# Aviation Partners Boeing Alert Service Bulletin AP757-57-011

Copy: No revision named ("AP757-57-011"), 27 pages: PDF https://openairdocs.org/files/sha256/55/f4/55f4c48d2b31de3203473789d797321f8ffd412466beaab97a61efead9544e3e; text https://openairdocs.org/service-documents/aviation-partners-boeing/ap757-57-011/file/55f4c48d2b31.md. Rights: © Aviation Partners Boeing. Filed by the FAA in regulations.gov docket FAA-2021-0262; AD 2021-22-23 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Aviation Partners Boeing](https://openairdocs.org/service-documents/aviation-partners-boeing.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: AP757-57-011
- Page: https://openairdocs.org/service-documents/aviation-partners-boeing/ap757-57-011

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2021-22-23](https://openairdocs.org/ad/2021-22-23.md), effective Dec 29, 2021: No revision named

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/aviation-partners-boeing/ap757-57-011/proposed.md).

## Text (27 pages)

Rights: © Aviation Partners Boeing. Filed by the FAA in regulations.gov docket FAA-2021-0262; AD 2021-22-23 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

AVIATION PARTNERS BOEING SERVICE BULLETIN 
2811 S 102nd Street, Suite 200 
Seattle, WA 98168 
(206) 830-7699 
 
Original Issue: August 21, 2020 AP757-57-011 
 Page 1 of 27 
Aviation Partners Boeing Proprietary 
 ALERT      NUMBER: AP757-57-011 Transmittal Sheet 
Original Issue: August 21, 2020  
ATA SYSTEM: 5720  
SUBJECT: Wing - Outer Wing - Lower Aft Wing Skin - Inspection

### Page 2

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-57-011 
 
Original Issue: August 21, 2020 AP757-57-011 
 Page 2 of 27 
Aviation Partners Boeing Proprietary 
APB DOCUMENT FEEDBACK FORM 
To provide feedback on this document to APB for corrections or improvements, please complete the form below 
and fax or email to the attention of APB Liaison Engineering at: 
Fax: +1 (206) 767-0535 
Email: leng@aviationpartners.com 
Airline Name: ______________________________________________ 
Contact Name: ______________________________________________ 
Phone Number: ______________________________________________ 
Email Address: ______________________________________________ 
Airplane Model-Type: ______________________________________________ 
Document Number: ______________________________________________ 
Document Revision: ______________________________________________ 
Document Title: ______________________________________________ 
Chapter-Section-
Subject: ______________________________________________ 
Page: ______________________________________________ 
Page Date: ______________________________________________ 
Description of Change: 
(Include additional 
sheets as required) 
 
 
 
 
 
 
 
 
 
 
 
 
 
Attachments: ______________________________________________

### Page 3

AVIATION PARTNERS BOEING SERVICE BULLETIN 
2811 S 102nd Street, Suite 200 
Seattle, WA 98168 
(206) 830-7699 
 
Original Issue: August 21, 2020 AP757-57-011 
 Page 3 of 27 
Aviation Partners Boeing Proprietary 
 ALERT      
NUMBER: AP757-57-011  
Original Issue: August 21, 2020  
ATA SYSTEM: 5720  
SUBJECT: Wing - Outer Wing - Lower Aft Wing Skin - Inspection 
 
 
PROPRIETARY NOTICE 
The data contained hereon and herein is proprietary to Aviation Partners Boeing. Neither this data nor the data 
contained herein shall be reproduced, used or disclosed to others without the written authorization of Aviation 
Partners Boeing. 
 
EXPORT CONTROLLED TECHNOLOGY 
This document contains information about a technology controlled by the Export Administration Regulations (EAR) 
(15 CFR 730-774). It has been classified under Export Control Classification Number (ECCN) 9E991 and may not 
be exported to certain countries without a license. Providing this information to a foreign national – inside or outside 
the United States – can constitute a prohibited export. Each person handling this document has a legal responsibility 
to comply with all applicable EAR requirements and should consult with an Export Control Officer before providing 
it to any foreign national.

### Page 4

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-57-011 
 
Original Issue: August 21, 2020 AP757-57-011 
 Page 4 of 27 
Aviation Partners Boeing Proprietary 
Table of Contents 
1. PLANNING INFORMATION ...................................................................................................................... 6 
A. Effectivity.................................................................................................................................................... 6 
1. Airplanes .................................................................................................................................................... 6 
2. Spares Affected ......................................................................................................................................... 6 
B. Concurrent Requirements .......................................................................................................................... 6 
C. Reason ....................................................................................................................................................... 7 
D. Description ................................................................................................................................................. 7 
E. Compliance ................................................................................................................................................ 8 
F. Approval ................................................................................................................................................... 13 
G. Manpower ................................................................................................................................................ 13 
H. Weight and Balance Changes ................................................................................................................. 13 
I. Electrical Load Data ................................................................................................................................. 13 
J. References .............................................................................................................................................. 13 
1. Existing Data: ........................................................................................................................................... 13 
2. Data Supplied with this Service Bulletin: ................................................................................................. 14 
3. Installation Drawings Used in the Preparation of this Service Bulletin: ................................................... 14 
K. Publications Affected ............................................................................................................................... 14 
1. Publications ............................................................................................................................................. 14 
2. Damage Tolerance Based Structural Inspections: .................................................................................. 14 
L. Interchangeability and Intermixability of Parts ......................................................................................... 14 
M. Software Accomplishment Summary ....................................................................................................... 14 
2. MATERIAL INFORMATION ..................................................................................................................... 14 
A. Material - Price and Availability ............................................................................................................... 14 
B. Industry Support Information ................................................................................................................... 14 
C. Parts Necessary for Each Airplane .......................................................................................................... 14 
1. Kits/Parts.................................................................................................................................................. 14 
2. Parts and Materials Supplied by the Operator:........................................................................................ 14 
3. Parts Modified and Re-identified ............................................................................................................. 14 
4. Parts Removed and Not Replaced .......................................................................................................... 14 
D. Parts Necessary to Change Spares ........................................................................................................ 14 
E. Special Tooling – Price Availability .......................................................................................................... 14 
F. Special Tooling Necessary to do this Service Bulletin ............................................................................ 15 
3. ACCOMPLISHMENT INSTRUCTIONS ................................................................................................... 15 
A. GENERAL INFORMATION ..................................................................................................................... 15 
B. WORK INSTRUCTIONS .......................................................................................................................... 15 
 
 
FIGURE 3: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION OF THE LOWER AFT WING SKIN, 
AFT EDGE AT FLAP TRACK NUMBER 1 (WBL 492) ATTACHMENT LOCATION ........................... 19 
FIGURE 4: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION OF THE LOWER AFT WING SKIN, 
AFT EDGE AT FLAP TRACK NUMBER 8 (WBL 492) ATTACHMENT LOCATION ........................... 21

