# Aviation Partners Boeing Alert Service Bulletin AP737-57-022

Copy: Revision 2 ("AP737-57-022_Rev02"), 165 pages: PDF https://openairdocs.org/files/sha256/77/ca/77ca46374f67f6b0eb8198747bee3bf6f99fc673ff2fbbfb859996bfa403cd97; text https://openairdocs.org/service-documents/aviation-partners-boeing/ap737-57-022/file/77ca46374f67.md. Rights: © Aviation Partners Boeing. Filed by the FAA in regulations.gov docket FAA-2026-0010, the docket of a proposed AD (Federal Register 2026-00409). Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Aviation Partners Boeing](https://openairdocs.org/service-documents/aviation-partners-boeing.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: AP737-57-022
- Latest revision known: AP737-57-022, Revision 2, dated August 27, 2025 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/aviation-partners-boeing/ap737-57-022

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/aviation-partners-boeing/ap737-57-022/proposed.md).

## Text (165 pages)

Rights: © Aviation Partners Boeing. Filed by the FAA in regulations.gov docket FAA-2026-0010, the docket of a proposed AD (Federal Register 2026-00409). Not covered by OpenAirDocs’ CC0 dedication. Some pages are OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

AVIATION PARTNERS BOEING SERVICE BULLETIN 
555 Andover Park W., Suite 200 
Tukwila, WA 98188 
(206) 830-7699 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page i 
Aviation Partners Boeing Proprietary 
ALERT 
NUMBER: AP737-57-022 Revision Transmittal Sheet 
Original Issue: April 17, 2025  
Revision 2: August 27, 2025  
ATA SYSTEM: 5720  
SUBJECT: WINGS - Outer Wing - Outboard Lower Wing Skin at Stringers S-9 and S-10 – Inspection 
and Repair 
 
This revision includes all pages of the service bulletin. 
COMPLIANCE INFORMATION RELATED TO THIS REVISION 
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive related to this service 
bulletin. The Airworthiness Directive will make the compliance tasks and times given in this service bulletin 
mandatory. 
For airplanes repaired in accordance with the original issue or Revision 1 of this service bulletin, contact Aviation 
Partners Boeing (APB) for determination of any additional required regulatory approvals. 
Inspections performed in accordance with previous revisions of this service bulletin are not required to be 
repeated until the next repeat interval as given in this revision. 
REASON FOR REVISION 
Revision 2 is sent to revise the fastener hardware used in the repair actions found in FIGURE 7 and FIGURE 8 to 
comply with 28-AWL-12 Lightning, Fault Current or Hot Short Protection – Fuel Tank Penetration requirements, 
correct typographical/illustration errors, and add additional clarification for repair actions. 
These sections were changed: 
1.F. Approval 
x Added ‘PSE 57-20-04-1’. 
1.G. Manpower 
x For Table 3 and Table 4, revised manpower estimates for accuracy. 
1.H. Weight and Balance Changes 
x Revised values for ‘Change in Weight’ and ‘Change in Moment’. 
1.J. References 
x For 1.J.3, added Boeing drawing number ‘112A2001, FASTENER INSTL – FRONT SPAR/WING SKIN 
INTERFACE’ to table. 
2.C. Parts Necessary for Each Airplane 
x For 2.C.2, revised fastener hardware part numbers and descriptions to meet requirements per 28-AWL-
12, added alternate hardware options with procurement/usage notes, corrected fastener grip lengths, 
added note for required repair filler thickness, and added additional sealant options. 
3.A. General Information 
x Revised note 13 to specify washers are not allowe d to be used with self-sealing nuts, revised SRM 
references to call out chapter and section, and removed alternate fastener language.

### Page 2

AVIATION PARTNERS BOEING SERVICE BULLETIN 
 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page ii 
Aviation Partners Boeing Proprietary 
3.B. Work Instructions 
x For Table 2 and Table 4, revised ‘Method of Compliance’ for CONDITION 4.3 and CONDITION 8.3 from 
‘FIGURE 5’ to ‘FIGURE 6’. 
x Tables 1–4 and CONDITIONS 2.2.2, 4.2.2, 6.2.2, and 8.2.2 (ACTION 3) were updated to include S-8, 
aligning with inspection instructions in the 1.E Compliance tables. 
FIGURE 7 
x Revised fastener diameter code call outs fo r fastener codes ‘A’ and ‘D’ on Sheet 3 of 11. 
x Corrected fastener grip leng ths for fastener code ‘D’ along S-8L on Sheet 3 of 11. 
x Revised fastener code ‘A’, ‘D’, and ‘E’ call outs fo r field fasteners between S-9L and S-8L for clarity on 
Sheet 3 of 11. 
x Revised sealant call outs on Deta ils E and F to use BMS5-142 and assigned BMS5-95 as an alternate. 
x Added fastener centerlines on Details E and F for reference. 
x Revised language for step numbers on Sheet 6 of 11  stating they are required to complete the actions 
shown in the figure. 
x Revised Step 23 sealant ‘Identification’ from ‘BMS5-45’ to ‘BMS5-142’. 
x Revised note (k) to add statement ‘Filler thickness shall match skin thickness common to stringer 9L’. 
x Revised note (p) to add clarification to oversize fastener hole only if required. 
x Revised note (p) to add an open hole High Freque ncy Eddy Current (HFEC) inspection of all existing 
fastener holes common to the repair after required fastener holes have been oversized. 
x Revised note (v) to add BMS5-45 sealant specificat ion, and change the cap seal procedure reference 
from ’51-20-05’ to ’51-80-01, Figure 1’. 
x Revised note (w) to remove the language requiring a 6:1 ratio for aerosealing of the repair for clarity. 
x Revised note (w) to change sealant call out from ‘BMS5-45’ to ‘BMS5-142’. 
x Revised fastener code table part numbers, descript ions, and hole sizes to meet 28-AWL-12 requirements. 
x Revised note (a) on fastener code table to correct sealant part number from ‘BMS5-95’ to ‘BMS5-45’, 
revised fastener cap seal reference from ‘SRM 51-20-05’ to ‘SRM 51-80-01, Figure 1’. 
x Revised note (c) on fastener code table, installa tion specification from ‘BAC5004-2’ to ‘BAC5047’. 
x Added alternate part numbers, notes (d) and (e) to fastener code table for specific airplane line numbers. 
FIGURE 8 
x Corrected typographical errors for all instances of ‘F igure 7’ and revised to ‘Figure 8’, where applicable. 
x Revised fastener diameter code call outs for fastener codes ‘A’ and ‘D’ on Sheet 3 of 11. 
x Corrected fastener grip leng ths for fastener code ‘D’ along S-8L on Sheet 3 of 11. 
x Revised fastener code ‘A’, ‘D’, and ‘E’ call outs fo r field fasteners between S-9L and S-8L for clarity on 
Sheet 3 of 11. 
x Revised sealant call outs on Deta ils E and F to use BMS5-142 and assigned BMS5-95 as an alternate. 
x Added fastener centerlines on Details E and F for reference. 
x Revised language for step numbers on Sheet 6 of 11  stating they are required to complete the actions 
shown in the figure. 
x Revised Step 23 sealant ‘Identification’ from ‘BMS5-45’ to ‘BMS5-142’. 
x Revised note (a) to state ‘right’ instead of ‘left’. 
x Revised note (k) to add statement ‘Filler thickness shall match skin thickness common to stringer 9L’. 
x Revised note (p) to add clarification to oversize fastener hole only if required.

### Page 3

AVIATION PARTNERS BOEING SERVICE BULLETIN 
 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page iii 
Aviation Partners Boeing Proprietary 
FIGURE 8 (Cont.) 
x Revised note (p) to add an open hole High Freque ncy Eddy Current (HFEC) inspection of all existing 
fastener holes common to the repair after required fastener holes have been oversized. 
x Revised note (v) to add BMS5-45 sealant specificat ion, and change the cap seal procedure reference 
from ’51-20-05’ to ’51-80-01, Figure 1’. 
x Revised note (w) to remove the language requiring a 6:1 ratio for aerosealing of the repair for clarity. 
x Revised note (w) to change sealant call out from ‘BMS5-45’ to ‘BMS5-142’. 
x Revised fastener code table part numbers, descript ions, and hole sizes to meet 28-AWL-12 requirements. 
x Revised note (a) on fastener code table to correct sealant part number from ‘BMS5-95’ to ‘BMS5-45’, 
revised fastener cap seal reference from ‘SRM 51-20-05’ to ‘SRM 51-80-01, Figure 1’. 
x Revised note (c) on fastener code table, installa tion specification from ‘BAC5004-2’ to ‘BAC5047’. 
x Added alternate part numbers, notes (d) and (e) to fastener code table for specific airplane line numbers. 
REVISION HISTORY 
Original Issue: April 17, 2025 
Revision 1: June 13, 2025 
Revision 2: August 27, 2025

### Page 4

AVIATION PARTNERS BOEING SERVICE BULLETIN 
555 Andover Park W., Suite 200 
Tukwila, WA 98188 
(206) 830-7699 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 1 of 162 
Aviation Partners Boeing Proprietary 
ALERT 
NUMBER: AP737-57-022  
Original Issue: April 17, 2025  
Revision 2: August 27, 2025  
ATA SYSTEM: 5720  
SUBJECT: WINGS - Outer Wing - Outboard Lower Wing Skin at Stringers S-9 and S-10 – Inspection 
and Repair 
 
PROPRIETARY NOTICE 
The data contained hereon and herein is proprietary to Aviat ion Partners Boeing. Neither this data nor the data 
contained herein shall be reprod uced, used or disclosed to others without  the written authorization of Aviation 
Partners Boeing. 
 
EXPORT CONTROLLED TECHNOLOGY 
This document contains information about a technology controlled by the Export Administration Regulations (EAR) 
(15 CFR 730-774). It has been classified under Export Control Classification Number (ECCN) 9E991 and may not 
be exported to certain countries without a license. Providing this information to a foreign national – inside or outside 
the United States – can constitute a prohibited export. Each person handling this document has a legal responsibility 
to comply with all applicable EAR requirements and should consult with an Export Control Officer before providing 
it to any foreign national.

### Page 5

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 2 of 162 
Aviation Partners Boeing Proprietary 
APB DOCUMENT FEEDBACK FORM 
To provide feedback on this document to APB for corrections or improvements, please complete the form below 
and email to the attention of APB Product Support Engineering at: 
Email: leng@aviationpartners.com 
Airline Name: ______________________________________________ 
Contact Name: ______________________________________________ 
Phone Number: ______________________________________________ 
Email Address: ______________________________________________ 
Airplane Model-Type: ______________________________________________ 
Document Number: ______________________________________________ 
Document Revision: ______________________________________________ 
Document Title: ______________________________________________ 
Chapter-Section-
Subject: ______________________________________________ 
Page: ______________________________________________ 
Page Date: ______________________________________________ 
Description of Change: 
(Include additional 
sheets as required) 
 
 
 
 
 
 
 
 
 
 
 
 
 
Attachments: ______________________________________________

### Page 6

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 3 of 162 
Aviation Partners Boeing Proprietary 
TABLE OF CONTENTS 
APB DOCUMENT FEEDBACK FORM .................................................................................................................... 2 
SUMMARY  .............................................................................................................................................................. 5 
1. PLANNING INFORMATION ...................................................................................................................... 9 
A. Effectivity.................................................................................................................................................... 9 
1. Airplanes .................................................................................................................................................... 9 
2. Spares Affected ......................................................................................................................................... 9 
B. Concurrent Requirements ........................................................................................................................ 10 
C. Reason ..................................................................................................................................................... 10 
D. Description ............................................................................................................................................... 10 
E. Compliance .............................................................................................................................................. 12 
F. Approval ................................................................................................................................................... 33 
G. Manpower ................................................................................................................................................ 33 
H. Weight and Balance Changes ................................................................................................................. 36 
I. Electrical Load Data ................................................................................................................................. 36 
J. References .............................................................................................................................................. 36 
1. Existing Data: ........................................................................................................................................... 36 
2. Data Supplied with this Service Bulletin: ................................................................................................. 36 
3. Installation Drawings Used in the Preparation of this Service Bulletin: ................................................... 36 
K. Publications Affected ............................................................................................................................... 37 
1. Publications ............................................................................................................................................. 37 
2. Damage Tolerance Based Structural Inspections: .................................................................................. 37 
L. Interchangeability and Intermixability of Parts ......................................................................................... 37 
M. Software Accomplishment Summary ....................................................................................................... 37 
2. MATERIAL INFORMATION ..................................................................................................................... 38 
A. Material – Price and Availability ............................................................................................................... 38 
B. Industry Support Information ................................................................................................................... 38 
C. Parts Necessary for Each Airplane .......................................................................................................... 38 
1. Kits/Parts.................................................................................................................................................. 38 
2. Parts and Materials Supplied by the Operator:........................................................................................ 38 
3. Parts Modified and Re-identified. ............................................................................................................ 40 
4. Parts Removed and Not Replaced .......................................................................................................... 40 
D. Parts Necessary to Change Spares ........................................................................................................ 40 
E. Special Tooling – Price Availability .......................................................................................................... 40 
F. Special Tooling Necessary to do this Service Bulletin ............................................................................ 40 
3. ACCOMPLISHMENT INSTRUCTIONS ................................................................................................... 41 
A. GENERAL INFORMATION ..................................................................................................................... 41 
B. WORK INSTRUCTIONS .......................................................................................................................... 43 
FIGURE 1: LEFT WING – OUTBOARD LOWER WING SKIN AT STRINGERS S-9 AND S-10 - EXTERNAL 
GENERAL VISUAL INSPECTION ..................................................................................................... 64

