# Bell Alert Service Bulletin 205-09-102

Copy: Revision A ("Bell Helicopter Textron, Inc. ASB 205-09-102 Rev A"), 5 pages: PDF https://openairdocs.org/files/sha256/3a/ed/3aed4068aa6f7bd7aaf5b16174ac1199a4a5521ba5f276505f485922df93a338; text https://openairdocs.org/service-documents/bell/sb-205-09-102/file/3aed4068aa6f.md. Rights: © Bell Textron Inc. Filed by the FAA in regulations.gov docket FAA-2018-0866, the docket of AD 2020-12-10. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bell](https://openairdocs.org/service-documents/bell.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: 205-09-102
- Latest revision known: 205-09-102, Revision A (OpenAirDocs)
- Page: https://openairdocs.org/service-documents/bell/sb-205-09-102

## Text (5 pages)

Rights: © Bell Textron Inc. Filed by the FAA in regulations.gov docket FAA-2018-0866, the docket of AD 2020-12-10. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

NO. 
  
DATE    
PAGE  
    DATE  
    REV  
ALERT SERVICE BULLETIN 
AN APPROPRIATE ENTRY SHOULD BE MADE IN THE AIRCRAFT LOGBOOK UPON ACCOMPLISHMENT 
IF OWNERSHIP OF AIRCRAFT HAS CHANGED PLEASE FORWARD TO NEW OWNER 
205-09-102 
12-08-09 Nov 09, 2009 
A 1 of 5 
 
 
 
 
MODEL AFFECTED:  205A / 205A-1  
 
  
SUBJECT: TAIL ROTOR BLADE P/N 212-010-750-ALL, 
INSPECTION OF. 
 
 
HELICOPTERS AFFECTED: Model 205A and 205A-1 helicopters serial 
number 30001 through 30039, S/N 30050 through 
30052, S/N 30057 through 30067, S/N 30078 
through 30127 and S/N 30128 through 30332. 
         
  
Tail Rotor Blades P/N 212-010-750-ALL serial 
numbers A-17061 and subseq uent will have the 
intent of this bulletin accomplished prior to delivery. 
 
 
COMPLIANCE: Within the next 200 flight hours or 180 days, 
whichever comes first. Applicable to all installed or 
spare tail rotor blades. 
 
 
DESCRIPTION: 
  
Bell Helicopter has discovered that certain tail rotor bl ades may have manufacturing 
anomalies in the spar area as a result of the chemical milling process. The anomalies 
may be identified as pits and/or corrosion on the spar. Serviceability of the spar will 
consist of removing the pain t on the spar between blade stations 22.5 and 40.0 and 
carrying out a detailed visual inspection wit h a 3-power or higher magnifying glass. A 
filet filled with adhesive r uns spanwise between the blade spar and the skin 2.25 
inches aft of the blade leading edge, bot h inboard and outboard sides. The area to be 
inspected runs along the edge of  the spar filet and a half inch forward of this point. 
(Between 1.75 and 2.25 inch from the leading edge of  the blade and from Blade 
Stations 22.5 to 40.0, both inboard and outboard sides). 
 
 
APPROVAL: 
 
The engineering design aspects of this bulletin are FAA/ODA approved. 
 
A 
 
A

### Page 2

ASB 205-09-102 
Page 2 of 5 
 
 
MANPOWER: 
 
Approximately 10.0 man-hours ar e required to complete this  bulletin.  Man-hours are 
based on hands-on time, and may vary with personnel and facilities available. 
 
 
WARRANTY: 
 
Owners / Operators of Bell Helicopters who comply with the instructions in this Bulletin 
and find chemical milling pits in excess of 0.003 inch deep (Between 1.75 and 2.25 
inch from the leading edge of the blade and from Blade Stations 22.5 to 40.0, both 
inboard and outboard sides) will be eligible to receive a pro-rated credit towards the 
cost of replacement blades. In order to  receive this credit send an e-mail with detailed 
clear photographs of the corrosion pitting together with depth measurements to 
Product Support Engineering psemedium@bellhelicopter.textron.com. 
Please ensure that you include the ship number, blade part numbers, and serial 
numbers with TT on the parts. Once this has been reviewed by Product Support 
Engineering you will be notified with their approval/disapproval.  
 
In addition special warranty consideration to cover the cost of the labor to perform the 
inspection @ $750.00 USD per blade will apply only to those tail rotor blades which 
are new in stock, installed on new ships still under warranty, and or new spare parts 
installed on ships still within the one year/1000hour warranty period.  To receive credit, 
file a VISTA warranty claim referencing this ASB for labor. 
 
To receive the above warranty: 
   
• Comply with the instructions contained in this Bulletin no later 
than the applicable hours or days in the “compliance section” of 
this ASB. 
• Purchase the required applicable TR Blade/Blades from a Bell 
approved source. 
• Submit an MMIR to the Bell Warr anty Department referencing this 
ASB. 
 
