# Aviation Partners Boeing Alert Service Bulletin AP757-53-001

## Copies (2)

Copies the FAA filed in AD dockets on regulations.gov, newest revision first. A newer revision may exist.

- Revision 2 ("AP757-53-001_Rev2_10-22-2019"), 43 pages: PDF https://openairdocs.org/files/sha256/09/37/0937109e00233aee4770dab2db413e5d6d6e0122794ae8aa0b605cf157001edf; text https://openairdocs.org/service-documents/aviation-partners-boeing/ap757-53-001/file/0937109e0023.md. Rights: © Aviation Partners Boeing. Filed by the FAA in regulations.gov docket FAA-2020-0094; AD 2020-20-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Revision 1 ("FAA-2017-0711_AP757-53-001 (1) FUSELAGE - Section 46 - Body Station 1640 Fuselage Frame Inspection"), 35 pages: PDF https://openairdocs.org/files/sha256/a5/5e/a55e4e1471043f389b1a05cda60bdf08f61bb9366ce16b2f002bce244f9c12d4; text https://openairdocs.org/service-documents/aviation-partners-boeing/ap757-53-001/file/a55e4e147104.md. Rights: © Aviation Partners Boeing. Filed by the FAA in regulations.gov docket FAA-2017-0711; AD 2018-06-07 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Aviation Partners Boeing](https://openairdocs.org/service-documents/aviation-partners-boeing.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: AP757-53-001
- Latest revision known: AP757-53-001, Revision 2, dated October 22, 2019 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/aviation-partners-boeing/ap757-53-001

## ADs that cite it (3) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2022-15-09](https://openairdocs.org/ad/2022-15-09.md), effective Aug 17, 2022: No revision named
- [AD 2020-20-10](https://openairdocs.org/ad/2020-20-10.md), effective Nov 10, 2020: Revisions 1 and 2
- [AD 2018-06-07](https://openairdocs.org/ad/2018-06-07.md), effective May 3, 2018: Revision 1

Also cited in [2 proposed ADs](https://openairdocs.org/service-documents/aviation-partners-boeing/ap757-53-001/proposed.md).

## Text (43 pages)

Revision 2, the newest copy. Rights: © Aviation Partners Boeing. Filed by the FAA in regulations.gov docket FAA-2020-0094; AD 2020-20-10 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

AVIATION PARTNERS BOEING SERVICE BULLETIN 
2811 S 102nd Street, Suite 200 
Seattle, WA 98168 
(206) 830-7699 
 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page i  
Aviation Partners Boeing Proprietary 
 ALERT      NUMBER: AP757-53-001 Revision Transmittal Sheet 
Original Issue: May 22, 2017  
Revision 2 October 22, 2019  
ATA SYSTEM: 5360   
SUBJECT: FUSELAGE – Section 46 – Body Station 1640 Fuselage Frame Inspection 
This revision includes all pages of the service bulletin. 
COMPLIANCE INFORMATION RELATED TO THIS REVISION 
Federal Aviation Administration (FAA) Airworthiness Directive AD 2018-06-07 is related to this service bulletin. 
Effects of this Revision on airplanes on which Revision 1 was previously done: 
NOTE:  PART instructions correspond to the instructions contained in Boeing Service Bulletin 757 -53A0108, 
Revision 1, or later. 
Group Condition Action 
Groups 1, 3 Airplanes that have accomplished OPTION 1 PART 2 
inspections in Service Bulletin AP757-53-001 Revision 1 
Issue with no crack found. 
Do PART 6 inspection for any 
crack, nick or gouge. 
Do PART 2, PART 7 and PART 8 
inspection for any crack. 
Airplanes that have accomplished OPTION 2 PART 3 
inspections in Service Bulletin AP757-53-001 Revision 1 
Issue with no crack found. 
Do PART 6 inspection for any 
crack, nick or gouge. 
Do PART 3, PART 7 and PART 8 
inspection for any crack. 
Airplanes that have accomplished the inspections in 
accordance with Service Bulletin AP757-53-001 Revision 
1 Issue and have installed a repair or local frame 
replacement that does not contain a reinforcement repair 
or repair splice member between S-11 and S-16 and the 
repair or replacement is Boeing Organization Designation 
Authorization (ODA) approved via an FAA form 8100-9. 
Do PART 6 inspection for any 
crack, nick or gouge. 
Do PART 2, PART 7 and PART 8 
inspection for any crack. 
OR 
Do PART 3, PART 7 and PART 8 
inspection for any crack. 
Airplanes that have accomplished the inspections in 
accordance with Service Bulletin AP757-53-001 Revision 
1 Issue and have installed a repair or local frame 
replacement that contains a reinforcement repair or repair 
splice member between S-11 and S-16. 
Contact The Boeing Company for 
alternative inspection(s) and do the 
inspection(s) and any corrective 
actions as applicable. 
Airplanes that have accomplished the inspections in 
accordance with Service Bulletin AP757-53-001 Revision 
1 Issue and have installed a repair or local frame 
replacement that is not Boeing Organization Designation 
Authorization (ODA) approved. 
Contact The Boeing Company for 
alternative inspection(s) and do the 
inspection(s) and any corrective 
actions as applicable.

### Page 2

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page ii 
Aviation Partners Boeing Proprietary 
REASON FOR REVISION 
This revision contains planned administrative changes coordinated with the FAA.  
This revision is sent to provide the following: 
 Added a reference to Airworthiness Directive AD 2018-06-07 
 Added new instructions to do a one-time inspection of maintenance records for any repairs or local frame 
replacements installed as a result of damage found during inspections in Revision 1 of service bulletin AP757-
53-001. 
 Added a one-time Detailed Inspection of the frame inner chord forward return flange edge for cracks, nicks and 
gouges. 
 Added initial and repetitive High Frequency Eddy Current (HFEC) inspections around the fasteners of the frame 
inner chord, and of the inner chord forward return flange radius. 
 Changed Low Frequency Eddy Current (LFEC) inspections for six fasteners in the inner chord from LFEC to 
HFEC inspections, and the inspection direction is changed from the outboard side of the frame inner chord to 
the inboard side of the frame inner chord. 
 Added LFEC inspections of the frame inner chord around the uppermost fastener common to the frame inner 
chord long strap (Groups 1 and 3) 
These sections were changed: 
1. Summary, added new detailed and HFEC inspections.  Reference to stringers S -11 and S -16, was S -11 
and S-14. 
2. In Paragraph 1.A., Added Group 1 Configuration 3, Added Group 3 Configuration 3 . Revised group 
description. 
3. In Paragraph 1.B., Revised Boeing Service Bulletin revision callout, is Revision 1, was Original Issue.  
4. In Paragraph 1.C., Reason, updated paragraph to add new crack information and reason for revision 
statement added. 
5. In Paragraph 1.D., Description, added details on HFEC/LFEC inspections. Added table for effects of 
revision on airplanes on which revision 1 was previously done.  
6. In Paragraph 1.E., Compliance, changed existing compliance Tables  and added new compliance Tables 
to r eflect revised repeat intervals. A dded Part - Title Index table, and added paragraph to reference 
Airworthiness Directive (AD). 
7. In Paragraph 1.F., Revised approval statement, and added new AMOC statement. 
8. In Paragraph 1.G., Manpower, revised manpower for figures 1-4. Added manpower for figures 13-18. 
9. In Paragraph 1.J., References, Added Airworthiness Directive AD 2018 -06-07, Boeing Service Related 
Problem 757-SRP-53-0594, and Multi-Operator Message MOM-MOM-17-0037-01C. 
10. In Paragraph 3.A., General Information, revised reference to Boeing Service Bulletin revision. 
11. In Paragraph 3.B., Work Instructions, revised reference to Boeing Service Bulletin revision . Added Group 
1 Configuration 3, Added Group 3 Configuration 3.  
(Reference ECR-0001974) 
REVISION HISTORY 
Original Issue: May 22, 2017 
Revision 1: June 21, 2017 
Revision 2: October 22, 2019

### Page 3

AVIATION PARTNERS BOEING SERVICE BULLETIN 
2811 S 102nd Street, Suite 200 
Seattle, WA 98168 
(206) 830-7699 
 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 1 of 41  
Aviation Partners Boeing Proprietary 
 ALERT      NUMBER: AP757-53-001  
Original Issue: May 22, 2017  
Revision 2 October 22, 2019  
ATA SYSTEM: 5360   
SUBJECT: FUSELAGE – Section 46 – Body Station 1640 Fuselage Frame Inspection 
 
PROPRIETARY NOTICE 
 
The data contained hereon and herein is proprietary to Aviation Partners Boeing. Neither this data nor the data 
contained herein shall be  reproduced, used or disclosed to others without the written authorization of Aviation 
Partners Boeing. 
 
EXPORT CONTROLLED TECHNOLOGY 
 
This document contains information about a technology controlled by the Export Administration Regulations (EAR) 
(15 CFR 730-774). It has been classified under Export Control Classification Number (ECCN) 9E991 and may not 
be exported to certain countries without a license. Providing this information to a foreign national – inside or outside 
the United States – can constitute a prohibited export. Each person handling this document has a legal responsibility 
to comply with all applicable EAR requirements and should consult with an Export Control Officer before providing 
it to any foreign national.