### Page 5

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-57-011 
Original Issue: August 21, 2020 AP757-57-011 
 Page 5 of 27 
Aviation Partners Boeing Proprietary 
APPENDIX A: #2/#7 ATTACHMENT COMPLIANCE TIME CALCULATION FOR GROUP 2 AIRPLANES .......... 23 
APPENDIX B: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION OF THE LOWER AFT WING SKIN, 
AFT EDGE AT FLAP TRACK NUMBER 1, 2, 7, AND 8 ATTACHMENT LOCATIONS ...................... 24 
APPENDIX C: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION OF THE LOWER AFT WING SKIN, 
AFT EDGE AT FLAP TRACK NUMBER 1, 2, 7, AND 8 ATTACHMENT LOCATIONS ...................... 26

### Page 6

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-57-011 
 
Original Issue: August 21, 2020 AP757-57-011 
 Page 6 of 27 
Aviation Partners Boeing Proprietary 
1. PLANNING INFORMATION 
A. Effectivity 
RC: Start 
1. Airplanes 
This service bulletin is applicable to 757-200 Airplanes with Blended Winglets or Scimitar Blended 
Winglets, and 757-300 Airplanes with Blended Winglets (Refer to STC ST01518SE). 
GROUP CONFIGURATION DESCRIPTION 
1 STC ST01518SE 
installed 757-200 Airplanes 
2 STC ST01518SE 
installed 757-300 Airplanes 
Note: This service bulletin does not contain 757-200CB or 757-200PF (Group 1) airplanes. Group and 
Table designation in this service bulletin aligns with Boeing Service Bulletin 757-57A0074. 
RC: End 
RC: Start 
2. Spares Affected 
None 
RC: End 
RC: Start 
B. Concurrent Requirements 
The service bulletin listed below must be done at the same time as this service bulletin: 
Company Service Bulletin Description 
The Boeing Company 757-57A0074, Original Issue, 
or later approved  revisions 
published on myboeingfleet. 
Do a high frequency eddy current (HFEC) 
inspection of the left and right lower aft wing 
skin aft edge where the flap tracks attach to 
the track support fittings at flap track number 2 
(WBL 361), and flap track number 7 (WBL 361) 
for any crack. If any crack is found, contact the 
Boeing Company for repair instructions, and do 
the repair. 
If no crack is found do a repeat HFEC 
inspection of the left and right wing, lower aft 
wing skin aft edge at flap track number 2 (WBL 
361), and flap track number 7 (WBL 361), for 
any crack. 
RC: End

### Page 7

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-57-011 
Original Issue: August 21, 2020 AP757-57-011 
 Page 7 of 27 
Aviation Partners Boeing Proprietary 
C. Reason 
Accomplishment of this service bulletin will make sure any crack in the left and right wing, lower aft wing 
skin aft edge, where the flap tracks attach to the track support fittings, at flap track numbers 1 (WBL 492) 
and 2 (WBL 361), and flap track numbers 7 (WBL 361) and 8 (WBL 492) is found. If this bulletin is not done, 
an undetected crack in the lower aft wing skin could result in the inability of the structure to carry limit load 
and could adversely affect the structural integrity of the airplane. 
During teardown of a 737-300, crack indications were found in the lower aft wing skin bolt holes where 
the flap tracks attach to the track support fitting at flap track number 1, flap track number 2, and flap track 
number 3. Crack indications at flap track number 2 and flap track number 3 were confirmed by a 
metallurgical lab to have cracks. The indication at flap track number 1 was confirmed by the metallurgical 
lab to have some corrosion in the hole of the fitting, but no crack in the skin. This damage is the result of 
local stresses being higher than expected. The left and right wing, lower aft wing skin pad up length is 
insufficient to reduce stress. The crack finding occurred at 67,695 flight cycles / 80,269 flight hours. The 
757 is of similar design, with flap track attachment to the wing rear spar through skin overhang and 
fittings, for flap track numbers 1 (WBL 492) and 2 (WBL 361), and flap track numbers 7 (WBL 361) and 8 
(WBL 492). 
This service bulletin gives instructions to do a High Frequency Eddy Current (HFEC) inspection of the left 
and right wing, lower aft wing skin aft edge at flap track numbers 1 (WBL 492) and 2 (WBL 361), and flap 
track numbers 7 (WBL 361) and 8 (WBL 492), for any crack. The instructions refer to Boeing Service 
Bulletin 757-57A0074 at flap track number 2 (WBL 361) and flap track number 7 (WBL 361), and provide 
additional inspection requirements at flap track number 1 (WBL 492) and 8 (WBL 492). Compliance times 
are adjusted for inspections at flap track number 2 (WBL 361) and flap track number 7 (WBL 361), and 
replace the compliance times in Boeing SB 757-57A0074 for Group 1 and 2 airplanes due to load 
changes associated with STC ST01518SE. 
Boeing Service Related Problem (SRP) 757-57-0341 is related to this service bulletin. 
Boeing Fleet Team Digest (FTD) 757-FTD-57-18001 is related to this service bulletin. 
D. Description 
Do a high frequency eddy current (HFEC) inspection of the left and right lower aft wing skin aft edge 
where the flap tracks attach to the track support fittings at flap track numbers 1 (WBL 492) and 2 (WBL 
361), and flap track numbers 7 (WBL 361) and 8 (WBL 492), for any crack. If any crack is found, contact 
the Boeing Company for repair instructions, and do the repair. 
If no crack is found do a repeat HFEC inspection of the left and right wing, lower aft wing skin aft edge at 
flap track numbers 1 (WBL 492) and 2 (WBL 361), and flap track numbers 7 (WBL 361) and 8 (WBL 492), 
for any crack. 
The work in this service bulletin is done in the maintenance zone(s) given below. 
Group 1: 
Affected Maintenance Zones 
Model Zone 
757-200 561, 573, 574, 661, 673, 674

### Page 8

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-57-011 
Original Issue: August 21, 2020 AP757-57-011 
 Page 8 of 27 
Aviation Partners Boeing Proprietary 
Group 2: 
Affected Maintenance Zones 
Model Zone 
757-300 561, 573, 574, 661, 673, 674 
 
RC: Start 
E. Compliance 
The Federal Aviation Administration (FAA) will possibly release an Airworthiness Directive (AD) related to 
this service bulletin. The Airworthiness Directive will make the compliance tasks and times given in this 
service bulletin mandatory. 
Accomplish the required action(s), based on the applicable condition(s) in Tables 1, 2, 3, and 4, in 
accordance with the Accomplishment Instructions. 
When more than one OPTION is given for a CONDITION, do only one of the OPTION numbers. When 
more than one ACTION is given for a CONDITION or an OPTION, do all of the ACTION numbers for that 
CONDITION or OPTION.