### Page 7

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 4 of 162 
Aviation Partners Boeing Proprietary 
FIGURE 2: RIGHT WING – OUTBOARD LOWER WING SKIN AT STRINGERS S-9 AND S-10 - EXTERNAL 
GENERAL VISUAL INSPECTION ..................................................................................................... 66 
FIGURE 3: LEFT WING – OUTBOARD LOWER WING SKIN AT STRINGER S-9 – SURFACE HFEC 
INSPECTION ...................................................................................................................................... 68 
FIGURE 4: LEFT WING – OUTBOARD LOWER WING SKIN AT STRINGER S-10 – SURFACE HFEC 
INSPECTION ...................................................................................................................................... 70 
FIGURE 5: RIGHT WING – OUTBOARD LOWER WING SKIN AT STRINGER S-9 – SURFACE HFEC 
INSPECTION ...................................................................................................................................... 72 
FIGURE 6: RIGHT WING – OUTBOARD LOWER WING SKIN AT STRINGER S-10 – SURFACE HFEC 
INSPECTION ...................................................................................................................................... 74 
FIGURE 7: LEFT WING –  OUTBD LWR WING SKIN AT STRINGER S-9 – CRACK REMOVAL AND REPAIR
 ............................................................................................................................................................ 76 
FIGURE 8: RIGHT WING – OUTBD LWR WING SKIN AT STRINGER S-9 – CRACK REMOVAL AND REPAIR
 ............................................................................................................................................................ 87 
FIGURE 9: LEFT WING – OUTBD LWR WING SKIN AT STRINGER S-9 REPAIR – EXTERNAL INSPECTION
 ............................................................................................................................................................ 98 
FIGURE 10: RIGHT WING – OUTBD LWR WING SKIN AT STRINGER S-9 REPAIR – EXTERNAL 
INSPECTION .................................................................................................................................... 102 
FIGURE 11: LEFT WING – OUTBD LWR WING SKIN AT STRINGER S-9 REPAIR – INTERNAL INSPECTION
 .......................................................................................................................................................... 106 
FIGURE 12: RIGHT WING – OUTBD LWR WING SKIN AT STRINGER S-9 REPAIR – INTERNAL 
INSPECTION .................................................................................................................................... 112 
APPENDIX A: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE TABLE 1: INSPECTION OF THE 
OUTBOARD LOWER WING SKIN LEFT WING AT STRINGERS S-9 AND S-10 .......................... 118 
APPENDIX B: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE TABLE 2: INSPECTION OF THE 
OUTBOARD LOWER WING SKIN RIGHT WING AT STRINGERS S-9 AND S-10 ........................ 123 
APPENDIX C: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE TABLE 3: INSPECTION OF THE 
OUTBOARD LOWER WING SKIN LEFT WING AT STRINGERS S-9 AND S-10 .......................... 128 
APPENDIX D: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE TABLE 4: INSPECTION OF THE 
OUTBOARD LOWER WING SKIN RIGHT WING AT STRINGERS S-9 AND S-10 ........................ 133 
APPENDIX E: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE TABLE 5: INSPECTION OF THE 
OUTBOARD LOWER WING SKIN LEFT WING AT STRINGERS S-9 AND S-10 .......................... 138 
APPENDIX F: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE TABLE 6: INSPECTION OF THE 
OUTBOARD LOWER WING SKIN RIGHT WING AT STRINGERS S-9 AND S-10 ........................ 142 
APPENDIX G: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE TABLE 7: INSPECTION OF THE 
OUTBOARD LOWER WING SKIN LEFT WING AT STRINGERS S-9 AND S-10 .......................... 146 
APPENDIX H: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE TABLE 8: INSPECTION OF THE 
OUTBOARD LOWER WING SKIN RIGHT WING AT STRINGERS S-9 AND S-10 ........................ 150 
APPENDIX I: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE TABLE 9: INSPECTION OF THE 
OUTBOARD LOWER WING SKIN LEFT WING AT STRINGERS S-9 AND S-10 .......................... 154 
APPENDIX J: LOGIC DIAGRAM FOR PARAGRAPH 1.E., COMPLIANCE TABLE 10: INSPECTION OF THE 
OUTBOARD LOWER WING SKIN RIGHT WING AT STRINGERS S-9 AND S-10 ........................ 158 
APPENDIX K: PART FITUP FORCES ............................................................................................................... 162

### Page 8

AVIATION PARTNERS BOEING SERVICE BULLETIN 
555 Andover Park W., Suite 200 
Tukwila, WA 98188 
(206) 830-7699 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 5 of 162 
Aviation Partners Boeing Proprietary 
SUMMARY 
ALERT 
NUMBER: AP737-57-022 Summary 
Original Issue: April 17, 2025  
Revision 2: August 27, 2025  
ATA SYSTEM: 5720  
SUBJECT: WINGS - Outer Wing - Outboard Lower Wing Skin at Stringers S-9 and S-10 – Inspection 
and Repair 
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH 
1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT TO THE NEW 
OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER. 
CONCURRENT REQUIREMENTS 
None. 
BACKGROUND 
Accomplishment of this service bulletin will make sure any crack in the outboard lower wing skin, left and right 
wing, common to the two most outboard fasteners at stringers S-9 and S-10, is found and repaired before the 
crack reaches a critical length. If this service bulletin is not done, any crack that is not detected and corrected 
could cause the inability of the Principle Structural Element to sustain limit loads and subsequent loss of structural 
integrity. 
737-800 operators reported crack findings at the identical fastener location on seven airplanes during routine 
maintenance inspections. The cracks were all located in the outboard lower wing skin at the outboard end of 
stringer S-9, common to the most outboard fastener. The cracks were found to extend in the forward and aft 
direction and ranged from 2 inches to 5 inches in length. The reported airplanes had accumulated between 
20,602 to 30,150 flight cycles, and 41,777 to 77,993 flight hours, at the time of finding. Further analysis 
determined that stringer S-10 has an equivalent stress level to stringer S-9 and could also have early cracking. 
This service bulletin gives instructions to do an external surface High Frequency Eddy Current (HFEC) inspection 
of the outboard lower wing skin at the two most outboard fasteners at S-9 and S-10, left and right wing, for any 
crack. A repair is available in this service bulletin for cracks found at the two most outboard fasteners at S-9 if 
they do not exceed specified size limits. 
Boeing Service Related Problem (SRP) 737-NG-SRP-57-0399 is related to this service bulletin. 
Boeing Fleet Team Digest (FTD) 737NG-FTD-57-22002 is related to this service bulletin.

### Page 9

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 6 of 162 
Aviation Partners Boeing Proprietary 
This table is provided to operators for planning purposes only. Refer to the applicable sections for more 
information. 
Planning Data Affected Reference 
Spares Affected No Paragraph 1.A.2., Spares Affected 
AD Related Yes Refer to Service Bulletin AP737-57-022. 
Alternative Method of Compliance (AMOC) Yes Paragraph 1.F Approval 
Weight and Balance Change Yes Paragraph 1.H., Weight and Balance Changes 
Electrical Load Changed No Paragraph 1.I., Electrical Load Data 
Publications Affected No Paragraph 1.K., Publications Affected 
Airplane Flight Operations Affected (Flight 
Crew Operations Manual and/or FAA 
Approved Airplane Flight Manual) 
No Paragraph 1.K., Publications Affected 
Kits/Parts Required No Paragraph 2.C.1., Kits/Parts 
Operator Supplied Parts/Material Yes Paragraph 2.C.2., Parts and Materials Supplied by 
the Operator 
Special Tooling Required No Paragraph 2.F., Special Tooling Necessary to do 
this Service Bulletin 
ACTION 
For Group 1 and Group 2 aircraft: 
Do an external general visual inspection of the outboard lower wing skin at the two most outboard fasteners at S-
9 and S-10, left and right wing, for any repair. 
1. If any repair is found: 
a. Contact Aviation Partners Boeing for alternative inspection(s) and corrective action instruction(s), and 
do the alternative inspection(s) and applicable on-condition corrective action(s) AND 
b. Do an external surface High Frequency Eddy Current (HFEC) inspection of the outboard lower wing 
skin at the two most outboard fasteners at S-9 and S-10, left and right wing, for any crack at the 
unrepaired areas. 
(1) If no crack is found, repeat external surface HFEC inspection of the outboard lower wing skin 
at the two most outboard fasteners at stringers S-9 and S-10, left and right wing, for any crack. 
(2) If any crack is found, contact Aviation Partners Boeing for repair instructions and do the repair 
and repeat the external surface HFEC inspection of the outboard lower wing skin at the two 
most outboard fasteners at stringers S-9 and S-10, left and right wing, for any crack. 
2. If no repair is found, do an external surface HFEC in spection of the outboard lower wing skin at the two 
most outboard fasteners at stringers S-9 and S-10, left and right wing, for any crack. 
a. If no crack is found, repeat external surface HFEC  inspection of the outboard lower wing skin at the 
two most outboard fasteners at stringers S-9 and S-10, left and right wing, for any crack. 
b. If any crack is found at S-9: 
(1) Do the repair available in this service bulletin if  the crack damage can be removed entirely in 
accordance with FIGURE 7 or FIGURE 8 and repeat inspection in accordance with FIGURE 9 
or FIGURE 10, respectively. 
(2) If crack damage cannot be re moved by the standard repair available in this service bulletin, 
contact Aviation Partners Boeing for repair instructions and do the repair and repeat the 
external surface HFEC inspection of the outboard lower wing skin at the two most outboard 
fasteners at stringer S-9, left and right wing, for any crack.

### Page 10

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 7 of 162 
Aviation Partners Boeing Proprietary 
c. If any crack is found at S-10 contact Aviation Partne rs Boeing for repair instructions and do the repair 
and repeat the external surface HFEC inspection of the outboard lower wing skin at the two most 
outboard fasteners at stringer S-10, left and right wing, for any crack. 
For Group 3, Group 4, and Group 5 aircraft: 
Do an external general visual inspection of the outboard lower wing skin at the two most outboard fasteners at S-
9 and S-10, left and right wing, for any repair. 
1. If any repair is found: 
a. Contact Aviation Partners Boeing for alternative inspection(s) and corrective action instruction(s), and 
do the alternative inspection(s) and applicable on-condition corrective action(s) AND 
b. Do an external surface High Frequency Eddy Current (HFEC) inspection of the outboard lower wing 
skin at the two most outboard fasteners at S-9 and S-10, left and right wing, for any crack at the 
unrepaired areas. 
(1) If no crack is found, repeat external surface HFEC inspection of the outboard lower wing skin 
at the two most outboard fasteners at stringers S-9 and S-10, left and right wing, for any crack. 
(2) If any crack is found, contact Aviation Partners Boeing for repair instructions and do the repair 
and repeat the external surface HFEC inspection of the outboard lower wing skin at the two 
most outboard fasteners at stringers S-9 and S-10, left and right wing, for any crack. 
2. If no repair is found, do an external surface HFEC in spection of the outboard lower wing skin at the two 
most outboard fasteners at stringers S-9 and S-10, left and right wing, for any crack. 
a. If no crack is found, repeat external surface HFEC  inspection of the outboard lower wing skin at the 
two most outboard fasteners at stringers S-9 and S-10, left and right wing, for any crack. 
b. If any crack is found, contact Aviation Partners Bo eing for repair instructions and do the repair and 
repeat the external surface HFEC inspection of the outboard lower wing skin at the two most 
outboard fasteners at stringers S-9 and S-10, left and right wing, for any crack. 
EFFECTIVITY 
737-700/-800/-900/-900ER Airplanes provisioned for the installation of Split Scimitar Winglets with Blended 
Winglets or Split Scimitar Winglets installed in accordance with STC ST00830SE 
AND 
737-700/700C/-800/-900/-900ER airplanes provisioned for the installation of Blended Winglets with Blended 
Winglets or wing tips installed in accordance with STC ST00830SE. 
Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplanes. 
COMPLIANCE 
The Federal Aviation Administration (FAA) will possibly release an Airworthines s Directive related to this service 
bulletin. The Airworthiness Directive will make the com pliance tasks and times given in the service bulletin 
mandatory. 
Refer to Paragraph 1.E., Compliance. 
INDUSTRY SUPPORT INFORMATION 
Aviation Partners Boeing warranty remedies are not available for the inspections, configuration changes, and/or 
repair procedures given in this service bulletin. 
MANPOWER 
Refer to Paragraph 1.G., Manpower. 
MATERIAL INFORMATION 
Operator Supplied Parts/Materials. Refer to Paragraph 2.A., Material – Price and Availability.

### Page 11 (OCR)

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022
DO AN EXTERNAL SURFACE HIGH FREQUENCY EDDY
FASTENERBON S-1O FOR ANY CRACK BOARD WING
WSTA  564.5 WSTA  WSTA
432.5
WSTA  591.5
458.5
WSTA
458.5
WSTA
WSTA  432.5
591.5
WSTA
564.5
DO AN EXTERNAL SURFACE HIGH FREQUENCY EDDY
CURRENT (HFEC) INSPECTION OF THE LOWER WING
SKIN COMMON TO THE TWO MOST OUTBOARD
FASTENERS ON S-9 FOR ANY CRACK
Original Issue: Apr 17, 2025  AP737-57-022
Revision 2: Aug 27, 2025  Page 8 of 162
Aviation Partners Boeing Proprietary

### Page 12

AVIATION PARTNERS BOEING SERVICE BULLETIN 
555 Andover Park W., Suite 200 
Tukwila, WA 98188 
(206) 830-7699 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 9 of 162 
Aviation Partners Boeing Proprietary 
ALERT 
NUMBER: AP737-57-022  
Original Issue: April 17, 2025  
Revision 2: August 27, 2025  
ATA SYSTEM: 5720  
SUBJECT: WINGS - Outer Wing - Outboard Lower Wing Skin at Stringers S-9 and S-10 – Inspection 
and Repair 
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN PARAGRAPH 
1.A, EFFECTIVITY. IF AN AIRPLANE HAS BEEN LE ASED OR SOLD, SEND THIS DOCUMENT TO THE NEW 
OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE NEW OWNER. 
1. PLANNING INFORMATION 
A. Effectivity 
1. Airplanes 
This service bulletin is applicable to 737-700/-700C/-800/-900/-900ER airplanes provisioned for Split 
Scimitar Winglets and airplanes provisioned for Blended Winglets modified in accordance with STC 
ST00830SE per the table below. 
GROUP CONFIGURATION DESCRIPTION 
1 - 
737-700/-800 Airplanes, Line Numbers 1-777 provisioned for the 
installation of Split Scimitar Winglets with Blended Winglets or Split 
Scimitar Winglets installed in accordance with STC ST00830SE. 
2 - 
737-700/-800 Airplanes, Line Numbers 778-99999 provisioned for the 
installation of Split Scimitar Winglets with Blended Winglets or Split 
Scimitar Winglets installed in accordance with STC ST00830SE. 
3 - 
737-900/-900ER Airplanes, Line Numbers 778-99999 provisioned for 
the installation of Split Scimitar Winglets with Blended Winglets or 
Split Scimitar Winglets installed in accordance with STC ST00830SE. 
4 - 
737-700 Airplanes with Variable Numbers YG001-YG039, YG061-
YG075 provisioned for the installation of Blended Winglets with 
Blended Winglets or wing tips installed in accordance with STC 
ST00830SE. 
5 - 
737-700/-700C/-800 Airplanes with Variable Numbers YD401-YD403, 
YG040-YG044, YG076-YG103, YG111-YG123, YG701 provisioned 
for the installation of Blended Winglets with Blended Winglets or wing 
tips installed in accordance with STC ST00830SE. 
2. Spares Affected 
None.