### Page 4

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 2 of 41  
Aviation Partners Boeing Proprietary 
APB DOCUMENT FEEDBACK FORM 
To provide feedback on this document to APB for corrections or improvements, please complete the form below 
and fax or email to the attention of APB Liaison Engineering at: 
Fax: +1 (206) 767-0535 
Email: leng@aviationpartners.com 
Airline Name: ______________________________________________ 
Contact Name: ______________________________________________ 
Phone Number: ______________________________________________ 
Email Address: ______________________________________________ 
Airplane Model-Type: ______________________________________________ 
Document Number: ______________________________________________ 
Document Revision: ______________________________________________ 
Document Title: ______________________________________________ 
Chapter-Section-
Subject: ______________________________________________ 
Page: ______________________________________________ 
Page Date: ______________________________________________ 
Description of Change: 
(Include additional 
sheets as required) 
 
 
 
 
 
 
 
 
 
 
 
 
 
Attachments: ______________________________________________

### Page 5

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 3 of 41  
Aviation Partners Boeing Proprietary 
Table of Contents 
Revision Transmittal Sheet .......................................................................................................................................... i 
APB DOCUMENT FEEDBACK FORM .......................................................................................................................2 
Table of Contents .......................................................................................................................................................3 
Summary  ....................................................................................................................................................................4 
1. PLANNING INFORMATION .......................................................................................................................7 
A. Effectivity ....................................................................................................................................................7 
1. Airplanes .....................................................................................................................................................7 
2. Spares Affected ..........................................................................................................................................8 
B. Concurrent Requirements...........................................................................................................................8 
C. Reason........................................................................................................................................................8 
D. Description ..................................................................................................................................................9 
E. Compliance .............................................................................................................................................. 10 
F. Approval ................................................................................................................................................... 37 
G. Manpower ................................................................................................................................................ 37 
H. Weight and Balance Changes ................................................................................................................. 38 
I. Electrical Load Data ................................................................................................................................. 38 
J. References .............................................................................................................................................. 38 
1. Existing Data: ........................................................................................................................................... 38 
2. Data Supplied with this Service Bulletin: ................................................................................................. 38 
3. Installation Drawings Used in the Preparation of this Service Bulletin: ................................................... 38 
K. Publications Affected ................................................................................................................................38  
1. Publications ..............................................................................................................................................38  
2. Damage Tolerance Based Structural Inspections: .................................................................................. 39 
L. Interchangeability and Intermixability of Parts ......................................................................................... 39 
M. Software Accomplishment Summary ....................................................................................................... 39 
2. MATERIAL INFORMATION..................................................................................................................... 40 
A. Material - Price and Availability ............................................................................................................... 40 
B. Industry Support Information ................................................................................................................... 40 
C. Parts Necessary for Each Airplane .......................................................................................................... 40 
1. Kits/Parts ................................................................................................................................................. 40 
2. Parts and Materials Supplied by the Operator: ....................................................................................... 40 
3. Parts Modified and Re-identified ............................................................................................................. 40 
4. Parts Removed and Not Replaced .......................................................................................................... 40 
D. Parts Necessary to Change Spares ........................................................................................................ 40 
E. Special Tooling – Price Availability .......................................................................................................... 40 
F. Special Tooling Necessary to do this Service Bulletin ............................................................................ 40 
3. ACCOMPLISHMENT INSTRUCTIONS ................................................................................................... 41 
A. GENERAL INFORMATION ..................................................................................................................... 41 
B. WORK INSTRUCTIONS .......................................................................................................................... 41

### Page 6

AVIATION PARTNERS BOEING SERVICE BULLETIN 
2811 S 102nd Street, Suite 200 
Seattle, WA 98168 
(206) 830-7699 
 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 4 of 41  
Aviation Partners Boeing Proprietary 
 ALERT      NUMBER: AP757-53-001 Summary 
Original Issue: May 22, 2017  
Revision 2 October 22, 2019  
ATA SYSTEM: 5360   
SUBJECT: FUSELAGE – Section 46 – Body Station 1640 Fuselage Frame Inspection 
 
THIS DOCUMENT IS SENT TO THE OPERATORS OF RECORD OF THE AIRPLANES SHOWN IN 
PARAGRAPH 1.A., EFFECTIVITY. IF AN AIRPLANE HAS BEEN LEASED OR SOLD, SEND THIS DOCUMENT 
TO THE NEW OPERATOR. IF APPLICABLE SPARES HAVE BEEN SOLD, SEND THIS DOCUMENT TO THE 
NEW OWNER. 
CONCURRENT REQUIREMENTS 
Company Service Bulletin Description 
The Boeing Company 757-53A0108, Revision 1, 
or later approved 
revisions published on 
myboeingfleet. 
Get access to the Body Station (STA) 1640 
fuselage frame, between stringers S-11 and S-16, 
on the left and right side of the airplane. Do High 
Frequency Eddy Current (HFEC) and Low 
Frequency Eddy Current (LFEC) inspections for 
any crack in the STA 1640 fuselage frame, 
between stringers S-11 and S-16, on the left and 
right side of the airplane. 
 
BACKGROUND 
This service bulletin is sent to provide instructions to do High Frequency Eddy Current (HFEC) and Low Frequency 
Eddy Current (LFEC) inspections for any crack in the fuselage frame at Body Station (STA) 1640, between stringers 
S-11 and S-16, on the left and right side of the airplane. If the work given in this service bulletin is not done, such 
fatigue cracking could adversely affect the structural integrity of the airplane.  
One operator reported a crack finding, at 24,607 total fli ght cycles, in the STA 1640 fuselage frame at stringer S -
14R, adjacent to door stop number 5. The crack had fully severed the inner chord and web of the STA 1640 fuselage 
frame. The cracking is attributed to fatigue caused by flight loads and pressurizatio n of the fuselage. 
During inspections in Service Bulletin 757-53A0108 Original Issue an operator found a STA 1640 frame with a crack 
starting from the third fastener below the S -14 intercostal on the right side. The crack was approximately  3 inches 
long and had grown into an insulation stud hole in the web near the outer chord. The crack was not in  the 757-
53A0108 Original Issue inspection area. There have also been instances of cracks found growing out of the fastener 
holes in the inner chord in the aft direction, towards the web away from the original inspection areas.

### Page 7

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 5 of 41 
Aviation Partners Boeing Proprietary 
In addition, after the original issue of this service bulletin, there have been a total of 23 cracks reported in the  STA 
1640 frames resulting from SB 757 -53A0108 Original Issue inspections.  These reports were from airplanes  with 
20,500 to 39,850 flight cycles, and with 62,100 to 89,150 flight hours. The crack lengths reported ranged from 0.10 
inch to a completely severed frame with some reporting cracking in the outer chord.  
Boeing has determined that the existing inspection programs are not sufficient to detect these cracks because most 
of the STA 1640 fuselage frame is obscured by adjacent structure. Accomplishment of this service bulletin, together 
with Boeing Service Bulletin 757-53A0108, will improve detection of cracking in the STA 1640 fuselage frame and 
make sure that any crack is found and repaired before the crack grows to a critical length.  
Boeing Fleet Team Digest (FTD) 757 FTD 53-16001 is related to this service bulletin. 
Boeing Service Related Problem (SRP) 757-SRP-53-0525 and 757-SRP-53-0594 are related to this service 
bulletin. 
Multi-Operator Message (MOM) MOM-MOM-17-0037-01C is related to this service bulletin. 
This table is provided to operators for planning purposes only. Refer to the applicable sections for more 
information. 
Planning Data Affected Reference 
Spares Affected No Paragraph 1.A.2., Spares Affected 
AD Related Yes Paragraph 1.E., Compliance and Paragraph 
1.F., Approval 
Weight and Balance Change No Paragraph 1.H., Weight and Balance 
Changes 
Electrical Load Changed No Paragraph 1.I., Electrical Load Data 
Publications Affected No Paragraph 1.K., Publications Affected 
Airplane Flight Operations Affected (Flight 
Crew Operations Manual and/or FAA 
Approved Airplane Flight Manual) 
No Paragraph 1.K., Publications Affected 
Kits/Parts Required No Paragraph 2.C.1., Kits/Parts 
Operator Supplied Parts/Material No Paragraph 2.C.2., Parts and Materials 
Supplied by the Operator 
Special Tooling Required No Paragraph 2.F., Special Tooling Necessary 
to do this Service Bulletin 
 
ACTION 
Get access to the Body Station (STA) 1640 fuselage frame, between stringers S -11 and S-16, on the left and right 
side of the airplane. Do the one time general visual inspection for repairs and the one-time detailed inspection for 
any crack, nick or gouge in the STA 1640 fuselage frame, on the left and right side of the airplane. If any  repair, 
crack, nick or gouge is found, contact The Boeing Company for alternate inspections, repair s and any corrective 
actions as applicable. If no crack, nick or gouge is found, do the High Frequency Eddy Current (HFEC) inspections 
and Low Frequency Eddy Current (LFEC) for any crack in the STA 1640 fuselage frame, between  stringers S-11 
and S-16, on the left and right side of the airplane. If any crack is found, contact The Boeing  Company for repair 
instructions and do the repair, and repeat the HFEC and LFEC inspections in unrepaired  areas at the times given 
in Paragraph 1.E., Compliance. If no crack is found, repeat the HFEC and LFEC  inspections at the times given in 
Paragraph 1.E., Compliance.

### Page 8

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 6 of 41 
Aviation Partners Boeing Proprietary 
EFFECTIVITY 
All 757-200 and 757-300 Airplane(s) with STC ST01518SE installed APB Blended Winglets or Scimitar Blended 
Winglets. Refer to Paragraph 1.A.1., Airplanes, for the list of affected airplane(s). 
COMPLIANCE 
Federal Aviation Administration (FAA) Airworthiness Directive AD 2018-06-07 is related to this service bulletin. 
The effective date of AD 2018-06-07 is May 03, 2018. 
Refer to Paragraph 1.E., Compliance. 
INDUSTRY SUPPORT INFORMATION 
Boeing warranty remedies are not available for the inspections given in this service bulletin.  
MANPOWER 
Refer to Paragraph 1.G., Manpower. 
MATERIAL INFORMATION 
None.

### Page 9

AVIATION PARTNERS BOEING SERVICE BULLETIN 
2811 S 102nd Street, Suite 200 
Seattle, WA 98168 
(206) 830-7699 
 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 7 of 41  
Aviation Partners Boeing Proprietary 
 ALERT      NUMBER: AP757-53-001  
Original Issue: May 22, 2017  
Revision 2 October 22, 2019  
ATA SYSTEM: 5360   
SUBJECT: FUSELAGE – Section 46 – Body Station 1640 Fuselage Frame Inspection 
 
1. PLANNING INFORMATION 
A. Effectivity 
1. Airplanes 
This service bulletin is applicable to 757-200 with Blended Winglets or Scimitar Blended Winglets, 
and 757-300 with Blended Winglets (Refer to STC ST01518SE). The following airplane group, 
configuration, and description are the same as Boeing service bulletin 757-53A0108. 
GROUP CONFIGURATION DESCRIPTION 
1 - 757-200 airplanes with APB Blended Winglets or Scimitar 
Blended Winglets, that have a long inner chord strap at the 
Body Station (STA) 1640 fuselage frame. 
1 757-200 airplanes with less than 32,000 total flight cycles at 
the revision 1 issue date of this service bulletin, that have not 
accomplished AP757-53-001 R1 inspections as of the revision 
2 date of this service bulletin. 
2 757-200 airplanes with 32,000 total flight cycles or more at the 
revision 1 issue date of this service bulletin, that have not 
accomplished AP757-53-001 R1 inspections as of the revision 
2 date of this service bulletin. 
3 757-200 airplanes that have accomplished AP757-53-001 
revision 1 as of the revision 2 date of this service bulletin. 
3 - 757-300 airplanes with APB Blended Winglets, that have a 
long inner chord strap at the Body Station (STA) 1640 
fuselage frame. 
1 757-300 airplanes, with less than 16,000 total flight cycles at 
the revision 1 issue date of this service bulletin, that have not 
accomplished AP757-53-001 R1 inspections as of the revision 
2 date of this service bulletin. 
2 757-300 airplanes, with 16,000 total flight cycles or more at 
the revision 1 issue date of this service bulletin, that have not

### Page 10

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 8 of 41 
Aviation Partners Boeing Proprietary 
GROUP CONFIGURATION DESCRIPTION 
accomplished AP757-53-001 R1 inspections as of the revision 
2 date of this service bulletin. 
3 757-300 airplanes that have accomplished AP757-53-001 
revision 1 as of the revision 2 date of this service bulletin. 
2. Spares Affected 
None 
B. Concurrent Requirements 
The service bulletin listed below must be done at the same time as this service bulletin:  
Company Service Bulletin Description 
The Boeing Company 757-53A0108, Revision 1, 
or later approved 
revisions published on 
myboeingfleet. 
Get access to the Body Station (STA) 1640 
fuselage frame, between stringers S-11 and S-16, 
on the left and right side of the airplane. Do High 
Frequency Eddy Current (HFEC) and Low 
Frequency Eddy Current (LFEC) inspections for 
any crack in the STA 1640 fuselage frame, 
between stringers S-11 and S-16, on the left and 
right side of the airplane. 
 
