# Bell Alert Service Bulletin 206L-09-157: Revision A

- Rights: © Bell Textron Inc. Filed by the FAA in regulations.gov docket FAA-2010-0865; AD 2021-15-06 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
- Document: [Bell Alert Service Bulletin 206L-09-157](https://openairdocs.org/service-documents/bell/206l-09-157.md)
- Title as filed: Bell Helicopter ASB 206L-09-157 Rev A
- Pages: 5
- PDF: https://openairdocs.org/files/sha256/84/9d/849dcd83d3d7d497303deb8875d7d37c40bbc8bed8dcdea39de74c890ef8f236
- Page: https://openairdocs.org/service-documents/bell/206l-09-157/file/849dcd83d3d7

## Text

Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

DATE  
ALERT SERVICE BULLETIN 
REVISION NOTICE 
 
AN APPROPRIATE ENTRY SHOULD BE MADE IN THE AIRCRAFT LOGBOOK UPON ACCOMPLISHMENT 
IF OWNERSHIP OF AIRCRAFT HAS CHANGED PLEASE FORWARD TO NEW OWNER 
JUN 10, 2009  
 
 
 
 
 
 
 
 
 
TO:  All Owners/Operators of Bell 206L series Helicopters 
 
 
 
SUBJECT: Revision “A” to Alert Service Bu lletin 206L-09-157: DISC ASSEMBLY 
101584-2, RECALL OF 
 
 
 
Revision “A” to this bulletin adds the date when Bell Helicopter has started to sell disc 
assembly 101584-2 through Spares to the DESCRIPTION section.

### Page 2

NO. 
DA
TE   
PAGE  
DATE  
REV 
  
    
    
ALERT SERVICE BULLETIN 
 
 
  
 
206L-09-157 
 JUN 10, 09 APR 20, 2009 
AN APPROPRIATE ENTRY SHOULD BE MADE IN THE AIRCRAFT LOGBOOK UPON ACCOMPLISHMENT 
IF OWNERSHIP OF AIRCRAFT HAS CHANGED PLEASE FORWARD TO NEW OWNER 
       A
 1 of 4 
 
 
MODEL AFFECTED:  206L series  
 
  
SUBJECT: DISC ASSEMBLY 101584-2, RECALL OF 
 
 
HELICOPT
ERS AFFECTED: 206L Helicopters serial number 45004 through 
45153 and 46601 through 46617. 
  
 206L-1 Helicopters serial number 45154 through 
45790. 
 
 206L-3 Helicopters serial number 51001 through 
51612. 
 
 206L-4 Helicopters serial number 52001 and 
subsequent. 
 
[All 206 helicopters deliver ed new form factory had 
disc assembly P/N 32721-1 installed at delivery] 
 
 
-NOTE- 
 
Each laminate of disc assembly 101584-2 is ink stamped 
with P/N 101584-1. 
 
COMPLIANCE: PART I: F or disk assembly P/N 101584-2 in spares 
stock, immediately after receipt of this bulletin. 
 
PART II: For disk assembly P/N 101584-2 installed 
on helicopter, within the next 100 hours after receipt 
of this bulletin but not to exceed 30 days. 
 
 
DESCRIPTION: 
 
Bell Helicopter found that new disc asse mbly P/N 101584-2 sold through Spares 
beginning March 2009 as an alternate to P/N 32721-1 does not conform to the 
approved Engineering.  This Alert Service Bulletin mandates the removal from service 
of all disc assemblies P/N 101584-2. 
A

### Page 3

ASB 206L-09-157 
Page 2 of 4 
 
 
 
APP
ROVAL: 
 
The engineering design aspects of this bulletin are Transport Canada Civil Aviation 
(TCCA) approved. 
MANPOWER: 
 
No additional man-hours are required to accomplish PART I of this bulletin. 
 
Approximately 1.0 man-hour is required to replace each disc assembly that is affected 
by the ACCOMPLISHMENT INSTRUCTIONS PART II section of this bulletin.  Man-
hours are based on hands-on time, and may vary with personnel and facilities 
available. 
 
 
WARRANTY: 
 
Owners / Operators of Bell Helicopters who comply with the instructions in this Bulletin 
will be eligible to receive a 100% credit towards replacement Disc Assemblies part 
number 32721-1. 
 
To receive this credit:  
 
• Comply with the instructions contained in this Bulletin no later than the applicable 
hours in the “compliance section” of this ASB, or no later than the March 31, 2010. 
• Purchase replacement parts from a Bell approved source. 
• Submit an MMIR to the Bell Warrant y Department referencing this ASB. 
 
Customers who fail to comply with the inst ructions in this Bulletin before the March 31, 
2010 are not eligible for the s pecial warranty credit listed above. There is no labor 
associated with this bulletin. 
 
 
MATERIAL: 
 
Required Material: 
The following material is required for the ac complishment of this bulletin and may be 
obtained through your Bell Helicopter Textron Supply Center. 
 
Part Number Nomenclature Quantity 
   
32721-1 DISC ASSEMBLY A/R

### Page 4

ASB 206L-09-157 
Page 3 of 4 
 
 
SPECIAL TOOLS: 
 
None required 
 
 
ELECTRICAL LOAD DATA: 
 
Not affecte
d 
 
 
REFERENCES: 
 
BHT-206L-MM, Maintenance Manual 
BHT-206L1-MM, Maintenance Manual  
BHT-206L3-MM, Maintenance Manual  
BHT-206L4-MM, Maintenance Manual  
 
 
PUBLICATIONS AFFECTED: 
 
None affected 
 
ACCOMPLISHMENT INSTRUCTIONS: 
 
PART I: For disc assembly in spares stock 
 
-NOTE- 
 
Each laminate of disc assembly 101584-2 is ink stamped 
with P/N 101584-1. 
 
1. Verify if disk assemblies  in spare stock are identifi ed with P/N 101584-2. If a disc 
assembly is identified with P/N 101584-2, refer to the WARRANTY section of this 
bulletin.  
 
PART II: Disc assembly installed on Helicopter 
 
-NOTE- 
 
Each laminate of disc assembly 101584-2 is ink stamped 
with P/N 101584-1. 
 
1. Review helicopter records to determine if Disc Assembly P/N 101584-2 has been 
installed on the helicopter.

### Page 5

ASB 206L-09-157 
Page 4 of 4 
 
 
a. If helicopter records indicate that  a Disc Assembly P/N 101584-2 has been 
installed, proceed with step 2. 
 
b. If helicopter records review indicate s that no Disc Assembly P/N 101584-2 has 
been installed, proceed with step 3.  
 
2. Gain access to the tail rotor drives haft system and replac e Disc Assembly P/N 
101584-2 with serviceable Disc  Assembly P/N 32721- 1 (BHT-206L-MM, Chapter 
66) (BHT-206L1-MM, Chapter 66) (BHT- 206L3-MM, Chapter 65) (BHT-206L4-MM, 
Chapter 65).  
 
3. Make a log book entry to indicate that this bulletin has been accomplished.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
