# Aviation Partners Boeing Service Bulletin AP767-57-013

Copy: Revision 1 ("AP767-57-013 Rev 1"), 31 pages: PDF https://openairdocs.org/files/sha256/cc/3a/cc3af8703e1f01343875aea2cc2e29cd85fcc8ed235d3b7eb02d29127851c40b; text https://openairdocs.org/service-documents/aviation-partners-boeing/ap767-57-013/file/cc3af8703e1f.md. Rights: © Aviation Partners Boeing. Filed by the FAA in regulations.gov docket FAA-2018-0073; AD 2018-13-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Aviation Partners Boeing](https://openairdocs.org/service-documents/aviation-partners-boeing.md)
- Type: Service bulletin (Service Bulletin)
- Number: AP767-57-013
- Latest revision known: AP767-57-013, Revision 1, dated April 11, 2017 (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/aviation-partners-boeing/ap767-57-013

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2018-13-06](https://openairdocs.org/ad/2018-13-06.md), effective Aug 22, 2018: Revision 1
- [AD 2018-11-14](https://openairdocs.org/ad/2018-11-14.md), effective Jul 10, 2018: Revision 1

Also cited in [1 proposed AD](https://openairdocs.org/service-documents/aviation-partners-boeing/ap767-57-013/proposed.md).

## Text (31 pages)

Rights: © Aviation Partners Boeing. Filed by the FAA in regulations.gov docket FAA-2018-0073; AD 2018-13-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

AVIATION PARTNERS BOEING SERVICE BULLETIN 
2811 S 102nd Street, Suite 200 
Seattle, WA 98168 
(206) 830-7699 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page i 
Aviation Partners Boeing Proprietary 
NUMBER: AP767-57-013 Revision Transmittal Sheet 
Validation 
Issue: November 30, 2016  
Revision 1 April 11, 2017  
ATA SYSTEM: 5720   
SUBJECT: WINGS - Lower Skin at Inboard Segment of Stringer L-9.5 between Wing Station 879.2 
and Wing Station 990.2 - Inspection and Repair 
This Revision includes all pages of the service bulletin. 
COMPLIANCE INFORMATION RELATED TO THIS REVISION 
Effects of this Revision on airplanes on which Validation Issue was previously done: 
Group Condition Action 
2 - No more work is necessary for PART1 and 2. Do HFEC 
inspections in accordance with Paragraph 1.E., Compliance 
and Paragraph 3.B., PART 3 of this revision. 
REASON FOR REVISION  
This revision is sent to make changes to refer to the latest revision of the drawing 767-9420, to add an instruction 
about repair, and to change the inspection area after repair. 
IN THIS REVISION: 
 Group 2 for the validation airplane is added. 
 Reference to the drawing 767-9420 has been changed to the latest revision. 
 An instruction about repairs is added. 
 The word "terminating" is removed. 
 The inspection area after repair is changed. 
These sections were changed: 
 Paragraph 1.A.1: Added APB kit ID for group 1 
Added group 2 for 767-300 airplane line number 795 (VS273). 
 Paragraph 1.D: Changed "terminating action" to "repair action". (2 locations)  
 Paragraph 1.E: Changed "Repair/Terminating Action" to "Repair Action". (2 locations) 
Changed "Group1" to "Group 1 and 2" 
 Paragraph 1.H: Changed "Repair/Terminating Action" to "Repair Action" 
 Paragraph 1.K.2 Drawing 767-9420 Sheet 1: Changed "Revision -" to "Revision B". 
 Paragraph 2B.1: Changed "Group1" to "Group 1 and 2" 
 Paragraph 2D: Changed "Group1" to "Group 1 and 2"

### Page 2

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page ii 
Aviation Partners Boeing Proprietary 
 Paragraph 3.B: Changed "Repair/Terminating Action" to "Repair Action". (3 locations)  
 Paragraph 3.B PART 2: Added Step 5. "RC - Do the repairs as necessary in accordance with drawing 
767-9420, Sheet 1." 
 Paragraph 3.B PART 3 Step 1: Changed "FIGURE 2" to "FIGURE 3". 
 FIGURE 2: Added “Part 1” to sheets 1-4 
 Added FIGURE 3.

### Page 3

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page iii 
Aviation Partners Boeing Proprietary 
APB DOCUMENT FEEDBACK FORM 
To provide feedback on this document to APB for corrections or improvements, please complete the form below 
and fax or email to the attention of APB Liaison Engineering at: 
Fax: +1 (206) 767-0535 
Email: leng@aviationpartners.com 
Airline Name: ______________________________________________ 
Contact Name: ______________________________________________ 
Phone Number: ______________________________________________ 
Email Address: ______________________________________________ 
Airplane Model-Type: ______________________________________________ 
Document Number: ______________________________________________ 
Document Revision: ______________________________________________ 
Document Title: ______________________________________________ 
Chapter-Section-
Subject: ______________________________________________ 
Page: ______________________________________________ 
Page Date: ______________________________________________ 
Description of Change: 
(Include additional 
sheets as required) 
 
 
 
 
 
 
 
 
 
 
 
 
 
Attachments: ______________________________________________

### Page 4

AVIATION PARTNERS BOEING SERVICE BULLETIN 
2811 S 102nd Street, Suite 200 
Seattle, WA 98168 
(206) 830-7699 
 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 1 of 28 
 
NUMBER: AP767-57-013  
Validation 
Issue: November 30, 2016  
Revision 1 April 11, 2017  
ATA SYSTEM: 5720 
SUBJECT: WINGS - Lower Skin at Inboard Segment of Stringer L-9.5 between Wing Station 879.2 and 
Wing Station 990.2- Inspection and Repair 
 
PROPRIETARY NOTICE 
 
The data contained hereon and herein is proprietary to Aviation Partners Boeing. Neither this data nor th e data 
contained herein shall be reproduced, used or disclosed to others without the written authorization of Aviation 
Partners Boeing. 
 