C. Reason 
This service bulletin is sent to provide instructions to do High Frequency Eddy Current (HFEC) and Low 
Frequency Eddy Current (LFEC) inspections for any crack in the fuselage frame at Body Station (STA) 
1640, between stringers S -11 and S-16, on the left and right side of the airplane. If the work given in this 
service bulletin is not done, such fatigue cracking could adversely affect the structural integrity of the 
airplane. 
One operator reported a crack finding, at 24,607 total flight cycles, in the STA 1640 fuselage frame at  
stringer S-14R, adjacent to door stop number 5. The crack had fully severed the inner chord and web of 
the STA 1640 fuselage frame. The cracking is attributed to fatigue caused by flight loads and pressurization 
of the fuselage. 
During inspections in Service Bulletin 757-53A0108 Original Issue an operator found the STA 1640  frame 
with a crack starting from the third fastener below the S -14 intercostal on the right side. The  crack was 
approximately 3 inches long and had grown into an insulation stud hole in  the web near the  outer chord. 
The crack was not in the 757 -53A0108 Original Issue inspection area. There have also  been instances of 
cracks found growing out of the fastener holes in the inner chord in the aft direction, towards the web away 
from the original inspection areas. 
Boeing has determined that the existing inspection programs are not sufficient to detect these cracks 
because most of the STA 1640 fuselage frame is obscured by adjacent structure. Accomplishment of this 
service bulletin, together wi th Boeing Service Bulletin 757 -53A0108, will improve detection of cracking in 
the STA 1640 fuselage frame and make sure that any crack is found and repaired before the crack grows 
to a critical length. 
Boeing Fleet Team Digest (FTD) 757 FTD 53-16001 is related to this service bulletin. 
Boeing Service Related Problem (SRP) 757-SRP-53-0525 is related to this service bulletin. 
Multi-Operator Message (MOM) MOM-MOM-17-0037-01C is related to this service bulletin.

### Page 11

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 9 of 41 
Aviation Partners Boeing Proprietary 
Revision 2 is sent to provide the following: 
– Added a reference to Airworthiness Directive AD 2018-06-07 
– Added new instructions to do a one time inspection of maintenance records for any repairs or local  
frame replacements installed as a result of damage found during inspections in the original issue  of 
service bulletin 757-53A0108. 
– Added a one time Detailed Inspection of the frame inner chord forward return flange edge for  cracks, 
nicks and gouges. 
– Added initial and repetitive High Frequency Eddy Current (HFEC) inspections around the fasteners  of 
the frame inner chord, and of the inner chord forward return flange radius. 
– Changed Low Frequency Eddy Current (LFEC) inspections for six fasteners in the inner chord  from 
LFEC to HFEC inspections, and the inspection direction is changed from the outboard side  of the 
frame inner chord to the inboard side of the frame inner chord. 
– Added LFEC inspections of the frame inner chord around the uppermost fastener common to the  
frame inner chord long strap (Groups 1-3) 
D. Description 
Get access to the Body Station (STA) 1640 fuselage frame, between stringers S -11 and S-16, on the left 
and right side of the airplane. Do the one time general visual inspection for repairs and the one-time detailed 
inspection for any crack, nick or gouge in the STA 1640 fuselage frame, on the left  and right side of the 
airplane. If any repair, crack, nick or gouge is found, contact The Boeing Company for alternate inspections, 
repairs and any corrective actions as applicable. If no crack, nick or gouge is found, do the High Frequency 
Eddy Current (HFEC) inspections and Low Frequency Eddy Current (LFEC) for any crack in the STA 1640 
fuselage frame, between stringers S -11 and S-16, on the left and right side of the airplane. If any crack is 
found, contact The Boeing Company for repair instructions  and do the repair, and repeat the HFEC and 
LFEC inspections in unrepaired areas at the times given  in Paragraph 1.E., Compliance. If no crack is 
found, repeat the HFEC and LFEC inspections at the times given in Paragraph 1.E., Compliance. 
Effects of this Revision on airplanes on which Revision 1 was previously done: 
NOTE:  PART instructions correspond to the instructions contained in Boeing Service Bulletin 757-
53A0108, Revision 1, or later. 
Group Condition Action 
Groups 1, 3 Airplanes that have accomplished OPTION 1 
PART 2 inspections in Service Bulletin AP757-53-
001 Revision 1 Issue with no crack found. 
Do PART 6 inspection for any 
crack, nick or gouge. 
Do PART 2, PART 7 and PART 8 
inspection for any crack. 
Airplanes that have accomplished OPTION 2 
PART 3 inspections in Service Bulletin AP757-53-
001 Revision 1 Issue with no crack found. 
Do PART 6 inspection for any 
crack, nick or gouge. 
Do PART 3, PART 7 and PART 8 
inspection for any crack. 
Airplanes that have accomplished the inspections 
in accordance with Service Bulletin AP757-53-001 
Revision 1 Issue and have installed a repair or 
local frame replacement that does not contain a 
reinforcement repair or repair splice member 
between S-11 and S-16 and the repair or 
replacement is Boeing Organization Designation 
Authorization (ODA) approved via an FAA form 
8100-9. 
Do PART 6 inspection for any 
crack, nick or gouge. 
Do PART 2, PART 7 and PART 8 
inspection for any crack. 
OR 
Do PART 3, PART 7 and PART 8 
inspection for any crack.

### Page 12

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 10 of 41 
Aviation Partners Boeing Proprietary 
Group Condition Action 
Airplanes that have accomplished the inspections 
in accordance with Service Bulletin AP757-53-001 
Revision 1 Issue and have installed a repair or 
local frame replacement that contains a 
reinforcement repair or repair splice member 
between S-11 and S-16. 
Contact The Boeing Company for 
alternative inspection(s) and do 
the inspection(s) and any 
corrective actions as applicable 
Airplanes that have accomplished the inspections 
in accordance with Service Bulletin AP757-53-001 
Revision 1 Issue and have installed a repair or 
local frame replacement that is not Boeing 
Organization Designation Authorization (ODA) 
approved. 
Contact The Boeing Company for 
alternative inspection(s) and do 
the inspection(s) and any 
corrective actions as applicable 
 
The work in this service bulletin is done in the maintenance zone(s) given below. 
Group 1: 
Affected Maintenance Zones 
Model Zone 
757-200 with APB Blended 
Winglets or Scimitar Blended 
Winglets 
251, 252 
Group 3: 
Affected Maintenance Zones 
Model Zone 
757-300 with APB Blended 
Winglets 
251, 252 
E. Compliance 
Federal Aviation Administration (FAA) Airworthiness Directive AD 2018-06-07 is related to this service 
bulletin. The effective date of AD 2018-06-07 is May 03, 2018. 
Do the required actions in accordance with Paragraph 3. Accomplishment Instructions. 
Logic diagrams showing compliance tasks and compliance times are included as an aid in APPENDIX A, 
APPENDIX B, APPENDIX E, and APPENDIX F of Boeing Service Bulletin 757-53A0108. Compliance 
tasks, compliance times, and repeat intervals are given in this service bulletin.  
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When 
more than one ACTION is given for a CONDITION number or an OPTION number, do all of the ACTION 
numbers for that CONDITION number or OPTION number. 
CONDITION refers to the STA 1640 frame CONDITION of either or both Left Side and/or Right Side 
frames. Both side frames must be in compliance but may be under different CONDITIONS at the same 
time on any given airplane.

### Page 13

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 11 of 41 
Aviation Partners Boeing Proprietary 
Table 1: Part – Title Index 
NOTE:  PART instructions correspond to the instructions contained in Boeing Service Bulletin 757 -
53A0108, Revision 1, or later. 
PART Description 
PART 2 BODY STATION (STA) 1640 FUSELAGE FRAME AT S-14 AND 
INTERCOSTAL AREAS - HIGH FREQUENCY EDDY CURRENT (HFEC) 
AND LOW FREQUENCY EDDY CURRENT (LFEC) INSPECTIONS 
PART 3 BODY STATION (STA) 1640 FUSELAGE FRAME AT S-14 AND 
INTERCOSTAL AREAS - HIGH FREQUENCY EDDY CURRENT (HFEC) 
INSPECTIONS 
PART 4 BODY STATION (STA) 1640 FUSELAGE FRAME AT S-11, S-13 AND 
INTERCOSTAL AREAS - HIGH FREQUENCY EDDY CURRENT (HFEC) 
INSPECTION 
PART 6 BODY STATION (STA) 1640 FUSELAGE FRAME INNER CHORD RETURN 
FLANGE - DETAILED INSPECTION 
PART 7 BODY STATION (STA) 1640 FUSELAGE FRAME INNER CHORD BELOW 
S-14 - HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION 
PART 8 BODY STATION (STA) 1640 FUSELAGE FRAME INNER CHORD 
ADJACENT TO S-14 - HIGH FREQUENCY EDDY CURRENT (HFEC) 
INSPECTION 
 
