIBED BELOW IS PRESENTED FOR ONE 
SIDE. 
(a) Remove all the parts listed in the following table. 
REMOVAL     
Item Description Part Number Qty Discarded Qty  Re-used Figure
      
7 Cotter pin MS24665-153 1 - 2 
6 Nut NSA5060-5 1 - 2 
5 Washer ASNA2397-516 1 - 2 
3 Screw ABS0114V5D14 1 - 2

### Page 17

SERVICE BULLETIN ATR42 
 
Original issue - Apr 30/14 Service Bulletin No. ATR42-26-0031 
 
  Page AI-6 
© ATR. All rights reserved. Confidential and proprietary document. 
 
(b) Install all the parts listed in the following table. Carefully follow the specific 
instruction(s) detailed after the table. 
    INSTALLATION 
Item Description Part Number Qty New Qty fromRemoval Figure
      
3 Screw ABS0114V5D14 1 - 2 
5 Washer ASNA2397-516 1 - 2 
6 Nut NSA5060-5 1 - 2 
7 Cotter pin MS24665-153 1 - 2 
      
 
Specific instruction(s): 
- Before installation, coat the screw item 3 with grease, Material No. 04-004 
(Refer to SRM 51-35-00). 
- Coat the head of screw item 3 with sealant item 4, Material No. 09-019B or 
No. 09-019C (Refer to SRM 51-35-00). 
E. TESTS  
(1) Perform a functional test of engine fire extinguishing system as per 
AMM (JIC) 26-20-00 FUT 10000. 
(2) For aircraft on which the flap fasteners have been replaced (paragraph 3.D.(4)), 
perform an operational test of wing flaps as per AMM (JIC) 27-51-00 OPT 10000. 
F. CLOSE-UP  
(1) Re-install wing to fuselage fairings 295AL and 296AR (Refer to AMM 06-41-20)  
as per AMM (JIC) 53-93-00 RAI 10000. 
(2) Remove the warning notice in cockpit. 
(3) Re-energize the aircraft electrical network and disconnect the aircraft from ground as 
per AMM (JIC) 24-40-00 EAD 10000.

### Page 18

SERVICE BULLETIN ATR42 
 
Original issue - Apr 30/14 Service Bulletin No. ATR42-26-0031 
 
  Page IL-1 
© ATR. All rights reserved. Confidential and proprietary document. 
 
 
 
ILLUSTRATIONS 
In zones 295 and 296, inspection/replacement  
of LH and RH engine fire extinguisher pipes 
Figure 1

### Page 19

SERVICE BULLETIN ATR42 
 
Original issue - Apr 30/14 Service Bulletin No. ATR42-26-0031 
 
  Page IL-2 
© ATR. All rights reserved. Confidential and proprietary document. 
 
 
 
 
 
In zones 541 and 641, LH and RH flap arms at rib 4 
Figure 2

### Page 20

SERVICE BULLETIN ATR42 
 
Original issue - Apr 30/14 Service Bulletin No. ATR42-26-0031 
 
  Page IL-3 
© ATR. All rights reserved. Confidential and proprietary document. 
 
No 
No 
No
No
No
Yes 
Yes 
Yes
Yes 
 
 
 
 
Flow chart 
Figure 3 
Is there damage on
the engine fire 
extinguishing pipe? 
Replace engine fire 
extinguishing pipe with the 
correct installation 
JOB SET-UP 
In zones 295 and 296, inspection of 
engine fire extinguishing pipes 
Inspection of fastener 
assembly attaching flap arm 
and flap hinge at rib 4 
Is the engine fire 
extinguishing pipe 
correctly installed? 
Remove and re-install 
correctly the existing 
extinguishing pipe 
CLOSE-UP 
Is there damage 
on fastener 
assembly?
Replace fastener assembly 
Is there damage 
on flap arm 
and/or flap hinge?
Touch-up flap arm and/or 
flap hinge 
Is remaining 
thickness within 
allowable limit? 
CONTACT 
ATR 
Yes 
TESTS 
1
1 
1

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