EXPORT CONTROLLED TECHNOLOGY 
 
This document contains information about a technology controlled by the Export Administration Regulations (EAR) 
(15 CFR 730-774). It has been classified under Export Control Classification Number (ECCN) 9E991 and may not 
be exported to certain countries without a license. Providing this information to a foreign national - inside or outside 
the United States - can constitute a prohibited export. Each person handling this document has a legal responsibility 
to comply with all applicable EAR requirements and should consult with an Export Control Officer before providing 
it to any foreign national.

### Page 5

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 2 of 28 
Aviation Partners Boeing Proprietary 
Table of Contents 
 
1. PLANNING INFORMATION .......................................................................................................................4 
A. Effectivity ....................................................................................................................................................4 
1. Airplanes .....................................................................................................................................................4 
2. Spares Affected ..........................................................................................................................................4 
B. Concurrent Requirements...........................................................................................................................4 
C. Reason........................................................................................................................................................4 
D. Description ..................................................................................................................................................4 
E. Compliance .................................................................................................................................................6 
F. Approval ......................................................................................................................................................8 
G. Warranty Information ..................................................................................................................................8 
H. Manpower ...................................................................................................................................................8 
I. Weight and Balance Changes ....................................................................................................................9 
J. Electrical Load Data ....................................................................................................................................9 
K. References .................................................................................................................................................9 
1. Existing Data: ..............................................................................................................................................9 
2. Data Supplied with This Service Bulletin: ...................................................................................................9 
3. Installation Drawings Used in the Preparation of This Service Bulletin: .................................................. 10 
L. Other Publications Affected ..................................................................................................................... 10 
1. Publications ............................................................................................................................................. 10 
2. Damage Tolerance Based Structural Inspections: .................................................................................. 10 
M. Interchangeability and Intermixability of Parts ......................................................................................... 10 
N. Software Accomplishment Summary ....................................................................................................... 10 
2. MATERIAL INFORMATION..................................................................................................................... 11 
A. Material - Price and Availability ............................................................................................................... 11 
B. Parts Necessary for Each Airplane .......................................................................................................... 11 
1. Kits/Parts ................................................................................................................................................. 11 
2. Parts and Materials Supplied by the Operator: ....................................................................................... 11 
C. Parts Necessary to Change Spares ........................................................................................................ 11 
D. Existing Parts Accountability ................................................................................................................... 11 
E. Special Tooling - Price and Availability .................................................................................................... 12 
F. Special Tooling Necessary to Do This Service Bulletin ........................................................................... 12 
3. ACCOMPLISHMENT INSTRUCTIONS ................................................................................................... 13 
A. General Notes .......................................................................................................................................... 13 
B. Work Instructions ..................................................................................................................................... 14 
PART 1: HFEC INSPECTION OF LOWER WING SKIN EXTERNAL SURFACE – INBOARD SEGMENT OF 
STRINGER L-9.5 ................................................................................................................................ 14 
PART 2: REPAIR ACTION – PREVENTIVE MODIFICATION – INBOARD SEGMENT OF STRINGER L-9.5
 ............................................................................................................................................................ 15 
PART 3: HFEC INSPECTION OF LOWER WING SKIN EXTERNAL SURFACE – INBOARD SEGMENT OF 
STRINGER L-9.5 AFTER REPAIR. ................................................................................................... 16

### Page 6

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 3 of 28 
Aviation Partners Boeing Proprietary 
Table of Contents (continued) 
FIGURE 1: WING LOWER SURFACE .................................................................................................................... 17 
FIGURE 2: OUTBOARD WING AT INBOARD SEGMENT OF STRINGER L-9.5 - HIGH FREQUENCY EDDY 
CURRENT (HFEC) SURFACE INSPECTION ..................................................................................... 18 
FIGURE 3: OUTBOARD WING AT INBOARD SEGMENT OF STRINGER L -9.5 - HIGH FREQUENCY EDDY 
CURRENT (HFEC) SURFACE INSPECTION AFTER REPAIR.......................................................... 22 
APPENDIX A: REPORTING INSTRUCTIONS: ...................................................................................................... 26

