# B/E Aerospace Service Bulletin 119003-35-011

Copy: No revision named ("Service Bulletn 119003-35-011"), 7 pages: PDF https://openairdocs.org/files/sha256/43/74/437485eac8b917751acbed6e135b4cf114564a46905c56e132f3f5ba4554a056; text https://openairdocs.org/service-documents/be-aerospace/sb-119003-35-011/file/437485eac8b9.md. Rights: © B/E Aerospace. Filed by the FAA in regulations.gov docket FAA-2015-2134; AD 2016-11-20 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [B/E Aerospace](https://openairdocs.org/service-documents/be-aerospace.md)
- Type: Service bulletin (Service Bulletin)
- Number: 119003-35-011
- Page: https://openairdocs.org/service-documents/be-aerospace/sb-119003-35-011

## ADs that cite it (2) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2017-18-12](https://openairdocs.org/ad/2017-18-12.md), effective Oct 16, 2017: No revision named
- [AD 2016-11-20](https://openairdocs.org/ad/2016-11-20.md), effective Jul 15, 2016: No revision named

Also cited in [2 proposed ADs](https://openairdocs.org/service-documents/be-aerospace/sb-119003-35-011/proposed.md).

## Text (7 pages)

Rights: © B/E Aerospace. Filed by the FAA in regulations.gov docket FAA-2015-2134; AD 2016-11-20 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. This text is OCR from a scan. OCR can misread letters and numbers. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1 (OCR)

B/E
AEROSPACE
SERVICE BULLETIN
RISK OF FIRE AND/OR FUNCTIONAL IMPAIRMENT ON UNSERVICEABLE
B/E AEROSPACE PROTECTIVE BREATHING EQUIPMENT (PBE)
Planning Information
A. Effectivity
This Service Bulletin applies to all Protective Breathing Equipment (PBE) with the following part
numbers:
119003-11
119003-21
B. Concurrent Requirements
None.
C. Reason
A PBE with a compromised vacuum-sealed pouch that contains the PBE may present a risk of fire
and/or impaired function.
When new or properly overhauled, the PBE is placed in a vacuum-sealed protective pouch that is
impervious to moisture in the ambient air. If the vacuum seal of the pouch is compromised,
contamination and premature activation of the PBE's air regeneration chemicals can occur, resulting
in a risk of fire and/or a reduction of the chemicals' capacity to support the requirements of a
PBE user if the compromised PBE is donned and actuated. Due to the enclosed nature of the PBE's
hood and the presence of potentially hazardous materials within the PBE, a loss of the pouch's
vacuum seal may put the user at risk of personal injury or death when the compromised PBE is
activated by causing a fire within the hood and/or by degrading the quality of the inhaled gas produced
by the PBE (less oxygen - more carbon dioxide), and also may cause an increase in humidity within or
about the hood that may possibly spread to adjacent areas and/or that may result in fogging of the
fire event.  PBE's lens, thereby impairing a user's ability to engage and combat an unrelated on-aircraft smoke or
WHERE THE RECIPIENT HAS BEEN GIVEN THE EXPRESS RIGHT BY WRITTEN AGREEMENT TO REPRODUCE THE SERVICE BULLETIN), USE AND SALE RIGHTS  REGARDING THE SAME ARE EXPRESSLY RESERVED. IT IS SUBMITTED UNDER A CONFIDENTIAL RELATIONSHIP FOR A SPECIFIC PURPOSE. THE RECIPIENT  AGREES BY ACCEPTING THIS SERVICE BULLETIN NOT TO SUPPLY OR DISCLOSE ANY INFORMATION REGARDING IT TO ANY UNAUTHORIZED PERSON, OR TO  INCORPORATE IN OTHER PROJECTS ANY SPECIAL FEATURES PECULIAR TO THIS DESIGN. ALL PATENT RIGHTS HERETO ARE EXPRESSLY RESERVED BY BIE  THIS SERVICE BULLETIN EMBODIES A PROPRIETARY DESIGN, ORIGINATED BY B/E AEROSPACE AND ALL DESIGN MANUFACTURING REPRODUCTION (EXCEPTING  AEROSPACE, INC.
THIS DOCUMENT CONTAINS U.S. ORIGIN TECHNICAL DATA 9E991 AS DEFINED BY THE UNITED STATES EXPORT ADMINISTRATION REGULATIONS (EAR) (15 CFR 730-  774). AN EXPORT LICENSE MAY BE REQUIRED BEFORE IT IS USED FOR DEVELOPMENT, PRODUCTION OR USE BY FOREIGN PERSONS FROM SPECIFIC COUNTRIES.  THE CONTROLLER OF THIS DATA HAS THE INDIVIDUAL RESPONSIBILITY TO ABIDE BY ALL EXPORT LAWS
04 Feb 2015
Rev. 000  119003-35-011
Page 1 of 7