### Page 13

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 10 of 162 
Aviation Partners Boeing Proprietary 
B. Concurrent Requirements 
None. 
C. Reason 
Accomplishment of this service bulletin will make sure any crack in the outboard lower wing skin, left and 
right side, common to the two most outboard fastener s at stringers S-9 and S-10, is found and repaired 
before reaching a critical length. If this service bullet in is not done, any crack that is not detected and 
corrected could cause the inability of the Principle Structural Element to sustain limit loads and subsequent 
loss of structural integrity. 
737-800 operators reported crack findings at the ident ical fastener location on seven airplanes during 
routine maintenance inspections. The cracks were all located in the outboard lower wing skin at the 
outboard end of stringer S-9, common to the most out board fastener. The cracks were found to extend in 
the forward and aft direction and ranged from 2 inches  to 5 inches in length. The reported airplanes had 
accumulated between 20,602 to 30,150 flight cycles, and 41,777 to 77,993 flight hours, at the time of finding. 
Further analysis determined that stringer S-10 has an equivalent stress level to stringer S-9, and could also 
have early cracking. 
This service bulletin gives instructions to do an exte rnal surface High Frequency Eddy Current (HFEC) 
inspection of the outboard lower wing skin at the two mo st outboard fasteners at S-9 and S-10, left and 
right wing, for any crack. 
Boeing Service Related Problem (SRP) 737-NG-SRP-57-0399 is related to this service bulletin. 
Boeing Fleet Team Digest (FTD) 737NG-FTD-57-22002 is related to this service bulletin. 
D. Description 
For Group 1 and Group 2 aircraft: 
Do an external general visual inspection of the outboard lower wing skin at the two most outboard 
fasteners at S-9 and S-10, left and right wing, for any repair. 
1. If any repair is found: 
a. Contact Aviation Partners Boeing for alternative inspection(s) and corrective action instruction(s), 
and do the alternative inspection(s) and applicable on-condition corrective action(s) AND 
b. Do an external surface High Frequency Eddy Current  (HFEC) inspection of the outboard lower 
wing skin at the two most outboard fasteners at S-9 and S-10, left and right wing, for any crack at 
the unrepaired areas. 
(1) If no crack is found, repeat external surface HFEC inspection of the outboard lower wing skin 
at the two most outboard fasteners at stringers S-9 and S-10, left and right wing, for any 
crack. 
(2) If any crack is found, contact Aviation Part ners Boeing for repair instructions and do the 
repair and repeat the external surface HFEC inspection of the outboard lower wing skin at the 
two most outboard fasteners at stringers S-9 and S-10, left and right wing, for any crack. 
2. If no repair is found, do an external surface HFEC  inspection of the outboard lower wing skin at the 
two most outboard fasteners at stringers S-9 and S-10, left and right wing, for any crack. 
a. If no crack is found, repeat external surface HFEC inspection of the outboard lower wing skin at 
the two most outboard fasteners at stringers S-9 and S-10, left and right wing, for any crack.

### Page 14

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 11 of 162 
Aviation Partners Boeing Proprietary 
b. If any crack is found at S-9: 
(1) Do the repair available in this service bulletin if the crack damage can be removed entirely in 
accordance with FIGURE 7 or FIGURE 8 and repeat inspection in accordance with FIGURE 
9 or FIGURE 10, respectively. Repeat inspection per FIGURE 11 or FIGURE 12, 
respectively. 
(2) If crack damage cannot be removed by the stan dard repair available in this service bulletin, 
contact Aviation Partners Boeing for repair instructions and do the repair and repeat the 
external surface HFEC inspection of the outboard lower wing skin at the two most outboard 
fasteners at stringer S-9, left and right wing, for any crack. 
c. If any crack is found at S-10 contact Aviation Partners Boeing for repair instructions and do the 
repair and repeat the external surface HFEC inspection of the outboard lower wing skin at the two 
most outboard fasteners at stringer S-10, left and right wing, for any crack. 
For Group 3, Group 4, and Group 5 aircraft: 
Do an external general visual inspection of the outboard lower wing skin at the two most outboard 
fasteners at S-9 and S-10, left and right wing, for any repair. 
1. If any repair is found: 
a. Contact Aviation Partners Boeing for alternative inspection(s) and corrective action instruction(s), 
and do the alternative inspection(s) and applicable on-condition corrective action(s) AND 
b. Do an external surface High Frequency Eddy Current  (HFEC) inspection of the outboard lower 
wing skin at the two most outboard fasteners at S-9 and S-10, left and right wing, for any crack at 
the unrepaired areas. 
(1) If no crack is found, repeat external surface HFEC inspection of the outboard lower wing skin 
at the two most outboard fasteners at stringers S-9 and S-10, left and right wing, for any 
crack. 
(2) If any crack is found, contact Aviation Part ners Boeing for repair instructions and do the 
repair and repeat the external surface HFEC inspection of the outboard lower wing skin at the 
two most outboard fasteners at stringers S-9 and S-10, left and right wing, for any crack. 
2. If no repair is found, do an external surface HFEC  inspection of the outboard lower wing skin at the 
two most outboard fasteners at stringers S-9 and S-10, left and right wing, for any crack. 
a. If no crack is found, repeat external surface HFEC inspection of the outboard lower wing skin at 
the two most outboard fasteners at stringers S-9 and S-10, left and right wing, for any crack. 
b. If any crack is found, contact Aviation Partners Boeing for repair instructions and do the repair 
and repeat the external surface HFEC inspection of the outboard lower wing skin at the two most 
outboard fasteners at stringers S-9 and S-10, left and right wing, for any crack.

### Page 15

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 12 of 162 
Aviation Partners Boeing Proprietary 
The work in this service bulletin is done in the maintenance zone(s) given below. 
Group 1: 
Affected Maintenance Zones 
Model Zone 
737-700, 737-800  532, 632 
Group 2: 
Affected Maintenance Zones 
Model Zone 
737-700, 737-800  532, 632 
Group 3: 
Affected Maintenance Zones 
Model Zone 
737-900, 737-900ER 532, 632 
Group 4: 
Affected Maintenance Zones 
Model Zone 
737-700 532, 632 
Group 5: 
Affected Maintenance Zones 
Model Zone 
737-700, 737-700C, 737-800 532, 632 
E. Compliance 
The Federal Aviation Administration (FAA ) will possibly release an Airworthiness Directive related to this 
service bulletin. The Airworthiness Directive will make the compliance tasks and times given in the service 
bulletin mandatory. 
Accomplish the required action(s), bas ed on the applicable condition(s) in Table 1 through Table 10, as 
applicable, in accordance with Accomplishment Instructions. 
When more than one OPTION is given for a CONDITION , do only one of the OPTION numbers. When 
more than one ACTION is given for a CONDITION or  an OPTION, do all of the ACTION numbers for that 
CONDITION or OPTION.

### Page 16

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 13 of 162 
Aviation Partners Boeing Proprietary 
Group 1: 
Table 1: Inspection of the Outboard Lower Wing Skin Left Wing at Stringers S-9 and S-10 
Condition Action Compliance Time  
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
All Airplanes. Do an external general visual 
inspection of the outboard lower 
wing skin at S-9 and S-10 in the 
area defined by FIGURE 1, left 
wing, for any repair  
Whichever 
occurs first: 
1. Before 
20,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours. 
Within 500 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 1: 
ANY REPAIR 
FOUND. 
CONDITION 1 (ACTION 1): 
Contact Aviation Partners Boeing 
for alternative inspection(s) and 
corrective action instruction(s), and 
do the alternative inspection(s) and 
applicable on-condition corrective 
action(s). 
Whichever 
occurs first: 
1. Before 
20,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
Within 500 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 1 (ACTION 2): 
Do an external surface High 
Frequency Eddy Current (HFEC) 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, left wing, 
for any crack at the unrepaired 
areas. 
Whichever 
occurs first: 
1. Before 
20,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
Within 500 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 1.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, left wing, 
for any crack. (a) 
- 3,000 Flight 
Cycles. 
CONDITION 1.2: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing 
for repair instructions and do the 
repair. 
Before further flight. - 
CONDITION 2: 
NO REPAIR 
FOUND. 
Do an external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, left wing, 
for any crack. 
Whichever 
occurs first: 
1. Before 
20,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
 
Within 500 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
-

### Page 17

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 14 of 162 
Aviation Partners Boeing Proprietary 
Group 1: 
Table 1: Inspection of the Outboard Lower Wing Skin Left Wing at Stringers S-9 and S-10 
Condition Action Compliance 
Time  
(Whichever 
Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 2.1: 
NO CRACK FOUND 
AT S-9. 
Repeat the external surface HFEC inspection of 
the outboard lower wing skin at the two most 
outboard fasteners at S-9, left wing, for any crack. 
- 3,000 Flight 
Cycles. 
CONDITION 2.2: 
ANY CRACK FOUND 
AT S-9. 
Verify if the skin cutout and repair action in 
FIGURE 7 is applicable to the on plane crack 
condition. 
Before further 
flight. 
- 
CONDITION 2.2.1: 
ANY CRACK 
OUTSIDE OF THE 
BOUNDARY OF THE 
SKIN CUTOUT. 
Contact Aviation Partners Boeing for repair 
instructions and do the repair. 
Before further 
flight. 
- 
CONDITION 2.2.2: 
ANY CRACK WITHIN 
THE BOUNDARY OF 
THE SKIN CUTOUT. 
CONDITION 2.2.2 (ACTION 1): Do the crack 
removal and repair. 
Before further 
flight. 
- 
CONDITION 2.2.2 (ACTION 2): Do an external 
surface Low Frequency Eddy Current (LFEC) 
inspection of the outboard lower wing skin under 
the repair doubler and an external surface HFEC 
inspection of the outboard lower wing skin at the 
periphery of the repair doubler. 
Within 3,000 
flight cycles 
after doing the 
crack removal 
and skin repair. 
3,000 Flight 
Cycles. 
CONDITION 2.2.2 (ACTION 3): Do an internal 
surface HFEC inspection of the S-8 and S-9 skin 
flange, internal surface HFEC inspection of the 
visible front spar chord, and Ultrasonic Testing 
(UT) inspection of the hidden front spar chord. 
Within 18,000 
flight cycles 
after doing the 
crack removal 
and skin repair. 
18,000 Flight 
Cycles. 
CONDITION 2.2.2.1: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing for repair 
instructions and do the repair. 
Before further 
flight. 
- 
CONDITION 2.3: 
NO CRACK FOUND 
AT S-10. 
Repeat the external surface HFEC inspection of 
the outboard lower wing skin at the two most 
outboard fasteners at S-10, left wing, for any 
crack. 
- 3,000 Flight 
Cycles. 
CONDITION 2.4: 
ANY CRACK FOUND 
AT S-10. 
Contact Aviation Partners Boeing for repair 
instructions and do the repair. 
Before further 
flight. 
- 
(a) It is not required to do the extern al surface HFEC inspection in areas where a repair covers the affected 
inspection zone if the repair meets the conditions that follow: 
1. The repair is the corrective action to the outboard lower wing skin crack condition identified in Service 
Bulletin AP737-57-022 and installed after the Original Issue date of Service Bulletin AP737-57-022 AND 
2. The installed repair was approved by a FAA DER for the Split Scimitar Winglet provisioned configuration 
via a FAA Form 8110-3.

### Page 18

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 15 of 162 
Aviation Partners Boeing Proprietary 
Group 1: 
Table 2: Inspection of the Outboard Lower Wing Skin Right Wing at Stringers S-9 and S-10 
Condition Action Compliance Time  
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
All Airplanes. Do an external general visual 
inspection of the outboard lower 
wing skin at S-9 and S-10 in the 
area defined by FIGURE 2, right 
wing, for any repair. 
Whichever 
occurs first: 
1. Before 
20,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours. 
Within 500 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 3: 
ANY REPAIR 
FOUND. 
CONDITION 3 (ACTION 1): 
Contact Aviation Partners Boeing 
for alternative inspection(s) and 
corrective action instruction(s), and 
do the alternative inspection(s) and 
applicable on-condition corrective 
action(s). 
Whichever 
occurs first: 
1. Before 
20,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
Within 500 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 3 (ACTION 2): 
Do an external surface High 
Frequency Eddy Current (HFEC) 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, right 
wing, for any crack at the 
unrepaired areas. 
Whichever 
occurs first: 
1. Before 
20,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
Within 500 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 3.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, right 
wing, for any crack. (a) 
- 3,000 Flight 
Cycles. 
CONDITION 3.2: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing 
for repair instructions and do the 
repair. 
Before further flight. - 
CONDITION 4: 
NO REPAIR 
FOUND. 
Do an external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, right 
wing, for any crack. 
Whichever 
occurs first: 
1. Before 
20,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
 
Within 500 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
-

### Page 19

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 16 of 162 
Aviation Partners Boeing Proprietary 
Group 1: 
Table 2: Inspection of the Outboard Lower Wing Skin Right Wing at Stringers S-9 and S-10 
Condition Action Compliance 
Time  
(Whichever 
Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 4.1: 
NO CRACK FOUND 
AT S-9. 
Repeat the external surface HFEC inspection of 
the outboard lower wing skin at the two most 
outboard fasteners at S-9, right wing, for any 
crack. 
- 3,000 Flight 
Cycles. 
CONDITION 4.2: 
ANY CRACK FOUND 
AT S-9. 
Verify if the skin cutout and repair action in 
FIGURE 8 is applicable to the on plane crack 
condition. 
Before further 
flight. 
- 
CONDITION 4.2.1: 
ANY CRACK 
OUTSIDE OF THE 
BOUNDARY OF THE 
SKIN CUTOUT. 
Contact Aviation Partners Boeing for repair 
instructions and do the repair. 
Before further 
flight. 
- 
CONDITION 4.2.2: 
ANY CRACK WITHIN 
THE BOUNDARY OF 
THE SKIN CUTOUT. 
CONDITION 4.2.2 (ACTION 1): Do the crack 
removal and repair. 
Before further 
flight. 
- 
CONDITION 4.2.2 (ACTION 2): Do an external 
surface Low Frequency Eddy Current (LFEC) 
inspection of the outboard lower wing skin under 
the repair doubler and an external surface HFEC 
inspection of the outboard lower wing skin at the 
periphery of the repair doubler. 
Within 3,000 
flight cycles 
after doing the 
crack removal 
and skin repair. 
3,000 Flight 
Cycles. 
CONDITION 4.2.2 (ACTION 3): Do an internal 
surface HFEC inspection of the S-8 and S-9 skin 
flange, internal surface HFEC inspection of the 
visible front spar chord, and Ultrasonic Testing 
(UT) inspection of the hidden front spar chord. 
Within 18,000 
flight cycles 
after doing the 
crack removal 
and skin repair. 
18,000 Flight 
Cycles. 
CONDITION 4.2.2.1: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing for repair 
instructions and do the repair. 
Before further 
flight. 
- 
CONDITION 4.3: 
NO CRACK FOUND 
AT S-10. 
Repeat the external surface HFEC inspection of 
the outboard lower wing skin at the two most 
outboard fasteners at S-10, right wing, for any 
crack. 
- 3,000 Flight 
Cycles. 
CONDITION 4.4: 
ANY CRACK FOUND 
AT S-10. 
Contact Aviation Partners Boeing for repair 
instructions and do the repair. 
Before further 
flight. 
- 
(a) It is not required to do the extern al surface HFEC inspection in areas where a repair covers the affected 
inspection zone if the repair meets the conditions that follow: 
1. The repair is the corrective action to the outboard lower wing skin crack condition identified in Service 
Bulletin AP737-57-022 and installed after the Original Issue date of Service Bulletin AP737-57-022 AND 
2. The installed repair was approved by a FAA DER for the Split Scimitar Winglet provisioned configuration 
via a FAA Form 8110-3.