### Page 7

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 4 of 28 
Aviation Partners Boeing Proprietary 
1. PLANNING INFORMATION 
A. Effectivity 
1. Airplanes 
This service bulletin is applicable to 767-300/-300F/-300BCF Airplanes with blended winglets (Refer 
to STC ST01920SE). An equivalent change is on subsequent production airplanes.  
767-300BCF refers to the 767-300 model modified by Boeing to a freighter configuration. 
GROUP CONFIGURATION DESCRIPTION 
1 - Airplanes with APB blended winglet kit: 767-3000-1 thru -221 The group does not include airplane line number 795 (VS273) 
2 - 767-300 airplane line number 795 (VS273) 
2. Spares Affected 
None 
B. Concurrent Requirements 
None 
C. Reason 
This service bulletin gives instructions to inspect the lower wing skin to find skin crack(s) and repair the 
crack(s). This service bulletin also gives modification that will help prevent future cracks from occurring in 
the wing lower skin common to the inboard segment of the stringer L-9.5 between Rib No. 27 and Rib No. 
31. 
If not corrected, fatigue cracking of the lower wing skin common to the inboard segment of the stringer 
L-9.5 could grow undetected and result in a loss of the structural integrity of the wing.  
Fatigue cracks have been found in the lower wing skin at the farthest outboard fastener of the inboard 
segment of the stringer L-9.5 between Rib No. 30 (WSTA 962.2) and Rib No. 31 (WSTA 990.2) on two 
passenger (767-300) airplanes with winglets installed. The cracks were found at the fastener holes 
common to the stringer on the left- and right-hand wings.  
APB analysis has determined the cracks to be a result of fatigue due to higher -than-predicted fastener 
loads and skin stress peaking at the outboard end of the inboard segment of the stringer L-9.5. 
Fatigue cracks have been found in three areas in the lower wing skin where wing structure was changed 
during the APB Winglet installation. At each location, the cracks were found at the fastener holes in the 
wing skin common to the new stringers on the left- and right-hand wings.  
The first location to report cracks was in the wing skin adjacent to new stringer L-9.5 in the surge tank 
between WSTA 990 (Rib 31) and WSTA 1018 (Rib 32). APB service bulletin AP767-57-010 gives work 
instructions related to this location  
The second location to report cracks was in the wing skin adjacent to the new stringer L-6.5 in the surge 
tank between WSTA 990 (Rib 31) and WSTA 1018 (Rib 32). APB service bulletin AP767-57-014 gives 
work instructions related to this location.  
The third location to report cracks was in the wing skin adjacent to the new stringer L-9.5 inside the main 
tank between WSTA 962 (Rib 30) and WSTA 990 (Rib 31). This Service Bulletin (AP767-57-013) gives 
work instructions related to this location. See FIGURE 1 for the areas of work for this service bulletin and 
the related service bulletins. 
D. Description 
NOTE: Because of common access and common requirement to defuel and purge the fuel tanks for the 
modifications, it is easier to do the changes in other related service bulletins while the fuel tanks

### Page 8

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 5 of 28 
Aviation Partners Boeing Proprietary 
are open for access. APB recommends that operators examine service bulletins AP767-57-010, 
AP767-57-013, and AP767-57-014 and do all repair action modifications at the same time.  
This service bulletin gives instructions to do one of the following. 
• A repetitive high frequency eddy current (HFEC) inspection of the lower outboard skin external 
surface at the inboard and outboard ends of the inboard segment of stringer L-9.5 to find crack(s),  
OR  
• A repair action to remove the inboard segment of stringer L-9.5 detail part and associated hardware, 
do an HFEC inspection of fastener holes, and install a new the inboard segment of stringer L-9.5. 
This service bulletin also gives instructions to repair the crack(s). 
The work in this service bulletin is done in the maintenance zone(s) given below.  
Affected Maintenance Zones 
Model Zone 
767-300, 767-300F, 767-300BCF 541, 641

### Page 9

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 6 of 28 
Aviation Partners Boeing Proprietary 
E. Compliance 
The FAA will possibly release an Airworthiness Directive related to this service bulletin. The Airworthiness 
Directive will make the compliance tasks and times given in this service bulletin mandatory.  
Group 1 and 2: 
Condition Action Compliance Time  
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
All airplanes Do PART 1: HFEC 
Inspection of Lower 
Wing Skin external 
surface – Inboard 
Segment of Stringer 
L-9.5 
Within 1,500 flight cycles 
since the installation of 
the winglets 
OR 
Within 7,500 flight hours 
since the installation of 
the winglets, 
whichever occurs first. 
18 months 
after the initial 
issue date of 
this service 
bulletin 
 
Condition 1: 
No crack 
found 
Option 
1: 
Do PART 1: HFEC 
Inspection of Lower 
Wing Skin external 
surface – Inboard 
Segment of Stringer 
L-9.5 
- 1,500 flight cycles 
OR 
7,500 flight hours, 
whichever occurs 
first. 
Option 
2: 
Do PART 2: Repair 
Action - Preventive 
Modification - Inboard 
Segment of Stringer 
L-9.5. 
Before further flight  
Do PART 3: HFEC 
Inspection of Lower 
Wing Skin external 
surface – Inboard 
Segment of Stringer 
L-9.5 after repair 
Before 25,000 
total flight cycles 
OR 
Before 90,000 
total flight hours, 
whichever occurs 
first. 
Within 6,000 flight 
cycles since the PART 
2 repair 
OR 
Within 18,000 flight 
hours since the PART 
2 repair, 
whichever occurs first. 
6,000 flight cycles 
OR 
18,000 flight 
hours, 
whichever occurs 
first.

### Page 10

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 7 of 28 
Aviation Partners Boeing Proprietary 
Group 1 and 2: 
Condition Action Compliance Time  
(Whichever Occurs Later) 
Repeat Interval 
(Not to Exceed) 
Condition 2:  
Any crack found 
Do PART 2: Repair 
Action - Preventive 
Modification - Inboard 
Segment of Stringer 
L-9.5. 
Before further flight  
Do PART 3: HFEC 
Inspection of Lower 
Wing Skin external 
surface – Inboard 
Segment of Stringer 
L-9.5 after repair 
Before 25,000 
total flight cycles 
OR 
Before 90,000 
total flight hours, 
whichever 
occurs first. 
Within 6,000 flight 
cycles since the PART 
2 repair 
OR 
Within 18,000 flight 
hours since the PART 2 
repair, 
whichever occurs first. 
6,000 flight cycles 
OR 
18,000 flight 
hours, 
whichever occurs 
first.