Group 1, Configuration 1-2: 
Table 2: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for 
any crack and Detailed Inspection for any crack, nick or gouge in the Body Station (STA) 1640 fuselage 
side frames, between Stringers S-11 and S-16, left and right side 
Condition Action Compliance Time 
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
Airplanes with less 
than 32,000 Total 
Flight Cycles (TFC) 
at the revision 1 date 
of this service 
bulletin. 
ACTION 1: 
Do a General Visual 
Inspection for any existing 
repairs in the Body Station 
(STA) 1640 fuselage frame 
between stringer S-11 and S-
16. 
Before 20,000 
TFC. 
Within 2,400 
Flight Cycles 
(FC) after the 
revision 1 issue 
date of this 
service bulletin 
or before 32,500 
TFC, whichever 
occurs first. 
- 
ACTION 2: 
Do PART 6 for any crack, 
nick or gouge. 
Before 20,000 
TFC. 
Within 1,600 FC 
after the revision 
2 date of this 
service bulletin 
- 
Airplanes with 32,000 
TFC or more at the 
revision 1 date of this 
service bulletin. 
ACTION 1: 
Do a General Visual 
Inspection for any existing 
repairs in the Body Station 
(STA) 1640 fuselage frame 
between stringer S-11 and S-
16. 
Within 500 FC after the revision 1 
date of this service bulletin - 
ACTION 2: 
Do PART 6 for any crack, 
nick or gouge. 
Within 1,600 FC after the revision 
2 date of this service bulletin -

### Page 14

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 12 of 41 
Aviation Partners Boeing Proprietary 
Group 1, Configuration 1-2: 
Table 2: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for 
any crack and Detailed Inspection for any crack, nick or gouge in the Body Station (STA) 1640 fuselage 
side frames, between Stringers S-11 and S-16, left and right side 
Condition Action Compliance Time 
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 1: 
ANY EXISTING 
REPAIR FOUND 
OR 
ANY CRACK, NICK 
OR GOUGE 
FOUND 
OPTION 1 (ACTION 1): 
Contact The Boeing Company 
for alternative inspections to 
this service bulletin or repairs 
and do the inspections, repairs 
and any corrective actions as 
applicable. 
Before further flight - 
OPTION 1 (ACTION 2): 
Do PART 2 at the unrepaired 
areas for any crack. 
Before further flight  
OPTION 1 (ACTION 3): 
Do PART 4 at the unrepaired 
areas for any crack. 
Before further flight  
OPTION 1 (ACTION 4): 
Do PART 8 at the unrepaired 
areas for any crack. 
Before further flight  
OPTION 1 (ACTION 5): 
Do PART 7 at the unrepaired 
areas for any crack. 
Before 20,000 
TFC 
Within 1,600 
FC after the 
revision 2 date 
of this service 
bulletin 
 
OPTION 2 (ACTION 1): 
Contact The Boeing Company 
for alternative inspections to 
this service bulletin or repairs 
and do the inspections, repairs 
and any corrective actions as 
applicable. 
Before further flight  
OPTION 2 (ACTION 2): 
Do PART 3 at the unrepaired 
areas for any crack. 
Before further flight  
OPTION 2 (ACTION 3): 
Do PART 4 at the unrepaired 
areas for any crack. 
Before further flight  
OPTION 2 (ACTION 4): 
Do PART 8 at the unrepaired 
areas for any crack. 
Before further flight  
OPTION 2 (ACTION 5): 
Do PART 7 at the unrepaired 
areas for any crack. 
Before 20,000 
TFC 
Within 1,600 
FC after the 
revision 2 date 
of this service 
bulletin

### Page 15

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 13 of 41 
Aviation Partners Boeing Proprietary 
Group 1, Configuration 1-2: 
Table 2: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for 
any crack and Detailed Inspection for any crack, nick or gouge in the Body Station (STA) 1640 fuselage 
side frames, between Stringers S-11 and S-16, left and right side 
Condition Action Compliance Time 
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 2: 
NO EXISTING 
REPAIR FOUND 
AND NO CRACK, 
NICK OR GOUGE 
FOUND 
 
OPTION 1 (ACTION 1): 
Do PART 2 for any crack. 
Before further flight. - 
OPTION 1 (ACTION 2): 
Do PART 4 for any crack. 
Before further flight. - 
OPTION 1 (ACTION 3): 
Do PART 8 for any crack. 
Before further flight. - 
OPTION 1 (ACTION 4): 
Do PART 7 for any crack. 
Before 20,000 
TFC. 
Within 1,600 FC 
after the 
revision 2 date 
of this service 
bulletin 
- 
OPTION 2 (ACTION 1): 
Do PART 3 for any crack. 
Before further flight. - 
OPTION 2 (ACTION 2): 
Do PART 4 for any crack. 
Before further flight. - 
OPTION 2 (ACTION 3): 
Do PART 8 for any crack. 
Before further flight. - 
OPTION 2 (ACTION 4): 
Do PART 7 for any crack. 
Before 20,000 
TFC. 
Within 1,600 FC 
after the 
revision 2 date 
of this service 
bulletin 
-

### Page 16

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 14 of 41 
Aviation Partners Boeing Proprietary 
Group 1, Configuration 1-2: 
Table 2: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for 
any crack and Detailed Inspection for any crack, nick or gouge in the Body Station (STA) 1640 fuselage 
side frames, between Stringers S-11 and S-16, left and right side 
Condition Action Compliance Time 
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 3: 
ANY CRACK FOUND 
OPTION 1 (ACTION 1): 
Contact The Boeing 
Company for repair 
instructions and do the repair. 
Before further flight.  
OPTION 1 (ACTION 2): 
Repeat PART 2 for any crack. 
(a)(b) 
- 4,900 FC 
OPTION 1 (ACTION 3): 
Repeat PART 7 for any crack. 
(a) 
- 4,900 FC 
OPTION 1 (ACTION 4): 
Repeat PART 8 for any crack. 
(a) 
- 4,900 FC 
OPTION 1 (ACTION 5): 
Repeat PART 4 for any crack. 
(a) 
- 8,600 FC 
OPTION 2 (ACTION 1): 
Contact The Boeing 
Company for repair 
instructions and do the repair. 
Before further flight.  
OPTION 2 (ACTION 2): 
Repeat PART 3 for any crack. 
(a)(b) 
- 2,000 FC 
OPTION 2 (ACTION 3): 
Repeat PART 7 for any crack. 
(a) 
- 2,000 FC 
OPTION 2 (ACTION 4): 
Repeat PART 8 for any crack. 
(a) 
- 2,000 FC 
OPTION 2 (ACTION 5): 
Repeat PART 4 for any crack. 
(a) 
- 8,600 FC

### Page 17

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 15 of 41 
Aviation Partners Boeing Proprietary 
Group 1, Configuration 1-2: 
Table 2: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for 
any crack and Detailed Inspection for any crack, nick or gouge in the Body Station (STA) 1640 fuselage 
side frames, between Stringers S-11 and S-16, left and right side 
Condition Action Compliance Time 
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 4: 
NO CRACK FOUND 
OPTION 1 (ACTION 1): 
Repeat PART 2 for any crack. 
(a)(b) 
- 4,900 FC 
 OPTION 1 (ACTION 2): 
Repeat PART 7 for any crack. 
(a) 
- 4,900 FC 
 OPTION 1 (ACTION 3): 
Repeat PART 8 for any crack. 
(a) 
- 4,900 FC 
 OPTION 1 (ACTION 4): 
Repeat PART 4 for any crack. 
(a) 
- 8,600 FC 
 OPTION 2 (ACTION 1): 
Repeat PART 3 for any crack. 
(a)(b) 
- 2,000 FC 
 OPTION 2 (ACTION 2): 
Repeat PART 7 for any crack. 
(a) 
- 2,000 FC 
 OPTION 2 (ACTION 3): 
Repeat PART 8 for any crack. 
(a) 
- 2,000 FC 
 OPTION 2 (ACTION 4): 
Repeat PART 4 for any crack. 
(a) 
- 8,600 FC

### Page 18

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 16 of 41 
Aviation Partners Boeing Proprietary 
Group 1, Configuration 1-2: 
Table 2: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for 
any crack and Detailed Inspection for any crack, nick or gouge in the Body Station (STA) 1640 fuselage 
side frames, between Stringers S-11 and S-16, left and right side 
Condition Action Compliance Time 
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 5: 
STA 1640 frames with a 
local frame replacement 
that does not include a 
reinforcement repair or 
repair splice member 
between S-11 and S-16 
and the local frame 
replacement is Boeing 
ODA approved via FAA 
form 8100-9. 
OPTION 1 (ACTION 1): 
Do PART 2 for any crack. 
Within 16,000 FC after the 
installation of the local frame 
replacement. 
- 
OPTION 1 (ACTION 2): 
Do PART 4 for any crack. 
(a) 
Within 16,000 FC after the 
installation of the local frame 
replacement. 
- 
OPTION 1 (ACTION 3): 
Do PART 7 for any crack. 
Within 16,000 FC after the 
installation of the local frame 
replacement. 
- 
OPTION 1 (ACTION 4): 
Do PART 8 for any crack. 
Within 16,000 FC after the 
installation of the local frame 
replacement. 
 
OPTION 2 (ACTION 1): 
Do PART 3 for any crack. 
Within 16,000 FC after the 
installation of the local frame 
replacement. 
 
OPTION 2 (ACTION 2): 
Do PART 4 for any crack. 
(a) 
Within 16,000 FC after the 
installation of the local frame 
replacement. 
 
OPTION 2 (ACTION 3): 
Do PART 7 for any crack. 
Within 16,000 FC after the 
installation of the local frame 
replacement. 
 
OPTION 2 (ACTION 4): 
Do PART 8 for any crack. 
Within 16,000 FC after the 
installation of the local frame 
replacement. 
 
(a) It is not required to do the inspections in areas where a repair covers the affected inspection zone provided 
all of the following conditions are met: 
(1) The repair is the corrective action to the crack condition identified in this service bulletin and installed 
after the revision 1 issue date of this service bulletin AND 
(2) The installed repair was approved by the Boeing ODA via a FAA Form 8100 -9. 
(b) It is acceptable to change the repeat inspection option from OPTION 1 (PART 2) to OPTION 2 (PART 3),  or 
from OPTION 2 (PART 3) to OPTION 1 (PART 2), provided the repeat interval for the most recently 
accomplished inspection option is complied with.