### Page 20

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 17 of 162 
Aviation Partners Boeing Proprietary 
Group 2: 
Table 3: Inspection of the Outboard Lower Wing Skin Left Wing at Stringers S-9 and S-10 
Condition Action Compliance Time  
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
All Airplanes. Do an external general visual 
inspection of the outboard lower 
wing skin at S-9 and S-10 in the 
area defined by FIGURE 1, left 
wing, for any repair. 
Whichever 
occurs first: 
1. Before 
25,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours. 
Within 3,000 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 5: 
ANY REPAIR 
FOUND. 
CONDITION 5 (ACTION 1): 
Contact Aviation Partners Boeing 
for alternative inspection(s) and 
corrective action instruction(s), and 
do the alternative inspection(s) and 
applicable on-condition corrective 
action(s). 
Whichever 
occurs first: 
1. Before 
25,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
Within 3,000 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 5 (ACTION 2): 
Do an external surface High 
Frequency Eddy Current (HFEC) 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, left wing, 
for any crack at the unrepaired 
areas. 
Whichever 
occurs first: 
1. Before 
25,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
Within 3,000 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 5.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, left wing, 
for any crack. (a) 
- 3,000 Flight 
Cycles. 
CONDITION 5.2: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing 
for repair instructions and do the 
repair. 
Before further flight. - 
CONDITION 6: 
NO REPAIR 
FOUND. 
Do an external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, left wing, 
for any crack. 
Whichever 
occurs first: 
1. Before 
25,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
 
Within 3,000 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
-

### Page 21

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 18 of 162 
Aviation Partners Boeing Proprietary 
Group 2: 
Table 3: Inspection of the Outboard Lower Wing Skin Left Wing at Stringers S-9 and S-10 
Condition Action Compliance 
Time  
(Whichever 
Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 6.1: 
NO CRACK FOUND 
AT S-9. 
Repeat the external surface HFEC inspection of 
the outboard lower wing skin at the two most 
outboard fasteners at S-9, left wing, for any crack. 
- 3,000 Flight 
Cycles. 
CONDITION 6.2: 
ANY CRACK FOUND 
AT S-9. 
Verify if the skin cutout and repair action in 
FIGURE 7 is applicable to the on plane crack 
condition. 
Before further 
flight. 
- 
CONDITION 6.2.1: 
ANY CRACK 
OUTSIDE OF THE 
BOUNDARY OF THE 
SKIN CUTOUT. 
Contact Aviation Partners Boeing for repair 
instructions and do the repair. 
Before further 
flight. 
- 
CONDITION 6.2.2: 
ANY CRACK WITHIN 
THE BOUNDARY OF 
THE SKIN CUTOUT. 
CONDITION 6.2.2 (ACTION 1): Do the crack 
removal and repair. 
Before further 
flight. 
- 
CONDITION 6.2.2 (ACTION 2): Do an external 
surface Low Frequency Eddy Current (LFEC) 
inspection of the outboard lower wing skin under 
the repair doubler and an external surface HFEC 
inspection of the outboard lower wing skin at the 
periphery of the repair doubler. 
Within 3,000 
flight cycles 
after doing the 
crack removal 
and skin repair. 
3,000 Flight 
Cycles. 
CONDITION 6.2.2 (ACTION 3): Do an internal 
surface HFEC inspection of the S-8 and S-9 skin 
flange, internal surface HFEC inspection of the 
visible front spar chord, and Ultrasonic Testing 
(UT) inspection of the hidden front spar chord. 
Within 18,000 
flight cycles 
after doing the 
crack removal 
and skin repair. 
18,000 Flight 
Cycles. 
CONDITION 6.2.2.1: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing for repair 
instructions and do the repair. 
Before further 
flight. 
- 
CONDITION 6.3: 
NO CRACK FOUND 
AT S-10. 
Repeat the external surface HFEC inspection of 
the outboard lower wing skin at the two most 
outboard fasteners at S-10, left wing, for any 
crack. 
- 3,000 Flight 
Cycles. 
CONDITION 6.4: 
ANY CRACK FOUND 
AT S-10. 
Contact Aviation Partners Boeing for repair 
instructions and do the repair. 
Before further 
flight. 
- 
(a) It is not required to do the extern al surface HFEC inspection in areas where a repair covers the affected 
inspection zone if the repair meets the conditions that follow: 
1. The repair is the corrective action to the outboard lower wing skin crack condition identified in Service 
Bulletin AP737-57-022 and installed after the Original Issue date of Service Bulletin AP737-57-022 AND 
2. The installed repair was approved by a FAA DER for the Split Scimitar Winglet provisioned configuration 
via a FAA Form 8110-3.

### Page 22

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 19 of 162 
Aviation Partners Boeing Proprietary 
Group 2: 
Table 4: Inspection of the Outboard Lower Wing Skin Right Wing at Stringers S-9 and S-10 
Condition Action Compliance Time  
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
All Airplanes. Do an external general visual 
inspection of the outboard lower 
wing skin at S-9 and S-10 in the 
area defined by FIGURE 2, right 
wing, for any repair. 
Whichever 
occurs first: 
1. Before 
25,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours. 
Within 3,000 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 7: 
ANY REPAIR 
FOUND. 
CONDITION 7 (ACTION 1): 
Contact Aviation Partners Boeing 
for alternative inspection(s) and 
corrective action instruction(s), and 
do the alternative inspection(s) and 
applicable on-condition corrective 
action(s). 
Whichever 
occurs first: 
1. Before 
25,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
Within 3,000 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 7 (ACTION 2): 
Do an external surface High 
Frequency Eddy Current (HFEC) 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, right 
wing, for any crack at the 
unrepaired areas. 
Whichever 
occurs first: 
1. Before 
25,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
Within 3,000 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 7.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, right 
wing, for any crack. (a) 
- 3,000 Flight 
Cycles. 
CONDITION 7.2: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing 
for repair instructions and do the 
repair. 
Before further flight. - 
CONDITION 8: 
NO REPAIR 
FOUND. 
Do an external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, right 
wing, for any crack. 
Whichever 
occurs first: 
1. Before 
25,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
 
Within 3,000 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
-

### Page 23

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 20 of 162 
Aviation Partners Boeing Proprietary 
Group 2: 
Table 4: Inspection of the Outboard Lower Wing Skin Right Wing at Stringers S-9 and S-10 
Condition Action Compliance 
Time  
(Whichever 
Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 8.1: 
NO CRACK FOUND 
AT S-9. 
Repeat the external surface HFEC inspection of 
the outboard lower wing skin at the two most 
outboard fasteners at S-9, right wing, for any 
crack. 
- 3,000 Flight 
Cycles. 
CONDITION 8.2: 
ANY CRACK FOUND 
AT S-9. 
Verify if the skin cutout and repair action in 
FIGURE 8 is applicable to the on plane crack 
condition. 
Before further 
flight. 
- 
CONDITION 8.2.1: 
ANY CRACK 
OUTSIDE OF THE 
BOUNDARY OF THE 
SKIN CUTOUT. 
Contact Aviation Partners Boeing for repair 
instructions and do the repair. 
Before further 
flight. 
- 
CONDITION 8.2.2: 
ANY CRACK WITHIN 
THE BOUNDARY OF 
THE SKIN CUTOUT. 
CONDITION 8.2.2 (ACTION 1): Do the crack 
removal and repair. 
Before further 
flight. 
- 
CONDITION 8.2.2 (ACTION 2): Do an external 
surface Low Frequency Eddy Current (LFEC) 
inspection of the outboard lower wing skin under 
the repair doubler and an external surface HFEC 
inspection of the outboard lower wing skin at the 
periphery of the repair doubler. 
Within 3,000 
flight cycles 
after doing the 
crack removal 
and skin repair. 
3,000 Flight 
Cycles. 
CONDITION 8.2.2 (ACTION 3): Do an internal 
surface HFEC inspection of the S-8 and S-9 skin 
flange, internal surface HFEC inspection of the 
visible front spar chord, and Ultrasonic Testing 
(UT) inspection of the hidden front spar chord. 
Within 18,000 
flight cycles 
after doing the 
crack removal 
and skin repair. 
18,000 Flight 
Cycles. 
CONDITION 8.2.2.1: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing for repair 
instructions and do the repair. 
Before further 
flight. 
- 
CONDITION 8.3: 
NO CRACK FOUND 
AT S-10. 
Repeat the external surface HFEC inspection of 
the outboard lower wing skin at the two most 
outboard fasteners at S-10, right wing, for any 
crack. 
- 3,000 Flight 
Cycles. 
CONDITION 8.4: 
ANY CRACK FOUND 
AT S-10. 
Contact Aviation Partners Boeing for repair 
instructions and do the repair. 
Before further 
flight. 
- 
(a) It is not required to do the extern al surface HFEC inspection in areas where a repair covers the affected 
inspection zone if the repair meets the conditions that follow: 
1. The repair is the corrective action to the outboard lower wing skin crack condition identified in Service 
Bulletin AP737-57-022 and installed after the Original Issue date of Service Bulletin AP737-57-022 AND 
2. The installed repair was approved by a FAA DER for the Split Scimitar Winglet provisioned configuration 
via a FAA Form 8110-3.

### Page 24

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 21 of 162 
Aviation Partners Boeing Proprietary 
Group 3: 
Table 5: Inspection of the Outboard Lower Wing Skin Left Wing at Stringers S-9 and S-10 
Condition Action Compliance Time  
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
All Airplanes. Do an external general visual 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, left 
wing, for any repair. 
Whichever 
occurs first: 
1. Before 
25,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours. 
Within 3,000 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 9: 
ANY REPAIR 
FOUND. 
CONDITION 9 (ACTION 1): 
Contact Aviation Partners Boeing 
for alternative inspection(s) and 
corrective action instruction(s), and 
do the alternative inspection(s) and 
applicable on-condition corrective 
action(s). 
Whichever 
occurs first: 
1. Before 
25,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
Within 3,000 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 9 (ACTION 2): 
Do an external surface High 
Frequency Eddy Current (HFEC) 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, left 
wing, for any crack at the 
unrepaired areas. 
Whichever 
occurs first: 
1. Before 
25,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
Within 3,000 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 9.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, left 
wing, for any crack. (a) 
- 3,000 Flight 
Cycles. 
CONDITION 9.2: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing 
for repair instructions and do the 
repair. 
Before further flight. - 
CONDITION 10: 
NO REPAIR 
FOUND. 
Do an external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, left 
wing, for any crack. 
Whichever 
occurs first: 
1. Before 
25,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
 
Within 3,000 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
-

### Page 25

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 22 of 162 
Aviation Partners Boeing Proprietary 
Group 3: 
Table 5: Inspection of the Outboard Lower Wing Skin Left Wing at Stringers S-9 and S-10 
Condition Action Compliance Time  
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 10.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, left 
wing, for any crack. 
- 3,000 Flight 
Cycles. 
CONDITION 10.2: 
ANY CRACK 
FOUND. 
CONDITION 10.2 (ACTION 1): 
Contact Aviation Partners Boeing 
for repair instructions and do the 
repair. 
Before further flight. - 
CONDITION 10.2 (ACTION 2): 
Repeat the external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, left 
wing, for any crack. (a) 
- 3,000 Flight 
Cycles. 
(a) It is not required to do the extern al surface HFEC inspection in areas where a repair covers the affected 
inspection zone if the repair meets the conditions that follow: 
1. The repair is the corrective action to the outboard lower wing skin crack condition identified in Service 
Bulletin AP737-57-022 and installed after the Original Issue date of Service Bulletin AP737-57-022 AND 
2. The installed repair was approved by a FAA DER for the Split Scimitar Winglet provisioned configuration 
via a FAA Form 8110-3.

### Page 26

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 23 of 162 
Aviation Partners Boeing Proprietary 
Group 3: 
Table 6: Inspection of the Outboard Lower Wing Skin Right Wing at Stringers S-9 and S-10 
Condition Action Compliance Time  
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
All Airplanes. Do an external general visual 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, right 
wing, for any repair. 
Whichever 
occurs first: 
1. Before 
25,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours. 
Within 3,000 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 11: 
ANY REPAIR 
FOUND. 
CONDITION 11 (ACTION 1): 
Contact Aviation Partners Boeing 
for alternative inspection(s) and 
corrective action instruction(s), and 
do the alternative inspection(s) and 
applicable on-condition corrective 
action(s). 
Whichever 
occurs first: 
1. Before 
25,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
Within 3,000 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 11 (ACTION 2): 
Do an external surface High 
Frequency Eddy Current (HFEC) 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, right 
wing, for any crack at the 
unrepaired areas. 
Whichever 
occurs first: 
1. Before 
25,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
Within 3,000 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 11.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, right 
wing, for any crack. (a) 
- 3,000 Flight 
Cycles. 
CONDITION 11.2: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing 
for repair instructions and do the 
repair. 
Before further flight. - 
CONDITION 12: 
NO REPAIR 
FOUND. 
Do an external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, right 
wing, for any crack. 
Whichever 
occurs first: 
1. Before 
25,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
 
Within 3,000 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
-

### Page 27

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 24 of 162 
Aviation Partners Boeing Proprietary 
Group 3: 
Table 6: Inspection of the Outboard Lower Wing Skin Right Wing at Stringers S-9 and S-10 
Condition Action Compliance Time  
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 12.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, right 
wing, for any crack. 
- 3,000 Flight 
Cycles. 
CONDITION 12.2: 
ANY CRACK 
FOUND. 
CONDITION 12.2 (ACTION 1): 
Contact Aviation Partners Boeing 
for repair instructions and do the 
repair. 
Before further flight. - 
CONDITION 12.2 (ACTION 2): 
Repeat the external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, right 
wing, for any crack. (a) 
- 3,000 Flight 
Cycles. 
(a) It is not required to do the extern al surface HFEC inspection in areas where a repair covers the affected 
inspection zone if the repair meets the conditions that follow: 
1. The repair is the corrective action to the outboard lower wing skin crack condition identified in Service 
Bulletin AP737-57-022 and installed after the Original Issue date of Service Bulletin AP737-57-022 AND 
2. The installed repair was approved by a FAA DER for the Split Scimitar Winglet provisioned configuration 
via a FAA Form 8110-3.