### Page 11

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 8 of 28 
Aviation Partners Boeing Proprietary 
F. Approval 
This service bulletin was examined by the Federal Aviation Administration (FAA). The changes specified 
in this service bulletin comply with the applicable regulations and are FAA approved, as well as European 
Aviation Safety Agency (EASA)/Joint Aviation Authorities (JAA) approved for all EASA/JAA approved 
airplanes listed in the service bulletin effectivity. This service bulletin and its approval were based on the 
airplane in its original Boeing delivery configuration or as modified by other approved Boeing changes.  
If an airplane has a non-Boeing modification or repair that affects a component or system also affected by 
this service bulletin, the operator is responsible for obtaining appropriate regulatory agency approval 
before incorporating this service bulletin. 
The changes given in this Service Bulletin are in compliance with the Airworthiness Limitation 28 -AWL-08 
as mandated by AD 2008-11-01 R1. This service bulletin has been reviewed by the FAA Oversight Office 
for fuel tank ignition prevention requirements and was found that the repair and modification maintain an 
acceptable level of safety.  No further approval from the FAA Oversight Office is required to satisfy the 
requirements of Boeing 767 MPD D622T001 CDCCL 28-AWL-08 provided the repair and modification are 
accomplished in accordance with the instructions in this service bulletin. 
G. Warranty Information 
APB warranty reimbursement of labor and material costs is available for affected airplanes. Please refer 
to Paragraphs 1.H and 2.A.  
H. Manpower 
The table below shows an estimate of the task hours necessary to do this inspection for each airplane. 
This estimate is for direct labor only, done by an experienced crew. Adjust the estimate with operator task 
hour data if necessary. The estimate does not include lost time. These are some examples of lost time:  
• Time to adjust to the workplace 
• Time to schedule the work 
• Time to inspect the work 
• Time to cure the materials 
• Time to make the parts 
• Time to find the tools. 
APB will reimburse labor costs for Parts defined in Tables below, based on the actual work performed. 
Total reimbursement will not exceed the sum of hours from the applicable tables below. The labor rate will 
be in accordance with the APB Winglet Sales agreement for the affected airplanes, if specified. If not 
otherwise specified, the labor rate will be the reported actual rate if it is fair and reasonable.  
Submit claims to APB Warranty (apbwarranty@aviationpartners.com) with supporting data, including 
airplanes line number, work instruction Parts accomplished, total labor hours, labor rate, and total dollar 
amount per airplane. 
PART 1: HFEC INSPECTION OF LOWER WING SKIN EXTERNAL SURFACE – INBOARD SEGMENT OF 
STRINGER L-9.5 
Task Number of Persons Man-Hours Elapsed Time 
(Hours) 
Inspection 2 1 0.5 
TOTAL FOR EACH AIRPLANE 1 0.5

### Page 12

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 9 of 28 
Aviation Partners Boeing Proprietary 
PART 2: REPAIR ACTION – PREVENTIVE MODIFICATION – INBOARD SEGMENT OF STRINGER L-9.5  
Task Number of 
Persons 
Man-Hours Elapsed Time 
(Hours) 
Preventive Modification - 
Inboard Segment of 
Stringer L-9.5 
2 50 25 
TOTAL FOR EACH AIRPLANE 50 25 
I. Weight and Balance Changes 
Airplane Change in Weight (Pounds) Change in Moment (Pound-Inch) More Data 
767-300/-300F/-300BCF 
Part 2 Modification -10.7 -13,130 (a) 
(a) These numbers are based on the change done on both the left and right wings.  
J. Electrical Load Data 
None 
K. References 
1. Existing Data: 
a. APB Service Bulletin AP767-57-010 and AP767-57-014 
b. D633T(xxx) Boeing 767-300 Aircraft Maintenance Manual (AMM).(xxx) Refers to customer 
specific code, 12-11-01, 24-22-00, 28-11-00, 28-11-03, 28-26-00, 51-21-10. 
c. D634T210 Boeing 767-300 Structural Repair Manual (SRM), Chapter 51,  
51-10-02, 51-20-07, 51-40-02, 51-40-03, 51-40-04, 51-40-05, 51-40-08. 
d. D634T215 Boeing 767-300F SRM, Chapter 51, 51-10-02, 51-20-07, 51-40-02,  
51-40-03, 51-40-04, 51-40-05, 51-40-08. 
e. D634T235 Boeing 767-300BCF SRM, Chapter 51, 51-10-02, 51-20-07, 51-40-02,  
51-40-03, 51-40-04, 51-40-05, 51-40-08. 
f. D634T301 Boeing 767 Nondestructive Test Manual Part 6, 51-00-01, 51-00-19. 
g. Boeing Standard Overhaul Practice Manual (SOPM), 20-30-03, 20-43-03, 20-44-04, 20-50-19, 
20-50-20. 
h. AP67.3-0600 APB 767 Aircraft Maintenance Manual (AMM) Supplement, 28-11-00 
2. Data Supplied with This Service Bulletin: 
Drawing Number Title Sheet  Revision 
767-9420 Top Kit - Fatigue Life Improvement Kit, Lower Wing 
Skin, Stringer L-9.5, Inbd 
1 B

### Page 13

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 10 of 28 
Aviation Partners Boeing Proprietary 
3. Installation Drawings Used in the Preparation of This Service Bulletin: 
Drawing Number Title 
767-3420 Instl - Stringer, L9.5 
 