### Page 19

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 17 of 41 
Aviation Partners Boeing Proprietary 
Group 1, Configuration 3: 
Table 3: Inspection of Maintenance Records, Detailed Inspection for any crack, nick or gouge, High 
Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for any  crack and 
in the Body Station (STA) 1640 fuselage side frames, between Stringers S -11 and S-16, left and right side 
Condition Action Compliance Time 
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
All airplanes Do an inspection of STA 
1640 frame maintenance 
records for the most recent 
inspection OPTION used 
and for any reinforcement 
repairs or local frame 
replacements installed. 
Within 500 Flight Cycles (FC) after 
the revision 2 date of this service 
bulletin. 
- 
CONDITION 1: 
STA 1640 frames with a 
local frame replacement 
that does not include a 
reinforcement repair or 
repair splice member 
between S-11 and S-16 
as a result of inspections 
done in accordance with 
revision 1 of this service 
bulletin and the local 
frame replacement is 
Boeing ODA approved 
via FAA form 8100-9. 
Do PART 6 for any crack, 
nick or gouge.  
Within 16,000 
FC after the 
installation of 
the local frame 
replacement. 
Within 1,600 FC 
after the 
revision 2 date 
of this service 
bulletin. 
- 
CONDITION 2: 
STA 1640 frames that 
have installed a local 
frame replacement that 
includes a reinforcement 
repair or repair splice 
member between S-11 
and S-16 and the repair 
or local frame 
replacement is Boeing 
ODA approved via FAA 
for 8100-9. 
Contact The Boeing 
Company for alternative 
inspection(s) and do the 
inspection(s) and any 
applicable on-condition 
actions at the times 
specified by The Boeing 
Company. 
Within 500 Flight Cycles (FC) after 
the revision 2 date of this service 
bulletin. 
 
CONDITION 3: 
STA 1640 frames that 
have installed a frame 
repair or local frame 
replacement that is not 
Boeing Organization 
designation 
authorization (ODA) 
Approved via FAA from 
8100-9 
Contact The Boeing 
Company for alternative 
inspection(s) and do the 
inspection(s) and any 
applicable on-condition 
actions at the times 
specified by The Boeing 
Company. 
Within 500 Flight Cycles (FC) after 
the revision 2 date of this service 
bulletin. 
-

### Page 20

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 18 of 41 
Aviation Partners Boeing Proprietary 
Group 1, Configuration 3: 
Table 3: Inspection of Maintenance Records, Detailed Inspection for any crack, nick or gouge, High 
Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for any crack and 
in the Body Station (STA) 1640 fuselage side frames, between Stringe rs S-11 and S-16, left and right side 
Condition Action Compliance Time 
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 4: 
STA 1640 frames with no 
crack found during the most 
recent inspections that 
were done using OPTION 1 
in accordance with Service 
Bulletin AP757-53-001 
Revision 1. 
Do PART 6 for any crack, 
nick or gouge. (a) 
Within 2,900 
FC after the 
previous 
OPTION 1 
PART 2 
inspection 
Within 500 FC 
after the 
revision 2 date 
of this service 
bulletin. 
- 
CONDITION 5: 
STA 1640 frames with no 
crack found during the most 
recent inspections that 
were done using OPTION 2 
in accordance with Service 
Bulletin AP757-53-001 
Revision 1. 
Do PART 6 for any crack, 
nick or gouge. (a) 
Within 2,050 
FC after the 
previous 
OPTION 2 
PART 3 
inspection 
Within 500 FC 
after the 
revision 2 date 
of this service 
bulletin. 
-

### Page 21

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 19 of 41 
Aviation Partners Boeing Proprietary 
Group 1, Configuration 3: 
Table 3: Inspection of Maintenance Records, Detailed Inspection for any crack, nick or gouge, High 
Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for any crac k and 
in the Body Station (STA) 1640 fuselage side frames, between Stringers S -11 and S-16, left and right side 
Condition Action Compliance Time 
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 6: 
ANY CRACK, NICK 
OR GOUGE FOUND 
 
OPTION 1 (ACTION 1): 
Contact The Boeing Company 
for repair instructions and do 
the repair. 
Before further flight. - 
OPTION 1 (ACTION 2): 
Do PART 2 for any crack. (a) 
Before further flight.  
OPTION 1 (ACTION 3): 
Do PART 7 for any crack. (a) 
Before further flight.  
OPTION 1 (ACTION 4): 
Do PART 8 for any crack. (a) 
Before further flight.  
OPTION 1 (ACTION 5): 
Do PART 4 for any crack. (a) 
Within 8,600 FC after the previous 
PART 4 inspection. 
 
OPTION 2 (ACTION 1): 
Contact The Boeing Company 
for repair instructions and do 
the repair. 
Before further flight. - 
OPTION 2 (ACTION 2): 
Do PART 3 for any crack. (a) 
Before further flight.  
OPTION 2 (ACTION 3): 
Do PART 7 for any crack. (a) 
Before further flight.  
OPTION 2 (ACTION 4): 
Do PART 8 for any crack. (a) 
Before further flight.  
OPTION 2 (ACTION 5): 
Do PART 4 for any crack. (a) 
Within 8,600 FC after the previous 
PART 4 inspection.

### Page 22

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 20 of 41 
Aviation Partners Boeing Proprietary 
Group 1, Configuration 3: 
Table 3: Inspection of Maintenance Records, Detailed Inspection for any crack, nick or gouge, High 
Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for any crack and 
in the Body Station (STA) 1640 fuselage side frames, between Stringers S -11 and S-16, left and right side 
Condition Action Compliance Time  
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 7: 
NO CRACK, NICK 
OR GOUGE FOUND 
OPTION 1 (ACTION 1): 
Do PART 2 for any crack. (a) 
Before further flight.  
OPTION 1 (ACTION 2): 
Do PART 7 for any crack. (a) 
Before further flight.  
OPTION 1 (ACTION 3): 
Do PART 8 for any crack. (a) 
Before further flight.  
OPTION 1 (ACTION 4): 
Do PART 4 for any crack. (a) 
Within 8,600 FC after the previous 
PART 4 inspection. 
 
OPTION 2 (ACTION 1): 
Do PART 3 for any crack. (a) 
Before further flight.  
OPTION 2 (ACTION 2): 
Do PART 7 for any crack. (a) 
Before further flight.  
OPTION 2 (ACTION 3): 
Do PART 8 for any crack. (a) 
Before further flight.  
OPTION 2 (ACTION 4): 
Do PART 4 for any crack. (a) 
Within 8,600 FC after the previous 
PART 4 inspection.

### Page 23

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 21 of 41 
Aviation Partners Boeing Proprietary 
Group 1, Configuration 3: 
Table 3: Inspection of Maintenance Records, Detailed Inspection for any crack, nick or gouge, High 
Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for any crack and 
in the Body Station (STA) 1640 fuselage side frames, between Stringers S -11 and S-16, left and right side 
Condition Action Compliance Time  
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 8: 
ANY CRACK FOUND 
OPTION 1 (ACTION 1): 
Contact The Boeing 
Company for repair 
instructions and do the repair. 
Before further flight.  
OPTION 1 (ACTION 2): 
Repeat PART 2 for any crack. 
(a)(b) 
- 4,900 FC 
OPTION 1 (ACTION 3): 
Repeat PART 7 for any crack. 
(a) 
- 4,900 FC 
OPTION 1 (ACTION 4): 
Repeat PART 8 for any crack. 
(a) 
- 4,900 FC 
OPTION 1 (ACTION 5): 
Repeat PART 4 for any crack. 
(a) 
- 8,600 FC 
OPTION 2 (ACTION 1): 
Contact The Boeing 
Company for repair 
instructions and do the repair. 
Before further flight.  
OPTION 2 (ACTION 2): 
Repeat PART 3 for any crack. 
(a)(b) 
- 2,000 FC 
OPTION 2 (ACTION 3): 
Repeat PART 7 for any crack. 
(a) 
- 2,000 FC 
OPTION 2 (ACTION 4): 
Repeat PART 8 for any crack. 
(a) 
- 2,000 FC 
OPTION 2 (ACTION 5): 
Repeat PART 4 for any crack. 
(a) 
- 8,600 FC

### Page 24

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 22 of 41 
Aviation Partners Boeing Proprietary 
Group 1, Configuration 3: 
Table 3: Inspection of Maintenance Records, Detailed Inspection for any crack, nick or gouge, High 
Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for any crack and 
in the Body Station (STA) 1640 fuselage side frames, between Stringers S-11 and S-16, left and right side 
Condition Action Compliance Time  
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 9: 
NO CRACK FOUND 
OPTION 1 (ACTION 1): 
Repeat PART 2 for any crack. 
(a)(b) 
- 4,900 FC 
 OPTION 1 (ACTION 2): 
Repeat PART 7 for any crack. 
(a) 
- 4,900 FC 
 OPTION 1 (ACTION 3): 
Repeat PART 8 for any crack. 
(a) 
- 4,900 FC 
 OPTION 1 (ACTION 4): 
Repeat PART 4 for any crack. 
(a) 
- 8,600 FC 
 OPTION 2 (ACTION 1): 
Repeat PART 3 for any crack. 
(a)(b) 
- 2,000 FC 
 OPTION 2 (ACTION 2): 
Repeat PART 7 for any crack. 
(a) 
- 2,000 FC 
 OPTION 2 (ACTION 3): 
Repeat PART 8 for any crack. 
(a) 
- 2,000 FC 
 OPTION 2 (ACTION 4): 
Repeat PART 4 for any crack. 
(a) 
- 8,600 FC

### Page 25

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 23 of 41 
Aviation Partners Boeing Proprietary 
Group 1, Configuration 3: 
Table 3: Inspection of Maintenance Records, Detailed Inspection for any crack, nick or gouge, High 
Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for any crack and 
in the Body Station (STA) 1640 fuselage side frames, between Stringers S -11 and S-16, left and right side 
Condition Action Compliance Time 
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 10: 
STA 1640 frames with a 
local frame replacement 
that does not include a 
reinforcement repair or 
repair splice member 
between S-11 and S-16 
installed as a result of 
STA 1640 frame 
inspections done in 
accordance with revision 
2 of this service bulletin 
and the local frame 
replacement is Boeing 
ODA approved via FAA 
form 8100-9. 
OPTION 1 (ACTION 1): 
Do PART 2 for any crack. 
Within 16,000 FC after the 
installation of the local frame 
replacement. 
- 
OPTION 1 (ACTION 2): 
Do PART 4 for any crack. 
(a) 
Within 16,000 FC after the 
installation of the local frame 
replacement. 
- 
OPTION 1 (ACTION 3): 
Do PART 7 for any crack. 
Within 16,000 FC after the 
installation of the local frame 
replacement. 
- 
OPTION 1 (ACTION 4): 
Do PART 8 for any crack. 
Within 16,000 FC after the 
installation of the local frame 
replacement. 
 
OPTION 2 (ACTION 1): 
Do PART 3 for any crack. 
Within 16,000 FC after the 
installation of the local frame 
replacement. 
 
OPTION 2 (ACTION 2): 
Do PART 4 for any crack. 
(a) 
Within 16,000 FC after the 
installation of the local frame 
replacement. 
 
OPTION 2 (ACTION 3): 
Do PART 7 for any crack. 
Within 16,000 FC after the 
installation of the local frame 
replacement. 
 
OPTION 2 (ACTION 4): 
Do PART 8 for any crack. 
Within 16,000 FC after the 
installation of the local frame 
replacement. 
 