### Page 2 (OCR)

B/E AEROSPACE
Service Bulletin
D. Description
A PBE pouch that has an intact vacuum seal will tightly conform or cling to the outer surfaces of
the folded PBE contained within the pouch. In contrast, a pouch that has a compromised vacuum seal
will, to varying degrees, exhibit slackness, looseness and a general failure to conform or cling to the
outer surfaces of the folded PBE contained within the pouch. The visual appearance of a
properly-sealed PBE pouch is similar to the visual appearance of vacuum-sealed packages of food
products in which the external packaging closely conforms and clings to the outer surfaces of the
contents of the vacuum-sealed packages.
E. Compliance
All PBEs with the indicated part numbers should be inspected to confirm the integrity of the
vacuum-sealed pouch, as described above, by flight crew before every flight, and by maintenance
personnel no less than once per month.
Refer to B/E Aerospace document 2499-200 for complete pre-flight and normal maintenance
inspection procedures.
F. Approval
This Service Bulletin contains no modification information that revises the approved configuration and
therefore does not require governmental or other regulatory agency approval.
Refer to FAA Advisory Circular AC 20-176A dated 6/1/14 for approval information.
G. Manpower
The following is an estimate to accomplish this service bulletin:
Inspection:  1 minute for 1 person
H. Weight and Balance
Not affected.
Electrical Load Data
None.
Software Accomplishment Summary
Not Applicable.
K. References
2499-200 (Crewmember Protective Breathing Equipment Guidelines for Installation, Use, and Service)
L. Other Publications Affected
None.
M. Interchangeability of Parts
Not Applicable.
04 Feb 2015  119003-35-011
Rev. 000
Page 2 of 7

### Page 3 (OCR)

B/E AEROSPACE
Service Bulletin
II. Material Information
A. Material - Price and Availability
(1) Materials may be purchased from:
B/E Aerospace, Inc.
Commercial Aircraft Products Group
10800 Pflumm Road
Lenexa, KS 66215
Tel: (913) 338-9800
Fax: (913) 469-8419
B. Industry Support Information
Not Applicable.
C. Material Necessary for Each Component
FIG.  ITEM
NO.  NO.  NEW PART NO  QTY  DESCRIPTION  OLD PART NO.  DISPOSITION
N/A  N/A  4406001-001  2  Decal, PBE (Tamper  4406001-001  New / Discard if
Indicator)  removed
KEY: - NOT ILLUSTRATED, RF: Reference, A/R: As Required, RU: Reuse
D. Re-identified Parts
None.
E. Tooling - Price and Availability
None.
III. Accomplishment Instructions
A. Inspection
CAUTION:B/E AEROSPACE STRONGLY RECOMMENDS THAT THE PBE REMAIN INSIDE THE
STOWAGE BOX DURING VISUAL INSPECTION. VISUAL INSPECTION SHALL BE DONE
LOOKING THROUGH THE CLEAR STOWAGE BOX DOOR.
Figures 1, 2, 3, and 4 provide visual guidance to assist in determining whether a pouch has an intact
vacuum seal or has a compromised vacuum seal. It may be necessary to remove the clear door from
the PBE stowage box for a physical inspection in accordance with section III.A.1 or to remove the PBE
from the container for a more thorough physical inspection in accordance with section III.A.2 if it
cannot be determined through a visual inspection.
A PBE pouch with an intact vacuum seal will look and feel tightly contracted around the folded PBE
contained within the pouch, and will not exhibit looseness or bloating.
04 Feb 2015  Rev. 000  119003-35-011
Page 3 of 7