This drawing was used to prepare this service bulletin. This drawing is not necessary to make the 
specified changes, and is not supplied with this service bulletin. This drawing may no t be applicable 
to all airplane configurations or operators. 
L. Other Publications Affected 
1. Publications 
Publication Chapter / Section 
AP67.3-0603-APB, Weight and Balance Control and Loading  1-86-001 
AP67.3-0604.2-01, Section 9 - Airworthiness Limitations, 
767-300, -300F and -300BCF 
B. Airworthiness Limitations – 
Structural Inspections 
AP67.3-0604.2-DTR - Damage Tolerance Rating Check 
Form Supplement, 767-300, -300F and -300BCF 
DTR Check Forms 57-20-33 
and 57-20-33B 
AP67.3-0802, Instructions for Continued Airworthiness All, updated format 
NOTE: * See paragraph 1.L.2 for the structural inspection affected by this service bulletin.  
2. Damage Tolerance Based Structural Inspections: 
APB has evaluated the repairs and/or changes in this service bulletin for effects on Fatigue Critical 
Structure (FCS) and for changes to Damage Tolerance Inspections (DTI) required in the Maintenance 
Program. This service bulletin affects FCS and changes to DTI were necessary. The changes to DTI 
have been incorporated into the Maintenance Planning Data Supplement, AP67.3 -0604.2 Revision 
September 2016. 
M. Interchangeability and Intermixability of Parts 
See paragraph 2.D. Existing Parts Accountability. 
N. Software Accomplishment Summary 
None

### Page 14

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 11 of 28 
Aviation Partners Boeing Proprietary 
2. MATERIAL INFORMATION 
A. Material - Price and Availability 
The kit shown in paragraph 2.B should be ordered from Aviation Partners Boeing. Kits for affected 
airplanes will be supplied at no charge in response to a no-cost purchase order to APB AOG/Spares 
(aogspares@aviationpartners.com). 
B. Parts Necessary for Each Airplane 
1. Kits/Parts 
Group 1 and 2 
767-9420-1 Top Kit - Fatigue Life Improvement Kit, Lower Wing Skin, Stringer L-9.5, Inbd 
See 767-9420 Sheet 1 for the parts list. 
2. Parts and Materials Supplied by the Operator: 
Material Description QTY per Wing QTY per SS 
BMS10-20 Type II Primer * * 
BMS10-79 Type II Primer * * 
BMS5-45 Class A, B, and C Sealant * * 
Alodine 600 Alodine * * 
BMS 10-60, Type II, Color 
BAC 707 Gray or the 
operator’s normal decorative 
exterior paint system 
Topcoat * * 
* Quantity as required. 
C. Parts Necessary to Change Spares 
None 
D. Existing Parts Accountability 
The parts shown below are changed as shown in this service bulletin. Quantity is the number of parts 
changed on each airplane. 
Group 1 and 2 
Existing Part 
Number 
RUC Name QTY New Part Number PNC RPC 
767-3531-5 DIS Stringer 1 - - B 
767-3531-6 DIS Stringer 1 - - B 
767-3531-9 DIS Stringer 2 767-3421-9 S A 
767-3531-10 DIS Stringer 2 767-3421-11 S A 
767-3533-1 DIS Stringer 4 - - B 
RUC Recommended Use Code 
DIS - Discard the part.

### Page 15

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 12 of 28 
Aviation Partners Boeing Proprietary 
PNC Part Number Code 
S - This is the part number for the new replacement part. 
 - To get a new part, use this part number in your order. 
RPC Replacement Code 
A - Do not use the existing part to replace the changed part. 
B - This part is removed from the airplane. This part has no replacement.  
E. Special Tooling - Price and Availability 
No special tooling is required to do repairs. 
F. Special Tooling Necessary to Do This Service Bulletin 
Maintenance and overhaul tools as specified in the maintenance manuals may be necessary. Examine 
operator tool supply before starting work to make sure all necessary tools are available.