### Page 9

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-57-011 
Original Issue: August 21, 2020 AP757-57-011 
 Page 9 of 27 
Aviation Partners Boeing Proprietary 
Group 1: 
Table 1: High Frequency Eddy Current (HFEC) inspection of the left and right wing, lower aft wing skin aft 
edge at flap track number 2 (WBL 361) and flap track number 7 (WBL 361) attachment locations 
Condition Action Compliance Time (Whichever Occurs 
Later) 
Repeat 
Interval 
(Not to 
Exceed) 
All Airplanes ACTION 1: Do a HFEC 
inspection of the lower aft 
wing skin, aft edge, at flap 
track number 2 (WBL 361) 
attachment location, for any 
crack. 
The compliance times given in 
1., 2., and 3., whichever 
occurs first: 
1.  Before 120,000 total 
flight hours 
 
2.  Before 50,000 total 
flight cycles 
  
3.  Before the result of 
80000-(0.5 X TFH) – 
TFC is less than or 
equal to zero. 
TFC = Total Flight Cycles 
TFH = Total Flight Hours 
Within 
2,700 
flight 
cycles 
after 
the 
original 
issue 
date of 
this 
service 
bulletin 
- 
ACTION 2: Do a HFEC 
inspection of the lower aft 
wing skin, aft edge, at flap 
track number 7 (WBL 361) 
attachment location, for any 
crack. 
- 
CONDITION 1: NO 
CRACK FOUND AT FLAP 
TRACK NUMBER 2 (WBL 
361) ATTACHMENT 
LOCATION. (a) 
Do a repeat HFEC inspection 
of the lower aft wing skin, aft 
edge, flap track number 2 
(WBL 361) attachment 
location for any crack. 
- 6,000 flight 
cycles 
CONDITION 2: ANY 
CRACK FOUND AT FLAP 
TRACK NUMBER 2 (WBL 
361) ATTACHMENT 
LOCATION. (a) 
Contact The Boeing 
Company for repair 
instructions and do the repair. 
Before further flight - 
CONDITION 3: NO 
CRACK FOUND AT FLAP 
TRACK NUMBER 7 (WBL 
361) ATTACHMENT 
LOCATION. (a) 
Do a repeat HFEC inspection 
of the lower aft wing skin, aft 
edge, flap track number 7 
(WBL 361) attachment 
location for any crack. 
- 6,000 flight 
cycles 
CONDITION 4: ANY 
CRACK FOUND AT FLAP 
TRACK NUMBER 7 (WBL 
361) ATTACHMENT 
LOCATION. (a) 
Contact The Boeing 
Company for repair 
instructions and do the repair. 
Before further flight - 
(a) More than one CONDITION can be applicable on each airplane.

### Page 10

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-57-011 
Original Issue: August 21, 2020 AP757-57-011 
 Page 10 of 27 
Aviation Partners Boeing Proprietary 
Group 2: 
Table 2: High Frequency Eddy Current (HFEC) inspection of the left and right wing, lower aft wing skin aft 
edge at flap track number 2 (WBL 361) and flap track number 7 (WBL 361) attachment locations 
Condition Action Compliance Time (Whichever Occurs 
Later) 
Repeat 
Interval (Not 
to Exceed) 
All Airplanes ACTION 1: Do a HFEC 
inspection of the lower aft 
wing skin, aft edge, at flap 
track number 2 (WBL 361) 
attachment location, for any 
crack. 
The compliance times given in 
1 and 2, whichever occurs 
first: 
1.  Before the result of A+ 
(58100 x (88000-A) / 
88000) - TFH is less 
than or equal to zero. 
2.  Before the result of B 
+ (24200 x (36000-B) / 
36000) - TFC is less 
than or equal to zero. 
A = Flight Hours at Initial 
Winglet STC Installation 
B = Flight Cycles at Initial 
Winglet STC Installation 
TFC = Total Flight Cycles 
TFH = Total Flight Hours 
Within 
2,700 
flight 
cycles 
after 
the 
original 
issue 
date of 
this 
service 
bulletin 
- 
ACTION 2: Do a HFEC 
inspection of the lower aft 
wing skin, aft edge, at flap 
track number 7 (WBL 361) 
attachment location, for any 
crack. 
- 
CONDITION 1: NO 
CRACK FOUND AT FLAP 
TRACK NUMBER 2 (WBL 
361) ATTACHMENT 
LOCATION. (a) 
Do a repeat HFEC inspection 
of the lower aft wing skin, aft 
edge, flap track number 2 
(WBL 361) attachment 
location for any crack. 
- 6,000 flight 
cycles 
CONDITION 2: ANY 
CRACK FOUND AT FLAP 
TRACK NUMBER 2 (WBL 
361) ATTACHMENT 
LOCATION. (a) 
Contact The Boeing 
Company for repair 
instructions and do the repair. 
Before further flight - 
CONDITION 3: NO 
CRACK FOUND AT FLAP 
TRACK NUMBER 7 (WBL 
361) ATTACHMENT 
LOCATION. (a) 
Do a repeat HFEC inspection 
of the lower aft wing skin, aft 
edge, flap track number 7 
(WBL 361) attachment 
location for any crack. 
- 6,000 flight 
cycles 
CONDITION 4: ANY 
CRACK FOUND AT FLAP 
TRACK NUMBER 7 (WBL 
361) ATTACHMENT 
LOCATION. (a) 
Contact The Boeing 
Company for repair 
instructions and do the repair. 
Before further flight - 
(a) More than one CONDITION can be applicable on each airplane.