### Page 28

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 25 of 162 
Aviation Partners Boeing Proprietary 
Group 4: 
Table 7: Inspection of the Outboard Lower Wing Skin Left Wing at Stringers S-9 and S-10 
Condition Action Compliance Time  
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
All Airplanes. Do an external general visual 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, left 
wing, for any repair. 
Whichever 
occurs first: 
1. Before 
20,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours. 
Within 500 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 13: 
ANY REPAIR 
FOUND. 
CONDITION 13 (ACTION 1): 
Contact Aviation Partners Boeing 
for alternative inspection(s) and 
corrective action instruction(s), and 
do the alternative inspection(s) and 
applicable on-condition corrective 
action(s). 
Whichever 
occurs first: 
1. Before 
20,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
Within 500 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 13 (ACTION 2): 
Do an external surface High 
Frequency Eddy Current (HFEC) 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, left 
wing, for any crack at the 
unrepaired areas. 
Whichever 
occurs first: 
1. Before 
20,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
Within 500 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 13.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, left 
wing, for any crack. (a) 
- 3,000 Flight 
Cycles. 
CONDITION 13.2: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing 
for repair instructions and do the 
repair. 
Before further flight. - 
CONDITION 14: 
NO REPAIR 
FOUND. 
Do an external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, left 
wing, for any crack. 
Whichever 
occurs first: 
1. Before 
20,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
 
Within 500 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
-

### Page 29

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 26 of 162 
Aviation Partners Boeing Proprietary 
Group 4: 
Table 7: Inspection of the Outboard Lower Wing Skin Left Wing at Stringers S-9 and S-10 
Condition Action Compliance Time  
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 14.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, left 
wing, for any crack. 
- 3,000 Flight 
Cycles. 
CONDITION 14.2: 
ANY CRACK 
FOUND. 
CONDITION 14.2 (ACTION 1): 
Contact Aviation Partners Boeing 
for repair instructions and do the 
repair. 
Before further flight. - 
CONDITION 14.2 (ACTION 2): 
Repeat the external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, left 
wing, for any crack. (a) 
- 3,000 Flight 
Cycles. 
(a) It is not required to do the exte rnal surface HFEC inspection in areas where a repair covers the affected 
inspection zone if the repair meets the conditions that follow: 
1. The repair is the corrective action to the outboard lower wing skin crack condition identified in Service 
Bulletin AP737-57-022 and installed after the Original Issue date of Service Bulletin AP737-57-022 AND 
2. The installed repair was approved by a FA A DER for the Blended Winglet provisioned configuration via a 
FAA Form 8110-3.

### Page 30

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 27 of 162 
Aviation Partners Boeing Proprietary 
Group 4: 
Table 8: Inspection of the Outboard Lower Wing Skin Right Wing at Stringers S-9 and S-10 
Condition Action Compliance Time  
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
All Airplanes. Do an external general visual 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, right 
wing, for any repair. 
Whichever 
occurs first: 
1. Before 
20,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours. 
Within 500 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 15: 
ANY REPAIR 
FOUND. 
CONDITION 15 (ACTION 1): 
Contact Aviation Partners Boeing 
for alternative inspection(s) and 
corrective action instruction(s), and 
do the alternative inspection(s) and 
applicable on-condition corrective 
action(s). 
Whichever 
occurs first: 
1. Before 
20,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
Within 500 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 15 (ACTION 2): 
Do an external surface High 
Frequency Eddy Current (HFEC) 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, right 
wing, for any crack at the 
unrepaired areas. 
Whichever 
occurs first: 
1. Before 
20,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
Within 500 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 15.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, right 
wing, for any crack. (a) 
- 3,000 Flight 
Cycles. 
CONDITION 15.2: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing 
for repair instructions and do the 
repair. 
Before further flight. - 
CONDITION 16: 
NO REPAIR 
FOUND. 
Do an external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, right 
wing, for any crack. 
Whichever 
occurs first: 
1. Before 
20,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
 
Within 500 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
-

### Page 31

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 28 of 162 
Aviation Partners Boeing Proprietary 
Group 4: 
Table 8: Inspection of the Outboard Lower Wing Skin Right Wing at Stringers S-9 and S-10 
Condition Action Compliance Time  
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 16.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, right 
wing, for any crack. 
- 3,000 Flight 
Cycles. 
CONDITION 16.2: 
ANY CRACK 
FOUND. 
CONDITION 16.2 (ACTION 1): 
Contact Aviation Partners Boeing 
for repair instructions and do the 
repair. 
Before further flight. - 
CONDITION 16.2 (ACTION 2): 
Repeat the external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, right 
wing, for any crack. (a) 
- 3,000 Flight 
Cycles. 
(a) It is not required to do the exte rnal surface HFEC inspection in areas where a repair covers the affected 
inspection zone if the repair meets the conditions that follow: 
1. The repair is the corrective action to the outboard lower wing skin crack condition identified in Service 
Bulletin AP737-57-022 and installed after the Original Issue date of Service Bulletin AP737-57-022 AND 
2. The installed repair was approved by a FAA DER for the Blended Winglet provisioned configuration via a 
FAA Form 8110-3.

### Page 32

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 29 of 162 
Aviation Partners Boeing Proprietary 
Group 5: 
Table 9: Inspection of the Outboard Lower Wing Skin Left Wing at Stringers S-9 and S-10 
Condition Action Compliance Time  
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
All Airplanes. Do an external general visual 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, left 
wing, for any repair. 
Whichever 
occurs first: 
1. Before 
25,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours. 
Within 3,000 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 17: 
ANY REPAIR 
FOUND. 
CONDITION 17 (ACTION 1): 
Contact Aviation Partners Boeing 
for alternative inspection(s) and 
corrective action instruction(s), and 
do the alternative inspection(s) and 
applicable on-condition corrective 
action(s). 
Whichever 
occurs first: 
1. Before 
25,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
Within 3,000 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 17 (ACTION 2): 
Do an external surface High 
Frequency Eddy Current (HFEC) 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, left 
wing, for any crack at the 
unrepaired areas. 
Whichever 
occurs first: 
1. Before 
25,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
Within 3,000 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 17.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, left 
wing, for any crack. (a) 
- 3,600 Flight 
Cycles. 
CONDITION 17.2: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing 
for repair instructions and do the 
repair. 
Before further flight. - 
CONDITION 18: 
NO REPAIR 
FOUND. 
Do an external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, left 
wing, for any crack. 
Whichever 
occurs first: 
1. Before 
25,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
 
Within 3,000 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
-

### Page 33

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 30 of 162 
Aviation Partners Boeing Proprietary 
Group 5: 
Table 9: Inspection of the Outboard Lower Wing Skin Left Wing at Stringers S-9 and S-10 
Condition Action Compliance Time  
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 18.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, left 
wing, for any crack. 
- 3,600 Flight 
Cycles. 
CONDITION 18.2: 
ANY CRACK 
FOUND. 
CONDITION 18.2 (ACTION 1): 
Contact Aviation Partners Boeing 
for repair instructions and do the 
repair. 
Before further flight. - 
CONDITION 18.2 (ACTION 2): 
Repeat the external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, left 
wing, for any crack. (a) 
- 3,600 Flight 
Cycles. 
(a) It is not required to do the exte rnal surface HFEC inspection in areas where a repair covers the affected 
inspection zone if the repair meets the conditions that follow: 
1. The repair is the corrective action to the outboard lower wing skin crack condition identified in Service 
Bulletin AP737-57-022 and installed after the Original Issue date of Service Bulletin AP737-57-022 AND 
2. The installed repair was approved by a FAA DER for the Blended Winglet provisioned configuration via a 
FAA Form 8110-3.

### Page 34

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 31 of 162 
Aviation Partners Boeing Proprietary 
Group 5: 
Table 10: Inspection of the Outboard Lower Wing Skin Right Wing at Stringers S-9 and S-10 
Condition Action Compliance Time  
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
All Airplanes. Do an external general visual 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, right 
wing, for any repair. 
Whichever 
occurs first: 
1. Before 
25,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours. 
Within 3,000 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 19: 
ANY REPAIR 
FOUND. 
CONDITION 19 (ACTION 1): 
Contact Aviation Partners Boeing 
for alternative inspection(s) and 
corrective action instruction(s), and 
do the alternative inspection(s) and 
applicable on-condition corrective 
action(s). 
Whichever 
occurs first: 
1. Before 
25,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
Within 3,000 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 19 (ACTION 2): 
Do an external surface High 
Frequency Eddy Current (HFEC) 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, right 
wing, for any crack at the 
unrepaired areas. 
Whichever 
occurs first: 
1. Before 
25,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
Within 3,000 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
- 
CONDITION 19.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, right 
wing, for any crack. (a) 
- 3,600 Flight 
Cycles. 
CONDITION 19.2: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing 
for repair instructions and do the 
repair. 
Before further flight. - 
CONDITION 20: 
NO REPAIR 
FOUND. 
Do an external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, right 
wing, for any crack. 
Whichever 
occurs first: 
1. Before 
25,000 Total 
Flight Cycles. 
2. Before 
40,000 Total 
Flight Hours 
 
Within 3,000 
Flight Cycles 
after the 
Original Issue 
date of Service 
Bulletin AP737-
57-022. 
-

### Page 35

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 32 of 162 
Aviation Partners Boeing Proprietary 
Group 5: 
Table 10: Inspection of the Outboard Lower Wing Skin Right Wing at Stringers S-9 and S-10 
Condition Action Compliance Time  
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 20.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, right 
wing, for any crack. 
- 3,600 Flight 
Cycles. 
CONDITION 20.2: 
ANY CRACK 
FOUND. 
CONDITION 20.2 (ACTION 1): 
Contact Aviation Partners Boeing 
for repair instructions and do the 
repair. 
Before further flight. - 
CONDITION 20.2 (ACTION 2): 
Repeat the external surface HFEC 
inspection of the outboard lower 
wing skin at the two most outboard 
fasteners at S-9 and S-10, right 
wing, for any crack. (a) 
- 3,600 Flight 
Cycles. 
(a) It is not required to do the exte rnal surface HFEC inspection in areas where a repair covers the affected 
inspection zone if the repair meets the conditions that follow: 
1. The repair is the corrective action to the outboard lower wing skin crack condition identified in Service 
Bulletin AP737-57-022 and installed after the Original Issue date of Service Bulletin AP737-57-022 AND 
2. The installed repair was approved by a FAA DER for the Blended Winglet provisioned configuration via a 
FAA Form 8110-3.

### Page 36

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 33 of 162 
Aviation Partners Boeing Proprietary 
F. Approval 
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified 
in this service bulletin comply with the applicable regulations and are FAA approved. This service bulletin 
and its approval were based on the airplane as modified by Aviation Partners Boeing (APB) winglet 
retrofit in accordance with FAA STC ST00830SE. 
If an airplane has a non-Boeing modification, non-APB modification, or a repair that affects a component 
or system also affected by this service bulletin, the operator is responsible for obtaining appropriate 
regulatory agency approval before incorporating this service bulletin. 
This service bulletin is also approved for airplanes converted into 737-800BCF under project number 
TS14-0042. 
The manager of the Continued Operational Safety Branch has reviewed and approves the incorporation 
of the post-repair supplemental inspections defined in this service bulletin as an Alternate Method of 
Compliance (AMOC) to the inspection requirements specified in paragraph (g)(1) of AD 2013-19-23 for 
PSEs 57-20-01/02/03/04/05/08-4 and 57-20-04-1 common to the repair area only. All provisions of AD 
2013-19-23 that are not specifically referenced above remain fully applicable and must be complied with 
accordingly. 
G. Manpower 
The tables below show an estimate of the task hours necessary to do the inspections for each wing of the 
airplane. This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with 
operator task hour data if necessary. The estimate does not include lost time. These are some examples 
of lost time: 
x Time to adjust to the workplace 
x Time to schedule the work 
x Time to inspect the work 
x Time to cure the materials 
x Time to make the parts 
x Time to find the tools 
Table 1: Inspection of the Outboard Lower Wing Skin Left Wing at Stringers S-9 and S-10 
Task Number of Persons Task Hours Elapsed Hours 
Open Access 1 0.08 0.08 
FIGURE 1 1 0.20 0.20 
FIGURE 3 1 0.70 0.70 
FIGURE 4 1 0.70 0.70 
Close Access 1 0.08 0.08 
TOTAL FOR LEFT WING 1.76 1.76

### Page 37

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 34 of 162 
Aviation Partners Boeing Proprietary 
Table 2: Inspection of the Outboard Lower Wing Skin Right Wing at Stringers S-9 and S-10 
Task Number of Persons Task Hours Elapsed Hours 
Open Access 1 0.08 0.08 
FIGURE 2 1 0.20 0.20 
FIGURE 5 1 0.70 0.70 
FIGURE 6 1 0.70 0.70 
Close Access 1 0.08 0.08 
TOTAL FOR RIGHT WING 1.76 1.76 
Table 3: Repair of the Outboard Lower Wing Skin Left Wing at Stringer S-9 
Task Number of Persons Task Hours Elapsed Hours 
Open Access 1 1 1 
FIGURE 7 2 52 26 
Close Access 1 1 1 
TOTAL FOR LEFT WING 54 28 
Table 4: Repair of the Outboard Lower Wing Skin Right Wing at Stringer S-9 
Task Number of Persons Task Hours Elapsed Hours 
Open Access 1 1 1 
FIGURE 8 2 52 26 
Close Access 1 1 1 
TOTAL FOR RIGHT WING 54 28 
Table 5: External Inspection of the Outboard Lower Wing Skin Left Wing Repair at Stringer S-9 
Task Number of Persons Task Hours Elapsed Hours 
Open Access 1 0.2 0.2 
FIGURE 9 1 1.5 1.5 
Close Access 1 0.2 0.2 
TOTAL FOR LEFT WING 1.9 1.9 
Table 6: External Inspection of the Outboard Lower Wing Skin Right Wing Repair at Stringer S-9 
Task Number of Persons Task Hours Elapsed Hours 
Open Access 1 0.2 0.2 
FIGURE 10 1 1.5 1.5 
Close Access 1 0.2 0.2 
TOTAL FOR RIGHT WING 1.9 1.9