(a) It is not required to do the inspections in areas where a repair covers the affected inspection zone provided 
all of the following conditions are met: 
(1) The repair is the corrective action to the crack condition identified in this service bulletin and installed 
after the revision 1 issue date of this service bulletin AND 
(2) The installed repair was approved by the Boeing ODA via a FAA Form 8100-9. 
(b) It is acceptable to change the repeat inspection option from OPTION 1 (PART 2) to OPTION 2 (PART 3), or 
from OPTION 2 (PART 3) to OPTION 1 (PART 2), provided the repeat interval for the most recently 
accomplished inspection option is complied with.

### Page 26

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 24 of 41 
Aviation Partners Boeing Proprietary 
Group 3, Configuration 1-2: 
Table 6: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for 
any crack and Detailed Inspection for any crack, nick or gouge in the Body Station (STA) 1640 fuselage 
side frames, between Stringers S-11 and S-16, left and right side 
Condition Action Compliance Time 
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
Airplanes with less than 
16,000 Total Flight 
Cycles (TFC) at the 
revision 1 issue date of 
this service bulletin. 
ACTION 1: 
Do a General Visual 
Inspection for any existing 
repairs in the Body Station 
(STA) 1640 fuselage frame 
between stringer S-11 and S-
16. 
Before 10,000 
TFC. 
Within 1,250 
Flight Cycles 
(FC) after the 
revision 1 issue 
date of this 
service bulletin 
or before 
16,500 TFC, 
whichever 
occurs first. 
- 
ACTION 2: 
Do PART 6 for any crack, 
nick or gouge. 
Before 10,000 
TFC. 
Within 1,600 
FC after the 
revision 2 date 
of this service 
bulletin. 
- 
Airplanes with 16,000 
TFC or more at the 
revision 1 issue date of 
this service bulletin. 
ACTION 1: 
Do a General Visual 
Inspection for any existing 
repairs in the STA 1640 
fuselage frame between 
stringer S-11 and S-16. 
Within 500 FC after the revision 1 
issue date of this service bulletin. 
- 
ACTION 2: 
Do PART 6 for any crack, 
nick or gouge. 
Within 1,600 FC after the revision 
2 date of this service bulletin. 
-

### Page 27

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 25 of 41 
Aviation Partners Boeing Proprietary 
Group 3, Configuration 1-2: 
Table 6: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for 
any crack and Detailed Inspection for any crack, nick or gouge in the Body Station (STA) 1640 fuselage 
side frames, between Stringers S-11 and S-16, left and right side 
Condition Action Compliance Time 
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 1: 
ANY EXISTING REPAIR 
FOUND 
OR 
ANY CRACK, NICK OR 
GOUGE FOUND 
 
OPTION 1 (ACTION 1): 
Contact The Boeing Company 
for alternative inspections to 
this service bulletin or repairs 
and do the inspections, 
repairs and any corrective 
actions as applicable. 
Before further flight. - 
OPTION 1 (ACTION 2): 
Do PART 2 at the unrepaired 
areas for any crack. 
Before further flight. - 
OPTION 1 (ACTION 3): 
Do PART 4 at the unrepaired 
areas for any crack. 
Before further flight. - 
OPTION 1 (ACTION 4): 
Do PART 8 at the unrepaired 
areas for any crack. 
Before further flight. - 
OPTION 1 (ACTION 5): 
Do PART 7 at the unrepaired 
areas for any crack. 
Before 10,000 
TFC. 
Within 1,600 
FC after the 
revision 2 date 
of this service 
bulletin. 
- 
OPTION 2 (ACTION 1): 
Contact The Boeing Company 
for alternative inspections to 
this service bulletin or repairs 
and do the inspections, 
repairs and any corrective 
actions as applicable. 
Before further flight. - 
OPTION 2 (ACTION 2): 
Do PART 3 at the unrepaired 
areas for any crack. 
Before further flight. - 
OPTION 2 (ACTION 3): 
Do PART 4 at the unrepaired 
areas for any crack. 
Before further flight. - 
OPTION 2 (ACTION 4): 
Do PART 8 at the unrepaired 
areas for any crack. 
Before further flight. - 
OPTION 2 (ACTION 5): 
Do PART 7 at the unrepaired 
areas for any crack. 
Before 10,000 
TFC. 
Within 1,600 
FC after the 
revision 2 date 
of this service 
bulletin. 
-

### Page 28

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 26 of 41 
Aviation Partners Boeing Proprietary 
Group 3, Configuration 1-2: 
Table 6: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for 
any crack and Detailed Inspection for any crack, nick or gouge in the Body Station (STA) 1640 fuselage 
side frames, between Stringers S-11 and S-16, left and right side 
Condition Action Compliance Time 
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 2: 
NO EXISTING 
REPAIR FOUND 
AND NO CRACK, 
NICK OR GOUGE 
FOUND 
 
OPTION 1 (ACTION 1): 
Do PART 2 for any crack. 
Before further flight. - 
OPTION 1 (ACTION 2): 
Do PART 4 for any crack. 
Before further flight. - 
OPTION 1 (ACTION 3): 
Do PART 8 for any crack. 
Before further flight. - 
OPTION 1 (ACTION 4): 
Do PART 7 for any crack. 
Before 10,000 
TFC. 
Within 1,600 FC 
after the 
revision 2 date 
of this service 
bulletin. 
- 
OPTION 2 (ACTION 1): 
Do PART 3 for any crack. 
Before further flight. - 
OPTION 2 (ACTION 2): 
Do PART 4 for any crack. 
Before further flight. - 
OPTION 2 (ACTION 3): 
Do PART 8 for any crack. 
Before further flight. - 
OPTION 2 (ACTION 4): 
Do PART 7 for any crack. 
Before 10,000 
TFC. 
Within 1,600 FC 
after the 
revision 2 date 
of this service 
bulletin. 
-

### Page 29

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 27 of 41 
Aviation Partners Boeing Proprietary 
Group 3, Configuration 1-2: 
Table 6: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for 
any crack and Detailed Inspection for any crack, nick or gouge in the Body Station (STA) 1640 fuselage 
side frames, between Stringers S-11 and S-16, left and right side 
Condition Action Compliance Time 
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 3: 
ANY CRACK FOUND 
OPTION 1 (ACTION 1): 
Contact The Boeing 
Company for repair 
instructions and do the 
repair. 
Before further flight. - 
OPTION 1 (ACTION 2): 
Repeat PART 2 for any 
crack. (a)(b) 
 2,600 FC 
OPTION 1 (ACTION 3): 
Repeat PART 7 for any 
crack. (a) 
 2,600 FC 
OPTION 1 (ACTION 4): 
Repeat PART 8 for any 
crack. (a) 
 2,600 FC 
OPTION 1 (ACTION 5): 
Repeat PART 4 for any 
crack. (a) 
 4,300 FC 
OPTION 2 (ACTION 1): 
Contact The Boeing 
Company for repair 
instructions and do the 
repair. 
Before further flight.  
OPTION 2 (ACTION 2): 
Repeat PART 3 for any 
crack. (a)(b) 
 1,900 FC 
OPTION 2 (ACTION 3): 
Repeat PART 7 for any 
crack. (a) 
 1,900 FC 
OPTION 2 (ACTION 4): 
Repeat PART 8 for any 
crack. (a) 
 1,900 FC 
OPTION 2 (ACTION 5): 
Repeat PART 4 for any 
crack. (a) 
 4,300 FC

### Page 30

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 28 of 41 
Aviation Partners Boeing Proprietary 
Group 3, Configuration 1-2: 
Table 6: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for 
any crack and Detailed Inspection for any crack, nick or gouge in the Body Station (STA) 1640 fuselage 
side frames, between Stringers S-11 and S-16, left and right side 
Condition Action Compliance Time 
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 4: 
NO CRACK FOUND 
OPTION 1 (ACTION 1): 
Repeat PART 2 for any 
crack. (a)(b) 
 2,600 FC 
OPTION 1 (ACTION 2): 
Repeat PART 7 for any 
crack. (a) 
 2,600 FC 
OPTION 1 (ACTION 3): 
Repeat PART 8 for any 
crack. (a) 
 2,600 FC 
OPTION 1 (ACTION 4): 
Repeat PART 4 for any 
crack. (a) 
 4,300 FC 
OPTION 2 (ACTION 1): 
Repeat PART 3 for any 
crack. (a)(b) 
 1,900 FC 
OPTION 2 (ACTION 2): 
Repeat PART 7 for any 
crack. (a) 
 1,900 FC 
OPTION 2 (ACTION 3): 
Repeat PART 8 for any 
crack. (a) 
 1,900 FC 
OPTION 2 (ACTION 4): 
Repeat PART 4 for any 
crack. (a) 
 4,300 FC

### Page 31

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 29 of 41 
Aviation Partners Boeing Proprietary 
Group 3, Configuration 1-2: 
Table 6: High Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for 
any crack and Detailed Inspection for any crack, nick or gouge in the Body Station (STA) 1640 fuselage 
side frames, between Stringers S-11 and S-16, left and right side 
Condition Action Compliance Time 
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 5: 
STA 1640 frames with a 
local frame replacement 
that does not include a 
reinforcement repair or 
repair splice member 
between S-11 and S-16 
and the local frame 
replacement is Boeing ODA 
approved via FAA form 
8100-9. 
 
OPTION 1 (ACTION 1): 
Do PART 2 for any crack. 
Within 5,200 FC after the 
installation of the local frame 
replacement. 
- 
OPTION 1 (ACTION 2): 
Do PART 4 for any crack. 
(a) 
Within 5,200 FC after the 
installation of the local frame 
replacement. 
- 
OPTION 1 (ACTION 3): 
Do PART 7 for any crack. 
Within 5,200 FC after the 
installation of the local frame 
replacement. 
- 
OPTION 1 (ACTION 4): 
Do PART 8 for any crack. 
Within 5,200 FC after the 
installation of the local frame 
replacement. 
- 
OPTION 2 (ACTION 1): 
Do PART 3 for any crack. 
Within 5,200 FC after the 
installation of the local frame 
replacement. 
- 
OPTION 2 (ACTION 2): 
Do PART 4 for any crack. 
(a) 
Within 5,200 FC after the 
installation of the local frame 
replacement. 
- 
OPTION 2 (ACTION 3): 
Do PART 7 for any crack. 
Within 5,200 FC after the 
installation of the local frame 
replacement. 
- 
OPTION 2 (ACTION 4): 
Do PART 8 for any crack. 
Within 5,200 FC after the 
installation of the local frame 
replacement. 
- 
(a) It is not required to do the inspections in areas where a repair covers the affected inspection zone provided  
all of the following conditions are met: 
(1) The repair is the corrective action to the crack condition identified in this service bulletin and installed 
after the revision 1 issue date of this service bulletin AND 
(2) The installed repair was approved by the Boeing ODA via a FAA Form 8100 -9. 
(b) It is acceptable to change the repeat inspection option from OPTION 1 (PART 2) to OPTION 2 (PART 3), or 
from OPTION 2 (PART 3) to OPTION 1 (PART 2), provided the repeat interval for the most recently 
accomplished inspection option is complied with.