### Page 11

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-57-011 
Original Issue: August 21, 2020 AP757-57-011 
 Page 11 of 27 
Aviation Partners Boeing Proprietary 
Group 1: 
Table 3: High Frequency Eddy Current (HFEC) inspection of the left and right wing, lower aft wing skin aft 
edge at flap track number 1 (WBL 492) and flap track number 8 (WBL 492) attachment locations 
Condition Action Compliance Time (Whichever Occurs 
Later) 
Repeat 
Interval (Not 
to Exceed) 
All Airplanes ACTION 3: Do a HFEC 
inspection of the lower aft 
wing skin, aft edge, at flap 
track number 1 (WBL 492) 
attachment location, for any 
crack. 
The compliance times given in 
1., 2., and 3., whichever 
occurs first: 
1.  Before 120,000 total 
flight hours 
 
2.  Before 50,000 total 
flight cycles 
  
3.  Before the result of 
80000-(0.5 X TFH) – 
TFC is less than or 
equal to zero. 
TFC = Total Flight Cycles 
TFH = Total Flight Hours 
Within 
2,700 
flight 
cycles 
after 
the 
original 
issue 
date of 
this 
service 
bulletin 
- 
ACTION 4: Do a HFEC 
inspection of the lower aft 
wing skin, aft edge, at flap 
track number 8 (WBL 492) 
attachment location, for any 
crack. 
- 
CONDITION 5: NO 
CRACK FOUND AT FLAP 
TRACK NUMBER 1 (WBL 
492) ATTACHMENT 
LOCATION. (a) 
Do a repeat HFEC inspection 
of the lower aft wing skin, aft 
edge, flap track number 1 
(WBL 492) attachment 
location for any crack. 
- 18,000 flight 
cycles 
CONDITION 6: ANY 
CRACK FOUND AT FLAP 
TRACK NUMBER 1 (WBL 
492) ATTACHMENT 
LOCATION. (a) 
Contact The Boeing 
Company for repair 
instructions and do the repair. 
Before further flight - 
CONDITION 7: NO 
CRACK FOUND AT FLAP 
TRACK NUMBER 8 (WBL 
492) ATTACHMENT 
LOCATION. (a) 
Do a repeat HFEC inspection 
of the lower aft wing skin, aft 
edge, flap track number 8 
(WBL 492) attachment 
location for any crack. 
- 18,000 flight 
cycles 
CONDITION 8: ANY 
CRACK FOUND AT FLAP 
TRACK NUMBER 8 (WBL 
492) ATTACHMENT 
LOCATION. (a) 
Contact The Boeing 
Company for repair 
instructions and do the repair. 
Before further flight - 
(a) More than one CONDITION can be applicable on each airplane.

### Page 12

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-57-011 
Original Issue: August 21, 2020 AP757-57-011 
 Page 12 of 27 
Aviation Partners Boeing Proprietary 
Group 2: 
Table 4: High Frequency Eddy Current (HFEC) inspection of the left and right wing, lower aft wing skin aft 
edge at flap track number 1 (WBL 492) and flap track number 8 (WBL 492) attachment locations 
Condition Action Compliance Time (Whichever Occurs 
Later) 
Repeat 
Interval (Not 
to Exceed) 
All Airplanes ACTION 3: Do a HFEC 
inspection of the lower aft 
wing skin, aft edge, at flap 
track number 1 (WBL 492) 
attachment location, for any 
crack. 
Before 81,000 total flight hours 
or 34,000 total flight cycles, 
whichever occurs first. 
Within 
2,700 
flight 
cycles 
after 
the 
original 
issue 
date of 
this 
service 
bulletin 
- 
ACTION 4: Do a HFEC 
inspection of the lower aft 
wing skin, aft edge, at flap 
track number 8 (WBL 492) 
attachment location, for any 
crack. 
- 
CONDITION 5: NO 
CRACK FOUND AT FLAP 
TRACK NUMBER 1 (WBL 
492) ATTACHMENT 
LOCATION. (a) 
Do a repeat HFEC inspection 
of the lower aft wing skin, aft 
edge, flap track number 1 
(WBL 492) attachment 
location for any crack. 
- 20,000 flight 
cycles 
CONDITION 6: ANY 
CRACK FOUND AT FLAP 
TRACK NUMBER 1 (WBL 
492) ATTACHMENT 
LOCATION. (a) 
Contact The Boeing 
Company for repair 
instructions and do the repair. 
Before further flight - 
CONDITION 7: NO 
CRACK FOUND AT FLAP 
TRACK NUMBER 8 (WBL 
492) ATTACHMENT 
LOCATION. (a) 
Do a repeat HFEC inspection 
of the lower aft wing skin, aft 
edge, flap track number 8 
(WBL 492) attachment 
location for any crack. 
- 20,000 flight 
cycles 
CONDITION 8: ANY 
CRACK FOUND AT FLAP 
TRACK NUMBER 8 (WBL 
492) ATTACHMENT 
LOCATION. (a) 
Contact The Boeing 
Company for repair 
instructions and do the repair. 
Before further flight - 
(a) More than one CONDITION can be applicable on each airplane. 
RC: End

### Page 13

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-57-011 
Original Issue: August 21, 2020 AP757-57-011 
 Page 13 of 27 
Aviation Partners Boeing Proprietary 
 
F. Approval 
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified in 
this service bulletin comply with the applicable regulations and are FAA approved. This service bulletin and 
its approval were based on the installation of APB STC ST01518SE. 
If an airplane has a non-Boeing modification, non-APB modification, or repair that affects a component or 
system also affected by this service bulletin, the operator is responsible for obtaining appropriate regulatory 
agency approval before incorporating this service bulletin. 
G. Manpower 
The table below shows an estimate of the task hours necessary to do this inspection for each airplane. This 
estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator task hour 
data if necessary. The estimate does not include lost time. These are some examples of lost time: 
 Time to adjust to the workplace 
 Time to schedule the work 
 Time to inspect the work 
 Time to cure the materials 
 Time to make the parts 
 Time to find the tools 
 
Task Number of Persons Task Hours Elapsed Hours 
Open Access 1 0.4 0.4 
FIGURE 1 1 0.5 0.5 
FIGURE 2 1 0.5 0.5 
FIGURE 3 1 0.5 0.5 
FIGURE 4 1 0.5 0.5 
Close Access 1 0.4 0.4 
TOTAL FOR EACH AIRPLANE 2.8 2.8 
 
H. Weight and Balance Changes 
Not changed. 
I. Electrical Load Data 
Not changed 
J. References 
1. Existing Data: 
a. Boeing Service Bulletin 757-57A0074 RB 
b. Boeing Service Letter 757-SL-51-022 
c. Boeing Service Related Problem (SRP) 757-57-0341

### Page 14

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-57-011 
Original Issue: August 21, 2020 AP757-57-011 
 Page 14 of 27 
Aviation Partners Boeing Proprietary 
d. Boeing Service Bulletin Index D624N001 
e. Fleet Team Digest (FTD) 757-FTD-57-18001 
f. Boeing 757 Non-Destructive Testing (NDT) Manual Part 6, 51-00-01, Part 6, 51-00-19 
g. Boeing 757-200 Aircraft Maintenance Manual (AMM) 27-51-00 
h. Boeing 757-300 Aircraft Maintenance Manual (AMM) 27-51-00 
2. Data Supplied with this Service Bulletin: 
None. 
3. Installation Drawings Used in the Preparation of this Service Bulletin: 
Refer to Boeing Service Bulletin 757-57A0074. 
K. Publications Affected 
1. Publications 
None. 
2. Damage Tolerance Based Structural Inspections: 
This service bulletin affects Fatigue Critical Structure (FCS) but does not contain repairs or changes. 
L. Interchangeability and Intermixability of Parts 
Accomplishment of this service bulletin does not affect interchangeability or intermixability of parts. 
M. Software Accomplishment Summary 
Not affected. 
2. MATERIAL INFORMATION 
A. Material - Price and Availability 
None. 
B. Industry Support Information 
APB warranty remedies are not available for the inspection procedures given in this service bulletin. 
C. Parts Necessary for Each Airplane 
1. Kits/Parts 
None. 
2. Parts and Materials Supplied by the Operator: 
None. 
3. Parts Modified and Re-identified 
None. 
4. Parts Removed and Not Replaced 
None. 
D. Parts Necessary to Change Spares 
None 
E. Special Tooling – Price Availability 
None.