### Page 16

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 13 of 28 
Aviation Partners Boeing Proprietary 
3. ACCOMPLISHMENT INSTRUCTIONS 
A. General Notes 
WARNING:  IF ELECTRICAL POWER IS APPLIED TO THE AIRPLANE, MAKE SURE YOU OBEY ALL 
PRECAUTIONS WHILE YOU DO WORK. IF YOU DO NOT OBEY THE PRECAUTIONS, 
DEATH OR INJURY TO PERSONS, AND DAMAGE TO THE AIRPLANE CAN OCCUR.  
WARNING:  CAREFULLY DO ALL OF THE SAFETY PROCEDURES IN THE PURGING AND ENTRY 
PROCEDURE OF THE FUEL TANK. INJURY TO PERSONS AND DAMAGE TO 
EQUIPMENT CAN OCCUR. 
CAUTION:  KEEP THE WORK AREA, WIRES AND ELECTRICAL BUNDLES CLEAN OF METAL 
PARTICLES OR CONTAMINATION WHEN YOU USE TOOLS. UNWANTED MATERIAL, 
METAL PARTICLES, OR CONTAMINATION CAUGHT IN WIRE BUNDLES CAN CAUSE 
DAMAGE TO THE BUNDLES. DAMAGED WIRE BUNDLES CAN CAUSE SPARKS OR 
OTHER ELECTRICAL DAMAGE. 
CAUTION:  ELECTRICALLY GROUND THE AIRPLANE. THIS WILL HELP TO PREVENT DAMAGE TO 
THE AIRPLANE OR EQUIPMENT. 
NOTE: 1. Obey all warnings and cautions given in the applicable sections of the Aircraft Maintenance 
Manual (AMM). 
2. Do functional tests and adjustments prior to returning the aircraft to service.  
3. Unless shown differently, these dimensions and tolerances are used: 
- Linear dimensions are in inches. 
- Tolerance on linear dimensions, other than rivet and bolt edge margins, is plus or minus 
0.03 inch. 
- Tolerance on rivet and bolt edge margin is plus or minus 0.05 inch. 
- Angular tolerance is plus or minus 2 degrees. 
- Hole dimensions for standard solid rivets are given in the 767 Structural Repair Manual 
(SRM), 51-40-05. 
- Torque limits to tighten nut and bolts are given in the 767 SRM, 51-40-04. 
4. Make an entry into aircraft maintenance records once service bulletin is completed.  
5. For countersinking, refer to the 767 SRM, 51-40-08. 
6. For approved material and process substitutions, refer to the 767 SRM, Chapter 51 or Boeing 
drawing 012W6100. 
7. If the length of any fastener specified in this service bulletin does not meet the installation  
standards in 767 SRM, Chapter 51, then a fastener of the same specification with a length 
which meets the installation standards in the 767 SRM, Chapter 51 may be used.  
8. These work instructions refer to procedures included in other Boeing documents. When t he 
words “refer to” are used and the operator has an accepted alternative procedure, the 
accepted alternative procedure can be used. When the words “in accordance with” are 
included in the instruction, the procedure in the document must be used. 
9. If it is necessary to remove more parts for access, you can remove those parts. If you can get 
access without removing identified parts, it is not necessary to remove all of the identified 
parts. Jacking and shoring limitations must be obeyed. 
10. Use of colors in Figures is based on guidance from the ATA e-Business Program (ATA) 
S1000D.

### Page 17

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 14 of 28 
Aviation Partners Boeing Proprietary 
11. When more than one OPTION is given for a CONDITION, do only one of the OPTION 
numbers. When more than one ACTION is given for a CONDITION number or an OPTION 
number, do all of the ACTION numbers for that CONDITION number or OPTION number. 
12. Some steps in the Work Instructions are labeled as Required for Compliance (RC). If this 
service bulletin is mandated by an airworthiness directive (AD), then the steps labeled RC, 
including sub-steps under an RC step and any figures identified in an RC step, must be done 
to comply with the AD. An Alternative Method of Compliance (AMOC) is required for any 
deviations to RC steps, including sub-steps and identified figures. Steps not labeled as RC 
may be deviated from using accepted methods in accordance with the operator’s 
maintenance or inspection program without getting approval of an AMOC. This is provided 
that the RC steps, including sub-steps and identified figures, can still be done as specified, 
and the airplane can be put back in an airworthy condition. 
13. The compliance times for the actions in Paragraph 3.B., WORK INSTRUCTIONS are in 
Paragraph 1.E., Compliance. 
B. Work Instructions 
PART 1: HFEC INSPECTION OF LOWER WING SKIN EXTERNAL SURFACE – INBOARD SEGMENT 
OF STRINGER L-9.5 
NOTE: Aviation Partners Boeing requests the operators to report the results of inspection to Aviation 
Partners Boeing. See Appendix A for recommended format for crack finding reports. 
1. RC - Do a high frequency eddy current (HFEC) surface inspection of the lower wing skin to detect 
crack(s) in accordance with FIGURE 2. 
a. Condition 1 – If no crack is found, 
Do one of the following.  
(1) Condition 1, Option 1 –  
Repeat PART 1: HFEC Inspection of Lower Wing Skin External Surface – Inboard 
Segment of Stringer L-9.5 
- OR - 
(2) Condition 1, Option 2 –  
Do PART 2: Repair Action – Preventive Modification – Inboard Segment of Stringer L-9.5 
b. Condition 2 – If any crack is found,  
(1) Do PART 2: Repair Action – Preventive Modification – Inboard Segment of Stringer L-9.5

### Page 18

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 15 of 28 
Aviation Partners Boeing Proprietary 
PART 2: REPAIR ACTION – PREVENTIVE MODIFICATION – INBOARD SEGMENT OF STRINGER L-
9.5 
1. Purge fuel tanks and prepare main tanks for entry. Refer to the 767 AMM, 28-11-00 as an 
accepted procedure. 
2. Remove electrical power from the airplane. Refer to the 767 AMM, 24-22-00 as an accepted 
procedure. 
3. Remove and keep the following access panels. Refer to the 767 AMM, 28-11-01 as an accepted 
procedure. 
• Left Wing 541UB, 541VB, 541WB, and 541XB 
• Right Wing 641UB, 641VB, 641WB, and 641XB 
4. RC - Remove and discard existing stringers 767-3531-5 (LH)/-6 (RH), 767-3531-9, 767-3531-10, 
and 767-3533-1 and related fasteners and shims in accordance with drawing 767-9420, Sheet 1. 
5. RC - Do the repairs as necessary in accordance with drawing 767-9420, Sheet 1. 
6. RC - Install new stringers 767-3421-9 and 767-3421-11 in accordance with drawing 767-9420, 
Sheet 1. 
7. Do the fuel leak detection procedures to make sure that fuel tank sealant is applied correctly, and 
repair any leak found. Refer to the 767 AMM, 28-11-00 Task 28-11-00-796-111 or APB AMM 
Supplement AP67.3-0600, Section 28-11-00/601, and Task 28-11-00-796-901 as an accepted 
procedure. 
8. Do fuel tank cleaning, inspection, and closure tasks. Refer to the 767 AMM, 28-11-00, Task 28-
11-00-582-342 as an accepted procedure. 
9. Install tank access doors, Left Wing 541UB, 541VB, 541WB and 541XB and Right Wing 641UB, 
641VB, 641WB and 641XB. Refer to the 767 AMM, 28-11-01 as an accepted procedure. 
10. Apply topcoat BMS 10-60, Type II, Color BAC 707 Gray or the operator’s normal decorative 
exterior paint system to external bare surfaces. Refer to the 767 AMM 51-21-10 as an accepted 
procedure. 
11. Supply electrical power to the airplane. Refer to the 767 AMM, 24-22-00 as an accepted 
procedure. 
12. Refuel the left and right main fuel tanks. Refer to the 767 AMM, 12-11-01 as an accepted 
procedure. 
13. Put the airplane back to a serviceable condition.