### Page 32

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 30 of 41 
Aviation Partners Boeing Proprietary 
Group 3, Configuration 3: 
Table 7: Inspection of Maintenance Records. Detailed Inspection for any crack, nick or gouge. High 
Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for any crack and 
in the Body Station (STA) 1640 fuselage side frames, between Stringe rs S-11 and S-16, left and right side 
Condition Action Compliance Time 
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
All airplanes Do an inspection of STA 
1640 frame maintenance 
records for the most recent 
inspection OPTION used 
and for any reinforcement 
repairs or local frame 
replacements installed. 
Within 500 Flight Cycles (FC) 
after the revision 2 date of this 
service bulletin. 
- 
CONDITION 1: 
STA 1640 frames with a 
local frame replacement 
that does not include a 
reinforcement repair or 
repair splice member 
between S-11 and S-16 
as a result of inspections 
done in accordance with 
revision 1 of this service 
bulletin and the local 
frame replacement is 
Boeing ODA approved 
via FAA form 8100-9. 
Do PART 6 for any crack, 
nick or gouge. 
Within 5,200 
FC after the 
installation of 
the local frame 
replacement. 
Within 1,600 
FC after the 
revision 2 date 
of this service 
bulletin. 
- 
CONDITION 2: 
STA 1640 frames that 
have installed a local 
frame replacement that 
includes a reinforcement 
repair or repair splice 
member between S-11 
and S-16 and the repair 
or local frame 
replacement is Boeing 
ODA approved via FAA 
form 8100-9. 
Contact The Boeing 
Company for alternative 
inspection(s) and do the 
inspections and any 
applicable on-condition 
actions at the times 
specified by The Boeing 
Company. 
Within 500 FC after the revision 2 
issue date of this service bulletin. 
- 
CONDITION 3: 
STA 1640 that have 
installed a frame repair or 
local frame replacement 
that is not Boeing 
Organization Designation 
Authorization (ODA) 
approved via FAA form 
8100-9. 
Contact The Boeing 
Company for alternative 
inspection(s) and do the 
inspections and any 
applicable on-condition 
actions at the times 
specified by The Boeing 
Company. 
Within 500 FC after the revision 2 
issue date of this service bulletin. 
-

### Page 33

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 31 of 41 
Aviation Partners Boeing Proprietary 
Group 3, Configuration 3: 
Table 7: Inspection of Maintenance Records. Detailed Inspection for any crack, nick or gouge. High 
Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for any crack and 
in the Body Station (STA) 1640 fuselage side frames, between Stringers S -11 and S-16, left and right side 
Condition Action Compliance Time 
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 4: 
STA 1640 frames with no 
crack found during the 
most recent inspections 
that were done using 
OPTION 1 in accordance 
with Service Bulletin 
AP757-53-001 Revision 1 
Issue. 
Do PART 6 for any crack, 
nick or gouge. (a) 
Within 2,300 
FC after the 
previous 
OPTION 1 
PART 2 
inspection 
Within 500 FC 
after the 
revision 2 date 
of this service 
bulletin. 
- 
CONDITION 5: 
STA 1640 frames with no 
crack found during the 
most recent inspections 
that were done using 
OPTION 2 in accordance 
with Service Bulletin 
AP757-53-001 Revision 1 
Issue. 
Do PART 6 for any crack, 
nick or gouge. (a) 
Within 1,800 
FC after the 
previous 
OPTION 2 
PART 3 
inspection 
Within 500 FC 
after the 
revision 2 date 
of this service 
bulletin. 
-

### Page 34

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 32 of 41 
Aviation Partners Boeing Proprietary 
Group 3, Configuration 3: 
Table 7: Inspection of Maintenance Records. Detailed Inspection for any crack, nick or gouge. High 
Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for any crack and 
in the Body Station (STA) 1640 fuselage side frames, between Stringers S-11 and S-16, left and right side 
Condition Action Compliance Time  
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 6: 
ANY CRACK, NICK 
OR GOUGE FOUND 
OPTION 1 (ACTION 1): 
Contact The Boeing 
Company for repair 
instructions and do the repair. 
Before further flight. - 
OPTION 1 (ACTION 2): 
Repeat PART 2 for any crack. 
(a) 
Before further flight. - 
OPTION 1 (ACTION 3): 
Repeat PART 7 for any crack. 
(a) 
Before further flight. - 
OPTION 1 (ACTION 4): 
Repeat PART 8 for any crack. 
(a) 
Before further flight. - 
OPTION 1 (ACTION 5): 
Repeat PART 4 for any crack. 
(a) 
Within 4,400 FC after the previous 
PART 4 inspection. - 
OPTION 2 (ACTION 1): 
Contact The Boeing 
Company for repair 
instructions and do the repair. 
Before further flight. - 
OPTION 2 (ACTION 2): 
Repeat PART 3 for any crack. 
(a) 
Before further flight. - 
OPTION 2 (ACTION 3): 
Repeat PART 7 for any crack. 
(a) 
Before further flight. - 
OPTION 2 (ACTION 4): 
Repeat PART 8 for any crack. 
(a) 
Before further flight. - 
OPTION 2 (ACTION 5): 
Repeat PART 4 for any crack. 
(a) 
Within 4,400 FC after the previous 
PART 4 inspection. -

### Page 35

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 33 of 41 
Aviation Partners Boeing Proprietary 
Group 3, Configuration 3: 
Table 7: Inspection of Maintenance Records. Detailed Inspection for any crack, nick or gouge. High 
Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for any crack and 
in the Body Station (STA) 1640 fuselage side frames, between Stringers S -11 and S-16, left and right side 
Condition Action Compliance Time  
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 7: 
NO CRACK, NICK 
OR GOUGE FOUND 
OPTION 1 (ACTION 1): 
Do PART 2 for any crack. (a) 
Before further flight. - 
OPTION 1 (ACTION 2): 
Do PART 7 for any crack. (a) 
Before further flight. - 
OPTION 1 (ACTION 3): 
Do PART 8 for any crack. (a) 
Before further flight. - 
OPTION 1 (ACTION 4): 
Do PART 4 for any crack. (a) 
Within 4,400 FC after the previous 
PART 4 inspection. - 
OPTION 2 (ACTION 1): 
Do PART 3 for any crack. (a) 
Before further flight. - 
OPTION 2 (ACTION 2): 
Do PART 7 for any crack. (a) 
Before further flight. - 
OPTION 2 (ACTION 3): 
Do PART 8 for any crack. (a) 
Before further flight. - 
OPTION 2 (ACTION 4): 
Do PART 4 for any crack. (a) 
Within 4,400 FC after the previous 
PART 4 inspection. -

### Page 36

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 34 of 41 
Aviation Partners Boeing Proprietary 
Group 3, Configuration 3: 
Table 7: Inspection of Maintenance Records. Detailed Inspection for any crack, nick or gouge. High 
Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for any crack and 
in the Body Station (STA) 1640 fuselage side frames, between Stringers S-11 and S-16, left and right side 
Condition Action Compliance Time 
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 8: 
ANY CRACK FOUND 
OPTION 1 (ACTION 1): 
Contact The Boeing 
Company for repair 
instructions and do the 
repair. 
Before further flight. - 
OPTION 1 (ACTION 2): 
Repeat PART 2 for any 
crack. (a)(b) 
 2,600 FC 
OPTION 1 (ACTION 3): 
Repeat PART 7 for any 
crack. (a) 
 2,600 FC 
OPTION 1 (ACTION 4): 
Repeat PART 8 for any 
crack. (a) 
 2,600 FC 
OPTION 1 (ACTION 5): 
Repeat PART 4 for any 
crack. (a) 
 4,300 FC 
OPTION 2 (ACTION 1): 
Contact The Boeing 
Company for repair 
instructions and do the 
repair. 
Before further flight.  
OPTION 2 (ACTION 2): 
Repeat PART 3 for any 
crack. (a)(b) 
 1,900 FC 
OPTION 2 (ACTION 3): 
Repeat PART 7 for any 
crack. (a) 
 1,900 FC 
OPTION 2 (ACTION 4): 
Repeat PART 8 for any 
crack. (a) 
 1,900 FC 
OPTION 2 (ACTION 5): 
Repeat PART 4 for any 
crack. (a) 
 4,300 FC

### Page 37

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 35 of 41 
Aviation Partners Boeing Proprietary 
Group 3, Configuration 3: 
Table 7: Inspection of Maintenance Records. Detailed Inspection for any crack, nick or gouge. High 
Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for any crack and 
in the Body Station (STA) 1640 fuselage side frames, between Stringers S -11 and S-16, left and right side 
Condition Action Compliance Time 
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 9: 
NO CRACK FOUND 
OPTION 1 (ACTION 1): 
Repeat PART 2 for any 
crack. (a)(b) 
 2,600 FC 
OPTION 1 (ACTION 2): 
Repeat PART 7 for any 
crack. (a) 
 2,600 FC 
OPTION 1 (ACTION 3): 
Repeat PART 8 for any 
crack. (a) 
 2,600 FC 
OPTION 1 (ACTION 4): 
Repeat PART 4 for any 
crack. (a) 
 4,300 FC 
OPTION 2 (ACTION 1): 
Repeat PART 3 for any 
crack. (a)(b) 
 1,900 FC 
OPTION 2 (ACTION 2): 
Repeat PART 7 for any 
crack. (a) 
 1,900 FC 
OPTION 2 (ACTION 3): 
Repeat PART 8 for any 
crack. (a) 
 1,900 FC 
OPTION 2 (ACTION 4): 
Repeat PART 4 for any 
crack. (a) 
 4,300 FC

### Page 38

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 36 of 41 
Aviation Partners Boeing Proprietary 
Group 3, Configuration 3: 
Table 7: Inspection of Maintenance Records. Detailed Inspection for any crack, nick or gouge. High 
Frequency Eddy Current (HFEC) and Low Frequency Eddy Current (LFEC) inspections for any crack and 
in the Body Station (STA) 1640 fuselage side frames, between Stringers S -11 and S-16, left and right side 
Condition Action Compliance Time 
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
CONDITION 10: 
STA 1640 frames with a 
local frame replacement 
that does not include a 
reinforcement repair or 
repair splice member 
between S-11 and S-16 
installed as a result of STA 
1640 frame inspections 
done in accordance with 
revision 2 of this service 
bulletin and the local frame 
replacement is Boeing ODA 
approved via FAA form 
8100-9. 
 