### Page 15

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-57-011 
Original Issue: August 21, 2020 AP757-57-011 
 Page 15 of 27 
Aviation Partners Boeing Proprietary 
F. Special Tooling Necessary to do this Service Bulletin 
Refer to Boeing Service Bulletin 757-57A0074. 
3. ACCOMPLISHMENT INSTRUCTIONS 
A. GENERAL INFORMATION 
Refer to Boeing Service Bulletin 757-57A0074. 
Some steps in the Work Instructions are labeled as Required for Compliance (RC). If this service bulletin is 
mandated by an Airworthiness Directive (AD), then the steps labeled as RC, including sub-steps under an 
RC step and any figures identified in an RC step, must be done to comply with the AD. If a step or sub-step 
is labeled “RC Exempt”, then the RC requirem ent is removed from that step or sub -step. An Alternative 
Method of Compliance (AMOC) is required for any deviations to RC steps, including sub -steps and 
identified figures. Steps not labeled as RC may be deviated from using accepted methods in accordance 
with the operator’s maintenance or inspection program without obtaining approval of an AMOC. This is 
provided that the RC steps, including sub -steps and identified figures, can still be done as specified, and 
the airplane can be put back in an airworthy condition. 
B. WORK INSTRUCTIONS 
RC: Start 
Actions Required for Compliance: 
1. Requirements 
High Frequency Eddy Current (HFEC) inspection of the left and right wing, lower aft wing skin aft edge at 
flap track numbers 1 (WBL 492) and 2 (WBL 361) attachment locations, and flap track numbers 7 (WBL 361) 
and 8 (WBL 492) attachment locations 
Condition Action Method of Compliance Refer to the listed 
procedures in the service 
document at Original Issue 
or later approved revisions 
as an accepted procedure 
All Airplanes ACTION 1: Do a HFEC 
inspection of the lower 
aft wing skin, aft edge, at 
flap track number 2 
(WBL 361) attachment 
location, for any crack. 
- Boeing SB 757-57A0074 
PART 1: OPEN ACCESS 
Boeing 757-57A0074 
RB, Original Issue, 
dated June 11, 2020 
FIGURE 1 
- 
ACTION 2: Do a HFEC 
inspection of the lower 
aft wing skin, aft edge, at 
flap track number 7 
(WBL 361) attachment 
location, for any crack. 
Boeing 757-57A0074 
RB, Original Issue, 
dated June 11, 2020 
FIGURE 2 
-

### Page 16

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-57-011 
Original Issue: August 21, 2020 AP757-57-011 
 Page 16 of 27 
Aviation Partners Boeing Proprietary 
 
High Frequency Eddy Current (HFEC) inspection of the left and right wing, lower aft wing skin aft edge at 
flap track numbers 1 (WBL 492) and 2 (WBL 361) attachment locations, and flap track numbers 7 (WBL 361) 
and 8 (WBL 492) attachment locations 
Condition Action Method of Compliance Refer to the listed 
procedures in the service 
document at Original Issue 
or later approved revisions 
as an accepted procedure 
All Airplanes ACTION 3: Do a HFEC 
inspection of the lower 
aft wing skin, aft edge, at 
flap track number 1 
(WBL 492) attachment 
location, for any crack. 
FIGURE 3 - 
ACTION 4: Do a HFEC 
inspection of the lower 
aft wing skin, aft edge, at 
flap track number 8 
(WBL 492) attachment 
location, for any crack. 
FIGURE 4 -

### Page 17

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-57-011 
Original Issue: August 21, 2020 AP757-57-011 
 Page 17 of 27 
Aviation Partners Boeing Proprietary 
 
High Frequency Eddy Current (HFEC) inspection of the left and right wing, lower aft wing skin aft edge at 
attachment locations for flap track numbers 1 (WBL 492) and 2 (WBL 361), and flap track numbers 7 (WBL 
361) and 8 (WBL 492) 
Condition Action Method of Compliance Refer to the listed 
procedures in the service 
document at Original Issue 
or later approved revisions 
as an accepted procedure 
CONDITION 1: NO 
CRACK FOUND AT 
FLAP TRACK 
NUMBER 2 (WBL 361) 
ATTACHMENT 
LOCATION. (a) 
Do a repeat HFEC 
inspection of the lower 
aft wing skin, aft edge, 
flap track number 2 
(WBL 361) attachment 
location for any crack. 
Boeing 757-57A0074 
RB, Original Issue, 
dated June 11, 2020 
FIGURE 1 
- 
CONDITION 2: ANY 
CRACK FOUND AT 
FLAP TRACK 
NUMBER 2 (WBL 361) 
ATTACHMENT 
LOCATION. (a) 
Contact The Boeing 
Company for repair 
instructions and do the 
repair. 
- - 
CONDITION 3: NO 
CRACK FOUND AT 
FLAP TRACK 
NUMBER 7 (WBL 361) 
ATTACHMENT 
LOCATION. (a) 
Do a repeat HFEC 
inspection of the lower 
aft wing skin, aft edge, 
flap track number 7 
(WBL 361) attachment 
location for any crack. 
Boeing 757-57A0074 
RB, Original Issue, 
dated June 11, 2020 
FIGURE 2 
- 
CONDITION 4: ANY 
CRACK FOUND AT 
FLAP TRACK 
NUMBER 7 (WBL 361) 
ATTACHMENT 
LOCATION. (a) 
Contact The Boeing 
Company for repair 
instructions and do the 
repair. 
- - 
CONDITION 5: NO 
CRACK FOUND AT 
FLAP TRACK 
NUMBER 1 (WBL 492) 
ATTACHMENT 
LOCATION. (a) 
Do a repeat HFEC 
inspection of the lower 
aft wing skin, aft edge, 
flap track number 1 
(WBL 492) attachment 
location for any crack. 
FIGURE 3 - 
CONDITION 6: ANY 
CRACK FOUND AT 
FLAP TRACK 
NUMBER 1 (WBL 492) 
ATTACHMENT 
LOCATION. (a) 
Contact The Boeing 
Company for repair 
instructions and do the 
repair. 
- -