### Page 38

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 35 of 162 
Aviation Partners Boeing Proprietary 
Table 7: Internal Inspection of the Outboard Lower Wing Skin Left Wing Repair at Stringer S-9 
Task Number of Persons Task Hours Elapsed Hours 
Open Access 1 1 1 
FIGURE 11 1 2 2 
Close Access 1 1 1 
TOTAL FOR LEFT WING 4 4 
Table 8: Internal Inspection of the Outboard Lower Wing Skin Right Wing Repair at Stringer S-9 
Task Number of Persons Task Hours Elapsed Hours 
Open Access 1 1 1 
FIGURE 12 1 2 2 
Close Access 1 1 1 
TOTAL FOR RIGHT WING 4 4

### Page 39

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 36 of 162 
Aviation Partners Boeing Proprietary 
H. Weight and Balance Changes 
Airplane SB Figure Contributing to Weight Change Change in Weight (pounds) Change in Moment (pound-inch) 
737-700 FIGURE 7 +9.5 +7410 
737-700 FIGURE 8 +9.5 +7410 
737-800 FIGURE 7 +9.5 +7410 
737-800 FIGURE 8 +9.5 +7410 
737-700 FIGURE 7 + FIGURE 8 +19.0 +14820 
737-800 FIGURE 7 + FIGURE 8 +19.0 +14820 
 
I. Electrical Load Data 
Not changed. 
J. References 
1. Existing Data: 
a. Boeing Service Letter 737-SL-51-042 
b. Boeing Service Related Problem (SRP) 737-NG-SRP-57-0399 
c. Standard Overhaul Practices Manual (SOPM) 20-1 0-03, 20-50-00, 20-50-11, 20-43-03, 20-44-04 
d. Boeing Aircraft Maintenance Manual (AMM) 20-44- 04, 24-22-00, 28-26-00, 28-11-00, 28-11-11, 
51-21-00 
e. Boeing Fleet Team Digest (FTD) 737NG-FTD-57-22002 
f. Boeing 737NG Structural Repair Manual (SRM) 
g. Boeing 737 Non-Destructive Testing (NDT) Manual Part 4, and Part 6 
2. Data Supplied with this Service Bulletin: 
None. 
3. Installation Drawings Used in the Prep aration of this Service Bulletin: 
Drawing Number Title 
112A2001 FASTENER INSTL – FRONT SPAR/WING SKIN INTERFACE 
112A4001 PANEL INSTL – LOWER, SECTION 12, WING 
110A1504 WING STRINGER DIAGRAM, LOWER 737-X 
737-7400 MOD INSTL – FATIGUE LIFE IMPROVEMENT LOWER SKIN 
737-8400 MOD INSTL – FATIGUE LIFE IMPROVEMENT LOWER SKIN 
The table above lists applicable drawing(s) used to prepare this service bulletin. The drawing(s) are not 
necessary to make the specified changes, and are not supplied with this service bulletin. The drawing(s) 
may not be applicable to all airplane configurations or operators.

### Page 40

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 37 of 162 
Aviation Partners Boeing Proprietary 
K. Publications Affected 
1. Publications 
None. 
2. Damage Tolerance Based Structural Inspections: 
Aviation Partners Boeing has evaluated the repairs and/or changes in this service bulletin for effects 
on Fatigue Critical Structure (FCS) and for changes to Damage Tolera nce Inspections (DTI) required 
in the Maintenance Program. This service bulletin affects FCS, but no new DTIs are necessary. 
L. Interchangeability and Intermixability of Parts 
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts. 
M. Software Accomplishment Summary 
Not affected.

### Page 41

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 38 of 162 
Aviation Partners Boeing Proprietary 
2. MATERIAL INFORMATION 
A. Material – Price and Availability 
None. 
B. Industry Support Information 
Aviation Partners Boeing (APB) warranty remedies are not available for the inspection and/or repair 
procedures given in this service bulletin. 
C. Parts Necessary for Each Airplane 
1. Kits/Parts 
None. 
2. Parts and Materials Supplied by the Operator: 
Material/Part No. Description QTY per Wing QTY per SS 
2024-T3 bare sheet per AMS-QQ-A-250/4 
.125 x 36 x 14 Doubler* 1 2 
2024-T3 bare sheet per AMS-QQ-A-250/4 
.125 x 30 x 14 
Tripler* 1 2 
2024-T3 bare sheet per AMS-QQ-A-250/4 Filler** 1 2 
BACB30LX6A9 Hex Drive Bolt – Oversize 2 4 
BACB30LX6A10 Hex Drive Bolt – Oversize 4 8 
BACB30LX6A11 Hex Drive Bolt – Oversize 48 96 
BACB30LX6A12 Hex Drive Bolt – Oversize 3 6 
BACC30BH6 Collar – Tension 61 122 
BACB30LX6A13 Hex Drive Bolt – Oversize 4 8 
BACB30NW10K7X Hex Drive Bolt –Oversize 4 8 
BACB30NW10K8X Hex Drive Bolt –Oversize 19 38 
BACB30NW10K9X Hex Drive Bolt –Oversize 14 28 
BACN10WM5 Nut – Self Sealing 37 74

### Page 42

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 39 of 162 
Aviation Partners Boeing Proprietary 
Material/Part No. Description QTY per Wing QTY per SS 
BACB30NW8K8X Hex Drive Bolt – Oversize 2 4 
BACB30NW8K9X Hex Drive Bolt – Oversize 39 78 
BACB30NW8K10X Hex Drive Bolt – Oversize 11 22 
BACN10WM4 Nut – Self Sealing 52 104 
BACB30NW8K4 Hex Drive Bolt 2 4 
BACB30NW8K6 Hex Drive Bolt 15 30 
BACB30NW8K8 Hex Drive Bolt 16 32 
BACN10WM4 Nut – Self Sealing 33 66 
BACB30WQ4K6L Radius Lead-in Bolt 3 6 
BACN10TN4K Nut – Self Sealing 3 6 
BACB30WQ3K9L† Radius Lead-in Bolt - - 
BACB30WQ3K10L† Radius Lead-in Bolt - - 
BACB30WQ3K11L† Radius Lead-in Bolt - - 
BACB30WQ3K12L† Radius Lead-in Bolt - - 
BACB30WQ3K9LX† Radius Lead-in Bolt – Oversize - - 
BACB30WQ3K10LX† Radius Lead-in Bolt – Oversize - - 
BACB30WQ3K11LX† Radius Lead-in Bolt – Oversize - - 
BACB30WQ3K12LX† Radius Lead-in Bolt – Oversize - - 
BACN10TN3K† Nut – Self Sealing - - 
BACN10HY3M† Nut – Self Locking - - 
BACW10AW3AST† Washer – Oversize - - 
BACB30LY6A13† Hex Drive Bolt – Second Oversize - - 
BACC30AC6† Collar – Tension - - 
BMS10-79, TYPE III PRIMER - - 
BMS10-20 TYPE II PRIMER - - 
BMS10-60 TYPE II ENAMEL - -

### Page 43

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 40 of 162 
Aviation Partners Boeing Proprietary 
Material/Part No. Description QTY per Wing QTY per SS 
BONDERITE M-CR 600 AERO CHEMICAL COATING - - 
BMS5-45 SEALANT - - 
BMS5-95† SEALANT - - 
BMS5-142 SEALANT - - 
* Material dimensions include excess material, trim as required. 
** Stock thickness of bare sheet shall be determined by the thickness of the lower skin 
panel in the area of the trim out as shown in Figure 7 and Figure 8, (Sheet 4 of 11). 
† These parts are considered alternate hardware options and may not be required for 
completing the repair actions in this service bulletin. Confirm if these parts are required 
and/or eligible for use before ordering. See Figure 7 and Figure 8, (Sheet 10 of 11), fastener 
code 'A' and 'B', notes (d) and (e), for more information. 
3. Parts Modified and Re-identified. 
None. 
4. Parts Removed and Not Replaced 
None 
D. Parts Necessary to Change Spares 
None. 
E. Special Tooling – Price Availability 
None. 
F. Special Tooling Necessary to  do this Service Bulletin 
No special tools or equipment are necessary to do the change in this service bulletin. But, maintenance 
and overhaul tools in the manuals given in Paragraph 1.J., References, can be necessary. Examine 
operator tool supply to make sure all necessary tools are available.

### Page 44

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 41 of 162 
Aviation Partners Boeing Proprietary 
3. ACCOMPLISHMENT INSTRUCTIONS 
A. GENERAL INFORMATION 
 
NOTE: 
1. If this Service Bulletin (SB) is mandated by an Airworthiness Directive (AD), then all applicable 
requirements specified in the SB must be done. Th erefore, an Alternative Method of Compliance 
(AMOC) is required for any deviations to the steps in this service bulletin, including sub-steps and 
identified figures. 
2. The compliance times for the actions in WORK INSTRUCTIONS are in 1.E., Compliance. 
3. Unless shown differently, these dim ensions and tolerances are used: 
– Linear dimensions are in inches 
– Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus 0.03 
inch 
– Tolerance on rivet and bolt edge marg in is plus or minus 0.05 inch 
– Angular tolerance is plus or minus 2 degrees 
– Hole dimensions for standard solid rivets and fasteners are in Structural Repair Manual 
(SRM) Chapter 51 
– Torque Values: 
– Values for structural fasteners are given in 737 Structural Repair Manual, Chapter 51. 
– Values for airframe maintenance tasks are included in Chapter 20 of 737 Aircraft 
Maintenance Manual (AMM). 
– Values for electrical maintenance tasks are included in Chapter 20 of Standard Wiring 
Practices Manual (SWPM). 
– Values for engine maintenance tasks are included in Chapter 70 of 737 Aircraft Maintenance 
Manual (AMM). 
– Non-standard torque values for maintenance tasks are included in the applicable installation 
step. 
4. These work instructions refer to procedures included in other Boeing documents. When the words 
"refer to" are used and the operator has an accepted alternative procedure, the accepted alternative 
procedure can be used. When the wo rds "in accordance with" are included in the instruction, the 
procedure in the Boeing document must be used. 
5. If it is necessary to remove more parts for access, you can remove those parts. If you can get 
access without removing identified parts, it is not necessary to remove all of the identified parts. 
Jacking and shoring limitations must be observed. 
6. Use approved fastener, process and material substitutions in accordance with SRM Chapter 51.

### Page 45

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 42 of 162 
Aviation Partners Boeing Proprietary 
7. A General Visual Inspection (GVI) is defined as: A visual examination of an interior or exterior area, 
installation or assembly to detect obvious damage, failure or irregularity. This level of inspection is 
made from within touching distance, unless otherwis e specified. A mirror may be necessary to 
enhance visual access to all exposed surfaces in the inspection area. This level of inspection is 
made under normally available lighting conditions such as daylight, hangar ligh ting, flashlight or 
drop-light and may require removal or opening of access panels or d oors. Stands, ladders or 
platforms may be required to gain proximity to the area being checked. 
8. When more than one OPTION is given for a CO NDITION, do only one of the OPTION numbers. 
When more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION 
numbers for that CONDITION or OPTION. 
9. Use of colors in Figures is  based on guidance from the ATA e-Business Program (ATA) iSpec 
2200. 
10. Manual titles are referred to by acronyms. Refer to Paragraph 1.J., References, for definition of the 
acronyms. 
11. Obey all of the warnings and cautions given in the specified manual sections. 
12. Refer to APPENDIX A, APPENDIX B, APPENDIX C, APPENDIX D, APPENDIX E, APPENDIX F, 
APPENDIX G, APPENDIX H, APPENDIX I, and APPENDIX J of Service Bulletin AP737-57-022 for 
logic diagrams. Logic diagrams are provided as an  aid only. Information contained in 1.E., 
Compliance is the primary source for compliance ti mes. Information in Work Instructions of this 
service bulletin is the primary source for tasks required for compliance. 
13. If the length of any fastener specified in this  service bulletin does not meet installation standards 
given in 737NG SRM Chapter 51, then a fastener of the same specification with a length which 
meets the installation standards given in SRM 51-40-02 may be used. In addition, washers may be 
installed for fastener grip length in accordance  with SRM 51-40-02. Do not use washers under 
BACN10TN and BACN10WM seal nuts. 
14. The repair actions in this serv ice bulletin shall meet lightning, electrical wiring and equipment fault 
current, and electrostatic discharge requirements in 737NG SRM 51-80-01. 
15. Basic cleaning may be required to ensure appropriate visibility.