### Page 4 (OCR)

B/E AEROSPACE
Service Bulletin
NOTE: Tamper indicators may be present on the PBE Stowage Box. Inspection procedures of the PBE
are the same if tamper indicator are used or not. If tamper indicators are used, and removed
from the PBE Stowage Box, new tamper indicators will need to be installed per B/E Aerospace
document 2499-200.
(1) Physical Inspection of the Pouch with PBE Installed in Container.
Remove the clear door from the PBE stowage box and squeeze the upper portion of the pouch to
verify whether the foil pouch has an intact vacuum seal or a compromised vacuum seal which has
allowed ambient air to enter the pouch. The seal should feel tightly contracted around the folded
PBE contained within the pouch and will not exhibit looseness or bloating. If any amount of com-
pression and springback (i.e. sponginess) is evident, then the seal should be considered compro-
mised even if the visual inspection appears normal and the PBE unit replaced.
NOTE: The effectiveness of a visual inspection, under some conditions, may or may not be
definitive.
(2) Physical Inspection of the Pouch with PBE Removed from Container.
Remove the clear door from the PBE stowage box and carefully remove the PBE pouch from its
stowage container. Inspect entire pouch to verify whether the foil pouch has an intact vacuum seal
or a compromised vacuum seal which has allowed ambient air to enter the pouch. The seal should
feel tightly contracted around the folded PBE contained within the pouch and will not exhibit loose-
ness or bloating. If any amount of compression and springback (i.e. sponginess) is evident, then
the seal should be considered compromised even if the visual inspection appears normal and the
PBE unit replaced. Minor abrasion of foam covering on the pouch is acceptable as long as vacuum
seal is intact.
definitive.  NOTE:The effectiveness of a visual inspection, under some conditions, may or may not be
All PBEs with the indicated part numbers should be inspected to confirm the integrity of the
vacuum- sealed pouch. Any PBE that is unserviceable due to a loss of its pouch's vacuum seal
should not be used for any purpose whatsoever, including training and demonstration use.
CONDENSED
POUCH
INDICATES
INTACT SEAL
- INFLATED
POUCH
INDICATES
DEGRADED
SEAL
Figure 1
PBE Pouch Seal Indications
04 Feb 2015
Rev. 000  119003-35-011
Page 4 of 7

### Page 5 (OCR)

B/E AEROSPACE
Service Bulletin
Figure 2
Condensed Pouch Indicates Intact Seal
Figure 3
Inflated Pouch Indicates Compromised Seal
04 Feb 2015
Rev. 000
Page 5 of 7

### Page 6 (OCR)

B/E AEROSPACE
Service Bulletin
TAMPER
INDICATOR  TAMPER
INDICATOR
4406001 981
CREW
PBE
MEHO  MANO
100-10090EP
100-100901
Condensed Pouch Indicates Intact Seal  Inflated Pouch Indicates Compromised Seal
Figure 4
PBE Seal Indications - In Stowage Box
Any PBE that has been determined to be unserviceable due to a compromised vacuum-sealed pouch
should be reported immediately to B/E Aerospace at the address noted below. All such PBEs should
be clearly identified as "unserviceable", and dispositioned for return to B/E Aerospace consistent
with all applicable hazardous material/dangerous goods regulations for proper disposal or overhaul
to prevent use of any unserviceable PBE. For further information on proper storage, shipment and/or
disposal of a compromised PBE, see 2499-200, and/or contact B/E Aerospace at the address noted
below.
B/E Aerospace emphasizes the need to make sure that all personnel responsible for the inspection
and verification of the serviceability of PBEs be instructed as to how to determine whether a vacuum-
sealed pouch containing a PBE has an intact vacuum seal or has a compromised vacuum seal. In
addition, all personnel who may be called upon to use the PBE should be instructed in the proper
use and inspection of the equipment prior to use in accordance with the above instructions and
guidelines.
04 Feb 2015
Rev. 000  119003-35-011
Page 6 of 7

### Page 7 (OCR)

BIE AEROSPACE
Service Bulletin
The PBE stowage box and its fixation device should be inspected for cracks, deep scratched, and/or
dents, which mar the appearance of the unit. Check the stowage box door assembly for cracks,
scratches or smears on the clear access door. The vacuum-sealed PBE must be visible through the
clear access door. The tamper indicators, if installed, should be unbroken and should show no
excessive wear.
B. Contact Information
B/E Aerospace, Inc.
Commercial Aircraft Products Group
10800 Pflumm Road
Lenexa, KS 66215
Tel: (913) 338-9800
Fax: (913) 338-8419
04 Feb 2015
Rev. 000  119003-35-011
Page 7 of 7

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