### Page 18

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-57-011 
Original Issue: August 21, 2020 AP757-57-011 
 Page 18 of 27 
Aviation Partners Boeing Proprietary 
High Frequency Eddy Current (HFEC) inspection of the left and right wing, lower aft wing skin aft edge at 
attachment locations for flap track numbers 1 (WBL 492) and 2 (WBL 361), and flap track numbers 7 (WBL 
361) and 8 (WBL 492) 
Condition Action Method of Compliance Refer to the listed 
procedures in the service 
document at Original Issue 
or later approved revisions 
as an accepted procedure 
CONDITION 7: NO 
CRACK FOUND AT 
FLAP TRACK 
NUMBER 8 (WBL 492) 
ATTACHMENT 
LOCATION. (a) 
Do a repeat HFEC 
inspection of the lower 
aft wing skin, aft edge, 
flap track number 8 
(WBL 492) attachment 
location for any crack. 
FIGURE 4 - 
- Boeing SB 757-57A0074 
PART 2: CLOSE ACCESS 
CONDITION 8: ANY 
CRACK FOUND AT 
FLAP TRACK 
NUMBER 8 (WBL 492) 
ATTACHMENT 
LOCATION. (a) 
Contact The Boeing 
Company for repair 
instructions and do the 
repair. 
- - 
- Boeing SB 757-57A0074 
PART 2: CLOSE ACCESS 
(a) More than one CONDITION can be applicable on each airplane. 
 
RC: End 
Procedures 
1. Refer to Boeing Service Bulletin 757-57A0074 PART 1 for open access. 
2. Refer to Boeing Service Bulletin 757-57A0074 PART 2 for close access. 
3. Put the airplane back to a serviceable condition.

### Page 19

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-57-011 
Original Issue: August 21, 2020 AP757-57-011 
 Page 19 of 27 
Aviation Partners Boeing Proprietary 
RC: Start 
 
 
FIGURE 3: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION OF THE LOWER AFT WING SKIN, 
AFT EDGE AT FLAP TRACK NUMBER 1 (WBL 492) ATTACHMENT LOCATION 
(SHEET 1 OF 2)  
FLAP TRACK 
NUMBER 1 
(WBL 492) 
 
LOWER AFT WING SKIN 
INSPECTION AREA 
FLAP TRACK NUMBER 1 ATTACHMENT AREA 
(VIEW LOOKING DOWN) 
1 
A 
A

### Page 20

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-57-011 
Original Issue: August 21, 2020 AP757-57-011 
 Page 20 of 27 
Aviation Partners Boeing Proprietary 
Step Task Name Identification Qty More Data 
1 Inspect LOWER WING SKIN - 1 (a) 
(a) Do a HFEC inspection of the lower aft wing skin, aft edge at the flap track number 1 (WBL 492) 
attachment location for any crack in accordance with 757 NDT Manual Part 6, 51-00-01 or 757 NDT 
Manual Part 6, 51-00-19. 
RC: End 
 
 
FIGURE 3: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION OF THE LOWER AFT WING SKIN, 
AFT EDGE AT FLAP TRACK NUMBER 1 (WBL 492) ATTACHMENT LOCATION 
(SHEET 2 OF 2)

### Page 21

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-57-011 
Original Issue: August 21, 2020 AP757-57-011 
 Page 21 of 27 
Aviation Partners Boeing Proprietary 
RC: Start 
 
FIGURE 4: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION OF THE LOWER AFT WING SKIN, 
AFT EDGE AT FLAP TRACK NUMBER 8 (WBL 492) ATTACHMENT LOCATION 
(SHEET 1 OF 2)  
INSPECTION AREA 
A 
 
LOWER AFT WING SKIN 
FLAP TRACK NUMBER 8 ATTACHMENT AREA 
(VIEW LOOKING DOWN) 
A 
FLAP TRACK 
NUMBER 8 
(WBL 492) 
1

### Page 22

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-57-011 
Original Issue: August 21, 2020 AP757-57-011 
 Page 22 of 27 
Aviation Partners Boeing Proprietary 
Step Task Name Identification Qty More Data 
1 Inspect LOWER WING SKIN - 1 (a) 
(a) Do a HFEC inspection of the lower aft wing skin, aft edge at the flap track number 8 (WBL 492) 
attachment location for any crack in accordance with 757 NDT Manual Part 6, 51-00-01 or 757 NDT 
Manual Part 6, 51-00-19. 
RC: End 
 
FIGURE 4: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION OF THE LOWER AFT WING SKIN, 
AFT EDGE AT FLAP TRACK NUMBER 8 (WBL 492) ATTACHMENT LOCATION 
(SHEET 2 OF 2)

### Page 23

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-57-011 
Original Issue: August 21, 2020 AP757-57-011 
 Page 23 of 27 
Aviation Partners Boeing Proprietary 
This Appendix applies only to: Group 2 airplanes with STC ST01518SE installed. 
#2/#7 Attachment Compliance Time Calculation 
X = A + 58100 x (88000 – A) / 88000 
Y = B + 24200 x (36000 – B) / 36000 
A 
(Airplane flight 
hours at time of 
winglet STC 
initial 
installation) 
B 
(Airplane flight 
cycles at time of 
winglet STC 
initial 
installation) 
 
 
(88000 – A) / 
88000 
 
 
(36000 – B) / 
36000 
X 
(Compliance 
threshold in 
total flight 
hours) 
Y 
(Compliance 
threshold in 
total flight 
cycles) 
      
EXAMPLE CALCULATION 
30000 12500 0.659 0.653 68288 28303 
 
APPENDIX A: #2/#7 ATTACHMENT COMPLIANCE TIME CALCULATION FOR GROUP 2 AIRPLANES 
(SHEET 1 OF 1)