### Page 46

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 43 of 162 
Aviation Partners Boeing Proprietary 
B. WORK INSTRUCTIONS 
Actions Required for Compliance 
 
1. Requirements. 
 
Group 1 
Table 1: Inspection of the Outboard Lower Wing Skin Left Wing at Stringers S-9 and S-10 
Condition Action Method of 
Compliance 
Refer to the listed 
procedures in AP737-57-
022 original issue or later 
approved revisions as an 
accepted procedure 
All Airplanes. Do an external general visual inspection 
of the outboard lower wing skin at S-9 and 
S-10 in the area defined by FIGURE 1, 
left wing, for any repair. 
- Do PART 1: OPEN 
ACCESS - LEFT WING. 
FIGURE 1 - 
CONDITION 1: 
ANY REPAIR 
FOUND. 
CONDITION 1 (ACTION 1): 
Contact Aviation Partners Boeing for 
alternative inspection(s) and corrective 
action instruction(s) and do the alternative 
inspection(s) and applicable on-condition 
corrective action(s). 
- - 
CONDITION 1 (ACTION 2): 
Do an external surface High Frequency 
Eddy Current (HFEC) inspection of the 
outboard lower wing skin at the two most 
outboard fasteners at S-9 and S-10, left 
wing, for any crack at the unrepaired 
areas. 
FIGURE 3 and 
FIGURE 4 
- 
CONDITION 1.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower wing skin 
at the two most outboard fasteners at S-9 
and S-10, left wing, for any crack. (a) 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
FIGURE 3 and 
FIGURE 4 
- 
CONDITION 1.2: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing for 
repair instructions and do the repair. 
- - 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
CONDITION 2: 
NO REPAIR 
FOUND. 
Do an external surface HFEC inspection 
of the outboard lower wing skin at the two 
most outboard fasteners at S-9 and S-10, 
left wing, for any crack. 
FIGURE 3 and 
FIGURE 4 
- 
CONDITION 2.1: 
NO CRACK 
FOUND AT S-9. 
Repeat the external surface HFEC 
inspection of the outboard lower wing skin 
at the two most outboard fasteners at S-9, 
left wing, for any crack. 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
FIGURE 3 -

### Page 47

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 44 of 162 
Aviation Partners Boeing Proprietary 
Group 1 
Table 1: Inspection of the Outboard Lower Wing Skin Left Wing at Stringers S-9 and S-10 
Condition Action Method of 
Compliance 
Refer to the listed 
procedures in AP737-
57-022 original issue 
or later approved 
revisions as an 
accepted procedure 
CONDITION 2.2: 
ANY CRACK FOUND 
AT S-9. 
Verify if the skin cutout and repair action in 
FIGURE 7 is applicable to the on plane crack 
condition. 
- - 
CONDITION 2.2.1: 
ANY CRACK 
OUTSIDE OF THE 
BOUNDARY OF THE 
SKIN CUTOUT. 
Contact Aviation Partners Boeing for repair 
instructions and do the repair. 
- - 
- Do PART 3: CLOSE 
ACCESS - LEFT WING 
CONDITION 2.2.2: 
ANY CRACK WITHIN 
THE BOUNDARY OF 
THE SKIN CUTOUT. 
CONDITION 2.2.2 (ACTION 1): Do the crack 
removal and repair. 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
FIGURE 7 - 
CONDITION 2.2.2 (ACTION 2): Do an external 
surface Low Frequency Eddy Current (LFEC) 
inspection of the outboard lower wing skin under 
the repair doubler and an external surface HFEC 
inspection of the outboard lower wing skin at the 
periphery of the repair doubler. 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
FIGURE 9 - 
CONDITION 2.2.2 (ACTION 3): Do an internal 
surface HFEC inspection of the S-8 and S-9 skin 
flange, internal surface HFEC inspection of the 
visible front spar chord, and Ultrasonic Testing 
(UT) inspection of the hidden front spar chord. 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
FIGURE 11 - 
CONDITION 2.2.2.1: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing for repair 
instructions and do the repair. 
- - 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
CONDITION 2.3: 
NO CRACK FOUND 
AT S-10. 
Repeat the external surface HFEC inspection of 
the outboard lower wing skin at the two most 
outboard fasteners at S-10, left wing, for any 
crack. 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
FIGURE 4 - 
CONDITION 2.4: 
ANY CRACK FOUND 
AT S-10. 
Contact Aviation Partners Boeing for repair 
instructions and do the repair. 
- - 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
(a) It is not required to do the external surface HFEC inspection in areas where a repair covers the affected 
inspection zone if the repair meets the conditions that follow: 
1. The repair is the corrective action to the outboard  lower wing skin crack condition identified in Service 
Bulletin AP737-57-022 and installed after the Original Issue date of Service Bulletin AP737-57-022 AND 
2. The installed repair was approved by a FAA DER for the Split Scimitar Winglet provisioned configuration via 
a FAA Form 8110-3.

### Page 48

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 45 of 162 
Aviation Partners Boeing Proprietary 
Group 1 
Table 2: Inspection of the Outboard Lower Wing Skin Right Wing at Stringers S-9 and S-10 
Condition Action Method of 
Compliance 
Refer to the listed 
procedures in AP737-57-
022 original issue or later 
approved revisions as an 
accepted procedure 
All Airplanes. Do an external general visual inspection 
of the outboard lower wing skin at S-9 and 
S-10 in the area defined by FIGURE 2, 
right wing, for any repair. 
- Do PART 2: OPEN 
ACCESS - RIGHT WING. 
FIGURE 2 - 
CONDITION 3: 
ANY REPAIR 
FOUND. 
CONDITION 3 (ACTION 1): 
Contact Aviation Partners Boeing for 
alternative inspection(s) and corrective 
action instruction(s) and do the alternative 
inspection(s) and applicable on-condition 
corrective action(s). 
- - 
CONDITION 3 (ACTION 2): 
Do an external surface High Frequency 
Eddy Current (HFEC) inspection of the 
outboard lower wing skin at the two most 
outboard fasteners at S-9 and S-10, right 
wing, for any crack at the unrepaired 
areas. 
FIGURE 5 and 
FIGURE 6 
- 
CONDITION 3.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower wing skin 
at the two most outboard fasteners at S-9 
and S-10, right wing, for any crack. (a) 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
FIGURE 5 and 
FIGURE 6 
- 
CONDITION 3.2: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing for 
repair instructions and do the repair. 
- - 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
CONDITION 4: 
NO REPAIR 
FOUND. 
Do an external surface HFEC inspection 
of the outboard lower wing skin at the two 
most outboard fasteners at S-9 and S-10, 
right wing, for any crack. 
FIGURE 5 and 
FIGURE 6 
- 
CONDITION 4.1: 
NO CRACK 
FOUND AT S-9. 
Repeat the external surface HFEC 
inspection of the outboard lower wing skin 
at the two most outboard fasteners at S-9, 
right wing, for any crack. 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
FIGURE 5 -

### Page 49

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 46 of 162 
Aviation Partners Boeing Proprietary 
Group 1 
Table 2: Inspection of the Outboard Lower Wing Skin Right Wing at Stringers S-9 and S-10 
Condition Action Method of 
Compliance 
Refer to the listed 
procedures in AP737-57-
022 original issue or later 
approved revisions as an 
accepted procedure 
CONDITION 4.2: 
ANY CRACK FOUND 
AT S-9. 
Verify if the skin cutout and repair action in 
FIGURE 8 is applicable to the on plane crack 
condition. 
- - 
CONDITION 4.2.1: 
ANY CRACK 
OUTSIDE OF THE 
BOUNDARY OF THE 
SKIN CUTOUT. 
Contact Aviation Partners Boeing for repair 
instructions and do the repair. 
- - 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING 
CONDITION 4.2.2: 
ANY CRACK WITHIN 
THE BOUNDARY OF 
THE SKIN CUTOUT. 
CONDITION 4.2.2 (ACTION 1): Do the crack 
removal and repair. 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
FIGURE 8 - 
CONDITION 4.2.2 (ACTION 2): Do an external 
surface Low Frequency Eddy Current (LFEC) 
inspection of the outboard lower wing skin under 
the repair doubler and an external surface HFEC 
inspection of the outboard lower wing skin at the 
periphery of the repair doubler. 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
FIGURE 10 - 
CONDITION 4.2.2 (ACTION 3): Do an internal 
surface HFEC inspection of the S-8 and S-9 skin 
flange, internal surface HFEC inspection of the 
visible front spar chord, and Ultrasonic Testing 
(UT) inspection of the hidden front spar chord. 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
FIGURE 12 - 
CONDITION 4.2.2.1: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing for repair 
instructions and do the repair. 
- - 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
CONDITION 4.3: 
NO CRACK FOUND 
AT S-10. 
Repeat the external surface HFEC inspection of 
the outboard lower wing skin at the two most 
outboard fasteners at S-10, right wing, for any 
crack. 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
FIGURE 6 - 
CONDITION 4.4: 
ANY CRACK FOUND 
AT S-10. 
Contact Aviation Partners Boeing for repair 
instructions and do the repair. 
- - 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
(a) It is not required to do the external surface HFEC inspec tion in areas where a repair covers the affected inspection 
zone if the repair meets the conditions that follow: 
1. The repair is the corrective action to the outboard lower wing skin crack condition identified in Service Bulletin 
AP737-57-022 and installed after the Original Issue date of Service Bulletin AP737-57-022 AND 
2. The installed repair was approved by a FAA DER for the Split Scimitar Winglet provisioned configuration via a 
FAA Form 8110-3.

### Page 50

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 47 of 162 
Aviation Partners Boeing Proprietary 
Group 2 
Table 3: Inspection of the Outboard Lower Wing Skin Left Wing at Stringers S-9 and S-10 
Condition Action Method of 
Compliance 
Refer to the listed 
procedures in AP737-57-
022 original issue or later 
approved revisions as an 
accepted procedure 
All Airplanes. Do an external general visual inspection 
of the outboard lower wing skin at S-9 and 
S-10 in the area defined by FIGURE 1, 
left wing, for any repair. 
- Do PART 1: OPEN 
ACCESS - LEFT WING. 
FIGURE 1 - 
CONDITION 5: 
ANY REPAIR 
FOUND. 
CONDITION 5 (ACTION 1): 
Contact Aviation Partners Boeing for 
alternative inspection(s) and corrective 
action instruction(s) and do the alternative 
inspection(s) and applicable on-condition 
corrective action(s). 
- - 
CONDITION 5 (ACTION 2): 
Do an external surface High Frequency 
Eddy Current (HFEC) inspection of the 
outboard lower wing skin at the two most 
outboard fasteners at S-9 and S-10, left 
wing, for any crack at the unrepaired 
areas. 
FIGURE 3 and 
FIGURE 4 
- 
CONDITION 5.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower wing skin 
at the two most outboard fasteners at S-9 
and S-10, left wing, for any crack. (a) 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
FIGURE 3 and 
FIGURE 4 
- 
CONDITION 5.2: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing for 
repair instructions and do the repair. 
- - 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
CONDITION 6: 
NO REPAIR 
FOUND. 
Do an external surface HFEC inspection 
of the outboard lower wing skin at the two 
most outboard fasteners at S-9 and S-10, 
left wing, for any crack. 
FIGURE 3 and 
FIGURE 4 
- 
CONDITION 6.1: 
NO CRACK 
FOUND AT S-9. 
Repeat the external surface HFEC 
inspection of the outboard lower wing skin 
at the two most outboard fasteners at S-9, 
left wing, for any crack. 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
FIGURE 3 -

### Page 51

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 48 of 162 
Aviation Partners Boeing Proprietary 
Group 2 
Table 3: Inspection of the Outboard Lower Wing Skin Left Wing at Stringers S-9 and S-10 
Condition Action Method of 
Compliance 
Refer to the listed 
procedures in AP737-
57-022 original issue 
or later approved 
revisions as an 
accepted procedure 
CONDITION 6.2: 
ANY CRACK FOUND 
AT S-9. 
Verify if the skin cutout and repair action in 
FIGURE 7 is applicable to the on plane crack 
condition. 
- - 
CONDITION 6.2.1: 
ANY CRACK 
OUTSIDE OF THE 
BOUNDARY OF THE 
SKIN CUTOUT. 
Contact Aviation Partners Boeing for repair 
instructions and do the repair. 
- - 
- Do PART 3: CLOSE 
ACCESS - LEFT WING 
CONDITION 6.2.2: 
ANY CRACK WITHIN 
THE BOUNDARY OF 
THE SKIN CUTOUT. 
CONDITION 6.2.2 (ACTION 1): Do the crack 
removal and repair. 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
FIGURE 7 - 
CONDITION 6.2.2 (ACTION 2): Do an external 
surface Low Frequency Eddy Current (LFEC) 
inspection of the outboard lower wing skin under 
the repair doubler and an external surface HFEC 
inspection of the outboard lower wing skin at the 
periphery of the repair doubler. 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
FIGURE 9 - 
CONDITION 6.2.2 (ACTION 3): Do an internal 
surface HFEC inspection of the S-8 and S-9 skin 
flange, internal surface HFEC inspection of the 
visible front spar chord, and Ultrasonic Testing 
(UT) inspection of the hidden front spar chord. 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
FIGURE 11 - 
CONDITION 6.2.2.1: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing for repair 
instructions and do the repair. 
- - 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
CONDITION 6.3: 
NO CRACK FOUND 
AT S-10. 
Repeat the external surface HFEC inspection of 
the outboard lower wing skin at the two most 
outboard fasteners at S-10, left wing, for any 
crack. 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
FIGURE 4 - 
CONDITION 6.4: 
ANY CRACK FOUND 
AT S-10. 
Contact Aviation Partners Boeing for repair 
instructions and do the repair. 
- - 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
(a) It is not required to do the external surface HFEC inspection in areas where a repair covers the affected 
inspection zone if the repair meets the conditions that follow: 
1. The repair is the corrective action to the outboard  lower wing skin crack condition identified in Service 
Bulletin AP737-57-022 and installed after the Original Issue date of Service Bulletin AP737-57-022 AND 
2. The installed repair was approved by a FAA DER for the Split Scimitar Winglet provisioned configuration via 
a FAA Form 8110-3.

### Page 52

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 49 of 162 
Aviation Partners Boeing Proprietary 
Group 2 
Table 4: Inspection of the Outboard Lower Wing Skin Right Wing at Stringers S-9 and S-10 
Condition Action Method of 
Compliance 
Refer to the listed 
procedures in AP737-57-
022 original issue or later 
approved revisions as an 
accepted procedure 
All Airplanes. Do an external general visual inspection 
of the outboard lower wing skin at S-9 and 
S-10 in the area defined by FIGURE 2, 
right wing, for any repair. 
- Do PART 2: OPEN 
ACCESS - RIGHT WING. 
FIGURE 2 - 
CONDITION 7: 
ANY REPAIR 
FOUND. 
CONDITION 7 (ACTION 1): 
Contact Aviation Partners Boeing for 
alternative inspection(s) and corrective 
action instruction(s) and do the alternative 
inspection(s) and applicable on-condition 
corrective action(s). 
- - 
CONDITION 7 (ACTION 2): 
Do an external surface High Frequency 
Eddy Current (HFEC) inspection of the 
outboard lower wing skin at the two most 
outboard fasteners at S-9 and S-10, right 
wing, for any crack at the unrepaired 
areas. 
FIGURE 5 and 
FIGURE 6 
- 
CONDITION 7.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower wing skin 
at the two most outboard fasteners at S-9 
and S-10, right wing, for any crack. (a) 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
FIGURE 5 and 
FIGURE 6 
- 
CONDITION 7.2: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing for 
repair instructions and do the repair. 
- - 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
CONDITION 8: 
NO REPAIR 
FOUND. 
Do an external surface HFEC inspection 
of the outboard lower wing skin at the two 
most outboard fasteners at S-9 and S-10, 
right wing, for any crack. 
FIGURE 5 and 
FIGURE 6 
- 
CONDITION 8.1: 
NO CRACK 
FOUND AT S-9. 
Repeat the external surface HFEC 
inspection of the outboard lower wing skin 
at the two most outboard fasteners at S-9, 
right wing, for any crack. (a) 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
FIGURE 5 -