Customers who fail to comply with the instructions in this Bulletin before the 30 July 
2010 are not eligible for the special warranty credit listed above. There is no other 
labor or consumables covered under this bulletin. 
 
 
MATERIAL: 
 
Required Material: 
The following material is required for the accomplishment of this bulletin and may be 
obtained through your Bell Helicopter Textron Supply Center. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
A

### Page 3

ASB 205-09-102 
Page 3 of 5 
 
 
 
Part Number Nomenclature  Quantity  
   
212-010-750-133 Tail Rotor Blade Assembly 2 (if required) 
 
Consumable Material: 
 
The following material is required to accomplish this bulletin, but may not require 
ordering, depending on the operator’s consumable material stock levels. This material 
may be obtained through your Bell Helicopter Textron Supply Center 
 
 
 
Part Number Nomenclature  Quantity  Reference  
    
MIL-PRF-23377,TYICLC 
EPOXY 
Primer A/R C-204 
MILC85285TYI-27925 Polyur ethane Coating semi-
gloss white No. 27925 
A/R C-245 
MILC85285,TYI,37038 Poly urethane Coating 
lusterless black No. 37038 
A/R C-245 
MILC87936TYI 5GAL Cleaning Compound A/R  C-318 
TURCO W.O.1 GAL Cleaner A/R  C-344 
TT-N-95,TYII 1GAL A liphatic Naphtha A/R  C-305 
SCOTCHBRITE TY-A Abrasive pad A/R  C-407 
ABRASIVE 240 GRIT Abrasive Cloth or paper A/R  C-423 
CCCC0046 Cheesecloth A/R  C-486 
TT-I735 ISOPROPYL Solvent A/R C-385 
 
  
SPECIAL TOOLS: 
 
None required 
 
  
WEIGHT AND BALANCE: 
 
Not affected. 
 
ELECTRICAL LOAD DATA: 
 
Not affected 
 
 
 
 
 
 
 
 
 
 
A

### Page 4

ASB 205-09-102 
Page 4 of 5 
 
 
REFERENCES: 
 
BHT-205A1-IPB Illustrated Parts Breakdown 
BHT-205A1-MM Maintenance Manual 
BHT-205A1-CR&O Component Repair and Overhaul Manual 
BHT-ALL-SPM 
 
 
PUBLICATIONS AFFECTED: 
 
BHT-205A1-MM Maintenance Manual 
 
 
ACCOMPLISHMENT INSTRUCTIONS: 
 
1. Remove tail rotor hub and blade asse mbly from the helicopter as per BHT-
205A1-MM. 
 
2. Remove blades from the tail rotor hub as per BHT-205A1-CR&O.  
 
3. Remove paint from the spar between t he doubler tip to station 40.0 by sanding 
in a spanwise  direction only using 180-grit or finer abras ive cloth (C-423). Use 
finer grade abrasive cloth once the coat of primer is reached to prevent 
damaging the spar. 
 
 
CAUTION 
 
Pay particular attention not to  damage the underlying spar, 
adhesive and aluminum skin dur ing sanding operation. Any 
damage greater than 0.003 inch deep is cause for rejection 
and the blade must be removed from service. Do not remove 
paint from the skin. 
 
 
4. Ensure that all paint (on the spar only)  is removed from the first 2.25 inches of 
the leading edge (chordwise) and from t he B.S 22.5 (doubler ti p) to B.S. 40.0. 
Refer to Figure 1. This wi ll expose the spar up to the filet between the blade 
spar and skin. A filet f illed with adhesive runs spanwise between the blade spar 
and the skin 2.25 inches aft of t he blade leading edge, both inboard and 
outboard sides. The area to be inspected runs along the edge of the spar filet 
and a half inch forward of this poin t. (Between 1.75 and 2.25 inch from the 
leading edge of the blade and from Blade Stations 22 .5 to 40.0, both inboard 
and outboard sides).

### Page 5

ASB 205-09-102 
Page 5 of 5 
 
 
5. Wipe area with a clean cloth dampened with alcohol (C-385) or aliphatic 
naphtha (C-305) and dry thoroughly. 
 
6. Carry out a detailed visual inspection of the spar for corrosion and/or pitting 
using a 3-power or higher magnifying gla ss. Anomalies on the steel spar 0.003 
inch deep or less must be polished out in accordance with BHT-205A1-MM. 
 
CAUTION 
 
Any defect greater than 0.00 3 inch deep is cause for 
rejection and the blade must be removed from service.  
 
7. If repairs are required, the surface finish of the repair shall be similar to 
surrounding area. 
 
8. Carry out paint touch-up as per BHT-205A1-MM. 
 
9. Install tail rotor blades on tail rotor hub and statically balance. 
 
10. Install tail rotor hub and blade assembly on helicopter and carry out operational 
check as per BHT-205A1-MM. 
 
11. Annotate records to indicate compliance with this bulletin. 
 
 
 
 
Figure 1 
A 
A

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