### Page 24

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-57-011 
Original Issue: August 21, 2020 AP757-57-011 
 Page 24 of 27 
Aviation Partners Boeing Proprietary 
This Appendix applies only to: Group 1. 
Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary 
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source for 
tasks required for compliance. 
1. The table below gives the description for the parts and conditions called out in the logic diagrams. 
Title Description 
ACTION 1 DO A HFEC INSPECTION OF THE LOWER AFT WING SKIN, AFT EDGE AT FLAP 
TRACK NUMBER 2 (WBL 361) ATTACHMENT LOCATION FOR ANY CRACK 
ACTION 2 DO A HFEC INSPECTION OF THE LOWER AFT WING SKIN, AFT EDGE AT FLAP 
TRACK NUMBER 7 (WBL 361) ATTACHMENT LOCATION FOR ANY CRACK 
ACTION 3 DO A HFEC INSPECTION OF THE LOWER AFT WING SKIN, AFT EDGE AT FLAP 
TRACK NUMBER 1 (WBL 492) ATTACHMENT LOCATION FOR ANY CRACK 
ACTION 4 DO A HFEC INSPECTION OF THE LOWER AFT WING SKIN, AFT EDGE AT FLAP 
TRACK NUMBER 8 (WBL 492) ATTACHMENT LOCATION FOR ANY CRACK 
CONDITION 1 NO CRACK FOUND AT FLAP TRACK NUMBER 2 (WBL 361) ATTACHMENT 
LOCATION. 
CONDITION 2 ANY CRACK FOUND AT FLAP TRACK NUMBER 2 (WBL 361) ATTACHMENT 
LOCATION. 
CONDITION 3 NO CRACK FOUND AT FLAP TRACK NUMBER 7 (WBL 361) ATTACHMENT 
LOCATION. 
CONDITION 4 ANY CRACK FOUND AT FLAP TRACK NUMBER 7 (WBL 361) ATTACHMENT 
LOCATION. 
CONDITION 5 NO CRACK FOUND AT FLAP TRACK NUMBER 1 (WBL 492) ATTACHMENT 
LOCATION. 
CONDITION 6 ANY CRACK FOUND AT FLAP TRACK NUMBER 1 (WBL 492) ATTACHMENT 
LOCATION. 
CONDITION 7 NO CRACK FOUND AT FLAP TRACK NUMBER 8 (WBL 492) ATTACHMENT 
LOCATION. 
CONDITION 8 ANY CRACK FOUND AT FLAP TRACK NUMBER 8 (WBL 492) ATTACHMENT 
LOCATION. 
2. The table below gives the description for the flag notes called out in the logic diagram. 
Flag Note Letter Description 
(a) More than one CONDITION can be applicable to each airplane. 
 
APPENDIX B: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION OF THE LOWER AFT WING 
SKIN, AFT EDGE AT FLAP TRACK NUMBER 1, 2, 7, AND 8 ATTACHMENT LOCATIONS 
(SHEET 1 OF 2)

### Page 25

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-57-011 
 
Original Issue: August 21, 2020 AP757-57-011 
 Page 25 of 27 
Aviation Partners Boeing Proprietary 
 
APPENDIX B: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION OF THE LOWER AFT WING SKIN, AFT EDGE AT FLAP TRACK NUMBER 1, 2, 
7, AND 8 ATTACHMENT LOCATIONS (SHEET 2 OF 2) 
WHICHEVER OCCURS LATER 
THE COMPLIANCE TIMES GIVEN IN 1., 2., AND 3., WHICHEVER 
OCCURS FIRST: 
1. 120,000 TFH 
2. 50,000 TFC 
3. BEFORE THE RESULT OF 80000-(0.5 X TFH) – TFC IS LESS 
THAN OR EQUAL TO ZERO. 
TFC = TOTAL FLIGHT CYCLES 
TFH = TOTAL FLIGHT HOURS 
WITHIN 2,700 FLIGHT CYCLES AFTER THE ORIGINAL ISSUE 
DATE OF THIS SERVICE BULLETIN 
ACTION 1 
CONDITION 1 
(a) 
 CONDITION 2 
(a) 
ACTION 2 
CONDITION 3 
(a) 
 CONDITION 4 
(a) 
ACTION 3 
CONDITION 5 
(a) 
 CONDITION 6 
(a) 
ACTION 4 
CONDITION 7 
(a) 
 CONDITION 8 
(a) 
NOT TO EXCEED 
6,000 FLIGHT 
CYCLES 
BEFORE FURTHER 
FLIGHT 
NOT TO EXCEED 
6,000 FLIGHT 
CYCLES 
BEFORE FURTHER 
FLIGHT 
NOT TO EXCEED 
18,000 FLIGHT 
CYCLES 
BEFORE FURTHER 
FLIGHT 
NOT TO EXCEED 
18,000 FLIGHT 
CYCLES 
BEFORE FURTHER 
FLIGHT 
REPEAT HFEC 
INSPECTION OF 
THE LOWER AFT 
WING SKIN, AFT 
EDGE, FLAP 
TRACK NUMBER 
2 ATTACHMENT 
FOR ANY 
CRACK. 
CONTACT THE 
BOEING 
COMPANY FOR 
REPAIR 
INSTRUCTIONS, 
AND DO THE 
REPAIR. 
REPEAT HFEC 
INSPECTION OF 
THE LOWER AFT 
WING SKIN, AFT 
EDGE, FLAP 
TRACK NUMBER 
7 ATTACHMENT 
FOR ANY 
CRACK. 
CONTACT THE 
BOEING 
COMPANY FOR 
REPAIR 
INSTRUCTIONS, 
AND DO THE 
REPAIR. 
REPEAT HFEC 
INSPECTION OF 
THE LOWER AFT 
WING SKIN, AFT 
EDGE, FLAP 
TRACK NUMBER 
1 ATTACHMENT 
FOR ANY 
CRACK. 
CONTACT THE 
BOEING 
COMPANY FOR 
REPAIR 
INSTRUCTIONS, 
AND DO THE 
REPAIR. 
REPEAT HFEC 
INSPECTION OF 
THE LOWER AFT 
WING SKIN, AFT 
EDGE, FLAP 
TRACK NUMBER 
8 ATTACHMENT 
FOR ANY 
CRACK. 
CONTACT THE 
BOEING 
COMPANY FOR 
REPAIR 
INSTRUCTIONS, 
AND DO THE 
REPAIR.