### Page 53

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 50 of 162 
Aviation Partners Boeing Proprietary 
Group 2 
Table 4: Inspection of the Outboard Lower Wing Skin Right Wing at Stringers S-9 and S-10 
Condition Action Method of 
Compliance 
Refer to the listed 
procedures in AP737-57-
022 original issue or 
later approved revisions 
as an accepted 
procedure 
CONDITION 8.2: 
ANY CRACK FOUND 
AT S-9. 
Verify if the skin cutout and repair action in 
FIGURE 8 is applicable to the on plane crack 
condition. 
- - 
CONDITION 8.2.1: 
ANY CRACK 
OUTSIDE OF THE 
BOUNDARY OF THE 
SKIN CUTOUT. 
Contact Aviation Partners Boeing for repair 
instructions and do the repair. 
- - 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING 
CONDITION 8.2.2: 
ANY CRACK WITHIN 
THE BOUNDARY OF 
THE SKIN CUTOUT. 
CONDITION 8.2.2 (ACTION 1): Do the crack 
removal and repair. 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
FIGURE 8 - 
CONDITION 8.2.2 (ACTION 2): Do an external 
surface Low Frequency Eddy Current (LFEC) 
inspection of the outboard lower wing skin under 
the repair doubler and an external surface HFEC 
inspection of the outboard lower wing skin at the 
periphery of the repair doubler. 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
FIGURE 10 - 
CONDITION 8.2.2 (ACTION 3): Do an internal 
surface HFEC inspection of the S-8 and S-9 skin 
flange, internal surface HFEC inspection of the 
visible front spar chord, and Ultrasonic Testing 
(UT) inspection of the hidden front spar chord. 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
FIGURE 12 - 
CONDITION 8.2.2.1: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing for repair 
instructions and do the repair. 
- - 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
CONDITION 8.3: 
NO CRACK FOUND 
AT S-10. 
Repeat the external surface HFEC inspection of 
the outboard lower wing skin at the two most 
outboard fasteners at S-10, right wing, for any 
crack. 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
FIGURE 6 - 
CONDITION 8.4: 
ANY CRACK FOUND 
AT S-10. 
Contact Aviation Partners Boeing for repair 
instructions and do the repair. 
- - 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
(a) It is not required to do the external surface HFEC inspec tion in areas where a repair covers the affected inspection 
zone if the repair meets the conditions that follow: 
1. The repair is the corrective action to the outboard lower wing skin crack condition identified in Service Bulletin 
AP737-57-022 and installed after the Original Issue date of Service Bulletin AP737-57-022 AND 
2. The installed repair was approved by a FAA DER for the Split Scimitar Winglet provisioned configuration via a 
FAA Form 8110-3.

### Page 54

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 51 of 162 
Aviation Partners Boeing Proprietary 
Group 3 
Table 5: Inspection of the Outboard Lower Wing Skin Left Wing at Stringers S-9 and S-10 
Condition Action Method of 
Compliance 
Refer to the listed 
procedures in AP737-57-
022 original issue or later 
approved revisions as an 
accepted procedure 
All Airplanes. Do an external general visual inspection 
of the outboard lower wing skin at the two 
most outboard fasteners at S-9 and S-10, 
left wing, for any repair. 
- Do PART 1: OPEN 
ACCESS - LEFT WING. 
FIGURE 1 - 
CONDITION 9: 
ANY REPAIR 
FOUND. 
CONDITION 9 (ACTION 1): 
Contact Aviation Partners Boeing for 
alternative inspection(s) and corrective 
action instruction(s) and do the alternative 
inspection(s) and applicable on-condition 
corrective action(s). 
- - 
CONDITION 9 (ACTION 2): 
Do an external surface High Frequency 
Eddy Current (HFEC) inspection of the 
outboard lower wing skin at the two most 
outboard fasteners at S-9 and S-10, left 
wing, for any crack at the unrepaired 
areas. 
FIGURE 3 and 
FIGURE 4 
- 
CONDITION 9.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower wing skin 
at the two most outboard fasteners at S-9 
and S-10, left wing, for any crack. (a) 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
FIGURE 3 and 
FIGURE 4 
- 
CONDITION 9.2: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing for 
repair instructions and do the repair. 
- - 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
CONDITION 10: 
NO REPAIR 
FOUND. 
Do an external surface HFEC inspection 
of the outboard lower wing skin at the two 
most outboard fasteners at S-9 and S-10, 
left wing, for any crack. 
FIGURE 3 and 
FIGURE 4 
- 
CONDITION 10.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower wing skin 
at the two most outboard fasteners at S-9 
and S-10, left wing, for any crack. (a) 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
FIGURE 3 and 
FIGURE 4 
-

### Page 55

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 52 of 162 
Aviation Partners Boeing Proprietary 
Group 3 
Table 5: Inspection of the Outboard Lower Wing Skin Left Wing at Stringers S-9 and S-10 
Condition Action Method of 
Compliance 
Refer to the listed 
procedures in AP737-57-
022 original issue or later 
approved revisions as an 
accepted procedure 
CONDITION 10.2: 
ANY CRACK 
FOUND. 
CONDITION 10.2 (ACTION 1): 
Contact Aviation Partners Boeing for 
repair instructions and do the repair. 
- - 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
CONDITION 10.2 (ACTION 2): 
Repeat the external surface HFEC 
inspection of the outboard lower wing skin 
at the two most outboard fasteners at S-9 
and S-10, left wing, for any crack. (a) 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
FIGURE 3 and 
FIGURE 4 
- 
(a) It is not required to do the extern al surface HFEC inspection in areas where a repair covers the affected 
inspection zone if the repair meets the conditions that follow: 
1. The repair is the corrective action to the outboar d lower wing skin crack condition identified in Service 
Bulletin AP737-57-022 and installed after the Original Issue date of Service Bulletin AP737-57-022 AND 
2. The installed repair was approved by a FAA DE R for the Split Scimitar Winglet provisioned configuration 
via a FAA Form 8110-3.

### Page 56

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 53 of 162 
Aviation Partners Boeing Proprietary 
Group 3 
Table 6: Inspection of the Outboard Lower Wing Skin Right Wing at Stringers S-9 and S-10 
Condition Action Method of 
Compliance 
Refer to the listed 
procedures in AP737-57-
022 original issue or later 
approved revisions as an 
accepted procedure 
All Airplanes. Do an external general visual inspection 
of the outboard lower wing skin at the two 
most outboard fasteners at S-9 and S-10, 
right wing, for any repair. 
- Do PART 2: OPEN 
ACCESS - RIGHT WING. 
FIGURE 2 - 
CONDITION 11: 
ANY REPAIR 
FOUND. 
CONDITION 11 (ACTION 1): 
Contact Aviation Partners Boeing for 
alternative inspection(s) and corrective 
action instruction(s) and do the alternative 
inspection(s) and applicable on-condition 
corrective action(s). 
- - 
CONDITION 11 (ACTION 2): 
Do an external surface High Frequency 
Eddy Current (HFEC) inspection of the 
outboard lower wing skin at the two most 
outboard fasteners at S-9 and S-10, right 
wing, for any crack at the unrepaired 
areas. 
FIGURE 5 and 
FIGURE 6 
- 
CONDITION 11.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower wing skin 
at the two most outboard fasteners at S-9 
and S-10, right wing, for any crack. (a) 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
FIGURE 5 and 
FIGURE 6 
- 
CONDITION 11.2: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing for 
repair instructions and do the repair. 
- - 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
CONDITION 12: 
NO REPAIR 
FOUND. 
Do an external surface HFEC inspection 
of the outboard lower wing skin at the two 
most outboard fasteners at S-9 and S-10, 
right wing, for any crack. 
FIGURE 5 and 
FIGURE 6 
- 
CONDITION 12.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower wing skin 
at the two most outboard fasteners at S-9 
and S-10, right wing, for any crack. (a) 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
FIGURE 5 and 
FIGURE 6 
-

### Page 57

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 54 of 162 
Aviation Partners Boeing Proprietary 
Group 3 
Table 6: Inspection of the Outboard Lower Wing Skin Right Wing at Stringers S-9 and S-10 
Condition Action Method of 
Compliance 
Refer to the listed 
procedures in AP737-57-
022 original issue or later 
approved revisions as an 
accepted procedure 
CONDITION 12.2: 
ANY CRACK 
FOUND. 
CONDITION 12.2 (ACTION 1): 
Contact Aviation Partners Boeing for 
repair instructions and do the repair. 
- - 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
CONDITION 12.2 (ACTION 2): 
Repeat the external surface HFEC 
inspection of the outboard lower wing skin 
at the two most outboard fasteners at S-9 
and S-10, right wing, for any crack. (a) 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
FIGURE 5 and 
FIGURE 6 
- 
(a) It is not required to do the extern al surface HFEC inspection in areas where a repair covers the affected 
inspection zone if the repair meets the conditions that follow: 
1. The repair is the corrective action to the outboar d lower wing skin crack condition identified in Service 
Bulletin AP737-57-022 and installed after the Original Issue date of Service Bulletin AP737-57-022 AND 
2. The installed repair was approved by a FAA DE R for the Split Scimitar Winglet provisioned configuration 
via a FAA Form 8110-3.

### Page 58

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 55 of 162 
Aviation Partners Boeing Proprietary 
Group 4 
Table 7: Inspection of the Outboard Lower Wing Skin Left Wing at Stringers S-9 and S-10 
Condition Action Method of 
Compliance 
Refer to the listed 
procedures in AP737-57-
022 original issue or later 
approved revisions as an 
accepted procedure 
All Airplanes. Do an external general visual inspection 
of the outboard lower wing skin at the two 
most outboard fasteners at S-9 and S-10, 
left wing, for any repair. 
- Do PART 1: OPEN 
ACCESS - LEFT WING. 
FIGURE 1 - 
CONDITION 13: 
ANY REPAIR 
FOUND. 
CONDITION 13 (ACTION 1): 
Contact Aviation Partners Boeing for 
alternative inspection(s) and corrective 
action instruction(s) and do the alternative 
inspection(s) and applicable on-condition 
corrective action(s). 
- - 
CONDITION 13 (ACTION 2): 
Do an external surface High Frequency 
Eddy Current (HFEC) inspection of the 
outboard lower wing skin at the two most 
outboard fasteners at S-9 and S-10, left 
wing, for any crack at the unrepaired 
areas. 
FIGURE 3 and 
FIGURE 4 
- 
CONDITION 13.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower wing skin 
at the two most outboard fasteners at S-9 
and S-10, left wing, for any crack. (a) 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
FIGURE 3 and 
FIGURE 4 
- 
CONDITION 13.2: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing for 
repair instructions and do the repair. 
- - 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
CONDITION 14: 
NO REPAIR 
FOUND. 
Do an external surface HFEC inspection 
of the outboard lower wing skin at the two 
most outboard fasteners at S-9 and S-10, 
left wing, for any crack. 
FIGURE 3 and 
FIGURE 4 
- 
CONDITION 14.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower wing skin 
at the two most outboard fasteners at S-9 
and S-10, left wing, for any crack. (a) 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
FIGURE 3 and 
FIGURE 4 
-

### Page 59

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 56 of 162 
Aviation Partners Boeing Proprietary 
Group 4 
Table 7: Inspection of the Outboard Lower Wing Skin Left Wing at Stringers S-9 and S-10 
Condition Action Method of 
Compliance 
Refer to the listed 
procedures in AP737-57-
022 original issue or later 
approved revisions as an 
accepted procedure 
CONDITION 14.2: 
ANY CRACK 
FOUND. 
CONDITION 14.2 (ACTION 1): 
Contact Aviation Partners Boeing for 
repair instructions and do the repair. 
- - 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
CONDITION 14.2 (ACTION 2): 
Repeat the external surface HFEC 
inspection of the outboard lower wing skin 
at the two most outboard fasteners at S-9 
and S-10, left wing, for any crack. (a) 
- Do PART 3: CLOSE 
ACCESS - LEFT WING. 
FIGURE 3 and 
FIGURE 4 
- 
(a) It is not required to do the exte rnal surface HFEC inspection in areas where a repair covers the affected 
inspection zone if the repair meets the conditions that follow: 
1. The repair is the corrective action to the outboar d lower wing skin crack condition identified in Service 
Bulletin AP737-57-022 and installed after the Original Issue date of Service Bulletin AP737-57-022 AND 
2. The installed repair was approved by a FA A DER for the Blended Winglet provisioned configuration via a 
FAA Form 8110-3.

### Page 60

AVIATION PARTNERS BOEING SERVICE BULLETIN AP737-57-022 
 
Original Issue: Apr 17, 2025 AP737-57-022 
Revision 2: Aug 27, 2025 Page 57 of 162 
Aviation Partners Boeing Proprietary 
Group 4 
Table 8: Inspection of the Outboard Lower Wing Skin Right Wing at Stringers S-9 and S-10 
Condition Action Method of 
Compliance 
Refer to the listed 
procedures in AP737-57-
022 original issue or later 
approved revisions as an 
accepted procedure 
All Airplanes. Do an external general visual inspection 
of the outboard lower wing skin at the two 
most outboard fasteners at S-9 and S-10, 
right wing, for any repair. 
- Do PART 2: OPEN 
ACCESS - RIGHT WING. 
FIGURE 2 - 
CONDITION 15: 
ANY REPAIR 
FOUND. 
CONDITION 15 (ACTION 1): 
Contact Aviation Partners Boeing for 
alternative inspection(s) and corrective 
action instruction(s) and do the alternative 
inspection(s) and applicable on-condition 
corrective action(s). 
- - 
CONDITION 15 (ACTION 2): 
Do an external surface High Frequency 
Eddy Current (HFEC) inspection of the 
outboard lower wing skin at the two most 
outboard fasteners at S-9 and S-10, right 
wing, for any crack at the unrepaired 
areas. 
FIGURE 5 and 
FIGURE 6 
- 
CONDITION 15.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower wing skin 
at the two most outboard fasteners at S-9 
and S-10, right wing, for any crack. (a) 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
FIGURE 5 and 
FIGURE 6 
- 
CONDITION 15.2: 
ANY CRACK 
FOUND. 
Contact Aviation Partners Boeing for 
repair instructions and do the repair. 
- - 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
CONDITION 16: 
NO REPAIR 
FOUND. 
Do an external surface HFEC inspection 
of the outboard lower wing skin at the two 
most outboard fasteners at S-9 and S-10, 
right wing, for any crack. 
FIGURE 5 and 
FIGURE 6 
- 
CONDITION 16.1: 
NO CRACK 
FOUND. 
Repeat the external surface HFEC 
inspection of the outboard lower wing skin 
at the two most outboard fasteners at S-9 
and S-10, right wing, for any crack. (a) 
- Do PART 4: CLOSE 
ACCESS - RIGHT WING. 
FIGURE 5 and 
FIGURE 6 
-

The text continues at https://openairdocs.org/service-documents/aviation-partners-boeing/ap737-57-022/file/77ca46374f67.md?from=61

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
