# Bell Alert Service Bulletin 205-24-122

Copy: No revision named ("Bell ASB 205-24-122"), 4 pages: PDF https://openairdocs.org/files/sha256/fd/b7/fdb707ee2a5ecccde354c83621d325439982d1b7a116eb9ca699e907a49cd775; text https://openairdocs.org/service-documents/bell/sb-205-24-122/file/fdb707ee2a5e.md. Rights: © Bell Textron Inc. Filed by the FAA in regulations.gov docket FAA-2024-2010; AD 2024-16-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

## Details

- Manufacturer: [Bell](https://openairdocs.org/service-documents/bell.md)
- Type: Service bulletin (Alert Service Bulletin)
- Number: 205-24-122
- Page: https://openairdocs.org/service-documents/bell/sb-205-24-122

## ADs that cite it (1) (OpenAirDocs)

Newest first, with the revision each names, as OpenAirDocs read it from the AD's text.

- [AD 2024-16-01](https://openairdocs.org/ad/2024-16-01.md), effective Sep 4, 2024: No revision named

## Text (4 pages)

Rights: © Bell Textron Inc. Filed by the FAA in regulations.gov docket FAA-2024-2010; AD 2024-16-01 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication. Each page's text from the PDF; open the PDF at a page with #page=N.

### Page 1

ASB 205-24-122 
Page 1 of 4 
Approved for public release. 
 
 
  ALERT SERVICE BULLETIN 205-24-122 
22 April 2024 
 
 
MODEL AFFECTED:  205A/205A-1 
 
SUBJECT: INSPECTION OF CAP ANGLE, P/N 205- 030-207-
005, INTRODUCTION, OF. 
 
HELICOPTERS AFFECTED: Serial numbers 30001 through 30065, 30067 
through 30165, 30167 through 30187, 30189 
through 30296 and 30298 through 30332. 
 
 
COMPLIANCE: Within the next 25 flight hours after the release date of 
this bulletin and every 25 flight hours thereafter. 
 
 
DESCRIPTION: 
 
Bell has investigated reports of fractured 212- 030-191-001 cap angles. Some were 
found during routine inspection and some during the scheduled 100 Hours Tailboom 
Attachment Inspection. The investigation indicates that the model 412/412EP 100 flight 
hour Special Inspection interval established in 2000, introduced by the ASB 412-00-100 
and the FAA AD 2000- 18-09, is not adequate to detect all cracks before complete 
fracture of the cap angle. Back in 2000, no ASB was released to mandate the tailboom 
attachment Special Inspection on the Model 205A/205 A-1. Since the risk of 
cracking/fracture exist s on the 205 -030-207-005 cap angle used on the model 
205A/205-A1, this ASB introduces a recurring 25 flight hours  ta ilboom attachment 
inspection. The Maintenance Manual C hapter 5 Special Inspections section will be 
revised to include this 25 Hours Tailboom Attachment Inspection. 
 
APPROVAL: 
 
The engineering design aspects of this bulletin are FAA approved for FAA certified 
helicopters as listed in the applicable Type Certificate Data Sheet. For non FAA certified 
helicopters, the engineering design aspects of this bulletin are Bell Engineering  
approved.

### Page 2

ASB 205-24-122 
Page 2 of 4 
Approved for public release. 
CONTACT INFO: 
 
For any questions regarding this bulletin, please contact: 
 
Bell Product Support Engineering 
Tel: 1-450-437-2862 / 1-800-363-8023 / productsupport@bellflight.com 
 
MANPOWER: 
 
Approximately 0.5 man-hours are required to complete this bulletin.  This estimate is 
based on hands-on time and may vary with personnel and facilities available. 
 
WARRANTY: 
 
There is no warranty credit applicable for parts or labor associated with this bulletin. 
 
MATERIAL: 
 
None required. 
 
CONSUMABLE MATERIAL: 
 
None required. 
 
SPECIAL TOOLS: 
 
10x Magnifying glass. 
 
WEIGHT AND BALANCE: 
 
Not affected. 
 
ELECTRICAL LOAD DATA: 
 
Not affected. 
 
REFERENCES: 
 
BHT-205A1-IPB Illustrated Parts Breakdown, Chapter 53 
BHT-205A1-MM Maintenance Manual, Chapter 5 
 
PUBLICATIONS AFFECTED: 
 
BHT-205A1-MM Maintenance Manual, Chapter 5

### Page 3

ASB 205-24-122 
Page 3 of 4 
Approved for public release. 
ACCOMPLISHMENT INSTRUCTIONS: 
 
1. Prepare the helicopter for maintenance and gain access to the cap angle in the tail 
rotor servo compartment through the R/H aft fuselage door. 
CAUTION 
 
Do not damage aluminum cap angle or fitting during sealant 
removal. 
 
2. If sealant is present, remove sealant from edge of fitting (Figure 1).  
3. Inspect the cap angle area shown with a 10x magnifying glass and bright light. 
4. If a crack is found, replace the cap angle before further flight. If the helicopter is at a 
location where the cap angle cannot be replaced, contact Product Support 
Engineering. 
5. Touch up primer if damaged during sealant removal.  Paint touch up is optional. Do 
not reapply sealant. 
6. If no cracks are found, the helicopter can be returned to service. 
7. Make an entry in the helicopter logbook and historical service records indicating 
findings and compliance with this Alert Service Bulletin.

### Page 4

ASB 205-24-122 
Page 4 of 4 
Approved for public release. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Figure1. Fuselage Tailboom Attachment Inspection.

---
OpenAirDocs.org is an independent research project of [Contrail Labs](https://contraillabs.com/). It is not affiliated with the FAA or the NTSB. Source documents are U.S. government works in the public domain, except the copies of manufacturers’ service documents, which belong to their rights holders.