### Page 26

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-57-011 
 
Original Issue: August 21, 2020 AP757-57-011 
 Page 26 of 27 
Aviation Partners Boeing Proprietary 
This Appendix applies only to: Group 2. 
Logic diagrams are provided as an aid only. Information contained in Paragraph 1.E., Compliance is the primary 
source for compliance times. Information contained in Paragraph 3.B., Work Instructions is the primary source for 
tasks required for compliance. 
1. The table below gives the description for the parts and conditions called out in the logic diagrams. 
Title Description 
ACTION 1 DO A HFEC INSPECTION OF THE LOWER AFT WING SKIN, AFT EDGE AT FLAP 
TRACK NUMBER 2 (WBL 361) ATTACHMENT LOCATION FOR ANY CRACK 
ACTION 2 DO A HFEC INSPECTION OF THE LOWER AFT WING SKIN, AFT EDGE AT FLAP 
TRACK NUMBER 7 (WBL 361) ATTACHMENT LOCATION FOR ANY CRACK 
ACTION 3 DO A HFEC INSPECTION OF THE LOWER AFT WING SKIN, AFT EDGE AT FLAP 
TRACK NUMBER 1 (WBL 492) ATTACHMENT LOCATION FOR ANY CRACK 
ACTION 4 DO A HFEC INSPECTION OF THE LOWER AFT WING SKIN, AFT EDGE AT FLAP 
TRACK NUMBER 8 (WBL 492) ATTACHMENT LOCATION FOR ANY CRACK 
CONDITION 1 NO CRACK FOUND AT FLAP TRACK NUMBER 2 (WBL 361) ATTACHMENT 
LOCATION. 
CONDITION 2 ANY CRACK FOUND AT FLAP TRACK NUMBER 2 (WBL 361) ATTACHMENT 
LOCATION. 
CONDITION 3 NO CRACK FOUND AT FLAP TRACK NUMBER 7 (WBL 361) ATTACHMENT 
LOCATION. 
CONDITION 4 ANY CRACK FOUND AT FLAP TRACK NUMBER 7 (WBL 361) ATTACHMENT 
LOCATION. 
CONDITION 5 NO CRACK FOUND AT FLAP TRACK NUMBER 1 (WBL 492) ATTACHMENT 
LOCATION. 
CONDITION 6 ANY CRACK FOUND AT FLAP TRACK NUMBER 1 (WBL 492) ATTACHMENT 
LOCATION. 
CONDITION 7 NO CRACK FOUND AT FLAP TRACK NUMBER 8 (WBL 492) ATTACHMENT 
LOCATION. 
CONDITION 8 ANY CRACK FOUND AT FLAP TRACK NUMBER 8 (WBL 492) ATTACHMENT 
LOCATION. 
2. The table below gives the description for the flag notes called out in the logic diagram. 
Flag Note Letter Description 
(a) More than one CONDITION can be applicable to each airplane. 
 
APPENDIX C: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION OF THE LOWER AFT WING 
SKIN, AFT EDGE AT FLAP TRACK NUMBER 1, 2, 7, AND 8 ATTACHMENT LOCATIONS 
(SHEET 1 OF 2)

### Page 27

AVIATION PARTNERS BOEING SERVICE BULLETIN AP757-57-011 
 
Original Issue: August 21, 2020 AP757-57-011 
 Page 27 of 27 
Aviation Partners Boeing Proprietary 
 
APPENDIX C: HIGH FREQUENCY EDDY CURRENT (HFEC) INSPECTION OF THE LOWER AFT WING SKIN, AFT EDGE AT FLAP TRACK NUMBER 1, 2, 
7, AND 8 ATTACHMENT LOCATIONS (SHEET 2 OF 2) 
WHICHEVER OCCURS LATER 
 
WHICHEVER OCCURS LATER 
 
WHICHEVER OCCURS LATER 
 
THE COMPLIANCE TIMES GIVEN IN 1. AND 
2., WHICHEVER OCCURS FIRST: 
1. APPENDIX A, VALUE “X” FLIGHT HOURS 
2. APPENDIX A, VALUE “Y” FLIGHT CYCLES 
TFC = TOTAL FLIGHT CYCLES 
TFH = TOTAL FLIGHT HOURS 
WITHIN 2,700 FLIGHT CYCLES AFTER 
THE ORIGINAL ISSUE DATE OF THIS 
SERVICE BULLETIN 
ACTION 1 
CONDITION 1 
(a) 
 CONDITION 2 
(a) 
ACTION 2 
CONDITION 3 
(a) 
 CONDITION 4 
(a) 
ACTION 3 
CONDITION 5 
(a) 
 CONDITION 6 
(a) 
ACTION 4 
CONDITION 7 
(a) 
 CONDITION 8 
(a) 
NOT TO EXCEED 
6,000 FLIGHT 
CYCLES 
BEFORE FURTHER 
FLIGHT 
NOT TO EXCEED 
6,000 FLIGHT 
CYCLES 
BEFORE FURTHER 
FLIGHT 
NOT TO EXCEED 
20,000 FLIGHT 
CYCLES 
BEFORE FURTHER 
FLIGHT 
NOT TO EXCEED 
20,000 FLIGHT 
CYCLES 
BEFORE FURTHER 
FLIGHT 
REPEAT HFEC 
INSPECTION OF 
THE LOWER AFT 
WING SKIN, AFT 
EDGE, FLAP 
TRACK NUMBER 
2 ATTACHMENT 
FOR ANY 
CRACK. 
CONTACT THE 
BOEING 
COMPANY FOR 
REPAIR 
INSTRUCTIONS, 
AND DO THE 
REPAIR. 
 
REPEAT HFEC 
INSPECTION OF 
THE LOWER AFT 
WING SKIN, AFT 
EDGE, FLAP 
TRACK NUMBER 
7 ATTACHMENT 
FOR ANY 
CRACK. 
CONTACT THE 
BOEING 
COMPANY FOR 
REPAIR 
INSTRUCTIONS, 
AND DO THE 
REPAIR. 
 
REPEAT HFEC 
INSPECTION OF 
THE LOWER AFT 
WING SKIN, AFT 
EDGE, FLAP 
TRACK NUMBER 
1 ATTACHMENT 
FOR ANY 
CRACK. 
CONTACT THE 
BOEING 
COMPANY FOR 
REPAIR 
INSTRUCTIONS, 
AND DO THE 
REPAIR. 
 
REPEAT HFEC 
INSPECTION OF 
THE LOWER AFT 
WING SKIN, AFT 
EDGE, FLAP 
TRACK NUMBER 
8 ATTACHMENT 
FOR ANY 
CRACK. 
CONTACT THE 
BOEING 
COMPANY FOR 
REPAIR 
INSTRUCTIONS, 
AND DO THE 
REPAIR. 
 
WHICHEVER OCCURS LATER 
 
WHICHEVER OCCURS LATER 
 
WHICHEVER OCCURS LATER 
 
THE COMPLIANCE TIMES GIVEN IN 1. 
AND 2., WHICHEVER OCCURS FIRST: 
1. 81,000 TFH 
2. 34,000 TFC 
TFC = TOTAL FLIGHT CYCLES 
TFH = TOTAL FLIGHT HOURS 
WITHIN 2,700 FLIGHT CYCLES AFTER THE 
ORIGINAL ISSUE DATE OF THIS SERVICE 
BULLETIN

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