### Page 19

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 16 of 28 
Aviation Partners Boeing Proprietary 
PART 3: HFEC INSPECTION OF LOWER WING SKIN EXTERNAL SURFACE – INBOARD SEGMENT 
OF STRINGER L-9.5 AFTER REPAIR. 
NOTE: Aviation Partners Boeing requests the operators to report the results of inspection to Aviation 
Partners Boeing. See Appendix A for recommended format for crack finding reports. 
1. RC - Do a high frequency eddy current (HFEC) surface inspection of the lower wing skin to detect 
crack(s) in accordance with FIGURE 3. 
a. Condition 1 – If no crack is found, 
Repeat PART 3: HFEC Inspection of Lower Wing Skin External Surface – Inboard Segment 
of Stringer L-9.5 after repair. 
b. Condition 2 – If any crack is found,  
Contact The Boeing Company for repair instructions and do the repair as instructed by 
Boeing.

### Page 20

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 17 of 28 
Aviation Partners Boeing Proprietary 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Left side shown, right side opposite 
 
FIGURE 1: WING LOWER SURFACE 
  
541XB 
641XB 
 541UB 
641UB 
541WB 
641WB 
RIB 32 
RIB 33 
RIB 31 
(Tank 
End Rib) 
RIB 30 
 RIB 29 
RIB 27 
RIB 28 
WSTA 
1046.2 
WSTA 
990.2 
WSTA 
962.2 
WSTA 
934.2 
541VB 
641VB 
 
Stringer L-9.5 Inbd 
This Service Bulletin 
Stringer L-6.5 
Refer to SB AP767-57-014 
Stringer L-9.5 Outbd 
Refer to SB AP767-57-010 
WSTA 
1018.2 
WSTA 
906.2 
WSTA 
879.2 
Front Spar 
Rear Spar 
INBD 
FWD 
View Looking 
Down

### Page 21

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 18 of 28 
Aviation Partners Boeing Proprietary 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
FIGURE 2: PART 1 - OUTBOARD WING AT INBOARD SEGMENT OF STRINGER L-9.5 - HIGH FREQUENCY 
EDDY CURRENT (HFEC) SURFACE INSPECTION 
(SHEET 1 OF 4) 
  
WING LOWER SKIN 
AT STRINGER L-9.5

### Page 22

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 19 of 28 
Aviation Partners Boeing Proprietary 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Left side shown, right side opposite 
 
 
FIGURE 2: PART 1 - OUTBOARD WING AT INBOARD SEGMENT OF STRINGER L-9.5 - HIGH FREQUENCY 
EDDY CURRENT (HFEC) SURFACE INSPECTION 
 (SHEET 2 OF 4)  
A 
RIB 32 
WSTA 
1018.2 
RIB 28 
WSTA 
906.2 
RIB 30 
WSTA 
962.2 
INBD SEGMENT OF 
WING STRINGER  
L-9.5 
B 
INBD 
FWD 
View Looking Up

### Page 23

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 20 of 28 
Aviation Partners Boeing Proprietary 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Left side shown, right side opposite 
 
 
FIGURE 2: PART 1 - OUTBOARD WING AT INBOARD SEGMENT OF STRINGER L-9.5 - HIGH FREQUENCY 
EDDY CURRENT (HFEC) SURFACE INSPECTION 
 (SHEET 3 OF 4)  
1 
WING STRINGER L-9.5 
WING STRINGER L-10 
RIB 30 
WSTA 
962.2 
INBD 
FWD 
View Looking Up 
A

### Page 24

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 21 of 28 
Aviation Partners Boeing Proprietary 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Left side shown, right side opposite 
The step numbers shown below agree with the numbers shown in the circle symbols in the figure.  
Step Task Name Identification Qty More Data 
1 Inspect Wing Skin around Fastener - 10 (a) 
(a)  Do HFEC surface inspection to detect cracks. Refer to 767 NDT Manual D634T301, Part 6, 
Subject 51-00-01 or 51-00-19 as an accepted procedure.  
 