OPTION 1 (ACTION 1): 
Do PART 2 for any crack. 
Within 5,200 FC after the 
installation of the local frame 
replacement. 
- 
OPTION 1 (ACTION 2): 
Do PART 4 for any crack. 
(a) 
Within 5,200 FC after the 
installation of the local frame 
replacement. 
- 
OPTION 1 (ACTION 3): 
Do PART 7 for any crack. 
Within 5,200 FC after the 
installation of the local frame 
replacement. 
- 
OPTION 1 (ACTION 4): 
Do PART 8 for any crack. 
Within 5,200 FC after the 
installation of the local frame 
replacement. 
- 
OPTION 2 (ACTION 1): 
Do PART 3 for any crack. 
Within 5,200 FC after the 
installation of the local frame 
replacement. 
- 
OPTION 2 (ACTION 2): 
Do PART 4 for any crack. 
(a) 
Within 5,200 FC after the 
installation of the local frame 
replacement. 
- 
OPTION 2 (ACTION 3): 
Do PART 7 for any crack. 
Within 5,200 FC after the 
installation of the local frame 
replacement. 
- 
OPTION 2 (ACTION 4): 
Do PART 8 for any crack. 
Within 5,200 FC after the 
installation of the local frame 
replacement. 
- 
(a) It is not required to do the inspections in areas where a repair covers the affected inspection zone provided  
all of the following conditions are met: 
(1) The repair is the corrective action to the crack condition identified in this service bulletin and installed 
after the revision 1 issue date of this service bulletin AND 
(2) The installed repair was approved by the Boeing ODA via a FAA Form 8100-9. 
(b) It is acceptable to change the repeat inspection option from OPTION 1 (PART 2) to OPTION 2 (PART 3), or 
from OPTION 2 (PART 3) to OPTION 1 (PART 2), provided the repeat interval for the most recently 
accomplished inspection option is complied with.

### Page 39

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 37 of 41 
Aviation Partners Boeing Proprietary 
F. Approval 
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in this 
service bulletin comply with the applicable regulations and are FAA approved. This service bulletin and  its 
approval were based on the installation of APB STC ST01518SE. 
If an airplane has a non -Boeing modification, non -APB modification, or repair that affects a component or  
system also affected by this service bulletin, the operator is responsible for obtaining  appropriate regulatory 
agency approval before incorporating this service bulletin. 
In addition, the Manager of the FAA Los Angeles ACO Branch approves accomplishment of the inspections at 
the times specified in Compliance defined in Revision 2 of this service bulletin as an Alternative Method of 
Compliance (AMOC) to the requirements of paragraph (g) and (h) of AD 2018-06-07. All provisions of AD 2018-
06-07 that are not specifically referenced in the above statement remain fully applicable and must be complied 
with accordingly. 
In addition, t he Manager of the FAA Los Angeles ACO  Branch approves the actions (i.e. inspections) at the 
times specified in Compliance defined in Revision 2 of this service bulletin as an AMOC to the requirements of 
paragraph (h) of AD 2006-11-11 for the Stringer 14 and below inner chord and inner chord strap inspection of 
SSI 53-60-15 [No. 4 Passenger Door Cutout Forward Frame Inner Chord BS 1640 S -14 to S-17 L & R] listed 
in Section 9 of the Maintenance Planning Data (MPD) Document, D622N001-9. This AMOC only applies to the 
stringer 14 and below area structural inspections c ommon to the frame inner chord and inner chord strap at 
STA 1640 only. All provisions of AD 2006 -11-11 that are not specifically referenced in the above statement 
remain fully applicable and must be complied with. Therefore, operators may revise their FAA -approved 
maintenance or inspection program with these alternate inspections for common areas. 
G. Manpower 
The table below shows an estimate of the task hours necessary to do this inspection for each airplane. This 
estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator task hour 
data if necessary. The estimate does not include lost time. These are some examples of lost time:  
• Time to adjust to the workplace 
• Time to schedule the work 
• Time to inspect the work 
• Time to cure the materials 
• Time to make the parts 
• Time to find the tools. 
Group 1 and Group 3: 
Task Number of Persons Task Hours Elapsed Hours 
Open Access 2 17.00 8.50 
FIGURE 1 2 3.10 1.55 
FIGURE 2 2 3.10 1.55 
FIGURE 3 2 1.20 0.60 
FIGURE 4 2 1.20 0.60 
FIGURE 5 2 3.00 1.50 
FIGURE 6 2 3.00 1.50

### Page 40

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 38 of 41 
Aviation Partners Boeing Proprietary 
Task Number of Persons Task Hours Elapsed Hours 
FIGURE 13 2 0.20 0.10 
FIGURE 14 2 0.20 0.10 
FIGURE 15 2 1.30 0.65 
FIGURE 16 2 1.30 0.65 
FIGURE 17 2 1.00 0.50 
FIGURE 18 2 1.00 0.50 
Close Access 2 17.00 8.50 
TOTAL FOR EACH AIRPLANE 53.60 26.80 
 
H. Weight and Balance Changes 
None. 
I. Electrical Load Data 
Not changed 
J. References 
1. Existing Data: 
a. Boeing Service Letter 757-SL-51-022 
b. Boeing Service Related Problem (SRP) 757-SRP-53-0525, 757-SRP-53-0594 
c. Federal Aviation Administration (FAA) Airworthiness Directive (AD) 2006-11-11, 2018-06-07 
d. Boeing Service Bulletin 757-53A0108 
e. Boeing Service Bulletin Index D624N001 
f. Boeing Standard Overhaul Practice Manual (SOPM), 20-50-01 
g. Boeing 757 Aircraft Maintenance Manual (AMM) 25-21-05, 25-21-06, 25-25-01, 25-25-02, 25-31-
04, 25-41-04 
h. 757 Fleet Team Digest (FTD) 53-16001 
i. Boeing 757 Non-Destructive Testing (NDT) Manual Part 6, 51-00-19, Part 6, 51-00-23 
j. Multi-Operator Message (MOM) MOM-MOM-17-0037-01C 
2. Data Supplied with this Service Bulletin: 
None. 
3. Installation Drawings Used in the Preparation of this Service Bulletin: 
Refer to Boeing Service Bulletin 757-53A0108. 
K. Publications Affected 
1. Publications 
None.

### Page 41

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 39 of 41 
Aviation Partners Boeing Proprietary 
2. Damage Tolerance Based Structural Inspections: 
Aviation Partners Boeing  has evaluated the repairs  and/or changes in this service bulletin for effects 
on Fatigue Critical Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required 
in the Maintenance Program. This service bulletin affects FCS but no new DTIs are necessary. 
L. Interchangeability and Intermixability of Parts 
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts . 
M. Software Accomplishment Summary 
Not affected.

### Page 42

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 40 of 41 
Aviation Partners Boeing Proprietary 
2. MATERIAL INFORMATION 
A. Material - Price and Availability 
None. 
B. Industry Support Information 
APB warranty remedies are not available for the inspections given in this service bulletin.  
C. Parts Necessary for Each Airplane 
1. Kits/Parts 
None. 
2. Parts and Materials Supplied by the Operator: 
None. 
3. Parts Modified and Re-identified 
None. 
4. Parts Removed and Not Replaced 
None. 
D. Parts Necessary to Change Spares 
None 
E. Special Tooling – Price Availability 
None. 
F. Special Tooling Necessary to do this Service Bulletin 
Refer to Boeing Service Bulletin 757-53A0108.

### Page 43

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-53-001 
Original Issue: May 22, 2017 AP757-53-001 
Revision 2: October 22, 2019 Page 41 of 41 
Aviation Partners Boeing Proprietary 
3. ACCOMPLISHMENT INSTRUCTIONS 
A. GENERAL INFORMATION 
Refer to Boeing Service Bulletin 757-53A0108, revision 1 , or later approved revisions published on 
myboeingfleet. 
Some steps in the Work Instructions are labeled as Required for Compliance (RC). If this service bulletin is 
mandated by an Airworthiness Directive (AD), then the steps labeled as RC, including sub -steps under an 
RC step and any figures identified in an RC step, must be done to comply with the AD. If a step or sub-step 
is labeled “RC Exempt”, then the RC require ment is removed from that step or sub -step. An Alternative 
Method of Compliance (AMOC) is required for any deviations to RC steps, including sub -steps and 
identified figures. Steps not labeled as RC may be deviated from using accepted methods in accordance  
with the operator’s maintenance or inspection program without obtaining approval of an AMOC. This is 
provided that the RC steps, including sub -steps and identified figures, can still be done as specified, and 
the airplane can be put back in an airworthy condition. 
Do the actions at the applicable initial and repetitive compliance times specified in paragraph 1.E. 
Compliance of this service bulletin. 
B. WORK INSTRUCTIONS 
1. RC – Do an inspection of the fuselage frame for existing frame repairs, inspections for cracking in any 
area with no existing frame repair, and repair of any crack found, in accordance with Boeing Alert 
Service Bulletin 757-53A0108, revision 1, or later approved revisions published on myboeingfleet. 
Perform all inspections at the thresholds and repeat intervals in accordance with Paragraph 1.E, 
Compliance of this service bulletin. 
 For Group 1, Configuration 1 airplanes  identified in this service bu lletin, use the instructions for 
Group 1, Configuration 1 airplanes in Boeing Alert Service Bulletin 757-53A0108, revision 1 or later. 
 For Group 1, Configuration 2 airplanes identified in this service bulletin, use the instructions for 
Group 1, Configuration 2 airplanes in Boeing Alert Service Bulletin 757-53A0108, revision 1 or later. 
 For Group 1, Configuration 3 airplanes identified in this service bulletin, use the instructions for 
Group 1, Configuration 3 airplanes in Boeing Alert Service Bulletin 757-53A0108, revision 1 or later. 
 For Group 3, Configuration 1 airplanes identified in this service bulletin, use the instructions for 
Group 3, Configuration 1 airplanes in Boeing Alert Service Bulletin 757-53A0108, revision 1 or later. 
 For Group 3, Configuration 2 airplanes identified in this service bulletin, use the instructions for 
Group 3, Configuration 2 airplanes in Boeing Alert Service Bulletin 757-53A0108, revision 1 or later. 
 For Group 3, Configuration 3 airplanes identified in this service bulletin, use the instructions for 
Group 3, Configuration 3 airplanes in Boeing Alert Service Bulletin 757-53A0108, revision 1 or later. 
2. Put the airplane back to a serviceable condition.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