FIGURE 2: PART 1 - OUTBOARD WING AT INBOARD SEGMENT OF STRINGER L-9.5 - HIGH FREQUENCY 
EDDY CURRENT (HFEC) SURFACE INSPECTION 
 (SHEET 4 OF 4)  
1 
WING STRINGER L-9.5 
WING STRINGER L-10 
RIB 28 
WSTA 
906.2 
INBD 
FWD 
View Looking Up 
B

### Page 25

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 22 of 28 
Aviation Partners Boeing Proprietary 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Left side shown, right side opposite 
 
 
FIGURE 3: PART 3 - OUTBOARD WING AT INBOARD SEGMENT OF STRINGER L-9.5 - HIGH FREQUENCY 
EDDY CURRENT (HFEC) SURFACE INSPECTION AFTER REPAIR 
 (SHEET 1 OF 4)  
A 
RIB 32 
WSTA 
1018.2 
RIB 28 
WSTA 
906.2 
RIB 30 
WSTA 
962.2 
INBD SEGMENT OF 
WING STRINGER  
L-9.5 
C 
INBD 
FWD 
View Looking Up 
B

### Page 26

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 23 of 28 
Aviation Partners Boeing Proprietary 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Left side shown, right side opposite 
 
 
FIGURE 3: PART 3 - OUTBOARD WING AT INBOARD SEGMENT OF STRINGER L-9.5 - HIGH FREQUENCY 
EDDY CURRENT (HFEC) SURFACE INSPECTION AFTER REPAIR 
 (SHEET 2 OF 4)  
1 
WING STRINGER L-9.5 
WING STRINGER L-10 
RIB 30 
WSTA 
962.2 
INBD 
FWD 
View Looking Up 
A

### Page 27

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 24 of 28 
Aviation Partners Boeing Proprietary 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
FIGURE 3: PART 3 - OUTBOARD WING AT INBOARD SEGMENT OF STRINGER L-9.5 - HIGH FREQUENCY 
EDDY CURRENT (HFEC) SURFACE INSPECTION AFTER REPAIR 
 (SHEET 3 OF 4)  
1 
WING STRINGER L-9.5 
WING STRINGER L-10 
RIB 29 
WSTA 
934.2 
INBD 
FWD 
View Looking Up 
B

### Page 28

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 25 of 28 
Aviation Partners Boeing Proprietary 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Left side shown, right side opposite 
The step numbers shown below agree with the numbers shown in the circle symbols in the figure. 
Step Task Name Identification Qty More Data 
1 Inspect Wing Skin around Fastener - 18 (a) 
(a)  Do HFEC surface inspection to detect cracks. Refer to 767 NDT Manual D634T301, Part 6, 
Subject 51-00-01 or 51-00-19 as an accepted procedure.  
 
FIGURE 3: PART 3 - OUTBOARD WING AT INBOARD SEGMENT OF STRINGER L-9.5 - HIGH FREQUENCY 
EDDY CURRENT (HFEC) SURFACE INSPECTION AFTER REPAIR 
 (SHEET 4 OF 4)  
1 
WING STRINGER L-9.5 
WING STRINGER L-10 
RIB 28 
WSTA 
906.2 
INBD 
FWD 
View Looking Up 
C

### Page 29

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 26 of 28 
Aviation Partners Boeing Proprietary 
APPENDIX A: REPORTING INSTRUCTIONS:  
 
1. Document the results of an open hole inspection at the fastener locations with crack indications. Also document 
crack length and in which part, and show crack orientation (direction) on the graphics given in this Appendix.  
2. Send this data to Aviation Partners Boeing. Please complete the form below and fax or email to the attention of 
APB Liaison Engineering at: 
Fax: +1 (206) 767-0535 
Email: leng@aviationpartners.com 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Left Side Shown, Right Side Opposite 
 
FIGURE A: INSPECTION DATA – INBOARD SEGMENT OF STRINGER L-9.5 BETWEEN RIB 30 
(WSTA 962.2) AND RIB 31 (WSTA 990.2) 
(SHEET 1 OF 3)  
ACCESS DOOR 
CUTOUT 
1 
 2 
 4 
3 
 5 
L-9 
L-9.5 
L-10 
FWD 
INBD 
View Looking Up 
RIB 30 
WSTA 
962.2

### Page 30

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 27 of 28 
Aviation Partners Boeing Proprietary 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Left Side Shown, Right Side Opposite 
 
 
 
FIGURE A: INSPECTION DATA – INBOARD SEGMENT OF STRINGER L-9.5 BETWEEN RIB 27 
(WSTA 879.2) AND RIB 28 (WSTA 906.2)  
(SHEET 2 OF 3)  
ACCESS DOOR 
CUTOUT 
6 
7 
9 
 8 
10 
L-9 
L-9.5 
L-10 
RIB 28 
WSTA 
906.2 
FWD 
INBD 
View Looking Up

### Page 31

AVIATION PARTNERS BOEING SERVICE BULLETIN AP767-57-013 
Validation Issue: November 30, 2016 AP767-57-013 
Revision 1:  April 11, 2017 Page 28 of 28 
Aviation Partners Boeing Proprietary 
VARIABLE SERIAL REGISTRY FLIGHT CYCLES FLIGHT HOURS 
# #    
 
LEFT SIDE WING - FINAL HOLE DIAMETER AND CRACK DATA 
CRACK INDICATION: YES or NO 
If YES, please fill out the table below. 
HOLE NUMBER FINAL DIAMETER (IN) EDGE MARGIN (IN) CRACK LENGTH (IN)/PART 
    
    
    
    
    
    
    
    
 
RIGHT SIDE WING - FINAL HOLE DIAMETER AND CRACK DATA 
CRACK INDICATION: YES or NO 
If YES, please fill out the table below. 
HOLE NUMBER FINAL DIAMETER (IN) EDGE MARGIN (IN) CRACK LENGTH (IN)/PART 
    
    
    
    
    
    
    
    
 
 
Figure A: INSPECTION DATA – INBOARD SEGMENT OF STRINGER L-9.5 
(SHEET 3 OF 3)

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
